18SP605

18SP605
18SP605 – Series 60® Installation Instructions for
the Turbocharger Oil Drain Kit on
EGR Engines
Introduction
Detroit Diesel Corporation has a new oil drain kit for improved oil flow from the
turbocharger on Series 60 engines. The kit is for use on model year 2002, 2003, and
2004 EGR engines.
The key feature of this kit is an increase in the turbocharger oil drain tube diameter,
which will enhance flow.
The oil drain kit (P/N: 23535289) hardware is listed in Table 1.
New Part
Number
Quantity
Description
23532213
1
Oil Drain Tube (mid-setback Turbo)
23532326
2
O-rings, Drain Tube
23532171
1
Oil Drain Adaptor
23550752
2
Bolts, Adaptor
08929285
1
Gasket, Turbo Oil Drain
18SP605
1
Installation Instructions
Table 1
Oil Drain Kit (P/N: 23535289) Components
Installation
Install the oil drain kit as follows:
1. Remove former oil drain tube and gasket.
2. Install the new drain tube (P/N: 23532213), oil drain adaptor, gasket, o-rings, and
bolts supplied in the kit. See Figure 1.
3. Torque bolts to 30-38 N·m (22-28 lb·ft).
18SP605 Page 1 of 2
1.
2.
3.
O-ring, P/N: 23532326
Gasket, P/N: 08929285
Adaptor, P/N: 23532171
Figure 1
4. Bolt, P/N: 23550752
5. Oil Drain Tube, P/N: 23532213
Installing New Oil Drain Tube
®
®
Copyright© 2005 Detroit Diesel Corporation. Detroit Diesel , DDC , and the spinning arrows design are registered trademarks of
Detroit Diesel Corporation. All other trademarks are the property of their respective owners.
18SP605 0502 As technical advances continue, specifications will change. All rights reserved. Printed in U.S.A.
18SP605 Page 2 of 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement