Automotive Data Solutions CS-FO(RS)-FO1C-[CMMIXA0] Ford Focus 2012 Installation Guide
Automotive Data Solutions CS-FO(RS)-FO1C-[CMMIXA0] is a device designed for installation in Ford vehicles. It primarily offers remote start capabilities and data immobilizer bypass functionality. Users can also control other features like door locks, trunk release, and parking lights remotely. The device requires the ADS-USB accessory for firmware flashing and accessories are sold separately.
PDF
Download
Document
Advertisement
Advertisement
INSTALL GUIDE CS-FO(RS)-FO1C-[CMMIXA0]-EN DOCUMENT NUMBER 68054 REVISION DATE 20191206 FIRMWARE CS-FO(RS)-FO1C-[CMMIXA0] HARDWARE CMMIXA0 ACCESSORIES ADS-USB (REQUIRED) CRIMESTOPPER REVOSTART RF-KIT (OPTIONAL) TERMS OF USE: Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 BEFORE INSTALLATION 1- Connect module to computer 2- Login to Weblink account 3- Flash firmware to module (module is not preloaded with firmware) 4- Use accessories accordingly (accessories are sold separately) www.idatastart.com PAGE 2 OF 24 VEHICLE LIST - 1 OF 1 DOC.: #68054 • 20191206 INSTALL TYPE DATA IMMOBILIZER BYPASS 3X LOCK START/STANDALONE MOD. A/M ALARM CTRL FROM OEM REMOTES DOOR LOCK DOOR UNLOCK ARM OEM ALARM DISARM OEM ALARM POWER LIFTGATE RAP SHUTDOWN CTRL HOOD STATUS (W/OEM SW) DOOR STATUS BRAKE PEDAL STATUS TACHOMETER STATUS PARKING LIGHT CTRL 13-17 2 • • • • • • • • • • • • • • Escape STD key AT* 13-16 2 • • • • • • • • • • • • • • Escape STD key AT* 17-19 3 • • • • • • • • • • • • • • Focus STD key AT 12-13 1 • • • • • • • • • • • • • • Focus STD key AT* 14-15 2 • • • • • • • • • • • • • • Focus STD key AT* 16-18 4 • • • • • • • • • • • • • • Transit Connect STD key AT* 14-18 2 • • • • • • • • • • • • * WARNING: Program unlock before start and relock after shutdown on the remote starter. Failure to comply will result in doorlocks not operating after the vehicle goes into deep sleep (approximately 1 hour). • FORD Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN TRUNK/HATCH RELEASE YEAR C-MAX STD key AT* MAKE MODEL FEATURES www.idatastart.com PAGE 3 OF 24 BOX CONTENTS - 1 OF 1 DOC.: #68054 • 20191206 BOX CONTENTS MODULE T-HARNESS 1 (Accessories sold separately) 10 PIN CONNECTOR VS2 LED 2 BLUE BLACK BLACK 2 4 6 1 3 5 2 1 4 3 6 5 8 7 10 9 12 11 14 13 16 15 18 17 20 19 2 1 4 3 6 5 8 7 10 9 12 11 LED 1 A G F B VS1 PROGRAMMING BUTTON E 4 3 2 1 BLACK RF PORT/ WEBLINK PORT 4 3 2 1 BLUE TELEMATIC PORT 3 2 1 BLACK 9 10 7 8 5 6 3 4 1 2 WHITE MS2 VS3 MS1 C D 12 PIN CONNECTOR VS4 AFTERMARKET HOOD SWITCH AND CABLE WARNING STICKER WEBLINK CABLE (required accessory sold separately) WEBLINK CABLE MODULE WEBLINK PORT COMPUTER USB PORT 4 PIN BLACK CABLE Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 4 OF 24 COMPATIBLE ACCESSORIES - 1 OF 1 DOC.: #68054 • 20191206 RF KIT (accessories sold separately) RF KIT MODULE RF PORT ANTENNA Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 5 OF 24 COMPONENT LOCATOR - 1 OF 1 DOC.: #68054 • 20191206 INTERIOR VIEW D B A C DRIVER SIDE VIEW Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 PASSENGER SIDE VIEW CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 6 OF 24 CONNECTOR COLOR CONNECTOR TYPE POSITION POLARITY MODULE LOCATION COMPONENT LOCATOR CanH C251 White 16 pin 03 Gray/Orange (DATA) OBDII connector C CanL C251 White 16 pin 11 Purple/Orange (DATA) OBDII connector C Parking Light Left C2280A LtGreen 42 pin 01 Yellow/Blue (+) BCM, behind glove box D Parking Light Right C2280A LtGreen 42 pin 26 Brown/Yellow (+) BCM, behind glove box D C2280A LtGreen 42 pin 31 Purple/Green (-) BCM, behind glove box D Driver Door Pin C2280B Brown 60 pin 45 Green/Purple (OPEN) BCM, behind glove box* D Trunk Release C2280B Brown 60 pin 49 Brown (-) BCM, behind glove box D Lock/Unlock C2280C Blue 60 pin 11 Brown (-) BCM, behind glove box D C2280G ~ 02 pin 02 Red (+) BCM, behind glove box D 12-13 Horn 12V * Wire also found in driver door harness. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 WIRE COLOR CONNECTOR NAME YEAR MODEL Focus STD key AT DOC.: #68054 • 20191206 WIRE DESCRIPTION FORD MAKE TYPE 1 - WIRE CHART - 1 OF 1 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 7 OF 24 TYPE 1 - WIRING DIAGRAM - 1 OF 1 DOC.: #68054 • 20191206 IGNITION SWITCH (UNDER STEERING COLUMN) VS2 M1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 1 : IMMOBILIZER CONNECTOR M6 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 M4 1 : IMMOBILIZER HARNESS VS1 MS2 2 VS4 2 : IGNITION CONNECTOR 1 2 : IGNITION HARNESS VS3 OBDII MS1 M3 01 BROWN/BLACK - PARKING LIGHT (-) OUTPUT 02 GRAY (NC) 03 04 05 06 PURPLE/GREEN - LOCK/UNLOCK (-) OUTPUT 07 08 BLUE/GREEN - TRUNK (-) OUTPUT 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 DKGREEN/GREEN (NC) CANH - 03 BROWN/RED 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CANL - 11 BROWN/YELLOW OPTIONAL 1 HORN (-) - 31 1 BCM A 3A PARKING LIGHT LEFT (+) - 01 3A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 PARKING LIGHT RIGHT (+) - 26 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 87 86 87A 85 B 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 DRIVER DOOR PIN (OPEN) - 45 GREEN/WHITE GREEN/PURPLE 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 TRUNK RELEASE (-) - 49 C M4 01 02 03 GRAY/BLACK (NC) 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 LOCK/UNLOCK (-) - 11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 G 10A 12V (+) - 02 A 1 2 G HOOD SWITCH 2 B C INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 2 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 8 OF 24 FORD Escape STD key AT Focus STD key AT CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION POLARITY MODULE LOCATION COMPONENT LOCATOR CanH C251 White 16 pin 03 Gray/Orange (DATA) OBDII connector C C251 White 16 pin 11 Purple/Orange (DATA) OBDII connector C Parking Light Left C2280A LtGreen 42 pin 01 Yellow/Blue (+) BCM, behind glove box D Parking Light Right C2280A LtGreen 42 pin 26 Brown/Yellow (+) BCM, behind glove box D Horn C2280A LtGreen 42 pin 31 Purple/Green (-) BCM, behind glove box D 13-17 Driver Door Pin C2280B Brown 60 pin 45 Green/Purple (OPEN) BCM, behind glove box* D Trunk Release C2280B Brown 60 pin 49 Brown (-) BCM, behind glove box D Lock C2280B Brown 60 pin 36 Gray/Yellow (-) BCM, behind glove box* D Unlock C2280C Blue 60 pin 26 Purple/Gray (-) BCM, behind glove box* D Driver Unlock C2280B Brown 60 pin 55 ~ (-) BCM, behind glove box* D 12V C2280G ~ 02 pin 02 Red (+) BCM, behind glove box D CanH C251 White 16 pin 03 Gray/Orange (DATA) OBDII connector C CanL C251 White 16 pin 11 Purple/Orange (DATA) OBDII connector C Parking Light Left C2280A LtGreen 42 pin 01 LtGreen/Orange (+) BCM, behind glove box D Parking Light Right C2280A LtGreen 42 pin 26 Brown/Yellow (+) BCM, behind glove box D WIRE COLOR WIRE DESCRIPTION C-MAX STD key AT DOC.: #68054 • 20191206 CanL YEAR MODEL MAKE TYPE 2 - WIRE CHART - 1 OF 2 Horn C2280A LtGreen 42 pin 31 Purple/Green (-) BCM, behind glove box D 13-16 Driver Door Pin C2280B Brown 60 pin 45 Green/Purple (OPEN) BCM, behind glove box* D Trunk Release C2280B Brown 60 pin 49 Brown (-) BCM, behind glove box D Lock C2280B Brown 60 pin 36 Gray/Yellow (-) BCM, behind glove box* D Unlock C2280C Blue 60 pin 26 Purple/Gray or Purple/Orange (-) BCM, behind