Berlinger Fridge-tag Ultra Low Quick Info

The berlinger Fridge-tag Ultra Low is a device designed to monitor temperature in ultra-low freezers. It features a user-friendly interface for setting up the device, viewing temperature readings, and accessing historical data. With an alarm function and a history log, the Fridge-tag Ultra Low helps ensure the integrity of your valuable samples.

PDF

Document

QUICK INFO – SET UP
Fridge-tag Ultra Low
1
Packaging content
2
Fridge-tag information
Profile
(alarm zones)
30 days
history
Temperature
status
Port to insert
external sensor
Temperature
measured
Fridge-tag
Int.Sensor
External sensor
0 0 32
max.
. &deg;C
-773
105
Note: Place the external sensor in its
predetermined location, before activating the
device.
Placing the Fridge-tag?
See point 8
3
Set button
33 3
Note: If required note the date of activation on
the back of the Fridge-tag.
4
Logger ID
To activate the device, press the SET and the READ
buttons simultaneously for more than 3 seconds. The following calendar format will appear:
dd.mm.yyyy.
State of delivery
You receive the Fridge-tag
in sleep mode. The display
(LCD) is blank.
Read button
Activation of the device
Note: After approx. 60 seconds without pressing
any button of the Fridge-tag the device goes back
into sleep mode. Start from the beginning.
5
Setting the calendar format
Press READ to change the calendar format.
Option 1
Note: Once the device has been activated, it cannot be stopped anymore.
_ _ dd y y y y
Setting the calendar
format to: dd.mm.yyyy
Option 2
d d __ y y y y
Setting the calendar
format to: mm.dd.yyyy
3
Then press SET to save the calendar format.
6
Setting the date and time
7
Activation completed
The READ button is used to adjust the
numbers. Each time you press the READ
button, the number in the flashing digit
will increase by 1.
The SET button is used to save the number. After pressing the SET button, the
next digit will start flashing.
3
As soon as the last
digit of the time setting is
confirmed, the activation is completed. Now
place the Fridge-tag and
connect the device with
the external sensor.
The 1st digit is flashing:
1 0 02 22
02
10
81
During max. 1 minute
after activation no temperature is displayed on
the screen.
Press READ until “ ”
appears as the first digit.
Press SET to save the digit.
Go on with the next digits
in the same way until date
and time is set.
8
Correct or change settings?
See user manual in chapter &laquo;Learn More&raquo;
Connection error?
See user manual in chapter &laquo;Learn More&raquo;
Placing the Fridge-tag
Learn More
30 minutes before activating the
device the external sensor must
be placed in its predetermined
location. It is recommended and
important to place the external
sensor in the centre of the freezer
(where goods are also stored)
for an optimal temperature
observation and to avoid any
incorrect measurements when
starting the device.
Note: Pay attention to your safety and
protection when installing the external sensor
in your freezer and follow your organization’s
instructions for proper handling at ultra-low
temperatures.
Placing the Fridge-tag?
See user manual in chapter &laquo;Learn More&raquo;
Fridge-tag
Support
User
Manual
Berlinger
Website
Technical
Specification
Product
Information
For more information scan the QR code or click on
www.berlinger.com/fridge-tag-ult
QUICK INFO – USER GUIDE
Fridge-tag Ultra Low
1
Temperature status
Indication of an alarm display
In measurement mode, when an alarm has been
triggered, the following information is indicated:
Indication of an OK display
In measurement mode, when no alarm has been
triggered, the following information is indicated:
The alarm
symbol
Additional
Upper/lower
warning symbol alarm indicator
The current
temperature
The OK symbol
1 6 02 22
02
10
81
! 1 5 42
Int.Sensor
88
. &deg;C
-773
Int.Sensor
1 6 02 22
02
10
81
. &deg;C
56
-773
1 3 47
The current
date and time
Alarm display and confirmation options?
See user manual in chapter &laquo;Learn More&raquo;
The current date and time
2
The current
temperature
Reading the history
Example of an alarm display
Example of an OK display
The alarm and the
warning symbol
The OK symbol
Int.Sensor
0 0 32
The time
duration out
of the preset
temperature
high limit
max.
-773
105. &deg;C
1
1 6 02 2 2
02
10
81
1
!
Press
READ
once
1 8 21
Press
READ
once
The date and
time of the
alarm
The
corresponding
The highest flashing arrow
recorded
temperature
of that day
Alarm display: additional information
The corresponding
flashing alarm
indicator
Acknowledge alarm and buzzer details?
See user manual in chapter &laquo;Learn More&raquo;
3
Download reports
Int.Sensor
0 32
max.
. &deg;C
105
-773
Press READ a second
time for additional
information.
2
Connect the device via
USB with your PC/MAC.
Note: Continue repetitively pressing the READ
button to read out the details of the past 30 days.
Int.Sensor
0 32
max.
105
. &deg;C
-773
Note: Disconnect the
external sensor from
the device first.
Handle the cable of
the external sensor
with care! Prevent that
it is folded or bended.
Press and hold READ for
3 seconds for the AlarmSuper-Jump function
Note: Press and hold the READ button again for
at least 3 seconds and the next alarm event will
appear on the screen.
The Fridge-tag will now generate a PDF and an
ASCII report. This process can take up to 2 minutes.
Acknowledge alarm?
See user manual in chapter &laquo;Learn More&raquo;
Download reports?
See user manual in chapter &laquo;Learn More&raquo;
proven and
well-known
quality
Berlinger &amp; Co. AG
Mitteldorfstrasse 2
9608 Ganterschwil
Switzerland
Tel. +41 71 982 88 11
[email protected]
www.berlinger.com
400-01269_1
">

Hello! I am an AI chatbot specifically trained to assist you with the berlinger Fridge-tag Ultra Low Quick Info. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Temperature monitoring
Alarm functionality
Data logging
User friendly interface
External sensor
USB connectivity

Frequently asked questions

To activate the device, press the SET and READ buttons simultaneously for more than 3 seconds. The calendar format will appear on the screen. You can then set the date and time using the READ and SET buttons.

The alarm symbol indicates that the temperature has exceeded the preset limit. The alarm will sound and the display will show additional information about the alarm event.

Connect the device via USB to your PC/MAC and the Fridge-tag Ultra Low will generate a PDF and ASCII report. This process can take up to 2 minutes. Remember to disconnect the external sensor from the device first.