Magnavox | MDR513H | Owner`s manual | Magnavox MDR513H Owner`s manual

Introduction
Owner's Manual
Playback
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Recording
NEED HELP FAST?
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING
YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT WWW.MAGNAVOX.COM/SUPPORT
OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.
Basic Setup
THANK YOU FOR CHOOSING MAGNAVOX.
Connections
MDR513H / F7
HDD & DVD PLAYER / RECORDER
WITH DIGITAL TUNER
Editing
Function Setup
Others
Español
© 2011 Funai Electric Co., Ltd.
SAFETY INFORMATION
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.
Model No.:
Serial No.:
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The important note is located on the rear or bottom of
the cabinet.
The symbol for CLASS ll (Double Insulation)
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the
authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
2
EN
SAFETY INFORMATION
Introduction
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
Connections
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlocks defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
Basic Setup
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
Recording
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
Playback
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
Editing
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Function Setup
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
• For product recycling information, please visit - www.magnavox.com
Notice for Progressive Scan Output
Others
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 480 progressive scan output, it
is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 480p DVD recorder, please contact our customer service center.
Español
EN
3
SAFETY INFORMATION
Supplied Accessories
remote control (NB820UD) with AA (1.5 V) battery x2
Cleaning the cabinet
• Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean
the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the
unit.
Cleaning discs
RF coaxial cable
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
Cleaning the disc lens
RCA audio/video cables
• If this unit still does not perform properly
although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
Disc handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is
not used.
owner’s manual (EN/FR)
quick guide (EN/FR)
HDD handling
• HDD is a precision apparatus that is susceptible
to vibration, strong impact or dirt. Depending on
the installation environment or handling, the unit
may become partially damaged or in the worst
case, recording or replaying may not be available.
Especially while the HDD is in motion, do not subject
it to vibration or strong impact or pull out the power
plug. And if a power failure occurs, the content of the
recording / replaying program may be lost.
• HDD rotates at high speed when in operation. Be sure
that rotation has stopped and then move the unit
without subjecting it to strong impact or vibration.
IR signal check
Maintenance
Servicing
• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 114-118 before returning the product.
• If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable
parts inside. Turn the unit to the standby mode, unplug
the power plug and please call our help line mentioned
on the front page to locate an Authorized Service
Center.
4
EN
If the remote control does not work properly, you can test
if the remote control sends out the infrared signal with
a digital camera (including built-in camera of cellular
phone). It will help to define the cause of malfunction.
With a digital camera (including built-in camera of
cellular phone):
Direct a digital camera to remote control, press
and hold a button on remote control. If infrared
light appears through digital camera, the remote
control is working.
SAFETY INFORMATION
Introduction
Trademark Information
is trademark of Eastman Kodak Company.
Connections
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
Dolby® Digital Stereo Creator
Basic Setup
Recording
“Dolby® Digital Stereo Creator enables consumers to create stereo DVD-Videos with stunning Dolby Digital sound
tracks at home. The technology, when utilized instead of
PCM recording, also saves recordable disc space, allowing
for higher video resolution or extended recording time
on each DVD. DVDs mastered using Dolby Digital Stereo
Creator will play back on all DVD-Video players.”
Note: This is true when the players are compatible with
actual recordable DVD discs.
Playback
Editing
Function Setup
MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co. Ltd. and Funai
Corporation, Inc. under license from Philips Electronics North America.
© 2011 Funai Electric Co., Ltd.
Others
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is
strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
EN
Español
with the
design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without
the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
5
CONTENTS
Introduction
Recording
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .9
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 10
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
INFORMATION ON RECORDING . . . . . . . . . . . . . . . . . .
BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . .
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording the DTV Closed Caption . . . . . . . . . . . . . . . .
Recording from a Cable Box or Satellite . . . . . . . . . . . .
BASIC RECORDING &
ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . .
AUTOSTART RECORDING . . . . . . . . . . . . . . . . . . . . . . . .
TIMER RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . .
SPECIAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overwriting from the Beginning of the Title. . . . . . . .
Overwriting in the Middle of the Title . . . . . . . . . . . . . .
Hints for Overwriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Information on Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . .
Settings for an External Device . . . . . . . . . . . . . . . . . . . .
Recording from an External Device . . . . . . . . . . . . . . . .
Information on DV Dubbing . . . . . . . . . . . . . . . . . . . . . . .
DVC to HDD / DVD Dubbing . . . . . . . . . . . . . . . . . . . . . . .
Selected Title Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . .
One Title Dubbing (HDD to DVD only) . . . . . . . . . . . . .
PROTECTING A DISC. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PLAYING THE DISCS ON OTHER DVD PLAYERS . . . .
Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auto Finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connections
CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antenna Connection (Required) . . . . . . . . . . . . . . . . . . .
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting to a TV Using Audio / Video Jacks . . . . . .
Connecting to a TV Using the S-Video Out Jackk . . . .
Connecting to a TV Using
Component Video Out Jacks . . . . . . . . . . . . . . . . . . . . . .
Connecting to a TV with an HDMI
Compatible Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting to a Cable / Satellite Box . . . . . . . . . . . . . . .
Connecting to a TV without Audio / Video Jacks . . . .
Digital Audio Connection. . . . . . . . . . . . . . . . . . . . . . . . . .
15
15
15
16
17
17
18
19
20
21
Basic Setup
BEFORE YOU START . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finding the Viewing Channel on Your TV
V ..........
Guide to On-Screen Display / Menu . . . . . . . . . . . . . . . .
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching HDD / DVD Mode . . . . . . . . . . . . . . . . . . . . . . .
How to Insert a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHANNEL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auto Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding / Deleting Channels. . . . . . . . . . . . . . . . . . . . . . . .
SETTING THE CLOCK
K ............................
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching Analog Mode /
Digital Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
EN
22
22
23
25
27
27
28
29
29
30
32
32
34
34
35
35
35
36
38
39
41
43
43
43
43
43
44
46
47
50
51
51
51
52
53
53
54
55
56
57
59
61
62
63
63
64
CONTENTS
Introduction
Editing
65
67
67
68
Recording
Function Setup
Playback
LIST OF SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Editing
70
71
71
72
72
72
72
72
73
73
73
73
74
74
75
75
75
76
76
77
77
77
78
79
79
79
80
80
80
INFORMATION ON EDITING. . . . . . . . . . . . . . . . . . . . . . 81
Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Edit Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
How to Access the Edit Menu. . . . . . . . . . . . . . . . . . . . . . 82
EDITING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Deleting a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Deleting Selected Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Chapter Marks (Add) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Chapter Marks (Delete) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Chapter Marks (Delete All). . . . . . . . . . . . . . . . . . . . . . . . . 89
Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Deleting a Scene of a Title . . . . . . . . . . . . . . . . . . . . . . . . . 91
Protecting a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Setting an Index Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Erasing Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Making Edits Compatible . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Deleting All Titles in HDD. . . . . . . . . . . . . . . . . . . . . . . . . . 99
Basic Setup
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . .
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . .
Playing Back an Audio CD and a CD-RW/-R with
MP3 / JPEG Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . .
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fast Forward / Fast Reverse Playback. . . . . . . . . . . . . . .
Variable Skip / Variable Replay . . . . . . . . . . . . . . . . . . . . .
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slow Forward / Slow Reverse Playback . . . . . . . . . . . . .
Chasing Playback during Recording . . . . . . . . . . . . . . .
Simultaneous Playback and Recording. . . . . . . . . . . . .
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing Back the Autostart Recording . . . . . . . . . . . . .
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SELECTING THE FORMAT OF AUDIO AND VIDEO . .
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . .
Switching Virtual Surround System . . . . . . . . . . . . . . . .
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . .
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connections
Playback
Others
Function Setup
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Español
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover
Others
Español
EN
7
FEATURES
This unit not only plays back the contents on internal HDD, DVD, or CD, but also offers features for you to record on
HDD or DVD and edit them after that. The following features are offered with this unit.
Recording
This unit allows you to record on the HDD, a DVD+RW/RW (rewritable) and a DVD+R/-R (one-time write). You can
choose any one for your convenience. Even if you choose
DVD-RW/-R, these discs will automatically be recorded in
the DVD+VR mode.
HDD
DVD
Up to 36 program recording:
You can program the unit to record up to 36 programs
within a one-month period. Daily or weekly program
recordings are also available.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer. Every
time [REC] is pressed during recording, the recording
time will be increased by 30 minutes up to 6 hours. The
recording automatically stops when the recording time
you set is reached or the disc is full.
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set before
attempting to record.
Automatic title list making:
The unit makes a title list with the index automatically.
Left channel stereo recording:
This unit can record the sound of the left channel
monaural input as left and right channels automatically
(the input from the L2 jacks only).
HDD
320 GB hard disk:
This unit is equipped with a 320GB hard disk which allows
you to record up to 387 hours (with SLP mode).
Autostart recording:
Every time you turn on this unit, this unit automatically
records the channel currently viewed and temporarily
stores the recorded content to the HDD. By using this
function, you can pause or go back to the TV program you
are currently watching, and you can also start recording the
whole TV program even at the middle of the TV program.
DVD
Automatic title finalizing (DVD+R/DVD-RW/-R only):
You can finalize discs automatically after finishing all
timer recordings or at the end of the disc space if you set
this in the main menu.
Alternate recording:
In the following cases, the unit will detect it and
automatically record to the HDD even when DVD is
selected as the recording media.
- If there is no recordable disc in the unit
- If the disc does not have enough space to complete the
recording
- If the material is “copy-once” program and prohibited to
be recorded on a DVD
- If the disc is not available because the repairing process
is canceled halfway
This feature is available only for timer recording. Not
available for one-touch timer recording.
All high definition (HD) pictures will be converted down
to Standard Definition, when recording on the HDD or
DVD.
8
EN
Dubbing
With this unit, you can enjoy bi-directional dubbing
between HDD and DVD.
HDD
DVD
High speed dubbing (HDD ➔ DVD only):
If you dub a title recorded in SLP mode to DVD+R/-R,
dubbing speed will be 24 times at the maximum.
Auto recording mode dubbing:
When dubbing, if you set the recording mode to “Auto”,
the recording mode will automatically be adjusted so the
titles will fit nicely in the remaining space of the disc.
DV dubbing:
This function helps you to easily dub the contents of the
DVC (digital video camcorder) to HDD/DVD.
Playback
HDD
DVD
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder
which is compatible with Dolby Digital, you can
experience the theater surround sound from discs with
surround sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search functions. You can search for a desired point by
title, chapter or time.
Virtual surround system:
You can enjoy stereophonic space through your existing 2
channel stereo system.
Variable skip:
You can skip forward a certain time, which is specified
in “Playback” menu in advance, with one-touch while
playback.
Variable replay:
You can skip back a certain time, which is specified in
“Playback” menu in advance, with one-touch while
playback.
HDD
Chasing playback during recording and simultaneous
playback and recording:
You can play back the already recorded part of the current
recording or another title during recording.
DVD
Playing back MP3/JPEG/Kodak Picture CD files:
You can enjoy MP3/JPEG/Kodak Picture CD files which are
recorded on CD-RW/-R.
FEATURES
Symbols Used in this Owner's Manual
HDD
Others
Description refers to DVD+RW
Description refers to DVD+R
Description refers to DVD-RW
Description refers to DVD-R
For Playback only
Description refers to DVD-video
Description refers to audio CD
Description refers to video CD with PBC function
Description refers to video CD without PBC
function
Description refers to CD-RW/-R with MP3 files
Description refers to CD-RW/-R with JPEG files
(Kodak Picture CD files included)
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
Editing
Function Setup
HDD
DVD
Progressive scan system:
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and images in higher
resolution than that of traditional television signals.
HDMI (High-Definition Multimedia Interface)
You can enjoy clearer audio/video output when
connecting this unit to a display device with an HDMIcompatible port.
Description refers to HDD
Playback
DVD
Available for playing back discs on a regular DVD
player:
Recorded discs can be played back on regular DVD
players, including computer DVD drives compatible
with DVD-video playback. Although DVD+R are playable
on other units without finalization in most cases, it
is recommended to finalize in order to stabilize the
performance. For DVD-RW/-R, you need to finalize the
recorded discs to play back on other DVD players.
For Recording, Playing Back, and Editing
Recording
Compatibility
Symbol Description
Basic Setup
DVD
Hiding chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
Setting an index pictures:
You can change pictures for an index.
Putting name on disc:
You can put your favorite disc name.
To specify for which media type each function is, we put
the following symbols at the beginning of each item to
operate.
* DVD-RW/-R recorded in VR mode or non compatible
recording format are not playable.
* DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc (refer to page 97).
* DVD-R recorded in the mode other than +VR is not
recordable on this unit.
Connections
HDD
DVD
Deleting a title:
You can delete a title which you do not need anymore.
Putting names on titles:
You can put your favorite names on titles.
Setting / clearing chapter marks:
You can set / clear chapter marks on titles.
Dividing titles:
You can divide a title into 2 or more.
Deleting a scene of a title:
You can delete a scene from a title as you like.
Introduction
Editing
Available for a disc that is not finalized or DVD+RW.
Others
Español
EN
9
FUNCTIONAL OVERVIEW
Front Panel
1
2
3*
4
5
15
6
7 8* 9
10
14 13 12 11
(*) The unit can also be turned on by pressing these buttons.
1. y STANDBY-ON button
Press to turn on the unit, or to turn the unit to the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord)
2. Disc tray
Place a disc when opening the disc tray.
3. A OPEN/CLOSE button*
Press to open or close the disc tray.
4. Display
Refer to “Front Panel Display” on page 14.
5. HDD button
Press to select the HDD output mode.
6. DVD button
Press to select the DVD output mode.
7. C STOP button
Press to stop playback or recording.
8. B PLAY button*
Press to start or resume playback.
9. I RECORD button
Press once to start a recording. Press repeatedly to
start one-touch timer recording.
10
EN
10. CHANNEL / buttons
Press to change the channel up and down.
11. DV-IN jack (L3)
Use to connect the DV output of external device with
a DV cable.
12. AUDIO input jacks (L2)
Use to connect external device with an RCA audio
cable.
13. VIDEO input jack (L2)
Use to connect external device with an RCA video
cable.
14. S-VIDEO input jack (L2)
Use to connect the S-video output of external device
with an S-video cable.
15. Infrared sensor window
Receive signals from your remote control so that you
can control the unit from a distance.
FUNCTIONAL OVERVIEW
Introduction
Rear Panel
1 2
4
3
VIDEO VIDEO
IN
OUT
IN
5
Y
L
L
Connections
OUT
R
ANTENNA
12
AUDIO IN
(L1)
IN
R
S VIDEO AUD O OUT
11 10 9
OUT
COAXIAL
S VIDEO
8
7
6
Recording
8. COMPONENT VIDEO OUTPUT jacks
Use to connect a TV monitor with component video
inputs with a component video cable.
9. AUDIO OUT jacks
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
10. S-VIDEO IN jack (L1)
Use to connect the S-video output of external device
with an S-video cable.
11. AUDIO IN jacks (L1)
Use to connect external device with an RCA audio
cable.
12. ANTENNA OUT jack
Use to connect an RF coaxial cable to pass the signal
from the ANTENNA IN to your TV.
Basic Setup
Playback
1. ANTENNA IN jack
Use to connect an antenna.
2. VIDEO IN jack (L1)
Use to connect external device with an RCA video
cable.
3. VIDEO OUT jack
Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
4. HDMI OUT jack
Use an HDMI cable to connect to a display with an
HDMI compatible port.
5. AC Power Cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
shut down the unit.
6. DIGITAL AUDIO OUTPUT (COAXIAL) jack
Use to connect an AV receiver, Dolby Digital decoder
or other device with a digital audio coaxial input jack
with a digital audio coaxial cable.
7. S-VIDEO OUT jack
Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
Editing
Function Setup
Others
Español
EN
11
FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote Control
Install the 2 AA (1.5 V) batteries matching the polarity
indicated inside battery compartment of the remote
control.
1
Open the cover.
2
Insert batteries.
Using a Remote Control
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote controls for different devices can interfere
with each other. Avoid using remote controls for other
devices located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of the center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
30˚
16feet (5m)
30˚
23feet (7m)
16feet (5m)
Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.
3
17
1
Close the cover.
STANDBY ON DTV/TV
SOURCE
OPEN/
CLOSE
18*
2
@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
CHANNEL
19
3
4
20
SETUP
Note
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc) batteries.
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
12
EN
6
HDMI
5
21
D SC MENU
TITLE
7
8
OK
24
RETURN
D SPLAY
9
25
V.REPLAY
11
13*
22
23
V SKIP
10
26
12
27
28
RAPID PLAY
14
29
D DUBBING
HDD
DVD
T MER
REC MODE
REC
15
16
31
33
30
32
34
FUNCTIONAL OVERVIEW
Basic Setup
Recording
Playback
Editing
Function Setup
• Press to change the channel up and down.
20. CLEAR button
• Press to clear the information once entered, to clear
the marker settings, or to cancel the programming
for CD, etc.
21. HDMI button
• Press to set the HDMI connector’s video signal
output mode.
22. REPEAT button
• Press to display the repeat menu.
23. TITLE button
• Press to display the title list.
24. OK button
• Press to confirm or select menu items.
25. RETURN button
• Press to return to the previously displayed menu
screen.
26. NEXT G button
• During playback, press to skip to the next chapter,
track or file.
• When playback is in pause, press repeatedly to
forward the playback step by step.
27. V.SKIP button
• Skips by the amount of time set in advance.
28. FFW D button
• During playback, press to fast forward the playback.
• When playback is in pause, press to slow forward
the playback.
29. PAUSE F button
• Press to pause playback or recording.
30. STOP C button
• Press to stop playback or recording.
• Press to exit from the title list.
31. DVD button
• Press to select the DVD output mode.
32. HDD button
• Press to select the HDD output mode.
33. REC button
• Press once to start a recording.
• Press repeatedly to start the one-touch timer
recording.
34. REC MODE button
• Press repeatedly to switch the recording mode.
Connections
Others
Español
1. DTV/TV button
• Press to switch between digital TV (DTV) mode and
analog TV (TV) mode.
2. STANDBY-ON y button
• Press to turn on the unit, or to turn the unit to the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord)
3. Number/Character buttons
• Press to select channel numbers.
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the main
menu.
• Press to enter title names.
4. • button
Digital mode:
• Press to confirm the major / minor channel selection
made by [the Number buttons].
5. SETUP button
• Press to display the main menu.
• During playback, press and hold for more than 3
seconds to switch the progressive scanning mode
to the interlace mode.
6. AUDIO button
• Press to switch the audio language for digital TV.
• Press to display the audio menu during playback.
7. DISC MENU button
• Press to display the disc menu.
8. Cursor K / L / { / B buttons
• Press to select items or settings.
9. DISPLAY button
• Press to turn the display menu on or off.
10. PREV H button
• During playback, press to return to the beginning of
the current chapter, track or file.
• When playback is in pause, press repeatedly to
reverse the playback step by step.
11. V.REPLAY button
• Replays by the amount of time set in advance.
12. REW E button
• During playback, press to fast reverse the playback.
• When playback is in pause, press to slow reverse
the playback.
13. PLAY B button*
• Press to start playback or resume playback.
14. RAPID PLAY button
• During playback, press to play back in a slightly
faster/slower mode while keeping the sound
output.
15. D.DUBBING button
• During playback, press to start dubbing right away.
• In stop mode, press to display “Dubbing” menu.
16. TIMER button
• Press to display the timer programming list.
17. SOURCE button
• Press to select the appropriate input.
18. OPEN/CLOSE A button*
• Press to open or close the disc tray.
19. CHANNEL / buttons
Introduction
(*) The unit can also be turned on by pressing these buttons.
EN
13
FUNCTIONAL OVERVIEW
Front Panel Display
2
1
PM
3
DTV
DB HDD
DVD
4
5
1.
PM
4. Current status of the unit
: Appears in the afternoon
with the clock display.
: Appears when playback is
paused.
2.
DTV
: Appears when playing back
an HDD or disc.
: Appears when the channel
is in DTV mode.
: • Appears when the timer
programming or OTR has
been set and is
proceeding.
• Flashes when timer
programming was not
executed because of some
error.
3. Title /track /file and chapter mark
: Appears when indicating a
title / track / file number.
: Appears when indicating a
chapter number.
5. Displays the following
• Elapsed playback time
• Current title / chapter / track /file
number
• Recording time / remaining time
• Clock
• Channel number
• Remaining time for one-touch
timer recording
• Selected HDMI output mode
: • Appears during recording
process.
• Flashes when a recording
pauses.
: Appears when a disc is in
this unit.
DB
: Appears during dubbing.
HDD
: Appears when the unit is in
HDD mode.
DVD
: Appears when the unit is in
DVD mode.
Display Message
Appears when the disc tray is
opening.
Appears when HDMI output
mode (480p) is selected.
Appears when the disc tray is
closing.
Appears when HDMI output
mode (720p) is selected.
Appears when a disc is loaded
on the disc tray.
Appears when HDMI output
mode (1080i) is selected.
Appears when data is being
recorded on a disc.
Appears when HDMI output
mode (1080p) is selected.
Appears when the PBC function
is activated. (Video CD playback
only. Refer to page 66.)
14
EN
CONNECTION
Introduction
Read this first:
1) Disconnect the AC power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) After making all the connections, connect the AC power cords of the devices.
Antenna Connection (Required)
IN
V DEO
N
Basic Setup
rear of this unit
RF coaxial
cable
IDE
OUT
L
OUT
R
ANTENNA
UDIO N
(L )
IN
S VIDEO UD O OU
OUT
COAX AL
S VIDEO
ANT. IN
This connection is for
TV pass through only
IN
VHF / UHF
antenna
Recording
OUT
ANTENNA
Connections
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
• When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
or
RF coaxial
cable
cable TV
company
Playback
Choose one of the following connections
depending on the jacks on your TV.
Note
Function Setup
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
Please purchase the rest of the necessary cables at your local store.
Overview
If Your TV has
HDMI IN
COMPONENT VIDEO IN
Standard
Quality
R
L
AUDIO IN VIDEO IN
page
18
If you are using
cable / satellite box
page
19
page
17
page
17
page
16
If your device has
only an ANT. IN jack
ANT. IN
Español
S-VIDEO IN
Refer to
Others
Higher
Quality
Editing
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before
moving the unit.
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be
more effective than set-top versions.
• ANTENNA OUT jack is for tuner pass through only. HDD / DVD playback through the RF is not possible.
page
20
EN
15
CONNECTION
Connecting to a TV Using Audio / Video Jacks
VIDEO IN
RCA video cable
VIDEO
OUT
AUDIO IN
L
L
RCA audio cable
R
R
AUDIO OUT
rear of this unit
V DEO VIDEO
N
OUT
N
Y
L
OUT
R
ANTENNA
AUDIO IN
(L )
N
R
VIDEO AU IO O T
OUT
COAXIAL
ANT. IN
V DEO
This connection is for
TV pass through only
RF coaxial
cable
VHF / UHF
antenna
IN
OUT
ANTENNA
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
16
EN
RF coaxial
cable
or
cable TV
company
CONNECTION
Introduction
Connecting to a TV Using the S-Video Out Jack
AUDIO IN
VIDEO
OUT
L
Connections
RCA audio cable
L
R
S-VIDEO IN
S-video cable
R
OUT
AUDIO OUT
S-VIDEO
ANT. IN
V DEO VIDEO
IN
OUT
IN
VHF / UHF
antenna
IN
RF coaxial
cable
Y
L
OUT
R
AUDIO IN
ANTENNA
(
)
R
N
OUT
-V DEO A D O UT
COAX AL
-VIDEO
OUT
Basic Setup
RF coaxial
cable
rear of this unit
This connection is for
TV pass through only
or
Recording
cable TV
company
ANTENNA
Connecting to a TV Using Component Video Out Jacks
AUDIO IN
Playback
L
RCA audio cable
R
COMPONENT
VIDEO IN
Y
VIDEO
OUT
(Green)
(Green)
Y
L
(Blue)
(Blue)
(Red)
PB
/CB
Editing
(Red)
RCA component
video cable
PR
/CR
R
COMPONENT
VIDEO OUTPUT
AUDIO OUT
V DEO VIDEO
N
OUT
L
RF coaxial
cable
Y
L
ANT. IN
This connection is for
TV pass through only
VHF / UHF
antenna
OUT
R
ANTENNA
AUDIO IN
(L )
N
R
VIDEO AU IO O T
OUT
COAXIAL
V DEO
IN
OUT
or
cable TV
company
Others
ANTENNA
RF coaxial
cable
Function Setup
rear of this unit
N
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Español
EN
17
CONNECTION
Connecting to a TV with an HDMI Compatible Port
• HDMI outputs the video / audio signals without converting to analog signals.
• No audio connection is required.
HDMI IN
HDMI cable
HDMI OUT
rear of this unit
V DEO VIDEO
IN
OUT
IN
L
Y
L
OUT
R
ANTENNA
AUDIO IN
L1)
N
R
-V DEO A D O UT
OUT
COAX AL
-VIDEO
ANT. IN
This connection is for
TV pass through only
VHF / UHF
antenna
IN
Do not tilt the connector when inserting it into the HDMI jack, and make sure the
shapes of the jack and the connector are matched.
OUT
RF coaxial
cable
RF coaxial
cable
ANTENNA
or
cable TV
company
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
Please purchase the rest of the necessary cables at your local store.
HDMI Mode and Actual Output Signals
Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed.
Front Panel Display
Video Output Signal
480 Progressive
Press [HDMI]
720 Progressive
Press [HDMI]
1080 interlaced
Press [HDMI]
1080 Progressive
Copyright protection system
To play back the digital video images of a DVD via an HDMI
connection, it is necessary that both the player and the
display device (or an AV amplifier) support a copyright
protection system called HDCP (high-bandwidth digital
content protection system). HDCP is copy protection
technology that comprises data encryption and
authentication of the connected AV device. This unit
supports HDCP. Please read the operating instructions of
your display device (or AV amplifier) for more information.
*HDMI: High Definition Multimedia Interface
Press [HDMI]
• The HDMI mode that is not supported by display device will be skipped.
Note
• Some devices with an HDMI input may not operate properly with this unit.
• When using an HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; this unit can be controlled
by another device via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may be
limited by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device
such as this unit, audio signals are not output from the HDMI output connector.
• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable,
the signals are output in digital RGB.
• When a power failure occurs, or when you unplug the unit, some problems with the HDMI setting might occur. Please check and set
the HDMI setting again.
