Automotive Data Solutions Inc.
VW6
INSTALL GUIDE
BLADE-AL(DL)-VW6-EN
AVAILABLE FOR : ADS-BLADE AL
Rev. Date: November 19, 2020
Doc. No.: ##72757##
PATENT NO. US 8,856,780 CA 2759622
PLEASE VISIT WWW.IDATALINK.COM FOR COMPLETE PRODUCT DETAILS
The brand names and logos found in this guide are property of their respective owners. Automotive Data Solutions Inc. © 2020
TERMS OF USE: Automotive data Solutions inc. (“AdS”) products are strictly intended for installation by Certified Technicians who are
employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning
installation of an AdS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, install
Guide and vehicle-specific notes available in Weblink®. AdS is not responsible for any damages whatsoever, including but not limited
to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of
economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its
products. Purchasers sole contractual remedy is refund of the purchase price of the AdS product(s). AdS reserves itself the right to
suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified
Technicians or end users.
Doorlock Interface
INSTALL GUIDE
Audi
Patent No. US 8,856,780 CA 2759622
BLADE-AL(DL)-VW6-EN
Page 2 of 7
20201119
Doc. No.: ##72757##
INSTALL TYPE SELECTION
MoDel
Year
InStall tYPe
SecUre takeoVer
3X lock reMote Start
a/M rS ctrl froM oeM reMoteS
a/M alarM ctrl froM oeM reMoteS
arM oeM alarM
DISarM oeM alarM
Door lock
Door Unlock
trUnk/HatcH releaSe
Door StatUS oUtPUt
trUnk StatUS oUtPUt
HooD StatUS oUtPUt*
aUtolIGHt ctrl
tacHoMeter oUtPUt
Brake PeDal StatUS oUtPUt
e-Brake oUtPUt
aUDI
Make
featUreS
A6 PTS AT
12-18 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A6 TDI PTS AT
12-18 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A7 PTS AT
12-18 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A7 TDI PTS AT
12-18 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A8 PTS AT
11-18 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A8 TDI PTS AT
11-18 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RS7 PTS AT
14-18 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
S6 PTS AT
13-18 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
S7 PTS AT
13-18 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
13-18 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
S8 PTS AT
*Available only if vehicle is equipped with factory hood switch.
WWW.IDATALINK.COM
Automotive Data Solutions Inc. © 2020
Doorlock Interface
INSTALL GUIDE
Audi
Patent No. US 8,856,780 CA 2759622
BLADE-AL(DL)-VW6-EN
Page 3 of 7
Doc. No.: ##72757##
20201119
WIre
color
PolarItY
MoDUle
locatIon
coMPonent
locator
~
~
~
Red
(+)
Behind fuse box
~
~
04 pin
03 Red/Black
(+)
At brake switch
~
CanH
~
~
~
~
Orange/LtGreen
(DATA)
Twisted wires in door harness in driver kick panel
~
~
~
~
~
Orange/Brown
(DATA)
Twisted wires in door harness in driver kick panel
~
OBDII Black
16 pin
01 Black /Blue
(+)
OBDII connector
~
~
Black
06 pin
05 Black/Red
(-)
Push-button
~
PTS 2
~
Black
06 pin
06 Blue
(-)
Push-button
~
PTS 3
~
Black
06 pin
03 Black
(-)
Push-button
~
12V
~
~
~
~
Red
(+)
Behind fuse box
~
Brake
~
~
04 pin
03 Red/Black
(+)
At brake switch
~
