Capital CLEANING & MAINTENANCE Instruction manual

CASSETTE FIRES
LUX and SLE
CLEANING
NOTE: Allow the fire to completely cool before cleaning it.
1. Switch off and unplug from the power supply before cleaning.
2. Using a soft, dry cloth, carefully clean the exterior surface of the product.
3. Do not allow water or other liquids to run into the interior of the product, as this is a
hazard.
4. Lightly run a vacuum cleaner nozzle over the grilles along the control panel to
remove any dust or dirt that may have accumulated inside or on the unit.
CAUTION: Do not use harsh detergents, chemical cleaners or solvents as they may damage
the surface finish of the plastic components
SERVICING AND MAINTENANCE



There are no user-serviceable components to this appliance – do not attempt to
service the appliance. If there are issues that cannot be resolved with your appliance,
then please contact your retailer.
Hard floor coverings in particular, but all floor coverings cause fluff that can be drawn
into the air intakes. From time-to-time and no less than every two months, isolate the
fire from the mains and attach the brush accessory to your vacuum cleaner and
gently vacuum the air intakes and outlets. (See image below)
Use only a clean dry duster to clean the surfaces of the appliance. DO NOT use
water, abrasive cleaners, steam or other household insutrial products or cleaners.
Video Cleaning Links:
etronic 560 / etronic 800 / etronic 1500
LUX Cassette Fires
Tamarin
TrueFlame Cassette Fires