glove box* D Driver Unlock C2280B Brown 60 pin 55 Blue/Brown (-) BCM, behind glove box* D 12V C2280G ~ 02 pin 02 Red (+) BCM, behind glove box D CanH C251 White 16 pin 03 Gray/Orange (DATA) OBDII connector C CanL C251 White 16 pin 11 Purple/Orange (DATA) OBDII connector C Parking Light Left C2280A LtGreen 42 pin 01 Yellow/Blue (+) BCM, behind glove box D Parking Light Right C2280A LtGreen 42 pin 26 Brown/Yellow (+) BCM, behind glove box D Horn C2280A LtGreen 42 pin 31 Purple/Green (-) BCM, behind glove box D 14-15 Driver Door Pin C2280B Brown 60 pin 45 Green/Purple (OPEN) BCM, behind glove box* D Trunk Release C2280B Brown 60 pin 49 Brown (-) BCM, behind glove box D Lock C2280B Brown 60 pin 36 Empty (-) BCM, behind glove box* D Unlock C2280C Blue 60 pin 26 Empty (-) BCM, behind glove box* D Driver Unlock C2280B Brown 60 pin 55 Green/Purple (-) BCM, behind glove box* D C2280G ~ 02 pin 02 Red (+) BCM, behind glove box D 12V * Wire also found in driver door harness. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 9 OF 24 CONNECTOR COLOR CONNECTOR TYPE POSITION POLARITY MODULE LOCATION COMPONENT LOCATOR C251 White 16 pin 03 Gray/Orange (DATA) OBDII connector C C251 White 16 pin 11 Purple/Orange (DATA) OBDII connector C Parking Light Left C2280A LtGreen 42 pin 01 Yellow/Blue (+) BCM, behind glove box D Parking Light Right C2280A LtGreen 42 pin 26 Brown/Yellow (+) BCM, behind glove box D Horn C2280A LtGreen 42 pin 31 Purple/Green (-) BCM, behind glove box D 14-18 Driver Door Pin C2280B Brown 60 pin 45 Green/Purple (OPEN) BCM, behind glove box* D Trunk Release ~ ~ ~ ~ ~ Do not connect ~ Lock C2280B Brown 60 pin 36 Gray/Yellow (-) BCM, behind glove box* D Unlock C2280C Blue 60 pin 26 Purple/Gray (-) BCM, behind glove box* D Driver Unlock C2280B Brown 60 pin 55 Green/Purple (-) BCM, behind glove box* D C2280G ~ 02 pin 02 Red (+) BCM, behind glove box D 12V * Wire also found in driver door harness. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 WIRE COLOR CONNECTOR NAME CanH CanL YEAR MODEL Transit Connect STD key AT DOC.: #68054 • 20191206 WIRE DESCRIPTION FORD MAKE TYPE 2 - WIRE CHART - 2 OF 2 ~ CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 10 OF 24 TYPE 2 - WIRING DIAGRAM - 1 OF 1 DOC.: #68054 • 20191206 IGNITION SWITCH (UNDER STEERING COLUMN) VS2 M1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 1 : IMMOBILIZER CONNECTOR M6 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 M4 1 : IMMOBILIZER HARNESS VS1 MS2 2 VS4 2 : IGNITION CONNECTOR 1 2 : IGNITION HARNESS VS3 OBDII MS1 M3 01 BROWN/BLACK - PARKING LIGHT (-) OUTPUT 02 GRAY (NC) 03 04 05 06 PURPLE/GREEN - LOCK (-) OUTPUT 07 08 BLUE/GREEN - TRUNK (-) OUTPUT 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 DKGREEN/GREEN - UNLOCK (-) OUTPUT CANH - 03 BROWN/RED 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CANL - 11 BROWN/YELLOW OPTIONAL 1 HORN (-) - 31 1 87 BCM A 3A PARKING LIGHT LEFT (+) - 01 3A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 PARKING LIGHT RIGHT (+) - 26 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 86 87A 85 30 B LOCK (-) - 36 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 DRIVER DOOR PIN (OPEN) - 45 GREEN/WHITE GREEN/PURPLE 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 TRUNK RELEASE (-) - 49 DRIVER UNLOCK (-) - 55 2 CONNECT ONLY IF THE 2 WIRE IS PRESENT M4 01 02 03 GRAY/BLACK (NC) 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 C 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 UNLOCK (-) - 26 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 G 10A 12V (+) - 02 A 1 2 G HOOD SWITCH 3 B C INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 