PRODUCT CATALOG Better By Design LANSAS

PRODUCT CATALOG Better By Design LANSAS
PRODUCT CATALOG
EFFECTIVE JANUARY 2015
LANSAS
LANSAS®® PRODUCTS
PRODUCTS ARE
ARE
Better By Design
1.800.452.4902
SINCE
SINCE 1955!
1955!
www.lansas.com
PRODUCT INDEX
PRODUCT
PAGE
SINGLE AND MULTI-SIZE TEST PLUGS AND FLOW-THRU PLUGS
Multi-Size Medium Pressure Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Rupture Protected Domehead Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Multi-Size Domehead™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Multi-Size Flow-Thru™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Single-Size MW™ Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Single-Size Test Plug (SST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Super Flow™ Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Multi-Size Interchange™ Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Single-Size High Pressure Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
Single-Size AR™ & Single-Size Blocking Plug (SSB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Long AR Plugs™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Single-Size Disc Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Mechanical Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Spot Repair Carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
WELL PACKERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
MANHOLE VACUUM TESTING EQUIPMENT
Super Vac & Smart Box Vacuum Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Test Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
AIR TESTING EQUIPMENT
Air Testing Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Line Acceptance / Leak Locating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23
Air Testing Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Air Testing Trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
JOINT TESTERS
Low & High Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Double Bladder Low Pressure Joint Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
HURCO PRODUCTS
Deflection Gauge, Ripcord Ventilator, Smoke Testing Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29
Hydrostatic Test Pump
WASHING BALLS
Single-Size and Multi-Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ACCESSORY ITEMS
“E-Z Plug” Adapters and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Protective Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Hoses, Gauges, Fittings, Hand Pumps, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33
Miscellaneous Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Safety and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Conversion Charts and Formulas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Custom Designs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Multi-Size
MEDIUM PRESSURE PIPE PLUGS
The NEW LANSAS® Multi-Size
Medium Pressure Pipe
W
Plug is HERE!
NE
Currently available in 3 sizes and capable of withstanding
back/test pressures in up to 60 psi.
These unique bladder designs have been tested to the
extreme, in many cases up to five times their required
inflation pressures.
The NEW LANSAS® Multi-Size Medium Pressure Plugs
have the highest rated back/test pressures of any pipe
plugs of the same size.
Each pipe plug is equipped with 2 test ports,
either a 1” or 2” (F) NPT and the second either a 1/4”
or 3/4” (F) NPT.
(Larger diameter bypasses are coming soon!)
The NEW LANSAS® Multi-Size Medium Pressure Plugs
are meant to do the TOUGHEST JOBS out there!
1-800-452-4902 • www.lansas.com
PRICE SHEET ITEM 6
Page 1
RUPTURE PROTECTED
BACK AND FRONT PLUGS
The Lansas® Products Rupture Protected
plugs have a built in air relief valve that will
prevent the plug from being over inflated due to faulty
gauges or operator error. Once the valve cracking
pressure is reached, the Lansas® Relief Valve will open,
relieving the excess air pressure and reset / reseal at or
just below the Required Inflation Pressure for the plug.
FEATURES:
• No more catastrophic plug failures due to faulty gauges. If the gauge is reading
incorrectly and the end-user over-inflates the plug, the relief valve will crack relieving
excess air pressure from the plug and prevent it from failing due to over-inflation.
• Operator error will no longer cause your plug to fail due to over-inflation.
• When the Air Relief Valve cracks, it relieves the excess air pressure in the plug, but does not completely deflate it,
allowing the plug to stay inflated and in service. Unlike other manufacturer’s rupture protection devices that cause
the plug to completely deflate resulting in testing failures, down time on jobs and leaves you with a temporarily
unusable plug, the LANSAS® Products Rupture Protection Air Relief Valve safeguards your plug without the mess
and frustration.
• The Lansas® RP relief valve is recessed mounted to prevent physical damage when the plug is being transported,
during installation or use.
• The Lansas® RP Rubber Dirt Cover helps protect the relief valve against the harsh work environment. Dirt and
debris is kept away from the valve while the RP Rubber Dirt Cover remains in place.
• The Lansas® RP relief valve is a multi-use device and will relieve over and over, unlike other manufacturers who
offer a one time use solution requiring you to purchase replacement units again and again. Our less costly relief
valve will protect your plug for many uses.
• The Lansas® Products RP Rupture Protected Plugs relieve once the plug is over-inflated to approximately 33%
above the Required Inflation Pressure of the plug.
RUPTURE PROTECTED PLUGS
CAUTION:
ALSO AVAILABLE:
Replacement Rubber Dirt Covers
P/N 50-004
Relief Valve Installation Wrench
P/N 08-100RVS
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
REPLACEMENT VALVES:
For 15”-30” and 20”-36” Front & Back Plugs
P/N 21-150
For 24”-48” Front & Back Plugs
P/N 21-151
PART #
ITEM DESCRIPTION
050-1530RP
051-1530RP
15"-30" Back Plug with Rupture Protection
15"-30" Front Plug with Rupture Protection
050-2036RP
051-2036RP
050-2448RP
051-2448RP
20"-36" Back Plug with Rupture Protection
20"-36" Front Plug with Rupture Protection
24"-48" Back Plug with Rupture Protection
24"-48" Front Plug with Rupture Protection
LARGER SIZES ARE COMING!
See Multi-Size Domehead pages 3-5 for details.
LANSAS® PRODUCTS ARE
Page 2
PRICE SHEET ITEM 4
Better By Design
SINCE 1955!
1-800-452-4902 • www.lansas.com
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
™ ™
MULTI-SIZE
DOMEHEAD
PLUGS
MULTI-SIZE
DOMEHEAD
®
Multi-Size
Domehead™
Part No.
051-2448
Drawing is representative of
10" x 16" and larger plugs.
Part No.
051-3660
The Lansas® Domehead™ is the most durable multi-size pipe plug available. The unique design of this plug is covered under
two U.S. patents. The first patent relates to the 2-ply of cross biased tire cord reinforcement (more on larger sizes). This design
allows for controlled expansion of the plug. As this plug inflates it gets larger in diameter and shorter in length. By changing the
shape of the plug the side wall stress is kept to a minimum, and this feature also eliminates the longitudinal tearing (end to end)
found in plugs by other manufacturers.
The second patent covers our superior end design. The ends are reinforced with a steel “spider™” ring wrapped in fabric.
The fabric extends from the spider into the body of the plug. This advanced design transfers the stress of inflation from the steel
base plate to the fabric reinforced spider ring.
These designs, along with the highest quality materials create a line of pipe plugs that are as much as 50% lighter and
substantially more flexible than our competitors.
The Lansas® Domeheads™ are manufactured and stocked with our standard ozone protected natural rubber outer layer.
They are also available with a nitrile or neoprene layer, as well as stainless steel end plates for use in chemical and petroleum
applications.