18
EN
CONNECTION
Introduction
Connecting to a Cable / Satellite Box
RCA video cable
RCA audio cable
VIDEO IN
R
RCA audio
cable
cable/satellite box
R
S-VIDEO AUDIO OUT
rear of this unit
ANT.OUT ANT. IN
ANT. IN
IN
V DEO VIDEO
IN
OUT
L
R
L
This connection is for
TV pass through only
N
R
-V DEO A D O UT
OUT
RF coaxial cable
VIDEO
Recording
AUDIO IN
L1)
satellite
dish
Y
OUT
ANTENNA
Basic Setup
AUDIO IN
(L1)
IN
VIDEO OUT
L
R
R
L
AUDIO OUT
AUDIO IN
L
L
Connections
RCA video cable
VIDEO VIDEO
IN
OUT
IN
RF coaxial
cable
RF coaxial
cable
OUT
or
cable TV
company
Playback
ANTENNA
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Function Setup
• Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.
• Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUTPUT jack
or HDMI OUT jack for connecting to your TV.
With this setup:
• You can record any unscrambled non-copy protected program by selecting the channel on the cable/satellite box.
Be sure that the cable/satellite box is turned on.
• You cannot record one channel while watching another channel.
Editing
Note
Others
Español
EN
19
CONNECTION
Connecting to a TV without Audio / Video Jacks
VHF / UHF
antenna
rear of this unit
IDEO V DEO
N
OUT
IN
Y
L
L
OUT
R
ANTENNA
RF coaxial
cable
AUD O N
L1)
R
IN
S-V DEO UD O OUT
OUT
IN
VIDEO
OUT
or
cable TV
company
COAX AL
S-VIDEO
RCA video
cable
L
OUT
R
ANTENNA
AUDIO OUT
RCA audio cable
ANT. IN
rear of your RF modulator
(not supplied)
RF coaxial cable
RF coaxial cable
Set channel 3 or 4
ANT. IN
3
4
CHANNEL
R
L
AUDIO IN
VIDEO IN
TO TV
Set channel 3 or 4
No Antenna (RF) Output!
If your TV only has an Antenna input
(no A/V inputs), you will need a
RF modulator (NOT INCLUDED) to
connect this player.
ANT. IN
TV
RF modulator
3
4
CHANNEL
L
VIDEO IN
R
AUDIO IN
TO TV
ANT. IN
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• RF modulator is not supplied with this unit. You need to purchase it at your local store.
• The quality of picture may become poor if this unit is connected to an RF modulator.
20
EN
CONNECTION
Introduction
Digital Audio Connection
Coaxial Cable Connection
Dolby Digital decoder
COAXIAL
rear of this unit
digital audio
coaxial cable
VIDEO V DEO
N
OUT
N
Y
L
Connections
OUT
R
AUD O N
L1)
ANTENNA
R
IN
OUT
S VIDEO AUD O OU
COAX AL
S-V DEO
COAXIAL
digital audio
coaxial input jack
HDMI Audio Connection
rear of this unit
V DEO V DEO
N
OUT
N
L
HDMI IN
OUT
HDMI cable
R
ANTENNA
AUDIO IN
(L )
R
IN
S VIDEO AUD O OU
OUT
COAXIAL
S V DEO
Basic Setup
AV receiver / amplifier with an HDMI input jack
HDMI OUT
To set up “HDMI Audio” refer to pages 102 and 112.
Audio format (disc)
Dolby Digital
Setting of this unit
PCM
Dolby Digital
Stream
PCM
Digital Output
2 channel PCM
Dolby Digital
2 channel PCM
Dolby Digital
2 channel PCM
Playback
LPCM
HDMI
Recording
To set up “Dolby Digital” refer to pages 100 and 105.
Stream
Actual Output
Cables not included.
Please purchase the necessary cables at your local store.
Editing
Note
Function Setup
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as movie theaters.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
2 Channel Analog Audio Connection
stereo system
VIDEO
OUT
analog audio
input jacks
R
L
L
rear of this unit
VIDEO V DE
N
OUT
IN
L
Others
AUDIO IN
L
OUT
R
ANTENNA
AUD O N
(
)
IN
S-V DEO A
R
OUT
T
S-V DEO
OAXIAL
R
RCA audio cable
AUDIO OUT
Español
Supplied cables used in these connections are as follows:
• RCA audio cable (L/R) x 1
EN
21
BEFORE YOU START
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
Finding the Viewing Channel on Your TV
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
HDMI
TITLE
1
2
3
After you have made all the
necessary connections, press
[STANDBY-ON y] to turn on the unit.
Turn on your TV.
• If connected to your VCR make sure it is
switched off or in standby mode before
proceeding.
Locate the Video/Input button on the
TV’s remote control that access the
external Input Channel . Press until
you see the “Initial Setup” menu on
the screen.
Initial Setup
OK
RETURN
DISPLAY
Language
V.REPLAY
English
Français
Español
V.SKIP
Select the language for Setup display
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Input Mode Names for Common TV Brands (Example)
Admiral AUX
Panasonic TV/VIDEO
Curtis
LINE1, LINE2,
RCA
INPUT, TV/VCR,
Mathis
00, 90, 91, 92, 93
00, 90, 91, 92, 93
GE
INPUT, TV/VCR, Samsung TV/VIDEO
00, 90, 91, 92, 93
Hitachi
INPUT, AUX
Sanyo
VIDEO
JVC
VIDEO, VIDEO 1, Sharp
00
VIDEO 2, VIDEO 3
Kenwood AUX
Sony
VIDEO1, VIDEO2,
VIDEO3
LXI-Series 00
Toshiba
TV/GAME
Magnavox AUX CHANNEL
Zenith
00
Note
• Video input selection varies for different brand’s
models of TVs.
• Consult your TV manufacturer if none of the above is
successful.
22
EN
You may try to access the Video/Input mode by:
• Locate the input button on the Front/Top/Side
of the TV.
• Locate the Input Mode in the TV’s Setup Menu.
If you cannot locate the Video/Input button on
the TV’s remote control, refer to the TV’s User
Manual or “Input Mode Names for Common TV
Brands (Example)”.
If more than 10 minutes has passed, you may
see the MAGNAVOX screen saver.
4
Proceed to step 2 in “INITIAL
SETTING” on page 28.
BEFORE YOU START
Guide to On-Screen Display / Menu
The on-screen display changes in the following order
as you press [DISPLAY].
DTV Program Guide
DTV Program Guide (only in DTV mode)
HDMI Information
(only for the images output through the HDMI output)
TV-PG
ENGLISH
1. Program title (max. 2 lines displayed)
2. Closed Caption (Indicates that the program being
broadcast is available with closed captioning.)
3. Signal strength (Indicates the signal strength of the
current channel.)
4. Program guide (max. 6 lines displayed)
5. Channel number
6. Broadcast station
7. Audio language (“Other” is displayed when the
audio language cannot be acquired, or the acquired
languages are other than English, Spanish or French.)
8. Program rating
Note
• When the program guide is displayed in more than 6
lines, use [K / L] to scroll.
• “No description provided.” is displayed when the
program guide is not provided.
Playback
MP3 Tag Information
(only when an MP3 file is in playback)
WLIW-DT
90
INFORMATION-1
INFORMATION-2
INFORMATION-3
INFORMATION-4
INFORMATION-5
INFORMATION-6
5
6
7
8
Recording
Title Name Information
(only when DVD+RW/DVD+R/DVD-RW/DVD-R, or HDD
is in playback)
or
File Name Information
(only when a CD with MP3/JPEG/Kodak Picture CD files
is in playback)
69.1
Basic Setup
Autostart Recording Information
(only in HDD mode with no titles are playing back)
PROGRAM TITLE NAME
Connections
1
2
3
4
OFF
HDD / DVD Information/Menu
Introduction
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc or the disc/file in playback, or the HDMI status, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.
Editing
Autostart Recording Information
7
2:59:44 / 3:31:31
Function Setup
CH 10
5 6
1
7:10AM
10:42AM
10:10AM
2
4
3
23
Español
EN
Others
1. Starting time of the autostart recording
2. Status of the time autostart recording
Live : Indicates when watching live TV
B : Indicates when playing back the autostart recording.
3. The time that the picture currently displayed on the
screen is broadcasted
4. Current time
5. The progress of the autostart recording
6. Current point of the playback of the autostart recording
7. Elapsed time of the playback of the autostart
recording / total time of the autostart recording
BEFORE YOU START
HDD / DVD Information / Menu
6
1/ 5
7
1/ 5
0:01:00 / 1:23:45
DVD Video
Title/File Name Information
Title Name Information
Title Name
My Title
CH 10
5
1
2
File Name Information
File Name
My File
DVD SP(2Hr)
4
1h53m
3
* This is an example screen only for explanation.
Displayed items may vary depending on the disc you
insert.
1. Indicates the file type or a disc type and format mode.
(DVD mode only)
2. Indicates a channel number or selected external input
channel.
3. Indicates the component in use, a recording mode and
possible recording time left.
The on-screen indication of the possible recording time
left on HDD / DVD may differ from the actual recordable
time as this unit employs the variable bit rate encoding
system which varies the recording (storage) amount of
data in conformity with the amount of information on
the video.
4. Indicates an operation status.
5. Icons Used:
: Search – for title / chapter search, track search
and time search. (Refer to page 77.)
: Audio – to switch audio sound track.
(Refer to page 79.)
: Subtitle – to switch subtitles. (Refer to page 79.)
MP3 Tag Information
• First, track name will be displayed.
Track Name
• If you press [DISPLAY] one more time, artist name will
be displayed.
Artist Name
• If you press [DISPLAY] one more time, album name
will be displayed.
Album Name
• If there is no artist, track or album name, “Not Available”
will be displayed.
HDMI Information
: Angle – to switch camera angles.
(Refer to page 80.)
: Repeat – to repeat playback. (Refer to page 75.)
1
Video Info. :
Audio Info. :
: Marker – to assign a specific point on a title.
(Refer to page 74.)
: Noise Reduction – to reduce noise in the
playback picture. (Refer to page 80.)
: Zoom – to zoom screen. (Refer to page 74.)
: Surround – to turn on the virtual surround system.
(Refer to page 80.)
6. Indicates the current title number/total number of
titles, the current chapter number/total number of
chapters, and time lapse of the current title playback/
total duration of the title.
7. Indicates the component in use.
: HDD
: DVD
24
EN
480p
/
Bitstream
2
YCbCr
3
4
*1. Indicates the resolution of the HDMI output image.
*2. Indicates the HDMI video format.
*3. Indicates the HDMI audio format.
4. Indicates current disc status.
* “- - -” will be displayed, when it does not have any
information.
BEFORE YOU START
Press [SETUP] to display the main menu. Then use
[K / L] to select a menu and press [OK] to display the
menu. These menus provide entries to all main functions
of the unit.
General Setting
Timer Programming
Title List
Disc Edit
HDD Menu
Dubbing
DISC Playback Mode
General Setting
Parental Lock
Disc Audio
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Variable Skip / Replay
Playback
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
Editing
1. Playback:
To set up the unit to play back discs as you prefer.
2. Display:
To set up the menu screen as you prefer.
3. Video:
To set up the video setting.
4. Recording:
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. Channel:
To adjust the channel setting of the unit as you prefer.
7. HDMI:
To set up the HDMI connection setting.
8. Reset All:
To reset the setting to the factory default.
Recording
1
2
3
4
5
6
7
8
Basic Setup
General Setting Menu
Connections
Setup
1
2
3
4
5
6
7
1. General Setting:
To go to general setting menu.
2. Timer Programming:
To program a timer recording.
3. Title List:
To call up the title list.
4. Disc Edit:
To set up the DVD setting.
5. HDD Menu:
To set up the HDD setting.
6. Dubbing:
• To dub the content of the HDD to DVD or vice versa.
• “Dubbing” is available only when a recordable disc is
loaded.
7. DISC Playback Mode:
To set up the disc playback setting.
• “DISC Playback Mode” is available only when, an audio
CD, a video CD, a CD-RW/-R with MP3 / JPEG / Kodak
Picture CD files is inserted into the unit.
Introduction
Main Menu
Function Setup
Others
Español
EN
25
BEFORE YOU START
Disc Edit / HDD Menu / Dubbing / DISC Playback Mode
<Disc Edit menu (DVD+RW)>
Disc Edit
1
2
3
4
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
<Disc Edit menu (DVD-RW)>
Disc Edit
1
2
3
4
Edit Disc Name
Erase Disc
Finalize
Disc Protect OFF
ON
<Disc Edit menu (DVD+R/DVD-R)>
Disc Edit
1
3
4
Edit Disc Name
Finalize
Disc Protect OFF
ON
<DISC Playback Mode menu (audio CD/VCD)>
DISC Playback Mode
5
6
7
Random Play
Program Play
PBC (Video CD only)
<DISC Playback Mode menu (MP3/JPEG)>
DISC Playback Mode
8
Music
Photo
Random Play
Slide Show
5
9
<HDD Menu>
HDD Menu
10
11
Delete All Unprotected Titles
Delete All Titles
<Dubbing menu>
Dubbing
12
13
HDD
DVD
DVD
HDD
1. Edit Disc Name:
Allows you to rename the disc.
2. Erase Disc: (DVD+RW/DVD-RW only)
Allows you to erase all contents in the disc and format it.
3. Make Edits Compatible: (DVD+RW only)
Allows you to memorize the editing status on the
disc if you have added or deleted chapters, or made
chapters hidden on this unit, and to show the effects
when playing back on the other unit.
Finalize: (DVD+R/DVD-RW/-R only)
Allows you to finalize a disc containing recorded titles.
4. Disc Protect :
Allows you to protect a disc from accidental editing or
recording.
5. Random Play:
Allows you to activate the random playback feature.
6. Program Play: (audio CD/video CD only)
Allows you to activate the program playback feature.
7. PBC (Video CD only):
Allows you to select images or information on the
menu screen by activating PBC (playback control)
function.
8. Music/Photo: (Mixed media disc only)
When a mixed media disc is inserted, this menu screen
will appear instead of “DISC Playback Mode” menu
allowing you to select the media you want to play.
9. Slide Show: (JPEG/Kodak Picture CD files only)
Allows you to select the display time of the slide show
mode.
10. Delete All Unprotected Titles:
Allows you to delete all unprotected titles in the HDD
title list.
11. Delete All Titles:
Allows you to delete all titles, including the protected
titles, in the HDD title list.
12. HDD DVD:
Allows you to dub from HDD to DVD.
13. DVD HDD:
Allows you to dub from DVD to HDD.
Note
• Disc edit is available for a disc which is not finalized
or DVD+RW.
26
EN
BEFORE YOU START
Introduction
Switching HDD / DVD Mode
Because this unit is a combination of HDD and DVD recorder, you must first select which component (output mode)
you wish to operate.
HDD mode
DVD mode
Press [HDD] to activate the HDD component.
Press [DVD] to activate the DVD component.
@/
ABC
OPEN/
CLOSE
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUD O
REPEAT
D SC MENU
CHANNEL
Basic Setup
SETUP
Connections
SOURCE
STANDBY ON DTV/TV
HDMI
T TLE
OK
DISPLAY
DVD button
RETURN
V REPLAY
V SK P
HDD button
HDD button
RAP D PLAY
HDD
DVD
T MER
REC MODE
REC
Recording
D DUBBING
DVD button
Playback
How to Insert a Disc
1) Press [OPEN/CLOSE A] to open the disc tray.
Editing
2) Place the disc on the disc tray with its label side facing up.
Function Setup
Align the disc to
the disc tray guide.
3) Press [OPEN/CLOSE A] to close the disc tray.
It may take a while to load
the disc.
Others
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray, then remove the disc before turning the unit to the standby mode.
• When inserting a brand-new DVD+RW/DVD-RW, the unit automatically starts to format.
• If titles have been recorded on the disc, the title list is displayed. Press [STOP C] to exit the title list.
Español
EN
27
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
OPEN/
CLOSE
CHANNEL
1
2
Follow the procedure in “Finding the
Viewing Channel on Your TV” on
page 22 to display “Initial Setup”
menu.
Use [K / L] to select your desired
language, then press [OK].
Initial Setup
Language
SETUP
DISC MENU
English
Français
Español
HDMI
TITLE
3
Use [K / L] to select the type of
broadcasting signal, then press [OK].
Initial Setup
OK
O
Channel Preset
RETURN
DISPLAY
V REPLAY
Make sure the antenna is
connected to “ANTENNA IN” jack.
Antenna
Cable (Analog)
Cable (Analog / Digital)
V.SKIP
Auto Preset will scan all terrestrial channels.
This may take a while to complete.
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
The unit will start getting channels available in
your area.
Antenna:
(When using antenna)
The channels broadcasted in analog TV and
digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
CH
1
Auto Presetting Now
4
If a PBS (public broadcasting station) is available
in your area, clock setting will automatically be
performed and the correct clock will be displayed
following the channel preset procedure.
Initial setting is then complete.
Press [RETURN] to exit.
If a PBS (public broadcasting station) is not
available in your area, press [OK]. Then proceed
to step 5 in “Manual Clock Setting” on page 34.
28
EN
CHANNEL SETTING
Introduction
If you have changed antenna connection, we recommend that you program available channels in your area with the
following procedures.
Auto Channel Scan
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
HDMI
TITLE
RETURN
DISPLAY
V REPLAY
“General Setting” menu will appear.
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
Use [K / L] to select “Auto Channel
Preset”, then press [OK].
Use [K / L] to select the type of
broadcasting signal, then press [OK].
Auto Channel Preset
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
To cycle through only the memorized channels, use
[CHANNEL / ].
To select a channel directly (including the ones not
memorized), use [the Number buttons] and [ • ] (for
digital TV channels).
Function Setup
5
When scanning is over, press [SETUP]
to exit.
Editing
The unit will start getting channels available in
your area.
• When aerial antenna is connected, select
“Antenna”.
• When connected to CATV, select “Cable
(Analog)” or “Cable (Analog / Digital)”.
To cancel the auto channel preset during
scanning:
Press [RETURN] to go the previous screen or
[SETUP] to cancel.
RAPID PLAY
Playback
Antenna
Cable (Analog)
Cable (Analog / Digital)
V.SKIP
Recording
OK
O
1
2
3
4
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
Basic Setup
.@/:
OPEN/
CLOSE
Connections
STANDBY-ON DTV/TV
Others
Español
Note
• If the auto channel preset is canceled during
presetting, some channels not yet preset may not be
received.
EN
29
CHANNEL SETTING
Adding / Deleting Channels
You may want to add or delete TV channels if your
channel lineup changes or if you no longer watch some
channels.
Adding a channel is only available for the analog TV
channels.
Make sure
• You perform the “Auto Channel Scan” before adding or
deleting the channels.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
HDMI
TITLE
1
2
3
4
Press [DTV/TV] to select the mode
(DTV or TV) to/from which you want
to add/delete channels.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
Use [K / L] to select “Manual Channel
Preset”, then press [OK].
Auto Channel Preset
Manual Channel Preset
TV Audio Select
• If you are adding or deleting analog TV/CATV
channels, go to
to continue.
ANALOG
• If you are deleting digital TV/CATV channels, go
to continue.
to
DIGITAL
OK
O
RETURN
DISPLAY
V REPLAY
V.SKIP
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Instructions continue on the next page.
30
EN
CHANNEL SETTING
5
Manual Channel Preset
2
Add
Delete
6
Recording
CH
Use [K / L] to select “Delete”, then
press [OK]. Then select the next
channel to delete.
• If the setting is complete, press [RETURN] to
activate “Manual Channel Preset”.
Manual Channel Preset
Your setting will be activated and it will
automatically switch to the next channel so that
you can continue adding or deleting channels.
DTV 2 (CH - - - )
Add
Delete
Playback
7
Basic Setup
Use [K / L] to select “Add” or
“Delete”, then press [OK].
• Only the major channel is displayed in “Manual
Channel Preset” menu. (The channel number
displayed in the parenthesis is a virtual channel
number)
• Use [CHANNEL / ] to cycle through only
the memorized channels.
• You cannot use [{ / B] for the digital TV
channel selection.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
Connections
6
• Use [CHANNEL / ] to cycle through only
the memorized channels.
• Use [{ / B] to cycle through all the channels
including the ones not memorized.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
DIGITAL
Select the channel number to delete.
Introduction
5
ANALOG
Select the channel number to add or
delete.
Press [SETUP] to exit.
Your setting will be activated.
Press [SETUP] to exit.
Function Setup
7
Editing
WARNING:
• For the digital TV channels, you cannot recover the
deleted channels once they are deleted unless you
perform the auto channel preset again.
Others
Español
EN
31
SETTING THE CLOCK
Auto Clock Setting
This unit can set the time and date automatically by
referring to a channel that carries a clock information. If a
PBS (public broadcasting station) is available on Cable in
your area, follow “Auto Clock Setting” below. If not, follow
“Manual Clock Setting” on page 34.
Make sure
• The cable TV connections are correct.
• Channels are set. (Refer to page 29.)
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
ANALOG AUTO CLOCK SETTING (Cable TV only)
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
1
2
3
4
“General Setting” menu will appear.
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
Use [K / L] to select “Auto Clock
Setting”, then press [OK].
Use [K / L] to select “Auto”, then
press [OK].
Auto Clock Setting
OFF
Auto
Manual
HDMI
TITLE
OK
O
RETURN
DISPLAY
V REPLAY
V.SKIP
5
6
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Press [SETUP] to exit.
Press [STANDBY-ON ] to turn the
unit to the standby mode.
This unit will search for the time only when the
power is in the standby mode. Initially leave it in
standby mode for at least 15 minutes to give this
unit time to set the clock. Once the clock is set, the
unit receives the clock data at 12:00 am & 12:00 pm
when unit is in standby mode. Check the time after
the Auto Clock was set, if it is incorrect time then set
the “Auto Clock Setting“ to “OFF” in step 4 above.
Then try “Manual Clock Setting“ on page 34.
Manual Auto Clock Setting
If the unit chooses an incorrect PBS channel on Cable
TV, set the PBS channel manually by following the steps
below.
Note
• The clock may set itself automatically after you
connect the antenna/cable signal and plug in the
power cord.
• Only the Analog PBS channel Cable TV signal is
effective for auto clock setting.
• For analog auto clock setting, incorrect time may be
obtained depending on the broadcast information. If
this occurs, set the “Auto Clock Setting” to “OFF” at
step 4 above and try “Manual Clock Setting” on page
34.
32
EN
1
2
Select “Manual” at step 4 above, then
press [OK].
Use [the Number buttons] or [K / L]
to enter your Cable TV Analog PBS
channel number, then press [OK].
Set Channel No.
CH
3
1
Press [SETUP] to exit and turn the
unit to the standby mode.
SETTING THE CLOCK
Introduction
Auto Clock Setting (cont’d)
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
Use [K / L] to select “Auto Clock
Setting”, then press [OK].
• The clock may set itself automatically after this unit
receives the antenna/cable signal and plug in the
power cord.
• If the clock is not set correctly, timer recording does
not work properly.
• Analog off the air broadcasts have ended. Analog
auto clock setting will no longer be available except
via Cable TV. Try digital auto clock setting in this
case.
• For digital auto clock setting, incorrect time may be
obtained depending on the broadcast information.
If this occurs, set the “Auto Clock Setting“ to “OFF” at
step 4 and try “Manual Clock Setting“ on page 34.
Use [K / L] to select “Manual”, then
press [OK].
Time adjustment for each time zone
Eastern
GMT (Greenwich Mean Time ) - 5 hours
Central
GMT (Greenwich Mean Time ) - 6 hours
Enable Manual operation to select the DTV
Channel for receiving the Clock Data and
selecting your Time Zone below.
Mountain
GMT (Greenwich Mean Time ) - 7 hours
Pacific
GMT (Greenwich Mean Time ) - 8 hours
Alaska
GMT (Greenwich Mean Time ) - 9 hours
Press [{ ] to highlight “CH”. Press
[K / L] to select “DTV”, then press
[ B] .
Hawaii
GMT (Greenwich Mean Time ) - 10 hours
OFF
Auto
Manual
Playback
GMT (Greenwich Mean Time ) - 4 hours
Recording
Atlantic
Auto Clock Setting
Basic Setup
5
“General Setting” menu will appear.
Note for auto clock setting
Connections
1
2
3
4
DIGITAL AUTO CLOCK SETTING
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
Set Channel No.
DTV
1
8
Press [SETUP] to exit and turn the
unit to the standby mode.
Editing
6
7
Use [the Number buttons] or [K / L]
to enter the desired major channel
number to receive the Clock Data,
then press [OK].
Function Setup
Use [K / L] to select the desired time
zone, then press [OK].
Time Zone
Español
This unit will search for the time only when the
power is in the standby mode. Initially leave it in
standby mode for at least 15 minutes to give this
unit time to set the clock. Once the clock is set, the
unit receives the clock data at 12:00 am & 12:00 pm
when unit is in standby mode. Check the time after
the Auto Clock was set, if it is incorrect time then set
the “Auto Clock Setting“ to “OFF” in step 4 above.
Then try “Manual Clock Setting“ on page 34.
Others
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
EN
33
SETTING THE CLOCK
Manual Clock Setting
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
1
2
3
4
Daylight Saving Time
When “Daylight Saving Time” is “ON”, the unit clock will
automatically adjust the time in order to fit the daylight
saving time.
“ON (MAR - NOV)” has been selected as the default.
“General Setting” menu will appear.
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
Use [K / L] to select “Clock Setting”,
then press [OK].
Use [K / L] to select calendar or time,
then press [OK].
Clock Setting
JAN / 01 / 2010 ( FRI )
12 : 00 AM
Use [{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[OK] when you finish setting all the
contents.
5
1
2
3
4
Your setting will be activated.
The clock starts counting when you press [OK].
Press [SETUP] to exit.
5
• Your setting will be canceled if you press [SETUP]
before pressing [OK] at step 5.
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds when you set the clock manually.
• For setting the day, year, hour, and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2009
up to 2059.
34
EN
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
Use [K / L] to select “Daylight Saving
Time”, then press [OK].
Use [K / L] to select “ON (MAR NOV)”, “ON (APR - OCT)” or “OFF”,
then press [OK].
Daylight Saving Time
ON (MAR - NOV):
Move forward one hour on the second Sunday in
March and move back one hour on the first
Sunday in November.
ON (APR - OCT):
Move forward one hour on the first Sunday in
April and move back one hour on the last
Sunday in October.
JAN / 01 / 2010 ( FRI )
12 : 00 AM
Note
“General Setting” menu will appear.
ON (MAR - NOV)
ON (APR - OCT)
OFF
Clock Setting
6
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
Press [SETUP] to exit.
TUNER SETTINGS
You can easily switch the analog TV (NTSC) and digital TV
(ATSC) with the remote control.
Channel Selection
Select channels by using [CHANNEL / ] or [the
Number buttons] found on remote control.
What is the minor channel?
By using high compression technology, digital
broadcasting offers a service that enables multiple signals
to send simultaneously.