CanH
~
~
~
~
Orange/LtGreen
(DATA)
Twisted wires in door harness in driver kick panel
~
~
~
~
~
Orange/Brown
(DATA)
Twisted wires in door harness in driver kick panel
~
OBDII Black
16 pin
01 Black /Blue
(+)
OBDII connector
~
~
Black
06 pin
05 Black/Red
(-)
Push-button
~
PTS 2
~
Black
06 pin
06 Blue
(-)
Push-button
~
PTS 3
~
Black
06 pin
03 Black
(-)
Push-button
~
12V
~
~
~
~
(+)
Behind fuse box
~
Brake
~
~
04 pin
03 Black /Green
(+)
At brake switch
~
CanH
~
~
~
~
Orange/LtGreen
(DATA)
Twisted wires in door harness in driver kick panel
~
~
~
Orange/Brown
aUDI
A6 PTS AT
12-18 CanL
A6 TDI PTS AT 12-18
S6 PTS AT
13-18 Ignition
PTS 1
A7 PTS AT
A7 TDI PTS AT
S7 PTS AT
RS7 PTS AT
12-18
12-18 CanL
13-18 Ignition
14-18
PTS 1
A8 PTS AT
11-18 CanL
A8 TDI PTS AT 11-18
S8 PTS AT
13-18 Ignition
PTS 1
connector
tYPe
~
~
connector
color
12V
Brake
connector
naMe
PoSItIon
WIre
DeScrIPtIon
Year
MoDel
Make
TYPE 1 - WIRE CROSS REFERENCE CHART - 1 OF 1
Red
~
~
(DATA)
Twisted wires in door harness in driver kick panel
~
OBDII Black
16 pin
01 Blue/Orange
(+)
OBDII connector
~
~
Black
06 pin
05 Black/Red
(-)
Push-button
~
PTS 2
~
Black
06 pin
06 Black/Gray
(-)
Push-button
~
PTS 3
~
Black
06 pin
03 Blue/White
(-)
Push-button
~
WWW.IDATALINK.COM
Automotive Data Solutions Inc. © 2020
Doorlock Interface
INSTALL GUIDE
Audi
Patent No. US 8,856,780 CA 2759622
BLADE-AL(DL)-VW6-EN
Page 4 of 7
Doc. No.: ##72757##
20201119
TYPE 1 - WIRING DIAGRAM - 1 OF 1
12
10 LOOPS (30 AWG)
AROUND KEYFOB
REMOVE BATTERY
V
)
(+
BRAKE SWITCH
BLACK CONNECTOR
4 3 2 1
86
85
87A
)
(+
WARNING:
DO NOT CONNECT ANY OTHER
ACCESSORY,IGNITION OR START WIRE
FROM THE REMOTE STARTER TO THE
VEHICLE. THE INTERFACE MODULE
IS HANDLING THE REQUIRED VEHICLE
POWER AND START SEQUENCE FROM
THE PUSH TO START BUTTON CIRCUIT.
E
AK
BR
87
10 LOOPS (30 AWG)
ON KEY READER
(BEHIND KEY SYMBOL,
BEHIND PANEL)
1N4001
DIODE
30
REMOTE STARTER
TWO KEYS ARE REQUIRED FOR THIS INSTALLATION.
ONE KEY WILL REMAIN PERMANENTLY IN THE VEHICLE.
THE OTHER KEY WILL BE USED FOR THE PROGRAMMING
PROCEDURE. IT WILL THEN BE RETURNED TO THE OWNER.
DIODE
IGNITION (+) INPUT/OUTPUT
*BLADE CONNECTOR
EXACT PIN-OUT
WHITE/RED
10 20
WHITE/BLACK
WHITE
09 19
NO WIRE
PINK/BLACK
08 18
PINK
NO WIRE
07 17
BLACK
BROWN/RED
06 16
BROWN/YELLOW
ORANGE/BLACK
05 15
ORANGE/WHITE
ORANGE
04 14
NO WIRE
BLUE/RED
03 13
BLUE/YELLOW
GREEN/RED
02 12
YELLOW
GRAY/RED
01 11
GRAY/YELLOW
1N4001
WHITE/BLACK
WHITE/RED
WHITE - 12V (+) CONSTANT
YELLOW (NC)
BROWN/RED - CANH
BROWN/YELLOW - CANL
ORANGE/BLACK - PTS 1 (-) OUTPUT
ORANGE/WHITE (NC)
ORANGE (NC)
PINK/BLACK (NC)
PINK - IGNITION (+) INPUT
BLUE/RED (NC)
BLUE/YELLOW (NC)
GREEN/RED - PTS 2 (-) OUTPUT
GRAY/RED - PTS 3 (-) OUTPUT
GRAY/YELLOW (NC)
BLACK (NC)
PTS
CONNECTOR
6
7
8
9
10
11
12
13
14
15
16
ON
I
IT
3
5
N
IG
2
6
4
TWISTED WIRES
IN DOOR HARNESS,
IN DRIVER KICK PANEL
)
3
PT
S
PT
(+
)
(-
5
3
1
1
2
S
PT
4
1
CA
CA NL
NH
OBDII CONNECTOR
2
)
(-
S
)
(-
WWW.IDATALINK.COM
Automotive Data Solutions Inc. © 2020
Doorlock Interface
INSTALL GUIDE
Audi
Patent No. US 8,856,780 CA 2759622
BLADE-AL(DL)-VW6-EN
Page 5 of 7
Doc. No.: ##72757##
20201119
CARTRIDGE INSTALLATION
1
Slide cartridge into unit. Notice
button under LED.
