Automotive Data Solutions ORB-AL(RS)-VW2-[ADS-ALCA] Audi S5 2008 Installation Guide
Automotive Data Solutions ORB-AL(RS)-VW2-[ADS-ALCA] is a remote starter module designed for specific Audi vehicles. This device allows you to start your car remotely from your key fob, providing convenience and comfort. With the ORB-AL(RS)-VW2-[ADS-ALCA], you can pre-heat or cool your car before entering, ensuring a comfortable temperature. The module also includes features such as secure takeover, allowing you to transition to a manual drive after a remote start, and various vehicle control options, such as door lock/unlock, trunk release, and more.
PDF
Download
Document
Advertisement
Advertisement
INSTALL GUIDE ORB-AL(RS)-VW2-[ADS-ALCA]-EN DOCUMENT NUMBER 84076 REVISION DATE 20231127 FIRMWARE ORB-AL(RS)-VW2-[ADS-ALCA] HARDWARE ADS-ALCA ACCESSORIES ADS-USB (REQUIRED) COMPATIBLE RF-KIT (OPTIONAL) TERMS OF USE: Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 BEFORE INSTALLATION 1- Connect module to computer 2- Login to Weblink account 3- Flash firmware to module (module is not preloaded with firmware) 4- Use accessories accordingly (accessories are sold separately) www.idatalink.com PAGE 2 OF 19 VEHICLE LIST - 1 OF 1 DOC.: #84076 • 20231127 FEATURES NOTE MODEL YEAR INSTALL TYPE SECURE TAKEOVER 3X LOCK START/STANDALONE MOD. ARM OEM ALARM DISARM OEM ALARM DOOR LOCK DOOR UNLOCK TRUNK/HATCH RELEASE DOOR STATUS OUTPUT TRUNK STATUS OUTPUT HOOD STATUS OUTPUT* AUTOLIGHT CTRL TACHOMETER OUTPUT BRAKE PEDAL STATUS OUTPUT E-BRAKE OUTPUT AUDI MAKE I Warning: Install type 1 supports idle mode. Install type 2 does NOT support idle mode. A4 Keyport with PTS AT 08-16 1 • • • • • • • • • • • • • • A4 Keyport without PTS AT 08-16 2 • • • • • • • • • • • • • • A4 Allroad Keyport with PTS AT 08-16 1 • • • • • • • • • • • • • • A4 Allroad Keyport without PTS AT 08-16 2 • • • • • • • • • • • • • • A5 Keyport with PTS AT 08-16 1 • • • • • • • • • • • • • • A5 Keyport without PTS AT 08-16 2 • • • • • • • • • • • • • • Q5 Keyport with PTS AT 09-17 1 • • • • • • • • • • • • • • Q5 Keyport without PTS AT 09-17 2 • • • • • • • • • • • • • • Q5 TDI Keyport with PTS AT 09-17 1 • • • • • • • • • • • • • • Q5 TDI Keyport without PTS AT 09-17 2 • • • • • • • • • • • • • • RS5 Keyport with PTS AT 08-16 1 • • • • • • • • • • • • • • RS5 Keyport without PTS AT 08-16 2 • • • • • • • • • • • • • • S4 Keyport with PTS AT 08-16 1 • • • • • • • • • • • • • • S4 Keyport without PTS AT 08-16 2 • • • • • • • • • • • • • • S5 Keyport with PTS AT 08-16 1 • • • • • • • • • • • • • • S5 Keyport without PTS AT 08-16 2 • • • • • • • • • • • • • • SQ5 Keyport with PTS AT 09-17 1 • • • • • • • • • • • • • • 09-17 2 • • • • • • • • • • • • • • SQ5 Keyport without PTS AT *Available only if vehicle is equipped with factory hood switch. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com PAGE 3 OF 19 BOX CONTENTS - 1 OF 1 DOC.: #84076 • 20231127 BOX CONTENTS WHITE WHITE 4 PIN BLACK CONNECTOR 6 PIN WHITE CONNECTOR MODULE 1 2 3 4 5 6 1 2 3 4 5 6 7 WHITE 1 2 3 BLUE 1 2 3 PROGRAMMING BUTTON 10 PIN BLACK CONNECTOR 7 PIN WHITE CONNECTOR LED 1 A B F C E D 10 9 8 7 6 5 4 3 2 1 4 3 2 1 BLACK 3 PIN WHITE CONNECTOR DATA CABLE 1 3 PIN BLUE CONNECTOR DATA CABLE 2 BLACK DATA PORT (WEBLINK, RF, TELEMATIC) WEBLINK CABLE (required accessory sold separately) WEBLINK CABLE MODULE DATA PORT