Automotive Data Solutions IDSS-CH(RS)-CH8-[CMCHXA0] Ram 3500 2013 Installation Guide
Automotive Data Solutions IDSS-CH(RS)-CH8-[CMCHXA0] is a remote start system designed for specific Ram models, including the 2013 Ram 3500. It offers a range of features for controlling your vehicle remotely, such as starting the engine, locking and unlocking doors, and more. Designed for professional installation, this system allows users to start their vehicle from a distance, providing comfort and convenience in various weather conditions.
PDF
Download
Document
Advertisement
Advertisement
INSTALL GUIDE IDSS-CH(RS)-CH8-[CMCHXA0]-EN DOCUMENT NUMBER 82701 REVISION DATE 20230628 FIRMWARE IDSS-CH(RS)-CH8-[CMCHXA0] HARDWARE CMCHXA0 ACCESSORIES ADS-USB (REQUIRED) COMPATIBLE RF-KIT (OPTIONAL) DIRECTED SMARTSTART & ADS-HRN(RS)-SM01 (OPTIONAL) TERMS OF USE: Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 BEFORE INSTALLATION 1- Connect module to computer 2- Login to Weblink account 3- Flash firmware to module (module is not preloaded with firmware) 4- Use accessories accordingly (accessories are sold separately) www.idatastart.com PAGE 2 OF 31 VEHICLE LIST - 1 OF 1 DOC.: #82701 • 20230628 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 14-17 2 • • • • 1500 / 2500 / 3500 Diesel STD key (Tip-Start) AT 18 3 • • • 1500 Classic Diesel STD key (Tip-Start) AT 19-23 3 • • • Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN RAP SHUTDOWN CTRL 1500 / 2500 / 3500 Diesel STD key (Tip-Start) AT • • GLOW PLUGS STATUS 19-23 3 SECURE TAKEOVER 1500 Classic STD key (Tip-Start) AT TACHOMETER OUTPUT • BRAKE PEDAL STATUS OUTPUT 3 • DOOR STATUS OUTPUT • 18 • TRUNK/HATCH RELEASE 13-17 2 1500 / 2500 / 3500 STD key (Tip-Start) AT • DISARM OEM ALARM DATA IMMOBILIZER BYPASS 1500 / 2500 / 3500 STD key (Tip-Start) AT • ARM OEM ALARM INSTALL TYPE • DOOR UNLOCK YEAR 13-16 1 DOOR LOCK MODEL DODGE MAKE RAM Dart STD key (Tip-Start) AT TRUNK STATUS OUTPUT NOTE I WARNING: All vehicle doors must be closed and locked prior to remote start sequence. 3X LOCK START/STANDALONE MOD. FEATURES • www.idatastart.com PAGE 3 OF 31 BOX CONTENTS - 1 OF 1 DOC.: #82701 • 20230628 BOX CONTENTS MODULE T-HARNESS 1 (ADS-THR-CH7 sold separately) LED 2 BLUE BLACK BLACK 2 4 6 1 3 5 2 1 4 3 6 5 8 7 10 9 12 11 14 13 16 15 18 17 20 19 2 1 4 3 6 5 8 7 10 9 12 11 PROGRAMMING BUTTON LED 1 A G F B E 4 3 2 1 BLACK RF PORT/ WEBLINK PORT 4 3 2 1 BLUE TELEMATIC PORT 3 2 1 BLACK 9 10 7 8 5 6 3 4 1 2 WHITE 10 PIN CONNECTOR VS2 MS2 VS1 MS1 12 PIN CONNECTOR T-HARNESS 2 1 (ADS-THR-CH10 sold separately) MS2 10 PIN CONNECTOR VS2 C D VS1 MS1 VS3 12 PIN CONNECTOR VS4 AFTERMARKET HOOD SWITCH AND CABLE VS6 WARNING STICKER VS5 VS7 VS8 WEBLINK CABLE (required accessory sold separately) WEBLINK CABLE MODULE WEBLINK PORT COMPUTER USB PORT 4 PIN BLACK CABLE Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 4 OF 31 COMPATIBLE ACCESSORIES - 1 OF 1 DOC.: #82701 • 20230628 RF KIT (accessories sold separately) RF KIT MODULE RF PORT ANTENNA TELEMATIC KIT (accessories sold separately) ADS-HRN(RS)-SM01 DIRECTED SMARTSTART (NC) MODULE TELEMATIC PORT (NC) (NC) Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 5 OF 31 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 POLARITY MODULE LOCATION COMPONENT LOCATOR ~ Black 16 pin 06 Gray/White (DATA) OBDII connector ~ ~ Black 16 pin 14 Yellow (DATA) OBDII connector ~ Parking Light ~ Black 06 pin 03 White/Brown (MUX) Parking