The 050 Series Domehead™ Back Plugs are designed with lifting eye(s) on both end(s) and a 1/4" inflation port. Larger sizes
have an additional 1/2" inflation port. The 051 Series Domehead™ Front is equipped like the back plug, however, it also includes
a 1/4" + 3/4" test thru port for air testing and pressure monitoring.
Custom Designs Are Always™ Available
1-800-452-4902 • www.lansas.com
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
PRICE SHEET ITEMS 1 & 2
Page 3
Part No.
050-812
Part No. 051-2448 with
069-2448 Protective Sleeve installed
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
Part No.
051-812
SEE PAGES 32-34 FOR ACCESSORIES.
Page 4
PRICE SHEET ITEM 1
1-800-452-4902 • www.lansas.com
EXTEND THE LIFE OF YOUR PLUGS!
Part No.
069-1530
THE LANSAS PROTECTIVE SLEEVES not only
protect the plug while being moved around the job site,
but stays on the plug while inflated in the pipeline.
These sleeves help eliminate damage from pipeline
debris, degraded pipe, and more.
®
PART #
FITS PLUGS WITH NOTED PART NUMBERS
069-1224
050-1224, 051-1224
069-1530
050-1530, 051-1530, 094-1530
21 LBS.
069-2036
050-2036, 051-2036, 094-2036
30 LBS.
069-2448
050-2448, 051-2448, 094-2448, 096-2448, 098-2448
65 LBS.
069-3660
050-3660, 051-3660, 094-3660, 096-3660, 098-36606
78 LBS.
069-4278
050-4278, 051-4278, 094-4278, 096-4278, 098-4278
93 LBS.
069-4872
050-4872, 051-4872, 094-4872, 096-4872, 098-4872
89 LBS.
069-6096
050-6096, 051-6096, 094-6096, 096-6096, 098-6096
166 LBS.
1-800-452-4902 • www.lansas.com
WEIGHT
18 LBS.
EXC
E
FOR LLENT
W USE
RENITH
PLU TAL
GS
PRICE SHEET ITEMS 2 & 19
Page 5
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
™ ™
MULTI-SIZE
DOMEHEAD
MULTI-SIZE
FLOW-THRU
PLUGS
THE MULTI-SIZE FLOW-THRUS™ are built with the
same patented designs as our multi and single-size
Domehead™ plugs. (See pgs. 1-2 for design
characteristics.)
Part No. 093-610
The Flow-Thru™ plug goes one step further by offering a large
bypass within the pipe plug. The bypasses are ideal for doing
a water test or sewer bypass. Lansas® Flow-Thru plugs are
available with standard bypasses up to 8" NPT. 12" threaded
connections and larger flanged connections can be special ordered.
As with any Lansas® plug, the multi-size Flow-Thru's™ can be
manufactured with nitrile or neoprene rubber and stainless steel
components for use in chemical and petroleum applications.
Test caps are available to convert your Flow-Thru™ pipe plugs over
to use in air testing applications (see pg. 36). A PVC cap is supplied with
each plug with up to a 6" NPT by-pass.
Custom Designs Are Always™ Available
Part No. 094-1218 Part No. 098-1218
Two 12" X 18" multi-size Flow-Thru Plugs
are shown; one with a 4" By-Pass, the
other with an 8" By-Pass.
CAUTION:
Page 6
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
PRICE SHEET ITEM 5
36" x 48" with 8" By-Pass
(Custom)
1-800-452-4902 • www.lansas.com
1-800-452-4902 • www.lansas.com
PRICE SHEET ITEM 5
Page 7
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
Patent #4,083,384
™
DOMEHEAD
MW ™MULTI-SIZE
MULTI-WORKER
PLUG
THE LANSAS® MW™ is the most versatile and cost effective
single-size pipe plug available.
020 Series
Our 4” to 24” MW’s™ are molded with “o-ring” sealing ribs
and each plug is equipped with a replaceable bypass pipe.
Our 15” through 24” MW’s™ come with either a 4,” 6,”
or 8” bypass.
For air or water testing, sewer bypass or simply stopping
the flow, the MW™ offers the best value in single size plugs.
Converstion Test Caps are available to allow use of flow-thru pipe plugs in air testing applications (see
pg. 36). A PVC cap is supplied with each plug with up to a 6" NPT by-pass.
*For Multi-Size By-Pass Plugs, see pages 4 and 5.
Page 8
PRICE SHEET ITEM 11
1-800-452-4902 • www.lansas.com
SINGLE-SIZE TEST PLUG (SST)
The LANSAS® SST (Single Size Test) Plug is similar
in function to our M.W. plugs, but the SST is built
with a newly formulated natural rubber compound.
These plugs are the most durable, versatile, and
toughest single size plugs available today.
The SST Plug is designed with multi-function in mind.
Available in 8”, 10”, and 12” sizes, each of these have a
3” female aluminum by-pass. These plugs can be used
to stop flow, for sewer by-passing, or for air testing.
An air test conversion cap comes supplied with
every SST Plug.
SST Plug shown with our NEW Triple
Test SMART HOSE, available in 25'
or 50' lengths.
Part No. 472-25 & 472-50
CAUTION:
Test Cap Packages
545-01
545-02
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
Conversion Caps shown with optional air test fittings.
VANDERLANS AND SONS, INC.
CORPORATE OFFICE: LODI, CALIFORNIA
Toll Free 1-800-452-4902
(209) 334-4115 • Sales Fax (209) 339-8260
STOCKING WAREHOUSES:
Atlanta, GA (770) 509-9309
Houston, TX (832) 831-4458
Chicago, IL (800) 452-4902
1-800-452-4902 • www.lansas.com
PRICE SHEET ITEM 9
Page 9
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
SINGLE & MULTI-SIZE
MULTI-SIZE SUPER-FLOW
DOMEHEAD™ ™ PLUGS
THE LANSAS® SUPER-FLOW™ PIPE PLUGS are designed with the largest bypasses available. These
pipe plugs are excellent for use in flow diversion and manhole rehab projects.
Plugs and hose sold separately.
Hose sold per foot in 5' increments.
A “TEE” configuration with three plugs,
three hoses and a “TEE” fitting.
Shown with two 24" Super
Flow™ Plugs and optional
20" By-Pass hose
Page 10
PRICE SHEET ITEM 12
1-800-452-4902 • www.lansas.com
MULTI-SIZE INTERCHANGE ™ PLUGS
(REMOVABLE ENDS)
INTERCHANGE PLUGS
Lansas® manufactures pipe plugs with interchangeable ends.
These plugs can be selected with the exact bypass needed to fit
your application. Pipe plug sizes start at 14” and can be custom
fabricated as large as 96” in diameter. The bolt-on covers can be
equipped with threaded bypass connections up to 12” (M) NPT,
flanged connections or an open tube end for use as a
™
12" Super Flow™ Super-Flow style plug.