3 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 11 OF 24 TYPE 3 - WIRE CHART - 1 OF 1 CONNECTOR COLOR CONNECTOR TYPE POSITION POLARITY MODULE LOCATION COMPONENT LOCATOR 16 pin 03 Gray/Orange (DATA) OBDII connector C White 16 pin 11 Purple/Orange (DATA) OBDII connector C Parking Light Left C2280A LtGreen 42 pin 01 LtGreen/Orange (+) BCM, behind glove box D Parking Light Right C2280A LtGreen 42 pin 26 Brown/Yellow (+) BCM, behind glove box D Horn C2280A LtGreen 42 pin 31 Purple/Green (-) BCM, behind glove box D Driver Door Pin C2280B Brown 60 pin 45 Green/Purple (OPEN) BCM, behind glove box* D Trunk Release C2280B Brown 60 pin 49 Brown (-) BCM, behind glove box D Lock C2280B Brown 60 pin 36 Gray/Yellow (-) BCM, behind glove box* D Unlock C2280C Blue 60 pin 26 Purple/Orange (-) BCM, behind glove box* D Driver Unlock C2280B Brown 60 pin 55 LtBlue/Brown (-) BCM, behind glove box* D 12V C2280G ~ 02 pin 02 Green/Red (+) BCM, behind glove box D Ground C252 Black 06 pin 02 Purple/White (-) Immobilizer harness ignition switch A Immobilizer RX C252 Black 06 pin 03 Purple/Gray (DATA) Immobilizer harness ignition switch A Immobilizer TX * Wire also found in driver door harness. C252 Black 06 pin 04 Yellow/Orange (DATA) Immobilizer harness ignition switch A FORD Escape STD key AT 17-19 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 WIRE COLOR CONNECTOR NAME White C251 YEAR C251 MODEL CanH CanL MAKE WIRE DESCRIPTION DOC.: #68054 • 20191206 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 12 OF 24 TYPE 3 - WIRING DIAGRAM - 1 OF 1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 IGNITION SWITCH (UNDER STEERING COLUMN) RED/BLACK VS2 M1 DOC.: #68054 • 20191206 GROUND (-) - 02 BLACK M6 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 M4 1 : IMMOBILIZER CONNECTOR RX (DATA) - 03 GRAY/RED TX (DATA) - 04 GREEN/RED 6 5 4 3 2 1 VS1 N.C. MS2 2 VS4 2 : IGNITION CONNECTOR 1 2 : IGNITION HARNESS VS3 OBDII MS1 M3 01 BROWN/BLACK - PARKING LIGHT (-) OUTPUT 02 GRAY (NC) 03 04 05 06 PURPLE/GREEN - LOCK (-) OUTPUT 07 08 BLUE/GREEN - TRUNK (-) OUTPUT 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 DKGREEN/GREEN - UNLOCK (-) OUTPUT CANH - 03 BROWN/RED 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CANL - 11 BROWN/YELLOW OPTIONAL 1 HORN (-) - 31 1 87 BCM A 3A PARKING LIGHT LEFT (+) - 01 3A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 PARKING LIGHT RIGHT (+) - 26 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 86 87A 85 30 B LOCK (-) - 36 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 DRIVER DOOR PIN (OPEN) - 45 GREEN/WHITE GREEN/PURPLE 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 TRUNK RELEASE (-) - 49 DRIVER UNLOCK (-) - 55 2 CONNECT ONLY IF THE 2 WIRE IS PRESENT M4 01 02 03 GRAY/BLACK (NC) 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 C 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 UNLOCK (-) - 26 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 G 10A 12V (+) - 02 A 1 2 G HOOD SWITCH 3 B C INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 3 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 13 OF 24 TYPE 4 - WIRE CHART - 1 OF 1 CONNECTOR COLOR CONNECTOR TYPE POSITION POLARITY MODULE LOCATION COMPONENT LOCATOR 16 pin 03 Gray/Orange (DATA) OBDII connector C White 16 pin 11 Purple/Orange (DATA) OBDII connector C Parking Light Left C2280A LtGreen 42 pin 01 Yellow/Blue or Green/Orange (+) BCM, behind glove box D Parking Light Right C2280A LtGreen 42 pin 26 Brown/Yellow (+) BCM, behind glove box D Horn C2280A LtGreen 42 pin 31 Purple/Green (-) BCM, behind glove box D Driver Door Pin C2280B Brown 60 pin 45 Green/Purple (OPEN) BCM, behind glove box* D Trunk Release C2280B Brown 60 pin 49 Brown (-) BCM, behind glove box D Lock C2280B Brown 60 pin 36 Empty or Brown (-) BCM, behind glove box* D Unlock C2280C Blue 60 pin 26 Empty or Brown/Green (-) BCM, behind glove box* D Driver Unlock C2280B Brown 60 pin 55 Green/Purple (-) BCM, behind glove box* D 12V C2280G ~ 02 pin 02 Red (+) BCM, behind glove box D Ground C252 Black 06 pin 05 Black (-) Immobilizer harness ignition switch A Immobilizer RX C252 Black 06 pin 04 Purple/Gray (DATA) Immobilizer harness ignition switch A Immobilizer TX * Wire also found in driver door harness. C252 Black 06 pin 03 Yellow/Orange (DATA) Immobilizer harness ignition switch A FORD Focus STD key AT 16-18 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 WIRE COLOR CONNECTOR NAME White C251 YEAR C251 MODEL CanH CanL MAKE WIRE DESCRIPTION DOC.: #68054 • 20191206 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 14 OF 24 TYPE 4 - WIRING DIAGRAM - 1 OF 1 M2 M3 M1 01 02 03 04 05 06 M2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 IGNITION SWITCH (UNDER STEERING COLUMN) RED/BLACK VS2 M1 DOC.: #68054 • 20191206 TX (DATA) - 03 GREEN/RED M6 RF PORT/WEBLINK PORT M6 TELEMATIC PORT M5 M4 1 : IMMOBILIZER CONNECTOR RX (DATA) - 04 GRAY/RED GROUND (-) - 05 BLACK 6 5 4 3 2 1 VS1 N.C. MS2 2 VS4 2 : IGNITION CONNECTOR 1 2 : IGNITION HARNESS VS3 OBDII MS1 M3 01 BROWN/BLACK - PARKING LIGHT (-) OUTPUT 02 GRAY (NC) 03 04 05 06 PURPLE/GREEN - LOCK (-) OUTPUT 07 08 BLUE/GREEN - TRUNK (-) OUTPUT 09 10 11 GRAY/GREEN - HORN (-) OUTPUT 12 DKGREEN/GREEN - UNLOCK (-) OUTPUT CANH - 03 BROWN/RED 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CANL - 11 BROWN/YELLOW OPTIONAL 1 HORN (-) - 31 1 87 BCM A 3A PARKING LIGHT LEFT (+) - 01 3A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 PARKING LIGHT RIGHT (+) - 26 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 86 87A 85 30 B LOCK (-) - 36 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 DRIVER DOOR PIN (OPEN) - 45 GREEN/WHITE GREEN/PURPLE 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 TRUNK RELEASE (-) - 49 DRIVER UNLOCK (-) - 55 2 CONNECT ONLY IF THE 2 WIRE IS PRESENT M4 01 02 03 GRAY/BLACK (NC) 04 GRAY/WHITE - HOOD STATUS (-) INPUT 05 06 07 08 09 10 C 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 UNLOCK (-) - 26 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 G 10A 12V (+) - 02 A 1 2 G HOOD SWITCH 3 B C INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE. 3 Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 15 OF 24 MODULE PROGRAMMING PROCEDURE (STD KEY) - 1 OF 1 >> IMPORTANT: All vehicle doors and trunk/ hatch must be closed. 06 WARNING: Disconnect power last. Disconnect module from vehicle. DOC.: #68054 • 20191206 12 Turn key to OFF position. ACC ON START OFF 01 Insert key into ignition. ACC Connect module to computer and proceed with extended programming. ON START OFF 03 OFF Turn key to ON position. LED will turn solid RED. 08 IMPORTANT: All vehicle doors and trunk/ hatch must be closed. Connect power first. Connect module to vehicle. Wait, LED will flash GREEN rapidly. (This may take up to 15 seconds) 09 Insert key into ignition. ACC Turn key to OFF position. ON START OFF 05 ACC 11 START Module Programming Procedure completed. START ACC OFF Remove key. OFF 10 14 ON ON OFF ACC Remove key. ACC START ACC 04 13 ON OFF 02 07 ON START Turn key to ON position. LED will turn solid RED. Wait, LED will turn solid GREEN for 2 seconds. (This may take up to 15 seconds) ON START Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com VALET MODE PROGRAMMING PROCEDURE - 1 OF 1 >> NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming. 01 Time restriction. Complete next step within 7 seconds. 