light switch A Driver door pin ~ ~ ~ ~ (-) Harness in driver kick panel ~ WIRE COLOR POSITION CanH CanL CONNECTOR NAME CONNECTOR TYPE DOC.: #82701 • 20230628 CONNECTOR COLOR 13-16 WIRE DESCRIPTION MODEL Dart STD key AT YEAR MAKE DODGE TYPE 1 - WIRE CHART - 1 OF 1 Purple IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 6 OF 31 TYPE 1 - WIRING DIAGRAM - 1 OF 1 (ADS-THR-CH7) DOC.: #82701 • 20230628 IGNITION SWITCH VS2 M1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 1: IGNITION CONNECTOR M7 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 1: IGNITION HARNESS VS1 M4 MS2 OBDII CONNECTOR CANH - 06 BROWN/RED 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CANL - 14 BROWN/YELLOW PARKING LIGHT SWITCH BLACK MS1 WHITE/BLACK (NC) WHITE/BROWN WHITE/RED (NC) WHITE (NC) PARKING LIGHT (MUX) - 03 6 5 4 3 2 1 DRIVER KICK PANEL HARNESS DRIVER DOOR PIN (-) M3 01 02 GRAY - RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 HORN (-) 1 OPTIONAL 1 M4 01 02 03 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 7 OF 31 TYPE 1 - WIRING DIAGRAM - 1 OF 2 (ADS-THR-CH10) DOC.: #82701 • 20230628 IGNITION SWITCH VS2 M1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 BROWN 16 17 18 PURPLE 19 20 1: IGNITION CONNECTOR M7 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 1: IGNITION HARNESS VS1 M4 MS2 OBDII CONNECTOR OBDII HARNESS VS3 PURPLE (NC) VS4 OBDII HOLDER MS1 M3 01 02 GRAY - RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 PARKING LIGHT SWITCH 3 3 VS6 ONLY FOR ADS-HRN(RS)-CHR10 VER1.20 NOTE 1 (SEE NEXT PAGE) LIGHT SWITCH CONNECTOR LIGHT SWITCH HARNESS VS5 VS7 NC DRIVER KICK PANEL VS8 NC HARNESS DRIVER DOOR PIN (-) M4 01 02 03 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 HORN (-) 1 OPTIONAL 1 HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com TYPE 1 - WIRING DIAGRAM - 2 OF 2 (ADS-THR-CH10_VER1.20) PAGE 8 OF 31 DOC.: #82701 • 20230628 ONLY FOR ADS-HRN(RS)-CHR10 VER1.20 NOTE 1 STEP 1: -IDENTIFY THE PURPLE (PIN 18) AND BROWN (PIN 15) WIRES FROM THE 20 PIN BLACK CONNECTOR OF THE T‐HARNESS. -CUT THE PURPLE WIRE. -CAREFULLY STRIP THE BROWN WIRE USING A WIRE STRIPPER. STEP 2: -CONNECT AND SOLDER THE PURPLE WIRE TO THE BROWN WIRE. WARNING FAILURE TO PROPERLY SOLDER CAN RESULT IN FAULTY CONNECTIONS AND PRODUCT MALFUNCTION STEP 3: -INSULATE THE CONNECTIONS WITH ELECTRICAL TAPE. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 9 OF 31 TYPE 1 - WIRING DIAGRAM - 1 OF 1 (ADS-THR-CH12) DOC.: #82701 • 20230628 IGNITION SWITCH VS2 M1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 1: IGNITION CONNECTOR M7 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 1: IGNITION HARNESS VS1 M4 MS2 OBDII CONNECTOR OBDII HARNESS VS3 PURPLE (NC) VS4 VS7 OBDII HOLDER NC MS1 VS8 JS1 CONNECT PARKING LIGHT SWITCH NC VS6 LIGHT SWITCH CONNECTOR JS2 LIGHT SWITCH HARNESS VS5 M3 01 02 GRAY - RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 DRIVER KICK PANEL DRIVER DOOR PIN (-) HARNESS M4 01 02 03 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 HORN (-) 1 OPTIONAL 1 HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 10 OF 31 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 COMPONENT LOCATOR D7405A Black 16 pin 06 Gray/White (DATA) OBDII connector ~ D7405A Black 16 pin 14 Yellow (DATA) OBDII connector ~ Parking Light D2242A Black 10 pin 01 White/Brown (MUX) Parking light switch A Driver door pin ~ ~ ~ ~ (-) Harness in driver kick panel ~ CanH D7405A Black 