18"x24"
Interchange™
Plug w/10"
Bypass
4" NPT
For example: As pictured, this 18” x 24” Multi-Size
Interchange™ Plug body, could have covers with –
4” (M) NPT, 6” (M) NPT, 8” (M) NPT, a 12” tube end
or a 14” flanged bypass.
Sizes Available: 12” x 24”
15" x 30"
24" x 36"
6" NPT
8" NPT
15" x 21"
18" x 24"
8" Flanged By-pass
IZE
NEW SBLE!
AVAILA
Custom Designs Are Always™ Available
1-800-452-4902 • www.lansas.com
PRICE SHEET ITEM 13
Page 11
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
™
DOMEHEAD
HIGH MULTI-SIZE
PRESSURE
TEST PLUGS
LANSAS® HIGH PRESSURE TEST PLUGS
are designed to seal the host pipe to pressures up to 150 PSI.*
These pipe plugs are equipped with a centered bypass pipe
for inducing your test medium into the pipe. Larger sizes
also include a second bypass for bleeding air out of the
section being tested and monitoring the test pressure.
The plug bladder, which is reinforced with multiple layers of
polyester cord, is bonded to the inner metal mandrel.
When this plug is inflated the ends roll up away
from the mandrel. This allows the bladder to make
contact with the pipe walls without applying
unnecessary stress on the bladder.
These plugs are excellent for use in water mains, force mains
or industrial lines. As with all Lansas® products, the high
pressure test plugs can be custom manufactured to meet
the requirements of your job.
*Blocking/Bracing must be used to prevent the movement
or complete dislodgement of pipe plugs.
(See LANSAS® Safety Instructions at www.lansas.com.
12" High
Pressure Plug
Part No. 045-12
Hydrostatic Pump used for
inflating plug with water.
Part No. 049-00
Part No. 045-66
Page 12
PRICE SHEET ITEM 3
1-800-452-4902 • www.lansas.com
Custom Designs
Are Always™ Available
1-800-452-4902 • www.lansas.com
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
PRICE SHEET ITEM 3
Page 13
®
PRODUCTS
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
Manufactured by Vanderlans & Sons, Inc.
™
A.R.MULTI-SIZE
& SINGLE-SIZE
BLOCKING
PLUGS (SSB)
DOMEHEAD
Developed to block flow in pipelines or for testing, LANSAS®
AR™ PLUGS, 1-1/4” thru 6” feature a zinc plated chain and
ring. The entire range of these plugs through 24” have test
pressure ratings of as much as 15 PSI with air or water.
Our (SSB) SINGLE-SIZE BLOCKING PLUGS
offered in 8,” 10” and 12” sizes with a newly formulated blend
of natural rubber along with the AR™ PLUGS are the
toughest and most dependable single-size plugs
available. The SSB, like the SST comes with a removable
3/8” eye bolt and a removable 1/4” (M) NPT tire
inflation valve.
TYPICAL PIPE APPLICATION
STRAIGHT TEE
CLOSET BEND
TEST TEE
FLOOR DRAIN
*Not equipped with the zinc plated chain and ring. Sizes 6” - 24” have a removable inflation fitting and eye-bolt.
Page 14
PRICE SHEET ITEMS 7 & 8
1-800-452-4902 • www.lansas.com
DISC PLUGS
THE LANSAS® SINGLE-SIZE DISC PLUG
has been around for almost 50 years. Constructed of rolled
channel steel, the standard Disc Plugs come as one-piece
units. The LANSAS® Disc Plug can be used for
construction, rehabilitation, cleaning, and testing.
The bladders for these pipe plugs are reinforced with 2 plys
of polyester tire cord. Larger sizes and CUSTOM DESIGNS
ARE ALWAYS AVAILABLE!
Patent #2,927,609
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
Disc plugs can be sectioned to fit through smaller openings at additional cost.
Split plugs are not recommended for air testing.
1-800-452-4902 • www.lansas.com
PRICE SHEET ITEM 14
Page 15
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
™
LOW MULTI-SIZE
& HIGH PRESSURE
TESTERS
DOMEHEADJOINT
THE LANSAS® SINGLE BLADDER JOINT TESTERS
are made for testing the joints of pipe up to 100 PSI. They are
designed to fit pipe sizes ranging from 24” to 120”. LANSAS® has
manufactured custom joint testers to 21 ft. in diameter and for test
pressures in excess of 200 PSI.
Each LANSAS® joint tester is equipped with a Joint Test Panel and
hoses, as well as a New and Improved adjustable wheel kit to allow
easier transportation through pipelines.
THE LANSAS® JOINT TEST PANEL
is designed for use with air or water. There are no additional
components needed. LANSAS® joint testers can be used to
test virtually any pipe material including concrete, ductile iron,
polyethylene, PVC, and steel, as well as concrete pipes with
plastic liners.
NE
ITE W
M!
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
Page 16
PRICE SHEET ITEM 28
1-800-452-4902 • www.lansas.com
CAUTION:
STAY CLEAR
WHILE TESTING.
THIS JOINT TESTER WAS DESIGNED
AND BUILT FOR A WATER PROJECT
NEAR PHOENIX, ARIZONA. EACH
JOINT OF THIS 21' DIAMETER PIPELINE WAS TESTED AT 30 PSI.
1-800-452-4902 • www.lansas.com
CUSTOM SIZES AND HIGHER
TEST PRESSURE DESIGNS
ARE AVAILABLE
PRICE SHEET ITEM 28
Page 17
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
™
DOUBLEMULTI-SIZE
BLADDERDOMEHEAD
LOW PRESSURE
JOINT TESTERS
THE LANSAS® DOUBLE BLADDER (DB) LOW
PRESSURE JOINT TESTERS design provides up to 9
inches of expansion on the bladders allowing for easier insertion
into pipe, easier maneuvering and placement of the joint tester at
each joint, as well as allowing for testing in a range of pipe types
and deflected (up to 7.5%) fiberglass and plastic pipes.
• Fabric reinforced bladder for longer lasting durability.
• Tests with air or water.
• Tests up to 20 PSI.
• Replacement bladders are field replaceable.
• Heavy duty adjustable wheels for smooth transitions between joints.
• Large testing void allows for testing the porosity of the pipe prior to the actual joint test.
Page 18
PRICE SHEET ITEM 29
1-800-452-4902 • www.lansas.com
MECHANICAL PIPE PLUGS
LANSAS® OFFERS MECHANICAL PIPE PLUGS for every need. Models constructed of cast
iron, aluminum, high-impact ABS or nylon with natural rubber or neoprene gaskets requiring no tools to
install and seal pipe. • SECURE • RELIABLE • INEXPENSIVE • PROVEN • EASY •
602 SERIES
603 SERIES
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
604 SERIES
611 SERIES
1-800-452-4902 • www.lansas.com
PRICE SHEET ITEM 15
Page 19
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
MANHOLE VACUUM TESTING EQUIPMENT
THE LANSAS® SMART-BOX™ VACUUM KIT is a
complete package designed with everything needed to complete
your manhole vacuum testing except the air compressor.
