Berlinger Fridge-tag 2 L Quick Info

The berlinger Fridge-tag 2 L is a temperature monitoring device designed to help you keep your refrigerator at the ideal temperature. It features a clear LCD display showing the current temperature, date, and time. The device provides alarm warnings when temperatures exceed set limits, allowing you to quickly address potential food spoilage. With the Fridge-tag 2 L, you can monitor temperature history for the past 30 days and even download detailed reports for further analysis.

PDF

Document

QUICK INFO – SET UP
Fridge-tag 2 L
Packaging content
1
2
Fridge-tag information
Temperature
status
Fridge-tag
Profile
(alarm zones)
External sensor
(optional)
30 days
history
Temperature
measured
Int.Sensor
0 0 32
max.
105 &deg;C
Note: If you have ordered a Fridge-tag with an external sensor, place the
external sensor in its predetermined location, before activating the device.
Port to insert
external sensor
Logger ID
Placing the Fridge-tag?
See point 8
3
Set button
To activate the device, press the SET and the READ buttons simultaneously for
more than 3 seconds. The following calendar format will appear: dd.mm.yyyy.
State of delivery
You receive the Fridge-tag in sleep mode. The display
(LCD) is blank.
Note: After approx. 60 seconds without pressing any button of the Fridge-tag
the device goes back into sleep mode. Start from the beginning.
3
3
Note: If required note the date of activation on the back of the Fridge-tag.
4
Read button
Activation of the device
5
Setting the calendar format
Press READ to change the calendar format.
Note: Once the device has been activated, it cannot be stopped anymore.
_ _ dd y y y y
d d __ y y y y
Option 1
Option 2
Setting the calendar
format to: dd.mm.yyyy
Setting the calendar
format to: mm.dd.yyyy
Then press SET to save the calendar format.
3
6
Setting the date and time
7
Activation completed
The READ button is used to adjust the numbers. Each time you press
the READ button, the number in the flashing digit will increase by 1.
As soon as the last digit of the time setting is
confirmed, the activation is completed. Now
place the Fridge-tag. If you have a device with
external sensor, connect the device with the
external sensor. During max. 1 minute after
activation no temperature is displayed on the
screen.
3
The SET button is used to save the number. After pressing the SET
button, the next digit will start flashing.
1 0 02 2 0 1 8
The 1st digit is flashing:
Press READ until &laquo; &raquo; appears as the first digit.
Press SET to save the digit.
Go on with the next digits in the same way until date and
time is set.
Correct or change settings?
See user manual in chapter &laquo;Learn More&raquo;
8
Connection error?
See user manual in chapter &laquo;Learn More&raquo;
Placing the Fridge-tag
The activated Fridge-tag must be placed immediately in its predetermined
location. It is recommended and important to place the device in the centre
of the refrigerator for an optimal temperature observation.
External sensor
Two hours before activating the device the external
sensor must be placed in its predetermined location. It
is recommended and important to place the external
sensor in the centre of the refrigerator for an optimal
temperature observation and to avoid any incorrect
measurements when starting the device.
Placing the Fridge-tag?
See user manual in chapter &laquo;Learn More&raquo;
Learn More
Fridge-tag
Support
Berlinger
Website
User Manual Product information
Video
Technical
Specification
Scan the QR code
or click on
www.berlinger.com/
support/fridge-tag-2-l
QUICK INFO – USER GUIDE
Fridge-tag 2 L
Temperature status
1
Indication of an alarm display
Indication of an OK display
In measurement mode, when no alarm has been triggered, the following information is indicated:
The OK symbol
1 6 02 2 0 1 8
1 3 47
Int.Sensor
56 &deg;C
In measurement mode, when an alarm has been triggered, the following information is indicated
The upper/lower
The additional
Alarm indicator
warning symbol
1 6 02 2 0 1 8
The alarm
symbol
The current
temperature
! 1 5 42
The current
temperature
Int.Sensor
88 &deg;C
The current date
and time
Alarm display and confirmation options?
See user manual in chapter &laquo;Learn More&raquo;
The current date and time
2
Reading the history
Example of an alarm display
Example of an OK display
The alarm and the
warning symbol
The corresponding
flashing arrow
The OK
symbol
1
1 6 02 2 0 1 8
!
Press
READ
once
1 8 21
1
Int.Sensor
0 0 32
The time duration out of
the preset temperature
high limit
max.
105 &deg;C
Press
READ
once
The data and time of the alarm
The highest recorded temperature of that day
The corresponding flashing alarm indicator
Acknowledge alarm and buzzer details?
See user manual in chapter &laquo;Learn More&raquo;
Alarm display: additional information
3
Download reports
Int.Sensor
0 32
max.
105 &deg;C
Press READ a second time for additional
information.
2
Connect the device via USB with your
PC/MAC.
Note: Continue repetitively pressing the READ button to read out the details
of the past 30 days.
Note: Disconnect the external sensor
from the device first.
Int.Sensor
0 32
max.
105 &deg;C
Press and hold READ for 3 seconds for the AlarmSuper-Jump Function
Note: Press and hold the READ button again for at least 3 seconds and the
next alarm event will appear on the screen.
The Fridge-tag will now generate a PDF and an ASCII report. This process can
take up to 2 minutes.
Acknowledge alarm?
See user manual in chapter &laquo;Learn More&raquo;
Download reports?
See user manual in chapter &laquo;Learn More&raquo;
For more information click on
www.berlinger.com/support/fridge-tag-2-l
Berlinger &amp; Co. AG
Mitteldorfstrasse 2
9608 Ganterschwil
Switzerland
Tel. +41 71 982 88 11
[email protected]
www.berlinger.com
400-01230_1
">

Hello! I am an AI chatbot specifically trained to assist you with the berlinger Fridge-tag 2 L Quick guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Temperature monitoring
Alarm system
30 days history
Report download
External sensor

Frequently asked questions

To activate the Fridge-tag, press the SET and READ buttons simultaneously for more than 3 seconds. The calendar format will appear on the screen. Follow the instructions on the device to set the date and time. Once the activation is complete, place the Fridge-tag in the center of your refrigerator for optimal temperature monitoring.

The Fridge-tag displays different alarm warning symbols. An upper/lower warning symbol indicates that the temperature has exceeded either the upper or lower temperature limits. The alarm symbol indicates that a temperature alarm has been triggered.

To download reports, connect the Fridge-tag to your PC/MAC via USB. The Fridge-tag will generate a PDF and an ASCII report containing temperature data. The download process can take up to 2 minutes. Make sure to disconnect the external sensor from the device first.