16 pin 06 Gray/White (DATA) OBDII connector ~ CanL D7405A Black 16 pin 14 Yellow (DATA) OBDII connector ~ Parking Light D2242A Black 10 pin 01 White/Brown (MUX) Parking light switch A Driver door pin ~ ~ ~ ~ (-) Harness in driver kick panel ~ WIRE COLOR CanH CanL CONNECTOR NAME MODULE LOCATION WIRE DESCRIPTION POLARITY 13-17 POSITION 13-17 CONNECTOR TYPE 2500 / 2500 Diesel / 3500 / 3500 Diesel YEAR MODEL 1500 / 1500 Diesel STD key AT DOC.: #82701 • 20230628 CONNECTOR COLOR RAM MAKE TYPE 2 - WIRE CHART - 1 OF 1 Purple Purple IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 11 OF 31 TYPE 2 - WIRING DIAGRAM - 1 OF 1 (ADS-THR-CH7) DOC.: #82701 • 20230628 IGNITION SWITCH VS2 M1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 1: IGNITION CONNECTOR M7 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 1: IGNITION HARNESS VS1 M4 MS2 OBDII CONNECTOR CANH - 06 BROWN/RED 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CANL - 14 BROWN/YELLOW PARKING LIGHT SWITCH BLACK MS1 WHITE/BLACK (NC) WHITE/BROWN WHITE/RED (NC) WHITE (NC) PARKING LIGHT (MUX) - 01 1 2 3 4 5 6 7 8 9 10 DRIVER KICK PANEL HARNESS M3 01 02 GRAY - RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 DRIVER DOOR PIN (-) HORN (-) 1 M4 01 02 03 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 OPTIONAL 1 HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 12 OF 31 TYPE 2 - WIRING DIAGRAM - 1 OF 2 (ADS-THR-CH10) DOC.: #82701 • 20230628 IGNITION SWITCH VS2 M1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 BROWN 16 17 18 PURPLE 19 20 1: IGNITION CONNECTOR M7 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 1: IGNITION HARNESS VS1 M4 MS2 OBDII CONNECTOR OBDII HARNESS VS3 PURPLE (NC) VS4 OBDII HOLDER MS1 M3 01 02 GRAY - RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 PARKING LIGHT SWITCH 3 3 VS7 ONLY FOR ADS-HRN(RS)-CHR10 VER1.20 NOTE 1 (SEE NEXT PAGE) LIGHT SWITCH CONNECTOR LIGHT SWITCH HARNESS VS8 VS5 VS6 NC DRIVER KICK PANEL VS5 NC HARNESS DRIVER DOOR PIN (-) M4 01 02 03 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 HORN (-) 1 OPTIONAL 1 HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com TYPE 2 - WIRING DIAGRAM - 2 OF 2 (ADS-THR-CH10_VER1.20) PAGE 13 OF 31 DOC.: #82701 • 20230628 ONLY FOR ADS-HRN(RS)-CHR10 VER1.20 NOTE 1 STEP 1: -IDENTIFY THE PURPLE (PIN 18) AND BROWN (PIN 15) WIRES FROM THE 20 PIN BLACK CONNECTOR OF THE T‐HARNESS. -CUT THE PURPLE WIRE. -CAREFULLY STRIP THE BROWN WIRE USING A WIRE STRIPPER. STEP 2: -CONNECT AND SOLDER THE PURPLE WIRE TO THE BROWN WIRE. WARNING FAILURE TO PROPERLY SOLDER CAN RESULT IN FAULTY CONNECTIONS AND PRODUCT MALFUNCTION STEP 3: -INSULATE THE CONNECTIONS WITH ELECTRICAL TAPE. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 14 OF 31 TYPE 2 - WIRING DIAGRAM - 1 OF 1 (ADS-THR-CH12) DOC.: #82701 • 20230628 IGNITION SWITCH VS2 M1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 1: IGNITION CONNECTOR M7 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 1: IGNITION HARNESS VS1 M4 MS2 OBDII CONNECTOR OBDII HARNESS VS3 PURPLE (NC) VS4 VS6 OBDII HOLDER NC MS1 PARKING LIGHT SWITCH VS5 JS1 CONNECT NC VS7 LIGHT SWITCH CONNECTOR JS2 LIGHT SWITCH HARNESS VS8 VS5 DRIVER KICK PANEL M3 01 02 GRAY - RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 DRIVER DOOR PIN (-) HARNESS M4 01 02 03 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 HORN (-) 1 OPTIONAL 1 HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 15 OF 31 