SMART-BOX™ COMPLETE MANHOLE VACUUM TEST KIT
(PART NO. 151-812) INCLUDES:
• (2) 050-812 – 8” x 12” Plugs
• (2) 321-20 – 20’ Inflation Kits w/Gauge
• 110-38 – 38” Flat Plate Test Head
• 123-05 SUPER-VAC™ (Venturi) Vac Generator
Part No. 151-812
• Durable Storage Case
THE LANSAS® SUPER-VAC™ is a lower cost
alternative for manhole vacuum testing. The new
Super-Vac™ will pull over 40 CFM @ 10" Hg of
vacuum. The Super-Vac™ will deliver more than
Part No. 123-05
50% more volume than others on the market.
The unit has no moving parts nor does it require
any maintenance.
LANSAS® is re-introducing the
Engine Driven Vacuum Pump to
the mix of Vacuum Testing
Equipment. Available with
industrial class Honda or Briggs
& Stratton engines. Both are
equipped with an oil lubricated
Gast Vacuum Pump designed
to reduce maintenance
requirements under harsh jobsite
conditions.
Page 20
PRICE SHEET ITEM 20
Part No. 121-00
Honda Engine
Part No. 120-00
Briggs & Stratton Engine
1-800-452-4902 • www.lansas.com
MANHOLE VACUUM TESTING EQUIPMENT
LANSAS® PRODUCTS IS PLEASED
TO ANNOUNCE TRULY MULTI-SIZE
BLADDER STYLE VACUUM
TEST HEADS.
The bladder style units are made of lightweight
aluminum. Our Wide Bladder™ technology gives these
units the largest usage range available in the industry and
allows for field replacement. The Super Wingnut™ makes
adjusting the height of the unit quick and easy.
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
Part No. 110-2127
with Part No. 123-05
SUPER-VAC™
All of our Bladder Style Test Heads are supplied with a
vacuum port, shut off valve, 30" of Mercury vacuum test
gauge, vacuum relief valve, and durable support bar.
The unit seals on the inside diameter of the manhole.
THE LANSAS FLAT PLATE ASSEMBLY'S
®
Part No. 110-38 with Part No. 110-38PC
Plate Saver™
are made out of lightweight cast aluminum plate. Both the 38"
and 44" plates have 3/4" of closed cell foam bonded to the
plate. The soft closed cell pad makes it easy to get a
vacuum seal and yet durable enough to be used over and
over. The plate seals on either the manhole frame or the top
of the manhole concrete structure. Both assemblies
include all of the valves, gauges and fittings to complete
your test.
THE PLATE SAVER™ PROTECTIVE
STORAGE COVER – Most damage to the foam pad
is done during transportation and storage.
For a nominal cost you can save time and money.
Excellent for Rental Companies to protect their investment.
1-800-452-4902 • www.lansas.com
PRICE SHEET ITEM 20
Page 21
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
AIR TESTING KITS
Part No.
453-812
“SMART BOX™”
LINE ACCEPTANCE
AIR TEST KIT
contains an air test panel, your choice of
test plugs, 50' triple hose, 30' inflation
line with gauge and a hand pump; all
contained in a heavy duty plastic box.
PACKAGE OPTIONS:
Part No. 453-08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8" Single Size Plugs
Includes one 035-08 and one 025-08 plug
Part No. 453-610 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6" x10" Multi-Size Domehead Plugs
Includes one 050-610 plug and one 051-610 plug
Part No. 453-812 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8"x12" Multi-Size Domhead Plugs
Includes one 050-812 plug and one 051-812 plug
(SHOWN ABOVE)
The SMART BOX™ Line Acceptance Air Test Kit can be configured with every Multi-Size Domehead™ Front
or Back Plug in the LANSAS® Plug line. Please call for pricing on larger plugs!
LINE ACCEPTANCE AIR TEST KIT
THE LINE ACCEPTANCE KIT
contains an air test control panel, 50'
triple hose, 20' inflation line with gauge
and a hand pump.
Custom Designs
Are Always™ Available
Page 22
PRICE SHEET ITEMS 22 & 23
Part No. 455-00
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
1-800-452-4902 • www.lansas.com
LINE ACCEPTANCE/LEAK LOCATING KIT
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
Part No. 460-500 – Kit with Manual Hose Reel (not shown)
Part No. 461-500 – Kit with Motorized Hose Reel
THE LANSAS® LINE ACCEPTANCE / LEAK LOCATING KITS contain virtually all of
the components necessary to get the job done. All that’s needed is your choice of Lansas® test plugs.
The two kits differ only in the hose reel. The hose reels each have 500' of color coded triple test hose,
a three-way air swivel and are mounted on a heavy duty welded frame. The hose reel shown,
Part No. 465-500, is equipped with an air motor for turning the reel,
lubrication system and three-way control valve. Our other unit,
Part No. 466-500, is equipped with a hand crank for turning the reel.
PACKAGE CONTAINS:
Part No.
479-22
Part No.
470-00
Part No.
465-500
Part No. 477-10
10' PANEL TO REEL HOSE
Part No.
310-00
Part No.
500-00
Part No.
510-00
Part No.
321-20
VANDERLANS AND SONS, INC.
CORPORATE OFFICE: LODI, CALIFORNIA
Toll Free 1-800-452-4902
(209) 334-4115 • Sales Fax (209) 339-8260
STOCKING WAREHOUSES:
Atlanta, GA (770) 509-9309
Houston, TX (832) 831-4458
Chicago, IL (800) 452-4902
1-800-452-4902 • www.lansas.com
PRICE SHEET ITEM 21
Page 23
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
AIR TESTING ACCESSORIES
CAUTION:
Part No. 465-500
500' HOSE REEL
with Air Motor
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
TRIPLE HOSE
TEST FITTINGS
NEW V&ED
O
IMPRU
RES!
FEAT
Part No. 21-004
Part No. 470-00
AIR TEST CONTROL PANEL
with 3/4" test area valve and hose connection
Part No. 485-1030
0-10-30 PSI
LIQUID FILLED RETARD GAUGE
1/4" CBM
Part No.
530-60
Part No. 21-025
Part No. 21-007
471 SERIES TRIPLE HOSE
with 3/4" test area hose
Part No. 479-22
SPACE HOSE
Part No.