02 OFF ACC ON START >> PAGE 16 OF 24 DOC.: #68054 • 20191206 To exit valet mode: repeat steps 1 to 5. Cycle ignition ON five times [5x OFF/ON] rapidly. ENGINE START STOP 03 04 Wait, LED 1 will turn solid RED for 2 seconds. Set ignition to OFF position. OFF ACC ON START ENGINE START STOP 05 Valet Mode Programming Procedure completed. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1 >> WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system. 06 LED 1 will flash GREEN once [1x]. 01 Time restriction. Complete next step within 7 seconds. 07 LED 1 will turn solid RED. Cycle ignition ON five times [5x OFF/ON] rapidly. >> To program additional remotes: repeat steps 4 to 7 using each additional remote. 03 LED 1 will turn solid RED. 08 Wait, LED 1 will turn OFF. 04 Time restriction. Complete next step within 2 seconds from previous step. 09 02 OFF ACC ON START PAGE 17 OF 24 DOC.: #68054 • 20191206 ENGINE START STOP Set ignition to OFF position. OFF ACC ON START ENGINE START STOP 05 Press once [1x] on LOCK button of aftermarket remote. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 10 Aftermarket Remote Programming Procedure completed. CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 18 OF 24 MODULE NAVIGATION PROCEDURE - 1 OF 1 >> It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. To exit the Module Navigation at any time: Follow STEP 13. 04 >> Module must be programmed to the vehicle. 05 >> Use the Module Navigation Chart on the next page. 06 Set ignition to OFF position. 07 TO ACCESS THE MENUS: Press and hold programming button until LED 1 turns solid GREEN. 08 IN THE MENUS: Press the programming button as many times as the menu number indicates. LED 1 will flash GREEN an equal amount of times continuously. 09 01 OFF ACC ON START DOC.: #68054 • 20191206 TO ACCESS THE OPTIONS: Press and hold programming button until LED 1 turns solid RED. 10 IN THE OPTIONS: Press the programming button as many times as the option number indicates. LED 1 will flash RED an equal amount of times continuously. 11 TO ACCESS THE SETTINGS: Press and hold programming button until LED 1 turns solid GREEN. 12 Configure every other setting and proceed to step 13. [Z] LED 1 will flash GREEN as many times as the current (or default) setting number, continuously. 13 MANDATORY: EXIT MODULE NAVIGATION. Press and hold programming button for 7 seconds. LED 1 will flash RED rapidly. Release programming button. LED 1 will turn OFF. [Z] IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED 1 will flash GREEN an equal amount of times continuously. 14 Module navigation completed. To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. >> Failure to exit the Module Navigation will drain vehicle battery. [Y] To save and return to the OPTIONS: Press and hold programming button until LED 1 turns solid RED. [Y] LED 1 will flash RED as many times as the current option number continuously. ENGINE START STOP 02 03 [X] Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 19 OF 24 MODULE NAVIGATION CHART - 1 OF 2 I Default settings are listed in bold. 01 II Make sure the option is covered on the vehicle before attempting to change the setting. 02 03 04 DISARM/UNLOCK BEFORE START RELOCK AFTER START RELOCK AFTER SHUTDOWN FORCE UNLOCK ALL ON FIRST PRESS 05 TAKEOVER 06 N/A 07 01 [Z] SETTINGS [Y] OPTIONS [X] MENUS MODULE NAVIGATION CHART: NOTES FACTORY KEYLESS RS SEQUENCE CONFIGURATION 08 09 DOC.: #68054 • 20191206 MODULE RUN TIME WAIT TO START DELAY 01 OFF 02 ON 01 OFF 02 ON 01 OFF 02 ON 01 OFF 02 ON 01 ENABLE 02 DISABLE* 01 N/A 01 DISABLE 02 N/A 03 LOCK + UNLOCK + LOCK 04 LOCK + LOCK + LOCK 01 03 MIN 02 05 MIN 03 10 MIN 04 15 MIN 05 25 MIN 06 30 MIN 07 35 MIN 08 15 MIN 01 02 SEC 02 05 SEC 03 08 SEC 04 10 SEC 05 15 SEC 06 20 SEC 07 25 SEC 08 30 SEC 10 N/A 01 N/A 11 N/A 01 N/A 12 N/A 01 N/A 13 N/A 01 N/A *Vehicle will shutdown when a door is opened. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com PAGE 20 OF 24 MODULE NAVIGATION CHART - 2 OF 2 14 01 [Z] SETTINGS [Y] OPTIONS [X] MENUS MODULE NAVIGATION CHART: NOTES HORN EVENT TRIGGER CONFIGURATION 15 02-07 Technical Support only 01 DOC.: #68054 • 20191206 HORN CHIRPS WIDTH N/A 01 DOUBLE LOCK 02 LOCK + UNLOCK 03 LOCK + UNLOCK + START 04 DOUBLE LOCK + START 01 30 mSEC 02 15 mSec 03 60 mSec 01 N/A *Vehicle will shutdown when a door is opened. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com [X] NUMBER OF PARKING LIGHT FLASHES DIAGNOSTIC REMOTE STARTER ERROR CODES - 1 OF 1 I WARNING: The following applies only when the parking lights are connected and supported by the system. 01 Engine running. 02 Key in ignition at ON position. II After a remote starter failure, the parking lights will flash three [3x] times, then will flash [X] number times to indicate an error code. See table. 03 N/A 04 Trunk is open. 05 Foot brake is ON. 06 Hood is open. 07 N/A 08 Tach failure. 09 N/A 10 System is in Valet Mode. 11 CAN communication failure 12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence. [Y] NUMBER OF PARKING LIGHT FLASHES DIAGNOSTIC REMOTE STARTER ERROR CODES: NOTES I WARNING: The following applies only when the parking lights are connected and supported by the system. 01 Engine tach signal is lost. 02 N/A II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote. 03 Foot brake is ON. 04 Hood is open. 05 Engine RPM limiter is ON. 06 Glow plug timeout error. 07 Vehicle is moving (VSS). 08 Check engine warning light is ON. 09 Low fuel warning light is ON. 10 N/A 11 CAN communication failure during RS sequence. REMOTE STARTER SHUTDOWN ERROR CODES: NOTES The parking lights will flash four [4x] times, then will flash [Y] number times to indicate an error code. See table. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN PAGE 21 OF 24 DOC.: #68054 • 20191206 www.idatastart.com I II III DURING PROGRAMMING DURING REMOTE START WITH IGNITION OFF Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 DIAGNOSTIC TEST MODULE LED 1 STATUS MODULE DIAGNOSTICS - 1 OF 1 Flashing RED Missing/wrong information from firmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. Solid GREEN then OFF Module correctly programmed. OFF No activity or module already programmed. Flashing RED Module incorrectly programmed. Solid RED Module incorrectly programmed. Flashing GREEN Module correctly programmed and operational. Solid GREEN then OFF Reset in progress. OFF Invalid ground when running status from remote starter. Flashing RED Module incorrectly programmed or connected. Solid RED Module not programmed. Waiting for more vehicle information. Flashing GREEN False ground when running status from remote starter. Solid GREEN then OFF Reset in progress. OFF Module at rest and ready for a remote start sequence. CS-FO(RS)-FO1C-[CMMIXA0]-EN PAGE 22 OF 24 DOC.: #68054 • 20191206 www.idatastart.com MODULE RESET PROCEDURE - 1 OF 1 01 Disconnect all connectors from module except the BLACK 20-PIN connector. 07 Reconnect all connectors. 02 Disconnect the BLACK 20-PIN connector. 08 Repeat programming procedure. 03 PRESS AND HOLD the module’s programming button while connecting the BLACK 20-PIN connector. >> Failure to follow procedure may result with a DTC or a CHECK ENGINE error message. 