PXA-H600
Digital Phase Processor (Ai-NET)
FEATURES
General
Automatic Listening Position Setting
Automatic Subwoofer Sound Reflection
Cancellation
Automatic Subwoofer Linear Phase Setting
Automatic Subwoofer Flat Frequency Setting
Parametric EQ (4 Bands Front and Rear)
6 User Programmable Memory Presets
Remote Control and Microphone Included
Subwoofer Frequency Cutoff
Subwoofer Level Control (0 — +15dB)
Digital Time Correction
Dual-20Bit Sign Magnitude D/A
Converters (front and rear outputs~4 total)
Regulated 1Bit DAC (for subwoofer output)
Two Fiber-Optic Inputs
Ai-Net or RCA Inputs
DC-DC Power Supply
S.T.A.R. Circuitry
Gold Plated RCA Jacks
PHASE
GAIN
TCR
AUTOMATIC SUBWOOFER FINE TUNING
ADJUSTMENT
AUTO ADJ.
SUB.W
OVER
TCR
TCR
FREQUENCY
DIGITAL PHASE PROCESSOR
LEVEL
Q.FACT
PARAME. EQ
BAND
MEMO
F
R
DEF.
EQ
MEMO
PXA-H600 CONTROL UNIT
RUA-4260
MODE/SUB W
DIGITAL PHASE PROCESSOR PXA-H600
SPECIFICATIONS
Number of outputs ........................................................... 3 pair(Front, Rear, Subwoofer)
Number of D/A converters ...................................................................................... 6
DAC resolution ........................................................................... 20 bit(Front and Rear)
...................................................................................................... 1 Bit(Subwoofer)
Number of Presets ............................................................................ 6(User Selectable)
Number of Bands ......................................................................................... 4 (Front)
.................................................................................................................. 4 (Rear)
Parametric Eq Boost/Cut Range ........................................................ ±9dB(1.8dB steps)
Parametric Eq “Q” Factor ....................................................................... 1.0/2.0/5.0
Equalizer Center Frequency Windows* .......................................................................
Band 1 ............................................... (20,25,31.5,40,50,63,80,100,125,160,200,
................................................................... 250,315,400,500,630,800,1k,1.2kHz)
Band 2 ................................................. (50,63,80,100,125,160,200,250,315,400,
............................................................. 500,630,800,1k,1.2k,1.6k,2k,2.5k,3.2kHz)
Band 3 .................................................. (125,160,200,250,315,400,500,630,800,
.............................................................. 1k,1.2k,1.6k,2k,2.5k,3.2k,4k,5k,6.3k,8kHz)
Band 4 ................................................ (315,400,500,630,800,1k,1.2k,1.6k,2k,2.5k,
................................................................ 3.2k,4k,5k,6.3k,8k,10k,12.5k,16k,20kHz)
Time Correction Control Range ................................................... 0 to 20mS(0.1mS steps)
Subwoofer Level Control ........................................................................... 0 to +15dB
Subwoofer Crossover Frequency ............................................ 50—200Hz(1/3 oct/step)
Subwoofer Crossover Slope ............................................ 6—24dB(Frequency Dependent)
Frequency Response .................................................................... 20Hz—20kHz(±1dB)
Total Harmonic Distortion ...................................................................... 0.02%(at 1kHz)
Stereo Separation ........................................................................................... 80dBA
Signal to Noise Ratio .................................................. 114dBA(with optical digital input)
Input Sensitivity .............................................................................................. 850mV
Output Voltage .................................................................................................... 4V
Input Impedance ....................................................................... Greater Than10k ohms
Output Impedance ........................................................................... Less Than1k ohms
Power Requirement ......................................................... 11—16V DC(negative ground)
Controller Size(WxHxD) .......................... 113mmx19mmx40mm(4-7/16”x3/4”x1-9/16”)
Main Chassis Size(WxHxD) .............. 240mmx50mmx160mm(9-7/16”x1-15/16”x6-1/4”)
Controller Weight ................................................................................ 0.35kg(12oz.)
Main Chassis Weight ....................................................................... 1.55kg(3lb. 7oz.)
*Note: Adjacent EQ bands will automatically separated by at least one octave, not allowing some frequencies to be accessed in some bands.
Specifications and design are subject to change without notice
PXA-H600
Digital Phase Processor (Ai-NET)
Part No.