510-00
Part No. 500-00
MANHOLE JACK
Part No. 501-00
REPLACEMENT
SPOOL
Part No. 10-00 MANHOLE WINCH
with 600' of 3/16" Plastic Coated Cable
Part No. 511-00 Same with Footage Counter
Part No. 512-00 Replacement Counter
Page 24
PRICE SHEET ITEM 25
Part No. 472
SMART TRIPLE TEST HOSE
Valves and gauges needed for plug inflation and testing
1-800-452-4902 • www.lansas.com
LANSAS® AIR TESTING TRAILER UNIT
AT LANSAS, OUR AIR TEST TRAILER
Part No. 450-00
is built using a Wells Cargo brand trailer. Our standard
unit is 6' x 8' and comes complete with:
• A 500' triple hose reel with an air motor drive,
• An electric start Honda motor on a 19 cfm air
compressor,
• An air test panel; and
• 50' of triple test hose.
Air test trailers can be custom built as desired.
PLUGS AND OTHER ACCESSORIES ARE SOLD SEPARATELY
SINGLE & MULTI-SIZE WASHING BALLS
LANSAS® SINGLE- AND MULTI-SIZE WASHING BALLS
are designed with diagonal ribbing along the periphery. This design,
along with adequate head pressure, creates a water vortex action
along the pipe walls. This action will wash away packed sand, sludge,
rock, grease, and other debris. The multi-size washing ball is built with
the same design and construction as our domehead plugs. These balls
have a water fill port that allows the user to control the buoyancy. This
feature enhances the performance of these products.
CAUTION:
SINGLE & MULTI-SIZE WASHING BALLS
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
PART #
FOR
PIPE
SIZE
MINIMUM
PIPE
DIAMETER
MAXIMUM
PIPE
DIAMETER
REQUIRED
INFLATION
PRESSURE
PRODUCT DIMENSIONS
LENGTH DIAMETER WEIGHT
200-04
4"
3.5"
4.5"
INFLATE
7.5"
3.0"
1.0 LBS.
200-06
6"
5.5"
6.5"
UNTIL
8.5"
5.0"
2.0 LBS.
200-08
8"
7.5"
8.5"
THE
10.5"
7.0"
5.0 LBS.
200-10
10"
9.5"
10.5"
BALL
12.5"
9.0"
6.5 LBS.
200-12
12"
11.5"
12.5"
FITS
14.5"
11.0"
10.0 LBS.
200-15
15"
14.5"
15.5"
SNUG
17.5"
14.0"
12.0LBS.
210-1518
15"-18"
14.5"
18.5"
INFLATE
25.0"
10.0"
18.0 LBS.
210-1824
18"-24"
17.5"
24.5"
UNTIL
32.0"
14.0"
50.0 LBS.
210-2030
20"-30"
19.5"
30.5"
THE
42.0"
16.0"
60.0 LBS.
210-2436
24"-36"
23.0"
36.5"
BALL
55.0"
16.0"
80.0 LBS.
210-3648
36"-48"
35.0"
48.5"
FITS
84.0"
22.0"
120.0 LBS.
210-4860
48"-60"
47.0"
60.5"
SNUG
76.0"
34.0"
175.0 LBS.
See page 24 for information on
manhole winches and jacks.
1-800-452-4902 • www.lansas.com
PRICE SHEET ITEMS 16, 17 & 24
Page 25
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
WELL-PACKERS
THE LANSAS® WELL-PACKERS have many applications. They are
commonly used for taking water samples from different levels in the well.
Another use is to isolate sections of the well to prevent contaminates from
entering the pump system.
Lansas® packers are manufactured with multiple layers of fabric reinforcement
to withstand several hundred PSI. All Lansas® packers are made to order in
sizes ranging from 1" to 24" using either carbon or stainless steel. You may
also choose to use nitrile, neoprene or natural rubber.
Submersible
Pump Inside
Drop Pipe
18" Well-Packer
L
Inflation
Line
Between Packer
Sampling
Lower
Packer Inflation
Line
Inflation
Line
L
Pump
Below Packer
Sampling
Complete our
CUSTOM WELL-PACKER
INFORMATION FORM
at the LANSAS® website
or call now for pricing!
L
Inflation
Line
12" Well-Packer
Grouting
Grout
Inflation
Tube
L
Relining
Deteriorated
Casing
Page 26
CALL LANSAS® PRODUCTS FOR PRICING
Deteriorated
Casing or
Open Hole
Packer
10" Well-Packer
New Casing
1-800-452-4902 • www.lansas.com
SPOT REPAIR CARRIER
THE LANSAS® SPOT REPAIR
(Point Repair) CARRIER
was designed for use with most of the Spot or
Point Repair Systems on the market today.
Our carriers are designed with cord reinforced
natural rubber for flexibility and durability.
The Ball Style Ends and small diameters allow these
units to pass through most offset joints. Wheels are
also available by special order.
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
1-800-452-4902 • www.lansas.com
Custom Designs Are Always™ Available
PRICE SHEET ITEM 18
Page 27
® IS
A MASTER DIST
Manufactured by Vanderlans & Sons, Inc.
RIPCORD SMOKER AND SUPER RIPCORD SMOKER
We’re not just Blowin’ Smoke!
Now equipped with the Superjet™ high performance and super heating
muffler which atomizes the LiquiSmoke™ fluid resulting in nearly 100% burn.
HURCO has the World’s Most Complete Smoke Testing System. Efficient and
cost effective, smoke testing has become the world-wide standard for
finding leaks in sewer and plumbing systems and HURCO is the standard
bearer providing all you need to manage a complete smoke testing
program better and more profitably.
HYDROSTATIC TEST PUMPS (OLD FAITHFUL)
We’re Pumped Up for our water main test!
Hydrostatic testing insures the quality installation of new or repaired water
mains and sewer force mains. HURCO’s line of hydrostatic test pumps are engineered for reliability and durability with low cost maintenance and nearly
wear-free operation. HURCO pumps can handle up to 10% chlorine solutions
and has a unique manifold system which eliminates leak points, reducing
the amount of work required to repair the pump or replace diaphragms. It
also features a bypass relieve valve reducing the risk of pump damage.
DEFLECTION GAUGES (Aluminum or Steel)
No Other Gauge MEASURES UP
HURCO’s Stationary Steel Gauges, Multi-Size Steel Gauges and new
aluminum Whistle Gauges™ are manufactured with exact laser precision,
clearly marked and serialized with part number and ASTM information,
and the industry’s only full line of gauges manufactured with the correct
number of skids to accurately gauge deflection. These gauges are field
certifiable without proving rings, sized to fit through 24” manhole
openings and powder coated for a durable finish.
RIPCORD VENTILATOR – STRINGER KITS
Serious CFM for a
Safe Manhole!
HURCO’s RIPCORD and Super RIPCORD™ feature precision
™
balanced cast aluminum impellers for maximum air movement at high resistance. (See www.lansas.com for additional specifications.) HURCO also offers a “Stringer Kit” for
retrieving ropes and cables for TV inspection equipment,
cleaning equipment and deflection gauges.
See the Stringer Kits, Rope Reels and Parachutes on page 29.