COMPUTER USB PORT 4 PIN BLACK CABLE Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com PAGE 4 OF 19 COMPATIBLE ACCESSORIES - 1 OF 1 DOC.: #84076 • 20231127 RF KIT (accessories sold separately) RF KIT FLASH RF DECODER BEFORE INSTALLATION 5 AMPS 12V (+) RED BLACK BLUE MODULE DATA PORT BLACK BLUE CABLE Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 RF DECODER BLACK CABLE ORB-AL(RS)-VW2-[ADS-ALCA]-EN ANTENNA www.idatalink.com PAGE 5 OF 19 TECHNICAL NOTE - 1 OF 1 DOC.: #84076 • 20231127 IMPORTANT STARTER WIRE CONNECTION FOR VEHICLES WITH AUTOMATIC TRANSMISSION. Black connector at brake switch under the dashboard, near the brake pedal. At the ECU under the wiper cowl, located under the hood, in the engine compartement. (IF PRESENT) 1 2 3 4 OR Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 STARTER (+) FROM RS ORB-AL(RS)-VW2-[ADS-ALCA]-EN K AC ) BL (+ D/ E RE RAK B K AC ) BL (+ D/ E RE RAK B STARTER (+) FROM RS www.idatalink.com PAGE 6 OF 19 AUDI A5 Keyport with PTS AT RS5 Keyport with PTS AT S5 Keyport with PTS AT Q5 Keyport with PTS AT Q5 TDI Keyport with PTS AT SQ5 Keyport with PTS AT Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 08-16 08-16 09-17 WIRE COLOR MODULE LOCATION COMPONENT LOCATOR ~ ~ ~ Red/Black (+) Behind fuse box ~ ~ ~ 04 pin 02 Red/Black (+) At brake switch ~ CanH ~ ~ ~ ~ (DATA) Twisted wires in door harness in driver kick panel ~ Orange/LtGreen POLARITY POSITION ~ CONNECTOR TYPE 12V Brake CONNECTOR COLOR CONNECTOR NAME DOC.: #84076 • 20231127 WIRE DESCRIPTION A4 Keyport with PTS AT A4 Allroad Keyport with PTS AT S4 Keyport with PTS AT YEAR MODEL MAKE TYPE 1 - WIRE CHART - 1 OF 1 CanL ~ ~ ~ ~ Orange/Brown (DATA) Twisted wires in door harness in driver kick panel ~ Ignition ~ ~ ~ ~ Black (+) Behind fusebox ~ PTS 1 ~ ~ 04 pin 03 Blue/Yellow (-) Push-button ~ PTS 2 ~ ~ 04 pin 04 Blue/White (-) Push-button ~ Keysense ~ ~ 16 pin 05 Black/Yellow (-) Behind keyport ~ 12V ~ ~ ~ ~ Red/Black (+) Behind fuse box ~ Brake ~ ~ 04 pin 03 Red/Black (+) At brake switch ~ CanH ~ ~ ~ ~ Orange/LtGreen (DATA) Twisted wires in door harness in driver kick panel ~ CanL ~ ~ ~ ~ Orange/Brown (DATA) Twisted wires in door harness in driver kick panel ~ Ignition ~ ~ ~ ~ Black (+) Behind fusebox ~ PTS 1 ~ ~ 04 pin 03 Blue/Yellow (-) Push-button ~ PTS 2 ~ ~ 04 pin 04 Blue/White (-) Push-button ~ Keysense ~ ~ 16 pin 05 Black/Yellow (-) Behind keyport ~ ~ 12V ~ ~ ~ ~ Red/Black (+) Behind fuse box Brake ~ ~ 04 pin 03 Red/Black (+) At brake switch ~ CanH ~ ~ ~ ~ (DATA) Twisted wires in door harness in driver kick panel ~ Orange/LtGreen CanL ~ ~ ~ ~ Orange/Brown (DATA) Twisted wires in door harness in driver kick panel ~ Ignition ~ ~ ~ ~ Black (+) Behind fusebox ~ PTS 1 ~ ~ 04 pin 03 Blue/Yellow (-) Push-button ~ PTS 2 ~ ~ 04 pin 04 Blue/White (-) Push-button ~ Keysense ~ ~ 16 pin 05 Black/Yellow (-) Behind keyport ~ ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com PAGE 7 OF 19 TYPE 1 - WIRING DIAGRAM - 1 OF 1 DOC.: #84076 • 20231127 PTS SWITCH M1 M2 PTS 1 (-) - 03 M6 M3 M4 PTS 2 (-) - 04 M5 DATA M1 01 GRAY/YELLOW (NC) 02 GRAY/RED (NC) 03 GREEN/YELLOW (NC) 04 GREEN/RED - PTS 2 (-) OUTPUT 05 BLUE/YELLOW (NC) 06 BLUE/RED (NC) CANL CANH 1 2 3 4 DOOR HARNESS IN DRIVER KICK PANEL TWISTED WIRES BEHIND FUSE BOX IGNITION (+) M2 01 PINK - IGNITION (+) INPUT 02 PINK/BLACK (NC) 03 ORANGE (NC) 04 ORANGE/WHITE - KEYSENSE (-) OUTPUT 05 ORANGE/BLACK - PTS 1 (-) OUTPUT 06 BROWN/YELLOW - CANL 07 BROWN/RED - CANH 12V (+) BRAKE SWITCH 1 BRAKE (+) - 02 4 3 2 1 M3 01 YELLOW (NC) 02 YELLOW/RED (NC) 03 YELLOW/BLACK (NC) 1 M4 01 WHITE - 12V (+) CONSTANT 02 WHITE/RED (NC) 03 WHITE/BLACK KEYPORT WITHOUT A COMPATIBLE ACCESSORY M5 01 BLUE/WHITE (NC) 02 WHITE (NC) 03 BLACK - GROUND 04 RED - 12V (+) M5 DATA CABLE OR COMPATIBLE ACCESSORY WITH A COMPATIBLE ACCESSORY. IMPORTANT: SEE THE COMPATIBLE ACCESSORIES PAGE FOR DETAILS. REMOVE BATTERY 87 86 87A 85 10 LOOPS (30 AWG) AROUND KEYFOB 30 M6 01 GREEN/BLACK- HOOD STATUS (-) INPUT 02 BLUE/BLACK (NC) 03 RED/WHITE (NC) 04 BROWN (NC) 05 PURPLE/YELLOW (NC) 06 PURPLE/BLACK (NC) 07 WHITE (NC) 08 BLACK/WHITE (NC) 09 GREEN (NC) 10 PURPLE/WHITE (NC) 1 10 LOOPS (30 AWG) AROUND KEYPORT KEYSENSE (-) - 05 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 12V (+) 7.5A TWO KEYS ARE REQUIRED FOR THIS INSTALLATION. ONE KEY WILL REMAIN PERMANENTLY IN THE VEHICLE. THE OTHER KEY WILL BE USED FOR THE PROGRAMMING PROCEDURE. IT WILL THEN BE RETURNED TO THE OWNER. 1 : CONNECTOR BEHIND KEYPORT HOOD SWITCH 1 INSTALL THE SUPPLIED HOOD SWITCH IF 1 THE VEHICLE IS NOT EQUIPPED WITH ONE. ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com PAGE 8 OF 19 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 ~ ~ Red/Black (+) Behind fuse box ~ 04 pin 02 Red/Black (+) At brake switch ~ CanH ~ ~ ~ ~ Orange/LtGreen (DATA) Twisted wires in door harness in driver kick panel ~ CanL ~ ~ ~ ~ Orange/Brown (DATA) Twisted wires in door harness in driver kick panel ~ ~ ~ ~ ~ Black (+) Behind fusebox ~ PTS 1 ~ ~ 16 pin 06 Black (-) Behind keyport ~ PTS 2 ~ ~ 16 pin 14 Black/Red (-) Behind keyport ~ PTS 3 ~ ~ 16 pin 13 Gray/Blue (-) Behind keyport Keysense ~ ~ 16 pin 05 Black/Yellow (-) Behind keyport ~ 12V ~ ~ ~ ~ Red/Black (+) Behind fuse box ~ Brake ~ ~ 04 pin 03 Red/Black (+) At brake switch ~ CanH ~ ~ ~ ~ Orange/LtGreen (DATA) Twisted wires in door harness in driver kick panel ~ CanL ~ ~ ~ ~ Orange/Brown (DATA) Twisted wires in door harness in driver kick panel ~ ~ ~ ~ ~ Black (+) Behind fusebox ~ PTS 1 ~ ~ 16 pin 06 Black (-) Behind keyport ~ PTS 2 ~ ~ 16 pin 14 Black/Red (-) Behind keyport ~ PTS 3 ~ ~ 16 pin 13 Gray/Blue (-) Behind keyport Keysense ~ ~ 16 pin 05 Black/Yellow (-) Behind keyport ~ 12V ~ ~ ~ ~ Red/Black (+) Behind fuse box ~ Brake ~ ~ 04 pin 03 Red/Black (+) At brake switch ~ CanH ~ ~ ~ ~ Orange/LtGreen (DATA) Twisted wires in door harness in driver kick panel ~ CanL ~ ~ ~ ~ Orange/Brown (DATA) Twisted wires in door harness in driver kick panel ~ ~ ~ ~ ~ Black (+) Behind fusebox ~ PTS 1 ~ ~ 16 pin 06 Black (-) Behind keyport ~ PTS 2 ~ ~ 16 pin 14 Black/Red (-) Behind keyport ~ PTS 3 ~ ~ 16 pin 13 Gray/Blue (-) Behind keyport Keysense ~ ~ 16 pin 05 Black/Yellow (-) Behind keyport 08-16 Ignition 08-16 Ignition 09-17 Ignition ORB-AL(RS)-VW2-[ADS-ALCA]-EN POLARITY ~ ~ CONNECTOR TYPE ~ ~ CONNECTOR COLOR 12V Brake CONNECTOR NAME COMPONENT LOCATOR WIRE DESCRIPTION MODULE LOCATION Q5 Keyport without PTS AT Q5 TDI Keyport without PTS AT SQ5 Keyport without PTS AT WIRE COLOR A5 Keyport without PTS AT RS5 Keyport without PTS AT S5 Keyport without PTS AT DOC.: #84076 • 20231127 POSITION AUDI A4 Keyport without PTS AT A4 Allroad Keyport without PTS AT S4 Keyport without PTS AT YEAR MODEL MAKE TYPE 2 - WIRE CHART - 1 OF 1 ~ www.idatalink.com PAGE 9 OF 19 TYPE 2 - WIRING DIAGRAM - 1 OF 1 DOC.: #84076 • 20231127 CANL M1 CANH M2 M6 M3 M4 DOOR HARNESS IN DRIVER KICK PANEL TWISTED WIRES BEHIND FUSE BOX IGNITION (+) M5 DATA 12V (+) BRAKE SWITCH M1 01 GRAY/YELLOW (NC) 02 GRAY/RED - PTS 3 (-) OUTPUT 03 GREEN/YELLOW (NC) 04 GREEN/RED - PTS 2 (-) OUTPUT 05 BLUE/YELLOW (NC) 06 BLUE/RED (NC) 1 BRAKE (+) - 02 4 3 2 1 M2 01 PINK - IGNITION (+) INPUT 02 PINK/BLACK (NC) 03 ORANGE (NC) 04 ORANGE/WHITE - KEYSENSE (-) OUTPUT 05 ORANGE/BLACK - PTS 1 (-) OUTPUT 06 BROWN/YELLOW - CANL 07 BROWN/RED - CANH 1 KEYPORT M3 01 YELLOW (NC) 02 YELLOW/RED (NC) 03 YELLOW/BLACK (NC) M4 01 WHITE - 12V (+) CONSTANT 02 WHITE/RED (NC) 03 WHITE/BLACK WITHOUT A COMPATIBLE ACCESSORY M5 01 BLUE/WHITE (NC) 02 WHITE (NC) 03 BLACK - GROUND 04 RED - 12V (+) M5 DATA CABLE 10 LOOPS (30 AWG) AROUND KEYFOB 30 OR COMPATIBLE ACCESSORY M6 01 GREEN/BLACK- HOOD STATUS (-) INPUT 02 BLUE/BLACK (NC) 03 RED/WHITE (NC) 04 BROWN (NC) 05 PURPLE/YELLOW (NC) 06 PURPLE/BLACK (NC) 07 WHITE (NC) 08 BLACK/WHITE (NC) 09 GREEN (NC) 10 PURPLE/WHITE (NC) TWO KEYS ARE REQUIRED FOR THIS INSTALLATION. ONE KEY WILL REMAIN PERMANENTLY IN THE VEHICLE. THE OTHER KEY WILL BE USED FOR THE PROGRAMMING PROCEDURE. IT WILL THEN BE RETURNED TO THE OWNER. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 REMOVE BATTERY 87 86 87A 85 1 WITH A COMPATIBLE ACCESSORY. IMPORTANT: SEE THE COMPATIBLE ACCESSORIES PAGE FOR DETAILS. 12V (+) 7.5A KEYSENSE (-) - 05 PTS 1 (-) - 06 PTS 3 (-) - 13 PTS 2 (-) - 14 10 LOOPS (30 AWG) AROUND KEYPORT 1 : CONNECTOR BEHIND KEYPORT 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 HOOD SWITCH 1 INSTALL THE SUPPLIED HOOD SWITCH IF 1 THE VEHICLE IS NOT EQUIPPED WITH ONE. ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com MODULE PROGRAMMING PROCEDURE - 1 OF 1 01 PAGE 10 OF 19 DOC.: #84076 • 20231127 Push start button twice [2x] to ON position. STOP ACC ON START ENGINE START STOP 02 03 Wait, LED 1 will turn solid GREEN then will turn OFF. Push start button once [1x] to OFF position. STOP ACC ON START ENGINE START STOP 04 Module Programming Procedure completed. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com VALET MODE PROGRAMMING PROCEDURE - 1 OF 1 >> NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming. 01 02 >> PAGE 11 OF 19 DOC.: #84076 • 20231127 To exit valet mode: repeat steps 1 to 5. Time restriction. Complete next step within 7 seconds. OFF ACC ON START Cycle ignition ON five times [5x OFF/ON] rapidly. ENGINE START STOP 03 04 Wait, LED 1 will turn solid RED for 2 seconds. Set ignition to OFF position. OFF ACC ON START ENGINE START STOP 05 Valet Mode Programming Procedure completed. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1 >> 01 02 06 LED 1 will flash GREEN once [1x]. Time restriction. Complete next step within 7 seconds. 07 LED 1 will turn solid RED. Cycle ignition ON five times [5x OFF/ON] rapidly. >> WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system. OFF ACC ON START PAGE 12 OF 19 DOC.: #84076 • 20231127 To program additional remotes: repeat steps 4 to 7 using each additional remote. ENGINE START STOP 03 04 LED 1 will turn solid RED. Time restriction. Complete next step within 2 seconds from previous step. 08 09 Wait, LED 1 will turn OFF. Set ignition to OFF position. OFF ACC ON START ENGINE START STOP 05 Press once [1x] on LOCK button of aftermarket remote. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 10 Aftermarket Remote Programming Procedure completed. ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com PAGE 13 OF 19 MODULE NAVIGATION PROCEDURE - 1 OF 1 >> It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. To exit the Module Navigation at any time: Follow STEP 13. >> Module must be programmed to the vehicle. >> 01 Use the Module Navigation Chart on the next page. Set ignition to OFF position. OFF ACC ON START 04 05 TO ACCESS THE OPTIONS: Press and hold programming button until LED 1 turns solid RED. [Y] 06 07 IN THE OPTIONS: Press the programming button as many times as the option number indicates. LED 1 will flash RED an equal amount of times continuously. TO ACCESS THE SETTINGS: Press and hold programming button until LED 1 turns solid GREEN. [Z] LED 1 will flash GREEN as many times as the current (or default) setting number, continuously. [Z] IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED 1 will flash GREEN an equal amount of times continuously. DOC.: #84076 • 20231127 10 11 12 13 To save and return to the OPTIONS: Press and hold programming button until LED 1 turns solid RED. [Y] LED 1 will flash RED as many times as the current option number continuously. Configure every other setting and proceed to step 13. MANDATORY: EXIT MODULE NAVIGATION. Press and hold programming button for 7 seconds. LED 1 will flash RED rapidly. Release programming button. LED 1 will turn OFF. ENGINE START STOP 02 03 TO ACCESS THE MENUS: Press and hold programming button until LED 1 turns solid GREEN. [X] IN THE MENUS: Press the programming button as many times as the menu number indicates. LED 1 will flash GREEN an equal amount of times continuously. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 08 09 To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. ORB-AL(RS)-VW2-[ADS-ALCA]-EN 14 >> Module navigation completed. Failure to exit the Module Navigation will drain vehicle battery. www.idatalink.com PAGE 14 OF 19 MODULE NAVIGATION CHART - 1 OF 1 I Default settings are listed in bold. 01 II Make sure the option is covered on the vehicle before attempting to change the setting. 02 03 DISARM/UNLOCK BEFORE START RELOCK AFTER START RELOCK AFTER SHUTDOWN OFF 02 ON 01 OFF 02 ON 01 OFF 02 ON 01 OFF 02 ON FORCE UNLOCK ALL ON FIRST PRESS 05 N/A 01 N/A 06 N/A 01 N/A 01 DISABLE 02 N/A 03 LOCK + UNLOCK + LOCK 04 LOCK + LOCK + LOCK 01 03 MIN 02 05 MIN 03 10 MIN 04 15 MIN 05 25 MIN 06 30 MIN 07 35 MIN 08 15 MIN 01 02 SEC 02 05 SEC 03 08 SEC 04 10 SEC 05 15 SEC 06 20 SEC 07 25 SEC 08 30 SEC 10-12 N/A 01 N/A 01 01 N/A FACTORY KEYLESS RS SEQUENCE CONFIGURATION 08 09 02-07 Technical Support only 01 04 07 01 [Z] SETTINGS [Y] OPTIONS [X] MENUS MODULE NAVIGATION CHART: NOTES DOC.: #84076 • 20231127 MODULE RUN TIME WAIT TO START DELAY N/A *Vehicle will shutdown when a door is opened. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com REMOTE STARTER ERROR CODES - 1 OF 1 REMOTE STARTER ERROR CODES: NOTES I WARNING: The following applies only when the parking lights are connected and supported by the system. II After a remote starter failure, the parking lights will flash three [3x] times followed by the error code. See table. REMOTE STARTER SHUTDOWN ERROR CODES: NOTES I WARNING: The following applies only when the parking lights are connected and supported by the system. II If the engine shuts down after a remote starter sequence use the query command from a compatible aftermarket remote to display the shutdown error code. The parking lights will flash four [4x] times followed by the error code. See table. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 PARKING LIGHT FLASHES PAGE 15 OF 19 DOC.: #84076 • 20231127 DIAGNOSTIC 3+1 Tach is not programmed OR engine is already running. 3+2 Key is in ignition ON position. 3+3 Door is open. 3+4 Trunk is open. 3+5 Foot brake is ON. 3+6 Hood is open. 3+7 N/A 3+8 Vehicle failed to remote start. 3+9 Vehicle movement detected (VSS). 3 + 10 System is in Valet Mode. 3 + 11 CAN communication failure 3 + 12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence. 3 + 13 Bypass problem. 3 + 14 Idle mode or takeover is not available on this vehicle. 3 + 15 Overheat protection. PARKING LIGHT FLASHES DIAGNOSTIC 4+1 Engine tach signal was lost. 4+2 Emergency brake signal was lost. 4+3 Foot brake ON detected. 4+4 Hood open detected. 4+5 Tach over rev detected. 4+6 Glow plug timeout error. 4+7 Vehicle movement detected (VSS). 4+8 Check engine light ON. 4+9 Low fuel level. 4 + 10 Open door detected. 4 + 11 CAN communication failure during RS sequence. 4 + 12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence. 4 + 13 Bypass problem. 4 + 14 Idle mode or takeover is not available on this vehicle. 4 + 15 Overheat protection. ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com I II III DURING PROGRAMMING DURING REMOTE START WITH IGNITION OFF Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 DIAGNOSTIC TEST MODULE LED 1 STATUS MODULE DIAGNOSTICS - 1 OF 1 Flashing RED Missing/wrong information from firmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. Solid GREEN then OFF Module correctly programmed. OFF No activity or module already programmed. Flashing RED Module incorrectly programmed. Solid RED Module incorrectly programmed. Flashing GREEN Module correctly programmed and operational. Solid GREEN then OFF Reset in progress. OFF Invalid ground when running status from remote starter. Flashing RED Module incorrectly programmed or connected. Solid RED Module not programmed. Waiting for more vehicle information. Flashing GREEN False ground when running status from remote starter. Solid GREEN then OFF Reset in progress. OFF Module at rest and ready for a remote start sequence. ORB-AL(RS)-VW2-[ADS-ALCA]-EN PAGE 16 OF 19 DOC.: #84076 • 20231127 www.idatalink.com MODULE RESET PROCEDURE - 1 OF 1 01 02 Disconnect all connectors from module except the BLACK 4-PIN connector. Disconnect the BLACK 4-PIN connector. 03 PRESS AND HOLD programming button while connecting the BLACK 4-PIN connector. 04 Wait, LED 1 will flash RED. RELEASE programming button. 05 LED 1 will turn RED for 2 seconds. 06 Module RESET completed. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 07 Reconnect all connectors. 08 Repeat programming procedure. >> PAGE 17 OF 19 DOC.: #84076 • 20231127 Failure to follow procedure may result with a DTC or a CHECK ENGINE error message. ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com TAKEOVER PROCEDURE - 1 OF 1 >> All vehicle doors must be closed and locked prior to remote start sequence. 06 01 Time restriction. Complete steps 2 to 5 within 45 seconds. >> 02 Press unlock on OEM or aftermarket remote or request switch. 