Therefore, you can select more than one program per
major channel since digital broadcasting technology
distinguishes between multiple channels broadcast by a
single network.
NTSC (analog mode) [Air Time] ATSC (digital mode)
18:00
18:30
CH4-1 smallest smallest
CH
CH
CH4-2
CH4-3
CH4-1 smallest
CH
CH4-3
CH4-1
CH4
Basic Setup
[CHANNEL / ]
Use [CHANNEL / ] to change the channel.
19:00
19:30
CH4-1
20:00
CH4-2 smallest
CH
Recording
major channel minor channel
: change automatically
: change manually by using [CHANNEL
/
]
Playback
Editing
Function Setup
[the Number buttons]
Press the channel number with [the Number buttons] to
select a channel you want to watch.
<Analog TV Channels>
Enter the channel number with [the Number buttons] to
select a channel you want to watch.
For 1-digit number
e.g.) 2 ch:
[0] + [2], [2] + [•] or
[2] + leave it for 2 seconds.
For 2-digit number
e.g.) 12ch:
[1] + [2]
<Digital TV Channels>
Enter the major and minor channel number with [the
Number buttons] to select a channel you want to watch.
For 1-digit number
e.g.) 2.1 ch:
major channel
[0] + [2] or [2] + [•]
minor channel
[0] + [1], [1] + [•] or
[1] + leave it for 2 seconds.
For 2-digit number
If 2 channel numbers are pressed consecutively, that
number will become the major channel.
e.g.) 35.1ch:
major channel
[3] + [5]
minor channel
[1]
• If you enter 1 or 2 digit for major channel and leave it for
2 seconds, the number will be taken as the major
channel and lowest minor channel of the major channel
will be displayed.
Connections
Press [DTV/TV] on the remote control.
• The analog mode and digital mode switch alternately.
About digital TV broadcasting:
With its high definition broadcast, digital broadcasting far
surpasses analog broadcasting in both its picture and
sound quality.
Introduction
Switching Analog Mode /
Digital Mode
Note
Others
• It may take up to 5 to 7 seconds to switch the digital
TV channels.
• In digital TV broadcasting, 2 or more channels, called
minor channels, are simultaneously broadcast on one
main channel, called major channel.
Español
EN
35
TUNER SETTINGS
This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be
recorded.
Selecting TV Audio
Digital TV
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
HDMI
OK
RETURN
V REPLAY
V.SKIP
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Note
• You cannot change the audio language for the
recording of digital TV broadcasting.
• Pressing [AUDIO] does not control external device
audio.
• When there is only one audio channel on the
broadcast, pressing [AUDIO] does not display
anything.
36
EN
English 1/2
CHANNEL
TITLE
DISPLAY
1
Press [AUDIO] to cycle through
available audio languages.
• When you press [AUDIO], selected language
will be displayed on the TV screen.
• Every time you press [AUDIO], the language
will be switched.
e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3
• Available languages differ depending on the
broadcast.
• The language information display will
automatically disappear.
• When you record digital TV broadcasting, the
audio language you have selected will be
recorded.
TUNER SETTINGS
Introduction
Selecting TV Audio (cont’d)
Analog TV
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
HDMI
TITLE
RETURN
DISPLAY
V REPLAY
“General Setting” menu will appear.
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
Use [K / L] to select “TV Audio
Select”, then press [OK].
Use [K / L] to select “Stereo” or
“SAP”, then press [OK].
Recording
OK
O
1
2
3
4
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
Basic Setup
.@/:
OPEN/
CLOSE
Connections
STANDBY-ON DTV/TV
TV Audio Select
Stereo
SAP
V.SKIP
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Press [SETUP] to exit.
Editing
5
Playback
Stereo:
Outputs main-audio.
SAP (secondary audio program):
Outputs sub-audio.
Function Setup
Note on recording analog TV audio
• When you record an analog TV program available in
second audio or stereo, you have to select either
“Stereo” or “SAP” in “General Setting” menu
beforehand. Refer to the following table to check an
appropriate setting.
Selected
audio
SAP
Disc
recording
Audio
output
STEREO+SAP
STEREO
STEREO
STEREO
STEREO
STEREO
MONO+SAP
MONO
MONO
MONO
MONO
SAP
SAP
STEREO
STEREO
STEREO
MONO+SAP
SAP
SAP
MONO
MONO
MONO
EN
Español
MONO
STEREO+SAP
Others
Stereo
Broadcast
audio
37
TUNER SETTINGS
DTV Closed Caption
Digital TV
Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
HDMI
TITLE
1
2
3
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
4
Use [K / L] to select “Caption Service”,
then press [OK].
5
Use [K / L] to the desired DTV closed
caption, then press [OK].
OK
O
“General Setting” menu will appear.
Use [K / L] to select “Display”, then
press [OK].
Use [K / L] to select “DTV CC”, then
press [OK].
Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
RETURN
DISPLAY
V REPLAY
V.SKIP
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
DTV CC
Caption Service
Recording
Caption Service
OFF
Service1
Service2
Service3
Service4
Service5
Service6
OFF:
Select if you do not want DTV CC. This is the
default.
Service 1 to Service 6:
Select one of these before changing any other
item in the closed caption menu. Choose
“Service 1” under normal circumstances.
6
38
EN
Press [SETUP] to exit.
TUNER SETTINGS
Introduction
Closed Caption Style
Digital TV
Digital TV can also change the style of its closed caption such as font, color or size, etc.
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
HDMI
TITLE
4
Use [K / L] to select “User Setting”,
then press [OK].
5
Use [K / L] to select “ON”, then press
[OK].
OK
O
“General Setting” menu will appear.
Use [K / L] to select “Display”, then
press [OK].
Use [K / L] to select “CC Style”, then
press [OK].
Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
Recording
DISC MENU
CHANNEL
1
2
3
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
Basic Setup
.@/:
Connections
STANDBY-ON DTV/TV
OPEN/
CLOSE
RETURN
DISPLAY
V REPLAY
V.SKIP
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Playback
RAPID PLAY
CC Style
Editing
User Setting
Font Size
Font Style
Font Opacity
Font Color
Edge Type
Edge Color
Back Opacity
Back Color
ON
OFF
Function Setup
User Setting
Others
EN
39
Español
Instructions continue on the next page.
TUNER SETTINGS
6
<Edge Type>
Edge type of the displayed caption can be
switched as below.
Use [K / L] to select the item and
switch the setting for each item you
want to set, then press [OK].
Edge Type
• When “User Setting” is set to “ON”, you can set
the following items. CC style set by “User
Setting” will be displayed.
• The setting description for each item is shown
below.
None
Raised
Depressed
Uniform
L.Shadow
R.Shadow
<Edge Color>
Edge color of the displayed caption can be
switched as below.
<Font Size>
Font size of the displayed caption can be
switched as below.
Edge Color
Font Size
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Large
Middle
Small
<Font Style>
Font style of the displayed caption can be
switched as below.
Font Style
<Back Opacity>
Background opacity of the displayed caption can
be switched as below.
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Back Opacity
Solid
Transparent
Translucent
Flash
<Font Opacity>
Font opacity of the displayed caption can be
switched as below.
<Back Color>
Background color of the displayed caption can
be switched as below.
Font Opacity
Back Color
Solid
Transparent
Translucent
Flash
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
<Font Color>
Font color of the displayed caption can be
switched as below.
Font Color
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
40
EN
7
Press [SETUP] to exit.
INFORMATION ON RECORDING
Recordable Discs
Unrecordable Discs
Logos
Attributes
• DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc (refer to page 97).
• DVD-R recorded in the mode other than +VR is not
recordable on this unit.
Maximum recordable numbers of title / chapters
HDD :
DVD+R
DVD-RW
DVD-R
DVD :
Basic Setup
DVD+RW
8cm/12cm, single-sided,
single layer disc
Approx. max. recording time
(SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
600 titles
99 chapters per title
49 titles per disc
254 chapters per disc
99 chapters per title
Connections
This unit can record to DVD+RW, DVD+R, DVD-RW and
DVD-R.
DVD+R/DVD-R can only be recorded to once. DVD+RW/
DVD-RW can be recorded to and erased many times.
DVD-RW/-R will be recorded in the DVD+VR mode
automatically in this unit.
Introduction
Before you make a recording, read the following information.
Recording
• The following discs are recommended for good
recording quality and are proven to be compatible with
this unit. However, depending on the media condition
the unit may not read the disc properly.
Verbatim
DVD+R 8x,
DVD+RW 4x,
DVD-R 8x,
DVD-RW 2x
JVC
DVD-RW 4x
Maxell
DVD+R 4x/8x/16x, DVD-R 8x/16x
SONY
DVD+R 4x/8x/16x, DVD+RW 4x
TDK
DVD+R 4x/8x/16x
Performance of any other discs are not guaranteed.
• You can play back DVD+RW on most DVD players
without finalizing. However, if you have added or
deleted chapters, or made chapters hidden, you
must perform “Make Edits Compatible” before being
able to see those effects on other units. (Refer to
page 98 for more details.) To play back discs other
than DVD+RW on other DVD players, you will need
to finalize.
Playback
Editing
Function Setup
Others
Español
EN
41
INFORMATION ON RECORDING
Recording Mode
About HDD
You can select a recording mode among 6 options, and
the recording time will depend on the recording mode
you select as follows.
Disc size
Recording
mode
8cm Disc
12cm Disc
HDD
(Internal)
Recording
time
HQ
18 min
SP
36 min
SPP
45 min
LP
54 min
Video/sound
quality
(good)
EP
72 min
SLP
108 min
(poor)
HQ
60 min
(good)
SP
120 min
SPP
150 min
LP
180 min
EP
240 min
SLP
360 min
(poor)
HQ
64 hrs
(good)
SP
129 hrs
SPP
161 hrs
LP
193 hrs
EP
258 hrs
SLP
387 hrs
(poor)
• The recording time is only an estimate. The actual
recording time may differ.
• The audio and video quality gets poorer as the recording
time becomes longer.
• Each time [REC MODE] is pressed, recording mode and
its allowed recording time will be displayed.
Note
• This unit cannot record to CD-RW or CD-R.
• All high definition pictures will be down converted to
the standard definition pictures when they are
recorded on this unit.
• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
• You cannot record a copy-protected program using
this unit. (Copy-protected signal is included in DVDvideo, some satellite and cable broadcasts.)
• You cannot record “copy-once only” program on
DVD.
42
EN
HDD is a special device which has high recording density
and is suited for long-time recording or high-speed
cueing but by contrast, has many factors which can cause
breakage. Use HDD on the premise that you should dub
the recorded programs to a DVD to protect your precious
videos.
HDD is a temporary storage location:
HDD is not a permanent storage location of the recorded
contents. Be sure to use it as a temporary storage location
until you watch the programs once, edit them, or dub
them to a DVD.
Be sure to dub (back up) data promptly if you find
abnormalities in HDD:
If there is mechanical trouble with the HDD, grinding or
other sounds may be heard or blocky noise may appear
on the image. If you continue to use as it is, deterioration
may continue and eventually the HDD may not be used
at all. If you notice these symptoms of a failing HDD,
promptly dub the data to a DVD. When an HDD fails,
recovery of recorded content (data) may be impossible.
About the remaining capacity of HDD recording time:
The on-screen indication of the possible recording time
left on HDD / DVD may differ from the actual recordable
time as this unit employs the variable bit rate encoding
system which varies the recording (storage) amount of
data in conformity with the amount of information on the
video.
Before recording to the HDD, ensure there is sufficient
space on the HDD by deleting unnecessary titles in
advance.
BEFORE RECORDING
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
2) Use [K / L] to select “Display”, then press [OK].
3) Use [K / L] to select “DTV CC”, then press [OK].
4) Use [K / L] to select “Recording”, then press [OK].
• If “Caption Service” is set to “OFF”, you cannot select
“Recording”.
5) Use [K / L] to select “ON”, then press [OK].
Recording
Make Recording Compatible
ON
OFF
ON
OFF
Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
OFF: Prohibiting additional record to the disc that
has a title list created by other units.
5) Press [SETUP] to exit.
You can set a specified time for chapter marks.
Note
• If “Caption Service” is set to “OFF”, the caption will
not be recorded.
Recording from a Cable Box or Satellite
When recording from an external tuner like cable/satellite
box, the box will need to be turned on and set to the
channel you wish to record. You will not be able to watch
another program from the box as the recorder will be
recording the channel the cable/satellite box is set to.
Editing
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
“General Setting” menu will appear.
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
3) Use [K / L] to select “Auto Chapter”, then press [OK].
4) Use [K / L] to select a desired time option, then
press [OK].
6) Press [SETUP] to exit.
Playback
Setting for Auto Chapter
Recording
ON:
Basic Setup
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
“General Setting” menu will appear.
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
3) Use [K / L] to select “Make Recording Compatible”,
then press [OK].
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
You can record the DTV Closed Caption as the part of the
image for the recording program and see the recorded
closed caption even with the TV that is not closed caption
compliant.
Connections
Use this feature to make the unfinalized +VR mode discs
recorded on another unit recordable on this unit. When
you make an additional recording on this unit with “Make
Recording Compatible” set to “ON”, the title menu is
automatically converted to our style.
Recording the DTV Closed Caption
Introduction
Make Recording Compatible
Function Setup
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
5) Press [SETUP] to exit.
Others
Note
• The interval for auto chapter may be up to two
minutes different from the time option you set.
• A blank chapter may be created depending on the
remaining time of the disc.
Español
EN
43
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
If you are recording to the HDD, press [HDD] first, then
proceed to step 2.
If you are recording to a disc, press [DVD] first.
1
Insert a recordable disc (refer to page
27 on how to insert a disc).
Align the disc to
the disc tray guide.
HDMI
* Make sure the disc is compatible with this unit.
(Refer to page 41 for the list of compatible discs.)
TITLE
It may take a while to load
the disc.
OK
• When inserting a brand-new DVD+RW/DVDRW, the unit automatically starts to format.
(Except when HDD is recording, or when there
is a timer program which starts in 15 minutes.)
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.
RETURN
DISPLAY
V REPLAY
V.SKIP
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
2
Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 42.
DVD SP(2Hr)
3
0h58m
Select the appropriate external input
channel by pressing [SOURCE] or
[CHANNEL / ].
Press [DTV/TV] to select analog TV or
digital TV, then use [CHANNEL / ]
or [the Number buttons] and [ • ] (for
digital TV channels) to select a
desired channel to record.
Refer to “Switching Analog Mode/Digital Mode”
and “Channel Selection“ on page 35.
CH 12
44
EN
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
“I HDD” or “I DVD” will be displayed for 4 seconds.
e.g.) DVD
SP(2Hr)
As for DVD recording, the title list will appear
automatically after writing to a disc complete.
(Refer to “Guide to a Title List” on page 81.)
e.g.) DVD+R
2h00m
Connections
I DVD
5
Press [STOP C] to stop recording.
Introduction
4
Press [REC] to start recording.
Press [PAUSE F] to pause recording.
Press [PAUSE F] or [REC] again to restart
recording.
To set one-touch timer recording (OTR)...
Please finalize the disc when the writing is
completed before playing back on other DVD
players.
Writing to Disc
90%
1
I
0h30m
(normal recording)
SP(2Hr)
NOV/21/10 11:00AM CH12 SP
NOV/21/10 0:20:44
0h30m
1h00m
2
EMPTY SPACE
1:41:17 SP (2Hr)
Recording
6h00m
Basic Setup
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC] repeatedly until the desired recording time
(30 minutes to 6 hours) appears on the TV screen.
One-touch timer recording will start.
5h30m
• Press [STOP C] to exit the title list.
Playback
Editing
To change the recording length during the onetouch timer recording:
Press [REC] repeatedly until the desired length appear.
To cancel the one-touch timer recording within the
specified time:
Press [STOP C].
When the recording is completed, the unit will ask
you whether to turn the unit to the standby mode
except under conditions listed below.
- If a timer recording is programmed to start in 5 minutes.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
• The unit will be turned to the standby mode automatically if
you select “Yes” or if you do not reply in 1 minute.
Note
Function Setup
Others
• When you press [REC], recording starts immediately and continues until the HDD or disc is full, record 12 hours to
HDD or you stop recording.
• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to “Selecting TV Audio” on pages 36-37 for more details.
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
• You can play back a title on one component while making a recording on other. To do so, simply select the
component (HDD or DVD) you like to use for the playback by pressing [HDD] or [DVD] during HDD / DVD
recording. And then follow the normal playback procedure.
• If playback and recording are in progress at the same time, select the appropriate component by pressing [HDD]
or [DVD] before you press [PAUSE F] or [STOP C] to pause or stop the operation.
Note for one-touch timer recording
EN
45
Español
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning the power to the standby mode to stop one-touch timer recording.
- Using [REC] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
AUTOSTART RECORDING
Every time you turn on this unit, this unit automatically
records the channel currently viewed and temporarily
stores the recorded content to the HDD (Autostart
recording). By using this function, you can pause or go
back the TV program you are currently watching, and you
can also start recording the whole TV program even at
the middle of the TV program. The temporary recording
can be made up to 6 hours of time range. If the recording
exceeds 6 hours, earliest recording will be overwritten.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
OPEN/
CLOSE
The autostart recording will be stopped, cleared in
following cases:
- Turning the power to the standby mode
- Start recording
- Editing titles or goes into editing menu
- Deleting titles (DVD only)
- Start dubbing
- Changing input channels
- Using any functions in “Disc Edit” or “HDD Menu”
- Selecting following menus:
“General Setting” ➔ “Display” ➔ “V-Chip” ➔ “Downloadable Rating”
“General Setting” ➔ “Channel” ➔ “Auto Channel Preset”
“General Setting” ➔ “Channel” ➔ “Manual Channel Preset”
• The autostart recording will automatically resume for
new recording
For how to playback the autostart recording, refer to
“Playing Back the Autostart Recording” on page 76.
CHANNEL
Recording the Contents of the Autostart Recording
SETUP
DISC MENU
HDMI
1
When watching TV program through
this unit’s tuner, use [H], [E] or
[V.REPLAY] to locate your desired
point to start recording.
• The autostart recording information will
appear. Refer to page 23.
TITLE
2:59:44 / 3:31:31
OK
RETURN
DISPLAY
V.REPLAY
R
V.SKIP
7:10AM
10:42AM
10:10AM
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
2
Press [REC] to start recording.
100/100
I
1/ 1
0:00:34 / 0:32:34
HDD
HDD SP
From the selected point, the contents of the
autostart recording become a recording title in
the HDD while the unit continues to record the
current content of the channel.
Note
• In the autostart recording, when you display the DTV
program information, the information will be
recorded as the part of the picture.
• If there is not enough recordable space on HDD to
record from the selected point to current point, you
cannot record the content of autostart recording.
• When you record the content of the autostart
recording, the recording mode will be SP.
• When you are recording the contents of the autostart
recording, if you record the part that is copy-protected,
“Copy guard detected.” appears and you are not able to
watch the part.
46
EN
1h53m
3
Press [STOP C] twice to stop
recording.
The recording stops and new autostart recording
begins.
• If you press [STOP C] once, the image on the
TV screen goes back to current content of the
channel while the recording continues.
TIMER RECORDING
SOURCE
Guide to Timer Programming Display
3
1
2
Timer Programming
FEB/05/10 10:30 AM 69.1 SP
THU FEB/04 11:30AM
SP (1:00)
Date
FEB/05
Start
End
10:30AM 11:30AM
New Program
CH
DTV69. 1
1/1
OPEN/
CLOSE
4
ABC
DEF
GHI
JKL
K
MNO
M
PQRS
Q
TUV
U
WXYZ
SPACE
P
CLEAR
AUDIO
REPEAT
SETUP
HDMI
TITLE
OK
O
RETURN
DISPLAY
V.SKIP
1
2
Press [TIMER].
Use [K / L] to select “New Program”,
then press [OK].
Playback
V REPLAY
1 Title of a timer program (Contains date, time, channel,
recording mode of the program)
2 Current date and time
3 Recording mode, and length of the recording
4 Timer program list
5 Total number of pages and current page (6 pages
maximum)
6 Recording media (“ ” (HDD) or “ ” (DVD))
Recording
DISC MENU
CHANNEL
5
Basic Setup
.@/:
6
Connections
STANDBY-ON DTV/TV
Introduction
You can program the unit to record up to 36 programs
within a month in advance. Daily or weekly program
recordings are also available.
Before recording, make sure
• Set the clock before setting a timer programming.
• If you are recording to a disc, insert a recordable disc
with enough recordable space.
Timer Programming
THU FEB/04 11:30AM
Date
RAPID PLAY
HDD
DVD
TIMER
REC MODE
REC
CH
Editing
D.DUBBING
Start
End
New Program
1/1
• If there are 6 or more programs, use
[H / G] to change pages.
Date
FEB/05
CH
DTV69. 1
Start
--:-REC To
HDD
End
--:-Mode
SP
SP
JAN/01
Daily
MON-SAT
MON-FRI
When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st
SAT
FRI
SUN
Español
• If you have not set the clock yet:
Entry screen for the clock setting will appear instead
of the timer programming list at step 1. Continue
with the step 5 in “Manual Clock Setting” on page 34
before setting a timer programming.
• Use [s / B] to move the cursor to the left and the
right in the entry screen for the timer programming.
• You cannot make a program whose recording time
exceeds 12 hours.
2h00m
Others
Note
Function Setup
3
Use [K / L] to enter the date, then
press [B].
JAN/31
Instructions continue on the next page.
EN
47
TIMER RECORDING
4
Use [K / L / s / B] or [the Number
buttons] to enter the start and end
time, then press [B].
Date
FEB/05
CH
DTV69. 1
Start
10 : 30AM
REC To
HDD
7
End
--:-Mode
SP
SP
e.g.) external input mode
Start
10 : 30AM
REC To
HDD
End
11 : 30AM
Mode
SP
SP
10
Start
10 : 30AM
REC To
HDD
End
11 : 30AM
Mode
SP
SP
1h00m
e.g.) digital mode
Date
FEB/05
CH
DTV69. 1
Start
10 : 30AM
REC To
HDD
End
11 : 30AM
Mode
SP
SP
6
e.g.) recording to DVD
Start
10 : 30AM
REC To
DVD
1h00m
Start
10 : 30AM
REC To
DVD
End
11 : 30AM
Mode
SP
SP
1h00m
Auto recording mode select...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
automatically to complete recording the program.
Date
FEB/05
CH
DTV69. 1
Start
10 : 30AM
REC To
DVD
End
11 : 30AM
Mode
Auto
Auto
1h00m
• “Auto” is only available for one program in the timer
program list.
Alternate recording (DVD only)...
In the following cases, the unit will detect it and
automatically record to the HDD even when DVD is
selected as the recording media.
- If there is no recordable disc in the unit
- If the disc does not have enough space to complete the
recording
- If the material is “copy-once” program and prohibited to
be recorded on a DVD
- If the disc is not available because the repairing process is
canceled halfway
This feature is available only for timer recording. Not
available for one-touch timer recording.
8
Press [OK] when all items are
entered.
will appear on the front panel display.
Timer Programming
FEB/05/10 10:30 AM 69.01 SP
SP (1:00)
THU FEB/04 11:30AM
End
11 : 30AM
Mode
SP
SP
End
11 : 30AM
Mode
SP
1h00m
Use [K / L] to select the recording
media (“HDD” or “DVD”), then press
[B].
Date
FEB/05
CH
DTV69. 1
Date
FEB/05
CH
DTV69. 1
1h00m
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Use [K / L] or [the Number buttons] to select
the channel number to record, then press [B].
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 49
for more details.
e.g.) analog mode
Date
FEB/05
CH
Start
10 : 30AM
REC To
DVD
Refer to “Recording Mode” on page 42.
• You can check the remaining recordable space
of the disc when you select the recording mode.
2h00m
Use [K / L / s / B] to select analog
(“- - -”) / digital (“DTV”) mode or
external input (L1 / L2), then press
[B].
Date
FEB/05
CH
L1
Date
FEB/05
CH
DTV69. 1
SP
• You cannot make a program whose recording
time exceeds 12 hours.
5
Use [K / L] to select a recording mode.
Date
FEB/05
Start
End
10:30AM 11:30AM
New Program
CH
DTV69. 1
1h00m
1/1
Your program setting is now stored.
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 49.
48
EN
TIMER RECORDING
Introduction
How to select a channel number for the timer recording
For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog CATV
For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13125), the channel will be decided as soon as you enter the channel number.
Digital TV
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Digital CATV
For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14135), the channel will be decided as soon as you enter the channel number.
minor channels
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Connections
Analog TV
<Hint>
Basic Setup
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel you are selecting exists.
[K / L] does not skip the non-existed minor channels.
To stop the timer recording in progress
If the timer program did not complete correctly,
the error number appears in the timer
programming list.
Timer Programming
Recording
1) Press [STOP C] on the remote control.
2) Confirmation message will appear. Select “Yes”, then
press [OK].
• To stop the timer recording immediately, press
[C STOP ] on the unit.
FRI FEB/05 1:00PM
Checking, canceling, or correcting the timer
programming information
Note
E45
Copy prohibited
program
E46
It is impossible to
record additionally
on a disc recorded
by other units
when setting “
Make Recording
Compatible” to “OFF”.
E47
Already 600 titles
recorded on the HDD
E49
There was no disc
space on the HDD
at the starting time
for the HDD timer
recording.
E50
HDD recording is
canceled due to the
insufficiency of the
disc space on the
HDD.
Unrecordable disc
E25-26 Copy prohibited
program
E29
Disc protected
E30
Disc full
E35
PCA full *1
E36
Already finalized
video format disc
E40
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
E41
Power failed
E42
No disc when
recording
E43
Already 49 titles
recorded
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
• Timer program with an error number will be cleared
once the entry screen for the program is displayed.
*1 PCA is a disc's space reserved for recording test.
EN
49
Español
• Press [TIMER] to check the timer recording in progress.
• As to the timer recording in progress (which is shown in red
in the timer program list), you only can edit the end time.
The changes made during recording will be recognized as
only specific to that recording in progress and it will not
affect the daily or the weekly recording setting.
E24
Others
3-A) To delete the timer program:
1 Use [K / L] to select the program you want to
delete, then press [OK].
2 Use [K / L] to select “Delete”, then press [OK].
Confirmation window will appear.
3 Use [K / L] to select “Yes”, then press [OK].
3-B) To correct the timer program:
1 Use [K / L] to select the program you want to
correct, then press [OK].
2 Use [K / L] to select “Program Change”, then
press [OK].
3 Correct the timer program by using
[K / L / { / B], then press [OK].
4) Press [TIMER] to exit.