Page 28
PRICE SHEET ITEMS 55-60
1-800-452-4902 • www.lansas.com
RIBUTOR FOR
STRINGER KITS, ROPE REELS, PARACHUTES
Retrieving and Running Ropes and Cables
MADE EASY!
HURCO also offers a “Stringer Kit,” Rope Reels and Parachutes for running
and retrieving ropes and cables for close-circuit TV gear, cleaning
equipment and their own Whistle Gauge, aluminum deflection gauge.
Reels are available with nylon braided rope in 1/8”, 1/4” and 3/8” diameters
and lengths of 500 or 1,000 feet to meet every need. The HURCO Whistle
Gauge can be run through pipe with a parachute and it is the fastest way to
test. Manhole to manhole in less than 40 seconds, you’ll never pull another
deflection gauge by hand again.
RE-ROUNDER
Repair Pipes Safely without Digging using the
Re•Rounder!
With the HURCO Re-Rounder you can save time and money, eliminate
dangerous work areas and avoid property damage by re-rounding
deflected flexible pipe underground. Re-rounding consolidates and
reshapes the soil around the pipe allowing it to retain its memory and
shape. HURCO’s smooth taper design and cleaner disc will not scar or
damage pipe and design sizes run from 4” to as large as needed, built to
your requirements. Combine HURCO’s Winch System, Cable Puller, and
Roller Guides for a “turn-key” system to make the job easier and quicker.
LANSAS® LONG AR™ ALL-RUBBER PLUGS
THE LONG AR™ is designed to be installed through a cleanout or
floor drain and seal within the wye. With a pressure rating of 15 PSI, these
plugs are excellent for use when pressure testing with air or water.
The long AR plug is supplied with a 36" extension hose and a removable
zinc-plated chain and ring.
All long AR’s
include a 3'
Extension Hose.
See page 32-34
for accessories.
1-800-452-4902 • www.lansas.com
PRICE SHEET ITEMS 10 & 54
Page 29
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
“EZ-PLUG™” ADAPTERS & ACCESSORIES
EZ-Plug™
Bypass Adapter
Model No. 700
EZ-Plug™ Bypass Adapter
Model No. 705
Part No.
#711-23
“E-Z PLUG™” ADAPTERS & ACCESSORIES
PART #
ITEM DESCRIPTION
700-00
E-Z Plug Adapter (Bolt On)
705-00
E-Z Plug Adapter (By-Pass)
711-23
E-Z Plug Pole (fiberglass, telescoping)
8"x12" Back shown
with a model No. 700
E-Z Plug Adaptor
CAUTION:
A model No. 705
E-Z Plug Adaptor
shown with the
new 8" SST Plug
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
THE LANSAS® “E-Z PLUG™” SYSTEM is
designed to provide a safe, fast, and cost effective method
for plugging gravity flow pipe lines. The “E-Z Plug™” system
will utilize an adapter and either a new or existing single or
multi-size test plug or bypass plug. By using the “E-Z
Plug™” system you will eliminate the need to set up for confined space entry when installing test plugs.
The time required to install a test plug will be reduced to
only a few minutes. The cost will be reduced by
thousands of dollars by eliminating ventilators, safety
harnesses, gas detectors, and other costly equipment.
The Lansas® “E-Z Plug™” system is designed to save time
and money on every job.
Use the “E-Z Plug™” adapter on plugs for use in up to
12” lines.
Plugs, Poles and Adapters Sold Separately. See page 32 for hose
accessories.
Page 30
PRICE SHEET ITEM 34
1-800-452-4902 • www.lansas.com
WHAT CAN LANSAS® DO FOR YOU?
®
PRODUCTS
Custom Designs
Are Always™ Available
Manufactured by Vanderlans & Sons, Inc.
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
These 30" plugs have a 24" flange
bypass. Shipped in 8 days.
This “Slip Fit” bladder and
tube shipped in three days.
Custom made High Pressure
High Joint Tester with air
actuated restraints. This
Joint Tester was used in a
special application of a
suspended pipeline with the
restraints keeping the pipes
from separating during the
joint test.
48” Double Bladder Joint Tester
with Restraining Plates
Interchange plug with two 6" threaded
bypasses. Same day shipping.
24” Single-Size
Super Flow Plug
with a built-in 20”
Butterfly Valve.
1-800-452-4902 • www.lansas.com
CALL LANSAS® PRODUCTS FOR PRICING
Page 31
®
PRODUCTS
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
Manufactured by Vanderlans & Sons, Inc.
ACCESSORIES
POLY LIFT ROPE/INFLATION HOSE
NEW
A ND
D
IMPRAN
FEATUOVED
RES!
(1/4" I.D.)
320-20 . . . . . . . . . . . . . . . . . . . . One 20 ft. length (6 meters)
320-30 . . . . . . . . . . . . . . . . . . . . One 30 ft. length (9 meters)
320-40 . . . . . . . . . . . . . . . . . . . One 40 ft. length (12 meters)
Part No.
320-20
Part No.
321-20
POLY LIFT ROPE/INFLATION
NEW
HOSE WITH GAUGE
A ND
D
IMPRAN
FEATUOVED
ASSEMBLY (1/4" I.D.)
RES
Part No.
330-03
!
321-20 . . . . . . . . . . . . . . . . . One 20 ft. length (6 meters)
321-30 . . . . . . . . . . . . . . . . . One 30 ft. length (9 meters)
EXTENSION AIR HOSE
330-02
330-03
330-05
330-10
330-20
330-30
330-40
321-40 . . . . . . . . . . . . . . . . One 40 ft. length (12 meters)
(1/4" I.D.)
. . . . . . . . . . . . . . . . . . One 2 ft. length (60.9 cm)
. . . . . . . . . . . . . . . . . . One 3 ft. length (91.4 cm)
. . . . . . . . . . . . . . . . One 5 ft. length (1.5 meters)
. . . . . . . . . . . . . . . . . One 10 ft. length (3 meters)
. . . . . . . . . . . . . . . . . One 20 ft. length (6 meters)
. . . . . . . . . . . . . . . . . One 30 ft. length (9 meters)
. . . . . . . . . . . . . . . . One 40 ft. length (12 meters)
DURA-LIFT ™ ROPE/INFLATION
HOSE (3/8" HYDRAULIC HOSE) IM NAAENNDDW
P
FEATRUOVED
WITH GAUGE
RES!
!
323-20 . . . . . . . . . . . . . . . . . . . One 20 ft. length (6 meters)
323-30 . . . . . . . . . . . . . . . . . . . One 30 ft. length (9 meters)
323-40 . . . . . . . . . . . . . . . . . . One 40 ft. length (12 meters)
CUSTOM HOSE
LENGTHS AVAILABLE
NEW
A ND
D
IMPRAN
FEATUOVED
RES!
Part No.