MODULE LOCATION COMPONENT LOCATOR Gray 10 pin 02 Orange (DATA) Trailer module, right of steering column ~ Gray 10 pin 01 Yellow (DATA) Trailer module, right of steering column ~ Driver door pin ~ ~ ~ ~ (-) Harness in driver kick panel ~ CanH ~ Gray 10 pin 02 Orange (DATA) Trailer module, right of steering column ~ 19-23 CanL ~ 1500 Diesel / 2500 Diesel / 3500 Diesel STD key AT 1500 Classic Diesel STD key AT Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 WIRE COLOR ~ ~ CONNECTOR NAME CanH Purple ~ Gray 10 pin 01 Yellow (DATA) Trailer module, right of steering column Driver door pin ~ ~ ~ ~ (-) Harness in driver kick panel ~ CanH ~ Gray 10 pin 02 Orange (DATA) Trailer module, right of steering column ~ CanL ~ Gray 10 pin 01 Yellow (DATA) Trailer module, right of steering column ~ Driver door pin ~ ~ ~ ~ (-) Harness in driver kick panel ~ CanH ~ Gray 10 pin 02 Orange (DATA) Trailer module, right of steering column ~ 19-23 CanL ~ Gray 10 pin 01 Yellow (DATA) Trailer module, right of steering column ~ ~ ~ ~ ~ (-) Harness in driver kick panel ~ RAM 1500 Classic STD key AT POLARITY CanL POSITION WIRE DESCRIPTION 18 CONNECTOR TYPE YEAR 1500 / 2500 / 3500 STD key AT DOC.: #82701 • 20230628 CONNECTOR COLOR MODEL MAKE TYPE 3 - WIRE CHART - 1 OF 1 18 Driver door pin Purple Purple Purple IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 16 OF 31 TYPE 3 - WIRING DIAGRAM - 1 OF 1 (ADS-THR-CH7) DOC.: #82701 • 20230628 IGNITION SWITCH VS2 M1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 1: IGNITION CONNECTOR M7 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 1: IGNITION HARNESS VS1 M4 MS2 TRAILER PACK CONNECTOR GRAY CANH - 02 BROWN/RED CANL - 01 BROWN/YELLOW 1 2 3 4 6 7 8 9 10 5 PARKING LIGHT SWITCH BLACK MS1 1 2 3 4 5 WHITE/BLACK (NC) WHITE/BROWN WHITE/RED (NC) WHITE (NC) PARKING LIGHT (MUX) - 01 6 7 8 9 10 DRIVER KICK PANEL HARNESS M3 01 02 GRAY - RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 DRIVER DOOR PIN (-) HORN (-) 1 OPTIONAL 1 M4 01 02 03 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 17 OF 31 TYPE 3 - WIRING DIAGRAM - 1 OF 2 (ADS-THR-CH10) DOC.: #82701 • 20230628 IGNITION SWITCH VS2 M1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 BROWN 16 17 18 PURPLE 19 20 1: IGNITION CONNECTOR M7 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 1: IGNITION HARNESS VS1 M4 MS2 OBDII CONNECTOR OBDII HARNESS VS3 PURPLE (NC) BROWN/RED VS4 BROWN/YELLOW OBDII HOLDER MS1 M3 01 02 GRAY - RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 PARKING LIGHT SWITCH 3 3 VS7 ONLY FOR ADS-HRN(RS)-CHR10 VER1.20 NOTE 1 (SEE NEXT PAGE) LIGHT SWITCH CONNECTOR LIGHT SWITCH HARNESS VS8 VS5 VS6 NC TRAILER PACK CONNECTOR GRAY VS5 NC CANH - 02 CANL - 01 1 2 3 4 6 7 8 9 10 5 DRIVER KICK PANEL HARNESS M4 01 02 03 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 DRIVER DOOR PIN (-) HORN (-) 1 OPTIONAL 1 HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com TYPE 3 - WIRING DIAGRAM - 2 OF 2 (ADS-THR-CH10_VER1.20) PAGE 18 OF 31 DOC.: #82701 • 20230628 ONLY FOR ADS-HRN(RS)-CHR10 VER1.20 NOTE 1 STEP 1: -IDENTIFY THE PURPLE (PIN 18) AND BROWN (PIN 15) WIRES FROM THE 20 PIN BLACK CONNECTOR OF THE T‐HARNESS. -CUT THE PURPLE WIRE. -CAREFULLY STRIP THE BROWN WIRE USING A WIRE STRIPPER. STEP 2: -CONNECT AND SOLDER THE PURPLE WIRE TO THE BROWN WIRE. WARNING FAILURE TO PROPERLY SOLDER CAN RESULT IN FAULTY CONNECTIONS AND PRODUCT MALFUNCTION STEP 3: -INSULATE THE CONNECTIONS WITH ELECTRICAL TAPE. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 19 OF 31 TYPE 3 - WIRING DIAGRAM - 1 OF 1 (ADS-THR-CH12) DOC.: #82701 • 20230628 IGNITION SWITCH VS2 M1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 1: IGNITION CONNECTOR M7 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 1: IGNITION HARNESS VS1 M4 MS2 OBDII CONNECTOR OBDII HARNESS VS3 PURPLE (NC) VS4 VS6 OBDII HOLDER NC MS1 M3 01 02 GRAY - RAP SHUTDOWN (-) OUTPUT 03 04 05 06 07 08 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 JS2 PARKING LIGHT SWITCH VS5 NC NC VS7 LIGHT SWITCH CONNECTOR LIGHT SWITCH HARNESS JS1 CONNECT VS8 VS5 JS3 VS11 NC VS12 NC CAN JUNCTION BLOCK, LEFT OF DRIVER SIDE DASH VS9 GREEN JUNCTION BLOCK WHITE 2 PIN CONNECTOR, GREEN JUNCTION BLOCK VS10 DRIVER KICK PANEL M4 01 02 03 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 DRIVER DOOR PIN (-) HARNESS HORN (-) 1 OPTIONAL 1 HOOD SWITCH 2 INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 20 OF 31 MODULE PROGRAMMING PROCEDURE - 1 OF 2 01 Close driver door. Re-open driver door to wake up data bus. 07 ACC 03 04 ACC Press Unlock on OEM remote. If the vehicle is not equipped with an OEM remote, press the module programming button. 08 Wait, LED will flash GREEN once [1x]. If LED does not flash GREEN, press Unlock on OEM remote again. 09 Turn key to ON position. 10 Wait, LED will turn solid RED. 11 ON 05 Connect module to computer and proceed with extended programming. Insert key into ignition. 14 WARNING: Do not press module programming button. Connect power first. Connect module to vehicle. Turn key to ON position. 15 START ACC ON START OFF ACC ON START OFF ACC OFF Turn key to OFF position. ACC OFF 13 Turn key to ON position. ACC ON START OFF Wait, LED will flash GREEN. 16 Turn key to OFF position. 17 Wait, LED will turn solid GREEN for 2 seconds. START OFF 06 Remove key. ON OFF 02 DOC.: #82701 • 20230628 ON START Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 12 ON START Turn key to OFF position. ACC ON START OFF WARNING: Disconnect power last. Disconnect module from vehicle. 18 Turn key to START position. ACC OFF IDSS-CH(RS)-CH8-[CMCHXA0]-EN ON START www.idatastart.com MODULE PROGRAMMING PROCEDURE - 2 OF 2 19 Turn key to OFF position. ACC OFF 20 PAGE 21 OF 31 DOC.: #82701 • 20230628 ON START Module Programming Procedure completed. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com VALET MODE PROGRAMMING PROCEDURE - 1 OF 1 >> NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming. 01 Time restriction. Complete next step within 7 seconds. 02 OFF ACC ON START >> PAGE 22 OF 31 DOC.: #82701 • 20230628 To exit valet mode: repeat steps 1 to 5. Cycle ignition ON five times [5x OFF/ON] rapidly. ENGINE START STOP 03 04 Wait, LED 1 will turn solid RED for 2 seconds. Set ignition to OFF position. OFF ACC ON START ENGINE START STOP 05 Valet Mode Programming Procedure completed. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1 >> WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system. 06 LED 1 will flash GREEN once [1x]. 01 Time restriction. Complete next step within 7 seconds. 07 LED 1 will turn solid RED. Cycle ignition ON five times [5x OFF/ON] rapidly. >> To program additional remotes: repeat steps 4 to 7 using each additional remote. 