04 Wait, LED 1 will flash RED. RELEASE programming button. 05 LED 1 will turn RED for 2 seconds. 06 Module RESET completed. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN PAGE 23 OF 24 DOC.: #68054 • 20191206 www.idatastart.com INSTALLATION CHECKLIST - 1 OF 1 PAGE 24 OF 24 DOC.: #68054 • 20191206 CHECKLIST 1 WARNING: Vehicle engine will start many times. Test in a well ventilated area. 2 Close all vehicle doors, hood and trunk. 3 Press the LOCK button once [1x] on the aftermarket keyfob. 9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle. Question 7: Does the vehicle shut down? Question 1: Do the doors lock? ¨ YES: Go to next step. ¨ NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support. RAP and auto light shutdown test ¨ YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 10 ¨ 4 Press the UNLOCK button once [1x] on the aftermarket keyfob. ¨ YES: Go to next step. ¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists. Question 2: Do the doors unlock? Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown? ¨ YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 11 Open hood. ¨ 12 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. 5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported. 13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. Question 3: Does the trunk or hatch open/unlock? Question 9: Does the vehicle remote start? ¨ YES: Close trunk or hatch and go to next step. ¨ NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. Press the AUX 1 button once [1x] on the aftermarket keyfob if supported. 15 Enter vehicle and close the doors. Question 4: Does the driver side sliding door open? 16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. ¨ YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step. 17 Wait for the vehicle to start. ¨ NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. 18 Press brake pedal. 7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported. ¨ YES: Go to next step. 6 ¨ YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. ¨ NO: Go to next step. 14 Close hood. Question 10: Does the vehicle shut down? Question 5: Does the passenger side sliding door open? ¨ YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step. ¨ ¨ NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support. 19 Exit vehicle. 8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle. 20 Installation checklist completed. Question 6: Does the vehicle remote start? ¨ YES: Go to next step. ¨ NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists. Patent No. US 8,856,780 CA 2759622 Automotive Data Solutions Inc. © 2019 CS-FO(RS)-FO1C-[CMMIXA0]-EN www.idatastart.com ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Remote Start
- Data Immobilizer Bypass
- Door Lock/Unlock
- Trunk Release
- Parking Light Control
- Hood Status
- Door Status
- Brake Pedal Status
- Tachometer Status
- A/M Alarm Control
Frequently asked questions
The data immobilizer bypass function allows the remote starter to start the vehicle without having to use the original key fob. This is useful for vehicles that have an immobilizer system that prevents the engine from starting without the proper key.
The ADS-USB accessory is required for firmware flashing. Other accessories, like the CrimeStopper Revostart RF-Kit, are optional.
The device uses a dedicated wire connection to the vehicle's parking light system to remotely control the lights.
This warning is related to the door locks. If you do not program the remote to unlock before starting and relock after shutting down the vehicle, the door locks will not operate after the vehicle goes into deep sleep mode.