Apexis | IP Wireless / Wired Camera | Quick Installation Guide

More Security, More Convenience
http://www.apexis.com.cn
Wired/Wireless IP Camera
Quick Installation Guide
(IE Browser)
Model: APM-J011-WS
Black
White
Shenzhen Apexis Electronic Co., Ltd.
More Security, More Convenience
http://www.apexis.com.cn
Step 1: Hardware Installation.
1. Install the Wi-Fi antenna.
2. Plug the power adaptor into camera.
3. Plug the network cable into camera, the other side to the router/switch.
Step 2: Software Installation.
Install the follow software:
1. IP Camera Tool: Open the CD, click “IPCamSetup.exe”—“Next”—“Next”—“Close”.
2. ActiveX: Click “Appinstall.exe”—“Next”—“Install”—“Finish”.
After this done, the icon “IP Camera Tool”
will be displayed on desktop.
More Security, More Convenience
http://www.apexis.com.cn
Step 3: Real-time Video Demonstration.
1. Login:
Double click “IP Camera Tool” icon on desktop, search the IP address, choose the
one of your camera, double click to go to IE login interface.
Default username: admin
Password: no password.
2. Choose the language.
English, Chinese, Spanish, Korean, German, French, Italian, Portuguese optional.
3. Choose the work mode.
IE browser: choose ActiveX mode.
Safari, Firefox, Google chrome browser: Server push mode.
Mobile phone: sign in mobile phone mode.
4. Sign in.
Click Sign In, then can get video on real-time.
More Security, More Convenience
http://www.apexis.com.cn
Q1: No pictures problem with ActiveX Settings for IE Browser
If use IE browser to connect the camera for the 1st time, maybe there is no image
displayed, there will be an ActiveX prompt, please click the prompt and choose Run
Add-on, refresh the IE interface, and login the camera again, then will see live video.
If there is still no live video after run ActiveX, please try to enable the ActiveX options of IE
security settings, please do the follow steps:
More Security, More Convenience
http://www.apexis.com.cn
1. Close the firewall of your computer.
2. Change the ActiveX settings, “IE” browser > “Tool” > “Internet Options” >
“Security”> “Custom Level” > “ActiveX control and Plug-ins”, all the ActiveX
options set to be “Enable”: Especially:
Enable: Download unsigned ActiveX controls
Enable: Initialize and script ActiveX controls not marked as safe
Enable: Run ActiveX controls and plu-ins
In
Addition: you can also click “start” menu->“Internet Explorer”, choose “Internet attributes
“ to enter, or via “Control Panel” ->“Internet Explorer”, enter to Security setting.
3. If there is still no image, please close your anti-virus software, and then try step 1 & 2
again.
Q2: How to do Wireless Settings
1. Make sure the router is a wireless router.
2. Make sure the Wi-Fi antenna installed.
3. Make sure whether there is encryption of the WLAN of router, if there is encryption,
More Security, More Convenience
http://www.apexis.com.cn
keep the key.
4. Login the camera, click “Network”>”Wireless Lan Settings”>”Scan”, please scan
2 times, then you will find the WLAN from the list, choose the one you use.
5. If there is no encryption, just click “Submit”, if there is encryption, please input the
key, then click “Submit”.
6. Wait about 30 seconds, the camera will reboot, then unplug the network cable.
Q3: How to use DDNS
1. Login the camera:
Click “Network”>”DDNS Service Settings”.
More Security, More Convenience
http://www.apexis.com.cn
2. Choose the DDNS, there are 2 options:
Manufacturer’s DDNS: This domain is provided by manufacturer.
Third Party DDNS: This domain is provided by the 3rd party, such as Dyndns, Oray,
3322 etc.
Third Party DDNS
If you use third party DDNS, please choose the server you use, such as “3322.org” or
“dyndns.org” as below:
More Security, More Convenience
http://www.apexis.com.cn
You have to register an account firstly, keep the user, password, host, then fill in it.
Note: Only one DDNS can be chosen, for example, if you use manufacturer’s DDNS,
the 3rd one won’t work, if use the 3rd DDNS, the manufacturer’s one won’t work.
3. Change the camera’s port.
The default port of camera is “80”, please change “80” to any other one you like, such
as “81”, “100”, “8091” etc.
Click “OK”, the camera will reboot, wait about 30 seconds.
Make sure the “Subnet Mask”, “Gateway”, “DNS Server” is the same as your router.
4. Set Port Forwarding in the router.
This is the most important step. Set port forwarding in router refer to the IP of your
camera correctly, then the DDNS will work. Because there are so many kinds of
routers from all over the world, so it’s difficult to show a fix steps, but there are some
samples of different routers’ port forwarding settings as below, just for reference:
More Security, More Convenience
http://www.apexis.com.cn
TP-LINK:
(1) Login the router.
(2) Choose “Forwarding”, select “Virtual Servers”
(3) Click the Add New button, pop-up below:
Fill the service port (except 80), IP address of the camera, then click Save
The port and IP address should be the same as Camera.
BELKIN:
(1) Login the router.
(2) Choose “Firewall”, select “Virtual Servers”
(3) Input the port (except 80) and IP address, then click save.
Note: The port and IP address should be the same as Camera.
More Security, More Convenience
http://www.apexis.com.cn
DLINK:
(1) Login the router.
(2) Choose “Advanced”, select “Virtual Servers”
(3) Input the port, IP address, Protocol, then click save.
Note: The “public port” & “private port” should be the same as camera’s port, choose
the protocol to be “both”.
After all these 4 steps done, then you can use the DDNS freely, check the DDNS status
from the camera as below, and get the link of DDNS for internet view.
Step: “Login”>”System”>”Device Info”:
More Security, More Convenience
http://www.apexis.com.cn
Q4: How to know the WAN IP of the device.
1. From internet.
If you want to know the WAN IP of your device, please go to
http://www.whatismyip.com. You will find the current WAN IP of your device.
2. From router.
You can also get the WAN IP address from your router.
Q5: How to register a third party DDNS account
For example, you can go to Dyndns website to register a free account.
http://www.dyndns.org
/ http://www.dyndns.com.
1. Click Sign up FREE.
More Security, More Convenience
2. Choose Sign Up under FREE.
3. Do the follow steps:
Then choose Add to Cart.
http://www.apexis.com.cn
More Security, More Convenience
http://www.apexis.com.cn
4. Set the username and password as below:
After these settings have been done, it will send an email to your mailbox to active
this account.
5. Please login your email box, and open the active link you get by email, then it will go to
the activate page to get this account active.
You will get all the details of your DDNS, such as hostname, WAN IP address etc.
Thanks for your support and attention, for further operation details, please check
the full version user manual of our IP Cameras!
Download PDF

advertising