03 LED 1 will turn solid RED. 08 Wait, LED 1 will turn OFF. 04 Time restriction. Complete next step within 2 seconds from previous step. 09 02 OFF ACC ON START PAGE 23 OF 31 DOC.: #82701 • 20230628 ENGINE START STOP Set ignition to OFF position. OFF ACC ON START ENGINE START STOP 05 Press once [1x] on LOCK button of aftermarket remote. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 10 Aftermarket Remote Programming Procedure completed. IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 24 OF 31 MODULE NAVIGATION PROCEDURE - 1 OF 1 >> It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. To exit the Module Navigation at any time: Follow STEP 13. 04 >> Module must be programmed to the vehicle. 05 >> Use the Module Navigation Chart on the next page. 06 Set ignition to OFF position. 07 TO ACCESS THE MENUS: Press and hold programming button until LED 1 turns solid GREEN. 08 IN THE MENUS: Press the programming button as many times as the menu number indicates. LED 1 will flash GREEN an equal amount of times continuously. 09 01 OFF ACC ON START DOC.: #82701 • 20230628 TO ACCESS THE OPTIONS: Press and hold programming button until LED 1 turns solid RED. 10 IN THE OPTIONS: Press the programming button as many times as the option number indicates. LED 1 will flash RED an equal amount of times continuously. 11 TO ACCESS THE SETTINGS: Press and hold programming button until LED 1 turns solid GREEN. 12 Configure every other setting and proceed to step 13. [Z] LED 1 will flash GREEN as many times as the current (or default) setting number, continuously. 13 MANDATORY: EXIT MODULE NAVIGATION. Press and hold programming button for 7 seconds. LED 1 will flash RED rapidly. Release programming button. LED 1 will turn OFF. [Z] IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED 1 will flash GREEN an equal amount of times continuously. 14 Module navigation completed. To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. >> Failure to exit the Module Navigation will drain vehicle battery. [Y] To save and return to the OPTIONS: Press and hold programming button until LED 1 turns solid RED. [Y] LED 1 will flash RED as many times as the current option number continuously. ENGINE START STOP 02 03 [X] Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 25 OF 31 MODULE NAVIGATION CHART - 1 OF 2 I Default settings are listed in bold. 01 II Make sure the option is covered on the vehicle before attempting to change the setting. 02 03 04 01 [Z] SETTINGS [Y] OPTIONS [X] MENUS MODULE NAVIGATION CHART: NOTES CONFIGURATION DOC.: #82701 • 20230628 DISARM/UNLOCK BEFORE START RELOCK AFTER START RELOCK AFTER SHUTDOWN FORCE UNLOCK ALL ON FIRST PRESS 01 OFF 02 ON 01 OFF 02 ON 01 OFF 02 ON 01 OFF 02 ON 01 ENABLE 02 DISABLE* 05 TAKEOVER 06 N/A 01 N/A 07 N/A 01 N/A 01 03 MIN 02 05 MIN 03 10 MIN 04 15 MIN 05 25 MIN 06 30 MIN 07 35 MIN 08 15 MIN 01 02 SEC 02 05 SEC 03 08 SEC 04 10 SEC 05 15 SEC 06 20 SEC 07 25 SEC 08 09 MODULE RUN TIME WAIT TO START DELAY 08 30 SEC 10 N/A 01 N/A 11 N/A 01 N/A 12 N/A 01 N/A 13 N/A 01 N/A *Vehicle will shutdown when a door is opened. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com PAGE 26 OF 31 MODULE NAVIGATION CHART - 2 OF 2 14 01 [Z] SETTINGS [Y] OPTIONS [X] MENUS MODULE NAVIGATION CHART: NOTES HORN EVENT TRIGGER CONFIGURATION 15 02-07 Technical Support only 01 DOC.: #82701 • 20230628 HORN CHIRPS WIDTH N/A 01 DOUBLE LOCK 02 LOCK + UNLOCK 03 LOCK + UNLOCK + START 04 DOUBLE LOCK + START 01 30 mSEC 02 15 mSec 03 60 mSec 01 N/A *Vehicle will shutdown when a door is opened. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com [X] NUMBER OF PARKING LIGHT FLASHES DIAGNOSTIC REMOTE STARTER ERROR CODES - 1 OF 1 I WARNING: The following applies only when the parking lights are connected and supported by the system. 01 Engine running. 02 Key in ignition at ON position. II After a remote starter failure, the parking lights will flash three [3x] times, then will flash [X] number times to indicate an error code. See table. 03 N/A 04 Trunk is open. 05 Foot brake is ON. 06 Hood is open. 07 N/A 08 Tach failure. 09 N/A 10 System is in Valet Mode. 11 CAN communication failure 12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence. [Y] NUMBER OF PARKING LIGHT FLASHES DIAGNOSTIC REMOTE STARTER ERROR CODES: NOTES I WARNING: The following applies only when the parking lights are connected and supported by the system. 01 Engine tach signal is lost. 02 N/A II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote. 03 Foot brake is ON. 04 Hood is open. 05 Engine RPM limiter is ON. 06 Glow plug timeout error. 07 Vehicle is moving (VSS). 08 Check engine warning light is ON. 09 Low fuel warning light is ON. 10 N/A 11 CAN communication failure during RS sequence. REMOTE STARTER SHUTDOWN ERROR CODES: NOTES The parking lights will flash four [4x] times, then will flash [Y] number times to indicate an error code. See table. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN PAGE 27 OF 31 DOC.: #82701 • 20230628 www.idatastart.com I II III DURING PROGRAMMING DURING REMOTE START WITH IGNITION OFF Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 DIAGNOSTIC TEST MODULE LED 1 STATUS MODULE DIAGNOSTICS - 1 OF 1 Flashing RED Missing/wrong information from firmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. Solid GREEN then OFF Module correctly programmed. OFF No activity or module already programmed. Flashing RED Module incorrectly programmed. Solid RED Module incorrectly programmed. Flashing GREEN Module correctly programmed and operational. Solid GREEN then OFF Reset in progress. OFF Invalid ground when running status from remote starter. Flashing RED Module incorrectly programmed or connected. Solid RED Module not programmed. Waiting for more vehicle information. Flashing GREEN False ground when running status from remote starter. Solid GREEN then OFF Reset in progress. OFF Module at rest and ready for a remote start sequence. IDSS-CH(RS)-CH8-[CMCHXA0]-EN PAGE 28 OF 31 DOC.: #82701 • 20230628 www.idatastart.com MODULE RESET PROCEDURE - 1 OF 1 01 Disconnect all connectors from module except the BLACK 20-PIN connector. 07 Reconnect all connectors. 02 Disconnect the BLACK 20-PIN connector. 08 Repeat programming procedure. 03 PRESS AND HOLD the module’s programming button while connecting the BLACK 20-PIN connector. >> Failure to follow procedure may result with a DTC or a CHECK ENGINE error message. 04 Wait, LED 1 will flash RED. RELEASE programming button. 05 LED 1 will turn RED for 2 seconds. 06 Module RESET completed. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN PAGE 29 OF 31 DOC.: #82701 • 20230628 www.idatastart.com TAKEOVER PROCEDURE - 1 OF 1 >> All vehicle doors must be closed and locked prior to remote start sequence. 06 Press and release BRAKE pedal. 01 Time restriction. Complete steps 2 to 6 within 45 seconds. 07 Take over procedure completed. 02 Press unlock on OEM or aftermarket remote. >> Failure to follow procedure will result in vehicle engine shutdown. 