2
Ready for Module Programming
Procedure.
MODULE PROGRAMMING PROCEDURE
1
OFF
ACC
ON START
Turn ignition to ON position.
3
WWW.IDATALINK.COM
ACC
ON START
Turn ignition to OFF position.
ENGINE
START
STOP
ENGINE
START
STOP
2
OFF
Wait, LED will turn solid BLUE
for 2 seconds.
4
Module Programming
Procedure completed.
Automotive Data Solutions Inc. © 2020
XX-XX
PATENT
INSTALL GUIDE
PAGE X-X
Doorlock Interface
Audi
Patent No. US 8,856,780 CA 2759622
BLADE-AL(DL)-VW6-EN
Page 6 of 7
Doc. No.: ##72757##
20201119
IDENTIFY VEHICLE
NOTICE YEAR
1
Locate the Vehicle Identification Number (VIN), identify the 10th
character then match it to its corresponding year.
Æ
43A5Y1N5TAL8D5R0X
Æ
a
Y
1980
1980 l l 19901990
Y
2000
a
2000
2010a l 2010
2020
B
1
1981
1981 M M19911991
1
2001
B
2001
2011B M 2011
2021
c
2
1982
1982 n n19921992
2
2002
c
2002
2012 c n 2012
2022
D
3
1983
1983 P P 19931993
3
2003
D
2003
2013D P 2013
2023
e
4
1984
1984 r r19941994
4
2004
e
2004
2014 e r 2014
2024
f
5
1985
1985 S S 19951995
5
2005
f
2005
2015 f S 2015
2025
G
6
1986
1986 t t 19961996
6
2006
G
2006
2016G t 2016
2026
H
7
1987
1987 V V 19971997
7
2007
H
2007
2017H V 2017
2027
J
8
1988
1988 W W19981998
8
2008
J
2008
2018 J W 2018
2028
k
9
1989
1989 X X 19991999
9
2009
k
2009
2019k X 2019
2029
MODULE DIAGNOSTICS
leD StatUS
DIaGnoStIcS
DUrInG ProGraMMInG
DUrInG reMote Start
WItH IGnItIon off
Flashing RED
Missing/wrong information from
firmware or vehicle
Incorrectly programmed
Incorrectly programmed or connected
Solid RED
Waiting for more vehicle information
Incorrectly programmed
Not programmed waiting for more
vehicle information
Flashing BLUE
Additional steps required to complete
programming
Correctly programmed and
operational
False ground when running status
from remote starter
Solid BLUE then OFF
Correctly programmed
Reset in progress
Reset in progress
OFF
No activity or already programmed
Invalid ground when running status
from remote starter
At rest and ready for a remote start
sequence
FACTORY RESET PROCEDURE
1
2
DISCONNECT cartridge from
remote starter.
PRESS AND HOLD programming
button while re-connecting
cartridge to remote starter.
3
LED will flash red. Immediately
RELEASE programming button.
4
LED will turn solid red for 2
seconds.
RESET COMPLETED.
5
RECONNECT all connectors.
Repeat programming procedure.
!
WWW.IDATALINK.COM
Failure to follow procedure may result with a DTC or a
CHECK ENGINE error message.
Automotive Data Solutions Inc. © 2020
Doorlock Interface
INSTALL GUIDE
Audi
Patent No. US 8,856,780 CA 2759622
BLADE-AL(DL)-VW6-EN
Page 7 of 7
Doc. No.: ##72757##
20201119
WARNING: READ BEFORE REMOTE
NOTICESTARTING THE VEHICLE
IMPORTANT
I
All vehicle doors must be closed and locked prior to remote start sequence. Failure to comply will result in remote starter malfunction.
TAKE OVER PROCEDURE - PTS - TO THE VEHICLE OWNER
2
NOTE
I
TIME RESTRICTIºN
Within 45 SECONDS from
previous step:
All vehicle doors must be closed and locked prior to remote
start sequence.
È
Open vehicle door.
Enter vehicle.
Close vehicle door.
TIME RESTRICTIºN COMING UP !
1
Press and release BRAKE pedal.
Unlock vehicle door using OEM
or after-market remote.
3
Take over procedure completed.
!
WWW.IDATALINK.COM
Failure to follow procedure will result in vehicle engine
shutdown.
Automotive Data Solutions Inc. © 2020
">