Already 254 chapters
recorded
Function Setup
CH
DTV69. 1
E1-22 Recording error other E44
E37-39 than below
Editing
FEB/05/10 10:30 AM 69.1 SP
THU FEB/04 11:30AM
SP (1:00)
Start
End
10:30AM 11:30AM
New Program
CH
DTV69. 1
Each error number means:
Timer Programming
Date
FEB/05
Start
End
10:30AM 11:30AM
New Program
Playback
1) Press [TIMER].
2) Check the information.
E41
Date
FEB/05
TIMER RECORDING
Hints for Timer Recording
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer
programming will be lost.
• When recording to a DVD, if a disc is not inserted, the unit will perform the alternate recording to the HDD (refer to
page 48).
• When a timer recording is completed, the unit will ask you whether to turn the unit to the standby mode if there is no
timer recording which starts within 5 minutes, except under conditions listed below.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
• The unit will be turned to the standby mode automatically if you select “Yes” or if you do not reply in 1 minute.
• When the programmed starting and ending time are earlier than the current time, the setting will not be accepted
and be cleared for redoing.
• If the starting time is earlier and the ending time is later than the current time, the recording will start right after you
press [OK] at step 8 on page 48.
• You cannot change the audio language for the timer recording of digital TV broadcasting.
• Timer recording whose recording time exceeds 12 hours cannot be made.
• It is prohibited to turn the unit to the standby mode from 4 minutes before the programmed starting time.
• It is prohibited to change channel from 15 seconds before the programmed starting time.
• [REC] does not work from 2 minutes before the programmed starting time. If it comes to 2 minutes before the
starting time during regular or one-touch timer recording, the recording in progress will be stopped.
• Playback of DVD/CD is prohibited from 2 minutes before the programmed starting time when the recording media is
DVD. If it comes to 2 minutes before the programmed starting time during DVD playback, the playback will be
stopped.
The Priority of Overlapped Settings
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over
the programs with the later start time when timer programs overlap.
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.
• When 2 or more timer programs have the same start time, the program set first will be given priority.
• A timer recording of lower priority will be canceled or start from the middle.
• Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.
PROG. A
PROG. B
actual
PROG. A
PROG. B
recording
The first 2 minutes (at the longest) will be cut off.
Note for DVD recording
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minute or more, this
program will be displayed with error number E40 in the
timer programming list.
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
50
EN
SPECIAL RECORDING
2) Load the disc that includes a title to be overwritten.
It takes a while to display
the title list.
3) Press [REC MODE] repeatedly to select a recording
mode.
Refer to “Recording Mode” on page 42.
4) Use [K / L] to select a title to be overwritten, then
press [OK].
2) Use [K / L] to select “Play”, then press [OK].
Playback will start.
3) Press [PAUSE F] at the point from which you want
to start overwriting.
4) Press [REC].
“F I DVD”, display menu, channel, and the time lapse
will be displayed as illustrated on the left.
5) Select the channel you want to record.
(Refer to page 29 on how to select a channel.)
SP(2Hr)
6) Press [REC] again.
Overwriting recording starts.
NOV/21/10 11:00AM CH12 SP
NOV/21/10 0:20:44
2
NOV/22/10 11:35AM CH13 EP
NOV/22/10 0:10:33
7) Press [STOP C] to stop recording.
3
EMPTY SPACE
1:37:52 SP (2Hr)
1
SP(2Hr)
NOV/21/10 11:00AM CH12 SP
NOV/21/10 0:20:44
2
Playback
This operation may take a
while to be completed.
5) Use [K / L] to select “Overwrite”, then press [OK].
Play
Edit
Overwrite
Recording
1
You can overwrite the existing title from the selected
position.
1) Follow the steps 1, 2 and 4 on the left.
Note
• Recording mode of the overwriting title is the same
as that of the original (overwritten) title when
overwriting in the middle of the title.
• Title name will not be overwritten.
Editing
6) Select the channel you want to record.
(Refer to page 29 on how to select a channel.)
e.g.) DVD+RW
selected title number
to be overwritten
1
1
Basic Setup
Title list will appear.
If the title list does not appear, press [TITLE].
Overwriting in the Middle of the Title
Connections
You can overwrite the existing title from the beginning.
1) Press [STANDBY-ON ].
Make sure that the TV input is set on the unit.
Introduction
Overwriting from the Beginning of
the Title
0:00:00
+RW
Function Setup
CH 12
F I DVD
DVD SP(2Hr)
2h00m
Others
7) Press [REC].
Overwriting recording starts.
The elapsed-time counter starts running.
8) Press [STOP C] to stop recording.
Title name is also overwritten.
This operation may take a
while to be completed.
Español
Note
• The remaining recording time is displayed on the
bottom right corner of the TV screen during
overwriting.
EN
51
SPECIAL RECORDING
Hints for Overwriting
When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that
following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion
please check if there is no important title after the overwriting point.
When overwriting title is shorter than the existing title:
(overwriting from the beginning of the title)
overwrite
recording : A
30 - 180 seconds will be cut off.
after
overwriting
existing title : B
title name : A
title name : B
When overwriting title is longer than the existing title:
(overwriting from the beginning of the title)
overwrite
recording : A
after
overwriting
existing title : B
title name : A
overwrite
recording : A
existing title : B
30 - 180 seconds will be cut off.
after
overwriting
title name : A
title name : C
existing title : C
When overwriting in the middle of the title:
overwrite
recording : A
existing title : B
30 - 180 seconds will be cut off.
after
overwriting
title name : B*
title name : B
*Overwritten section and the rest of the sections will
have the same title name as the original existing
title (B).
Note
• When a title name is overwritten, its index picture is also overwritten.
• “Auto Chapter” interval time is reset at the overwriting start point.
• A chapter mark is put at the beginning of the overwrite title when overwriting in the middle of the title.
52
EN
DUBBING
Introduction
Information on Dubbing
You can dub the contents of the HDD to DVD or vice verse. Before you start dubbing, refer to pages 41-43 to see the
recording compatibility.
Guide to Dubbing Menu Display
3
HDD
DVD
ABCDE
HQ (1Hr) (0:30:00) JAN/ 4/2010
Add
Delete All
Dubbing Start
3000 MB
Dubbing List
1.ABCDE
2.JAN/ 4/10 1:00AM CH22
3.JAN/ 7/10 11:00AM CH96
1
2
3
4
5
6
Dubbing direction
Selected title information
Dubbing menu
Remaining recordable space
Dubbing list
Current page number / total number of pages
5
6
Recording
Playback
“Auto”
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available automatically.
• The recording may be cut short when the available
recording space of the disc is too limited.
Basic Setup
1/1
4
“High”
This unit is compatible with the high speed dubbing from
HDD to DVD.
If you dub a title recorded in SLP mode to DVD+R/-R,
dubbing speed will be 24 times at the maximum. To
perform the high speed dubbing, set the recording mode
to “High”. Dubbing speed will vary depending on original
recording mode.
• Duration of high speed dubbing will vary depending on
the recording mode or the title amount.
• High speed dubbing is not available when;
- recording mode is set to other than “High”.
- dubbing from a DVD to the HDD.
- there is not enough space in the disc.
• During dubbing (except for high speed dubbing), you can
use [C STOP] on the front panel or press [STOP C] for 2
seconds on the remote control, and any other buttons will
be invalid.
Connections
1
2
Recording Mode for Dubbing
Note on dubbing
Function Setup
Others
Other modes
Refer to page 42 for the information on other modes.
Editing
• During normal dubbing, you can watch the playback
picture of the title being dubbed (the audio cannot
be changed). During high speed dubbing, however,
the playback picture will not appear.
• Dubbing of a “copy-once only” program is not
possible with this unit.
• If you stop the dubbing halfway, the contents will be
dubbed up to the point where you stop the dubbing
(except for the high speed dubbing). With high
speed dubbing, nothing will be dubbed if you stop it
halfway.
• To stop the dubbing in progress, press [C STOP] on
the front panel or press [STOP C] for 2 seconds on
the remote control.
Español
EN
53
DUBBING
Settings for an External Device
Connect the external device properly to the unit by using either L2 and L3 (Front) or L1 (Rear) input jacks.
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front) or L1 (Rear).
Use S-video or the RCA audio/video cables for this connection.
When connecting a DVC (digital video camcorder), use DV-IN jack of L3 (Front).
or
S VIDEO
OUT
VIDEO
OUT
AUDIO OUT
L
R
DV OUT
VIDEO
OUT
external device
AUDIO OUT
R
L
S VIDEO
OUT
(camcorder, VCR etc.)
S-video
cable
or
RCA
video
cable
RCA
audio
cable
DV cable
(4-pin)
RCA
video
cable
RCA
audio
cable
S-video
cable
or
VIDEO
IN
Y
EO
UT
L
L
PB CB
or
R
AUD O IN
L1
L2
L3
IN
R
S VIDEO AUD O OUT
PR CR
COMPONENT
VIDEO OUT
OUT
S VIDEO
L1
to L2 & L3 IN
to L1 IN
N
VIDEO VIDE
OUT
Y
L
OUT
R
ANTENNA
AUD O N
L1)
N
R
S VIDEO UD O OU
OUT
COAXIAL
S VIDEO
front of this unit
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
HDMI
TITLE
OK
O
RETURN
DISPLAY
V REPLAY
rear of this unit
1
2
3
4
5
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Video”, then
press [OK].
Submenu will appear.
Use [K / L] to select “Video Input”,
then press [OK].
Use [K / L] to select desired external
input, then press [OK].
Video Input
L1 (Rear)
L2 (Front)
Use [K / L] to select the input jack
type to connect, then press [OK].
If you want to use VIDEO IN jack, select “Video In”.
If you want to use S-VIDEO IN jack, select
“S-Video In”.
L1 (Rear)
V.SKIP
Video In
S-Video In
54
EN
6
Press [SETUP] to exit.
DUBBING
Before recording from an external device, refer to the
instructions for the connection on page 54.
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
CHANNEL
HDMI
DISC MENU
OK
RETURN
DISPLAY
V REPLAY
V.SKIP
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
• If the external device is connected to the rear
of this unit, select L1.
• If the external device is connected to the front
of this unit, select L2 or L3.
• If you are connecting the digital video
camcorder to the DV-IN jack of this unit, refer
to pages 55-58.
• You can also select L1 or L2 channel by using
[the Number buttons].
e.g.) For L1, press [0], [0], [1].
Refer to “Recording Mode” on page 42.
Press [I RECORD] on the unit to start
recording.
Start playback on the external device
to record from.
Function Setup
Press [C STOP] on the unit to stop
recording.
Editing
1 1 6
Select the appropriate external input
channel (L1, L2 or L3) by pressing
[SOURCE] or [CHANNEL / ].
Playback
3
4
5
6
Press [REC MODE] repeatedly to
select a recording mode.
TITLE
It takes a while to load the disc.
Recording
1
2
Insert a recordable disc (refer to page
27 on how to insert a disc).
Basic Setup
.@/:
OPEN/
CLOSE
Connections
SOURCE
STANDBY-ON DTV/TV
If you are recording to the HDD, press [HDD] first, then
proceed to step 2.
If you are recording to a disc, press [DVD] first.
Introduction
Recording from an External Device
This operation may take a
while to be completed.
4
Others
Español
EN
55
DUBBING
Information on DV Dubbing
Guide to DV and On-Screen Display
This function helps you to easily dub the contents of the DVC (digital video camcorder) to HDD or DVD.
You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or
reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is
compliance with the IEEE1394 standards. When you connect to DV-IN jack on the front of this unit, select “L3(DV-IN)”
position by using [SOURCE] or [CHANNEL / ] on the remote control and press [DISPLAY] to show the DV dubbing
information for the operation of your DVC.
When the DVC is
in video mode...
1
1/ 1
When the DVC is not
in camera mode...
1/ 1
1/ 1
1/ 1
+RW
2
Control
DV Audio
Start Rec
DVD
Stereo1
DVD SP(2Hr)
3
+RW
L3 (DV-IN)
AB-1234
0:12:34
The menu changes according to
what mode of DVC.
Switch the mode on the DVC to
playback mode for the dubbing
information.
DVD SP(2Hr)
1h00m
4
5
L3 (DV-IN)
AB-1234
0:12:34
7
1h00m
6
The following instructions are described with the operations using the remote control of this unit.
1. DV icon
2. Indicator of active device
• When “Control” is highlighted,
press [OK] to display the item
selection. Use [K / L] to select the
device you wish to operate, then
press [OK] to activate.
• Select “HDD” / “DVD” to control
this unit.
• Select “DV Input” to control your
DVC.
3. Recording audio mode
• If the DVC is not in stop mode,
“DV Audio” can be selected. Press
[OK] to display the item selection
and then use
[K / L] to select the audio you
wish to output. Press [OK] again
to activate.
• Select “Stereo1” to dub the stereo
sound.
• Select “Stereo2” to dub the sound
with after recording sound.
• Select “Mix” to dub the stereo1
and stereo2.
4. Indicator of dubbing function
• When the unit is ready for
dubbing, “Start Rec” will appear.
• When the unit is in dubbing,
“Pause Rec” will appear.
5. Channel position
• When you select “L3(DV-IN)” by
using [SOURCE] or
[CHANNEL / ], “L3(DV-IN)”
will appear.
56
EN
6. Product name of your DVC
• If the unit cannot recognize the
input signal from the DVC or the
unknown product, “No Device” or
“****” will appear instead.
7. Status of the current operation
and the time counter
Each icon means (Available icons
may vary depending on the DVC):
DVC is in stop mode.
DVC is in playback mode.
DVC is in pause mode.
DVC is fast forwarding.
(standard speed)
DVC is fast forwarding.
(faster than above)
DVC is fast forwarding.
(faster than above)
DVC is slow forwarding.
(standard speed)
DVC is slow forwarding.
(faster than above)
DVC is slow forwarding.
(faster than above)
DVC is fast forwarding.
(in stop mode)
DVC is fast reversing.
(in stop mode)
DVC is fast reversing.
(standard speed)
DVC is fast reversing.
(faster than above)
DVC is fast reversing.
(faster than above)
DVC is in slow reverse
playback.
DVC is in recording.
DVC is in recording pause
mode.
DUBBING
Introduction
DVC to HDD / DVD Dubbing
Before recording from DVC, see page 54 for connection
instructions.
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
If you are recording to the HDD, press [HDD] first.
If you are recording to a disc, press [DVD] first.
1
Use [SOURCE] or [CHANNEL
select “L3(DV-IN)”.
/ ] to
Basic Setup
.@/:
OPEN/
CLOSE
Connections
SOURCE
STANDBY-ON DTV/TV
Preparing for DV dubbing (DVC to HDD):
• Make sure your DVC is in video mode.
Preparing for DV dubbing (DVC to DVD):
• Insert a recordable DVD.
• Make sure your DVC is in video mode.
L3 (DV-IN)
AB-1234
0:00:00
HDMI
TITLE
RETURN
V REPLAY
V.SKIP
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Press [REC MODE] repeatedly to
select a recording mode.
(Refer to page 42.)
Press [DISPLAY].
Playback
RAPID PLAY
2
3
4
Recording
OK
O
DISPLAY
Press [OK] to display the item
selection. Use [K / L] to select
“DV Input”, then press [OK].
1/ 1
Editing
1/ 1
+RW
DVD
DV Input
L3 (DV-IN)
AB-1234
0:12:34
5
Function Setup
DVD HQ(1Hr)
1h00m
Press [PLAY B] to find where you
wish to start dubbing. Then, press
[STOP C] where you wish to start
dubbing.
Others
EN
57
Español
Instructions continue on the next page.
DUBBING
6
7
Use [K / L] to select “Start Rec”, then
press [OK].
The dubbing will start.
To stop dubbing;
A) Press [C STOP] on the unit. or
B) Use [K / L] to select “Control”,
then press [OK].
Use [K / L] to select “HDD” /
“DVD”, then press [OK].
Then press [STOP C].
Note for DV dubbing
• If you press [PAUSE F] at step 5, the tape will rewind to the point a few seconds preceding the paused point.
When you press [OK] at step 6, then, it will start dubbing when it comes to the paused point.
• The unit does not send out the output signal to DVC.
• For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.
• Do not connect more than 1 DVC.
• The unit can only accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.
• If no video signal is detected from the DVC during DVC to HDD or DVD dubbing, the recording will be paused and
“I” will flash on the TV screen. The recording will resume when the unit detects the video signal again.
• When the DVC is in camera mode, refer to “Guide to DV and On-Screen Display” on page 56.
• Date / time and cassette memory data will not be recorded.
• Pictures with a copy-guard signal cannot be recorded.
• A DV terminal is a terminal that can use the transmission mode conforming to the IEEE 1394 standards called “Fire
Wire”. It serves as the interface that connects the PC and peripheral device such as “i.LINK” (registered trademark
of SONY). It enables digital dubbing between DV devices with little degradation.
• You cannot dub from DVC to both HDD and DVD at the same time.
58
EN
DUBBING
Introduction
Selected Title Dubbing
STANDBY-ON DTV/TV
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
CHANNEL
1
2
Press [SETUP] in stop mode.
Use [K / L] to select “Dubbing”, then
press [OK].
Setup
General Setting
Timer Programming
Title List
Basic Setup
.@/:
OPEN/
CLOSE
Connections
Preparing for dubbing (HDD to DVD):
• Insert a recordable DVD.
Preparing for dubbing (DVD to HDD):
• Insert a disc to be dubbed.
Disc Edit
SETUP
HDMI
HDD Menu
Dubbing
Recording
DISC MENU
TITLE
OK
O
RETURN
DISPLAY
V REPLAY
V.SKIP
Use [K / L] to select “HDD
then press [OK].
DVD”,
Playback
3
HDD to DVD
DVD to HDD
Use [K / L] to select “DVD
then press [OK].
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
HDD”,
e.g.) HDD ➔ DVD
Dubbing
Use [K / L] to select “Add”, then press
[OK].
HDD
DVD
Function Setup
4
DVD
HDD
Editing
HDD
DVD
3000 MB
Dubbing List
Others
Add
Delete All
Dubbing Start
1/1
• If you have registered any dubbing before,
they will be listed in the dubbing list.
EN
59
Español
Instructions continue on the next page.
DUBBING
5
6
Use [K / L / s / B] to select a desired
title, then press [OK].
At the upper left of each title, the number will
appear in the order of selection .
8
Repeat step 5 until you register all
the titles to be dubbed, then press
[D. DUBBING].
Use [s / B] to select a desired
recording mode, then press [OK].
e.g.) HDD ➡ DVD
HDD
DVD
Please select REC MODE.
High
HQ
SP
SPP
LP
EP
Dubbing Titles
e.g.) HDD
SLP
Auto
500 MB
3000 MB
Title List
ABCDE
12:00AM (10:00:00) JAN/ 4/10
2
CH10 SP
1
1
2
3
3
4
5
5
4
6
Press ‘D. DUBBING’ to confirm.
1/6
The titles are now registered in the dubbing list.
When you go back to the title list to add another
title, titles already registered are shown with a
check mark.
To delete a title:
1 Go to the dubbing list, then use [K / L] to
select a title. Then press [OK].
2 Use [K / L] to select “Delete”, then press
[OK].
3 Use [K / L] to select “Yes”, then press [OK].
To move a title:
1 Go to the dubbing list, then use [K / L] to
select a title. Then press [OK].
2 Use [K / L] to select “Move”, then press [OK].
3 Use [K / L] to select a desired insert point,
then press [OK].
To erase all the titles in the dubbing title list:
1 Use [K / L] to select “Delete All” in the
dubbing menu, then press [OK].
2 Use [K / L] to select “Yes”, then press [OK].
• To go back and forth between dubbing menu
and dubbing list, use [s / B].
7
60
After adding all the titles you want,
use [K / L] to select “Dubbing Start”
in the dubbing menu, then press
[OK].
EN
Confirmation message will appear.
• Depending on the dubbing direction, the
available recording mode varies.
• When dubbing from HDD to DVD, you can
select “High” to perform the high speed
dubbing (refer to “Recording Mode for
Dubbing” on page 53 for more details).
9
Use [K / L] to select “Yes”, then press
[OK].
Start Dubbing?
Yes
No
Dubbing will start.
• It may take awhile to prepare for the dubbing.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote
control.
When you are dubbing from HDD to DVD, the
confirmation message will appear, then select
“Yes”.
One-touch Dubbing...
With one-touch dubbing, you can start dubbing right
away with just one touch.
To dub the contents in a DVD which is finalized on
other unit, use this function.
During playback of the title you want to dub, press
[D.DUBBING].
If you are playing back a DVD, DVD to HDD dubbing will
start right away.
If you are playing back HDD, HDD to DVD dubbing will
start right away.
• The dubbing will start from the beginning of the title
being played back.
• The unit will dub only the title being played back.
• When dubbing from HDD to DVD, recording mode will
automatically be set to “High” whenever the conditions
are met (refer to page 53). Otherwise, the last selected
recording mode will automatically be applied.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote control.
When you are dubbing from HDD to DVD, the
confirmation message will appear, then select “Yes”.
DUBBING
Introduction
One Title Dubbing (HDD to DVD only)
This function lets you select one specific title from the
title list for dubbing.
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
HDMI
TITLE
OK
O
V REPLAY
V.SKIP
RAPID PLAY
HDD
DVD
TIMER
REC MODE
REC
Use [K / L] to select “Yes”, then press
[OK].
Start Dubbing?
Yes
No
Dubbing of the selected title will start.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote
control.
Editing
D.DUBBING
4
Resume Playback
Play From Start
Edit
Title Delete
Delete Multiple Titles
Dubbing
Playback
RETURN
DISPLAY
Use [K / L] to select “Dubbing”, then
press [OK].
Recording
ABC
Use [K / L / s / B] to select a desired
title to dub, then press [OK].
Basic Setup
.@/:
OPEN/
CLOSE
1
2
3
Press [HDD] first.
Press [TITLE].
Connections
SOURCE
STANDBY-ON DTV/TV
Preparing for dubbing:
• Insert a recordable DVD.
Function Setup
Others
Español
EN
61
PROTECTING A DISC
To prevent accidental recording, editing or erasing of the
titles, you can protect them from the “Disc Edit” menu.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
SETUP
AUDIO
REPEAT
DISC MENU
OPEN/
CLOSE
CHANNEL
1
2
3
Press [SETUP].
Use [K / L] to select “Disc Edit”, then
press [OK].
Use [K / L] to select “Disc Protect OFF
ON”, then press [OK].
e.g.) DVD+RW
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
HDMI
TITLE
OK
O
RETURN
DISPLAY
V REPLAY
4
V.SKIP
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Note
To cancel the disc protection:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
ON” at step 3.
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect ON OFF
To release the protection for the disc, select “Disc
Protect ON OFF” at step 3, then follow rest of the
procedures.
EN
Protect this disc?
Yes
No
RAPID PLAY
62
Use [K / L] to select “Yes”, then press
[OK].
The disc is now protected.
This operation may take a
while to be completed.
PLAYING THE DISCS ON OTHER DVD PLAYERS
Introduction
Finalizing a Disc
STANDBY-ON DTV/TV
SOURCE
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
CHANNEL
“Disc Edit” menu will appear.
Use [K / L] to select “Finalize”, then
press [OK].
Use [K / L] to select “Yes”, then press
[OK].
Finalize disc?
Yes
No
HDMI
Recording
ABC
Use [K / L] to select “Disc Edit”, then
press [OK].
Finalizing will start.
DISC MENU
TITLE
Finalizing
OK
V REPLAY
V.SKIP
90%
To cancel finalizing...
Playback
RETURN
DISPLAY
Basic Setup
.@/:
OPEN/
CLOSE
1
2
3
4
Press [SETUP].
Connections
You will need to finalize DVD+R, DVD-RW or DVD-R to
play them back on other DVD players.
Finalizing may take several minutes up to an hour.
A shorter recording period on the disc will require a
longer time period for finalization. Do not unplug the
power cord during finalization.
(DVD-RW only)
• To cancel finalizing at step 4, press [STOP C], select
“Yes” with [K / L], then press [OK]. Finalizing is
canceled and the unit will be in stop mode.
RAPID PLAY
HDD
DVD
TIMER
REC MODE
REC
Yes
No
Finalizing
• If
appears when pressing [STOP C], you cannot
cancel finalizing because the finalizing has been in
certain progress.
• When selecting “No” and pressing [OK] or [RETURN],
finalizing will be continued.
• You cannot cancel finalizing a DVD+R/DVD-R once it
has started.
This operation may take a
while to be completed.
Others
• Once you have finalized a DVD+R/ DVD-R, you
cannot edit or record anything on that disc.
• There is no need to finalize DVD+RW.
• When you insert a DVD-RW finalized with this unit,
“Undo Finalize” will appear instead of “Finalize”.
5%
Disc Edit
Edit Disc Name
Erase Disc
Undo Finalize
Disc Protect ON
OFF
5
Finalizing is completed.
Español
To release the finalizing for the disc, select “Undo
Finalize” at step 3.
* DO NOT turn the power off or to the standby mode
during finalization, this will result in a malfunction.
Function Setup
Note
Editing
Do you want to cancel ?
D.DUBBING
EN
63
PLAYING THE DISCS ON OTHER DVD PLAYERS
Auto Finalizing
You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
timer recordings and at the end of the disc space.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
HDMI
TITLE
OK
O
RETURN
DISPLAY
V REPLAY
V.SKIP
1
2
3
4
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
5
Use [K / L] to select “ON”, then press
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Recording”,
then press [OK].
“Recording” menu will appear.
Use [K / L] to select “Auto Finalize”,
then press [OK].
Use [K / L] to select “Disc Full” or
“End of Timer Rec”, then press [OK].
Auto Finalize
Disc Full
End of Timer Rec
e.g.) “Disc Full”
Disc Full
ON
OFF
RAPID PLAY
Your setting will be activated.
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Note
• This function is not available after finishing daily or
weekly program recording.
64
EN
6
Press [SETUP] to exit.
INFORMATION ON PLAYBACK
Playable Discs and Files
Unplayable Discs
Playable discs
Logos
DVD-video
Color Systems
DVD+R
DVD-RW
(Finalized video mode discs only)
DVD-R
(Finalized video mode discs only)
Recording
DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
This unit uses NTSC, so a DVD you play back must be
recorded in the NTSC system. You cannot play back a
DVD recorded in other color systems.
Basic Setup
DVD+RW
The following discs will not play back on this unit.
• CD-ROM
• Compact Disc-Interactive (CD-I)
• DVD-RAM
• Video Single Disc (VSD)
• DVD-ROM
• DVD-audio
• Unfinalized disc
• DVD or CD contains Windows Media™ Audio/DivX® files
• DVD-R or DVD-RW recorded in VR mode or non
compatible recording format
• Blu-ray Disc
• HD DVD
• Super Video CD
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD
layer cannot be heard.
Connections
This unit is compatible to play back the following discs.
To play back a DVD, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos. Other disc types are not guaranteed to
play back.
Introduction
Before you play back a DVD, read the following information.
Region Codes
CD-DA (audio CD)
video CD
Editing
CD-RW
Playback
This unit has been designed to play back a DVD
with region 1. A DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVDs that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you cannot
play back the DVD in this unit.
The number inside the globe refers to region of the
world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.
Function Setup
CD-R
Kodak Picture CD
Others
Playable files
MP3
Media
CD-RW/-R
JPEG
is a trademark of DVD Format/Logo Licensing Corporation.
Español
EN
65
INFORMATION ON PLAYBACK
PBC (playback control) for Video CD
You can select images or information on the menu
screen by activating the PBC (playback control) function
of the video CD.
This unit conforms to ver.1.1 and ver. 2.0 of video CD
standard with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback
picture as well as music CD.
Ver.2.0 (with PBC function): While using a video CD with
PBC function, “PBC” appears on the TV screen.
Note
• PBC setting turns to “ON” when loading video CD
with PBC function, thus, even after setting PBC to
“OFF” and ejecting the video CD then reloading the
video CD, this setting turns to “ON” automatically.
• Some operations cannot be performed while PBC
function is on. Cancel PBC function temporarily to
perform those operations by following the
instruction below.
1) Press [SETUP].
2) Use [K / L] to select “DISC Playback Mode”, then
press [OK].
“DISC Playback Mode” menu will appear.
3) Use [K / L] to select “PBC (Video CD only)”, then
press [OK].
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
Your setting will be activated.
You can play back interactive software using menu
screens. Refer to instructions in the video CD.
66
EN
Hint for HDD / DVD Playback
The contents of HDD / DVD are generally divided into
titles. Titles may be further subdivided into chapters.
HDD / DVD
title 1
chapter 1 chapter 2
track 1
chapter 1
title 2
chapter 2
audio CD, video CD
track 2
track 3
track 4
chapter 3
track 5
MP3, JPEG
folder 1
file 1
folder 2
file 2
file 3
file 4
file 5
BASIC PLAYBACK
If you are playing back the titles in HDD, press [HDD]
first, then proceed to step 2.
If you are playing back the titles in DVD, press [DVD] first.
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
Align the disc to
the disc tray guide.
* Make sure the disc is compatible with this unit.
(Refer to page 65 for the list of compatible discs.)
HDMI
OK
RETURN
DISPLAY
V REPLAY
V.SKIP
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
If you are playing back a DVD-video or video CD
with PBC function, a menu may appear.
Refer to “Using the Title / Disc Menu” on page 71.
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 72.
Playback
RAPID PLAY
2
3
Press [PLAY B] to start playback.
Recording
It may take a while to load
the disc.
TITLE
Basic Setup
.@/:
1
Insert a disc (refer to page 27 on how
to insert a disc).
Connections
STANDBY-ON DTV/TV
OPEN/
CLOSE
Introduction
Direct Playback
Editing
Function Setup
Others
Note
Español
• Some discs may start playback automatically.
• You can select images or information on the menu
screen by activating PBC (playback control) function
(page 66).
• If you insert a disc when the unit is in HDD mode,
playback will start automatically when you press
[DVD].
EN
67
BASIC PLAYBACK
Playback from the Title List
If you are playing back the titles in HDD, press [HDD]
first, then proceed to step 2.
If you are playing back the titles in DVD, press [DVD] first.
SOURCE
STANDBY-ON DTV/TV
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
1
Insert a disc (refer to page 27 on how
to insert a disc).
* Make sure the disc is compatible with this unit.
(Refer to page 65 for the list of compatible discs.)
CHANNEL
It may take a while to load
the disc.
HDMI
TITLE
2
For HDD, press [TITLE] to call up the
title list. For DVD, the title list will
automatically appear when you
insert a disc. Otherwise, press [TITLE]
or [DISC MENU].
• To exit the title list, press [STOP C].
• To resume the title list, press [TITLE].
OK
O
RETURN
DISPLAY
V REPLAY
3
V.SKIP
RAPID PLAY
Use [K / L / s / B] to select a desired
title, then press [OK].
<HDD title list>
Title List
JAN/ 4/10 12:00AM CH10 SP
12:00AM (1:00:00) JAN/ 4/10
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
CH10 SP
1
2
3
4
5
6
1/6
<DVD title list>
1
SP(2Hr)
NOV/21/10 11:00AM CH12 SP
NOV/21/10 0:20:44
2
NOV/22/10 11:35AM CH13 EP
NOV/22/10 0:10:33
3
EMPTY SPACE
1:37:52 SP (2Hr)
• For video CD, when “PBC (Video CD only)” in
the “DISC playback Mode” menu is set to “ON”,
the video CD main menu will appear when
inserting a disc. In such case, select a
numbered menu with [the Number buttons].
• Press [G] (for HDD) / [B] (for DVD) to display
the next page, and press [H] (for HDD) / [{]
(for DVD ) to display the previous page.
Note
• Some discs may start playback automatically.
• You can also start playback by pressing [PLAY B]
instead of [OK] at step 3.
68
EN
BASIC PLAYBACK
If you want to see disc information, press [{ ] when the
first page of the title list is displayed or press [ K ] when
the first title is selected but not when “Play”, “Edit” or
“Overwrite” is highlighted.
e.g.) DVD+RW
4
Use [K / L] to select “Play” (for DVD),
or select “Resume Playback” or “Play
from Start” (for HDD), then press [OK].
e.g.) DVD
Disc
DVD+RW
Total Titles
3
Disc Space Used
0:30:48
Disc Protect
OFF
Make Edits Compatible
Needed
1
Connections
Play
Edit
Overwrite
No Disc Name
Introduction
Note for DVD title list
SP(2Hr)
NOV/21/10 11:00AM CH12 SP
NOV/21/10 0:20:44
2
NOV/22/10 11:35AM CH13 EP
NOV/22/10 0:10:33
3
EMPTY SPACE
1:37:52 SP (2Hr)
Playback will start.
No Disc Name
Disc
DVD+R
Total Titles
5
1:30:48
Disc Protect
OFF
Finalize
Finalized
5
• Refer to “Resume Playback” on page 72.
Recording
Disc Space Used
Press [STOP C] once to stop playback
temporarily.
Basic Setup
e.g.) DVD+R
Playback
1. Disc name
(Default “No Disc Name”)
2. Disc type
(DVD+RW/DVD+R/ DVD-RW/DVD-R)
3. Total number of title
(include “EMPTY SPACE”)
4. Total time of recorded disc space
5. Status of disc protection
(“ON” is protected disc.)
6. Making edits compatible/finalize
• When DVD+RW is inserted:
If the disc needs to be set “Make Edits Compatible”,
“Needed” is displayed. Otherwise, “Not Needed” is
displayed. (Refer to page 98.)
• When DVD+R, DVD-RW or DVD-R is inserted:
If “Finalize” is done, “Finalized” is displayed.
Otherwise, “Unfinalized” is displayed.
Editing
Function Setup
Others
Español
EN
69
BASIC PLAYBACK
Playing Back an Audio CD and a CD-RW/-R with MP3 / JPEG Files
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
1
When an audio CD is inserted, the track list will
appear.
When a CD-RW/-R with MP3/JPEG files is
inserted, the file list will appear.
When you insert a CD-RW/-R mixed with MP3/
JPEG files, the playback media selection screen
will be displayed.
For MP3, select “Music”, for JPEG, select “Photo”.
• To exit the track/file list, press [STOP C].
• To resume the track/file list, press [TITLE].
CHANNEL
HDMI
OK
O
RETURN
V REPLAY
* Make sure the disc is compatible with this unit.
(Refer to page 65 for the list of compatible discs.)
It may take a while to load
the disc.
TITLE
DISPLAY
Press [DVD] first.
Insert a playable disc (refer to page
27 on how to insert a disc).
V.SKIP
2
Use [K / L] to select a desired folder
or track/file, then press [OK].
e.g.) File list
File List
DISC NAME
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Folder1
Folder2
JPEG file1
JPEG file2
JPEG file3
JPEG file4
JPEG file5
JPEG file6
1/ 2
Note
• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck.
• Files whose extension is other than “.mp3(MP3)” or
“.jpg / .jpeg(JPEG)” will not be listed.
• Some unplayable folders or files may be listed due to
the recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back on this unit.
70
EN
When selecting track/file:
Playback will start.
When selecting the folder (Not available for audio CD):
The files in the folder will appear.
Use [K / L] to select the file or folder you want to play
back, then press [OK].
• Press [PLAY B], [OK] or [B] to move to any lower
hierarchies.
• Press [s] or [RETURN] to move back to the previous
hierarchy.
Hints for audio CD tracks and MP3 / JPEG files:
• Folders are shown by
.
• Audio CD tracks are shown by
.
• MP3 files are shown by
.
• JPEG files are shown by
.
• The system can recognize up to 255 folders, up to 99
tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “...”. Unrecognizable characters will
be replaced with asterisks.
• If there are no files in the folder, “No Files” will be displayed.
It is recommended that files to be played back in this
unit are recorded under the following specifications:
<MP3>
• Sampling frequency
: 44.1 kHz or 48 kHz.
• Constant bit rate
: 112 kbps - 320 kbps
<JPEG>
• Upper limit
: 6,300 x 5,100 dots.
• Lower limit
: 32 x 32 dots.
• File size of image maximum : 12 MB.
BASIC PLAYBACK
Kodak Picture CD
1) Press [TITLE].
Picture CD
DVD or video CD with PBC function may contain a title
list, which describes the contents of the disc, or a disc
menu, which guides you through the available functions
in the disc.
Press [DVD] first.
1) Insert a disc (refer to page 27 on how to insert a
disc).
* Make sure the disc is compatible with this unit. (Refer
to page 65 for the list of compatible discs.)
1
2
3
4
5
6
2) Press [TITLE] or [DISC MENU] to call up the title list
or disc menu.
Basic Setup
It may take a while to load the disc.
Image 1
Connections
The Picture CD is a service to convert photographs taken
by a conventional film camera into digital data and write
the data on a CD. You can enjoy picture images on the TV
set by playing back the Picture CDs.
For details of Kodak Picture CD, contact a shop that
provides developing service of Kodak Inc.
Using the Title / Disc Menu
Introduction
Playing Back an Audio CD and a
CD-RW/-R with MP3/JPEG Files (cont’d)
3) Use [K / L / { / B] to make a selection, and then
press [OK] to enable your selection.
1/2
Notes on JPEG and Kodak Picture CD:
Pause
1) During playback, press [PAUSE F].
Playback will be paused.
Function Setup
• After track is displayed for 5 seconds or 10 seconds
(set in “Slide Show” on page 75) the display moves to
the next track.
During JPEG or Kodak Picture CD playback, press [B]
or [{] to rotate a picture 90 degrees clockwise or
counterclockwise respectively.
(Not available when the display menu appears.)
• You can select a numbered menu with
[the Number buttons] also.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
• [TITLE] or [DISC MENU] will not always be active
with all DVD.
• For video CD, when “PBC (Video CD only)” in “DISC
Playback Mode” menu is “ON”, the video CD main
menu will appear when inserting a disc.
Editing
3) Press [STOP C] to stop playback.
• Press [TITLE] to display the thumbnail again.
Note
Playback
2) Use [K / L / { / B] to select a desired track to be
played back, then press [PLAY B] or [OK].
An image will be played back from the selected track
and go to the next one in turn.
4) Press [STOP C] to exit.
Recording
• To exit the Picture CD thumbnail List, press [RETURN]
or [STOP C].
Arrow icons mean the title list includes a next or
previous page. Use [{ / B] in the direction of the
icon you wish to follow. You can also quick review the
six thumbnails at once between the first and last
pages by pressing [H] / [G].
Others
2) Press [PLAY B] to return to the normal playback.
Note
• On DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in the pause mode are blurred.
(Refer to page 106.)
Español
EN
71
SPECIAL PLAYBACK
Resume Playback
Note
You can play back from where you last stopped the disc.
1) During playback, press [STOP C].
The resume message will appear.
Resume ON
2) Press [PLAY B].
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
the same point even if you turn the unit to the standby
mode (HDD/DVD only).
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped.
For HDD:
You can set a resume point per every title.
For DVD+RW/+R, DVD-RW/-R, Video CD, Audio CD,
MP3 files and JPEG files:
You can set only one resume point per disc.
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
2x:
20x:
40x:
reverse (approx. speed)
5x:
20x:
40x:
Variable Skip / Variable Replay
During playback, you can skip forward or backward by
the amount of time you set in “Playback” menu. To set
the time amount, refer to “ 8 Variable Skip / Replay” on
page 106.
During playback, press [V.SKIP] if you want to skip
forward. Press [V.REPLAY] if you want to skip
backward.
Note
• For MP3/JPEG files, playback will resume from the
beginning of the file at which playback was stopped.
• Resume Playback is available when you play back the
video CD without PBC function.
• Some video CD with the PBC function resume
playback from the beginning of the track.
Fast Forward / Fast Reverse Playback
Rapid Playback
Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound output.
1) During playback, press [RAPID PLAY].
1) During playback, press [D] or [E].
Every time you press [D] or [E], approximate speed
will be changed as follows.
Fast forward or fast reverse playback across titles (for
HDD/DVD) or files (for MP3) is not possible.
40x
20x
5x
normal
speed
playback
2x
20x
EN
Bx1.3: Press [RAPID PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
B:
40x
For video CD, approximate forward/reverse speeds are
2x, 8x, 16x.
For audio CD, MP3 files, approximate speed is fixed at
/
).
8x with sound (indicated with
2) Press [PLAY B] to return to the normal playback.
72
Bx0.8: Press [RAPID PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.
Press [RAPID PLAY] 3 times to play back in
normal speed.
No effects.
2) Press [PLAY B] to return to the normal playback.
Note
• Audio (language) setting cannot be changed while
using this mode.
• This feature may not work at some point in a disc.
• Audio is PCM during rapid playback mode except
when using digital audio connection.
• When using digital audio connection (COAXIAL), the
LPCM sound (2 channel) will be output.
SPECIAL PLAYBACK
Introduction
Step by Step Playback
Chasing Playback during Recording
Note
• Only step by step forward playback is available for
playing back video CD.
Slow Forward / Slow Reverse Playback
Recording
• You can also use the special playback functions such
as [E], [D] etc. during chasing playback mode.
• [REC] is invalid during chasing playback.
• You can no longer fast forward the playback when it
comes to a few seconds before the current recording
point.
Note
Basic Setup
1) During recording, press [PLAY B].
Playback of the title you are recording will start from
the beginning.
• Elapsed playback time will be displayed in the front
panel display.
2) Press [STOP C] once to stop the playback, .
The front panel display will switch back to show the
elapsed recording time.
If you press [STOP C] twice, it will stop the recording.
Connections
1) During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2) Press [G] repeatedly.
Playback will advance one frame (or step) at a time
when you press [G] with the sound muted.
To play back step by step backward:
Press [H] repeatedly.
Every time you press the button, the playback will go
backward by one frame.
• Press and hold [H] / [G] to reverse / advance
continuously.
3) Press [PLAY B] to return to the normal playback.
You can play back a title being recorded from the
beginning while recording continues.
Simultaneous Playback and Recording
1/8x
1/16x
pause
1/16x
1/8x
2) Press [PLAY B] to return to the normal playback.
Note
To playback a title being recorded while continuing to
record, refer to “Chasing Playback during Recording”
above (available only with HDD).
Note
• Video CD, audio CD, MP3/JPEG files recorded on a
disc can also be played back during HDD recording.
Function Setup
Others
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
1/16x:
1/8x:
1/3x:
reverse (approx. speed)
1/16x:
1/8x:
1/4x:
• Only slow forward is available when playing back
video CD.
1/3x
Editing
1/4x
With regard to HDD, you can continue recording a
program while playing back another title.
To do so, press [TITLE] during recording and select a title
you like to play back, and then press [PLAY B].
(You can also start the playback from the title list menu.)
Playback
1) During playback, press [PAUSE F]. Then press
[ D] or [ E].
Every time you press [D] or [E], approximate speed
will be changed as follows. (The sound will remain
muted.)
Español
EN
73
SPECIAL PLAYBACK
Marker Setting
Zoom
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
menu.
e.g.) DVD-video
1/ 5
This feature allows you to assign a specific point on a title
to be called back later.
to display the selection
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
1/ 5
0:01:00 / 1:23:45
DVD Video
2) Use [{ / B] to select
e.g.) DVD-video
to display the marker list.
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select a desired zoom factor to zoom,
then press [OK].
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
× 1.2
× 1.5
× 2.0
3) Use [K / L] to select a desired marker number.
When it reaches the desired point, press [OK].
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
1
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
2
3
4
5
6
-------------
Zoom area will be displayed.
The title (track) number and the time will be displayed.
4) Use [K / L / { / B] to select a desired zoom position,
then press [OK].
4) To return to the marker later:
Use [K / L] to select the desired marker number,
then press [OK].
Note
Zoom playback will start.
Note
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press [RETURN] repeatedly
at step 3.
• To cancel the zoom function, select “x1.0” using
[K / L], then press [OK] at step 3.
• You cannot slide the zoomed picture on some JPEG
files.
74
EN
• To clear a marker, select the marker number to be
cleared, then press [CLEAR].
• All markers will be erased when you operate these
operations listed below.
– opening the disc tray (DVD/CD only)
– turning the unit to the standby mode (DVD/ CD only)
– make additional recording on the disc (DVD only)
– editing any title (DVD only)
– dividing the title (HDD only)
– deleting a scene of the title (HDD only)
• You can mark up to 6 points.
• Marker setting is not available when you play back
the video CD with PBC function.
SPECIAL PLAYBACK
Note
Available repeat function may vary depending the discs.
1) During playback press [DISPLAY], then proceed to
step 2), or press [REPEAT] then proceed to step 3).
• If the display menu is already shown, skip to step 2.
1/ 5
to display the selection
1/ 5
0:01:00 / 1:23:45
DVD Video
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
OFF
Title
Chapter
A–B
0:00:15 / 0:05:00
CD
Track
All
A–B
e.g.) MP3 files
MP3
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the TV
screen.
• For video CD with PBC function, the PBC setting will
be switched to the standby mode automatically
when you start random playback.
OFF
Track
All
Group
e.g.) JPEG files
1/ 5
Playback
Note
0:00:15
0:00:05
Recording
2) Use [K / L] to select “DISC Playback Mode”, then
press [OK].
“DISC Playback Mode” menu will appear.
For MP3, use [K / L] to select “Music”, then press [OK].
For JPEG, use [K / L] to select “Photo”, then press [OK].
3) Use [K / L] to select “Random Play”, then press [OK].
Random playback will start.
OFF
1/ 5
You can play back a disc randomly instead of playing
back in the original order.
1) Press [SETUP].
e.g.) audio CD, video CD
1/ 5
Random Playback
Basic Setup
3) Use [K / L] to select a desired repeat type, then
press [OK].
e.g.) HDD/DVD
Connections
2) Use [{ / B] to select
menu.
• Point B for the repeat A-B playback should be set
within the same title or track as point A.
• To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be canceled when you
stop playback.
• You cannot select “Group” during the random
playback.
• Repeat playback is not available when you play back
the video CD with PBC function.
Introduction
Repeat Playback
JPEG
Track
All
Group
Editing
OFF
Slide Show
The selected repeat playback will start.
1/ 5
1/ 5
0:01:00 / 1:23:45
Repeat
You can select the display time between 5 seconds and
10 seconds.
Title
1) Follow steps 1 and 2 in “Random Playback” on this
page.
2) Use [K / L] to select “Slide Show”, then press [OK].
3) Use [K / L] to select the display time, then press [OK].
4) Press [SETUP] to exit.
Others
Note
• Large-size JPEG files take a few moments to be
displayed.
Español
Title (HDD/DVD only):
The current title will be played back repeatedly.
Chapter (HDD/DVD only):
The current chapter will be played back repeatedly.
All (DVD/audio CD/video CD without PBC function/
CD with MP3, JPEG):
All titles in the media will be played back repeatedly.
A-B (HDD/DVD/audio CD/video CD without PBC
function only):
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [OK].
2) Press [OK] at the desired starting point A.
3) Press [OK] at the desired ending point B.
Track (audio CD/video CD without PBC function/
MP3 or JPEG files only):
The current track or file will be played back repeatedly.
Group (MP3/JPEG files only):
The current folder will be played back repeatedly.
Function Setup
+RW
EN
75
SPECIAL PLAYBACK
Program Playback
Playing Back the Autostart Recording
You can program the disc to play back in your desired
order.
1) Press [SETUP].
2) Use [K / L] to select “DISC Playback Mode”, then
press [OK].
“DISC Playback Mode” menu will appear.
3) Use [K / L] to select “Program Play”, then press
[OK].
4) Use [K / L] to select a desired track, then press [OK]
or [B].
DISC Playback Mode
Program Play
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total
0:00:00
Repeat this step until you program all the desired
tracks.
5) Press [PLAY B].
DISC Playback Mode
Program Play
09
04
10
06
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total
By playing back the autostart recording, you can pause
or go back the TV program you are currently watching.
For the autostart recording refer to “AUTOSTART
RECORDING” on page 46.
To pause and resume the TV program:
1) When watching TV program through this unit’s
tuner, press [PAUSE F].
TV program will be paused and sound will be muted.
2) Press [PLAY B] to resume the TV program you were
watching from where you have paused.
To rewind or fast forward the TV program:
When watching TV program through this unit’s
tuner, press [H], [E], [V.REPLAY], [G], [D] or
[V.SKIP].
• While playing back the autostart recording, pressing
[H] or [G] skips playback point 5 minutes
backward or forward.
To go back to the specific time:
1) When watching a TV program through this unit’s
tuner, press [DISPLAY], then press [OK].
2) Use [K / L / { / B] or [the Number buttons] to enter
a desired time, then press [OK].
• While playing back the autostart recording, press
[STOP C] to cancel the playback.
• When watching TV program or while playing back the
autostart recording, press [DISPLAY] once to display
the autostart recording information. Refer to
“Autostart Recording Information” on page 23.
• Noise reduction, zoom and virtual surround functions
are available while playing back the autostart
recording.
0:31:07
Note
Program playback will start.
Note
• To erase tracks you selected, press [CLEAR] at step 4.
• You can program up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
• Program information will be retained until you turn
the unit to the standby mode or open the disc tray.
• You may also select a desired track using
[the Number buttons] at step 4.
• For video CD with PBC function, the PBC setting will
be switched to the standby mode automatically
when you start program playback.
76
EN
• While playing back the autostart recording, you
cannot change the channels.
• While playing back the autostart recording, you
cannot change the DTV audio language.
• If you change to DVD mode or if the timer recording
starts while playing back the autostart recording, the
playback will be stopped.
• When this unit turns on for the timer recordings, the
autostart recording will not be performed.
• For the contents of the autostart recording, you
cannot change the TV audio.
SEARCH
Introduction
Title / Chapter Search
Track Search
Using [H] / [G]
1) During playback, press [G] to skip the current
title or chapter and move to the next.
The title or chapter will move forward one at a time.
• If there is no chapter in one title, the current title will
be skipped.
1) During playback, press [G] to skip the current
track/file and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file,
press [H].
Press it repeatedly to go to the previous track/file. The
track/file will move backward one at a time.
For JPEG files, press it once to go to the previous file.
Note
• With regard to HDD, chapter search using
[H] / [G] is available only within the same title.
Using [DISPLAY]
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2) Use [{ / B] to select
e.g.) audio CD
1/ 5
, then press [OK].
0:00:15 / 0:05:00
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
e.g.) DVD-video
CD
, then press [OK].
e.g.) MP3 files
1/ 5
0:01:00 / 1:23:45
1/ 5
DVD Video
The number next to
will be highlighted.
0:00:15
MP3
The number next to
will be highlighted.
3) Use [K / L] or [the Number buttons] to enter a
desired track/file number to search, then press
[OK].
After the search, playback will start automatically.
Editing
Note
• During CD playback you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.
• Track search using [DISPLAY] is not available when
you play back the video CD with PBC function.
Note
Function Setup
3) Title:
Use [K / L] or [the Number buttons] to enter a
desired title number to search, then press [OK].
Title search will start.
Chapter:
for
Press [B] to move to the number next to
chapter.
Use [K / L] or [the Number buttons] to enter a
desired chapter number to search, then press [OK].
After the search, playback will start automatically.
Playback
1/ 5
Recording
Using [DISPLAY]
Basic Setup
To go back to the beginning of the current title or
chapter, press [H].
Press it repeatedly to go to the previous title or
chapter. The title or chapter will move backward one
at a time.
Connections
Using [H] / [G]
• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
1/ 5
Others
1/ 5
0:01:00 / 1:23:45
DVD Video
Español
total number
total time
of titles
of the title
total number
of chapters
EN
77
SEARCH
Time Search
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2) Use [{ / B] to select
e.g.) DVD-video
1/ 5
, then press [OK].
1/ 5
0:01:00 / 1:23:45
DVD Video
e.g.) audio CD
1/ 5
0:00:15 / 0:05:00
CD
The number next to
will be highlighted.
To move to the number next to
, press [B].
When time search is not available,
counter are not displayed.
and time
3) Use [K / L / { / B] or [the Number buttons] to enter
a desired time to search, then press [OK].
After the search, playback will start automatically.
Note
• Time search is available only in the same track, file or
title.
• Time search is not available when you play back the
video CD with PBC function.
78
EN
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Subtitles
Switching Audio Soundtrack
When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch them during playback.
When playing back video CD, audio CD you can switch
“L/R”(stereo), “L”(left) or “R”(right).
1) During playback, press [DISPLAY].
1/ 5
to display the selection
1/ 5
0:01:00 / 1:23:45
1) During playback press [DISPLAY], then proceed to
step 2), or press [AUDIO] then proceed to step 3).
• If the display menu is already shown, skip to step 2.
2) Use [{ / B] to select
menu.
to display the selection
DVD Video
1/ 5
1/ 5
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
0:01:00 / 1:23:45
1.Dolby Digital 5.1ch English
2.Dolby Digital 2ch English
DVD Video
Recording
3) Use [K / L] to select a desired subtitle language,
then press [OK].
3) Use [K / L] to select a desired audio soundtrack or
audio channel, then press [OK].
For DVD-video
• Audio soundtrack will switch.
Basic Setup
2) Use [{ / B] to select
menu.
e.g.) DVD-video
Connections
DVD-video may have subtitles in 1 or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages anytime during
playback.
Introduction
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
OFF
1.English
Note
• If the title contains both main and sub audio, you can
further select “L” (main), “R” (sub), or “L/R” (mixed of
main and sub).
For audio CD, video CD
• Audio channel will switch.
e.g.) audio CD
• Some discs will only allow you to change the subtitle
from the disc menu. Press [TITLE] or [DISC MENU] to
display the disc menu.