01E26554S01
1
2
3
Remote Out (Blue/ White) Used to Turn On Amplifiers
Remote On (Blue/ White)
Front Spk.
(Optional)
Yellow ~ Battery (+)
3A
Black ~ Chassis Ground
4
1
2
3
4
5
6
5
6
Open
Remote Out (+)
Open
Remote On (+)
Chassis Ground
Battery
Optional 2-channel amplifier
Front Spk.
(Optional)
Front Channel
PHASE
GAIN
TCR
Front Channel
ADJUSTMENT
Rear Spk.
(Optional)
Optional 2-channel amplifier
Rear Spk.
(Optional)
DIGITAL PHASE PROCESSOR PXA-H600
Rear Channel
Subwoofer
(Optional)
Optional RCA
Connectors
Optional 2-channel amplifier
Subwoofer
(Optional)
Note: The Automatic Set-up
feature will not function without
an amplifier and subwoofer
connected to the subwoofer output.
Remote Out
From Radio
Subwoofer Channel
AUTOMATIC SUBWOOFER FINE TUNNING
AUTO ADJ.
TCR
DIGITAL PHASE PROCESSOR
FREQUENCY
TCR
5.5 Meter Controller Cable
Attached to the RUA-4260
DEF.
EQ
MEMO
MODE/SUB W
1
2
3
4
5
6
Any Non Ai-Shuttle Head Unit
(Optional)
Automatic Set-Up Microphone
Part No. ~ 01E26553S01
Note: To Store Parameters into memory,
the microphone must be pluged in to the
PXA-H600
Specifications and design are subject to change without notice
PXA-H600 CONTROL UNIT
LEVEL
Q.FACT
PXA-H600
Digital Phase Processor (Ai-NET)
Part No.
01E26554S01
1
2
3
Remote Out (Blue/ White) Used to Turn On Amplifiers
Remote On (Not Used) Blue/ White
Front Spk.
(Optional)
Yellow ~ Battery (+)
3A
Black ~ Chassis Ground
4
1
2
3
4
5
6
5
6
Open
Remote Out (+)
Open
Remote On (+)
Chassis Ground
Battery
Optional 2-channel amplifier
Front Spk.
(Optional)
Front Channel
PHASE
GAIN
TCR
Front Channel
ADJUSTMENT
Rear Spk.
(Optional)
Optional 2-channel amplifier
Rear Spk.
(Optional)
DIGITAL PHASE PROCESSOR PXA-H600
Rear Channel
Subwoofer
(Optional)
Automatic Set-Up Microphone
Part No. ~ 01E26553S01
Note: To Store Parameters into memory,
the microphone must be pluged in to the
PXA-H600
Optional 2-channel amplifier
Subwoofer
(Optional)
Note: The Automatic Set-up
feature will not function without
an amplifier and subwoofer
connected to the subwoofer output.
2 Meter Ai-NET Cable Included
Subwoofer Channel
Fiber Optic Cable
(Optional)
Note: Fiber Optic Input
is only available with
the CHA-S605 Changer
and will only operate if
CDA-7939, CDA-7949,
TDA-7558, TDA-7559
or CVA-1000 head
units are used.
Ai-CD Shuttle
(Optional)
AUTOMATIC SUBWOOFER FINE TUNNING
AUTO ADJ.
TCR
DIGITAL PHASE PROCESSOR
LEVEL
FREQUENCY
Q.FACT
TCR
5.5 Meter Controller Cable
Attached to the RUA-4260
DEF.
MEMO
EQ
PXA-H600 CONTROL UNIT
MODE/SUB W
5
4
6
6
5
4
¤
Special Note
7
8
3
1
8
7
3
2
Fiber Optic Cable
(Optional)
BOTTOM
COVER
5 Meter Ai-Net Cable
Included with CD Changer
1
Accessory
2
Ground Bus
3
4
Data Bus
Right Signal
NORM~ Default Setting. Use when NOT
connecting an Ai-NET processor
5
Signal Ground
6
Left Signal
EQ/DIV~ Select this position when an
Ai-NET processor is connected
7
8
Battery
Power Supply Ground
NORM EQ DIV
9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
Ai-NET or Ai-Shuttle Head Unit
(Optional)
Ai-NET
Male
Connector
Ai-NET Connector
Ai-NET
B
A
Specifications and design are subject to change without notice
B
2
1
Ai-NET
Female
Connector