03 Open driver door and enter vehicle. 04 Close driver door. 05 PAGE 30 OF 31 DOC.: #82701 • 20230628 Turn key to ON position. ACC OFF ON START Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com INSTALLATION CHECKLIST - 1 OF 1 PAGE 31 OF 31 DOC.: #82701 • 20230628 CHECKLIST 1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 Press the LOCK button once [1x] on the aftermarket keyfob. 9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle. Question 7: Does the vehicle shut down? Question 1: Do the doors lock? ¨ YES: Go to next step. ¨ NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support. RAP and auto light shutdown test ¨ YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 10 ¨ 4 Press the UNLOCK button once [1x] on the aftermarket keyfob. ¨ YES: Go to next step. ¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists. Question 2: Do the doors unlock? Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown? ¨ YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 11 Open hood. ¨ 12 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported. 13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. Question 3: Does the trunk or hatch open/unlock? Question 9: Does the vehicle remote start? ¨ YES: Close trunk or hatch and go to next step. ¨ NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. Press the AUX 1 button once [1x] on the aftermarket keyfob if supported. 15 Enter vehicle and close the doors. Question 4: Does the driver side sliding door open? 16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. ¨ YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step. 17 Wait for the vehicle to start. ¨ NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. 18 Press brake pedal. 7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported. ¨ YES: Go to next step. 6 ¨ YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. ¨ NO: Go to next step. 14 Close hood. Question 10: Does the vehicle shut down? Question 5: Does the passenger side sliding door open? ¨ YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step. ¨ ¨ NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support. 19 Exit vehicle. 8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. 20 Installation checklist completed. Question 6: Does the vehicle remote start? ¨ YES: Go to next step. ¨ NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2023 IDSS-CH(RS)-CH8-[CMCHXA0]-EN www.idatastart.com ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Remote start
- Door lock/unlock
- Remote engine control
- Vehicle diagnostics
- Valet mode
- Aftermarket remote programming
Frequently asked questions
This device is a remote start system for specific Ram models. It allows you to start the engine from a distance, providing convenience and added comfort.
The required accessory is the ADS-USB cable (sold separately). Optional accessories include the compatible RF-KIT, Directed SmartStart, and ADS-HRN(RS)-SM01. These accessories are sold separately.
The device needs to be programmed to the vehicle. Follow the Module Programming Procedure outlined in the manual.
Refer to the wiring diagrams for the specific model and type of T-harness used. Make sure to follow the instructions carefully for proper connection.
The parking light switch is used for diagnostics. The parking lights will flash to indicate error codes during remote start failures or shutdowns. Refer to the Diagnostic section in the manual for details.