323-20
INFLATION ASSEMBLY WITH HOSE,
0-60 PSI GAUGE AND INFLATION FITTING
350-20 . . . . . . . . . . . . . . . . . . . . . . . One 20 ft. length (6 meters)
350-30 . . . . . . . . . . . . . . . . . . . . . . . One 30 ft. length (9 meters)
350-40 . . . . . . . . . . . . . . . . . . . . . . One 40 ft. length (12 meters)
Page 32
PRICE SHEET ITEM 30
Part No.
350-20
1-800-452-4902 • www.lansas.com
ACCESSORIES
TEST CAPS & ACCESSORIES
PART #
Part No.
440-03
ITEM DESCRIPTION
440-01
440-02
440-03
440-04
1”x3/4” Reducer with Test Ports
2”x3/4” Reducer with Test Ports
3” PVC Cap with Test Ports
4” PVC Cap with Test Ports
440-06
443-02
443-03
443-04
443-06
443-08
545-00
545-01
545-02
6” PVC Cap with Test Ports
2” Steel Cap with Test Ports
3” Steel Cap with Test Ports
4” Steel Cap with Test Ports
6” Steel Cap with Test Ports
8” Steel Cap with Test Ports
Conversion Plug 1/2" & 1/4" Test Port
Conversion Plug 3/4" CHI & 1/4" MQC
Conversion Plug 3/4" MQC & 1/4" MQC
Part No.
440-02
Part No.
440-01
Part No.
443-03
Part No.
443-04
Part No.
443-02
TEST AREA HOSE
WITH GAUGE
NEW
A ND
D
IMPRAN
FEATUOVED
RES!
3/4” TEST AREA FILL
LINE/INFLATION LINE
335-20 . . . . . One 20 ft. length (6 meters)
335-30 . . . . . One 30 ft. length (9 meters)
345-20 . . . . . . . . One 20 ft. length (6 meters)
335-40 . . . . One 40 ft. length (12 meters)
345-30 . . . . . . . . One 30 ft. length (9 meters)
345-40 . . . . . . . One 40 ft. length (12 meters)
Part No.
335-20
Part No.
345-20
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
GAUGES
Protective Cover
Supplied with #530-60
530-60 . . . . . . . . . . . . . 0 - 60 PSI
530-300 . . . . . . . . . . . 0 - 300 PSI
NEW
A ND
D
IMPRAN
FEATUOVED
RES!
HIGH PRESSURE
HAND PUMP
w/GAUGE
310-00 . . . . . . . . . . . 0-125 PSI
535-00 . . . . . . . . . . . . . . . Cover
1-800-452-4902 • www.lansas.com
PRICE SHEET ITEMS 30-32 & 35
Page 33
®
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
MISCELLANEOUS PARTS
21-021
21-129
21-001
21-005
21-004
21-025
21-007
Automotive Style
LANSAS® Standard
Industrial Style Fittings
95-097
21-002
4HB-4M
21-003
21-026
4HB-4F
95-098
21-018
95-099
21-008
95-100
21-024
21-014
21-016
21-051
540-18
21-013
21-009
540-14
21-097
21-050
21-098
21-117
12-036
Available 1"-6"
Part No. 750-00
Display Rack for Plugs
Page 34
CALL LANSAS® PRODUCTS FOR PRICING
21-115
1-800-452-4902 • www.lansas.com
TERMS AND CONDITIONS
®
CAUTION:
PRODUCTS
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
Manufactured by Vanderlans & Sons, Inc.
CREDIT
Open account terms will be extended to firms with satisfactory commercial ratings. To avoid delay in
servicing an order, we will accept MasterCard or Visa when proper credit information is not available.
TERMS OF PAYMENT
NET 30 DAYS unless otherwise noted. MINIMUM ORDER IS $100.00 NOT INCLUDING FREIGHT.
RETURNED GOODS POLICY
You must call LANSAS® to get an RMA and authorization for any returns. We do not accept any
returns after 30 days of purchase. All returns are subject to a 25% RESTOCKING FEE. Items sent
without authorization or an RMA will not be accepted for return. Items must be shipped prepaid.
Collect shipments will be refused.
FREIGHT POLICY
All orders will be shipped via one of the many surface carriers available. All shipments are F.O.B.
Lodi, California, to one destination per purchase order. Drop shipment will be made upon request.
We strongly recommend the inspection of all items for freight damage upon arrival of shipment. If
there is damage to the product you need to notify both LANSAS ® AND THE FREIGHT CARRIER.
SPECIFICATIONS
The dimensions, weights, lengths, and other specifics in this and any of our catalogs, telephone
quotes and any correspondence are subject to variations within reasonable tolerances as our
products are handcrafted.
ORDERS
All orders are subject to acceptance by our sales office. We will not be held responsible for delays
or non-fulfillment due to weather, riots, fire, floods, strikes, acts of God or any causes beyond our
control. Invoicing is based on the most current price list.
PAST DUE ACCOUNTS
A SERVICE CHARGE OF 1.5% PER MONTH will be charged on all past due accounts. When
purchasing Lansas ® products the customer agrees that any collection costs, including attorney
or agency fees, will be the customer's responsibility.
VANDERLANS AND SONS, INC.
CORPORATE OFFICE: LODI, CALIFORNIA
Toll Free
1-800-452-4902 • (209) 334-4115 • Sales Fax (209) 339-8260
STOCKING WAREHOUSES:
Atlanta, GA (770) 509-9309 • Houston, TX (832) 831-4458 • Chicago, IL (800) 452-4902
1-800-452-4902 • www.lansas.com
Page 35
SAFETY & WARRANTY INFORMATION
®
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
LANSAS ® PRODUCTS WARRANTY INFORMATION
All LANSAS ® products are warranted against manufacturing defects for a period of two years from the date of sale.
At their option, Vanderlans and Sons, Inc., will either repair or replace any product found to have had a factory
defect. Any product suspected of being defective must be returned, pre-paid freight, to the factory for inspection.
Freight collect shipments will be refused.
No liability shall exist in case of misuse, abuse, over/under inflation or other negligence, or for any costs other than
the replacement costs of the item in question. No liability is, or shall be, assumed for any consequential damages
arising from the use of any device other than stated in this warranty.
Product warranty shall apply only to the original purchaser and is not transferable or assignable.
Manufacturer specifically disavows any other representation, warranty, or liability relating to the condition or use of
this product.
Engines and vacuum pumps not manufactured by Lansas® are subject to their specific manufacturer warranty only.
SAFETY NOTIFICATION
— SAFETY VIDEO AVAILABLE —
Inflatable products are intended for use in piping systems only. Do not inflate product unless totally confined within
proper size pipe.
Each inflatable item is specifically rated for certain pressures under specific conditions. Do not over or under
exceed these pressures, as specified for each device. If in doubt, contact the factory.
All inflatable devices must be used with proper blocking or restraints that meet or exceed the standards of the
industry, consult a registered engineer.
Inflatable devices are designed for inflation in piping only. Device must conform in rated size(s) to piping size.