• If a 4-digit language code appears in the subtitle
menu, refer to “LANGUAGE CODE” on page 119.
1/ 5
Playback
Subtitle will be displayed in the selected language.
When selecting “OFF”, subtitle will disappear.
0:00:15 / 0:05:00
CD
Editing
1. L/R
2. L
3. R
Note
Function Setup
• Some discs will only allow you to change the
soundtrack from the disc menu. Press [TITLE] or
[DISC MENU] to display the disc menu.
Others
Español
EN
79
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Virtual Surround System
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2) Use [{ / B] to select
menu.
e.g.) DVD-video
1/ 5
Switching Camera Angles
Some DVD-videos have scenes shot from 2 or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
e.g.) DVD-video
to display the selection
1/ 5
, then press [OK].
1/ 5
0:01:00 / 1:23:45
DVD Video
1/ 5
0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select “OFF”, “Type 1” or “Type 2”,
then press [OK].
e.g.) DVD-video
1/ 5
1/ 5
Angle icon appears when a switching camera angle is
available.
Angle will switch each time you press [OK].
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
OFF
: no effect
Type 1 : natural effect
Type 2 : emphasized effect
Note
• Angle icon does not appear on the TV screen in a
case you set “Angle Icon” to “OFF” in “Playback”
menu. Refer to page 106.
Reducing Block Noise
Note
• Select “OFF” in a case sound is distorted.
• The setting will be kept even when the unit is turned
off.
This function reduces noise in the playback picture.
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
menu.
e.g.) DVD-video
1/ 5
to display the selection
1/ 5
0:01:00 / 1:23:45
DVD Video
3) Use [K / L] to select a desired option, then press
[OK].
1/ 5
1/ 5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Your setting will be activated.
OFF
: When playing back titles with a few noises
such as DVD-video.
Type 1 : For the titles recorded in long time mode
such as SLP mode.
Type 2 : Same as type 1, only more effective.
80
EN
INFORMATION ON EDITING
Title list allows you to check the titles recorded on the HDD or the disc easily. You can choose a title to play back from
this list and easily edit the titles as you prefer.
Press [HDD], then press [TITLE].
Press [DVD], then press [TITLE].
DVD mode
2 1
7
6
8
Connections
HDD mode
9
Title List
JAN/ 4/10 12:00AM CH10 SP
12:00AM (1:00:00) JAN/ 4/10
1
2
5
1
SP(2Hr)
CH10 SP
NOV/21/10 11:00AM CH12 SP
NOV/21/10 0:20:44
3
Play
Edit
Overwrite
6
2
NOV/22/10 11:35AM CH13 EP
NOV/22/10 0:10:33
Basic Setup
4
3
EMPTY SPACE
1:37:52 SP (2Hr)
1/6
3 4
Introduction
Guide to a Title List
5 4
7
11
10
e.g.) DVD
Recording
Edit
2
itle Delete
dit Title Name
Chapter Mark
Hide Chapter
ndex Picture
itle Dividing
NOV/22/10 11:35AM CH13 EP
Playback
1 : 05 : 00
16 15 14
12
Function Setup
Others
is displayed here.
10. Capacity indicator: Indicating the position and the
amount of each title in the disc. The portion for the
selected title is highlighted.
• It may not indicate the precise capacity of the disc.
• If the duration of a title is too short, it may not be
reflected in the capacity indicator.
11. Index pictures: A cut from the recorded content is
displayed here.
12. Submenu: Submenus for the selected menu are
displayed here.
13. Title name (editable): If you do not name the title,
the recorded date, time, channel, and the recording
mode are displayed here.
14. Progress bar: Indicating the progress of the
playback.
15. Preview window: Preview of the selected title is
displayed here.
16. Playback status: Indicating the current playback
status of the selected title.
Editing
Press [STOP C] to exit the title list.
Español
1. Title name (editable): Recording date, time, channel
and the recording mode will be assigned
automatically as the title name until you edit it.
2. Title information: Time at which the recording of
the title was started, duration of the title, date
recorded, channel recorded, and the recording mode
in which the title was recorded.
3. Title List: List of titles recorded on the HDD. Each
title is indicated by its index picture. Following icons
may be displayed on the index picture.
: Indicating the title has never been played back.
: Indicating the title is protected.
: Indicating the title is a copy-protected title.
I : If you call up the title list while recording, “I”
will be displayed on the index picture of the
title currently being recorded.
4. Arrow: Indicating there is a previous / next page.
5. Title list page number: Current page / total pages.
6. Title list: List of the titles recorded on the disc, and
their information.
7. Arrow: Indicating there is a previous / next page.
8. Title information: On the first line, title name
(editable) is displayed. On the second line, the date
recorded and length of the title are displayed.
EMPTY SPACE: The portion of the disc where there
are no recordings. As for the EMPTY SPACE, available
recording time by the selected recording mode is
displayed on the second line.
9. Recording mode: Currently selected recording mode
13
EN
81
INFORMATION ON EDITING
Edit Menu
Media
Available Features
Putting names on titles
HDD
DVD
✔
✔
Deleting a title
✔
✔
Deleting selected titles
✔
Deleting a scene of a title
✔
Adding / deleting chapter marks
✔
✔
✔
Hiding chapters
Protecting a title
✔
Dividing a title
✔
✔ *1
Setting an index picture
✔
Finalizing a disc
✔
Making edits compatible
✔*
Putting name on disc
✔
Setting or Releasing disc protect
✔
✔ : Available
: Not available
Note
2
• Once you have finalized a DVD+R/ DVD-R, you
cannot edit or record anything on that disc.
• While recording a title to an HDD or a DVD, only
deleting HDD titles is available.
*1 : -RW/+RW discs only
*2 : +RW discs only
How to Access the Edit Menu
HDD
DVD
Press [HDD] first.
1) Press [TITLE].
Press [DVD] first.
1) Press [TITLE].
2) Use [K / L / { / B] to select a desired title, then
press [OK].
2) Use [K / L] to select a desired title, then press [OK].
SP(2Hr)
1
Title List
JAN/ 4/10 12:00AM CH10 SP
12:00AM (1:00:00) JAN/ 4/10
1
NOV/21/10 11:00AM CH12 SP
NOV/21/10 0:20:44
CH10 SP
2
2
3
NOV/22/10 11:35AM CH13 EP
NOV/22/10 0:10:33
3
4
5
6
EMPTY SPACE
1:37:52 SP (2Hr)
1/6
3) Use [K / L] to select “Edit”, then press [OK].
Resume Playback
Play From Start
Edit
Title Delete
Delete Multiple Titles
Dubbing
3) Use [K / L] to select “Edit”, then press [OK].
Play
Edit
Overwrite
SP(2Hr)
1
NOV/21/10 11:00AM CH12 SP
NOV/21/10 0:20:44
2
NOV/22/10 11:35AM CH13 EP
NOV/22/10 0:10:33
3
EMPTY SPACE
1:37:52 SP (2Hr)
Edit
1
Scene Delete
Edit Title Name
Chapter Mark
Title Dividing
Protect
Edit
1
Title Delete
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
JAN/ 4/10 12:00AM CH10 LP
1 : 05 : 00
NOV/21/10 11:00AM CH12 SP
82
EN
1 : 05 : 00
EDITING
Introduction
Deleting a Title
You can delete a title which you do not need anymore.
Please be advised that the title once deleted cannot be
brought back.
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
CHANNEL
1
2
Use [K / L / { / B] to select a desired
title to delete, then press [OK].
If you are editing the titles on HDD, proceed to step 4.
If you are editing the titles on DVD, proceed to step 3.
HDD mode
Title List
SETUP
DISC MENU
Title 1
12:00AM (1:00:00)
HDMI
JAN/ 4/10
CH10 SP
1
2
3
4
5
6
Basic Setup
.@/:
OPEN/
CLOSE
Press [TITLE].
Connections
STANDBY-ON DTV/TV
If you are editing the titles on HDD, press [HDD] first.
If you are editing the titles on DVD, press [DVD] first.
TITLE
Recording
OK
O
1/1
RETURN
DISPLAY
DVD mode
V REPLAY
V.SKIP
1
SP(2Hr)
Playback
NOV/21/10 11:00AM CH12 SP
NOV/21/10 0:20:44
2
NOV/22/10 11:35AM CH13 EP
NOV/22/10 0:10:33
RAPID PLAY
3
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
EMPTY SPACE
1:37:52 SP (2Hr)
Play
Edit
Overwrite
1
SP(2Hr)
NOV/21/10 11:00AM CH12 SP
NOV/21/10 0:20:44
Function Setup
2
NOV/22/10 11:35AM CH13 EP
NOV/22/10 0:10:33
3
EMPTY SPACE
1:37:52 SP (2Hr)
Others
Note
Instructions continue on the next page.
EN
83
Español
• For DVD+RW/DVD-RW, the available disc space will
increase only when the last recorded title in the title
list is deleted. For DVD+R/DVD-R, the disc space will
not be affected.
• Deleted part of the titles in the capacity indicator
changes in color.
• As for DVD+RW/DVD-RW if you delete the title, deleted
title will be displayed as “EMPTY SPACE”.
• For DVD, it may take a while to write the data to the
disc after you press [OK] at step 5.
Editing
3
Use [K / L] to select “Edit”, then press
[OK].
EDITING
4
Use [K / L] to select “Title Delete”,
then press [OK].
HDD mode
Resume Playback
Play From Start
Edit
Title Delete
Delete Multiple Titles
Dubbing
5
Use [K / L] to select “Yes”, then press
[OK].
The title is now deleted.
Title List
Title 2
12:00AM (1:00:00)
DVD mode
JAN/ 4/10
1
2
4
5
CH10 SP
3
Edit
1/1
1
Title Delete
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
1
SP(2Hr)
EMPTY SPACE
0:21:14 SP (2Hr)
2
NOV/22/10 11:35AM CH13 EP
NOV/22/10 0:10:33
NOV/21/10 11:00AM CH12 SP
1 : 05 : 00
Confirmation message will appear.
84
EN
3
EMPTY SPACE
1:37:52 SP (2Hr)
EDITING
STANDBY-ON DTV/TV
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SETUP
SPACE
CLEAR
AUDIO
REPEAT
CHANNEL
Title List
Title 1
12:00AM (1:00:00)
HDMI
JAN/ 4/10
CH10 SP
1
2
3
4
5
6
TITLE
Press ‘CLEAR’ to confirm.
RETURN
DISPLAY
V.SKIP
5
Repeat step 4 until you select all the
titles you want to delete.
Title List
Title 2
12:00AM (1:00:00)
RAPID PLAY
HDD
DVD
TIMER
REC MODE
REC
CH10 SP
2
3
4
5
6
Press ‘CLEAR’ to confirm.
Press [CLEAR].
Confirmation message will appear.
Use [K / L] to select “Yes”, then press
[OK].
Titles are now deleted.
Title List
Title 1
12:00AM (1:00:00)
1
JAN/ 4/10
2
CH10 SP
3
Others
Use [K / L / { / B] to select any title,
then press [OK].
1/1
4
Title List
Title 1
12:00AM (1:00:00)
JAN/ 4/10
Function Setup
Press [HDD], then press [TITLE].
6
7
Editing
D.DUBBING
JAN/ 4/10
1
Playback
V REPLAY
1/1
Trash mark will appear indicating the title is
marked for deletion.
OK
O
1
2
Recording
DISC MENU
4
Use [K / L / { / B] to select the title
you want to delete, then press [OK].
OPEN/
CLOSE
Resume Playback
Play From Start
Edit
Title Delete
Delete Multiple Titles
Dubbing
Basic Setup
.@/:
3
Use [K / L] to select “Delete Multiple
Titles”, then press [OK].
Connections
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back.
Introduction
Deleting Selected Titles
CH10 SP
2
3
4
5
6
1/1
To remove the trash mark from the title:
Select the title with the trash mark, then press
[OK].
Español
1
1/1
EN
85
EDITING
Putting Names on Titles
You can put title names on the titles and change the
names from this menu.
STANDBY-ON DTV/TV
OPEN/
CLOSE
SOURCE
4
Use [K / L] to select “Yes”, then press
[OK].
Edit - Edit Title Name
1
Yes
No
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CHANNEL
MY FAVORITE
1 : 05 : 00
SETUP
SPACE
CLEAR
AUDIO
REPEAT
The title name is now updated.
5
HDMI
DISC MENU
TITLE
Press [RETURN] once or repeatedly to
go back to the title list.
For DVD, the data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
OK
O
RETURN
DISPLAY
Guide to Edit Title Name
V REPLAY
1) Use [K / L] to select a desired character set, then
press [OK].
2) Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
When you finish entering a title name, press [OK].
V.SKIP
RAPID PLAY
Select
1
2
Follow steps in “How to Access the
Edit Menu” on page 82 to display
“Edit” menu.
Press
ABC
abc
123
<space>
<space>
0
<space>
! ”# $ % & ’( )
*+,-./:;<=>
?@[]^_{|}
(*1)
(*1)
1
Use [K / L] to select “Edit Title
Name”, then press [OK].
ABC
abc
2
e.g.) DVD
DEF
def
3
GHI
ghi
4
JKL
jkl
5
MNO
mno
6
PQRS
pqrs
7
TUV
tuv
8
WXYZ
wxyz
9
Edit
1
@!?
Title Delete
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
NOV/21/10 11:00AM CH12 SP
1 : 05 : 00
3
To enter a title name, follow the
steps of “Guide to Edit Title Name”
on this page.
Edit - Edit Title Name
1
A B C
a b c
character set
1 2 3
@ !
?
M
1 : 05 : 00
86
EN
area for entering title names
*1 Press
character set will be changed to “ @!? ”
mode automatically. Press
to
to go back to
the previous character set.
• To delete letters, press [CLEAR] repeatedly.
Holding [CLEAR] will delete all letters.
• Use [s / B] to move the cursor to the left and right.
• You can enter up to 30 letters.
Note
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
or other.
• Press the corresponding number key repeatedly to
choose the available letters.
e.g.) Press [2] three times to choose the letter “C”.
EDITING
Introduction
Chapter Marks (Add)
You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
HDMI
TITLE
RETURN
DISPLAY
V REPLAY
V.SKIP
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
Play back the title up to the point
where you want to set a new chapter
mark.
When it comes to the desired point, press
[PAUSE F].
Use [K / L] to select “Add”, then press
[OK].
e.g.) DVD
Recording
OK
O
1
2
3
4
Follow steps in “How to Access the
Edit Menu” on page 82 to display
“Edit” menu.
Basic Setup
.@/:
OPEN/
CLOSE
Connections
STANDBY-ON DTV/TV
To add a chapter mark:
Edit - Chapter Mark
1
Add
Delete
Playback
Delete All
Chapter
2/ 3
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
NOV/21/10 11:00AM CH12 SP
1 : 05 : 00
Edit - Chapter Mark - Add
1
Editing
5
Use [K / L] to select “Yes”, then press
[OK].
Yes
No
2/ 3
Function Setup
Chapter
F
NOV/21/10 11:00AM CH12 SP
Note for adding or deleting chapter marks
A new chapter mark is now added.
To add more chapter marks, repeat steps 3 to 5.
6
Press [RETURN] once or repeatedly to
go back to the title list.
Others
For DVD, the data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
Español
• Maximum number of chapter marks in a title is 99
(for HDD/DVD) and the maximum number of chapter
marks in total is no limit (for HDD) / 254 (for DVD).
If the number of the chapter marks exceed the limit,
you cannot add any more chapter marks.
• Only with regard to DVD editing, you may not be
able to add chapter marks depending on the
duration of the title or the number of chapters.
• Only with regard to DVD editing, remaining time of
the disc may decrease when adding chapter marks or
increase when clearing chapter marks depending on
the recording time or edited contents.
• When you search for a point at step 3, you can also
use the special playback functions such as [G],
[D] etc.
1 : 05 : 00
EN
87
EDITING
Chapter Marks (Delete)
To delete a chapter mark:
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
HDMI
TITLE
1
2
3
OK
O
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
Use [H] / [G] to go to the chapter
with the chapter mark number you
want to delete, then press [PAUSE F].
Chapter mark number is displayed on the
preview screen.
e.g.) DVD
Edit - Chapter Mark
RETURN
DISPLAY
Follow steps in “How to Access the
Edit Menu” on page 82 to display
“Edit” menu.
1
V REPLAY
Add
Delete
V.SKIP
Delete All
Chapter
RAPID PLAY
2/ 3
NOV/21/10 11:00AM CH12 SP
1 : 05 : 00
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
4
5
Use [K / L] to select “Delete”, then
press [OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit - Chapter Mark - Delete
1
Yes
No
Chapter
1/ 2
F
NOV/21/10 11:00AM CH12 SP
1 : 05 : 00
The selected chapter mark is now deleted.
To delete more chapter marks, repeat steps 3 to
5.
6
Note
• You cannot delete the first chapter mark.
88
EN
Press [RETURN] once or repeatedly to
go back to the title list.
For DVD, the data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
EDITING
Introduction
Chapter Marks (Delete All)
To delete all chapter marks:
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
HDMI
TITLE
RETURN
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
Use [K / L] to select “Delete All”, then
press [OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit - Chapter Mark - Delete All
1
Yes
No
V REPLAY
V.SKIP
Chapter
Recording
OK
O
DISPLAY
1
2
3
4
Follow steps in “How to Access the
Edit Menu” on page 82 to display
“Edit” menu.
Basic Setup
.@/:
OPEN/
CLOSE
Connections
STANDBY-ON DTV/TV
2/ 3
F
Playback
NOV/21/10 11:00AM CH12 SP
1 : 05 : 00
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
All chapter marks are now deleted.
Edit - Chapter Mark
1
Add
Delete
Editing
Delete All
Chapter
1/ 1
NOV/21/10 11:00AM CH12 SP
1 : 05 : 00
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Function Setup
5
Press [RETURN] once or repeatedly to
go back to the title list.
Others
Español
EN
89
EDITING
Dividing a Title
You can divide one title into 2 new titles.
SOURCE
STANDBY-ON DTV/TV
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
HDMI
TITLE
OK
O
RETURN
DISPLAY
V REPLAY
V.SKIP
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Note
• If an internal HDD or a DVD contains the maximum
number of titles (HDD: 600, DVD+RW/-RW: 49), you
cannot divide any titles.
• With DVD+RW/-RW, you cannot divide the titles if the
total number of chapters has already reached 254.
• When you search for a point at step 2, you can also
use the special playback functions such as [G],
[D] etc.
• For DVD, it may start writing data to the disc as you
complete the editing procedure.
90
EN
1
2
3
4
Follow steps in “How to Access the
Edit Menu” on page 82 to display
“Edit” menu.
Play back the title up to the point
where you want to divide the title.
When it comes to the desired point, press
[PAUSE F].
Use [K / L] to select “Title Dividing”,
then press [OK].
Use [K / L] to select “Yes”, then press
[OK].
The title is now divided into 2 new titles, and it
will go back to the title list automatically. Title
name of the divided titles are identical, and
index pictures are reset to the first scene at this
point.
EDITING
Introduction
Deleting a Scene of a Title
You can delete a specific part of a title.
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
Use [K / L] to select “Scene Delete”,
then press [OK].
Edit
1
CHANNEL
Scene Delete
Edit Title Name
Chapter Mark
Title Dividing
Protect
Basic Setup
.@/:
OPEN/
CLOSE
Connections
SOURCE
STANDBY-ON DTV/TV
1
2
Follow steps in “How to Access the
Edit Menu” on page 82 to display
“Edit” menu.
JAN/ 4/10 12:00AM CH10 LP
1 : 05 : 00
SETUP
DISC MENU
HDMI
TITLE
3
RETURN
DISPLAY
Recording
OK
O
Play back the title up to the point
where you want to set a start point
for the scene to be deleted, then
press [OK].
Edit - Scene Delete
V REPLAY
V.SKIP
1
Playback
Start
End
Preview
Delete
RAPID PLAY
JAN/ 4/10 12:00AM CH10 LP
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
1 : 20 : 00
Start point is now set, and the highlight
automatically moves to “End”.
Edit - Scene Delete
1
Start
End
Preview
Delete
1 : 30 : 00
End point is now set, and the highlight
automatically moves to “Preview”.
The portion for deletion is indicated in red in the
progress bar at the bottom of the screen.
• When you search for the start/end point at step 3/4,
you can also use the special playback functions such
as [G], [D] etc.
Instructions continue on the next page.
EN
91
Español
Note
Others
JAN/ 4/10 12:00AM CH10 LP
Function Setup
The end of a title, playback will be in pause
mode. Press [PLAY B] to resume playback from
the beginning of the title.
Editing
4
Play back the title up to the point
where you want to set an end point,
then press [OK].
EDITING
5
With “Preview” highlighted, press
[OK] to preview the result.
Before and after 5 seconds of the deleted scene
can be previewed every time you press [OK].
• If you are not satisfied with the result, use
[K / L] to go back to “Start” or “End”, and try
setting them again.
• If you are satisfied with the result, proceed to
step 6.
7
Use [K / L] to select “Yes” then press
[OK].
Edit - Scene Delete
1
Yes
No
JAN/ 4/10 12:00AM CH10 LP
1 : 30 : 00
start point end point
The selected scene is now deleted.
Before
editing
8
Edited
6
Use [K / L] to select “Delete” then
press [OK].
Edit - Scene Delete
1
Start
End
Preview
Delete
JAN/ 4/10 12:00AM CH10 LP
1 : 30 : 00
92
EN
Press [RETURN] once or repeatedly to
go back to the title list.
EDITING
Introduction
Protecting a Title
To prevent the accidental editing, or erasing of the titles,
you can protect them in “Edit” menu.
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
Use [K / L] to select “Protect”, then
press [OK].
Edit
1
CHANNEL
Scene Delete
Edit Title Name
Chapter Mark
Title Dividing
Protect
Basic Setup
.@/:
OPEN/
CLOSE
Connections
STANDBY-ON DTV/TV
1
2
Follow steps in “How to Access the
Edit Menu” on page 82 to display
“Edit” menu.
JAN/ 1/10 12:00AM CH10 LP
1 : 30 : 00
SETUP
TITLE
OK
O
3
V REPLAY
ON” selected, press
Edit - Protect
1
RETURN
DISPLAY
With “OFF
[OK].
Recording
DISC MENU
HDMI
OFF
ON
V.SKIP
1 : 30 : 00
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Press [RETURN] once or repeatedly to
go back to the title list.
Function Setup
4
Editing
The title is now protected.
• If the title is already protected, “ON OFF” will
appear instead. Press [OK], to release the title
from protection.
• The protected title will be marked with
icon.
Playback
JAN/ 1/10 12:00AM CH10 LP
Others
Español
EN
93
EDITING
Hiding Chapters
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
HDMI
TITLE
1
2
3
4
Follow steps in “How to Access the
Edit Menu” on page 82 to display
“Edit” menu.
Use [K / L] to select “Hide Chapter”,
then press [OK].
Submenu will appear.
Use [H] / [G] to go to the chapter
you want to hide, then press
[PAUSE F].
Use [K / L] to select “Hidden”, then
press [OK].
Edit - Hide Chapter
1
Visible
Hidden
Chapter
2/ 3
Visible
OK
O
RETURN
DISPLAY
NOV/21/10 11:00AM CH12 SP
V REPLAY
1 : 05 : 00
V.SKIP
The chapter is now hidden.
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
5
Press [RETURN] once or repeatedly to
go back to the title list.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K / L] to select “Visible” at step 4 on this
page.
Data will be written onto the disc momentarily.
After that, the title list is displayed.
Note
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed on an index picture of the title
list.
1
Hidden
SP(2Hr)
NOV/21/10 11:00AM CH12 SP
NOV/21/10 0:20:44
2
NOV/22/10 11:35AM CH13 EP
NOV/22/10 0:10:33
3
EMPTY SPACE
1:37:52 SP (2Hr)
94
EN
EDITING
Introduction
Setting an Index Picture
You can set your desired scene as an index picture for
each title.
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
HDMI
TITLE
Play back the title to find the scene
you want to use as an index picture.
When it comes to the desired point,
press [PAUSE F].
Use [K / L] to select “Index Picture”,
then press [OK].
Use [K / L] to select “Yes”, then press
[OK].
Recording
Edit - Index Picture
1
OK
O
Yes
No
RETURN
DISPLAY
V REPLAY
Basic Setup
.@/:
OPEN/
CLOSE
Connections
SOURCE
STANDBY-ON DTV/TV
1
2
3
4
Follow steps in “How to Access the
Edit Menu” on page 82 to display
“Edit” menu.
F
V.SKIP
NOV/21/10 11:00AM CH12 SP
Playback
1 : 05 : 00
A new index picture is now set.
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Data will be written onto the disc momentarily.
Editing
5
Press [RETURN] once or repeatedly to
go back to the title list.
This operation may take a
while to be completed.
Function Setup
Others
Note
Español
• If the selected picture for an index picture is
overwritten, the index picture is reset to the first
scene of the title.
• When you search for the point at step 2, you can also
use the special playback functions such as [G],
[D] etc.
EN
95
EDITING
Putting Name on Disc
Press [STOP C] if you are playing back a disc.
You can put a name on the disc and change it from this
menu.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
1
2
3
HDMI
Press [SETUP].
Use [K / L] to select “Disc Edit”, then
press [OK].
Use [K / L] to select “Edit Disc Name”,
then press [OK].
e.g.) DVD+RW
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
TITLE
A window for entering a title name will appear.
Edit Disc Name
OK
O
A B C
RETURN
DISPLAY
a b c
No Disc Name
1 2 3
V REPLAY
V.SKIP
Disc
DVD+RW
Total T tles
3
Disc Space Used
0 30 48
Disc Protect
OFF
Make Ed ts Compa ible
Needed
@ !
?
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
4
5
To enter a disc name, follow the steps
of “Guide to Edit Title Name” on page
86.
When you finish entering a title name, press
[OK].
Use [K / L] to select “Yes”, then press
[OK].
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
The disc name is now updated.
Note
• You cannot select “Disc Edit” when finalized DVD+R
or DVD-R is inserted.
96
EN
EDITING
Introduction
Erasing Disc
Press [STOP C] if you are playing back a disc.
You can erase all titles on a disc.
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
HDMI
1
2
3
Use [K / L] to select “Disc Edit”, then
press [OK].
Basic Setup
.@/:
OPEN/
CLOSE
Use [K / L] to select “Erase Disc”,
then press [OK].
e.g.) DVD+RW
Disc Edit
Recording
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
TITLE
OK
O
RETURN
DISPLAY
V REPLAY
Connections
SOURCE
STANDBY-ON DTV/TV
Press [SETUP].
V.SKIP
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
When you press “Yes”, all the
contents in the disc will be erased.
Are you sure to erase the disc?
Playback
4
RAPID PLAY
Use [K / L] to select “Yes”, then press
[OK].
Yes
No
This operation may take a
while to be completed.
Editing
Data will be written onto the disc momentarily.
The contents of the disc is now deleted.
Function Setup
Note
• When you select “Yes” at step 4, all contents of the
disc will be erased.
Others
Español
EN
97
EDITING
Making Edits Compatible
If you have added or deleted chapters, or made chapters
hidden, you must perform “Make Edits Compatible” to
see those effects on other unit.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
Press [STOP C] if you are playing back a disc.
1
2
3
Press [SETUP].
4
Use [K / L] to select “Yes”, then press
[OK].
HDMI
Use [K / L] to select “Disc Edit”, then
press [OK].
Use [K / L] to select “Make Edits
Compatible”, then press [OK].
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
TITLE
OK
O
RETURN
DISPLAY
V REPLAY
V.SKIP
Activate the Make Edits Compatible?
Yes
No
RAPID PLAY
Data will be written onto the disc momentarily.
98
EN
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
This operation may take a
while to be completed.
EDITING
Introduction
Deleting All Titles in HDD
Press [STOP C] if you are playing back a disc.
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
HDMI
1
2
3
TITLE
Press [SETUP].
Use [K / L] to select “HDD Menu”,
then press [OK].
Use [K / L] to select the desired type
of deletion, then press [OK].
Select “Delete All Unprotected Titles” if you want
to delete only the unprotected titles.
Select “Delete All Titles” if you want to delete all
titles including the ones protected.
Recording
HDD Menu
OK
O
Delete All Unprotected Titles
Delete All Titles
RETURN
DISPLAY
V REPLAY
Basic Setup
.@/:
OPEN/
CLOSE
Connections
STANDBY-ON DTV/TV
V.SKIP
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
4
Use [K / L] to select “Yes”, then press
[OK].
Playback
RAPID PLAY
Delete entire titles?
Editing
Yes
No
Titles are now deleted.
Function Setup
Others
Español
EN
99
LIST OF SETTINGS
The following table is the contents which you can set and the default setting.
Refer to the following table for useful operation.
Setup
Playback
Pages 103-106
Items (highlight is the default)
Parental Lock
Disc Audio
Dynamic Range
Control
PCM
Dolby Digital
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
General Setting
Variable Skip / Replay
Display
Pages 107-109
Language
Français
Español
OFF
1 minute
5 minutes
10 minutes
15 minutes
Auto
Bright
Dark
Screen Saver
FL Dimmer
DTV CC
Caption Service
page 38
Recording
page 43
CC Style
User Setting
pages 39-40
Font Size
100 EN
Contents
Set the parental level for DVD playback.
OFF
level 8 [Adult] to 1 [Kid Safe]
Compressing the range of sound volume.
ON
OFF
Set whether the sound recorded in 96kHz will
48kHz
be down sampled in 48kHz.
96kHz
PCM
Set the type of sound signal which outputs
from the digital audio output jack.
Stream
Set the language for disc menu language.
English
French
Spanish
Other
Set the language for audio.
Original
English
French
Spanish
Other
Set the language for subtitles.
OFF
English
French
Spanish
Other
Set whether or not to display the angle icon.
ON
OFF
Set the type of still image in pausing playback.
Auto
Field
Frame
Variable Skip
Set the amount of skip time when you press
[V.SKIP].
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
Set the amount of rewind time when you
Variable Replay
press [V.REPLAY].
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
Set the language for OSD (on-screen display).
English
Set the idling time before the screen saver
starts.
Set the brightness of the front panel display.
OFF
Service1
Service2
Service3
Service4
Service5
Service6
ON
OFF
Set the type of the DTV closed caption.
ON
OFF
Set the CC style setting whether or not is in
effect.
Large
Middle
Small
Set font size of the displayed caption.
Set whether to record the DTV closed caption
or not.
LIST OF SETTINGS
Items (highlight is the default)
CC Style
Font Style
pages 39-40
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Set the font color of the displayed caption.
Edge Type
None
Raised
Depressed
Uniform
L.Shadow
R.Shadow
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Set edge type of the displayed caption.
Back Opacity
Set back opacity of the displayed caption.
Set back color of the displayed caption.
Editing
Set the viewing limitation according to US
movie ratings.
Set the viewing limitation according to US TV
program ratings.
EN 101
Español
Set the viewing limitation according to
Canadian French language ratings.
Others
Set the viewing limitation according to
Canadian English language ratings.
Function Setup
Solid
Transparent
Translucent
Flash
Back Color
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
MPAA Rating
X
NC-17
R
PG-13
PG
G
NR
TV Rating
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
None
Canadian
18+
English Rating
14+
PG
G
C8+
C
E
Canadian French 18ans+
Rating
16ans+
13ans+
8ans+
G
E
Set edge color of the displayed caption.
Playback
Font Color
Recording
Set the font opacity of the displayed caption.
Basic Setup
Solid
Transparent
Translucent
Flash
Connections
General Setting
Contents
Set font style of the displayed caption.
Font Opacity
Edge Color
V-Chip
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Introduction
Setup
Display
Pages 107-109
LIST OF SETTINGS
Setup
Display
Pages 107-109
Items (highlight is the default)
V-Chip
Downloadable
Rating
Block Setting
Clear Downloadable
Rating
Clear the downloadable rating information
and its setting.
Change the password.
Progressive Scan
ON
OFF
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
Video In
S-Video In
Video In
S-Video In
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
ON
OFF
To set the progressive scan mode (set to "ON")
or the interlace scan mode(set to "OFF").
Set a picture size according to aspect ratio of
your TV.
Change
Password
Video
Pages 110-111
Video Input
Page 54
L1(Rear)
L2(Front)
Recording
Auto Chapter
Page 43
Auto Finalize
Page 64
General Setting
Contents
To set the rating.
Disc Full
Set the video input type for the external input.
Insert chapter marks at a preset time interval.
Set the unit to finalize the disc automatically.
End of Timer Rec ON
OFF
Clock
Pages 32-34
Make Recording Compatible
Page 43
Clock Setting
Auto Clock Setting
Daylight Saving Time
Channel
Pages 29-31
Auto Channel Preset
Manual Channel Preset
TV Audio Select
Page 37
HDMI
Page 112
OFF
Auto
Manual
ON(MAR-NOV)
ON(APR-OCT)
OFF
Antenna
Cable (Analog)
Cable (Analog / Digital)
Stereo
SAP
Set the clock for the daylight saving time.
Tune the channels automatically.
Tune the channels manually.
Set the analog TV audio type for output and
recording.
RGB
YCbCr
Set the color space for the HDMI output.
HDMI Audio
ON
OFF
Set to output the HDMI audio signal.
RGB Range
Normal
Enhanced
ON
OFF
Yes
No
Set the black-white contrast level for HDMI
RGB output.
Page 113
Note
• Your change to each setting stays on even when the power is off.
• An item which is not currently available is grayed in the settings.
102 EN
Set to prohibit additional recording (OFF) or
to replace the title list after recording (ON).
Set the clock.
Set the clock automatically.
Format
HDMI Control
Reset All
ON
OFF
Set to utilize the HDMI control.
To set the default setting.
SETUPS
Press [STOP C] if you are playing back a disc.
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
SETUP
AUDIO
REPEAT
DISC MENU
CHANNEL
1
2
3
Use [K / L] to select a desired item,
then press [OK].
1
2
3
4
5
6
7
8
Playback
ABC
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Playback”, then
press [OK].
Basic Setup
.@/:
OPEN/
CLOSE
Recording
SOURCE
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
HDMI
TITLE
OK
O
RETURN
DISPLAY
V REPLAY
V.SKIP
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Connections
STANDBY-ON DTV/TV
Introduction
Playback
Parental Lock
Disc Audio
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Variable Skip / Replay
Submenu will appear.
Function Setup
When you finish with the setting,
press [SETUP] to exit.
Editing
4
5
Refer to 1 to 8 on pages 104-106
and set the selected item.
Others
Español
EN 103
SETUPS
Playback (cont’d)
1
Parental Lock (Default: OFF)
(DVD only)
Some DVD-videos feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
Use [K / L] to select the desired level, then press [OK].
Parental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
If a password has not been set yet, proceed to A .
If a password has been set already, proceed to B .
Note
• Parental lock function may not be available to some
discs.
• With some DVDs, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
• Record the password in case you forget it.
• If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.
104 EN
A
A password has not been set yet.
Use [K / L] to select “Yes”. Use [the Number buttons]
to enter a new password except for 4737, then press
[OK].
Change Password?
Yes
No
Password Input
Yes
Your setting will be activated.
B
A password has been set already.
• Use [the Number buttons] to enter the current
password.
Password Input
Your setting will be activated.
• If you want to change password, use [K / L] to select
“Yes”. Use [the Number buttons] to enter a new
password except for 4737, then press [OK].
<change the password>
Change Password?
Yes
No
Password Input
Yes
Your setting will be activated.
Note
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4737 using
[the Number buttons] in password input window.
Password will be cleared and parental levels will be
set to “OFF”.
SETUPS
2
C
Disc Audio
Use [K / L] to select a setting, then press [OK].
Dolby Digital
PCM
Stream
Use [K / L] to select desired item, then press [OK].
Disc Audio
A
B
C
Dynamic Range Control (Default : ON) (DVD only)
Set to “ON” to compress the range between soft and loud
sounds.
Use [K / L] to select a setting, then press [OK].
Dynamic Range Control
Your setting will be activated.
Note
• Dynamic range control function is available only with
the titles which are recorded in the Dolby Digital
format.
Set the disc menu language.
Use [K / L] to select a setting, then press [OK].
Disc Menu Language
English
French
Spanish
Other
PCM (Default : 48kHz)
Use [K / L] to select a setting, then press [OK].
PCM
48kHz
96kHz
When playing back a disc with copyright protection
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
4
Audio Language (Default : Original) (DVD only)
Set the audio language.
Use [K / L] to select a setting, then press [OK].
Audio Language
Original
English
French
Spanish
Other
Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.
Function Setup
Note
Your setting will be activated.
Editing
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
Disc Menu Language (Default : English) (DVD only)
Playback
B
3
Recording
ON
OFF
• With regard to DVD playback, if the audio source is in
Dolby Digital format, set “Dolby Digital” to “PCM” so that
you can switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your
amplifier / decoder.
Basic Setup
A
Dynamic Range Control
PCM
Dolby Digital
Your setting will be activated.
PCM
: Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
Connections
Choose the appropriate audio setting for your external
device.
It will only affect disc playback.
Dolby Digital (Default : Stream)
Introduction
Playback (cont’d)
Others
Español
EN 105
SETUPS
Playback (cont’d)
5
Subtitle Language (Default : OFF)
(DVD only)
Set the subtitle language.
Use [K / L] to select a setting, then press [OK].
7
Still Mode (Default : Auto)
Select “Auto” usually.
Use [K / L] to select a setting, then press [OK].
Still Mode
Subtitle Language
Auto
Field
Frame
OFF
English
French
Spanish
Other
Your setting will be activated.
If “Other” is selected for 3 to
using [the Number buttons].
5 , press 4-digit code
-
-
Your setting will be activated.
Auto
: Optimum resolution setting (“Field” or
“Frame”) will be selected.
Field
: Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
Note
Code Input
-
(DVD only)
• Frame is 1 completed video image made up of 2
fields (There are 30 frames per second of NTSC video).
-
• When you finish entering the code, press [OK]. Refer
to the language code table on page 119.
Note
• Only the languages supported by the disc can be
selected.
• Audio language setting may not be available to
some discs.
• You can change or switch off the subtitles on a DVD
also from the disc menu if it is available.
• Press [CLEAR] or [s] to erase numbers entered
incorrectly.
8
Variable Skip / Replay
Assign [V.SKIP] or [V.REPLAY] to skip or rewind by a
certain amount of time when they are pressed.
Use [K / L] to select a desired item, then press [OK].
A
B
Variable Skip
Variable Replay
Refer to the explanations below and set the selected item.
A
Variable Skip (Default: 30 seconds)
Sets the amount of skip time for [V.SKIP].
6
Angle Icon (Default : ON)
Variable Skip
(DVD only)
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
Set to “ON” to show the angle icon during the playback.
Use [K / L] to select a setting, then press [OK].
Angle Icon
ON
OFF
Your setting will be activated.
B
Variable Replay (Default: 30 seconds)
Sets the amount of rewind time for [V.REPLAY].
Variable Replay
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
106 EN
SETUPS
Press [STOP C] if you are playing back a disc.
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
HDMI
TITLE
1
2
3
Use [K / L] to select “Display”, then
press [OK].
Use [K / L] to select a desired item,
then press [OK].
1
2
3
4
5
6
Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
RETURN
DISPLAY
Selection menu will appear.
V REPLAY
V.SKIP
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
4
5
1
When you finish with the setting,
press [SETUP] to exit.
Playback
RAPID PLAY
Refer to 1 to 6 on pages 107-109
and set the selected item.
• For 4 and 5 refer to pages 38-40.
Recording
OK
O
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
Basic Setup
.@/:
OPEN/
CLOSE
Connections
STANDBY-ON DTV/TV
Introduction
Display
Language (Default : English)
Editing
Set the language for the on-screen display.
Use [K / L] to select a setting, then press [OK].
Language
Your setting will be activated.
2
Screen Saver (Default : 10 minutes)
Set the time to activate the screen saver function on the
TV screen.
Use [K / L] to select a setting, then press [OK].
Others
Screen Saver
Function Setup
English
Français
Español
OFF
1 minute
5 minutes
10 minutes
15 minutes
Your setting will be activated.
Español
EN 107
SETUPS
Display (cont’d)
3
FL Dimmer (Default: Bright)
Set the front panel display brightness.
Use [K / L] to select a setting, then press [OK].
FL Dimmer
Auto
Bright
Dark
You can choose one from “Auto”, “Bright” and “Dark”.
If “Auto” is selected, the display gets dark when the
power is in the standby mode.
6
V-Chip
With the V-chip system in this unit, you can set the
viewing limitation for the analog/digital TV programs
received from the tuner or recorded on DVDs to prevent
your children from watching inappropriate programs. If
the unit detects a blocked program, a restriction message
appears and you are not allowed to view or record the
program.
1) Use [the Number buttons] to enter the access
password.
If you have not set the password, first, use
[the Number buttons] to set the access password,
then press [OK]. The number you entered will be stored
as the access password.
Password Input
2) Use [K / L] to select a desired item, then press [OK].
V-Chip
A
B
C
D
E
F
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
Downloadable Rating
Change Password
A
B
C
D
MPAA Rating
TV Rating
Canadian English Rating
Canadian French Rating
You can set the viewing limitation according to MPAA
rating (US movie ratings), TV Rating (US TV program
ratings), Canadian English Rating (Canadian English
language Ratings), Canadian French Rating (Canadian
French language Ratings).
1) Use [K / L] to select the desired rating, then press
[OK] repeatedly to switch between view and block.
When it is blocked a key icon will appear.
e.g.) MPAA rating
MPAA Rating
X
NC-17
R
PG-13
PG
G
NR
[MPAA Rating]
Rating
Category
X
Mature audience only
NC-17
No one under 17 admitted
R
Restricted; under 17 requires
accompanying parent or adult guardian
PG-13
Unsuitable for children under 13
PG
Parental guidance suggested
G
General audience
NR
No rating
higher
lower
[TV Rating]
Rating
Category
TV-MA
Mature audience only
TV-14
Unsuitable for children under 14
TV-PG
Parental guidance suggested
TV-G
General audience
TV-Y7
Appropriate for all children 7 and older
TV-Y
Appropriate for all children
None
No rating
higher
lower
[Canadian English Rating]
Rating
108 EN
Category
18+
Adult audience only
14+
Unsuitable for ages under 14
PG
Parental guidance suggested
G
General audience
C8+
For children over 8
C
For all children
E
Exempt program
higher
lower
SETUPS
Introduction
Display (cont’d)
[Canadian French Rating]
Rating
18ans+
E
Category
Adult audience only
higher
Unsuitable for ages under 16
Unsuitable for ages under 13
8ans+
Unsuitable for ages under 8
G
General audience
E
Exempt program
lower
TV Rating
V
S L
D
TV-MA
TV-PG
TV-G
TV-Y7
TV-Y
None
Category
Rating
FV
Fantasy Violence
TV-Y7
V
Violence
S
Sexual Situation
L
Coarse Language
TV-PG
TV-14
TV-MA
D
Suggestive Dialogue
TV-PG, TV-14
• Changing the main rating to block or view
automatically changes all its sub ratings to the same
(block or view).
To set the rating:
Use [K / L] to select “Block Setting” then press [OK] to
show the various types of ratings. Use [K / L] to select a
desired rating to set, then press [OK] to show the levels
for the rating. Use [K / L] to select a level, then press
[OK] to switch between view or block. If you set one level
to block, a key icon will appear and all the higher levels
will be blocked automatically.
To clear the downloadable rating information and its
setting:
Use [K / L] to select “Clear Downloadable Rating”, then
press [OK].
F
Change Password
Change the current password.
Use [the Number Buttons] to enter new access
password.
Note
• When you forget the access password at step 1),
enter 4737 using [the Number buttons] in the
password input window. Password will be cleared.
• Depending on the type of rating system, you may set
the levels individually.
Editing
Note
“Downloadable Rating” after you have cleared the
downloadable rating information, and the new information has
not been downloaded since.
Playback
Sub Rating
• This message will also appear when you try to access
Recording
TV-14
Downloadable Rating is currently not available.
Basic Setup
As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you
can further set the sub ratings to block specific
elements of programming. Press [K / L/ { / B] to select
the desired rating or sub rating, then press [OK]
repeatedly to switch between view and block. Sub
rating status will appear on the side of the main rating.
FV
Set the rating system via digital broadcasting, or clear the
downloaded ratings.
If the broadcasting signal does not have the
downloadable rating information, the message below
will appear.
Connections
16ans+
13ans+
Downloadable Rating
Function Setup
Others
Español
EN 109
SETUPS
Video
Press [STOP C] if you are playing back a disc.
STANDBY-ON DTV/TV
SOURCE
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
OPEN/
CLOSE
CHANNEL
HDMI
TITLE
1
2
3
Use [K / L] to select “Video”, then
press [OK].
Use [K / L] to select a desired item,
then press [OK].
1 Progressive Scan
2 TV Aspect
3 Video Input
Submenu will appear.
OK
O
RETURN
DISPLAY
V REPLAY
V.SKIP
RAPID PLAY
110 EN
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
4
5
Refer to 1 to 2 on page 111 and set
the selected item.
• For 3 refer to page 54.
When you finish with setting, press
[SETUP] to exit.
SETUPS
1
Progressive Scan (Default : OFF)
1) Use [K / L] to select “ON“, then press [OK].
Progressive Scan
TV Aspect
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
Recording
NOTE :
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
Basic Setup
2) Use [{ / B] to select “Yes“, then press [OK].
Yes
Use this feature to adjust the aspect ratio of the video
source which is different from your TV’s ratio to fit your TV
monitor without distorting the picture.
Use [K / L] to select a setting, then press [OK].
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
ON
OFF
Activate?
TV Aspect (Default: 4:3 Letter Box)
Connections
This unit is compatible with the progressive scan system.
The feature provides you with higher definition images
than the traditional output system does. To utilize this
feature, you must set progressive scan mode to “ON”.
2
Introduction
Video (cont’d)
No
3) Use [K / L] to select “Yes“ within 15 seconds, then
press [OK].
Your setting will be activated.
Playback
Note
Editing
• If your TV is compatible with progressive scan (480p),
you are recommended to use the HDMI or
component video cable (commercially available) to
connect this unit to the TV. (Refer to pages 17-18.) If
not, use the RCA video cable and set the progressive
scan to “OFF” or press and hold [SETUP] for more
than 3 seconds during HDD / DVD playback.
• When selecting “No” or not pressing any buttons on the
unit or remote control within 15 seconds at step 3),
progressive scan remains to be “OFF” (interlace scan).
Function Setup
Others
Español
EN 111
SETUPS
HDMI
STANDBY-ON DTV/TV
SOURCE
OPEN/
CLOSE
Use [K / L] to select a setting, then press [OK].
• When the connected device is not compatible with the Y/
Cb/Cr, HDMI signal is output as RGB regardless of the setting.
Format
.@/:
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
RGB
YCbCr
CHANNEL
Your setting will be activated.
2
HDMI
TITLE
HDMI Audio (Default : ON)
If you do not want to output the audio through HDMI
(Such as when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUTPUT jack to your audio
system, etc.), you can set the HDMI audio output off.
Use [K / L] to select a setting, then press [OK].
• Set to “OFF” when the HDMI sound is not output.
HDMI Audio
ON
OFF
OK
RETURN
DISPLAY
V.REPLAY
Your setting will be activated.
3
V.SKIP
RGB Range (Default : Normal)
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [OK].
• Select “Enhanced“ if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
RAPID PLAY
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
RGB Range
1
2
Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
then press [OK].
3
Use [K / L] to select a desired item,
then press [OK].
4
When you finish with the setting,
press [SETUP] to exit.
1
Normal
Enhanced
Your setting will be activated.
4
HDMI Control (Default : OFF)
HDMI Control
Use [K / L] to select “HDMI”, then
press [OK].
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
1
2
3
4
Format
HDMI Audio
RGB Range
HDMI Control
Format (Default : RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
112 EN
ON
OFF
HDMI control allows integrated system control over HDMI
and is part of the HDMI standard.
When “HDMI Control” setting is set to “ON”, functions
listed below will be available.
One Touch Play
When this unit is turned on, the TV also is turned on
and the appropriate external input channel will be
selected automatically. The appropriate external input
channel can also be selected on your TV automatically,
when you press [PLAY B], [G], [H], [DISC MENU],
[TIMER], [DTV/TV], [SETUP], [CHANNEL / ],
[the Number buttons] or [D. DUBBING] when the
unit’s power is on.
Standby
When you press and hold [STANDBY-ON y] for 2
seconds, it turns off the power to the standby mode of
the TV first and then turns the power of this unit also.
System Information
Get & Set Menu Language
This unit recognizes the language set for the TV and
automatically sets the same language as the player
menu language for this unit.
SETUPS
Reset the setting to default.
SOURCE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
SPACE
CLEAR
AUDIO
REPEAT
SETUP
DISC MENU
CHANNEL
HDMI
1
2
3
RETURN
V REPLAY
V.SKIP
Select “Yes” using [K / L] , then press
[OK].
Reset to factory default?
4
Select “Yes” again using [K / L] , then
press [OK].
Are you sure?
Recording
OK
O
Use [K / L] to select “Reset All”, then
press [OK].
Yes
No
TITLE
DISPLAY
“General Setting” menu will appear.
Basic Setup
.@/:
OPEN/
CLOSE
Connections
STANDBY-ON DTV/TV
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
Introduction
Reset All
Yes
No
D.DUBBING
HDD
DVD
TIMER
REC MODE
REC
Playback
Your setting in recording will be initialized.
RAPID PLAY
Editing
Function Setup
Others
Note
Español
• The settings listed below will remain unchanged
even after resetting to the factory default.
– Language setting
– Channel setting
– Clock setting
– Parental lock setting
– V-chip setting
– Timer programming information
EN 113
TROUBLESHOOTING
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
POWER
Symptom
The power does not turn on.
The unit turns on automatically
without any operation.
”Language” menu appears every time
the power turns on.
Remedy
• Check that the AC power cord is connected securely.
• Batteries of the remote control are weak.
• The unit turns on automatically 2 seconds before the timer recording.
• The unit may not have been turned off correctly. Finish up the language setting
procedure by selecting a language in ”Language” menu. Press [OK] to activate the
setting, then press [STANDBY-ON ] to turn the unit to the standby mode.
Do not disconnect the AC power cord before placing the unit in the standby mode.
GENERAL
The unit does not function.
• “ ” or error message appears if the operation is prohibited.
• Batteries of the remote control are weak or exhausted.
No picture, sound or menu appears on • Check if the connections are made securely and correctly.
the screen.
• Check if the cables are damaged.
• Check if a correct external input channel is selected on your TV. (Refer to page 22.)
• Check if you have completed the channel setting. (Refer to pages 29-31.)
• While the setup menu or timer programming display is shown, or while the
screen saver is active, the audio is muted.
Clock setting and channel setting
• If a recording is in progress, these operations cannot be performed.
cannot be performed.
Time jumps/Auto Clock set’s incorrect • Set the “Auto Clock Setting” to “OFF” on page 102 and try “Manual
time.
Clock Setting” on page 34.
The unit does not operate properly.
• Moisture has condensed inside the unit. Remove the disc and leave the unit
turned on for about 2 hours until the moisture evaporates. (Refer to page 3.)
“Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
Repairing
It may take several minutes up to about several hours.
In case you intend to cancel the
• If you intend to cancel the repairing process, press [A OPEN/CLOSE]
repairing process.
on the front panel, then select “Yes” and press [OK]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
Do you want to cancel a repairing
repairing process MAY NOT work.
process? When selecting “Yes”,
the disc may not be usable.
Yes
No
Repairing
The clock display does not appear in
the front panel display.
When you forget the password for
parental lock.
No analog TV closed captions are
output.
• Check that the AC power cord is connected securely.
• (In case of power failure) Check the breaker and clock setting.
• Please cancel the password and the set level. (Refer to page 104.)
• If you are using HDMI connection to watch the TV programs through
this unit, analog TV closed caption cannot be output. Try using another
output connection to the TV.
DV signal cannot be input.
• Before connection, turn on the power supplies for both this unit and the
DVC, and make sure that these units have stopped.
• Only a “DVC-SD” signal can be input from the DVC to this unit. Other
types of signals are not supported.
• Do not connect any device other than the DVC. Even if a recorder or PC
with another DV terminal is connected, the DV function will not operate.
• If the DVC is not recognized after connection, turn off the power supply
for the unit and re-connect the DVC.
The DVC cannot be operated with this • Signal input or DVC operation from this unit may be disabled
unit.
depending on the type of DVC.
• If a DVC signal cannot be input, use an external input (L1/L2) for analog
connection via audio/video cables.
• DVC control may be disabled depending on the type of DVC, even in a
mode other than camera mode. In this case, switch to HDD/DVD control
and execute the normal recording procedure while operating the DVC.
114 EN
TROUBLESHOOTING
Only specific channels do not appear.
The external input channels (such as
L1, L2 or L3) cannot be skipped.
The image from the external device • Try pressing [SOURCE] repeatedly.
cannot be displayed or recorded.
• Turn on all connected devices.
• Check if the connections are made securely and correctly.
Timer recording cannot be
performed.
DVD
100%
”
Español
EN 115
Others
The indication
“ Writing to Disc
does not disappear.