03 Open driver door and enter vehicle. 04 Close driver door. 05 Press and release BRAKE pedal. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 PAGE 18 OF 19 DOC.: #84076 • 20231127 Take over procedure completed. Failure to follow procedure will result in vehicle engine shutdown. ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com INSTALLATION CHECKLIST - 1 OF 1 PAGE 19 OF 19 DOC.: #84076 • 20231127 CHECKLIST 1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 Press the LOCK button once [1x] on the aftermarket keyfob. 9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle. Question 7: Does the vehicle shut down? Question 1: Do the doors lock? YES: Go to next step. NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support. RAP and auto light shutdown test YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 10 4 Press the UNLOCK button once [1x] on the aftermarket keyfob. YES: Go to next step. NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists. Question 2: Do the doors unlock? Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown? YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 11 Open hood. 12 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported. 13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. Question 3: Does the trunk or hatch open/unlock? Question 9: Does the vehicle remote start? YES: Close trunk or hatch and go to next step. NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. Press the AUX 1 button once [1x] on the aftermarket keyfob if supported. 15 Enter vehicle and close the doors. Question 4: Does the driver side sliding door open? 16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step. 17 Wait for the vehicle to start. NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. 18 Press brake pedal. 7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported. YES: Go to next step. 6 YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. NO: Go to next step. 14 Close hood. Question 10: Does the vehicle shut down? Question 5: Does the passenger side sliding door open? YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step. NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support. 19 Exit vehicle. 8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. 20 Installation checklist completed. Question 6: Does the vehicle remote start? YES: Go to next step. NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 ORB-AL(RS)-VW2-[ADS-ALCA]-EN www.idatalink.com ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Remote Start
- Secure Takeover
- Door Lock/Unlock
- Trunk Release
- Engine Control
- Vehicle Status
- Aftermarket Remote Programming
- Valet Mode
- Error Codes
- Module Programming
Frequently asked questions
No, the ORB-AL(RS)-VW2-[ADS-ALCA] is specifically designed for certain Audi models and years, as mentioned in the installation guide. You can find the supported vehicle list within the document.
The installation guide provides detailed wiring diagrams and instructions for connecting the module to specific vehicle components. It's recommended that installation be performed by certified technicians.
Yes, you can program up to four aftermarket remotes for remote start and other vehicle functions. The installation guide details the programming procedure step-by-step.