Through misuse, abuse, improper storage, age or component failure or malfunction, a device may fail. The user is
warned to consider the failure mode of all parts (components) to be used in the system and to provide adequate
safeguards to prevent personal injury, death or property damage in the event of a failure mode occurrence.
All end users must be thoroughly instructed in all safety aspects when using these products and how to provide for
personal protection in the event of a failure mode.
It is the responsibility of the user to check all components for both accuracy and integrity immediately prior to use.
All gauges and pressure components must be checked and certified for function and accuracy.
All end users are cautioned to review specific warnings, ratings, pressures and other information immediately prior
to use. This information may be found in instruction sheets, product specification sheets, catalogs/brochures on
the device, and/or on attached hang tags.
If such information cannot be located, the user is requested to call the factory at (800) 452-4902 for specific
information. Such information will be supplied in written form by FAX or mail upon request. Lansas safety
information can also be found on the internet. Check our website: www.lansas.com.
Do not operate or attempt to use any inflatable device without proper training and complete information regarding
inflatable to be used.
Page 36
1-800-452-4902 • www.lansas.com
USEFUL INFORMATION
®
CAUTION:
Block plugs to prevent moving.
See Safety Instructions on
page 36. Full safety
information sent with each
plug or see www.lansas.com.
PRODUCTS
Manufactured by Vanderlans & Sons, Inc.
HEAD IN FEET REDUCED TO POUNDS PER SQUARE INCH
CONVERTING HEAD FEET OF WATER TO POUNDS PER SQUARE INCH (PSI)
HEAD FEET
1
2
3
4
5
6
7
8
9
10
11
12
13
PSI
. . . . . . . . . . . . . . . . . . . . . 0.43
. . . . . . . . . . . . . . . . . . . . . 0.87
. . . . . . . . . . . . . . . . . . . . . 1.30
. . . . . . . . . . . . . . . . . . . . . 1.73
. . . . . . . . . . . . . . . . . . . . . 2.16
. . . . . . . . . . . . . . . . . . . . . 2.60
. . . . . . . . . . . . . . . . . . . . . 3.03
. . . . . . . . . . . . . . . . . . . . . 3.46
. . . . . . . . . . . . . . . . . . . . . 3.90
. . . . . . . . . . . . . . . . . . . . . 4.33
. . . . . . . . . . . . . . . . . . . . . 4.73
. . . . . . . . . . . . . . . . . . . . . 5.20
. . . . . . . . . . . . . . . . . . . . . 5.63
HEAD FEET
14
15
16
17
18
19
20
21
22
23
24
25
26
PSI
. . . . . . . . . . . . . . . . . . . . . 6.06
. . . . . . . . . . . . . . . . . . . . . 6.49
. . . . . . . . . . . . . . . . . . . . . 6.93
. . . . . . . . . . . . . . . . . . . . . 7.36
. . . . . . . . . . . . . . . . . . . . . 7.79
. . . . . . . . . . . . . . . . . . . . . 8.23
. . . . . . . . . . . . . . . . . . . . . 8.66
. . . . . . . . . . . . . . . . . . . . . 9.09
. . . . . . . . . . . . . . . . . . . . . 9.53
. . . . . . . . . . . . . . . . . . . . . 9.96
. . . . . . . . . . . . . . . . . . . . 10.39
. . . . . . . . . . . . . . . . . . . . 10.82
. . . . . . . . . . . . . . . . . . . . 11.26
HEAD FEET
27
28
29
30
31
32
33
34
35
36
37
38
39
PSI
. . . . . . . . . . . . . . . . . . . . 11.69
. . . . . . . . . . . . . . . . . . . . 12.12
. . . . . . . . . . . . . . . . . . . . 12.56
. . . . . . . . . . . . . . . . . . . . 12.99
. . . . . . . . . . . . . . . . . . . . 13.42
. . . . . . . . . . . . . . . . . . . . 13.86
. . . . . . . . . . . . . . . . . . . . 14.29
. . . . . . . . . . . . . . . . . . . . 14.72
. . . . . . . . . . . . . . . . . . . . 15.15
. . . . . . . . . . . . . . . . . . . . 15.59
. . . . . . . . . . . . . . . . . . . . 16.02
. . . . . . . . . . . . . . . . . . . . 16.45
. . . . . . . . . . . . . . . . . . . . 16.89
HEAD FEET
40
41
42
43
44
45
46
47
48
49
50
PSI
. . . . . . . . . . . . . . . . . . . . 17.32
. . . . . . . . . . . . . . . . . . . . 17.75
. . . . . . . . . . . . . . . . . . . . 18.19
. . . . . . . . . . . . . . . . . . . . 18.62
. . . . . . . . . . . . . . . . . . . . 19.05
. . . . . . . . . . . . . . . . . . . . 19.48
. . . . . . . . . . . . . . . . . . . . 19.92
. . . . . . . . . . . . . . . . . . . . 20.35
. . . . . . . . . . . . . . . . . . . . 20.78
. . . . . . . . . . . . . . . . . . . . 21.22
. . . . . . . . . . . . . . . . . . . . 21.65
Please remember that pressure is pressure regardless of source and that pounds per square inch in all liquid mediums such as air or water create the same forces to the surface of a plug or testing device.
CONVERSION CHART
To Convert:
Multiply By:
To Obtain:
bars
14.5
pounds /square inch
millimeters
.03937
inches
cubic feet
7.48052
gallons
feet
30.478
centimeters
feet of water
.8825
inches of mercury
feet of water
.4335
pounds /square inch
inches
25.4
millimeters
inches of mercury
1.133
feet of water
inches of mercury
.4912
pounds /square inch
kilograms
2.2046
pounds
meters
3.281
feet
pounds /square inch
2.307
feet of water
pounds /square inch
2.036
inches of mercury
π = 3.14
Square Inches = πR 2
Pounds of Force = PSI x Square Inches
VANDERLANS AND SONS, INC.
CORPORATE OFFICE: LODI, CALIFORNIA
Toll Free
1-800-452-4902 • (209) 334-4115 • Sales Fax (209) 339-8260
STOCKING WAREHOUSES:
Atlanta, GA (770) 509-9309 • Houston, TX (832) 831-4458 • Chicago, IL (800) 452-4902
1-800-452-4902 • www.lansas.com
Page 37
VANDERLANS & SONS, INC.
1320 SOUTH SACRAMENTO STREET • LODI, CALIFORNIA 95240
1-800-452-4902
(209) 334-4115 • (209) 339-8260 FAX
www.lansas.com
E-mail: [email protected]
All orders processed at the Corporate Office in Lodi, California
STOCKING WAREHOUSES:
Atlanta, GA (770) 509-9309 • Houston, TX (832) 831-4458
Chicago, IL (800) 452-4902
CATALOG #0115
©2015 VANDERLANS & SONS, INC.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement