Section 23: Relays and Timers

Section 23: Relays and Timers
Table of Contents
Section 23
Relays and Timers
Industrial Relays
TeSys™ D IEC Style Instantaneous Control Relays
TeSys™ D IEC Style Contact Blocks and Accessories
TeSys™ K IEC Style Control Relays
TeSys™ K IEC Style Contact Blocks and Accessories
TeSys™ SK IEC Style Control Relays
Square D™ NEMA Style AC Relays
Square D™ NEMA Style DC Relays
Attachments and Accessories for Square D™ NEMA Style Relays
Solid State Relays
Zelio™ SSL Relays
Zelio™ SSM Relays
Zelio™ SSRP and SSRD Relays
Zelio™ SSP Relays
Timers
23-20
23-20
23-21
23-23
23-25
23-26
23-27
23-29
23-31
23-33
23-33
23-34
23-36
23-37
23-39
Zelio™ RE17 Modular Timers
Zelio™ RE48 Panel Mount Timers
Zelio™ REXL Miniature Plug-In Timers
Square D™ JCK General Purpose Plug-In Timers
Control and Measurement Relays
Zelio™ RTC48 Temperature Controllers
Zelio™ REG Temperature Controllers
Zelio™ Current Measurement Relays
Zelio™ Phase Measurement Relays
Zelio™ Voltage Measurement Relays
Zelio™ Level Control Relays and Zelio™ Pump Control Relays
Zelio™ Speed Control Relays, Frequency Control Relays, and
Temperature Control Relays
Power Supplies
Phaseo™ DC Power Supply
Interface Modules
Zelio™ Analog Interface Modules
Solid State Interface Modules
Electromechanical Interface Modules
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
23-2
23-3
23-4
23-6
23-8
23-9
23-10
23-11
23-12
23-13
23-14
23-16
23-17
23-19
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RELAYS AND TIMERS
Zelio™ RSL Interface Relays
Zelio™ RSB Interface Relays
Zelio™ RXG Interface Relays
Zelio™ RXM Plug-In Relays
Sockets and Accessories for Zelio™ RXM Relays
Zelio™ RPM Plug-In Relays
Sockets and Accessories for Zelio™ RPM Relays
Zelio™ RUM Plug-In Relays
Sockets and Accessories for Zelio™ RUM Relays
Zelio™ RPF Power Relays
Square D™ Universal Relays
Square D™ Plug-in Relays
Square D™ Miniature Control Relays
Square D™ Power Relays
23-2
23-39
23-40
23-41
23-42
23-44
23-44
23-45
23-47
23-48
23-49
23-50
23-52
23-53
23-53
23-54
23-54
23-55
23-56
23-1
23
General Purpose Relays
General Purpose Relays
RSL
Refer to Catalog 8501CT0901
schneider-electric.us
Zelio™ RSL Interface Relays
23
Zelio RSL slim interface relays save valuable panel space with a 6 mm width and have a
6 A general purpose load rating. Features include:
• Pre-assembled option: relay and socket are combined into one catalog number.
AC/DC sockets have built-in protection from transients and reverse polarity
• Universal
voltages (see catalog DIA3ED2090304EN-US for more detailed information).
• Accessories, which include isolators, ID tags, and bus jumper save valuable
installation time.
• SPDT (1 C/O) design
Refer to Online Relay Configurator.
Table 23.1: Pre-assembled Relay and Socket Combination (sold in lots of 10)
RELAYS AND TIMERS
Pre-Assembled Catalog Number[1]
Socket Supply Voltage
RSL 1PV••
RSL 1PR••
Screw Connector
Spring Terminal
RSL1PVJU
RSL1PVBU
RSL1PVEU
RSL1PVFU
RSL1PVPU
RSL1PRJU
RSL1PRBU
RSL1PREU
RSL1PRFU
RSL1PRPU
12 Vac/Vdc
24 Vac/Vdc
48 Vac/Vdc
110 Vac/Vdc
230 Vdc
Replacement
Relays
Catalog Number
RSL1AB4JD
RSL1AB4BD
RSL1AB4ED
RSL1AB4ND
RSL1AB4ND
Table 23.2: Relays (sold in lots of 10)
12 Vdc
24 Vdc
48 Vdc
60 Vdc
Relay Coil Voltage[2]
Catalog Number
RSL1AB4JD
RSL1AB4BD
RSL1AB4ED
RSL1AB4ND
Table 23.3: Sockets (sold in lots of 10)
RSL 1AB••
Control Voltage
12 Vac/Vdc
24 Vac/Vdc
48 Vac/Vdc
60 Vac/Vdc
110 Vac/Vdc
230 Vac/Vdc
Socket Type
Spring Terminal
Catalog Number
For Use with Relays:
Screw Connector
Catalog Number
RSLZVA1
RSLZRA1
RSLZVA2
RSLZRA2
RSLZVA3
RSLZVA4
RSLZRA3
RSLZRA4
Table 23.4: Accessories
Description
ID tags (2 sheets of 64 tags)
Bus jumper (10 x 20-pole jumpers)
Butterfly isolator (10 isolators)
RSL1AB4JD
RSL1AB4BD
RSL1AB4ED
RSL1AB4ND
RSL1AB4ND
RSL1AB4ND
Compatibility
Catalog Number
RSLZ5
RSLZ2
RSLZ3
With all RSL and SSL
series sockets
Approvals for RSL Relays
RSL ZVA•
RSL ZRA•
File:
E173076
CCN:
NRNT2,
NRNT8
File:
240278
Class:
3211 04
IEC 61810-1
RoHS Compliant
File:
254977
Class:
3211 07
IEC 61984
RoHS Compliant
Approvals for RSLZ Sockets
RSL Z2
[1]
[2]
23-2
RSL Z3
File:
E172326
CCN:
SWIV2,
SWIV8
Relays are mounted on sockets equipped with LED and protection circuit.
The RSL sockets will accept an AC or DC input voltage; however, the relay always receives a filtered DC voltage.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RSB
General Purpose Relays
Refer to Catalog 8501CT0601
schneider-electric.us
Zelio™ RSB Interface Relays
Table 23.5: Relays (sold in lots of 10)
Number and type of contacts - Thermal current (Ith)
SPDT (1 C/O) -12 A Res.
SPDT (1 C/O) -16 A Res.
DPDT (2 C/O) -8 A Res.
Catalog Number[3]
Catalog Number[3]
Catalog Number[3]
RSB1A120RD
RSB1A160RD
RSB2A080RD
RSB1A120JD
RSB1A160JD
RSB2A080JD
RSB1A120BD
RSB1A160BD
RSB2A080BD
RSB1A120ED
RSB1A160ED
RSB2A080ED
RSB1A120ND
RSB1A160ND
RSB2A080ND
RSB1A120FD
RSB1A160FD
RSB2A080FD
RSB1A120B7
RSB1A160B7
RSB2A080B7
RSB1A120E7
RSB1A160E7
RSB2A080E7
RSB1A120F7
RSB1A160F7
RSB2A080F7
RSB1A120M7
RSB1A160M7
RSB2A080M7
RSB1A120P7
RSB1A160P7
RSB2A080P7
RSB1A120U7
RSB1A160U7
RSB2A080U7
Coil Voltage
RSB2A080BD
RSZE1S48M
6 Vdc
12 Vdc
24 Vdc
48 Vdc
60 Vdc
110 Vdc
24 Vac
48 Vac
120 Vac
220 Vac
230 Vac
240 Vac
Table 23.6: Sockets – 12 A, 300 Vac (sold in lots of 10)
Contact Terminal Arrangement
For Use with Relays
RSB1A120••
RSB1A160••[5]
RSB2A080••
Connection
Box lug connector
Separate[4]
Catalog Number
RSZE1S35M
RSZE1S48M
Table 23.7: Protection Modules (sold in lots of 10)
Diode
Description
Compatibility
RC circuit
RSZ•••••• sockets
(RSB series),
RGZ•••••• sockets
(RXG series)
Diode + green LED
RSB1A120JD Relay
+ RZM031FPD Socket
+ RSZE1S35M Module
Varistor + green LED
Voltage
6–230 Vdc
24–60 Vac
110–240 Vac
6–24 Vdc
24–60 Vdc
110–230 Vdc
6–24 Vac/Vdc
24–60 Vac/Vdc
110–230 Vac/Vdc
Catalog Number
RZM040W
RZM041BN7
RZM041FU7
RZM031RB
RZM031BN
RZM031FPD
RZM021RB
RZM021BN
RZM021FP
Table 23.8: Accessories (sold in lots of 10)
Description
Plastic hold-down ejector clip
ID tags
Compatibility
RSZ•••••• sockets (RSB
series)
Catalog Number
RSZR215
RSZL300
Approvals for RSB Relays
File: E173076
CCN: NRNT2,
NRNT8
RSB1A160BD Relay
+ RSZE1S48M Socket
[4]
[5]
IEC
61810-1
RoHS Compliant
File: 254977
Class: 3211 07
IEC
61810-1
RoHS Compliant
Approvals for RSZ Sockets
File: E173076
CCN: NRNT2,
NRNT8
•
•
[3]
File: 215736
Class: 3211 07
RZM modules are RoHS compliant.
For mounting track, see Mounting Track, End Clamps, Jumpers, Fanning Strips, page
24-19.
To order a relay complete with socket (sold in lots of 20): add suffix S to the catalog numbers selected above.
Example: RSB 2A080RD + RSZ E1S48M becomes RSB 2A080RDS.
The inputs and outputs are on separate sides.
When using the RSB1A160•• relay with socket RSZ E1S48M, terminals 11 and 21, 14 and 24, 12 and 22 must be linked.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-3
RELAYS AND TIMERS
Refer to Online Relay Configurator.
23
RSB1A160F7
Zelio RSB interface relays and sockets provide the optimum combination of robust
performance and space saving for the most demanding applications. Relays are rated at
8 A, 12 A, and 16 A (250 Vac / 28 Vdc). Features include:
• Optional protection modules for protection against electrical transients
• Optional plastic hold-down ejector clips
• Socket or printed circuit board installation options
General Purpose Relays
RXG
Refer to Catalog 8501CT1408
schneider-electric.us
Zelio™ RXG Interface Relays
23
The Zelio RXG interface relay range is comprised of 10 A relays with 1 C/O contact and
5 A relays with 2 C/O contacts all in the same optimal foot print. The mating sockets
feature separate contact terminals with reliable screw connections that attach either to a
convenient 35 mm DIN rail or flexible panel mounting. The entire offer is a complete
system solution with protection modules (diode, diode + LED, RC circuit, or varistor +
LED), plastic ejector/maintaining clip and ID Tags to identify relays.
• Standard hold-down ejector clip integrated with socket
• Optional protection modules for protection against electrical transients
• Industry standard footprint for seamless compatibility with competitive sockets
• UL Listed combination (Relay + Socket) for expedited system certification
Refer to Online Relay Configurator.
RELAYS AND TIMERS
RGZE1S35M Socket
+ RXG12BD Relay
Table 23.9: Relays: Standard Cover, without LED, with Test Button and Lock-Down
Door (sold in lots of 10)
Coil Voltage
6 Vdc
12 Vdc
24 Vdc
48 Vdc
60 Vdc
110 Vdc
24 Vac
48 Vac
120 Vac
220 Vac
230 Vac
RXG11RD
Table 23.10: Relays: Standard Cover, with LED, with Test Button and Lock-Down
Door (sold in lots of 10)
Coil Voltage
RXG22B7
Number and type of contacts - Thermal current (Ith)
SPDT (1 C/O) - 10 A
DPDT (2 C/O) - 5 A
Catalog Number
Catalog Number
RXG11RD
RXG21RD
RXG11JD
RXG21JD
RXG11BD
RXG21BD
RXG11ED
RXG21ED
RXG11ND
RXG21ND
RXG11FD
RXG21FD
RXG11B7
RXG21B7
RXG11E7
RXG21E7
RXG11F7
RXG21F7
RXG11M7
RXG21M7
RXG11P7
RXG21P7
6 Vdc
12 Vdc
24 Vdc
48 Vdc
60 Vdc
110 Vdc
24 Vac
48 Vac
120 Vac
220 Vac
230 Vac
Number and type of contacts - Thermal current (Ith)
SPDT (1 C/O) - 10 A
DPDT (2 C/O) - 5 A
Catalog Number
Catalog Number
RXG12RD
RXG22RD
RXG12JD
RXG22JD
RXG12BD
RXG22BD
RXG12ED
RXG22ED
RXG12ND
RXG22ND
RXG12FD
RXG22FD
RXG12B7
RXG22B7
RXG12E7
RXG22E7
RXG12F7
RXG22F7
RXG12M7
RXG22M7
RXG12P7
RXG22P7
Table 23.11: Relays: Standard Cover, with LED, without Test Button and LockDown Door (sold in lots of 10)
Coil Voltage
RXG13RD
6 Vdc
12 Vdc
24 Vdc
48 Vdc
60 Vdc
110 Vdc
24 Vac
48 Vac
120 Vac
220 Vac
230 Vac
Number and type of contacts - Thermal current (Ith)
SPDT (1 C/O) - 10 A
DPDT (2 C/O) - 5 A
Catalog Number
Catalog Number
RXG13RD
RXG23RD
RXG13JD
RXG23JD
RXG13BD
RXG23BD
RXG13ED
RXG23ED
RXG13ND
RXG23ND
RXG13FD
RXG23FD
RXG13B7
RXG23B7
RXG13E7
RXG23E7
RXG13F7
RXG23F7
RXG13M7
RXG23M7
RXG13P7
RXG23P7
Table 23.12: Relays: Clear Cover, without LED, without Test Button and Lock-Down
Door (sold in lots of 10)
Coil Voltage
RXG15RD
23-4
6 Vdc
12 Vdc
24 Vdc
48 Vdc
60 Vdc
110 Vdc
24 Vac
48 Vac
120 Vac
220 Vac
230 Vac
Number and type of contacts - Thermal current (Ith)
SPDT (1 C/O) - 10 A
DPDT (2 C/O) - 5 A
Catalog Number
Catalog Number
RXG15RD
RXG25RD
RXG15JD
RXG25JD
RXG15BD
RXG25BD
RXG15ED
RXG25ED
RXG15ND
RXG25ND
RXG15FD
RXG25FD
RXG15B7
RXG25B7
RXG15E7
RXG25E7
RXG15F7
RXG25F7
RXG15M7
RXG25M7
RXG15P7
RXG25P7
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RXG
General Purpose Relays
Refer to Catalog 8501CT1408
schneider-electric.us
Table 23.13: Sockets (sold in lots of 10)
Contact Terminal
Arrangement
Separate[6]
Connection
For Use with Relays
Box lug connector
RXG1•••
RXG2•••
Catalog Number
RGZE1S35M[7]
RGZE1S48M[7]
Table 23.14: Protection Modules (sold in lots of 10)
RC circuit
Diode + green LED
Varistor + green LED
Compatibility
RSZ•••••• sockets (RSB
series),
RGZ•••••• sockets (RXG
series)
Catalog Number
RZM040W
RZM041BN7
RZM041FU7
RZM031RB
RZM031BN
RZM031FPD
RZM021RB
RZM021BN
RZM021FP
Table 23.15: Accessories (sold in lots of 10)
RZM031RB
RSZL300
Description
Plastic ejector clip
Socket ID tags
Relay ID tags
For Use With
RXG series (RSZ•••••• sockets)
RXG series relays
Approvals for RXG Relays
File: E173076
CCN: NRNT,
NRNT7[8]
Approvals for RGZ Sockets
File: E172326
CCN: SW1V2,
SW1V8
[6]
[7]
[8]
Catalog Number
RGZR215
RSZL300
RGZL520
File:
E173076
CCN:
NRNT2,
NRNT8
File:
254977
Class:
3211 07
File: 254977
Class: 3211 07
IEC
61810-1
RoHS
Compliant
RoHS
Compliant
The inputs and outputs are on separate sides.
Please note that RGZE1S35M and RGZE1S48M sockets come standard with the RGZR215 ejector clip
When used with the appropriate RGZ socket.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-5
23
RGZE1S48M
Voltage
6 to 230 Vdc
24 to 60 Vac
110 to 240 Vac
6 to 24 Vdc
24 to 60 Vdc
110 to 230 Vdc
6 to 24 Vdc/Vac
24 to 60 Vdc/Vac
110 to 230 Vdc/Vac
RELAYS AND TIMERS
Description
Diode
RXM
General Purpose Relays
Refer to Data Bulletin 8501DB1301
schneider-electric.us
Zelio™ RXM Plug-In Relays
23
Zelio RXM miniature plug-in relays and sockets provide a complete system solution in
response to the most demanding applications ranging from 3 to 12 A. Some of the
features include:
button with removable lock-down door for testing the contacts (depending on
• Test
model)
• Green LED indication of relay status (depending on model)
• Mechanical indication of relay status (standard)
• Optional protection modules to protect against electrical spikes
• Bus jumpers for connecting multiple terminals reduce installation time
Refer to Online Relay Configurator.
RELAYS AND TIMERS
Table 23.16: Relays: without LED, with Test button and Lock-Down Door
(sold in lots of 10)
Coil Voltage
RXZE2M114M Socket
+ RXM4AB2P7 Relay
12 Vdc
24 Vdc
48 Vdc
110 Vdc
220 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
240 Vac
Number and type of contacts - Thermal current (Ith)
DPDT (2 C/O) -12 A Res.
3PDT (3 C/O) - 10 A Res.
4PDT (4 C/O) - 8 A Res.
Catalog Number
Catalog Number
Catalog Number
RXM2AB1JD
RXM3AB1JD
RXM4AB1JD
RXM2AB1BD
RXM3AB1BD
RXM4AB1BD
RXM2AB1ED
RXM3AB1ED
RXM4AB1ED
RXM2AB1FD
RXM3AB1FD
RXM4AB1FD
—
—
RXM4AB1MD
RXM2AB1B7
RXM3AB1B7
RXM4AB1B7
RXM2AB1E7
RXM3AB1E7
RXM4AB1E7
RXM2AB1F7
RXM3AB1F7
RXM4AB1F7
RXM2AB1P7
RXM3AB1P7
—
—
—
RXM4AB1U7
Table 23.17: Relays: with LED, with Test Button and Lock-Down Door
(sold in lots of 10)
RXM2AB1B7
Coil Voltage
12 Vdc
24 Vdc
48 Vdc
110 Vdc
125 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
RXM2AB2BD
Table 23.18: Relays: with LED, without Test Button and Lock-Down Door
(sold in lots of 10)
Coil Voltage
RXM2AB3F7
Number and type of contacts - Thermal current (Ith)
DPDT (2 C/O) -12 A Res.
3PDT (3 C/O) - 10 A Res.
4PDT (4 C/O) - 8 A Res.
Catalog Number
Catalog Number
Catalog Number
RXM2AB2JD
RXM3AB2JD
RXM4AB2JD
RXM2AB2BD
RXM3AB2BD
RXM4AB2BD
RXM2AB2ED
RXM3AB2ED
RXM4AB2ED
RXM2AB2FD
RXM3AB2FD
RXM4AB2FD
—
—
RXM4AB2GD
RXM2AB2B7
RXM3AB2B7
RXM4AB2B7
RXM2AB2E7
RXM3AB2E7
RXM4AB2E7
RXM2AB2F7
RXM3AB2F7
RXM4AB2F7
RXM2AB2P7
RXM3AB2P7
RXM4AB2P7
12 Vdc
24 Vdc
48 Vdc
110 Vdc
125 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
Number and type of contacts - Thermal current (Ith)
DPDT (2 C/O) -12 A Res.
3PDT (3 C/O) - 10 A Res.
4PDT (4 C/O) - 8 A Res.
Catalog Number
Catalog Number
Catalog Number
RXM2AB3JD
—
RXM4AB3JD
RXM2AB3BD
—
RXM4AB3BD
RXM2AB3ED
—
RXM4AB3ED
RXM2AB3FD
—
RXM4AB3FD
—
—
RXM4AB3GD
RXM2AB3B7
—
RXM4AB3B7
RXM2AB3E7
—
RXM4AB3E7
RXM2AB3F7
—
RXM4AB3F7
RXM2AB3P7
—
RXM4AB3P7
Table 23.19: Relays: Low level Contacts, without LED, with Test Button and LockDown Door (sold in lots of 10)
Coil Voltage
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
23-6
Number and type of contacts - Thermal current (Ith)
4PDT (4 C/O) -3 A Res.
Catalog Number
RXM4GB1JD
RXM4GB1BD
RXM4GB1ED
RXM4GB1FD
RXM4GB1B7
RXM4GB1E7
RXM4GB1F7
RXM4GB1P7
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RXM
General Purpose Relays
Refer to Data Bulletin 8501DB1301
schneider-electric.us
Coil Voltage
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
240 Vac
Number and type of contacts - Thermal current (Ith)
4PDT (4 C/O) -3 A Res.
Catalog Number
RXM4GB2JD
RXM4GB2BD
RXM4GB2ED
RXM4GB2FD
RXM4GB2B7
RXM4GB2E7
RXM4GB2F7
RXM4GB2P7
RXM4GB2U7
Table 23.21: Relays: Low Level Contacts, with LED, without Test Button and LockDown Door (sold in lots of 10)
12 Vdc
24 Vdc
48 Vdc
110 Vdc
125 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
•
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Number and type of contacts - Thermal current (Ith)
4PDT (4 C/O) - 3 A Res.
Catalog Number
RXM4GB3JD
RXM4GB3BD
RXM4GB3ED
RXM4GB3FD
—
RXM4GB3B7
RXM4GB3E7
RXM4GB3F7
RXM4GB3P7
23
Coil Voltage
RXM4GB2F7
For sockets and accessories, see page 23-8.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RELAYS AND TIMERS
Table 23.20: Relays: Low Level Contacts, with LED, with Test button and LockDown Door (sold in lots of 10)
23-7
RXM
General Purpose Relays
Refer to Data Bulletin 8501DB1301
schneider-electric.us
Sockets and Accessories for Zelio™ RXM Relays
Refer to Online Relay Configurator.
Table 23.22: Sockets (sold in lots of 10)
Contact Terminal
Arrangement
Mixed[9]
Connection
For Use with Relays
Screw clamp terminals
RXM2•••••[10]
RXM4•••••[10]
RXM2•••••
RXM4•••••
RXM2•••••
RXM3•••••
RXM4•••••
RXM2•••••
23
Box lug connector
Box lug connector
Separate[12]
Spring Terminal
Catalog Number
RXZE2M114[11]
RXZE2M114M[11]
RXZE2S108M[13]
RXZE2S111M[11]
RXZE2S114M
RXZE2S114S
RELAYS AND TIMERS
Table 23.23: Protection Modules (sold in lots of 10)
Description
Diode
RC circuit
RXZE2S108M
Varistor
Voltage
6–250 Vdc
24–60 Vac
110–240 Vac
6–24 Vac/Vdc
24–60 Vac/Vdc
110–240 Vac/Vdc
Compatibility
RXZ•••••• sockets
(RXM series),
RPZF1 and RPZF2
sockets (RPM series)
Catalog Number
RXM040W
RXM041BN7
RXM041FU7
RXM021RB
RXM021BN
RXM021FP
Table 23.24: Accessories (sold in lots of 10)
Description
Metal hold-down clip
Plastic hold-down ejector clip
Bus jumper, 2-pole (Ith: 5 A max. )
DIN rail mounting adapter[14]
Panel mounting adapter[14]
Relay ID tags (sheet of 108 tags)
RXM040W
Socket ID tags
Compatibility
RXZ sockets (RXM series)
RXZ sockets (RXM series)
RXZE2S sockets (RXM series)
RXM series relays,
RPM1 and RPM2 series relays
RXM series relays,
RPM series relays,
RUM series relays
RXZ sockets (RXM series, except
RXZE2M114),
RUZS sockets (RUM series)
Catalog Number
RXZ400
RXZR335
RXZS2
RXZE2DA
RXZE2FA
RXZL520
RXZL420
Approvals for RXM Relays
RXZ400
File: E164862
CCN: NLDX,
NLDX7[15]
Approvals for RXZ Sockets
File: E172326
CCN: SWIV2,
SWIV8
[9]
[10]
[11]
[12]
[13]
[14]
[15]
23-8
File:
E164862
CCN:
NLDX2,
NLDX8
File:
230765
Class:
3211 07
File: 230765
Class: 3211 07
IEC
61984
IEC
61810-1
RoHS
Compliant
RoHS
Compliant
The inputs and outputs are mixed on both sides.
When mounting relay RXM2••••• on socket RXZE2M••••, the thermal current must not exceed 10 A.
Thermal current Ith: 10 A
The inputs and outputs are on separate sides.
Thermal current Ith: 12 A
Test button and lock-down door become inaccessible.
When used with the appropriate RXZ socket.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RPM
General Purpose Relays
Refer to Catalog DIA3ED2090304EN-US
schneider-electric.us
Zelio™ RPM Plug-In Relays
Zelio RPM plug-in relays and sockets provide a complete system solution for the most
demanding applications up to 15 A. Some of the features include:
• Test button with removable lock-down door for testing the contacts (depending on
model)
• Green LED indication of relay status (depending on model)
• Mechanical indication of relay status (standard)
• Optional modules to protect against electrical spikes
Table 23.25: Relays: without LED, with Test Button and Lock-Down Door
(sold in lots of 10)
Coil Voltage
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
RPM13BD
Table 23.26: Relays: with LED, with Test Button and Lock-Down Door
(sold in lots of 10)
Coil Voltage
RPM23P7
Number and type of contacts - Thermal current (Ith)
SPDT (1 C/O) - 15 A
DPDT (2 C/O) - 15 A
3PDT (3 C/O) - 15 A
4PDT (4 C/O) - 15 A
Res.
Res.
Res.
Res.
Catalog Number
Catalog Number
Catalog Number
Catalog Number
RPM11JD
RPM21JD
RPM31JD
RPM41JD
RPM11BD
RPM21BD
RPM31BD
RPM41BD
RPM11ED
RPM21ED
RPM31ED
RPM41ED
RPM11FD
RPM21FD
RPM31FD
RPM41FD
RPM11B7
RPM21B7
RPM31B7
RPM41B7
RPM11E7
RPM21E7
RPM31E7
RPM41E7
RPM11F7
RPM21F7
RPM31F7
RPM41F7
RPM11P7
RPM21P7
RPM31P7
RPM41P7
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
23
RPZF4 Socket
+RPM42P7 Relay
Number and type of contacts - Thermal current (Ith)
SPDT (1 C/O) - 15 A
DPDT (2 C/O) - 15 A
3PDT (3 C/O) - 15 A
4PDT (4 C/O) - 15 A
Res.
Res.
Res.
Res.
Catalog Number
Catalog Number
Catalog Number
Catalog Number
RPM12JD
RPM22JD
RPM32JD
RPM42JD
RPM12BD
RPM22BD
RPM32BD
RPM42BD
RPM12ED
RPM22ED
RPM32ED
RPM42ED
RPM12FD
RPM22FD
RPM32FD
RPM42FD
RPM12B7
RPM22B7
RPM32B7
RPM42B7
RPM12E7
RPM22E7
RPM32E7
RPM42E7
RPM12F7
RPM22F7
RPM32F7
RPM42F7
RPM12P7
RPM22P7
RPM32P7
RPM42P7
Table 23.27: Relays: with LED, without Test Button and Lock-Down Door
(sold in lots of 10)
Coil Voltage
RPM33BD
12 Vdc
24 Vdc
48 Vdc
110 Vdc
125 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
Number and type of contacts - Thermal current (Ith)
SPDT (1 C/O) - 15 A
DPDT (2 C/O) - 15 A
3PDT (3 C/O) - 15 A
4PDT (4 C/O) - 15 A
Res.
Res.
Res.
Res.
Catalog Number
Catalog Number
Catalog Number
Catalog Number
RPM13JD
RPM23JD
RPM33JD
RPM43JD
RPM13BD
RPM23BD
RPM33BD
RPM43BD
RPM13ED
RPM23ED
RPM33ED
RPM43ED
RPM13FD
RPM23FD
RPM33FD
RPM43FD
—
—
—
—
RPM13B7
RPM23B7
RPM33B7
RPM43B7
RPM13E7
RPM23E7
RPM33E7
RPM43E7
RPM13F7
RPM23F7
RPM33F7
RPM43F7
RPM13P7
RPM23P7
RPM33P7
RPM43P7
RPM43BD
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RELAYS AND TIMERS
Refer to Online Relay Configurator.
23-9
RPM
General Purpose Relays
Refer to Catalog DIA3ED2090304EN-US
schneider-electric.us
Sockets and Accessories for Zelio™ RPM Relays
Table 23.28: Sockets (sold in lots of 10)
Contact Terminal Arrangement
Mixed[16]
Connection
Screw terminals
23
For Use with Relays
RPM1•••
RPM2•••
RPM3•••
RPM4•••
Catalog Number
RPZF1
RPZF2
RPZF3
RPZF4
Table 23.29: Protection Modules (sold in lots of 10)
Description
Diode
Voltage
6–250 Vdc
RELAYS AND TIMERS
24–60 Vac
110–240 Vac
RC circuit
110–240 Vac
RPZF2
6–24 Vac/Vdc
24–60 Vac/Vdc
110–240 Vac/Vdc
Varistor
24 Vac/Vdc
240 Vac/Vdc
Compatibility
RXZ sockets (RXM
series),
RPZF1, RPZF2
RPZF3
RPZF4
RXZ sockets (RXM
series),
RPZF1, RPZF2
RPZF3
RPZF4
RXZ sockets (RXM
series),
RPZF1, RPZF2
RPZF3
RPZF4
RPZF3
RPZF4
Catalog Number
Compatibility
Catalog Number
RPZF3
RPZF4
RUW101MW
Compatibility
Catalog Number
RPZF1
RPM1•••
RPM2•••
RPM3•••
RPM4•••
RPM1•••
RPM2•••
RPM3•••
RPM4•••
RXM series relays,
RPM series relays,
RUM series relays
RPZR235
RPZ1DA
RXZE2DA
RPZ3DA
RPZ4DA
RPZ1FA
RXZE2FA
RPZ3FA
RPZ4FA
RXM040W
RUW240BD
RXM041BN7
RXM041FU7
RUW241P7
RXM021RB
RXM021BN
RXM021FP
RUW242B7
RUW242P7
Table 23.30: Timer Module[17] (sold in lots of 1)
Description
On-delay timer, interval timer,
repeat cycle timer/starting on-delay,
repeat cycle timer/starting off-delay,
off-delay timer, one-shot timer,
timing on de-energization, on-delay
timer
RXM041BN7
Voltage
24–240 Vac/Vdc
Table 23.31: Accessories (sold in lots of 10)
Description
Metal hold-down clip (for single-pole relays)
DIN rail mounting adapter [18]
RUW241P7
Panel mounting adapter[19]
ID tags (sheet of 108 tags)
RUW101MW
Approvals for RPM Relays
File: E164862
CCN: NLDX,
NLDX7[20]
Approvals for RPZ Sockets
RPZ1DA
RXZL520
File: E172326
CCN: SWIV2,
SWIV8
File:
E164862
CCN:
NLDX2,
NLDX8
File:
230765
Class:
3211 07
File: 230765
Class: 3211 07
IEC
61810-1
IEC
61810-1
RoHS
Compliant
RoHS
Compliant
RPZ3FA
[16]
[17]
[18]
[19]
[20]
The inputs and outputs are mixed on both sides.
See timer module description (selection of functions and time delays) in catalog DIA3ED2090304EN-US.
Test button and lock-down door become inaccessible
Test button and lock-down door become inaccessible
When used with the appropriate RPZ socket.
23-10
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RUM
General Purpose Relays
Refer to Catalog DIA3ED2090304EN-RUM-US
schneider-electric.us
Zelio™ RUM Plug-In Relays
Zelio RUM plug-in relays and sockets provide a complete system solution for the most
demanding applications up to 10 A. Some of the features include:
• Test button with lock-down door for testing the contacts (depending on model)
• Green LED indication of relay status (depending on model)
• Mechanical indication of relay status (standard)
• Optional protection modules to protect against electrical spikes
• Bus jumpers for connecting multiple terminals reduce installation time.
Pins
RUZSF3M Socket
+ RUMF32BD Relay
Coil Voltage
12 Vdc
24 Vdc
48 Vdc
60 Vdc
110 Vdc
125 Vdc
220 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
Octal
RUMC31F7
Blade
Number and type of contacts - Thermal current (Ith)
DPDT (2 C/O) -10 A Res.
3PDT (3 C/O) -10 A Res.
Catalog Number
Catalog Number
RUMC21JD
RUMC31JD
RUMC21BD
RUMC31BD
RUMC21ED
RUMC31ED
—
RUMC31ND
RUMC21FD
RUMC31FD
—
RUMC31GD
—
RUMC31MD
RUMC21B7
RUMC31B7
RUMC21E7
RUMC31E7
RUMC21F7
RUMC31F7
RUMC21P7
RUMC31P7
RUMF21JD
RUMF31JD
RUMF21BD
RUMF31BD
RUMF21ED
RUMF31ED
RUMF21FD
RUMF31FD
RUMF21B7
RUMF31B7
RUMF21E7
RUMF31E7
RUMF21F7
RUMF31F7
RUMF21P7
RUMF31P7
Table 23.33: Relays: with LED, Test Button, and Lock-Down Door
(sold in lots of 10)
Pins
RUMF22BD
12 Vdc
24 Vdc
48 Vdc
60 Vdc
110 Vdc
125 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
Octal
RUMC23F7
Coil Voltage
Blade
Number and type of contacts - Thermal current (Ith)
DPDT (2 C/O) -10 A Res.
3PDT (3 C/O) -10 A Res.
Catalog Number
Catalog Number
RUMC22JD
RUMC32JD
RUMC22BD
RUMC32BD
RUMC22ED
RUMC32ED
—
RUMC32ND
RUMC22FD
RUMC32FD
—
RUMC32GD
RUMC22B7
RUMC32B7
RUMC22E7
RUMC32E7
RUMC22F7
RUMC32F7
RUMC22P7
RUMC32P7
RUMF22JD
RUMF32JD
RUMF22BD
RUMF32BD
RUMF22ED
RUMF32ED
RUMF22FD
RUMF32FD
RUMF22B7
RUMF32B7
RUMF22E7
RUMF32E7
RUMF22F7
RUMF32F7
RUMF22P7
RUMF32P7
Table 23.34: Relays: with LED, without Push Button, and Lock-Down Door
(sold in lots of 10)
Pins
Octal
Blade
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Coil Voltage
12 Vdc
24 Vdc
48 Vdc
60 Vdc
110 Vdc
125 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
12 Vdc
24 Vdc
48 Vdc
110 Vdc
125 Vdc
24 Vac
48 Vac
120 Vac
230 Vac
Number and type of contacts - Thermal current (Ith)
DPDT (2 C/O) -10 A Res.
3PDT (3 C/O) -10 A Res.
Catalog Number
Catalog Number
RUMC23JD
RUMC33JD
RUMC23BD
RUMC33BD
RUMC23ED
RUMC33ED
—
RUMC33ND
RUMC23FD
RUMC33FD
—
RUMC33GD
RUMC23B7
RUMC33B7
RUMC23E7
RUMC33E7
RUMC23F7
RUMC33F7
RUMC23P7
RUMC33P7
RUMF23JD
RUMF33JD
RUMF23BD
RUMF33BD
RUMF23ED
RUMF33ED
RUMF23FD
RUMF33FD
—
—
RUMF23B7
RUMF33B7
RUMF23E7
RUMF33E7
RUMF23F7
RUMF33F7
RUMF23P7
RUMF33P7
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-11
23
Table 23.32: Relays: without LED, with Test Button, and Lock-Down Door
(sold in lots of 10)
RELAYS AND TIMERS
Refer to Online Relay Configurator.
RUM
General Purpose Relays
Refer to Catalog DIA3ED2090304EN-RUM-US
schneider-electric.us
Sockets and Accessories for Zelio™ RUM Relays
Refer to Online Relay Configurator.
Table 23.35: Sockets (sold in lots of 10)
Contact Terminal Arrangement
Connection
Mixed [21]
23
Box lug connector
(screw terminals)
Separate[22]
For Use with Relays
RUMC2•••••
RUMC3•••••
RUMC2•••••
RUMC3•••••
RUMF2•••••
RUMF3•••••
Catalog Number
RUZC2M
RUZC3M
RUZSC2M
RUZSC3M
RUZSF3M
Table 23.36: Protection Modules (sold in lots of 10)
RELAYS AND TIMERS
Diode
RC circuit
RUZC2M
Description
Compatibility
RUZ··· sockets (RUM
series)
Varistor
Voltage
6–250 Vdc
110–240 Vac
24 Vac/Vdc
240 Vac/Vdc
Catalog Number
RUW240BD
RUW241P7
RUW242B7
RUW242P7
Voltage
Catalog Number
Table 23.37: Timer Module[23] (sold in lots of 1)
RUW241P7
Description
On-delay timer, interval timer,
repeat cycle timer/starting on-delay,
repeat cycle timer/starting off-delay,
off-delay timer, one-shot timer,
timing on de-energization, on-delay
timer.
Compatibility
RUZ··· sockets (RUM
series)
24–240 Vac/Vdc
RUW101MW
Table 23.38: Accessories (sold in lots of 10)
Description
Metal hold-down clip
Bus jumper, 2-pole (Ith: 5 A)
Relay ID tags (sheet of 108 tags)
RUW101MW
Socket ID tags
Compatibility
RUZ sockets (RUM series)
RUZS sockets (RUM series)
RXM series relays,
RPM series relays,
RUM series relays
RXZ sockets (RXM series, except
RXZE2M114),
RUZS sockets (RUM series),
Catalog Number
RUZC200
RUZS2
RXZL520
RUZL420
Approvals for RUM Relays
RUZS2
File: E164862
CCN: NLDX,
NLDX7[24]
Approvals for RUZ Sockets
File: E172326
CCN: SWIV2,
SWIV8
File:
E164862
CCN:
NLDX2,
NLDX8
File:
230765
Class:
3211 07
File: 230765
Class: 3211 07
IEC
61810-1
IEC
61810-1
RoHS
Compliant
RoHS
Compliant
RUZC200
[21]
[22]
[23]
[24]
The inputs and outputs are mixed on both sides.
The inputs and outputs are on separate sides.
See timer module description (selection of functions and time delays) in catalog DIA3ED2090304EN-RUM-US.
When used with the appropriate RUZ socket.
23-12
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RPF
General Purpose Relays
Refer to Catalog DIA3ED2090304EN-RPF2-US
schneider-electric.us
Zelio™ RPF Power Relays
Zelio RPF power relays respond to the most demanding applications up to 30 A.
Features include:
• UL Listed
• Sealed construction
• Motor load ratings: 1 hp @ 120 Vac / 3 hp @ 240 Vac (N/O contacts only)
• DIN rail and panel mounting capability
• Short circuit rating of 5,000 A rms @ 3 hp, 240 Vac (N/O contacts only)
RPF2AP7
Table 23.39: Relays (sold in lots of 10)
Coil Voltage
12 Vdc
24 Vdc
24 Vac
120 Vac
230 Vac
Number and type of contacts - Thermal current (Ith)
DPDT (2 C/O) - 30 A at 277 Vac,
20 A at 28 Vdc, 3A (NC)
Catalog Number
RPF2BJD
RPF2BBD
RPF2BB7
RPF2BF7
RPF2BP7
DPST (2 N/O) - 30 A at 277 Vac,
20 A at 28 Vdc
Catalog Number
RPF2AJD
RPF2ABD
RPF2AB7
RPF2AF7
RPF2AP7
RELAYS AND TIMERS
Refer to Online Relay Configurator.
RPF2BBD
File: E43641
CCN: NLDX, NLDX7
•
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
File:
040787
Class:
3211-07
IEC
61810-1
RoHS
Compliant
For mounting track (DIN rail), see Mounting Track, End Clamps, Jumpers, Fanning
Strips, page 24-19.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-13
23
Approvals for RPF Relays
Type K
General Purpose Relays
Refer to Catalog 8501CT1406
schneider-electric.us
Square D™ Universal Relays
8501K relays are designed for multipole switching applications at 240 Vac or lower.
These relays have industry standard wiring and pin terminal arrangements which allow
for their use as replacements for many competitive relays without wiring or hardware
modifications.
23
•
•
•
8501KPDR12V60
•
•
•
•
10 A relays
DPDT or 3PDT
Green pilot light option
8501KFR13V20
Motor load (hp) ratings
DPDT latching models available
AC or DC operation
RoHS Compliant
Table 23.40: Relays: Standard Cover, without LED
Coil Voltage
RELAYS AND TIMERS
Pins
Octal
8501KUDR12P14V60
8501NR61
Blade
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
120 Vac
240 Vac
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
120 Vac
240 Vac
Number and Type of Contacts - Thermal current (Ith)
DPDT (2 C/O) - 10 A
3PDT (3 C/O) - 10 A
Catalog Number
Catalog Number
8501KPDR12V51
8501KPDR13V51
8501KPDR12V53
8501KPDR13V53
8501KPDR12V56
8501KPDR13V56
8501KPDR12V60
8501KPDR13V60
8501KPR12V14
8501KPR13V14
8501KPR12V20
8501KPR13V20
8501KPR12V24
8501KPR13V24
8501KUDR12V51
8501KUDR13V51
8501KUDR12V53
8501KUDR13V53
8501KUDR12V56
8501KUDR13V56
8501KUDR12V60
8501KUDR13V60
8501KUR12V14
8501KUR13V14
8501KUR12V20
8501KUR13V20
8501KUR12V24
8501KUR13V24
Table 23.41: Relays: Flange Mount Cover
Coil Voltage
Pins
Blade
8501NR52
8501NR82
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
120 Vac
240 Vac
Number and Type of Contacts - Thermal current (Ith)
DPDT (2 C/O) - 10 A
3PDT (3 C/O) - 10 A
Catalog Number
Catalog Number
8501KFDR12V51
8501KFDR13V51
8501KFDR12V53
8501KFDR13V53
8501KFDR12V56
8501KFDR13V56
8501KFDR12V60
8501KFDR13V60
8501KFR12V14
8501KFR13V14
8501KFR12V20
8501KFR13V20
8501KFR12V24
8501KFR13V24
Table 23.42: Relays: Standard Cover, with LED
Coil Voltage
Pins
Octal
Blade
8501NR52 Socket
+8501KPR13P14V2 Relay
8501NR82 Socket
+8501KUDR12P14V Relay
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
120 Vac
240 Vac
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
120 Vac
240 Vac
Table 23.43: Sockets
Contact Terminal
Arrangement
Mixed
Separate
[1]
Number and Type of Contacts - Thermal current (Ith)
DPDT (2 C/O) - 10 A
3PDT (3 C/O) - 10 A
Catalog Number
Catalog Number
8501KPDR12P14V51
8501KPDR13P14V51
8501KPDR12P14V53
8501KPDR13P14V53
8501KPDR12P14V56
8501KPDR13P14V56
8501KPDR12P14V60
8501KPDR13P14V60
8501KPR12P14V14
8501KPR13P14V14
8501KPR12P14V20
8501KPR13P14V20
8501KPR12P14V24
8501KPR13P14V24
8501KUDR12P14V51
8501KUDR13P14V51
8501KUDR12P14V53
8501KUDR13P14V53
8501KUDR12P14V56
8501KUDR13P14V56
8501KUDR12P14V60
8501KUDR13P14V60
8501KUR12P14V14
8501KUR13P14V14
8501KUR12P14V20
8501KUR13P14V20
8501KUR12P14V24
8501KUR13P14V24
Connection
Screw
Connector
Screw
Connector
For Use with
Relays
8501KPR12•••
8501KPDR12•••
8501KPR12•••
8501KPDR12•••
8501KPR13•••
8501KPDR13•••
8501KPR13•••
8501KPDR13•••
8501KPR12•••
8501KPDR12•••
8501KPR12•••
8501KPDR12•••
8501KPR13•••
8501KPDR13•••
8501KPR13•••
8501KPDR13•••
8501KUR12•••
8501KUDR12•••
8501KUR12•••
8501KUDR12•••
8501KUR13•••
8501KUDR13•••
8501KUR13•••
8501KUDR13•••
Sold in Lots
of
Catalog Number[1]
1
8501NR51
10
8501NR51B
1
8501NR61
10
8501NR61B
1
8501NR52
10
8501NR52B
1
8501NR62
10
8501NR62B
1
8501NR82
10
8501NR82B
1
8501NR82
10
8501NR82B
Please note that the B suffix only designates quantities of 10 and is not printed on the socket.
23-14
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Type K
General Purpose Relays
Refer to Catalog 8501CT1406
schneider-electric.us
Table 23.44: Accessories (Sold in Lots of 10)
Description
Metal Restraining Srap
Metal Hold-Down Clip
8501NH7
For Use With
8501NR51 sockets
8501NR52 sockets
8501NR62 sockets
8501NR82 sockets
8501NR52 sockets
8501NR62 sockets
8501NR82 sockets
Sold in Lots of
1
Catalog Number
8501NH7
8501NH52
10
8501NH82
File: E3190
CCN: NLDX,
NLDX7[2]
File: E3190
CCN:
NLDX2,
NLDX8
File:
260367
Class:
3211 07
IEC
61810-1
RoHS
Compliant
Approvals for 8501NR Sockets
8501NH82
File: E66924
CCN: SWIV2,
SWIV8
File: 211268
Class: 3211 07
IEC
61810-1
RoHS
Compliant
23
8501NH52
RELAYS AND TIMERS
Approvals for 8501 KPR, KUR, and KFR Relays
[1]
[2]
Please note that the B suffix only designates quantities of 10 and is not printed on the socket.
When used with the appropriate 8501NR socket.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-15
Type R
General Purpose Relays
Refer to Catalog 8501CT1409
schneider-electric.us
Square D™ Plug-in Relays
8501R miniature plug-in relays have a 15 A resistive rating. The compact size of these
relays makes them ideal for downsizing equipment and applications where space is at a
premium.
23
•
•
•
•
•
•
SPDT through 4PDT
AC or DC operated
Horsepower rated
Socket compatible
Green LED pilot light option
Silver alloy contacts
Table 23.45: Relays: Standard Cover, without LED
8501RS41P14V20
8501RSD42P14V51
Coil Voltage
RELAYS AND TIMERS
12 Vdc
24 Vdc
110 Vdc
12 Vac
24 Vac
120 Vac
240 Vac
Number and Type of Contacts - Thermal current (Ith)
SPDT (1 C/O) - 15 A DPDT (2 C/O) - 15 A 3PDT (3 C/O) - 15 A 4PDT (4 C/O) - 15 A
Catalog Number
Catalog Number
Catalog Number
Catalog Number
8501RSD41V51
8501RSD42V51
8501RSD43V51
8501RSD44V51
8501RSD41V53
8501RSD42V53
8501RSD43V53
8501RSD44V53
8501RSD41V60
8501RSD42V60
8501RSD43V60
8501RSD44V60
8501RS41V36
8501RS42V36
8501RS43V36
8501RS44V36
8501RS41V14
8501RS42V14
8501RS43V14
8501RS44V14
8501RS41V20
8501RS42V20
8501RS43V20
8501RS44V20
8501RS41V24
8501RS42V24
8501RS43V24
8501RS44V24
Table 23.46: Relays: Standard Cover, with LED
Coil Voltage
8501RS43P14V20
8501RS44P14V20
12 Vdc
24 Vdc
110 Vdc
12 Vac
24 Vac
120 Vac
240 Vac
Number and Type of Contacts - Thermal current (Ith)
SPDT (1 C/O) - 15 A DPDT (2 C/O) - 15 A 3PDT (3 C/O) - 15 A 4PDT (4 C/O) - 15 A
Catalog Number
Catalog Number
Catalog Number
Catalog Number
8501RSD41P14V51 8501RSD42P14V51 8501RSD43P14V51 8501RSD44P14V51
8501RSD41P14V53 8501RSD42P14V53 8501RSD43P14V53 8501RSD44P14V53
8501RSD41P14V60 8501RSD42P14V60 8501RSD43P14V60 8501RSD44P14V60
8501RS41P14V36
8501RS42P14V36
8501RS43P14V36
8501RS44P14V36
8501RS41P14V14
8501RS42P14V14
8501RS43P14V14
8501RS44P14V14
8501RS41P14V20
8501RS42P14V20
8501RS43P14V20
8501RS44P14V20
8501RS41P14V24
8501RS42P14V24
8501RS43P14V24
8501RS44P14V24
Table 23.47: Sockets
Contact Terminal
Arrangement
Separate[4]
8501NR41 Socket
+8501RS41P14V20 Relay
Connection
Screw Connector
8501NR42 Socket
+8501RSD42P14V51 Relay
For Use with
Relays
8501RS41•••
8501RSD41•••
8501RS42•••
8501RSD42•••
8501RS43•••
8501RSD43•••
8501RS44•••
8501RSD44•••
Sold in Lots of
1
10
1
10
1
10
1
10
Catalog Number[3]
8501NR41
8501NR41B
8501NR42
8501NR42B
8501NR43
8501NR43B
8501NR34
8501NR34B
Table 23.48: Accessories (Sold in Lots of 10)
Description
Plastic ID Clip
Metal Hold-Down Clip
For Use With
8501NR41 socket
8501NR42 socket
8501NR43 socket
8501NR34 socket
Sold in Lots of
Supplied with socket
Catalog Number
—
10
8501NH42
Approvals for 8501 RS41, RSD41, RS42, RSD42, RS43, RSD43, RS44, and RSD44
File: E3190
CCN: NLDX,
NLDX7[5]
8501NR43 Socket
+8501RS43P14V20 Relay
8501NR34 Socket
+8501RS44P14V20 Relay
File:
260367
Class:
3211 07
IEC
61810-1
RoHS
Compliant
Approvals for 8501NR Sockets
File: E66924
CCN: SWIV2,
SWIV8
[3]
[4]
[5]
File: E3190
CCN:
NLDX2,
NLDX8
File: 211268
Class: 3211 07
IEC
61810-1
RoHS
Compliant
Please note that the B suffix only desginates quantities of 10 and is not printed on the socket.
The inputs and outputs are on separate sides.
When used with the appropriate 8501NR socket.
23-16
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Type R
General Purpose Relays
Refer to Catalog 8501CT1407
schneider-electric.us
Square D™ Miniature Control Relays
8501R relays are suited for use as logic elements and power switching output devices.
The short stroke motion of the armature provides long mechanical life required for high
speed operation of control systems. Different contact compositions allow these relays to
be used in a variety of applications. Bifurcated crossbar (gold overlay silver) is suitable
for high contact reliability and low level switching requirements. Silver alloy is best suited
for inductive loads. Class I Division II sealed relays can be used in specified hazardous
locations.
4PDT
Complete socket line
•
•
•
Horsepower rated
AC or DC operation
Green pilot light option
RELAYS AND TIMERS
•
•
Table 23.49: Relays: Standard Cover, without LED
Coil Voltage
8501NR45 Socket
+8501RS14V20 Relay
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
120 Vac
240 Vac
Number and Type of Contacts — Thermal current (Ith)
4PDT (4 C/O) — 6 A
4PDT (4 C/O) — 3 A
Catalog Number
Catalog Number
8501RSD14V51
8501RSD24V51
8501RSD14V53
8501RSD24V53
8501RSD14V56
8501RSD24V56
8501RSD14V60
8501RSD24V60
8501RS14V14
8501RS24V14
8501RS14V20
8501RS24V20
8501RS14V24
8501RS24V24
Coil Voltage
8501RS14V14
12 Vdc
24 Vdc
48 Vdc
110 Vdc
24 Vac
120 Vac
240 Vac
23
Table 23.50: Relays: Standard Cover, with LED
Number and Type of Contacts — Thermal current (Ith)
4PDT (4 C/O) — 6 A
4PDT (4 C/O) — 3 A
Catalog Number
Catalog Number
8501RSD14P14V51
8501RSD24P14V51
8501RSD14P14V53
8501RSD24P14V53
8501RSD14P14V56
8501RSD24P14V56
8501RSD14P14V60
8501RSD24P14V60
8501RS14P14V14
8501RS24P14V14
8501RS14P14V20
8501RS24P14V20
8501RS14P14V24
8501RS24P14V24
Table 23.51: Relays: Hermetically Sealed Miniature Control Relays
Coil Voltage
8501RSD24P14V60
6 Vdc
12 Vdc
24 Vdc
48 Vdc
110 Vdc
6 Vac
12 Vac
24 Vac
48 Vac
110 Vac
240 Vac
Number and Type of Contacts — Thermal current (Ith)
4PDT (4 C/O) — 5 A
Catalog Number
8501RSD34V50
8501RSD34V51
8501RSD34V53
8501RSD34V56
8501RSD34V60
8501RS34V35
8501RS34V36
8501RS34V14
8501RS34V17
8501RS34V20
8501RS34V24
8501RSD34V51
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-17
Type R
General Purpose Relays
Refer to Catalog 8501CT1407
schneider-electric.us
Table 23.52: Sockets
Contact Terminal
Arrangement
Connection
Screw Clamp
Terminals
Separate[7]
23
Spring Clamp
Terminals
8501NR45
Sold in Lots of
1
10
10
Catalog Number[6]
8501NR45
8501NR45B
RXZE2S114S
Table 23.53: Accessories (Sold in Lots of)
RELAYS AND TIMERS
Description
Metal hold-down clip
Clip-in ID tags
8501NH45
For Use With
Relays
8501RS(D)14•••
8501RS(D)24•••
8501RS(D)34•••
8501RS(D)14•••
8501RS(D)24•••
8501RS(D)34•••
8501RS(D)14•••
8501RS(D)24•••
8501RS(D)34•••
For Use With
8501NR45 socket
RXZE2S114S socket
Sold in Lots of
10
10
Catalog Number
8501NH45
RSZL300
Approvals for 8501 RS14, RSD14, RS24, and RSD24 Relays
File: E3190
CCN: NLDX,
NLDX7[8]
File: E3190
CCN:
NLDX2,
NLDX8
File:
260367
Class:
3211 07
IEC
61810-1
RoHS
Compliant
File:
E196809
CCN:
NQMJ2,
NQMJ8
File:
211268
Class:
3218 06
IEC
61810-1
RoHS
Compliant
File: 211268
Class: 3211 07
IEC
61810-1
Approvals for 8501 RS34 and RSD34 Relays
File: E123950
CCN: NLDX,
NLDX7[8]
ANSI/ISA
12.12.01
Approvals for 8501NR Sockets
File: E66924
CCN: SWIV2,
SWIV8
[6]
[7]
[8]
RoHS
Compliant
Please note that the B suffix only desginates quantities of 10 and is not printed on the socket.
The inputs and outputs are on separate sides.
When used with the appropriate 8501NR socket.
23-18
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Type C
General Purpose Relays
Class 8501 / Refer to Catalog 8501CT0301
schneider-electric.us
Square D™ Power Relays
8501C relays are ideally suited for controlling single-phase motors, electric heaters,
pumps, conveyors, material handling equipment, and other applications.
•
•
•
•
•
UL Listed
CSA certified
•
•
CE approved
RoHS compliant
Coil Voltage
6 Vdc
12 Vdc
24 Vdc
110 Vdc
6 Vac
12 Vac
24 Vac
120 Vac
208 Vac
240 Vac
277 Vac
480 Vac
SPST: 1 NO /
0 NC
Catalog
Number
8501CDO6V50
8501CDO6V51
8501CDO6V53
8501CDO6V60
8501CO6V35
8501CO6V36
8501CO6V14
8501CO6V20
8501CO6V08
8501CO6V24
8501CO6V04
8501CO6V29
Number and type of contacts - Thermal current (Ith)
DPST: 2 NO /
SPST: 0 NO /
SPDT: 1 NO /
0 NC
1 NC
1 NC
Catalog
Catalog
Catalog
Number
Number
Number
8501CDO7V50
8501CDO8V50
8501CDO15V50
8501CDO7V51
8501CDO8V51
8501CDO15V51
8501CDO7V53
8501CDO8V53
8501CDO15V53
8501CDO7V60
8501CDO8V60
8501CDO15V60
8501CO7V35
8501CO8V35
8501CO15V35
8501CO7V36
8501CO8V36
8501CO15V36
8501CO7V14
8501CO8V14
8501CO15V14
8501CO7V20
8501CO8V20
8501CO15V20
8501CO7V08
8501CO8V08
8501CO15V08
8501CO7V24
8501CO8V24
8501CO15V24
8501CO7V04
8501CO8V04
8501CO15V04
8501CO7V29
8501CO8V29
8501CO15V29
DPDT: 2 NO /
2 NC
Catalog
Number
8501CDO16V50
8501CDO16V51
8501CDO16V53
8501CDO16V60
8501CO16V35
8501CO16V36
8501CO16V14
8501CO16V20
8501CO16V08
8501CO16V24
8501CO16V04
8501CO16V29
Table 23.55: Relays: DC Rated Contacts, 20 A at 110 V (sold in lots of 1)
Number and type of contacts - Thermal current (Ith)
SPST: 1 NO / 0 NC
Catalog Number
8501CDO21V50
8501CDO21V51
8501CDO21V53
8501CDO21V60
8501CO21V35
8501CO21V36
8501CO21V14
8501CO21V20
8501CO21V08
8501CO21V24
8501CO21V04
8501CO21V29
Coil Voltage
6 Vdc
12 Vdc
24 Vdc
110 Vdc
6 Vac
12 Vac
24 Vac
120 Vac
208 Vac
240 Vac
277 Vac
480 Vac
Table 23.56: Relays: DC Rated Contacts, 10 A at 110 V (sold in lots of 1)
Number and type of contacts - Thermal current (Ith)
DPDT: 1 NO / 0 NC
Catalog Number
8501CDO22V50
8501CDO22V51
8501CDO22V53
8501CDO22V60
8501CO22V35
8501CO22V36
8501CO22V14
8501CO22V20
8501CO21V08
8501CO22V24
8501CO22V04
8501CO22V29
Coil Voltage
6 Vdc
12 Vdc
24 Vdc
110 Vdc
6 Vac
12 Vac
24 Vac
120 Vac
208 Vac
240 Vac
277 Vac
480 Vac
Approvals for Square D Power Relays
File: E78351
CCN: NLDX,
NLDX7
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
File: 218139
Class: 3211 04
IEC 60947-4-1
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RELAYS AND TIMERS
Table 23.54: Relays: AC Rated Contacts, 40 A at 277 V (sold in lots of 1)
23
8501CDO6V51
40 A contact rating
Motor load (hp) ratings
Durable open-frame
construction
23-19
Industrial Relays
CAD
Refer to Catalog 8501CT0101
schneider-electric.us
TeSys™ D IEC Style Instantaneous Control Relays
23
These 600 V relays are approved for use around the world. TeSys D relays are usually
mounted on 35 mm DIN track, but can also be mounted directly to a panel. The contacts
have NEMA A600 and Q600 ratings, in addition to the standard IEC ratings, making
them suitable for use in most any control circuit. Low consumption versions are available
for use with low level DC control signals from a computer or a PLC. Adder decks can be
added to a basic five pole relay to make it up to an 11 pole relay. The serrated silvernickel contacts with wiping action provide excellent reliability in 12 or 24 V control
circuits. Special auxiliary contacts are available for switching low power down to 5 V at
10 mA. Timer and mechanical latch attachments are available.
Table 23.57: Instantaneous Control Relays
RELAYS AND TIMERS
Contact Composition
Normally Open
Normally Closed
CAD32
Table 23.58: Coil Voltage Codes:
12–240 Vac, 12–72 Vdc, 5–72 Vdc Low
Consumption [2]
AC 50/60 Hz Coil (for additional voltage code options see page 7
of Catalog 8501CT0101).
Volts
12
24
48
120
208
240
Code
J7
B7
E7
G7
LE7
U7
DC Coil (coils have built in suppression as standard)
Volts
12
24
36
48
60
72
Code
JD
BD
CD
ED
ND
SD
DC Low Consumption Coil (coils have built in suppression as
standard)
Volts
5
12
24
48
72
Code
AL
JL
BL
EL
SL
Terminal Type
Number of Contacts
Screw Clamp
5
Spring Terminal
5
Ring Tongue
5
5
3
5
3
5
3
0
2
0
2
0
2
Catalog
Number[1]
CAD50
CAD32
CAD503
CAD323
CAD506
CAD326
Table 23.60: Instantaneous Auxiliary Contact Blocks (for use in normal operation
environments)
Maximum Number per
Device
Clip-on Mounting
Number of
Contacts
Contact Composition
Termination
Type
Left Side
Only
Front
Screw Clamp
1
—
—
1
Not for
DC devices
Spring
Terminal
2
Table 23.59: Coil Voltage Codes (cont.):
277–600 Vac, 110–440 Vdc[2]
AC 50/60 Hz Coil (for additional voltage code options see page 7
of Catalog 8501CT0101).
Volts
277
480
600
Code
W7
T7
X7
DC Coil (coils have built in suppression as standard)
Volts
110
125
220
250
440
Code
FD
GD
MD
UD
RD
Screw Clamp
Screw Clamp
  4 [3]
1
—
Spring
Terminal
  4 [3]
1
Screw Clamp
Spring
Terminal
—
Normally Open
Normally Closed
Catalog
Number
2
1
0
2
1
0
2
1
0
4
3
2
1
0
4
3
2
1
0
  2 [4]
0
1
2
0
1
2
0
1
2
0
1
2
3
4
0
1
2
3
4
  2 [4]
LADN20
LADN11
LADN02
LADN203
LADN113
LADN023
LAD8N20
LAD8N11
LAD8N02
LADN40
LADN31
LADN22
LADN13
LADN04
LADN403
LADN313
LADN223
LADN133
LADN043
LADC22
  2 [4]
  2 [4]
LADC223
Table 23.61: Instantaneous Auxiliary Contacts with Dust and Damp Protected
Contacts (for use in harsh industrial environments)
Contact Composition
Number
of
Contacts
Maximum
Number
per Device
Front Mounting
2
1
  4 [3]
1
Catalog
Number
2
—
2
2
2
Sealed
—
2
—
—
—
[5]
—
—
2
—
—
—
—
—
2
1
Normal
—
—
—
—
1
LA1DX20
LA1DX02
LA1DY20
LA1DZ40
LA1DZ31
Approvals for TeSys D IEC Style Instantaneous Control Relays
File: E164353
CCN: NKCR
•
[1]
[2]
[3]
[4]
[5]
File: LR43364
Class: 3211 03
For replacement AC coils, see TeSys™ D and F Overload
Relay Accessories, page 18-22. DC coils are not
replaceable.
Add the proper voltage code from Table 23.58 or Table 23.59 to the end of the catalog number. For example, CAD50B7.
Add the proper voltage code to the end of catalog number.
Auxiliary contact blocks with four contacts cannot be used on relays with low consumption coils.
Includes 1 N.O. and 1 N.C. overlapping contact.
Grounding terminal points (2 terminals jumpered together; see diagram on page 8 of Catalog 8501CT0101).
23-20
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Industrial Relays
CAD
Refer to Catalog 8501CT0101
schneider-electric.us
TeSys™ D IEC Style Contact Blocks and Accessories
Number and
Type
of Contacts
Maximum
Number
per Device
Front Mounting
Time Delay
Type
Termination
Type
Screw Clamp
On-Delay
LADT
1 N.C. and 1 N.O.
Spring Terminal
1
Screw Clamp
Off-Delay
Spring Terminal
NOTE: For Lockout Cover, see page 7 of catalog 8501CT0101.
Range
Catalog
Number
0.1–3 s [6]
0.1–30 s
10–180 s
1–30 s [7]
0.1–3 s [6]
0.1–30 s
10–180 s
1–30 s [7]
0.1–3 s [6]
0.1–30 s
10–180 s
0.1–3 s [6]
0.1–30 s
10–180 s
LADT0
LADT2
LADT4
LADS2
LADT03
LADT23
LADT43
LADS23
LADR0
LADR2
LADR4
LADR03
LADR23
LADR43
Table 23.63: Mechanical Latch Blocks [8]
Maximum Number per Device
Front Mounting
1
Unlatching Control
Manual or electrical
Catalog
Number[9]
LAD6K10
23
LA6DK
Table 23.64: Coil Suppressor Modules
These modules clip onto the right hand side of the control relay and the electrical connection is instantly made.
Adding an input module is still possible.
RC Circuits (Resistor-Capacitor)
•
•
•
LAD4
Effective protection for circuits highly sensitive to “high frequency” interference.
Voltage limited to 3 Uc maximum and oscillating frequency limited to 400 Hz maximum.
Slight increase in drop-out time (1.2 to 2 times the normal time).
For Mounting On:
CAD (Vac)
Varistors (Peak Limiting)
•
•
•
Operational Voltage
Catalog Number
LAD4RCE
LAD4RCU
24 to 48 Vac
110 to 240 Vac
Protection provided by limiting the transient voltage value to 2 Uc maximum.
Maximum reduction of transient voltage peaks.
Slight increase in drop-out time (1.1 to 1.5 times the normal time).
24 to 48 Vac
50 to 127 Vac
110 to 250 Vac
Bidirectional Peak Limiting Diode
LAD4VE
LAD4VG
LAD4VU
CAD (Vac)
•
•
Protection provided by limiting the transient voltage value to 2 Uc maximum.
Maximum reduction of transient voltage peaks.
CAD (Vac)
24 Vac
72 Vac
LAD4TB
LAD4TS
Table 23.65: Coil Voltage Codes
Dimensions (in./mm)
Volts (Vac/Vdc)
Code
CAD (Vac Coil)
24
B
32/36
C
42/48
E
60/72
EN
100
K
110/127
F
220/240
M
b
Table 23.66: Dimensions (See Figures at Left)
CAD (Vac Coil)
c
0.49
12.5
(LAD-8)
c1
c2
1.77
45
c3
b
c1
Without cover or add-on
blocks
With cover, without add-on
blocks
with LADN or C (2 or 4
contacts)
c2
with LA6DK10
c
b
CAD (Vdc Coil or Low Consumption Vdc Coil)
c
c1
c2
1.77
45
c3
with LADT, R, S
with LADT, R, S and
sealing cover
in. (mm)
32
323
50
503
3.03
3.90
(77)
(99)
3.31
3.31
(84)
(84)
3.39
3.39
(86)
(86)
4.61
4.61
(117)
(117)
5.08
5.08
(129)
(129)
5.39
5.39
(137)
(137)
5.55
5.55
(141)
(141)
CAD (Vdc Coil or Low
Consumption Vdc Coil)
b
c1
Without cover or add-on
blocks
With cover, without add-on
blocks
with LADN or C (2 or 4
contacts)
c2
with LA6DK10
c3
with LADT, R, S
c
with LADT, R, S and sealing
cover
in. (mm)
32
323
50
503
3.03
3.90
(77)
(99)
3.66
3.66
(93)
(93)
3.74
3.74
(95)
(95)
4.96
4.96
(126)
(126)
5.43
5.43
(138)
(138)
5.75
5.75
(146)
(146)
5.91
5.91
(150)
(150)
c3
[6]
[7]
[8]
[9]
With extended scale from 0.1 to 0.6 s.
With switching time of 40 ms ± 15 ms between opening of the N.C. contact and closing of the N.O. contact.
Power should not be simultaneously applied or maintained to the mechanical latching block and the CAD relay. The duration of the control signal to the mechanical latching block and the
CAD relay should be greater than or equal to 100 ms.
Complete the catalog number by adding the coil voltage code from Table 23.65. For example, LADK10B.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
RELAYS AND TIMERS
Table 23.62: Time Delay Auxiliary Contact Blocks
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-21
Industrial Relays
CAD
Refer to Catalog 8501CT0101
schneider-electric.us
TeSys™ D IEC Style Accessories
Table 23.67: Cabling Accessory
Catalog
Number
LAD4BB
LAD4BBVE
LAD4BBVG
LAD4BBVU
Description
Without coil suppression
Mounting Adapter
For adapting existing wiring
to a new product
23
24 to 48 Vac
50 to 127 Vac
110 to 250 Vac
With coil suppression
Table 23.68: Electronic Serial Timer Modules [10]
On-Delay Type
Mounted using adaptor LAD4BB, to be ordered separately, see listing above.
RELAYS AND TIMERS
Operational Voltage
Time Delay
24 to 250 Vac
0.1 to 2 s
1.5 to 30 s
25 to 500 s
Catalog
Number
LA4DT0U
LA4DT2U
LA4DT4U
Table 23.69: Auto-Man-Stop Control Modules
For local override operation tests with two-position “Auto-Man” switch and “O-I” switch
Mounted using adaptor LAD4BB, to be ordered separately, see listing above.
Catalog
Number
LA4DMK
Operational Voltage
24 to 100 Vac
Table 23.70: Accessories (ordered separately)
Description
For Mounting On:
For Marking
Sheet of 64 self-adhesive blank labels 8 x 33
Sheet of 112 self-adhesive blank labels 8 x 12
For Protection
Lockout cover
Relay cover preventing access to the moving
contact carrier
CAD, LAD (4 contacts),
LA6DK
LAD (2 contacts), LADT
Must be Ordered
in Multiples of:
Catalog
Number
10
LAD21
10
LAD22
LADT, LADR
1
LA9D901
CAD
1
LAD9ET1
Table 23.71: Application Data
Type
Rated Insulation
Voltage (Ui)
Rated Impulse
Withstand Voltage
(Uimp)
Separation of Electrical
Circuits
Conforming to IEC 60947-1-1
Overvoltage category III and
degree of pollution 3
Conforming to UL, CSA
Conforming to IEC 60947-1-1
To IEC 536 and VDE 0106
Conforming to Standards
Approvals
[10]
Protective Treatment
Conforming to IEC 60068
Degree of Protection
Conforming to VDE 0106
CAD (Vac)
CAD (Vdc)
CAD (Vdc)
Low
Consumption
690 V
690 V
690 V
600 V
600 V
600 V
6 kV
6 kV
6 kV
Reinforced insulation up to 400 V
IEC 60947-1-1, N-F C 63-140, VDE 0660, BS 4794.
EN 60947-5-15
UL: File:
E164353
CCN: NKCR
CSA: File:
Class: 3211 03
LR43364 CE
“TH” (Tropical Finish). See page 23 of Catalog
8501CT0101 for details.
Protection
Front face protected against
against direct
direct finger contact IP 2X
finger contact
For 24 V operation, the relay must be fitted with a 21 V coil (code Z7).
23-22
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Industrial Relays
CA2K and CA3K
Refer to Catalog 8501CT0101
schneider-electric.us
TeSys™ K IEC Style Control Relays
•
•
Mounting on 35 mm DIN 3 track or 4
screw direct mounting.
Screws in open “ready-to-tighten”
position
•
•
NEMA A600, Q600
IEC AC15, DC13
Table 23.72: Control Relays
Supply
Consumption
Screw clamp
AC
4.5 VA
Spring
Termination
Faston
1 x 6.35
or 2 x 2.8
Solder pins for
printed circuit
board
CA2KN403
Screw clamp
DC
3W
Catalog Number
[11]
Type of
Termination
Spring
Termination
Faston
1 x 6.35
or 2 x 2.8
Solder pins for
printed circuit
board
N.O.
4
3
2
4
3
2
4
3
2
4
3
2
4
3
2
4
3
2
4
3
2
4
3
2
N.C.
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
0
1
2
CA2KN40 • •
CA2KN31 • •
CA2KN22 • •
CA2KN403 • •
CA2KN313 • •
CA2KN223 • •
CA2KN407 • •
CA2KN317 • •
CA2KN227 • •
CA2KN405 • •
CA2KN315 • •
CA2KN225 • •
CA3KN40 • •
CA3KN31 • •
CA3KN22 • •
CA3KN403 • •
CA3KN313 • •
CA3KN223 • •
CA3KN407 • •
CA3KN317 • •
CA3KN227 • •
CA3KN405 • •
CA3KN315 • •
CA3KN225 • •
Table 23.73: Low Consumption Control Relays
Compatible with programmable controller outputs.
on 35 mm DIN 3 track or 4
• Mounting
• LED indicator incorporated.
screw direct mounting.
range coil (70 to 130% Uc),
in open “ready-to-tighten”
• Wide
• Screws
suppressor fitted as standard.
position.
Contact Configuration
Control Circuit
CA4KN405
Supply
Consumption
Screw clamp
DC
CA3KN407
[11]
[12]
1.8 W
Catalog
Number [12]
Type of
Termination
Spring
Termination
Faston
1 x 6.35
or 2 x 2.8
Solder pins for
printed circuit
board
N.O.
4
3
2
4
3
2
4
3
2
4
3
2
N.C.
0
1
2
0
1
2
0
1
2
0
1
2
CA4KN40 • • •
CA4KN31 • • •
CA4KN22 • • •
CA4KN403 • • •
CA4KN313 • • •
CA4KN223 • • •
CA4KN407 • • •
CA4KN317 • • •
CA4KN227 • • •
CA4KN405 • • •
CA4KN315 • • •
CA4KN225 • • •
Complete the catalog number by adding the proper voltage code from Table 23.74, Table 23.75, Table 23.76, or Table 23.77. For example, CA2KN40G7.
Complete the catalog number by adding the proper voltage code from Table 23.78. For example, CA4KN40BW3.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-23
23
Control Circuit
CA2KN22
RELAYS AND TIMERS
Contact Configuration
Industrial Relays
CA2K and CA3K
Refer to Catalog 8501CT0101
schneider-electric.us
Table 23.74: Coil Voltage Codes for CA2K Control Relays (0.8–1.15 Uc) (0.85–1.10
Uc)—12 to 220/230 Vac 50/60 Hz
Voltage
12 Vac
24 Vac
36 Vac
42 Vac
48 Vac
110 Vac
120 Vac
127 Vac
208 Vac
Code
J7
B7
C7
D7
E7
F7
G7
FC7
L7
NOTE: Up to and including 240 V, coil with integral suppression device available:
add 2 to the code required. Example: J72.
220/230
Vac
M7
23
Table 23.75: Coil Voltage Codes for CA2K Control Relays (0.8–1.15 Uc) (0.85–1.10
Uc)—230 to 660/690 Vac 50/60 Hz
Voltage
230 Vac
Code
P7
230/240
Vac
U7
380/400
Vac
Q7
400 Vac
V7
400/415
Vac
N7
440 Vac
480 Vac
500 Vac
R7
T7
S7
RELAYS AND TIMERS
NOTE: Up to and including 240 V, coil with integral suppression device available:
add 2 to the code required. Example: J72.
Table 23.76: Coil Voltage Codes for CA3K Control Relays (0.8–1.15 Uc)—
12 to 72 Vdc
Voltage
Code
12 Vdc
JD
20 Vdc
ZD
24 Vdc
BD
36 Vdc
CD
48 Vdc
ED
60 Vdc
ND
660/690
Vac
Y7
72 Vdc
SD
NOTE: Coil with integral suppression device available: add 3 to the code required.
Example: JD3.
Table 23.77: Coil Voltage Codes for CA3K Control Relays (0.8–1.15 Uc)—
100 to 250 Vdc
Voltage
Code
100 Vdc
KD
110 Vdc
FD
125 Vdc
GD
200 Vdc
LD
220 Vdc
MD
230 Vdc
MPD
240 Vdc
MUD
250 Vdc
UD
NOTE: Coil with integral suppression device available: add 3 to the code required.
Example: JD3.
Table 23.78: Coil Voltage Codes for CA4K, Low Consumption Control Relays
(Wide Range Coil: 0.7–1.3 Uc)
Voltage
Code
12 Vdc
JW3
24 Vdc
BW3
48 Vdc
EW3
72 Vdc
SW3
Approvals for TeSys K IEC Style Control Relays
File: E164353
CCN: NKCR
23-24
File: LR43364
Class: 3211 03
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected]ng.com - www.stevenengineering.com
Industrial Relays
CA2K and CA3K
Refer to Catalog 8501CT0101
schneider-electric.us
TeSys™ K IEC Style Contact Blocks and Accessories
Table 23.79: Instantaneous Auxiliary Contact Blocks [13][14]
Clip-on Front Mounting, 1 Block Per Control Relay
Contact Configuration
Type of Connection
Screw Clamp
Spring Termination
LA1KN403
27
1.06
Approximate Dimensions for
LA2KT Electronic Time Delay Contact Blocks (in./mm)
Faston
1 x 6.35
or 2 x 2.8
1.45
1.34
34
38
LA2KT
N.C.
0
2
1
0
1
2
3
4
0
1
2
0
1
2
3
4
0
2
1
0
1
2
3
4
LA1KN20
LA1KN02
LA1KN11
LA1KN40[15]
LA1KN31[15]
LA1KN22[15]
LA1KN13[15]
LA1KN04[15]
LA1KN203
LA1KN113
LA1KN023
LA1KN403[15]
LA1KN313[15]
LA1KN223[15]
LA1KN133[15]
LA1KN043[15]
LA1KN207
LA1KN027
LA1KN117
LA1KN407[15]
LA1KN317[15]
LA1KN227[15]
LA1KN137[15]
LA1KN047[15]
RELAYS AND TIMERS
N.O.
2
0
1
4
3
2
1
0
2
1
0
4
3
2
1
0
2
0
1
4
3
2
1
0
LA1KN40
23
LA1KN20
Catalog Number
Table 23.80: Clip-On Front Mounting, 1 Block per Control Relay
Voltage
58
2.28
1.34
57
=
=
240 Vac/Vdc, 2 A maximum
0.85–1.1 Uc
250 VA or 150 W
–10 to + 60oC (+14o F to 140o F)
1.5 s during the time delay period,
0.5 s after the time delay.
Table 23.82: Accessories (supplied separately)
1.97
50
2.28
58
=
1.97
50
2.05
53
2.28
58
[13]
[14]
[15]
[16]
[17]
[18]
[19]
1.77
45
LA2KT2E
LA2KT2U
NOTE: For other electronic timers, see Type JCK60 and JCK70 Timers, page 23-43.
On Printed Circuit Board
A1
= = =
0.34
8.65
10xØ1.3
Catalog No.
1
1
Reset time
4xØ4
LA1-K
2.24
57
Composition C.O.
1 to 30 s
1 to 30 s
Relay output, with common point changeover contact
Control voltage
Maximum switching capacity
Operating temperature
Approximate Dimensions
for CA2, CA3, CA4K Control Relays (in./mm)
On Panel
1.22
31
Timing Range (s)
Table 23.81: Electronic Time Delay Contact Blocks
2.24
34
Type
On-delay
On-delay
AC or DC: 24 to 48
AC: 110 to 240
A2
1.38
35
1.77
45
=
Description
Marker
holder[16]
Clips on front of relay
Clip-on
markers[16]
4 maximum
per
device
Suppressor
modules with
incorporated
LED indicator
Clips onto
front
of relay with
locating
device.
No tools
required for
connection.
100
Strip of 10 identical numbers, 0 to 9
Strip of 10 identical capital letters A to Z
Strip of 10 identical capital letters A to Z
For 12 to 24 Vac and Vdc (varistor)
For 32 to 48 Vac and Vdc (varistor)
For 50 to 129 Vac and Vdc (varistor)
For 130 to 250 Vac and Vdc (varistor)
For 12 to 24 Vdc (diode + Zener diode)
For 32 to 48 Vdc (diode + Zener diode)
For 220 to 250 Vac (RC)
Table 23.83: Environment
Conforming to Standards
Approvals
Conforming to IEC 68 (DIN 50016)
Protective treatment
Degree of protection
Conforming to VDE 0106
Storage
Ambient air
temperature
Operation
Max. operating altitude Without derating
Catalog No.
Sold in lots of
25
5
LA9D90
AB1R•[16]
AB1G•[16]
LA4KE1B[17]
LA4KE1E[17]
LA4KE1FC[17]
LA4KE1UG[17]
LA4KC1B[18]
LA4KC1E[18]
LA4KA1U[19]
IEC 947, NF C 63-140, VDE 0660, BS 5424, CE
UL, CSA, DEMKO, NEMKO, SEMKO, FI
“TC” (Climateproof)
Protection against direct finger contact
-58 to 176 oF (-50 to 80oC)
-13 to 122 oF (-25 to 50oC)
6562 ft (2000 m)
Clip-on front mounting, 1 block per control relay.
Auxiliary contact module not suitable for safety circuits.
Not to be used on CA4KN relays.
See “Clip-in Marker Strips” in Catalog 8501CT0101 for information on completing the catalog number.
Protection by the limitation of the transient voltage to 2 Uc maximum. Maximum reduction of the transient voltage peaks. Slight time delay on drop-out (1.1 to 1.5 times normal).
No overvoltage or oscillation frequency. Polarized component. Slight time delay on drop-out (1.1 to 1.5 times normal).
Protection by limitation of the transient voltage to 3 Uc max. and limitation of the oscillation frequency. Slight time delay on drop-out (1.2 times to twice normal).
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-25
Industrial Relays
CA2SK, CA3SK, and CA2SKE
Refer to Catalog 8501CT0101
schneider-electric.us
TeSys™ SK IEC Style Control Relays
•
•
•
Miniature size saves space.
Mounts on 35 mm DIN 3 track.
Up to 4 poles.
Table 23.84: IEC Style Industrial Control Relays
23
Control Circuit Supply
Consumption
AC
4.2 VA
DC
2.2 W
Type of Termination
Screw clamp
Contact Configuration
N.O.
N.C.
1
1
2
0
1
1
2
0
Catalog Number
[20]
CA2SK11
CA2SK20
CA3SK11
CA3SK20
•
•
•
•
•
•
•
•
Table 23.85: Contact Adder Decks (for CA2SK20 only)
RELAYS AND TIMERS
CA2SK11G7
Contact Configuration
N.O.
N.C.
2
0
1
1
0
2
Type of Termination
Screw clamp
LA1SK11
Catalog Number
LA1SK20
LA1SK11
LA1SK02
Transient Suppressor Module dampens the voltage spike that may occur when the
relay coil is de-energized. The spike may adversely affect solid state equipment near the
relay. The transient suppressor module snaps into a cavity located in the side of the
relay. These modules can be used with CA2SK and CA3SK relays.
Table 23.86: Transient Suppressor Module
Control Circuit Voltage
24–48 Vac 50/60 Hz, 24–48 Vdc
110–250 Vac 50/60 Hz, 110–250 Vdc
Catalog Number
LA4SKEIE
LA4SKEIU
Table 23.87: Coil Voltage Codes for Control Relays
Voltage
12
50/60 Hz
—
DC
JD
24
B7
[21]
BD
36
48
E7
[21]
ED
—
CD
72
110
—
F7
SD
—
120
G7
[21]
—
220
M7
[21]
—
230
P7
—
240
U7
[21]
—
277
380
400
UE7
Q7
V7
—
—
—
480
T7
[21]
—
IEC Style Alternating Relays are used to alternate the use of 2 motor circuits. When the
coil is energized the first time, one contact closes and will open when the coil is deenergized. When the coil is energized again, the other contact will close and will open
when the coil is de-energized. The contacts from these alternators are to be used in the
control circuit of the starters that are controlling pump or compressor motors.
Table 23.88: Alternating Relays
Coil Voltage
(Voltage-Hz)
Type
CA2SKE20• •[22]
24–50/60
CA2SKE20
Table 23.89: Contact Ratings for CA2SK, CA3SK, and CA2SKE20 Relays
V
120
240
480
600
NEMA
Rating
A600
AC
Inductive 35% PF
Make
Break
A
VA
A
VA
60
6
30
3
7200
720
15
1.5
12
1.2
Continuous
Amperes
Resistive 75% PF
Make, Break and
Continuos Amperes
10
10
DC
V
Continuous
Amperes
24
60
110
240
3
2
0.8
0.2
Approximate Dimensions for CA2SKE Relay
1.06
2.19
27
56
.20
#8
or
4mm
.16
(4)
5
1.93
(49)
56
2.20
2.28
(58)
.14
Dual Dimensions: INCHES
Millimeters
1.77
(45)
2.68
(68)
1.36
(34.5)
4
Approvals for TeSys SK IEC Style Relays
File: E164353
CCN: NKCR
[20]
[21]
[22]
File: LR43364
Class: 3211 03
Use the appropriate voltage code from Table 23.87 to complete the catalog number. For example, CA2SK11G7.
Alternating relays CA2SKE available in these voltages only. No other voltages are available.
Use the appropriate voltage code from Table 23.87 to complete the catalog number (for example, CAZSK11G7). Only available with voltages indicated in this table.
23-26
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Type X
Industrial Relays
Class 8501 / Refer to Catalog 8501CT9601
schneider-electric.us
Square D™ NEMA Style AC Relays
Class 8501 Type X relays combine a rugged, heavy-duty design with modular
construction for greater flexibility. They are ideal for applications where long life, high
reliability, and ease of maintenance are important. The Type X family offers a complete
line of relays and accessories for most control applications. The 8501X relay consists of
a standard 4 pole base to which it is possible to add additional contacts, timer, and latch
functionality. Instantaneous and Master contacts are converted from N.O. to N.C. by
flipping the contact cartridge within the base. The 8501X relay can either be built from
individual part numbers or ordered pre-assembled.
8501XO40V02 AC Control Relay
•
•
•
Straight-through wiring
Plug-in contact cartridges for easy
contact conversion and replacement
Contact conversion without removing
terminal screws or wires
•
•
RELAYS AND TIMERS
AC Control Relays
Self-lifting pressure wire connectors
Replaceable coil
Table 23.90: AC Control Relays (lots of 1)
8501XMO40V02 AC Master Relay
AC Control and Master Relays Dimensions
A
.19
5
2.23
1.12 57
28
3.50
89
3.12
79
B30080-064
Type[1][2]
XO00
XO20
XO30
XO40
XO60
XO80
XO1000
XO1200
23
No. of N.O. 10 A Convertible Instantaneous Contacts[1]
0
2
3
4
6
8
10
12
AC Master Relays
• 20 ampere contact rating due to use of master contact cartridges.[3]
• Provisions for standard cartridges to be used in contact cavities not occupied by
master cartridges in 2-8 pole AC relay.
Table 23.91: AC Master Relays
Type[2][4]
XMO20
XMO40
XMO60
No. of N.O. 20 A Convertible Contacts
2
4
6
Table 23.92: Dimension A (See Figure at Left) and Weights
No. of Poles
Prov. for
(2) #8/#10 Mtg. Screws
in.
3.95
5.16
6.36
0–4
6–8
10–12
Dual Dimensions: INCHES
Millimeters
Dim. A
mm
100
131
162
Shipping Weight, lb
2.0
2.3
2.7
AC Timing Relays
•
•
•
Easily convertible On or Off
Delay
Two adjustable timing ranges
Repeat accuracy well above
±10%
•
Convertible 1 N.O. and 1 N.C. timed contacts
•
•
Large knob for easy adjustment of time delay
Off Delay mode times out even after loss of power
Table 23.93: AC Timing Relays (lots of 1)
Timing Mode
8501XO40XTE1V02 AC Timing Relay
On Delay
Off Delay
[1]
[2]
[3]
[4]
No. of N.O. 10 A
Convertible
Instantaneous Contacts
0
2
4
0
2
4
Timed
Convertible
Contacts
N.O.
N.C.
1
1
1
1
1
1
1
1
1
1
1
1
Timing Relay
0.2–60 s
5–180 s
Type [2]
XO00XTE1
XO20XTE1
XO40XTE1
XO00XTD1
XO20XTD1
XO40XTD1
Type [2]
XO00XTE2
XO20XTE2
XO40XTE2
XO00XTD2
XO20XTD2
XO40XTD2
A maximum of 8 N.C. contacts is allowed on 9–12 pole relays.
Voltage code must be specified to order these products. Refer to Table 23.97 and insert the code as shown in Table 23.98.
Maximum of six 8501 Type XC4 master cartridges may be used on only 7 and 8 pole AC devices.
Attachments not permitted on this relay.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-27
Industrial Relays
Type X
Class 8501 / Refer to Catalog 8501CT9601
schneider-electric.us
AC Latching Relays
•
•
•
Mechanical latch holds all contacts switched even after removal of power from
replaceable latching coil.
Provides sequence memory in the event of power loss. Ideal for press control, process
control, and punch presses.
Replaceable unlatch coil to switch contacts back to original state.
23
Table 23.94: AC Latching Relays (lots of 1)
Latching Relay
Type [5]
XO20XL
XO30XL
XO40XL
XO60XL
XO80XL
N.O. 10 A Convertible Instantaneous Contacts
8501XO40XLV02 Latching Relay
RELAYS AND TIMERS
2
3
4
6
8
Table 23.95: Dimension A (See Figure at Left) and Weights
AC Latching Relays Dimensions
A
.19
5
1.12
28
3.12
79
3.50
89
B30080-160
Dual Dimensions:
No. of Poles
2.23
57
•
in.
6.54
7.74
2–4
6–8
Dim. A
Shipping Weight, lb
mm
166
197
2.8
3.1
For replacement coils, see Table 23.112.
Table 23.96: AC Contact Ratings
Type of
Cartridge
Prov. for
(2) #8/#10 Mtg. Screws
INCHES
Millimeters
•
V
Inductive
35% Power Factor
NEMA
Rating
Standard
or
Overlapping
120
240
480
600
A600
Master[6]
—
A600
Logic Reed
—
—
Make
A
Break
VA
A
VA
Continuous
Amperes
Resistive
75% Power
Factor
Make, Break and
Continuous
Amperes
60
6
30
3
7200
720
10
10
15
1.5
12
1.2
Same as standard cartridge above except substitute 20 A for the
continuous ampere rating
150 Vac, 150 mA, 8 W Maximum
For DC ratings, see Table 23.102.
Table 23.97: Voltage Codes
12–60
24–60
24–50
48–60
48–50
120–60/110–50
208–60
240–60/220–50
277–60
480–60/440–50
600–60/550–50
AC Voltages - Hz
Code
V11
V01
V12
V18
V16
V02
V08
V03
V04
V06
V07
Table 23.98: How to Order
•
•
•
To Order Specify:
Class Number
Type Number
Voltage Code
Class
Catalog Number
Type
Voltage Code
8501
XO40
V02
Approvals for Square D NEMA Style Relays
File: E78403
CCN: NKCR
[5]
[6]
File: 060905
Class: 3211 03
IEC 60947–1
Voltage code must be specified to order these products. Refer to Table 23.97 and insert the code as shown in Table 23.98.
Maximum of six 8501 Type XC4 master cartridges may be used on only 7 and 8 pole AC devices.
23-28
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Type X
Industrial Relays
Class 8501 / Refer to Catalog 8501CT9601
schneider-electric.us
Square D™ NEMA Style DC Relays
DC Control Relays
•
•
•
•
Replaceable, highly reliable pure DC power plant: no economizing resistors,
overlapping contacts or dual-wound coil.
Uses the same Type XB adder decks and attachments as the AC version.
Offers all the features of the AC relay.
Available in up to 8 poles.
All contact poles are usable since no overlapping contacts are needed.
RELAYS AND TIMERS
•
Table 23.99: DC Control Relays
0
2
4
6
8
DC Control Relays Dimensions (in./mm)
A
.25
6
Control Relay
Type[7]
XDO00
XDO20
XDO40
XDO60
XDO80
Normally Open 5 A Convertible
Instantaneous Contacts
8501XDO40V53 Control Relay
2.23
1.12 57
28
Table 23.100: Dimension A (See Figure at Left) and Weights
B30080-066
No. of Poles
in.
5.17
6.37
7.60
0–4
6–8
10–12
Prov. for
(2) #8/#10 Mtg. Screws
Dim. A
Shipping Weight
lb.
3.1
3.4
3.8
mm
131
162
193
23
3.56
90 3.12
79
DC Timing Relays
• Easily convertible On Delay or Off Delay.
• Two adjustable timing ranges.
• Repeat accuracy well above ±10%.
• Convertible 1 N.O. and 1 N.C. timed contacts.
• Large knob for easy adjustment of time delay.
• Off Delay mode times out even after loss of power.
Table 23.101: DC Timing Relays
8501XDO40XTE2V53 Timing Relay
DC Timing Relays Dimensions (in./mm)
7.77
197
.25
6
2.23
1.12 57
28
3.56
903.12
79
Timing
Mode
Timed
Convertible
Contacts
N.O.
N.C.
1
1
1
1
1
1
1
1
1
1
1
1
Normally
Open 5 A Convertible
Instantaneous Contacts
0
2
4
0
2
4
On Delay
Off Delay
Timing Relay[7]
0.2–60 s
5–180 s
Type
XDO00XTE1
XDO20XTE1
XDO40XTE1
XDO00XTD1
XDO20XTD1
XDO40XTD1
Type
XDO00XTE2
XDO20XTE2
XDO40XTE2
XDO00XTD2
XDO20XTD2
XDO40XTD2
Table 23.102: DC Contact Ratings
DC Ratings
B30080-075 A
Type of
Cartridge
Prov. for
(2) #8/#10 Mtg. Screws
Standard
Overlapping
Logic Reed
•
Volts
125
250
125
—
NEMA
Rating
P600
P150
—
Inductive
Make and Break
Amperes
138 VA Max.
1.1
0.55
1.1
30 Vdc, 60 mA
Continuous
Amperes
5
5
5
—
Resistive
Make and
Continuous
Break
Amperes
Amperes
4
5
0.8
5
4
5
—
—
For AC ratings, see Table 23.96.
NOTE: Do not use any 8501 Type XC4 Master Cartridges on any DC-operated
device.
[7]
Voltage code must be specified to order these products. Refer to Table 23.106 and insert the appropriate code as shown in Table 23.107.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-29
Industrial Relays
Type X
Class 8501 / Refer to Catalog 8501CT9601
schneider-electric.us
DC Latching Relays
23
•
•
•
•
Mechanical latch holds all contacts switched even after removal of power from
replaceable latching coil.
Provides sequence memory in the event of power loss.
Ideal for sequencing applications such as press control, process control and punch
presses.
Replaceable unlatch coil to switch contacts back to original state.
Table 23.103: DC Latching Relays
2
4
6
8
RELAYS AND TIMERS
DC Latching Relays Dimensions (in./mm)
A
.25
6
3.56
90
B30080-159
Latching Relay [8]
Type
XDO20XDL
XDO40XDL
XDO60XDL
XDO80XDL
Normally Open 5 A Convertible
Instantaneous Contacts
8501XDO40XDLV53 Latching Relay
2.23
57
1.12
28
3.12
79
Prov. for
(2) #8/#10 Mtg. Screws
NOTE: Unlatch coil is rated for intermittent duty and should be connected through a
N.O. contact of the relay if the input signal is maintained. Order one more N.O.
contact than the application requires to use as a coil clearing contact.
Table 23.104: Dimension A (See Figure at Left) and Weights
No. of
Poles
2–4
6–8
in.
7.76
8.98
Dim. A
Shipping
Weight, lb.
3.9
4.2
mm
197
228
DC Utility Relays
8501XUDO40V53 Utility Relay
Ideal for utility plant applications where reliable performance and a pure DC power plant
is required. In addition to the Type XDO relay features, the Type XUDO provides:
• Up to 12 poles N.O. or N.C.
• Nominal 125 Vdc coil, capable of handling 140 Vdc continuously and picking up at 105
Vdc after having been operated at 140 Vdc continuously. Other voltages with
comparable operating characteristics are available.
• Enclosed device capable of operating in 145°F ambient.
Table 23.105: DC Utility Relays
Open Type[8]
Type
XUDO40
XUDO04
XUDO80
XUDO08
XUDO1200
XUDO0012
Number of 5 A Convertible Contacts
N.O.
N.C.
 4
 0
 0
 4
 8
 0
 0
 8
12
 0
 0
12
Table 23.106: Voltage Codes—8501 XUDO and XDO Relays
DC Voltages for
8501 XUDO Relays ONLY
6
12
24
48
125
250
—
—
—
Code
V50
V51
V53
V56
V63
V67
—
—
—
Table 23.107: How to Order
To Order Specify:
DC Voltages for 8501 XDO
Relays
6
12
24
32
48
72
90
115/125
230/250
V50
V51
V53
V54
V56
V58
V59
V62
V66
Catalog Number
Type
Class
• Class Number
• Type Number
8501
XDO40
• Voltage Code
• For replacement coils, see Table 23.111.
• For UL and CSA approvals, see Square D NEMA Style AC Relays.
[8]
Code
Voltage Code
V53
Voltage code must be specified to order these products. Refer to Table 23.106 and insert the appropriate code as shown in Table 23.107.
23-30
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Type X
Industrial Relays
Class 8501 / Refer to Catalog 8501CT9601
schneider-electric.us
Attachments and Accessories for Square D™ NEMA Style Relays
Table 23.108: Type X™ Relays
Type
XTD1
XTD2
XTE1
XTE2
XJ1
Adder Decks—Adder decks are used to expand the number of poles on a relay. The basic 4-pole relay can be easily converted to an 8-pole
or 12-pole relay by installing one or two adder decks. The Class 8501 Type XB20 comes with 2 convertible contact cartridges and will accept
2 additional convertible contact cartridges. The Class 8501 Type XB40 comes with 4 convertible contact cartridges. The same Type XB adder
deck is used for both the middle and upper decks of the AC or DC relay.
With 2 N.O. contact cartridges
XB20
With 4 N.O. contact cartridges
XB40
Contact Cartridges—The Type X relay offers 4 Types of contact cartridges. All are color–coded for visual identification of each Type.
Standard Cartridge—The standard cartridge, used for most applications, has a black case.
Overlapping Cartridge—Same NEMA Type A600 AC rating as standard cartridge and a NEMA Type P150 DC rating. When it is used in the
N.O. mode it will close early and when used in the N.C. mode it will open late. If two or more are used together, the N.O. contacts will close
before the N.C. contacts open as the relay picks up. Overlap also occurs during dropout. Overlapping cartridge has a red case.
May be ordered factory installed:
Substitute 1 N.O. and 1 N.C. overlapping cartridges for 2 standard cartridges.
•
•
•
•
Substitute 2 N.O. and 2 N.C. overlapping cartridges for 4 standard cartridges.
Substitute 3 N.O. and 3 N.C. overlapping cartridges for 6 standard cartridges.
Substitute 4 N.O. and 4 N.C. overlapping cartridges for 8 standard cartridges.
Master Cartridge—Features the same contact ratings as the Type XC1 standard cartridge except it has a 20 ampere continuous current
rating instead of 10 amperes. It can be used in circuits where a master relay is required. Master cartridge has a blue case. Maximum of 6
master cartridges may be used on any 7 and 8-pole AC relays. Do not use any master cartridges on 9-12-pole AC or any DCoperated devices. Note: If master cartridges are added to a standard relay, attachments (latch mechanism, timers, etc.) cannot be
used.
Mounting Track—The mounting track has pre-punched mounting holes to simplify mounting the track on the control panel. The relay
mounting screws are factory installed on the track so that the relays can be hung prior to tightening the screws.
 9 in. long for 4 relays
18 in. long for 8 relays
27 in. long for 12 relays
36 in. long for 16 relays
XC1
XC2
Form
Y1591
Y1592
Y1593
Y1594
XC4
XM4
XM8
XM12
XM16
Manual Test Tool—Provides a means of manually switching the contacts of a basic relay or timing relay and holding all contacts in their
switched state until the tool is removed. This simplifies the checking of control circuits without power on the coil or contacts.
XA1
Transient Suppressor—Consists of an R-C circuit designed to suppress coil generated transients to approximately 200 percent of peak
voltage. It is particularly useful when switching the Type X relay near solid state equipment. It is designed for use on coils up to
120 Vac.
XS1
NEMA 1 Enclosure—Formed from sheet steel to provide strength and rigidity. Two conduit knockouts are located in both the top and bottom
of the enclosure. The enclosure is furnished with self tapping screws for mounting the relay inside the enclosure. Accommodates a single 4
or 8-pole AC or DC relay, 12-pole AC relay, 4-pole AC latching relay, and 4-pole AC timing relay.
NOTE: The 4-pole DC latching relay, 4-pole DC timing relay, 8-pole AC and DC latching relays and 12-pole utility auxiliary relay will not fit.
Class
9991
Type
UE7
Table 23.109: Mechanical Latch Attachment Voltage Codes
AC Voltage
24–60
24–50
120–60/110–50
208–60
240–60/220–50
277–60
480–60/440–50
600–60/550–50
Table 23.110: How to Order
To Order Specify:
•
•
•
•
[9]
Code
V01
V12
V02
V08
V03
V04
V06
V07
DC Voltage
6
12
18
24
48
72
90
115/125
230/250
Code
V50
V51
V99
V53
V56
V58
V59
V62
V66
Catalog Number
Class Number
Type Number
Class
Type
Voltage Code for mechanical latch attachment
8501
XTE1
Form for factory installed overlapping contacts
See Table 23.109.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-31
RELAYS AND TIMERS
Timer Lockout Cover—Fits over the time delay adjustment knob of any Type XT timing attachment. The Lockout Cover is designed to
protect the time setting against accidental adjustment. It mounts directly to the timing attachment with two included screws.
XL [9]
XDL[9]
23
Description
Mechanical Latch Attachment—Mounts on any 2 through 8-pole relay (except XMO master relay). The Type XL and XDL latch attachments
are identical in size and mounting provisions. The Type XLAC latch attachment has a continuous-duty-rated coil which is replaceable. The
Type XDLDC latch attachment has an intermittent–rated coil (replaceable) and should be connected through a N.O. contact of the
basic relay if the input signal is maintained to the unlatch coil.
AC Latch Attachment
DC Latch Attachment
Pneumatic Timer Attachment—Mounts only on any 0 through 4-pole AC or DC relays (except XMO master relay). It provides 1 N.O. and
1 N.C. convertible timed contacts, which are the same Type XC1 cartridges used on the basic relay. Two timing ranges are available, and
conversion from On Delay to Off Delay or vice versa is easy.
Off Delay
0.2–60 seconds
5–180 seconds
On Delay
0.2–60 seconds
5–180 seconds
Industrial Relays
Type X
Class 8501 / Refer to Catalog 8501CT9601
schneider-electric.us
Table 23.111: DC Relay Coil Selection
Equipment To Be Serviced
Class
Type
Coil Prefix,
or Class
and Type
8501
XD
XDL
XUD
9998 XD
9998 XDL
9998 XUD
Hz
—
—
—
6V
19
19
19
Suffix
(The complete coil number consists of prefix or the Class and Type, followed by suffix.)
12 V
18 V
24 V
32 V
48 V
64 V
72 V
90 V
110 V 115/125 220 V
V
28
34
37
40
46
49
52
55
—
58
—
28
34B
37B
40B
46B
49B
52B
55B
—
58B
—
58
[10]
28
—
37
—
46
—
—
—
—
—
230/250
V
67
67B
67[11]
Coil
Burden
Watts
18
50
16
23
Table 23.112: AC Relay Coil Selection
Equipment To Be Serviced
Class
Type
8501
XO,
XMO
Coil Prefix
or Class
and Type
9998 X [12]
—
60
50
Suffix
(The complete coil number consists of prefix or the Class and Type, followed by suffix.)
11024 V
120 V
208 V
220 V
240 V 277 V 380 V 440 V 480 V
550 V
115 V
23
24
—
44
44
—
51
52
52
53
53
—
55
—
—
—
—
62
62
—
—
65
Coil Volt-Amperes
600 V
In-rush
Sealed
65
—
148
143
23
25
RELAYS AND TIMERS
[10]
[11]
[12]
125 Vdc only
Not dual rated—250 Vdc only
To order an unlatch coil, add the letter L to the type number and the letter B to the suffix number. Example: for a 120 V 60 Hz unlatch coil, order a Class 9998 Type XL44B.
23-32
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Type SSL
Solid State Relays
Refer to Catalog DIA5ED2130302EN
schneider-electric.us
Zelio™ SSL Relays
Zelio SSL solid state relays offer the advantages of several input and output
configurations for both AC and DC switching applications. Their compact size and
modular design reduces space and allows easy mounting on the socket. Key features
include:
• Available with zero voltage switching for resistive load and random switching for
inductive load applications.
with reverse polarity protection circuit and LED indicator for easy identification
• Socket
of control status.
Table 23.113: Relays (sold in lots of 12)
Switching
Input
Voltage
3–12 Vdc
DC switching
15–30 Vdc
16–30 Vdc
38–72 Vdc
Zero voltage
switching
SSLVA1
Random
switching
3–12 Vdc
15–30 Vdc
38–72 Vdc
3–12 Vdc
15–30 Vdc
38–72 Vdc
Output
Voltage
Contact
Configuration
Load Current
Range
1–24 Vdc
1–48 Vdc
1–24 Vdc
1–48 Vdc
1–24 Vdc
1–48 Vdc
24–280 Vac
24–280 Vac
24–280 Vac
24–280 Vac
24–280 Vac
24–280 Vac
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
3.5 A
0.1 A
3.5 A
0.1 A
3.5 A
0.1 A
2A
2A
2A
2A
2A
2A
SPDT (1 C/O)
Catalog Number
SSL1D03JD
SSL1D101JD
SSL1D03BD
SSL1D101BD
SSL1D03ND
SSL1D101ND
SSL1A12JD
SSL1A12BD
SSL1A12ND
SSL1A12JDR
SSL1A12BDR
SSL1A12NDR
Table 23.114: Sockets (sold in lots of 10)
Control Voltage
5 Vdc
RSL Z2
24 Vdc
60 Vdc
110 Vac/Vdc
230 Vac/Vdc
RSL Z3
For Use with Relays
Screw Connector
Catalog Number
SSL1D03JD
SSL1D101JD
SSL1A12JD
SSL1A12JDR
SSL1D03BD
SSL1D101BD
SSL1A12BD
SSL1A12BDR
SSL1D03ND
SSL1D101ND
SSL1A12ND
SSL1A12NDR
SSL1D03ND
SSL1D101ND
SSL1A12ND
SSL1A12NDR
SSL1D03ND
SSL1D101ND
SSL1A12ND
SSL1A12NDR
Table 23.115: Accessories
Description
ID tags (2 sheets of 64 tags)
Bus jumper (10 x 20-pole jumper)
Butterfly isolator (10 isolators)
Socket Type
Spring Terminal
Catalog Number
SSLZVA1
SSLZRA1
SSLZVA1
SSLZRA1
SSLZVA2
SSLZRA2
SSLZVA3
SSLZRA3
SSLZVA4
SSLZRA4
Compatibility
RSL series sockets,
SSL series sockets
Catalog Number
RSLZ5
RSLZ2
RSLZ3
Approvals for SSL Relays
File:
E173076
CCN:
NRNT2,
NRNT8
File:
257594
Class:
3211 07
IEC 60950–1
RoHS Compliant
File:
254977
Class:
3211 07
IEC 60950–1
RoHS Compliant
Approvals for SSLZ Sockets
File:
E172326
CCN:
SWIV2
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-33
RELAYS AND TIMERS
Refer to Online Relay Configurator.
23
SSL1A12JD
Solid State Relays
Type SSM
Refer to Catalog DIA5ED2130302EN
schneider-electric.us
Zelio™ SSM Relays
23
Zelio SSM solid state relays are ready-to-use modular relays with SCR/MOSFET outputs
for greater switching density. The unique IP20 housing design and integrated heat sink
with no exposed metal surface offers compactness and enhances operating conditions
of the relay. SSM relays are DIN rail mounted and available with zero voltage switching
for resistive load and random switching for inductive load applications. The SSM relay
range comprises:
• SSM1: Single channel, single-phase relays with 6 A and 12 A ratings
• SSM2: Dual channel, single-phase relays with 6 A rating
Refer to Online Relay Configurator.
Table 23.116: SSM1 Single Channel Solid State Relays (sold in lots of 1)
RELAYS AND TIMERS
Switching
Input
Voltage
SSM1A36BD
Ouput Voltage
1–60 Vdc
DC
switching
4–32
Vdc
1–100 Vdc
24–280 Vac
4–32
Vdc
48–600 Vac
SSM1A312BD
Zero voltage
switching
18–36
Vac
24–280 Vdc
48–600 Vac
90–140
Vac
24–280 Vac
48–600 Vac
200–265
Vac
24–280 Vac
48–600 Vac
24–280 Vac
4–32
Vdc
48–600 Vac
Random
switching
18–36
Vac
24–280 Vac
48–600 Vac
90–140
Vac
24–280 Vac
48–600 Vac
200–265
Vac
24–280 Vac
48–600 Vac
23-34
Contact
Configuration
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
SPST N.O.
(1 N/O)
Load Current
Range
6A
12 A
6A
12 A
6A
12 A
6A
12 A
6A
12 A
12 A
6A
12 A
12 A
6A
12 A
12 A
6A
12 A
6A
12 A
6A
12 A
12 A
6A
12 A
12 A
6A
12 A
12 A
Motor Load
Rating
Catalog Number
–
SSM1D26BD
–
SSM1D212BD
–
SSM1D36BD
–
SSM1D312BD
1/6 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/6 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/6 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/6 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/6 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/6 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/6 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/6 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/6 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/6 hp
@ 240 Vac
1/3 hp
@ 240 Vac
1/3 hp
@ 240 Vac
SSM1A16BD
SSM1A112BD
SSM1A36BD
SSM1A312BD
SSM1A16B7
SSM1A112B7
SSM1A312B7
SSM1A16F7
SSM1A112F7
SSM1A312F7
SSM1A16P7
SSM1A112P7
SSM1A312P7
SSM1A16BDR
SSM1A112BDR
SSM1A36BDR
SSM1A312BDR
SSM1A16B7R
SSM1A112B7R
SSM1A312B7R
SSM1A16F7R
SSM1A112F7R
SSM1A312F7R
SSM1A16P7R
SSM1A112P7R
SSM1A312P7R
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Type SSM
Solid State Relays
Refer to Catalog DIA5ED2130302EN
schneider-electric.us
Table 23.117: SSM2 Dual Channel Solid State Relays (sold in lots of 1)
Switching
Input
Voltage
Zero voltage
switching
4–32
Vdc
Random
switching
4–32
Vdc
Ouput Voltage
24–280 Vac
48–600 Vac
24–280 Vac
48–600 Vac
Contact
Configuration
DPST N.O.
(2 N/O)
DPST N.O.
(2 N/O)
DPST N.O.
(2 N/O)
DPST N.O.
(2 N/O)
Load Current
Range
Catalog Number [1]
6
SSM2A16BD
6
SSM2A36BD
6
SSM2A16BDR
6
SSM2A36BDR
File: E359576
CCN: NMFT2,
NMFT8
File: 257594
Class: 3211 04
IEC
60950-1
RoHS
Compliant
23
SSM2A36BD
RELAYS AND TIMERS
Approvals for SSM Relays
[1]
4–pin connector for dual channel output only. Mating connector: MOLEX 050579404 or equivalent.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-35
Solid State Relays
Type SSRP and SSRD
Refer to Catalog DIA5ED2130302EN
schneider-electric.us
Zelio™ SSRP and SSRD Relays
23
Zelio SSRP and SSRD relays do not have any moving parts to wear out. Combined with
vibration resistance, arc-less switching and the lack of acoustical noise, solid state relays
are the ideal product for switching applications that demand reliable execution. For
added reliability, the Zelio SSRP and SSRD solid state relays use Direct Copper Bonding
(DCB) technology to decrease internal temperatures and improve the overall quality of
the product. The SSR solid state relay range comprises:
• Relays for DIN rail mounting: SSRD
• Relays for panel mounting: SSRP
SSRPCDS25A1
RELAYS AND TIMERS
Key features include:
• Input voltage range 3–32 Vdc, 90–280 Vac
• Breaking capacities up to 125 A
• Zero voltage turn on, low EMI/RFI
• No moving parts
• Shock and vibration resistant
• No acoustical noise
• Fast response
• Arc-less switching
• Long life (>109 operations typical)
Refer to Online Relay Configurator.