• Copy-once programs cannot be recorded on DVD. This is not a
malfunction.
• Check if the disc is protected or finalized. Undo the protection or the
finalization.
• DVD-RW once formatted on other unit cannot be recorded on this unit
unless all the contents in the disc are erased.
• Check if the connections are made securely and correctly.
100% ” may remain on screen for the
• “ Writing to Disc
maximum of 20 seconds even after it reached 100%. This is not a
malfunction.
Function Setup
The picture of the autostart
recording disappears.
When playing back the title
recorded from the autostart
recording, the DTV program
information is displayed and it
cannot be disappeared.
Recording is impossible.
Editing
• It is prohibited to make a recording from 2 minutes before the
programmed start time of a timer recording.
• This unit cannot record programs that contain copy protection signal.
This is not a malfunction.
• The space of the recording media may be used up. Try deleting
unnecessary titles, or exchange it with the recordable media.
• The maximum number of titles or chapters has exceeded. Delete the
unnecessary titles to make enough space or insert a new recordable media.
• Check if the connections are made securely and correctly.
• The internal clock of the unit may have been stopped due to a power
failure that lasted for more than 30 seconds. Reset the clock. (Refer to
pages 32-34.)
• The contents of the autostart recording will be cleared in some cases
(Changing input channel etc.). Refer to page 46.
• In the autostart recording, when you display the DTV program
information, the information will be recorded as the part of the picture.
GENERAL
HDD / DVD
Recording is impossible.
RECORDING
HDD
• Check if the connections are made securely and correctly.
• Check if the cables are damaged.
• Try channel setting by following the steps on pages 29-31.
• The channels may be set to be skipped. (Refer to pages 30-31.)
• This unit does not skip the external input channels. This is not a
malfunction.
Playback
GENERAL
CHANNEL
TV channels cannot be changed.
Recording
Setup menu cannot be called up.
Basic Setup
No image from HDMI connection.
Remedy
• Some functions may not operate depending on the type of DVC. For
example, if the DVC does not support slow playback mode, the slow
playback function is disabled.
• With L3(DV-IN), the disc display menu does not appear unless disc
playback is executed.
• For recording with the DVC, the recording audio signal can be set to 12
bits or 16 bits. However, when 16-bit recording mode is selected, audio
signal cannot be switched. To record an audio signal, set it to 12 bits.
• Check the HDMI connection. (Check the status of the HDMI related
indications.)
• Check whether the connected monitor device or other device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
• Setup menus cannot be called up during DVD recording.
Connections
DV audio signal cannot be switched.
Introduction
Symptom
Certain functions of the DVC cannot
operate.
TROUBLESHOOTING
Symptom
TV aspect ratio does not match
your TV screen.
DVD
PLAYBACK
HDD HDD/DVD
GENERAL
Playback picture is distorted.
Color of the picture is abnormal.
There is no sound, or no subtitle.
Playback does not start from the
beginning.
HDD playback suddenly stops.
Remedy
• Check the TV aspect ratio. (Refer to page 111.)
• A different aspect ratio will be used when the aspect ratio specified by
the disc is not supported by this unit.
• During fast forward or fast reverse, playback picture may be distorted.
This is not a malfunction.
• Connect to TV directly. When you connect this unit with the television
via VCR or other devices, the picture may be distorted due to the copyprotection signal.
• Check if the cables are damaged.
• Keep the equipment which may cause electrical disturbances, such as a
cellular phone, away.
• Turn on all connected devices.
• Check if the external input channel is set correctly.
• Check if the connections are made securely and correctly.
• If using the HDMI connection, sound is not output when “HDMI Audio”
is set to “OFF”.
• Check the RCA audio cable connection. If you are using HDMI-DVI
conversion cable, you must connect the RCA audio cable, too.
• If using the HDMI connection, check whether the output format of this
unit (HDMI FORMAT) matches the supported input format of other
connected device.
• Resume function may be activated. Refer to page 72 to cancel the
resume point.
• When DVD recording finishes during HDD playback, the unit will stop
the HDD playback, and start writing data to the DVD. This is not a
malfunction.
Playback cannot be performed.
• Check if the playable disc is inserted.
• Check if the disc is loaded correctly with the labeled side facing up.
• Discs made on other devices or on personal computers cannot be
played back on this unit unless it is finalized on the device.
Even if it is finalized, the performance of those discs are not guaranteed
on this unit.
• The disc may be dirty or flawed. Clean the disc.
• Check if all the connections are made correctly.
• Check the parental lock setting. (Refer to page 104.)
• Playback of DVD is prohibited from 2 minutes before the programmed
start time of a timer recording when the recording media is DVD.
There is no sound, or no subtitle.
• Check if “Disc Audio” is set correctly. (Refer to page 105.)
• There is a possibility that the selected subtitle language is not
supported by the disc.
Digital audio setting cannot be
• If the audio source is in the Dolby Digital format, set the Dolby Digital
changed to main audio (L), sub
Setting to “PCM” in “Playback” menu. (available only for DVD) (Refer to
audio (R) or combination of both.
page 105.)
Audio language or the subtitle
• Multilingual subtitles are not supported by the disc.
language of the DVD cannot be
• Some audio languages or the subtitle languages can be changed only
changed.
from the disc menu. Please refer to the disc’s manual.
Camera angles cannot be changed. • Even though the multi-angle feature is supported by the disc, that does
not mean all the scenes are shot from multi-angles. Changing angles are
available only for those scenes shot from the multi-angle.
The disc cannot be played back on • Some DVD players do not play back the disc made on other recorder.
other player even though it is
Refer to the manual of the unit.
finalized properly.
116 EN
TROUBLESHOOTING
HDD / DVD
EDITING
DVD
Titles cannot be edited or deleted.
The remote control does not function. • No batteries in the remote or the batteries may be weak. Replace the
batteries.
• Make sure there is no obstacle between the remote and the unit.
• Try getting closer to the unit. (Refer to page 12.)
• If above solutions do not solve the problem, please call an Authorized
Service Center.
Basic Setup
The capacity of the disc doesn’t
increase even if the recorded
program is deleted.
Dubbing cannot be executed.
Connections
Recording
REMOTE CONTROL
Dubbing cannot be executed.
Remedy
• The titles or the disc itself may be protected. Cancel the protection by
following the steps on page 93 for title protection and page 62 for disc
protection.
• When the number of the titles or the chapters exceeds the maximum
recordable number, the dubbing will not be executed.
• Dubbing of a “copy-once only” program is not possible with this unit.
• The titles in the DVD+R/-R cannot be edited or deleted if they are
finalized. If it is DVD-RW, undo the finalization by following the steps on
page 63.
• With DVD+RW/-RW, the disc space will increase only when the last title
is deleted. With DVD-R/+R, deleting a title will not increase the disc
space.
• Check if the disc is compatible for recording (refer to page 41).
Introduction
Symptom
Titles cannot be edited or deleted.
Playback
Editing
Function Setup
Others
Español
EN 117
TROUBLESHOOTING
Error message
Cause
Solution
Disc Error
— Please eject the disc. —
Playback feature may not be available on
this Disc.
• Unplayable disc is inserted in the unit.
• The disc is upside down.
• Insert the standardized disc which bear
the marks on page 65.
• Insert the disc with the labeled side
facing up.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• Insert the DVD-video with region codes
1 or ALL.
Parental Lock On
The current selected parental level
prohibits playback.
• The current selected parental level
prohibits playback.
• Check “Parental Lock” setting in
“Playback” menu (page 104).
Recording Error
This program is not allowed to be
recorded.
• The recording function encountered
the copy prohibited program.
• You cannot record copy prohibited
programs.
Recording Error
This program is not recordable in +VR
mode.
• You are trying to record the copy-once
program.
• You cannot record the copy-once
program.
Recording Error
Cannot record on this disc.
• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• The disc is dirty.
• The disc is damaged.
• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (page 41).
• Clean the disc with a cleaning cloth.
• Replace the disc.
Recording Error
This disc is protected and not recordable.
• You are trying to record on to the
protected disc which is set in “Disc Edit”
menu.
• Release the disc protect setting in “Disc
Edit” menu (page 62).
Recording Error
Disc is full.
(No area for new recording)
• You are trying to record onto the disc
which has no space for recording.
• Insert the recordable disc with enough
recording space.
Recording Error
You cannot record more than 49 titles on
one disc.
(The maximum is 49)
• You are trying to record onto the disc
on which the number of recording titles
comes up to the maximum (49).
• Delete unnecessary titles (pages 83-84).
Recording Error
You cannot record more than 254 chapters
on one disc.
(The maximum is 254)
• You are trying to record onto the
DVD+RW or DVD-RW on which the
number of recording chapters comes
up to the maximum (254).
• Delete unnecessary chapter marks
(pages 88-89).
Recording Error
You cannot record on this disc as Power
Calibration Area is full.
• When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
• Every time you insert a disc for
recording, the disc’s working area will
be taken up. And if you repeat this
frequently, it will be used up sooner
and you may not be able to record full
49 titles.
• Insert a new disc.
Recording Error
This disc is already finalized.
• You are trying to record onto the disc
already finalized.
• Release the finalizing for this disc
(page 63).
Recording Error
The disc has no recording compatibility.
Set “Make Recording Compatible” to
“ON” to convert the disc.
• You are trying to record onto the
disc that had been recorded by other
recorders.
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc (page 43).
Recording Error
You cannot record more than 600 titles
on HDD. (The maximum is 600).
• You are trying to record onto the HDD
when total title number is already at its
limit.
• Delete unnecessary titles (pages 83-84).
Recording Error
Cannot record on this HDD.
• The internal HDD is dirty or damaged.
• There is not enough space on the
internal HDD.
• Contact the customer service center.
• Delete unnecessary titles (pages 83-84).
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.
118 EN
LANGUAGE CODE
Editing
Function Setup
Others
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Playback
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Recording
Code
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
Basic Setup
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Connections
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
Introduction
Language
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Español
EN 119
GLOSSARY
Analog Audio
PBC (playback control) (video CD only)
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.
This function enables you to play back interactive
software using a menu screen. See also “Video CD”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
Chapter (HDD/DVD)
Just as a book is split up into several chapters, a title on
HDD/DVD is usually divided into chapters. See also “Title”.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video (480p),
you can experience higher-density picture than that in
interlace (480i).
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analogto-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
Dolby Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
multi channel audio.
Finalize
To make DVD, which have been recorded on, possible to
play back in DVD players. With this unit, it is possible to
finalize DVD+R, DVD-RW, and DVD-R.
HDMI (high definition multimedia interface)
PCM (pulse code modulation)
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
lot of data compared to formats such as Dolby Digital
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Progressive Scan (480p)
A type of display that does not split each frame into
fields, and instead scans directly through all the scan lines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(480i) TV signals. Refer to page 111 for instructions on
selective progressive scan mode.
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
SAP (secondary audio program)
Sub-audio channel which is delivered separately from
main-audio channel. This audio channel is used as an
alternate in bilingual broadcasting.
S-Video Output
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.
Title (HDD/DVD)
JPEG (joint photographic experts group)
Audio CD use tracks to divide up the content of a
disc. The DVD equivalent is called a chapter. See also
“Chapter”.
JPEG is a method of compressing still image files. You can
copy JPEG files on CD-RW/-R from a computer and play
back the files on this unit.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R from the computer and play back the
files on this unit.
120 EN
A collection of chapters on HDD/DVD. See also “Chapter”.
Track
Video CD
A digital format for store video data in compact disc.
SPECIFICATIONS
120V AC +/- 10%, 60Hz +/- 5%
33W (standby: 5.7W)
16.6 x 2.4 x 11.5 inches (420 x 59 x 290mm)
7.50 lbs. ( 3.40kg )
41°F (5°C) to 104°F (40°C)
Less than 80% (no condensation)
ATSC / NTSC-M TV standard
+VR (video recording) format
DVD+Rewritable, DVD+Recordable
DVD-Rewritable, DVD-Recordable (+VR mode only)
13.5 MHz
MPEG 2
Audio recording format
Sampling frequency
Compression format
48 kHz
Dolby Digital
VHF 2~13, UHF 14~69
2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A
2V rms (input impedance: more than 22kΩ)
Playback
Front
Channel frequency synthesized tuning system
Recording
1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
C: 286mVp-p (75Ω)
IEEE 1394
75Ω unbalanced
Editing
2V rms (input impedance: more than 22kΩ)
2V rms (output impedance: more than 1kΩ)
1Vp-p (75Ω)
Function Setup
Rear
Basic Setup
Video recording format
Sampling frequency
Compression format
1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
C: 286mVp-p (75Ω)
Y: 1Vp-p (75Ω)
C: 286mVp-p (75Ω)
Y: 1Vp-p (75Ω)
PB/CB: 700mVp-p (75Ω)
PR/CR: 700mVp-p (75Ω)
500mVp-p (75Ω)
Others
Tuner
Tuning system
Channel coverage (ATSC / NTSC)
Terrestrial
CATV
Terminals
Audio input
RCA jack x 2
Video input
RCA jack x 1
S-video input
Mini DIN 4-pin x 1
DV input
DV input jack (4 pin)
VHF/UHF/CATV input and output
F-type
Audio input
RCA jack x 2
Audio output
RCA jack x 2
Video input
RCA jack x 1
Video output
RCA jack x 1
S-video input
Mini DIN 4-pin x 1
S-video output
Mini DIN 4-pin x 1
Component video output
RCA jack x 3
Coaxial digital audio output
RCA jack x 1
HDMI output
HDMI jack x 1
Connections
Recording discs
Introduction
General
Power requirements
Power consumption
Dimensions (width x height x depth)
Weight
Operating temperature
Operating humidity
TV system
Recording
Recording format
Note
• The specifications and design of this product are subject to change without notice.
Español
EN 121
ESPAÑOL
Discos Reproducibles
Disco Grabable
Este aparato es compatible con la reproducción de los
siguientes discos y archivos.
Discos reproducibles
Logotipos
DVD-video
Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y
DVD-R.
Los discos DVD+R/DVD-R pueden ser grabados sólo una
vez. Los discos DVD+RW/DVD-RW pueden ser grabados y
borrados muchas veces.
En este aparato los discos DVD-RW/-R serán grabados
automáticamente en el modo DVD+VR.
Logotipos
Atributos
DVD+RW
DVD+R
DVD+RW
DVD+R
DVD-RW
DVD-R
DVD-RW
(Sólo discos en modo de video finalizados)
DVD-R
(Sólo discos en modo de video finalizados)
Disco de 8 cm / 12 cm, un solo lado,
una sola capa
Tiempo de grabación máx. aprox.
(modo SLP):
360 minutos (4,7 GB) (para 12 cm)
108 minutos (1,4 GB) (para 8 cm)
• Los siguientes discos se recomiendan para obtener una
buena calidad de grabación y han sido comprobados
como compatibles con este aparato. Sin embargo, según
sea la condición del medio el equipo podría no leer el
disco correctamente.
Verbatim
DVD+R 8x,
DVD+RW 4x,
DVD-R 8x,
DVD-RW 2x
JVC
DVD-RW 4x
Maxell
DVD+R 4x/8x/16x, DVD-R 8x/16x
SONY
DVD+R 4x/8x/16x, DVD+RW 4x
TDK
DVD+R 4x/8x/16x
El comportamiento de cualquier otro disco no está
garantizado.
• Usted puede reproducir discos DVD+RW en la
mayoría de los reproductores de DVD sin finalizarlos.
Sin embargo, si usted ha añadido o eliminado
capítulos, u ocultado capítulos, debe ejecutar
“Compatibilizar edic.” antes de poder ver dichos
efectos en otros equipos. (Consulte la página 98.)
Para reproducir discos que no sean DVD+RW en
otros reproductores de DVD, usted necesitará
finalizarlos.
CD-DA (CD de audio)
CD de video
CD-RW
CD-R
Kodak Picture CD
Disco no Grabable
Archivos reproducibles
MP3
Soportes
CD-RW/-R
JPEG
es una marca registrada de
DVD Format/Logo Licensing Corporation.
Códigos de Región
El número presente en el interior
el globo se refiere a una región
del mundo.Este aparato puede
reproducir discos DVD que estén
rotulados para ALL las regiones o
para la región 1.
122 ES
• Un DVD-RW grabado en un modo distinto de +VR no
será grabable en este aparato a menos que usted borre
todo el contenido del disco. (Consulte la página 97.)
• Un DVD-R grabado en un modo distinto de +VR no será
grabable en este aparato.
ESPAÑOL
Introduction
Conexión Básica
cable RCA de vídeo
VIDEO
OUT
L
VIDEO IN
AUDIO IN
Connections
L
cable RCA de audio
R
R
AUDIO OUT
parte trasera de la unidad
IN
V DEO VIDEO
IN
OUT
Y
Basic Setup
L
L
OUT
R
ANTENNA
AUDIO IN
L1)
N
R
-V DEO A D O UT
OUT
COAX AL
ANT. IN
-VIDEO
cable
coaxial de RF
Esta conexión es sólo para
el procesamiento de cada
elemento de la señal de TV
antena de
VHF / UHF
IN
ANTENNA
cable
coaxial
de RF
o
empresa de
TV por cable
Playback
Cables suministrados:
• cable coaxial de RF x 1
• cable RCA de audio (L/R) x 1
Por favor, compre el resto de los cables necesarios en su tienda local.
Recording
OUT
• cable RCA de vídeo x 1
Editing
Function Setup
Others
Español
ES 123
ESPAÑOL
Conexión a un Televisor con un Puerto Compatible con HDMI
• HDMI emite las señales de video / audio sin convertirlas en señales analógicas.
• No es necesaria una conexión de audio.
HDMI IN
cable HDMI
HDMI OUT
parte trasera de la unidad
V DEO VIDEO
IN
OUT
IN
Y
L
OUT
R
ANTENNA
AUDIO IN
(
)
R
N
-V DEO A D O UT
OUT
COAX AL
-VIDEO
ANT. IN
cable
coaxial
de RF
No incline el conector para introducirlo en la toma HDMI y compruebe que el tipo
de toma corresponde con el tipo de conector.
IN
Esta conexión es sólo
para el procesamiento
de cada elemento de
la señal de TV
antena de
VHF / UHF
OUT
cable coaxial
de RF
ANTENNA
o
empresa de
TV por cable
Cables suministrados:
• cable coaxial de RF x 1
Por favor, compre el resto de los cables necesarios en su tienda local.
Modo HDMI y señales efectivas de salida
Presione [HDMI] para seleccionar el modo de salida HDMI. Cada vez que se presiona [HDMI] el modo de salida varía
como sigue.
Pantalla del
panel frontal
Señal de salida
de video
Progresivo de 480
Presione [HDMI]
Progresivo de 720
Presione [HDMI]
1080 entrelazado
Presione [HDMI]
Progresivo de 1080
Presione [HDMI]
• El modo HDMI que no esté admitido por el
dispositivo de exhibición será pasado por alto.
124 ES
ESPAÑOL
].
3
Ajuste inicial
Connections
1
2
Presione [STANDBY-ON
Utilice [K / L] para seleccionar el tipo de
señal de emisión, y luego presione [OK].
Ajuste de Canal
Encienda el televisor. Seleccione la entrada a
la cual está conectado el aparato.
Verificar que la antena esté
conectada a la toma "ANTENNA IN".
Antena
Cable (Analógico)
Cable (Analógico/Digital)
Utilice [K / L] para seleccionar su
idioma deseado, y luego presione
[OK] para establecerlo.
Ajuste Auto escaneará los canales terrrestres.
Esto tarda unos momentos en finalizar.
4
English
Français
Español
Utilice [{ / B] para seleccionar un
elemento a configurar, y utilice [K / L]
para seleccionar el contenido de su
preferencia, y luego presione [OK].
Basic Setup
El equipo comenzará a obtener los canales
disponibles en su región.
Initial Setup
Language
Introduction
Configuración Inicial
Cuando usted encienda este aparato por primera vez
necesita seguir estos pasos.
Recording
Ajuste inicial
Ajste Manual de Reloj
ENE / 01 / 2010 ( VIE )
12 : 00 AM
Grabación Básica
1
* Asegúrese de que el disco sea compatible con
este aparato. (Para obtener la lista de discos
compatibles consulte la página 122.)
Tiempo de grabación
HQ
SP
SPP
LP
EP
SLP
Disco de 8 cm Disco de 12 cm HDD (interno)
18 min
60 min
64 hrs
36 min
120 min
129 hrs
45 min
150 min
161 hrs
54 min
180 min
193 hrs
72 min
240 min
258 hrs
108 min
360 min
387 hrs
Esta es una manera sencilla de configurar el tiempo de
grabación en bloques de 30 minutos.
Presione [REC] repetidamente hasta que aparezca en la
pantalla del televisor la longitud deseada de grabación
(30 minutos a 6 horas).
Comenzará la grabación a un toque con temporizador.
I
Calidad del video
y el sonido
Buena
0h30m
(grabación normal)
6h00m
Deficiente
Consulte “Switching Analog Mode/Digital Mode”
y “Channel Selection” en la página 35.
1h00m
5h30m
Para cambiar la duración de la grabación durante la
grabación a un toque con temporizador:
Presione [REC] repetidamente hasta que aparezca la
duración deseada.
Para cancelar la grabación a un toque con
temporizador dentro del tiempo especificado:
Presione [STOP C].
5
Para de tener la grabación presione
[STOP C].
ES 125
Español
Seleccione un canal externo de
entrada adecuado presionando
[SOURCE] o [CHANNEL / ].
Presione [DTV/TV] para seleccionar TV
analógica o TV digital, luego y utilice
[CHANNEL / ] o [los botones
numéricos] y [ • ] (para canales de TV
digital) para seleccionar un canal que
se desee grabar.
0h30m
Others
3
Modo de
grabación
Para configurar la grabación a un toque
con temporizador (OTR)...
Function Setup
2
Para seleccionar un modo de grabación
presione repetidamente [REC MODE].
4
Presione [REC] para iniciar la
grabación.
Editing
Presione [OPEN/CLOSE A]
para abrir la bandeja de
discos e insertar su disco
con el rótulo aupntando
hacia arriba. Presione de
nuevo [OPEN/CLOSE A] para cerrar la
bandeja de discos.
Playback
Si usted está reproduciendo los títulos de una unidad de disco rígido, presione primero [HDD] y luego continúe al paso 2.
Si usted está reproduciendo los títulos de un DVD, presione primero [DVD].
ESPAÑOL
Copiado Básica
Preparación para el copiado (unidad de disco rígido a DVD):
• Inserte un DVD grabable.
Preparación para el copiado (DVD a unidad de disco rígido):
• Inserte un disco a ser copiado.
1
2
3
Presione [SETUP] en el modo de
detención.
Utilice [K / L] para seleccionar
“Doblaje”, y luego presione [OK].
Unidad de disco rígido a DVD
Utilice [K / L] para seleccionar
“HDD DVD”, y luego presione [OK].
DVD a Unidad de disco rígido
Utilice [K / L] para seleccionar
“DVD HDD”, y luego presione [OK].
4
Utilice [K / L] para seleccionar
“Añadir”, y luego presione [OK].
HDD
DVD
3000 MB
Lista doblaje
Añadir
Borrar todo
Inic de doblaje
5
6
Utilice [K / L / s / B] para seleccionar
un título deseado, y luego presione
[OK].
En la esquina superior de cada título aparece el
número en el orden de selección.
Repita el paso 5 hasta que haya
registrado todos los títulos que
desea copiar; a continuación, pulse
[D. DUBBING].
Lista de Títulos
ABCDE
12:00AM (10:00:00) JAN/ 1/10
2
1
2
3
3
4
5
5
4
6
Puls. ‘D. DUBBING’ y confirme.
7
CH10 SP
1
1/6
Luego de añadir todos los títulos que
desea, utilice [K / L] para seleccionar
“Inic de doblaje” en el menú de
copiado, y luego presione [OK].
126 ES
8
9
Utilice [s / B] para seleccionar un
modo de grabación deseado, y luego
presione [OK].
Utilice [K / L] para seleccionar “Sí”, y
luego presione [OK].
El copiado comenzará.
Para detener el copiado en curso:
Presione [C STOP] en el panel frontal.
Presione [STOP C] en el control remoto durant 2
segundos.
A la hora de realizar una copia del HDD al DVD
aparecerá un mensaje de confirmación;
seleccione “Sí”.
Copiado a un toque......
Con el copiado a un toque, usted puede comenzar a
copiar de inmediato con sólo un toque.
Para copiar el contenido de un DVD que está finalizado
en otro equipo, utilice esta función.
Durante la reproducción del título que desea
copiar, presione [D.DUBBING].
Si usted está reproduciendo un DVD, el copiado del DVD
a la unidad de disco rígido comenzará de inmediato.
Si usted está reproduciendo una unidad de disco rígido,
el copiado de la unidad de disco rígido al DVD
comenzará de inmediato.
• El copiado comenzará desde el comienzo del título que
está siendo reproducido.
• El aparato sólo copiará el título que está siendo
reproducido.
• Cuando se copia de una unidad de disco rígido a un
DVD, el modo de grabación será configurado
automáticamente a “Alto” cada vez que se satisfagan las
condiciones (consulte la página 53). De lo contrario,
será aplicado automáticamente el último modo de
grabación seleccionado.
Para detener el copiado en curso:
Presione [C STOP] en el panel frontal.
Presione [STOP C] en el control remoto durant 2 segundos.
A la hora de realizar una copia del HDD al DVD aparecerá un
mensaje de confirmación; seleccione “Sí”.
ESPAÑOL
Si usted está reproduciendo los títulos de una unidad de disco rígido, presione primero [HDD] y luego continúe al paso 2.
Si usted está reproduciendo los títulos de un DVD, presione primero [DVD].
Para detener momentáneamente la
reproducción presione [STOP C]
una vez.
• Consulte “Resume Playback” en la página 72.
Basic Setup
* Asegúrese de que el disco sea compatible con
este aparato. (Para obtener la lista de discos
compatibles consulte la página 122.)
2
3
Para iniciar una reproducción
presione [PLAY B].
Connections
1
Presione [OPEN/CLOSE A]
para abrir la bandeja de
discos e insertar su disco
con el rótulo aupntando
hacia arriba. Presione de nuevo
[OPEN/CLOSE A] para cerrar la
bandeja de discos.
Introduction
Reproducción Directa
Recording
Playback
Editing
Function Setup
Others
Español
ES 127
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship
as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
Note: Any product sold and identified as refurbished or renewed carries a ninety (90) days labor and parts
limited warranty.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any
product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI SERVICE CORPORATION
Tel: 1-800-605-8610
www.magnavox.com/support
2200 Spiegel Drive Groveport, OH 43125
E2S01UD
1VMN29193B ★★
Printed in China
* 1 V M N 2 9 1 9 3 B *
Download PDF