Table 23.118: SSRP Single Channel Solid State Relays (sold in lots of 1)
Switching
Input Voltage
Ouput Voltage
DC switching
3.5–32 Vdc
0–100 Vdc
3–32 Vdc
24–280 Vac
SSRDCDS10A1
48–530 Vac
4–32 Vdc
Zero voltage
switching
48–660 Vac
24–280 Vac
90–280 Vdc
48–530 Vac
48–660 Vac
Contact
Configuration
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
Load Current
Range
12
25
40
10
25
50
75
90
125
10
25
50
75
90
125
Catalog Number
[2]
SSRPCDM12D5
SSRPCDM25D5
SSRPCDM40D5
SSRPCDS10A1
SSRPCDS25A1
SSRPCDS50A1
SSRPCDS75A2
SSRPCDS90A3
SSRPCDS125A3
SSRPP8S10A1
SSRPP8S25A1
SSRPP8S50A1
SSRPP8S75A2
SSRPP8S90A3
SSRPP8S125A3
Table 23.119: SSRD Single Channel Solid State Relays (sold in lots of 1)
Switching
Zero voltage
switching
SSRDCDS45A1
Input Voltage
Ouput Voltage
90–280 Vac
24–280 Vac
90–140 Vac
24–280 Vac
4–32 Vdc
24–280 Vac
3–32 Vdc
24–280 Vac
Contact
Configuration
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
SPST N.O. (1 N/O)
Load Current
Range
10
20
30
45
10
20
30
45
Catalog Number
SSRDP8S10A1
SSRDP8S20A1
SSRDP8S30A1
SSRDF8S45A1
SSRDCDS10A1
SSRDCDS20A1
SSRDCDS30A1
SSRDCDS45A1
Approvals for SSRP and SSRD Relays
File: E258297
CCN: NRNT2,
NRNT8
File: 230765
Class: 3211 07
IEC
60950-1
RoHS
Compliant
SSRAH1
[2]
See Table 23.121 for accessories.
23-36
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Type SSP
Solid State Relays
Refer to Catalog DIA5ED2130302EN
schneider-electric.us
Zelio™ SSP Relays
Zelio SSP solid state relays are three-phase panel mounted relays with IP20 housing.
The SCR outputs allow them to be used in various power switching applications. These
power relays with 25 A and 50 A current rating are EMC compliant. SSP relays are
integrated with an R-C snubber circuit and TVS (Transient Voltage Suppression). They
are available with zero voltage switching for resistive load and random switching for
inductive load applications.
Refer to Online Relay Configurator.
Input
Voltage
4–32
Vdc
Ouput
Voltage
Contact
Configuration
Load
Current
Range
25 A
48–530 Vac
3PST N.O.
(3 N/O)
50 A
18–36
Vac
25 A
48–530 Vac
3PST N.O.
(3 N/O)
50 A
Zero voltage
switching
90–140
Vac
25 A
48–530 Vac
3PST N.O.
(3 N/O)
50 A
180–280
Vac
25 A
48–530 Vac
3PST N.O.
(3 N/O)
50 A
25 A
4–32
Vdc
48–530 Vac
3PST N.O.
(3 N/O)
50 A
25 A
18–36
Vac
48–530 Vac
3PST N.O.
(3 N/O)
50 A
Random
switching
25 A
90–140
Vac
48–530 Vac
3PST N.O.
(3 N/O)
50 A
25 A
180–280
Vac
48–530 Vac
3PST N.O.
(3 N/O)
50 A
[3]
Motor Load
Rating
3/4 hp @ 120 Vac
1 hp @ 240 Vac
3 hp @ 480 Vac
4.4 hp @ 530 Vac
1.5 hp @ 120 Vac
3 hp @ 240 Vac
7.5 hp @ 480 Vac
8.8 hp @ 530 Vac
3/4 hp @ 120 Vac
1 hp @ 240 Vac
3 hp @ 480 Vac
4.4 hp @ 530 Vac
1.5 hp @ 120 Vac
3 hp @ 240 Vac
7.5 hp @ 480 Vac
8.8 hp @ 530 Vac
3/4 hp @ 120 Vac
1 hp @ 240 Vac
3 hp @ 480 Vac
4.4 hp @ 530 Vac
1.5 hp @ 120 Vac
3 hp @ 240 Vac
7.5 hp @ 480 Vac
8.8 hp @ 530 Vac
3/4 hp @ 120 Vac
1 hp @ 240 Vac
3 hp @ 480 Vac
4.4 hp @ 530 Vac
1.5 hp @ 120 Vac
3 hp @ 240 Vac
7.5 hp @ 480 Vac
8.8 hp @ 530 Vac
3/4 hp @ 120 Vac
1 hp @ 240 Vac
3 hp @ 480 Vac
4.4 hp @ 530 Vac
1.5 hp @ 120 Vac
3 hp @ 240 Vac
7.5 hp @ 480 Vac
8.8 hp @ 530 Vac
3/4 hp @ 120 Vac
1 hp @ 240 Vac
3 hp @ 480 Vac
4.4 hp @ 530 Vac
1.5 hp @ 120 Vac
3 hp @ 240 Vac
7.5 hp @ 480 Vac
8.8 hp @ 530 Vac
3/4 hp @ 120 Vac
1 hp @ 240 Vac
3 hp @ 480 Vac
4.4 hp @ 530 Vac
1.5 hp @ 120 Vac
3 hp @ 240 Vac
7.5 hp @ 480 Vac
8.8 hp @ 530 Vac
3/4 hp @ 120 Vac
1 hp @ 240 Vac
3 hp @ 480 Vac
4.4 hp @ 530 Vac
1.5 hp @ 120 Vac
3 hp @ 240 Vac
7.5 hp @ 480 Vac
8.8 hp @ 530 Vac
Catalog Number
[3]
SSP3A225BD
`
SSP3A250BD
SSP3A225B7
SSP3A250B7
SSP3A225F7
SSP3A250F7
SSP3A225P7
SSP3A250P7
SSP3A225BDR
SSP3A250BDR
SSP3A225B7R
SSP3A250B7R
SSP3A225F7R
SSP3A250F7R
SSP3A225P7R
SSP3A250P7R
Add a T to the end of the part number to order the SSP with a thermal pad interface.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-37
23
Switching
RELAYS AND TIMERS
Table 23.120: SSP Three-Phase Solid State Relays (sold in lots of 1)
SSP3A225P7
Solid State Relays
Type SSP
Refer to Catalog DIA5ED2130302EN
schneider-electric.us
Table 23.121: Accessories
Description
23
Heat sink panel mount
(lot of 10)
SSRHP02
SSRHP05
RELAYS AND TIMERS
Heat sink DIN rail mount
(lot of 1)
Thermal pad interface
(lot of 10)
Compatibility
1 x SSP
1 x SSRP
2 x SSRP
3 x SSRP
1 x SSP
1 x SSRP
2 x SSRP
3 x SSRP
1 x SSP
1 x SSRP
2 x SSRP
1 x SSRP
2 x SSRP
1 x SSRP
1 x SSRP
2 x SSRP
1 x SSP
1 x SSRP
2 x SSRP
SSRPP8S••••
SSRPCDS••••
SSRPCDM••••
Thermal Resistance
Catalog Number
0.2 °C/W
SSRHP02
0.5 °C/W
SSRHP05
1 °C/W
SSRHP10
1.7 °C/W
SSRHP17
2.5 °C/W
SSRHP25
0.9 °C/W
SSRAH1
1 °C/W
SSRHD10
—
SSRAT1
Approvals for SSP Relays
SSRHP10
23-38
SSRAT1
File: E359576
CCN: NMFT2,
NMFT8
File: 257594
Class: 3211 04
IEC
60950-1
RoHS
Compliant
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RE17
Timers
Refer to Catalog 9050CT0001
schneider-electric.us
Zelio™ RE17 Modular Timers
RE17LAMW
Supply
Voltage
Timing
Ranges
Output Type
Rated
Current
24–240 Vac/
Vdc
0.1 s to
100 h
SPST
Solid State
0.7 A
24–240 Vac
0.1 s to
100 h
SPST
Solid State
Functions
A
H
C
0.7 A
L, Li
A, At, B, C, H,
Ht, D, Di, Ac,
Bw
B
C
A, At
24 Vdc,
24–240 Vac
0.1 s to
100 h
H, Ht
SPDT Relay
8A
L, Li
A, At, B, C, H,
Ht, D, Di, Ac,
Bw
Ad, Ah, N, O,
P, Pt, T, Tt, W
A, At, B, C, H,
Ht, D, Di
RE17LMBM
L, Li
12 Vdc
0.1 s to
100 h
SPDT Relay
8A
12–240 Vac
0.1 s to
100 h
SPDT Relay
8A
12–240 Vac
0.1 s to
100 h
SPDT Relay
8A
A, At, B, C, H,
Ht, D, Di, Ac,
Bw
A, At, B, C, H,
Ht, D, Di, Ac,
Bw
A, At, B, C, H,
Ht, D, Di, Ac,
Bw
Function
Descriptions
[1]
Power On
delay
Interval
Off delay with
control signal
Asymmetrical
flasher
Multi-function
Interval with
control signal
Off delay with
control signal
Power on
delay
Interval
Asymmetrical
flasher
Catalog
Number
RE17LAMW
RE17LHBM
RE17LCBM
RE17LLBM
RE17LMBM
RE17RBMU
RE17RCMU
RE17RAMU
RE17RHMU
RE17RLMU
Multi-function
RE17RMMU
Multi-function
RE17RMXMU
Multi-function
RE17RMEMU
Asymmetrical
flasher
RE17RLJU
Multi-function
RE17RMJU
Multi-function
RE17RMMW
Multi-function
RE17RMMWS
Approvals for RE17 Timers
File: E173076
CCN: NRNT, NRNT7
File: 248382
Class: 3211–
06
IEC
61812–1
RoHS
Compliant
RE17RLMU
[1]
For detailed function definitions, see Table 23.128.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-39
23
Table 23.122: RE17 Series Timers
RELAYS AND TIMERS
The Zelio RE17 modular timer range is comprised of both 8 A relay and 0.7 A solid state
outputs. Thanks to its space saving 17.5 mm design, this relay is ideal for applications
that require a lot of control in a small foot print. The RE17 series is designed to attach to
a 35 mm DIN rail.
• Multifunction, dual function, or single function
• Multi-range (7 selectable ranges)
• Multivoltage
• Solid state or relay output options
Timers
RE48
Refer to Catalog 9050CT0001
schneider-electric.us
Zelio™ RE48 Panel Mount Timers
23
RE48ATM12MW
RE48AMH13MW
RELAYS AND TIMERS
The Zelio RE48 panel mount timer range is comprised of 5 A relay outputs. The unit can
be mounted either on a panel or on a DIN rail with the optional octal socket. Thanks to
the large selector knob, the user can quickly and easily see the current value selected
and change it if needed.
• Time unit selector knob
• Multifunction, single function, or dual function
• 1.2 second to 300 hour timing range
• Wide input voltage range
• 5 A relay outputs
• Panel-mounted or plug-in
• LED indication
Table 23.123: RE48 Series Timers
Pin
Configuration
Output
Type
1.2 s to
300 h
8–Pin Octal
DPDT
Relay
5A
1.2 s to
300 h
11–Pin
Octal
DPDT
Relay
5A
Supply
Voltage
Timing
Ranges
24–240
Vac/Vdc
24–240
Vac/Vdc
Rated
Current
Functions
A
RUZC3M
RE48ASOC11AR
A1, A2, H1,
H2
L, Li
A, B, C, Di
Function
Descriptions [2]
Power On
delay
Delay On
Energization,
Pulse-on
Energization
Asymmetrical flasher
Multifunction
Catalog Number
RE48ATM12MW
RE48AMH13MW
RE48ACV12MW
RE48AML12MW
Table 23.124: Sockets (sold in lots of 10)
RE48ASOC8SOLD
RE48ASOC11SOLD
Description
Mixed 8–Pin DIN Rail
Mountable Socket
Mixed 11–Pin DIN Rail
Mountable Socket
Mixed 11–Pin Mountable
Socket
Mixed 8–Pin Solder
Connector
Mixed 11–Pin Solder
Connector
Connection
Box lug connector,
DIN rail mount
Box lug connector
Solder connectors
Solder connectors
Compatibility
RE48ATM12MW,
RE48AMH13MW
RE48ACV12MW,
RE48AML12MW
RE48ACV12MW,
RE48AML12MW
RE48ATM12MW,
RE48AMH13MW
RE48ACV12MW,
RE48AML12MW
Catalog Number
RUZC2M
RUZC3M
RE48ASOC11SOLD
RE48ASOC8SOLD
RE48ASOC11SOLD
Table 23.125: Accessories (sold in lots of 10)
Description
Setting protective cover
Protective cover IP64
RE48ASETCOV
RE48AIPCOV
RE48 Series Timers
Catalog Number
RE48ASETCOV
RE48AIPCOV
Approvals for RE48 Timers
File: E173076
CCN: NRNT2,
NRNT8
[2]
Compatibility
File: 248382
Class: 3211 07
IEC 61812-1
RoHS
Compliant
For detailed function definitions, see Table 23.128.
23-40
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
REXL
Timers
Refer to Catalog 9050CT0001
schneider-electric.us
Zelio™ REXL Miniature Plug-In Timers
•
Miniature and plug-in (21 x 27 mm /
0.827 x 1.062 in.)
Single function: function A = delay on
energization
Rated current at 5 A
•
7 timing ranges (0.1 s to 100 h)
•
REXL2TM
•
Multivoltage
•
Excellent immunity to interference
•
Power on and relay energized indication
by 2 LEDs
Table 23.126: REXL Series Timers
Supply
Voltage
12 Vdc
24 Vdc
24 Vac
REXL4TM
120 Vac
230 Vac
12 Vdc
24 Vdc [4]
24 Vac [4]
120 Vac
230 Vac
Timing
Ranges
Pin Configuration
Output
Type
0.1 s to
100 h
0.1 s to
100 h
0.1 s to
100 h
0.1 s to
100 h
0.1 s to
100 h
0.1 s to
100 h
0.1 s to
100 h
0.1 s to
100 h
0.1 s to
100 h
0.1 s to
100 h
8-Pin Quick
Connect (Blade)
8-Pin Quick
Connect (Blade)
8-Pin Quick
Connect (Blade)
8-Pin Quick
Connect (Blade)
8-Pin Quick
Connect (Blade)
14-Pin Quick
Connect (Blade)
14-Pin Quick
Connect (Blade)
14-Pin Quick
Connect (Blade)
14-Pin Quick
Connect (Blade)
14-Pin Quick
Connect (Blade)
DPDT
Relay
DPDT
Relay
DPDT
Relay
DPDT
Relay
DPDT
Relay
4PDT
Relay
4PDT
Relay
4PDT
Relay
4PDT
Relay
4PDT
Relay
Rated
Current
Functions
5A
A
5A
A
5A
A
5A
A
5A
A
5A
A
5A
A
5A
A
5A
A
5A
A
Function
Descriptions [3]
Power On
delay
Power On
delay
Power On
delay
Power On
delay
Power On
delay
Power On
delay
Power On
delay
Power On
delay
Power On
delay
Power On
delay
Catalog
Number
REXL2TMJD
REXL2TMBD
REXL2TMB7
REXL2TMF7
REXL2TMP7
REXL4TMJD
REXL4TMBD
REXL4TMB7
REXL4TMF7
REXL4TMP7
Table 23.127: Sockets (sold in lots of 10)
RXZE2M114M
Contact Terminal Arrangement
Connection
Mixed
Box lug connector
Separate
Box lug connector
Box lug connector
For Use with Relays
REXL2TM••,
REXL4TM••
REXL2TM••
REXL4TM••
Catalog Number
RXZE2M114M
RXZES108M
RXZE2S114M
Approvals for REXL Timers
File: E173076
CCN: NRNT2,
NRNT8
File: 248382
Class: 3211 07
IEC 61812-1
RoHS
Compliant
Table 23.128: Timer Function Description
RXZE2S114M
Function
A
A1, A2
Ac
Ad
At
B
Bw
C
D
Di
H
H1, H2
Ht
L
Li
N
O
P
Pt
T
Tt
W
[3]
[4]
[5]
Function Description [5]
Power on delay relay
Delay on energization
On-delay and off-delay relay with control signal
Pulse delayed relay with control signal
Power on delay relay (summation) with control signal
Interval relay with control signal
Double interval relay with control signal
Off-delay relay with control signal
Symmetrical flasher relay (starting pulse off)
Symmetrical flasher relay (starting pulse on)
Interval relay
Pulse-on energization
Interval relay (summation) with control signal
Asymmetrical flasher relay (starting pulse off)
Asymmetrical flasher relay (starting pulse on)
Retriggerable interval relay with control signal on
Retriggerable interval delayed relay with control signal on
Pulse delayed relay with fixed pulse length
Pulse delayed relay (summation and fixed pulse length) with control signal
off
Bistable relay with control signal on
Retriggerable bistable relay with control signal on
Interval relay with control signal off
Timer
RE17, RE48, REXL
RE48
RE17
RE17
RE17
RE17, RE48
RE17
RE17, RE48
RE17
RE17, RE48
RE17
RE48
RE17
RE17, RE48
RE17, RE48
RE17
RE17
RE17
RE17
RE17
RE17
RE17
For detailed function definitions, see Table 23.128.
For 48 Vdc supply, additional resistor 560 ohms 2 W / 24 Vdc. For 48 Vac, additional resistor 390 ohms 4 W / 24 Vac.
See catalog 9050CT0001 for timing diagrams and detailed descriptions.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-41
23
•
RELAYS AND TIMERS
The Zelio REXL miniature plug-in timer range is comprised of DPDT and 4PDT single
On-delay function timers. The unit is designed to be mounted in a socket in a panel.
Thanks to the large selector knob, the user can quickly and easily see the current value
selected and change it if needed. Features include:
Timers
Type JCK
Class 9050 / Refer to Catalog 9050CT9601
schneider-electric.us
Square D™ JCK General Purpose Plug-In Timers
Square D 9050JCK timing relays are designed to provide low-cost timing in a plug-in
housing. The Types JCK11 through 59 provide ±1% repeat accuracy. The Types JCK60
and 70 offer ±0.1% repeat accuracy. These timers are directly interchangeable with
many other 8 and 11 pin octal base timers.
23
•
•
•
•
•
RELAYS AND TIMERS
9050JCK46V20
Up to ±0.1% repeat accuracy
Timing from 0.05 seconds to 999 hours
Available in 7 timing modes
DPDT contacts (2 N.O. and 2 N.C.)
10 A contact rating
•
•
•
•
•
Transient protected
Hold down spring available
Variable or fixed time delay
Horsepower rated
RoHS compliant
Table 23.129: Variable Time Delay
Knob Adjustable
Timing Range
0.1–10 seconds
0.3–30 seconds
0.6–60 seconds
1.2–120 seconds
1.8–180 seconds
0.1–10 minutes
0.3–30 minutes
0.6–60 minutes
1.2–120 minutes
On
Dela[1]
JCK11
JCK12
JCK13
JCK14
JCK15
JCK16
JCK17
JCK18
JCK19
Off
Delay[2]
[1]
JCK21
JCK22
JCK23
JCK24
JCK25
JCK26
JCK27
JCK28
JCK29
Off Delay
Power
Trigger[1]
JCK21PT
JCK22PT
JCK23PT
JCK24PT
JCK25PT
JCK26PT
JCK27PT
JCK28PT
JCK29PT
Interval[1]
One Shot
[2][1]
JCK31
JCK32
JCK33
JCK34
JCK35
JCK36
JCK37
JCK38
JCK39
JCK41
JCK42
JCK43
JCK44
JCK45
JCK46
JCK47
JCK48
JCK49
One Shot
Power
Trigger[1]
JCK41PT
JCK42PT
JCK43PT
JCK44PT
JCK45PT
JCK46PT
JCK47PT
JCK48PT
JCK49PT
Repeat
Cycle[3]
[1]
JCK51
JCK52
JCK53
JCK54
JCK55
JCK56
JCK57
JCK58
JCK59
Table 23.130: Fixed Time Delay
Timing Mode
Type[1][4][5]
On Delay
Timing Range (seconds)
0.1 to 180
181 to 3600
0.1 to 180
181 to 3600
0.1 to 180
181 to 3600
0.1 to 180
181 to 3600
0.1 to 180
181 to 3600
0.1 to 180
181 to 3600
0.1 to 180
181 to 3600
JCK1F(XXXX)
Off Delay [2]
JCK2F(XXXX)
Off Delay with Power
Trigger
JCK2F(XXXX)PT
Interval
JCK3F(XXXX)
One Shot [2]
JCK4F(XXXX)
One Shot with Power
Trigger
JCK4F(XXXX)PT
Repeat Cycle
JCK5F(XXXX)
Table 23.131: Voltage Codes
12 Vdc
24 Vac/Vdc
48 Vac/Vdc
120 Vac/110 Vdc
240–50/60 Vac
Voltage
Code
V36
V14
V17
V20
V24
Table 23.132: How to Order
•
•
•
[1]
[2]
[3]
[4]
[5]
To Order Specify:
Class Number
Type Number
Voltage Code
Class
Catalog Number
Type
Voltage Code
9050
JCK11
V20
Voltage code must be specified to order this product. Refer to the standard voltage codes listed in Table 23.131 and insert as shown in Table 23.132.
Initiating contact can be up to 50 feet from the timer.
Two dials are provided for independently adjustable repeat cycle timing ranges.
(XXXX) denotes the timing period in seconds.
Example: Class 9050 Type JCK1F60 is an On Delay timer fixed at 60 seconds.
Fixed repeat cycle timers can be supplied with the same or different On-Time and Off-Time.
23-42
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Timers
Type JCK
Class 9050 / Refer to Catalog 9050CT9601
schneider-electric.us
Type JCK60 and JCK70 Timers
Type JCK60
This On-Delay timer uses four push button thumbwheels to set the time delay. One
switch is used for the range. The remaining three are used for the time setting.
Table 23.133: Selection
Timing Ranges
0.01s
0.1s
S
0.1m
M
0.1h
H
On Delay
9050JCK60V14
Type
0.05–9.99 seconds
00.1–99.9 seconds
001–999 seconds
00.1–99.9 minutes
001–999 minutes
00.1–99.9 hours
001–999 hours
JCK60[6]
Type JCK70
This multifunction multirange time delay relay uses five push button thumbwheel
switches. Three switches are used for the time delay, one switch is used for the timing
range, and the other switch is used to select the timing mode.
RELAYS AND TIMERS
Timing
Modes
Timing
Modes
On Delay
Interval
Off Delay
One Shot
Repeat Cycle-Off[7]
Repeat Cycle-On
On/Off Delay
1 Shot Falling Edge
Watchdog
Trigger On Delay
9050JCK70V14
Table 23.135: Sockets
Contact Terminal
Arrangement
Mixed[9]
Connection
Screw Connector
8501NR61
Separate[10]
Screw Connector
Timing Ranges
Type
Same as JCK60
JCK70[6]
For Use with
Relays
JCK11–19
JCK31–39
JCK51–59
JCK60
JCK1 F
JCK3 F
JCK5 F
JCK21–29
JCK41–49
JCK70
JCK2F
JCK4F
JCK11–19
JCK31–39
JCK51–59
JCK60
JCK1 F
JCK3 F
JCK5 F
JCK21–29
JCK41–49
JCK70
JCK2F
JCK4F
23
Table 23.134: Selection
Sold in Lots of
Catalog Number[8]
1
8501NR51
10
8501NR51B
1
8501NR61
10
8501NR61B
1
8501NR52
10
8501NR52B
1
8501NR62
10
8501NR62B
Table 23.136: Accessories (sold in lots of 10)
Description
Metal Restraining Strap
8501NR52
For Use With
8501NR51 sockets
8501NR52 sockets
8501NR61 sockets
8501NR62 sockets
Sold in Lots of
Catalog Number
1
8501NH7
Approvals for 9050JCK Timers
File: E3190
CCN: NLDX2
File: E3190
CCN:
NLDX,
NLDX7[11]
File:
260367
Class:
3211 07
IEC
61810-1
RoHS
Compliant
8501NH7
[6]
[7]
[8]
[9]
[10]
[11]
Voltage code must be specified to order this product. Refer to the standard voltage codes listed in Table 23.131 and insert as shown in Table 23.132.
The repeat cycle mode uses the same on-time and off-time.
Please note that the B suffix only desginates quantities of 10 and is not printed on the socket.
The inputs and outputs are mixed on both sides.
The inputs and outputs are on separate sides.
When used with the appropriate 8501NR socket.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-43
Control and Measurement Relays
Type RTC48
Refer to Catalog DIA5ED2130503EN
schneider-electric.us
Zelio™ RTC48 Temperature Controllers
23
The cost-effective Zelio RTC48 temperature controllers combine simplicity, performance,
and value. With the Modbus open communication option, they easily interface with solidstate relays, plug-in relays, tower lights, PLCs, and HMIs. The units’ three color, 5-digit
LED display intelligently adapts to any variation in the process value and can be easily
read from a distance. The free configuration software simplifies setup via USB
connection to any laptop or PC. These temperature controllers are indispensable in the
execution of critical processes, such as in food and beverage, extrusion equipment,
injection machines, mold presses, thermo-forming, and horticulture and livestock
facilities. The Zelio RTC48 offer comprises a standard 48 x 48 mm (1/16-inch DIN)
format and provides the optimal balance of price and functionality, featuring the desirable
PID control with auto-tuning, outputs, and alarms.
RELAYS AND TIMERS
RTC48PUN1RNLU
Key features include:
• PID control algorithm with auto-tuning function
• Universal input types
• Adaptive display
• Modbus communication for easy data exchange with other automation products
• Optional programming cable for use with Zelio Temperature Control Soft configuration
software
Table 23.137: Catalog Numbers
Input Type
Supply
Voltage
Thermocouple:
RTCCBL
J, K, R, B,
S, T, E, N,
PL-2, C
(W/Re 526)
110–240
Vac
RTD:
Pt100,
JPt100,
3-wire
system
DC
Current:
RTCCOV
0–20 mA,
4–20 mA
DC
Voltage:
24
Vac/Vdc
0–1 Vdc,
0–5 Vdc,
1–5 Vdc,
0–10 Vdc
Output 1
Output 2
Alarms
Relay
SSR
Relay
SSR
Relay
SSR
Relay
SSR
Relay
SSR
Relay
SSR
Relay
SSR
Relay
SSR
Relay
SSR
Relay
SSR
Relay
SSR
Relay
SSR
Relay
SSR
Relay
SSR
–
–
–
–
Relay
Relay
–
–
Relay
Relay
SSR
SSR
SSR
SSR
–
–
–
–
Relay
Relay
–
–
Relay
Relay
SSR
SSR
SSR
SSR
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
Communication
on Modbus
–
–
RS485
RS485
–
–
–
–
RS485
RS485
–
–
RS485
RS485
–
–
RS485
RS485
–
–
–
–
RS485
RS485
–
–
–
–
Catalog Number
RTC48PUN1RNHU
RTC48PUN1SNHU
RTC48PUNCRNHU
RTC48PUNCSNHU
RTC48PUN1RRHU
RTC48PUN1SRHU
RTC48PUN2RNHU
RTC48PUN2SNHU
RTC48PUNCRRHU
RTC48PUNCSRHU
RTC48PUN1RSHU
RTC48PUN1SSHU
RTC48PUNCRSHU
RTC48PUNCSSHU
RTC48PUN1RNLU
RTC48PUN1SNLU
RTC48PUNCRNLU
RTC48PUNCSNLU
RTC48PUN1RRLU
RTC48PUN1SRLU
RTC48PUN2RNLU
RTC48PUN2SNLU
RTC48PUNCRRLU
RTC48PUNCSRLU
RTC48PUN1RSLU
RTC48PUN1SSLU
RTC48PUNCRSLU
RTC48PUNCSSLU
Table 23.138: RTC48 Temperature Controller Accessories
RTCACC
Catalog Number
Description
RTCCBL
RTCCOV
USB Communications Cable
Terminal Cover
Spare Parts Pack (Gasket, Shunt
and Mounting Frame)
RTCACC
For Use with Temperature
Controllers
RTC48********
Approvals for RTC48 Temperature Controllers
File: E327516
CCN: XAPX2
23-44
File: 257850
Class: 4813 02
IEC
61010-1
RoHS
Compliant
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Type REG
Control and Measurement Relays
Refer to Catalog 8430CT1001
schneider-electric.us
Zelio™ REG Temperature Controllers
Zelio REG temperature controllers offer seamless interfacing with solid state relays,
electromechanical relays, PLCs, variable speed drives and HMI displays make them a
key component to controlling the temperature in your process.
REG48PUN1RHU
RELAYS AND TIMERS
Key features include:
• Modbus communication for easy data exchange with other automation products
• Simple parameter settings
• IP66 certification enables dust resistance
• Flash memory (saves configurations)
• Compatible with a wide range of sensors
• Advanced Functions (standard): PID, fuzzy logic, auto-tuning, soft start
• Optimized programming
– Common software for all products in the temperature relay range (freely
downloadable from www.schneider-electric.us).
– A single cable enables connection to both a computer and PLCs.
– Simple adjustment of parameters.
– Saving of configurations.
Table 23.139: Zelio Temperature Controllers—24 x 48 Size — 1/32 DIN Standard
Input Type
Thermocouple:
J,K,R,B,S,T,
E,N,PL2,
RTD:
PT100
DC Voltage:
1–5 Vdc,
0–5 Vdc,
0–10 Vdc,
2–10 Vdc,
0–100 mVdc
DC Current:
0–20 mA,
4–20 mA
Supply
Voltage
100/240
Vac
24 Vac/
Vdc
100/240
Vac
24 Vac/
Vdc
–
1
–
1
–
–
–
–
–
–
–
Comm.
on
Modbus
Yes
Yes
Yes
–
Yes
Yes
Yes
Yes
Yes
Yes
Yes
REG24PTP1RHU
REG24PTP1ARHU
REG24PTP1LHU
REG24PTP1ALHU
REG24PTP1JHU
REG24PTP1RLU
REG24PTP1LLU
REG24PTP1JLU
REG24PUJ1RHU
REG24PUJ1LHU
REG24PUJ1RLU
–
Yes
REG24PUJ1LLU
Output 1
Output 2
Alarms
Relay
Relay
SSR
SSR
Analog (4-20 mA)
Relay
SSR
Analog (4-20 mA)
Relay
SSR
Relay
–
–
–
–
–
–
–
–
–
–
–
SSR
–
Catalog Number
Table 23.140: Zelio Temperature Controllers—48 x 48 Size — 1/16 DIN Standard
Input Type
Thermocouple:
J,K,R,B,S,T,
E,N,PL2,
RTD:
PT100,
Supply
Voltage
100/240
Vac
DC Voltage:
1–5 Vdc,
0–5 Vdc,
0–10 Vdc,
2–10 Vdc,
0–100 mVdc
DC Current:
0–20 mA,
4–20 mA
2
Yes
REG48PUN2LJHU
2
2
2
2
2
Yes
Yes
Yes
Yes
Yes
REG48PUN1RLU
REG48PUN2RLU
REG48PUN1LLU
REG48PUN2LRLU
REG48PUN1JLU
2
Yes
REG48PUN2LJLU
Alarms
Relay
Relay
Relay
SSR
SSR
SSR
Analog (4-20 mA)
–
–
Relay
SSR
SSR
Relay
Relay
Relay
Relay
SSR
Analog (4-20 mA)
SSR
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
REG48PUN1RHU
REG48PUNL1RHU
REG48PUN2RHU
REG48PUN1LHU
REG48PUNL1LHU
REG48PUN2LRHU
REG48PUN1JHU
Output 2
SSR
24 Vac/
Vdc
2
2
2
2
2
2
2
Comm.
on
Modbus
Yes
–
Yes
Yes
–
Yes
Yes
Output 1
–
Analog
(4-20 mA)
–
Relay
–
Relay
–
Analog
(4-20 mA)
Catalog Number
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-45
23
REG24PTP1RHU
Offer includes 3 versions:
• A 24x48 mm (1/32 DIN) cost effective solution for basic temperature control needs.
• A 48x48 mm (1/16 DIN) balanced version for optimal price and functionality.
• A 96x48 mm (1/8 DIN) full-featured version for complete performance and function.
Control and Measurement Relays
Type REG
Refer to Catalog 8430CT1001
schneider-electric.us
Table 23.141: Zelio Temperature Controllers—96 x 48 Size — 1/8 DIN Standard
Input Type
Thermocouple:
J,K,R,B,S,T,
E,N,PL2
23
RTD:
PT100
REG96PUN1RHU
DC Voltage:
1–5 Vdc,
0–5 Vdc,
0–10 Vdc,
2–10 Vdc,
0–100 mVdc
RELAYS AND TIMERS
DC Current:
0–20 mA,
4–20 mA
Supply
Voltage
100/
240 Vac
REG96PUN1RHU
REG96PUNL1RHU
REG96PUN2RHU
REG96PUN1LHU
REG96PUNL1LHU
REG96PUN2LRHU
REG96PUN1JHU
3
Yes
REG96PUN2LJHU
3
3
3
3
3
3
Yes
Yes
Yes
Yes
Yes
Yes
REG96PUN1RLU
REG96PUN2RLU
REG96PUN1LLU
REG96PUN2LRLU
REG96PUN1JLU
REG96PUN2LJLU
Output 2
Alarms
Relay
Relay
Relay
SSR
SSR
SSR
Analog (4-20 mA)
–
–
Relay
–
–
Relay
SSR
24
Vac/
Vdc
3
3
3
3
3
3
3
Comm.
on
Modbus
Yes
–
Yes
Yes
–
Yes
Yes
Output 1
Relay
Relay
SSR
SSR
Analog (4-20 mA)
Analog (4-20 mA)
–
Analog
(4-20 mA)
–
Relay
–
Relay
–
SSR
Catalog Number
Table 23.142: Temperature Controller Accessories
Description
Bracket for mounting on DIN rail
Terminal block cover
For Use with Relays
24 x 48 mm (1/32 DIN)
48 x 48 mm (1/16 DIN)
96 x 48 mm (1/8 DIN)
Sold in Lots Of
4
2
2
Catalog Number
REG24PSOC
REG48PCOV
REG96COV
Approvals for Zelio REG Temperature Controllers
File: E327516
CCN: XAPX2
23-46
File: 245853
Class: 4813 02
IEC 61010-1
RoHS
Compliant
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RM17JC and RM35JA
Control and Measurement Relays
Refer to Catalog 8430CT0601
schneider-electric.us
Zelio™ Current Measurement Relays
RM35JA Current Control Relays
• Selection between overcurrent or
undercurrent
• Automatic DC or AC recognition
• Selectable memory function
RM17JC Current Control Relay
Monitors AC currents
Designed to monitor overcurrent
Equipped with an integrated current
transfmormer
•
•
•
Table 23.143: Zelio Current Measurement Relays
RM17JC00MW
Measurement Range
Range[1]
Terminals
2–20 A
N/A
2–20 mA
E1-M
10–100 mA
E2-M
50–500 mA
E3-M
0.15–1.5 A
E1-M
0.5–5 A
E2-M
1.5–15 A
E3-M
Supply Voltage
24–240 Vac/dc
Width
Output
5A
1 C/O
Inches
0.69
mm
17.50
2 C/O
1.38
35.00
Catalog Number
RM17JC00MW
RM35JA31MW
RM35JA32MW
RELAYS AND TIMERS
Zelio Current Measurement Relays are designed to measure under and overcurrent
conditions, without external sensors. Current measurement relays enable continuous
monitoring of the operation of electrical and mechanical loads such as motors and
heaters. They are DIN rail mountable and the control status is indicated by an LED.
Table 23.144: Output Characteristics and Measurement Circuit Characteristics
RM35JA31MW
Hysteresis
Time delay accuracy (with constant
parameters)
Time delay on pick-up
Conforming to standards
Storage
Ambient air temperature
Operaaround the device
tional
RM17JC00MW
RM35JA31MW
RM35JA32MW
Plus or minus 10% of the full scale value
23
Type of Relay
Setting accuracy
Repeat accuracy (with constant
parameters)
Plus or minus 0.5%
15% of the threshold
setting, fixed
5 to 50% of the threshold setting, adjustable
N/A
Plus or minus 2%
500 ms
300 ms
NF EN 60255-6
-40 to 158 degrees F (-40 to +70°C)
-4 to 122 degrees F (-20 to +50°C)
Approvals for Zelio Current Measurement Relays
RM35JA32MW
File: E173076
CNN: NRNT,
NRNT7
CE: 73/23/EEC
and EMC 89/
336/EEC
File: 248382
Class: 3211 07
GL, C-Tick,
GOST, RoHS
Approximate Dimensions
1 C/O =
72/2.83
RM35JA3•MW
RM17JC00MW
35/1.38
A1 A2 E3 E2 E1 M
17.5
0.69
97/3.82
2C/O =
90/3.54
2.8
0.11
2.8
0.11
90/3.54
10/0.39
12 11 14 22 21 24
76/2.99
72.5/2.85
101/3.98
97.5/3.84
Dual Dimensions:
[1]
INCHES
Millimeters
Above 15 A, a current transformer can be connected (for RM35JA3•MW). See page 57 of catalog 8430CT0601 for suggested wiring.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-47
RM17T•00
Control and Measurement Relays
Refer to Catalog 8430CT0601
schneider-electric.us
Zelio™ Phase Measurement Relays
Zelio Phase Measurement Relays monitor their own power supply. Relay status is
indicated by an LED and they are DIN rail mountable.
RM17TG•0 measurement and control relays are for monitoring of 3-phase supplies for
the correct sequencing of phases L1, L2, and L3, as well as the total loss of one or more
phases.
23
Table 23.145: 3-Phase Supply Control Relays
Supply
Voltage
208–480 Vac
208–440 Vac
Detection
Threshold
<100 Vac
Output
5A
1 C/O
2 C/O
inches
Width
Catalog
Number
RM17TG00
RM17TG20
mm
0.69
17.50
RELAYS AND TIMERS
Table 23.146: Multifunction 3-Phase Supply Control Relays
Supply
Voltage
RM17TG•0
Voltage
Range
Selectable
voltages:
208, 220, 380,
400, 415, 440,
480
208–480 Vac
Output
5A
inch
1 C/O
0.69
Width
Catalog
Number
RM17TT00
RM17TA00
RM17TU00
RM17TE00
mm
17.50
Table 23.147: RM17TT, RM17TA, RM17TU, and RM17TE Multifunction Control
Relays monitor the following on 3-phase supplies:
Function
Sequence of phases L1, L2 and L3
Phase failure with regeneration (0.7 x selected
voltage range)
Asymmetry (phase imbalance)
Undervoltage
Overvoltage and undervoltage
RM17TT
Yes
RM17TA
Yes
RM17TU
Yes
RM17TE
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
No
No
Yes
No
Yes
No
Yes
Table 23.148: 3-Phase Supply and Motor Temperature Control Relays
RM17TE00
Supply
Voltage
Measurement
Range
Output
5A
inch
220–480 Vac
208–480 Vac
2 N.O.
1.38
Width
Catalog
Number
RM35TM50MW
RM35TM250MW
mm
35.00
RM17TA00
Table 23.149: RM35TM Control Relays monitor the following on 3-phase supplies:
Function
Sequence of phases L1, L2 and L3
Phase failure
Motor temperature via PTC probe
Selection (with or without memory)
Test-reset button
RM35TM50MW
Yes
Yes
Yes
No
No
RM35TM250MW
Yes
Yes
Yes
Yes
Yes
RM35TF30 measurement and control relay is for monitoring of phase sequence, phase
failure, asymmetry, undervoltage and overvoltage in window mode.
Table 23.150: Multifunction 3-Phase Supply Control Relays
RM35TM••MW
RM35TF30
Supply
Voltage
220–480 Vac
Measurement
Range
194–528 Vac
Output
5A
2 C/O
inch
1.38
Width
Catalog
Number
RM35TF30
mm
35.00
Approvals for Zelio Phase Measurement Relays
File: E173076
CNN: NRNT,
NRNT7
CE: 73/23/EEC
and EMC 89/
336/EEC
File: 248382
Class: 3211 07
GL, C-Tick,
GOST, RoHS
Approximate Dimensions
RM35•
1 C/O =
72/2.83
35/1.38
72/2.83
RM17•
17.5
0.69
2.8
0.11
2 N/O =
2.8
0.11
90/3.54
90/3.54
2 C/O =
76/2.99
76/2.99
72.5/2.85
72.5/2.85
Dual Dimensions:
23-48
INCHES
Millimeters
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RM17UB, RM35UB, RM17UAS, RM17UBE,
RM35UA1•MW
schneider-electric.us
Control and Measurement Relays
Refer to Catalog 8430CT0601
Zelio™ Voltage Measurement Relays
Zelio Voltage Measurement Relays are DIN rail mountable and relay status is indicated
by an LED. Single phase and DC voltage measurement and control relays RM17UAS••
and RM17UBE•• monitor:
•
•
•
•
Overvoltage
Undervoltage
Overvoltage and undervoltage
Nominal voltages
Table 23.151: Single-phase and DC voltage control relays
RM17UB310
12 Vdc
24–48 Vac/Vdc
110–240 Vac/Vdc
24–48 Vac/Vdc
110–240 Vac/Vdc
RM17UAS••
Ranges
Controlled
9–15 Vdc
20–80 Vac/Vdc
65–260 Vac/Vdc
20–80 Vac/Vdc
65–260 Vac/Vdc
Width
Output
5A
in.
1 C/O
0.69
Catalog Number
mm
RM17UAS14[2]
RM17UAS16[2]
RM17UAS15[2]
RM17UBE16[3]
RM17UBE15[3]
17.50
Multifunction voltage control relays RM35UA1•MW monitor both AC and DC voltages.
• Automatic Vdc or Vac recognition
• Selection between overvoltage and undervoltage
RELAYS AND TIMERS
Supply Voltage
Table 23.152: Multifunction voltage control relays
24–240
Vac/Vdc
RM35UA1•MW
Width
Output
5A
in.
Catalog
Number
mm
RM35UA11MW
2 C/O
1.38
35.00
RM35UA12MW
RM35UA13MW
3-phase voltage control relays monitor:
•
•
•
•
•
Failure of one or more phases
Voltage between phases
Absence of neutral
Voltage between phases and neutral
Overvoltage and undervoltage
Table 23.153: Three-phase voltage control relays
Rated 3-Phase
Supply Voltage Vac
Measurement
Range
220–480 phase-phase
195–528 Vac
120–277 phase-neutral
183–528 Vac
120–277 phase-neutral
114–329 Vac
Output
5A
1 C/O + 1 C/O
1 per threshold
1 C/O
1 C/O + 1 C/O
1 per threshold
Width
mm
Catalog
Number
1.38
35.00
RM35UB330[5]
0.69
17.50
RM17UB310[5]
1.38
35.00
RM35UB3N30[4]
in.
Approvals for Zelio Voltage Measurement Relays
File: E173076
CNN: NRNT,
NRNT7
RM35UB3•••
CE 73/23/EEC
and EMC 89/
336/EEC
File: 248382
Class: 3211 07
GL, C-Tick,
GOST, RoHS
Approximate Dimensions
RM35•
1 C/O =
72/2.83
35/1.38
72/2.83
RM17•
17.5
0.69
2.8
0.11
2.8
0.11
90/3.54
90/3.54
2 C/O =
76/2.99
76/2.99
72.5/2.85
72.5/2.85
Dual Dimensions:
[2]
[3]
[4]
[5]
INCHES
Millimeters
Provides overvoltage or undervoltage protection.
Provides overvoltage and undervoltage protection in window mode.
Provides overvoltage and undervoltage protection between phases and neutral and absence of neutral.
Provides overvoltage and undervoltage protection between phases.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-49
23
Measurement Range
Range[4]
Terminals
0.05–0.5 V
E1-M
0.3–3 V
E2-M
0.5–5 V
E3-M
1–10 V
E1-M
5–50 V
E2-M
10–100 V
E3-M
15–150 V
E1-M
30–300 V
E2-M
60–600 V
E3-M
Supply
Voltage
RM35L•••MW, RM35BA10
Control and Measurement Relays
Refer to Catalog 8430CT0601
schneider-electric.us
Zelio™ Level Control Relays and Zelio™ Pump Control Relays
Zelio level control relays control one or two levels with fill or empty function. The settings
are protected by a sealable cover, control status is indicated by an LED, and they are
DIN rail mountable. RM35LM is designed to control levels of conductive liquid, and
RM35LV is designed to control levels of other materials.
Application examples for RM35LM:
Detecting pump seal failures
Spring, town, industrial and sea water
Metallic salt, acid or base solutions
Liquid fertilizers
Non-concentrated alcohol (<40%)
23
•
•
•
•
•
RELAYS AND TIMERS
RM35LM33MW
RM35LV14MW
Application examples for RM35LV:
• Liquids in the food-processing industry:
milk, beer, coffee, etc.
• Chemically pure water
• Fuels, liquid gasses (inflammable)
• Oil, concentrated alcohol (>40%)
glycol, paraffin, varnish and
• Ethylene,
paints
Table 23.154: Level Control Relays
Time Delay on
Crossing the
Threshold
0.1–5 seconds,
0 + 10%
Function
Output Relay
Detection by
resistive probes
2 C/O, 5 A
Detection by
discrete sensors
1 C/O, 5 A
Table 23.155: Probes
RM79696043
LA9RM201
Recommended for drink vending
machines and where installation space is
limited (stainless steel)[6]
Suitable for boilers, pressure vessels, and
under high temperature conditions (1)
(304 stainless steel)[6]
Measurement
Ranges
Catalog
Number
24–240 Vac/Vdc
250–5 k
5 k–100 k
50 k–1 M
RM35LM33MW
—
RM35LV14MW
Operating temperature
°F
°C
Max.
Pressure
kg/cm2
Catalog
Number
3
176
80
2
RM79696044
1
392
25
200
RM79696014
No. of
probes
Application
Supply Voltage
50/60 Hz
Table 23.156: Probes
Description
Protected probe for mounting by suspension, protective shell PUC (S7) Electrode: stainless
steel
Liquid level control probe, suspended by cable, maximum operating temperature
212 °F (100 °C)[7]
RM79696006
Table 23.157: Electrode Holders
Description
Electrode for use up to 662°F (350°C)
[6]
[7]
Material
Stainless steel isolated by ceramic
Catalog
Number
RM79696043
LA9RM201
Catalog
Number
RM79696006
3/8 in. BSP mounting thread with hexagonal head. Use a 24 mm spanner for tightening.
3/8 in. BSP mounting head.
23-50
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RM35L•••MW, RM35BA10
Control and Measurement Relays
Refer to Catalog 8430CT0601
schneider-electric.us
Pump Control Relay
Zelio pump control relay RM35BA10 can operate on a single-phase or 3-phase supply. It
incorporates three functions in a signal unit:
Over and under current measurement
• Single or three phase
Phase presence control
It has two operating modes which are designed to control a pump via two external signal
inputs (Y1 Y2). These two signals are controlled by volt-free contacts. Control inputs Y1
and Y2 can be connected to:
•
•
RM35BA10
1 C/O =
2 C/O =
•
•
Level sensor
Level relay
Pressure sensor
Push button
Table 23.158: Pump Control Relay
Description
Current Range
Controlled
Pump Control Relay
1–10 A
Supply Voltage
Output
208–480 Vac, 3 phase
230, single-phase
Catalog
Number
1 C/O 5 A
RM35BA10
Approvals for Zelio Level Control and Pump Control Relays
File: E173076
CNN: NRNT,
NRNT7
CE 73/23/EEC
and EMC 89/
336/EEC
File: 248382
Class: 3211 07
GL, C-Tick,
GOST, RoHS
RM35LM33MW, RM35LV14MW
23
Approximate Dimensions (mm/in.)
RM35BA10
35/1.38
72/2.83
90/3.54
E1
L1 L2 L3
>I
<I
Def.
Un
90/3.54
35/1.38
72/2.83
2.8
0.11
2.8
0.11
R
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
76/2.99
76/2.99
72.5/2.85
72.5/2.85
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
RELAYS AND TIMERS
•
•
Y1 Y2
12 11 14
23-51
Control and Measurement Relays
RM35S, RM35HZ, RM35AT
Refer to Catalog 8430CT0601
schneider-electric.us
Zelio™ Speed Control Relays, Frequency Control Relays, and
Temperature Control Relays
23
Zelio speed control relay RM35SOMW monitors underspeed and overspeed conditions,
with or without memory, with inhibition by an external contact. It operates with either N.O.
or N.C. sensors. Adjustable time between impulses is 0.05 s to 10 min. Power-on
inhibition time is adjustable from 0.6 to 60 s. Inhibition is controlled by an external
contact. Settings are protected by a sealable cover, control status is indicated by an LED,
and it is DIN rail mountable.
Table 23.159: Speed Control Relay
Time
Delay
Function
RELAYS AND TIMERS
RM35S0MW
Underspeed
Overspeed
Supply
Output
Catalog Number
24–240 Vac/
Vdc
1 C/O
5A
RM35S0MW
Measurement Input
0.05 s to
10 min
3-wire PNP or NPN proximity sensor
Namur type proximity sensor 0–30 V voltage
Volt-free contact
Zelio frequency control relay RM35HZ monitors its own supply voltage. Settings are
protected by a sealable cover, control status is indicated by an LED, and it is DIN rail
mountable.
Table 23.160: Frequency Control Relay
Controlled
Supply
Voltage
40–60 Hz (50 Hz) /
50–70 Hz (60 Hz)
120–277 Vac
Function
Over frequency and under frequency
(50 or 60 Hz)
RM35HZ21FM
Catalog
Number
Output
1 C/O +
1 C/O
5A
RM35HZ21FM
Zelio temperature control relays are designed for monitoring the temperature in elevator
(lift) rooms, in compliance with directive EN81. For use with PT100 input (customer
supplied). Features adjustable control, control status indicated by an LED, and is DIN rail
mountable.
Table 23.161: Temperature Control Relays
Function
Supply Voltage
Over temperature 93 to 114°F (34 to 46°C)
24–240
Vac/Vdc
Over temperature 93 to 114 °F (34 to 46°C)
Under temperature 30 to 51°F (-1 to 11°C)
Phase sequence
Phase failure
RM35AT•0MW
1 C/O
5A
2 N.O.
5A
—
Under temperature 30 to 51°F (-1 to 11°C)
Catalog
Number
Output
Vac
—
208–480 Vac
2 N.O.
5A
RM35ATL0MW
RM35ATR5MW
RM35ATW5MW
Approvals for Zelio Speed, Frequency, and Temperature Control Relays
File: E173076
CNN: NRNT,
NRNT7
CE: 73/23/EEC
and EMC 89/
336/EEC
File: 248382
Class: 3211 07
GL, C-Tick,
GOST, RoHS
Approximate Dimensions (mm/in.)
RM35S0MW
72/2.83
1 C/O =
RM35HZ21FM
35/1.38
A1 A2
35/1.38
72/2.83
2.8
0.11
2.8
0.11
90/3.54
90/3.54
2 N/O =
72.5/2.85
72.5/2.85
RM35AT••MW
35/1.38
2.8
0.11
90/3.54
72/2.83
12 11 14 22 21 24
76/2.99
76/2.99
76/2.99
72.5/2.85
23-52
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
ABL8, ABL7, ABL1
Power Supplies
Refer to Catalog DIA3ED207041EN-US
schneider-electric.us
Phaseo™ DC Power Supply
For use with Universal power supplies, see optional function modules in catalog
DIA3ED207041EN-US, which offer a set of solutions to meet the needs for continuity of
service such as:
• Immunity to microbreaks
• Voltage holding during power outages
• Voltage holding during power supply equipment failure
Table 23.162: Modular, Single Phase
Input
Voltage (Vac)
ABL8MEM12020
Output
Voltage (Vdc)
5
12
ABL8REM24030
100–240
24
Nominal
Current (I)
4
2
0.3
0.6
1.2
2.5
Protection Reset
Catalog Number
Auto
ABL8MEM05040
ABL8MEM12020
ABL8MEM24003
ABL8MEM24006
ABL8MEM24012
ABL7RM24025
Protection Reset
Catalog Number
Auto
ABL7RP1205
ABL8REM24030
ABL8REM24050
ABL7RP4803
Auto-Protection
Reset
Catalog Number
RELAYS AND TIMERS
Phaseo switch mode power supplies are totally electronic and their output voltage is
regulated. They offer:
• Compact size
• High degree of output voltage stability
Input Voltage (Vac)
Output Voltage
(Vdc)
12
100–240
24
48
Nominal
Current (I)
5
3
5
2.5
23
Table 23.163: Optimum, Single Phase
Table 23.164: Universal, Single Phase
Input
Voltage (Vac)
Output
Voltage (Vdc)
100–120 /
200–500
24
100–120 /
200–240
Nominal
Current (I)
3
5
10
ABL8RPS24030
ABL8RPS24050
ABL8RPS24100
Auto/Manual
20
ABL8RPM24200
Table 23.165: Universal, Three Phase
ABL8RPS24100
ABL8WPS24200
Input Voltage (Vac)
Output Voltage
(Vdc)
380–500
24
100–240[1]
ABL1RPM24100
Auto-Protection
Reset
Catalog Number
Auto/Manual
ABL8WPS24200
ABL8WPS24400
Protection Reset
Catalog Number
Table 23.166: Dedicated, Single Phase
Input Voltage (Vac)
ABL1RPM24042
Nominal
Current (I)
20
40
Output Voltage
(Vdc)
12
24
100–120 / 200–240
[2]
24
100–240[1]
12
24
100–120 / 200–240
[2]
24
Nominal
Current (I)
5
2.5
4.2
6.2
10
8.3
4.2
6.2
10
Auto
Auto
ABL1REM12050
ABL1REM24025
ABL1REM24042
ABL1REM24062
ABL1REM24100
ABL1RPM12083
ABL1RPM24042
ABL1RPM24062
ABL1RPM24100
Approvals for Phaseo DC Power Supply
File:
E164867
CCN:
NMTR,
NMTR7
•
•
[1]
[2]
File:
E164867
CCN:
NMTR2,
NMTR8
File:
238438
Class:
5311-87,
5311-07
RoHS
Compliant
SEMI F47 Compliant for most units
For additional information, refer to Catalog DIA3ED207041EN-US.
Compatible input voltage 120-370 Vdc not indicated on the product.
Compatible input voltage 180-370 Vdc not indicated on the product.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-53
Interface Modules
RMT, RMP, RMC
Refer to Catalog 8501CT0502
schneider-electric.us
Zelio™ Analog Interface Modules
The Zelio Analog range of converters is designed to convert signals emitted by sensors
or electrical measurement devices into standard electrical signals that are compatible
with automation platforms and controllers. They also allow the connection distance
between a sensor and a measurement device to be increased, for example, between a
thermocouple and a programmable controller
23
Table 23.167: Converters for Type J and K thermocouples—supply voltage 24 Vdc
± 20%, non-isolated
Temperature Range
°F
°C
32–302
0–150
32–572
0–300
32–1112
0–600
32–1112
0–600
32–2192
0–1200
Type
Type J
RELAYS AND TIMERS
Type K
Switchable Output Signals
Catalog Number
0–10 V, 0–20 mA, 4–20 mA
0–10 V, 0–20 mA, 4–20 mA
0–10 V, 0–20 mA, 4–20 mA
0–10 V, 0–20 mA, 4–20 mA
0–10 V, 0–20 mA, 4–20 mA
RMTJ40BD
RMTJ60BD
RMTJ80BD
RMTK80BD
RMTK90BD
Table 23.168: Converters for Universal Pt100 probes—supply voltage 24 Vdc ±
20%, non-isolated
Type
RMTJ40BD
RMTK90BD
Pt100
2-wire, 3-wire, and
4-wire
Temperature Range
°F
°C
- 40–104
- 40–40
- 148–212
- 100–100
32–212
0–100
32–482
0–250
32–932
0–500
Switchable Output Signals
Catalog Number
0–10 V, 0–20 mA, 4–20 mA
0–10 V, 0–20 mA, 4–20 mA
0–10 V, 0–20 mA, 4–20 mA
0–10 V, 0–20 mA, 4–20 mA
0–10 V, 0–20 mA, 4–20 mA
RMPT10BD
RMPT20BD
RMPT30BD
RMPT50BD
RMPT70BD
Table 23.169: Converters for Optimum Pt100 probes[1]—supply voltage 24 Vdc ±
20%, non-isolated
Type
Pt100
2-wire, 3-wire, and
4-wire
Temperature Range
°F
°C
- 40–104
- 40–40
- 148–212
- 100–100
32–212
0–100
32–482
0–250
32–932
0–500
Switchable Output Signals
Catalog Number
0–10 V or 4–20 mA
0–10 V or 4–20 mA
0–10 V or 4–20 mA
0–10 V or 4–20 mA
0–10 V or 4–20 mA
RMPT13BD
RMPT23BD
RMPT33BD
RMPT53BD
RMPT73BD
Table 23.170: Universal Voltage/Current Converters
Type
Supply voltage 24
Vdc ± 20%, nonisolated
RMPT70BD
RMPT13BD
Supply voltage 24
Vdc ± 20%, isolated
Input Signal
0–10 V or 4–20 mA
0–10 V, ± 10 V,
0–20 mA, 4–20 mA
0–50 V, 0–300 V, 0–500 V
DC or AC, 50/60 Hz
0–1.5 A, 0–5 A, 0–15 A
DC or AC, 50/60 Hz
Output Signal
Catalog Number
0–10 V or 4–20 mA
RMCN22BD
Switchable:
0–10 V, ± 10 V,
0–20 mA, 4–20 mA
Switchable:
0–10 V, 0–20 mA, 4–20 mA
RMCV60BD
0–10 V, 0–20 mA, 4–20 mA
RMCA61BD
RMCL55BD
Approvals for Zelio Analog Interface Modules
File: E164353
CCN: NKCR
Table 23.171: How to Order
•
To Order Specify:
Catalog Number
File: 044087_S_000
Class: 3211 07
IEC
60947-1
RoHS
Compliant
Catalog Number
RMCN22BD
RMCN22BD
[1]
Converters dedicated to Zelio Logic smart relays.
23-54
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
ABS
Interface Modules
Refer to Catalog DIA3ED2090304EN-US
schneider-electric.us
Solid State Interface Modules
ABS solid state relay interface modules are for discrete digital input or output control
signals exchanged in automated equipment. Features include:
• High operating rate
• 5 separate character places for marking
• Silent operation
• LED indication of the control signal state
• 35 mm DIN 3 or 32 mm DIN 1 track mountable
Min./Max. Voltage
Min./Max. Switching
Current
Rated Insulation Voltage
Approvals
2/60 Vdc
2/60 Vdc
2/60 Vdc
2/60 Vdc
2/60 Vdc
1/50 mA
1/50 mA
1/50 mA
1/50 mA
1/50 mA
Conforming to IEC 60947-1: 300 V
Conforming to IEC 0110: 250 V group C
UL E164353, CSA 044087_S_000, IEC 60947-1
23
ABS2EA02EM
Input Module Catalog Number
Input Module Catalog
ABS2EC01EA
ABS2EC01EB
ABS2EC01EE ABS2EA02EF ABS2EA02EM
No.
Dimensions (WxDxH)[2]
Inches: 0.37 x 2.78 x 2.91
mm: 9.5 x 70.5 x 74
Control Circuit Characteristics
Rated Voltage US
5 Vdc
24 Vdc
48 Vdc
120/127 60Hz 230/240 60Hz
Maximum Voltage
6 (TTL)
28.8 Vdc
57.6 Vdc
140 Vac
264 Vac
Maximum Current at Us
13.6 mA
12 mA
10.5 mA
17 mA
15 mA
Internal Protection
Yes
Yes
Yes
N/A
N/A
Against Reverse Polarity
Output Circuit Characteristics
Rated Operational
5 to 48 Vdc
5 to 48 Vdc
5 to 48 Vdc
5 to 48 Vdc
5 to 48 Vdc
Voltage Ve
Table 23.173: Solid State Interface Output Modules
ABS2SA01MB
Dimensions (W x D x H) [2]
Control Circuit Characteristics
Rated Voltage Us
Maximum Voltage
Maximum Current at Us
Internal Protection
against reverse polarity
Output Circuit Characteristics
Rated Operational Voltage Ve
Maximum Voltage
Internal Protection against reverse
polarity
External Protection
Rated insulation voltage
Approvals
•
•
[2]
Output Module Catalog Number
—
ABS2SC01EB
—
—
—
ABS2SC02EB
—
—
—
—
—
ABS2SA01MB
ABS2SA02MB
—
—
—
Inches: 0.69 x 2.78 x 2.91
mm: 17.5 x 70.5 x 74
24 Vdc
28.8 Vdc
12 mA
24 Vdc
28.8 Vdc
12 mA
24 Vdc
28.8 Vdc
13.6 mA
24 Vdc
28.8 Vdc
13.6 mA
Yes
Yes
Yes
Yes
5 to 48 Vdc
57.6 Vdc
5 to 48 Vdc
57.6 Vdc
24 to 240 Vac
264 Vac
24 to 240 Vac
264 Vac
Yes
Yes
Yes
Yes
3.15 A external fuse fast blow
(Ik <= 1 kA AC and Ik <= 100 A DC)
Conforming to IEC 60947-1: 300 V
Conforming to VDE 0110: 250 V group C
UL E164353, CSA 044087_S_000, IEC 60947-1
For Mounting Track, see Mounting Track, End Clamps, Jumpers, Fanning Strips, page
24-19.
Table 23.174: How to Order
To Order Specify:
Catalog Number
Catalog Number
ABS2EC01EA
Dimensions mounted on DIN 3 (7.5 mm high) track.
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
RELAYS AND TIMERS
Table 23.172: Solid State Interface Input Modules
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
23-55
ABR
Interface Modules
Refer to Catalog DIA3ED2090304EN-US
schneider-electric.us
Electromechanical Interface Modules
ABR electromechanical relay modules are for discrete digital input or output control
signals exchanged in automated equipment. Features include:
23
•
•
•
•
High contact reliability
LED indication of the control signal state
5 separate character places for marking
35 mm DIN 3 or 32 mm DIN 1 track
mountable
Table 23.175: Input Modules
Coil Voltage
RELAYS AND TIMERS
ABR1E411F
Options
24 Vac/Vdc
48 Vac/Vdc
110–125 Vdc
110–127 Vac 50/60 Hz
230–240 Vac 50/60 Hz
230–240 Vac 50/60 Hz
24 Vdc
48 Vdc
120–127 Vac 60 Hz
230–240 Vac 50/60 Hz
24 Vdc
Manual Operator and LED
Indication
Manual Operator
LED Indication
1 N.O. Contact
Catalog Number
ABR1E118B[3]
ABR1E118E[3]
ABR1E112F[3]
ABR1E111F[3]
ABR1E111M[3]
ABR1E101M[3]
ABR2E112B
ABR2E112E
ABR2E116F
ABR2E111M
—
1 C.O. Contact
Catalog Number
ABR1E318B[3]
ABR1E318E[3]
ABR1E312F[3]
ABR1E311F[3]
ABR1E311M[3]
ABR1E301M[3]
—
—
—
—
ABR2EB312B
2 N.O. Contacts
Catalog Number
ABR1E418B[3]
ABR1E418E[3]
ABR1E412F[3]
ABR1E411F[3]
ABR1E411M[3]
—
—
—
—
—
—
Table 23.176: Output Modules
Coil Voltage
Options
Manual
Operator
24 Vdc
ABR2E112E
24 Vac/Vdc
48 Vac/Vdc
1 N.O. Contact
1 C.O. Contact
Catalog
Number
Catalog
Number
2 N.O.
Contacts
Catalog
Number
ABR1S102B[3]
ABR1S302B[3]
ABR1S402B[3]
ABR1S602B[3]
ABR1S118B[3]
ABR1S118E[3]
ABR1S318B[3]
ABR1S318E[3]
ABR1S418B[3]
ABR1S418E[3]
ABR1S111F[3]
ABR1S311F[3]
ABR1S411F[3]
ABR2S112B
—
ABR2S102B
—
ABR2SB312B
—
—
—
—
ABR1S618B[3]
ABR1S618E[3]
ABR1S611F
[3]
—
—
—
Manual
Operator and
LED Indication
110–127 Vac 50/60 Hz
24 Vdc
48 Vdc
24 Vdc
LED Indication
—
1 N.C. & 1 N.O.
Contact
Catalog Number
Table 23.177: Coil Data: ABR1E, ABR2E
Relay
ABR1S111F
ABR1E
48
127
Vac/Vdc
Vdc
53
137
38
97
Coil Voltage Ue
V
Maximum Voltage
Pick-up Voltage
Minimum Sealed
Current
Maximum Sealed
Current
V
V
24
Vac/Vdc
30
17
mA
5.2
5.4
mA
62
36
ABR2E
127
Vac
56
140
37.3
97
127
Vac
140
93
240
Vac
255
195
24
Vdc
28.8
16.9
240
Vac
264
186
1.5
2.4
2
2
2
2.5
2.5
15
8
7
19.5
11
16
15
48 Vdc
Table 23.178: Coil Data: ABR2EB, ABR1S, ABR2S, ABR2SB
Relay
ABR2EB
5.4
2.4
2
2
2
62
36
8
28
17
29
2
6.6
mA
29
62
Maximum Voltage
Pick-up Voltage
Minimum Sealed
Current
Maximum Sealed
Current
V
V
ABR2SB
6.2
mA
24 Vdc
ABR2S
53
38
28.8
16.9
24
Vdc
30
17
V
ABR1S
127
Vac
140
83
24
Vdc
30
17
Coil Voltage Ue
48 Vac/Vdc
24
24
24
28.8
16.9
28.8
16.9
28.8
16.9
Table 23.179: Contact Ratings
ABR2S102B
Relay
Rated Voltage Ue
Rated Voltage Ue
Thermal Current Ith
Break Rating (AC14)
Break Rating (DC13)
Vac
Vdc
A
A
A
Table 23.180: Dimensions
Modules
ABR1E, ABR2EB, ABR2SB
ABR2E
ABR2S1
ABR1E, ABR2E
ABR1S, ABR2S
•
[3]
[4]
ABR1E
250
125
2
1
1
ABR2E
115
100
1
0.5
1
ABR2EB
48
48
0.05
1
1
ABR1S
250
125
5
1
1
ABR2S
230
120
5
1
1.5
ABR2SB
48
48
0.05
—
—
Approximate Dimensions (WxDxH)[4]
In.
mm
0.69 x 2.91 x 2.78
17.5 x 74 x 70.5
0.37 x 2.91 x 2.78
9.5 x 74 x 70.5
0.47 x 2.91 x 2.78
12 x 74 x 70.5
Approvals
UL E164353, CSA 044087_S_000, IEC 60947-1
UL E164353, CSA 044087_S_000, IEC 60947-1
ABR1 relays are RoHS compliant.
•
For Mounting Track, see page 24-19.
RoHS Compliant
Dimensions mounted on DIN 3 (7.5 mm high) track.
23-56
© 2016 Schneider Electric
All Rights Reserved
3/24/2016
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement