Universal Remote Control URC-4041 User`s guide

IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 1
6-DEVICE PVR
Universal Remote Control
User’s Guide
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 2
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features And Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Programming Device Control . . . . . . . . . . . . . . . . . . . . . . . . 9
Programming DVD Player/VCR Combo Control. . . . . . . . 10
Searching For Your Code . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Programming Master Power . . . . . . . . . . . . . . . . . . . . . . . . 12
Programming The Power Key For Master Power. . . . . . . . . . . . 12
Operating Master Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Clearing Master Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using Keymover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Programming Keymover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Restoring Keymoved Keys To Default Settings. . . . . . . . . . . . . 14
Restoring A Single Keymoved Key . . . . . . . . . . . . . . . . . . . . . . 14
Restoring All Keymoved Keys In A Single Mode . . . . . . . . . . . . . 15
Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . . . . . . . . 15
Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Locking Volume Control To One Mode
(Global Volume Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Unlocking Volume Control For A Single Device
(Individual Volume Unlock) . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Unlocking All Volume Control
(Restoring Default Setting ) . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setup Codes for Audio Receivers . . . . . . . . . . . . . . . . . . . . . . 17
Setup Codes for Cable Boxes (Converters) . . . . . . . . . . . . . . . 18
Setup Codes for CD Players . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setup Codes for DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setup Codes for DVD Player/VCR Combos. . . . . . . . . . . . . . . . 21
Setup Codes for PVRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Setup Codes for PVR/Satellite Receiver Combos. . . . . . . . . . . 22
Setup Codes for Satellite Receivers . . . . . . . . . . . . . . . . . . . . 22
Setup Codes for TVs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Setup Codes for TV/DVD Player Combos . . . . . . . . . . . . . . . . . 27
Setup Codes for TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . 27
Setup Codes for VCRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
About Upgrading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Upgrade Exclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Instructions To The User . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 3
INTRODUCTION
The One For All 6-Device PVR Universal Remote
Control (URC-6131) is designed to remotely operate
up to six home entertainment devices and features
intuitive and easy-to use buttons to operate PVR
(Personal Video Recorders) and DVD components. Its
sophisticated technology will allow you to consolidate all
of your original home entertainment remote controls
into one easy-to-use product.Advanced features include:
• Intuitive buttons to allow easy access to your PVR or
DVR (Digital Video Recorder) functions and menus
• Direct code setup for easy device programming
• Step and Set code setup and Code Verification for an
alternate way to program devices
• Master Power function for master on/off control of
all of your equipment with a single keystroke
• Volume Lock to lock volume controls to one mode or
individual modes
• Device Key Re-Assignment to remotely control
a second (duplicate) device
• Color-coded keys to quickly locate popular functions
• Code library for popular video and audio devices
The URC-6131 remote control requires two (2) new
AA alkaline batteries (not included) and some easy
programming to control your devices. For best results,
please read and perform all instructions listed here.
Also, keep these instructions for future reference.
3
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 4
FEATURES AND FUNCTIONS
Use the illustration below to locate features on the
One For All 6-Device PVR Universal Remote Control
(URC-6131) and then study the Key Charts (on the next
three pages) to learn how they function.
To find out what type of devices can be controlled by
each device key after programming, see the Device
Table on page 7.
4
2/21/03
5:46 PM
Page 5
Key Charts
When the LED (red light) blinks, the
remote control is working and (after
programming) is sending signals.
Press TV, PVR, DVD, CBL/SAT, AUD,
or VCR once to select a desired
home entertainment device
to control.Also see the Device Table
on page 7.
Press POWER once to turn on or off
the selected device. For master
power control, see Programming
Master Power on page 12.
Press MENU once to display your
selected device’s main menu. For
PVRs, use PVR Menu.
Use INFO to display the current
channel and program information.
Use GUIDE to display your selected
device’s program guide or setup
menu.
Use EXIT to exit from your selected
device’s guide or menu.
Use the cursor keys to move the
cursor in the program guide and
menu screens.
Use SELECT to choose options from
your selected device’s menu or guide.
▲
In the AUD mode, use SELECT to set
the surround sound. Use ▲ (or ▼)
to adjust the volume higher (or
lower). Use (or ) to adjust the
balance left (or right).
▲
IMPK6VR manual 1.0
Use VOL+ (or VOL-) to raise (or
lower) the sound volume.
Use CH+ (or CH-) to select the next
higher (or lower) channel.
Press Mute once to turn the sound
off or on.
Use to command your PVR to
instantly replay the last 7 seconds
of a program you are viewing.
continued on next page...
5
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 6
FEATURES AND FUNCTIONS
Key Charts (continued)
Press Prev. once to recall the lastviewed channel and to page back
one screen on the main menu.
In the AUD mode, use Prev. to select
the receiver band.
Use or to perform the Thumbs
Down or Thumbs Up feature on
your Tivo/PVR device.
Press PVR Menu once to turn the
PVR’s main menu on or off.
Use to command your PVR to
skip or advance through a recorded
program scene or commercial.
Use the transport keys to control
your VCR, PVR, DVD player, or VOD
(Video On Demand) if available on
your cable or satellite service.
Press REC twice to record a PVR or
VCR program.
Use Audio/CC to select an alternate
audio channel (e.g., Spanish) or
closed captions, if available on your
cable/satellite service or DVD.
Press SUBT. once to turn subtitles
on or off, if available.
Use ANGLE/SLEEP to perform the
angle function on your DVD player
or to set the sleep timer on a
selected device if equipped with
this feature.
Use for slow motion playback
on a VCR, PVR, or DVD player
equipped with this feature. Press
PLAY to cancel slow motion.
Use the keypad (1 ~ 9 and 0) to
directly select channels (e.g., 009
or 031).
In the AUD mode, use the keypad
(1 ~ 9 and 0) to select audio sources
1 through 10.
6
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 7
Press ENTER once after entering
the channel numbers on some TVs.
Use TV/VID to switch the TV’s input
to view TV or video programs.
Use PIP to switch the Picture-InPicture feature on or off (if available
on your TV).
Use Swap to switch images and
sound between the main and
window pictures.
Use Move to move the window
picture to different positions in the
main picture.
Use SET for all programming
sequences.
Device Table
NOTE: Please refer to the table below when performing the
instructions in “Programming Device Control” on page 9 or
“Programming DVD Player/ VCR Combo Control” on page 10.
After programming, the One For All 6-Device PVR
Universal Remote Control will be able to control the
following types of devices:
DEVICE KEY
CONTROLS THESE TYPES OF DEVICES
Televisions
PVRs (Personal Video Recorders)
Cable Boxes (Converters), Satellite Receivers,
or Satellite/PVR Combos
VCRs or TV/VCR Combos
DVD Player, DVD Player/VCR Combos, or
TV/DVD Player Combos
Audio Receivers or CD Players
NOTE: Audio Receiver/DVD Player Combos (i.e., Home
Theater In A Box) are listed in “Setup Codes For Audio
Receivers” on pages 17 and 18.
7
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 8
INSTALLING BATTERIES
❶
❷
❷
❸
1.
On the remote control’s back, push the tab
and lift off the battery cover.
2.
Obtain two (2) new AA alkaline batteries.
Match the + and – marks on the batteries
to the + and – marks in the battery case,
then insert the new batteries.
3.
Press the battery cover back into place.
The tab should click when the cover is
locked.
4.
Test the remote control by pressing
any mode key (e.g., TV). If the batteries are
inserted correctly, the LED (red light) will
blink once.
NOTE: When batteries need replacement, the remote control
will stop operating. Remove the old batteries and insert new
ones within 10 minutes to ensure all of your programming
information is restored.
8
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 9
PROGRAMMING DEVICE CONTROL
The One For All 6-Device PVR Universal Remote Control
is preprogrammed at the factory to operate an RCA TV,
VCR, and satellite receiver, a Philips Tivo PVR, a Toshiba
DVD player, and a Pioneer audio receiver/amplifier. To
control devices other than the default brands, perform
the following steps; otherwise skip this section:
NOTE: For DVD Player/VCR Combo control, see the next page.
1.
Turn on a desired device (e.g.,VCR or
DVD player) and, if applicable, insert
media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely
before proceeding. Highlight or write down the
codes and device you wish to program before
starting step 2.
2.
On the remote control,press a device key
once (i.e., TV, PVR, DVD, CBL/SAT, AUD,or VCR).
NOTE: To program control of a cable box or
satellite receiver, press CBL/SAT once.
NOTE: To program control of a CD player or
audio receiver, press AUD once.
NOTE: To program control of a TV/VCR Combo,
press VCR once. After programming, you will be
able to control channel selection, volume, and
VCR functions.
NOTE: To program control of a TV/DVD Player
Combo, press DVD once. After programming,
you will be able to control channel selection,
volume, and DVD functions.
3.
Press and hold SET until the LED (red light)
blinks twice, then release SET.
4.
Use the Manufacturer’s Codes (starting on
page 17) to locate the type of device and
brand name and then enter the first fourdigit code for your device. If performed
correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps
2 through 4 and enter the same code again.
5.
Aim the remote control at the device and
press POWER once. The device should turn
off. If it does not, repeat steps 2 through 5,
trying each code for your brand until you
find one that works. If it still doesn’t work,
try Searching For Your Code on page 11.
NOTE: If the device does not have a POWER
key, press the (Play) key.
continued on next page...
9
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 10
PROGRAMMING DEVICE CONTROL
(continued)
6.
Repeat steps 1 through 5 (on the previous
page) for each device you want to control.
For future reference,write down each
working device code in the following boxes:
TV Code:
PVR Code:
DVD Code:
CBL/SAT Code:
AUD Code:
VCR Code:
PROGRAMMING DVD PLAYER/VCR
COMBO CONTROL
1.
Turn on the DVD Player/VCR Combo and
insert a DVD.
NOTE: Please read steps 2 through 4 completely
before proceeding. Highlight or write down the
codes and device you wish to program before
starting step 2.
2.
On the remote control, press DVD. Next,
press and hold SET until the LED (red light)
blinks twice, then release SET.
3.
Use the Setup Codes For DVD Player/VCR
Combos (on page 21) to locate the brand
name and then enter the first four-digit
code for your device. If performed
correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps
2 through 4 and enter the same code again.
4.
Aim the remote control at the device and
press POWER once. It should turn off. If it
does not, repeat steps 2 through 4, trying
each code for your brand until you find one
that works. If it still does not work, try
Searching For Your Code on the next page.
NOTE: If the device does not have a POWER
key, press the (Play) key.
10
IMPK6VR manual 1.0
2/21/03
5:46 PM
5.
Page 11
If you’ve located a setup code that works,
but it also has a separate VCR code, you’ll
also need to program it into the remote
control to access VCR controls as follows:
a. Press VCR once. Then press and hold
the SET key until the LED blinks twice.
b. Enter the VCR code for your DVD
Player/VCR Combo. If correct, the LED
will blink twice.
NOTE: If a separate VCR setup code is not listed,
you can use the VCR key to program a separate
VCR device or another device (see “Re-Assigning
Device Keys”on page 15)
6.
For future reference, write down the
working DVD Player/VCR combo code in
the below boxes:
DVD/VCR Code:
VCR Code:
(if used)
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control
after trying all codes listed for your brand, or if your
brand is not listed at all, try searching for your code.
For example, to search for a code for your TV:
1.
On the remote control, press TV once.
2.
Press and hold SET until the LED (red light)
blinks twice, then release SET.
3.
Enter 9 - 9 - 1. The LED will blink twice.
4.
Aim the remote control at the the TV and
slowly alternate between pressing POWER
and TV. Stop when the TV turns off.
NOTE: In the search mode, the remote control
will send IR codes from its library to the selected
device, starting with the most popular code first.
5.
To lock in the code, press and release SET.
The LED will blink twice.
6.
To search for the codes of your other
devices, repeat steps 1 through 5, but
substitute the appropriate device key for
the device you are searching for.
11
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 12
CHECKING THE CODES
If you have set up the remote control using the
Searching For Your Code procedure (on the previous
page), you may need to find out which four-digit code
is operating your equipment.
For example,to find out which code is operating your TV:
1.
On the remote control, press TV once.
2.
Press and hold SET until the LED (red light)
blinks twice, then release SET.
3.
Enter 9 - 9 - 0. The LED will blink twice.
4.
To view the code for the first digit, press 1
once.Wait 3 seconds, count the LED
blinks (e.g., three blinks = 3) and write
down the number in the leftmost box in
the TV code boxes on page 10
NOTE: If a code digit is “0”, the LED will not
blink.
5.
Repeat step 4 three more times for
remaining digits. Use 2 for the second
digit, 3 for the third digit, and 4 for the
fourth digit. Write down the code digits in
the remaining TV code boxes on page 10.
6.
To check for codes of other devices, repeat
steps 1 through 5, but substitute the
appropriate device key for each device you
are checking.Write down the device’s code
digits in the appropriate code boxes on
page 10.
PROGRAMMING MASTER POWER
In its default state, the POWER key on the URC-6131
remote control will individually power your home
entertainment devices on or off. However, you can also
program a Master Power function onto the POWER key
that will sequentially turn on or off all the devices with
a single key press.
Programming The Power Key For Master Power
1.
Press and hold SET until the LED (red light)
blinks twice, then release SET.
12
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 13
2.
Enter 9 - 9 - 5. The LED will blink twice.
Then press POWER once.
3.
For the first device you want in the power
on sequence, press its device key (e.g.,
CBL/SAT) once.
4.
Repeat step 3 up to five more times to add
desired devices to the power-on sequence.
5.
To save the settings and exit the program,
press and hold SET until the LED blinks
twice, then release SET.
Operating Master Power
1.
After programming, point the remote
control at the devices and press POWER
for at least 2 seconds to sequentially turn
on or off your devices.
NOTE: When POWER is pressed for less than
2 seconds, a power command will only be sent
to the currently-selected device. This allows you
to still individually power devices on or off.
2.
You will see the devices turn on or off
according to your programmed sequence.
NOTE: The currently-selected device will always
turn on first, followed by the remaining
programmed sequence. After the master power
sequence has been completed, the remote control
will be set to control the first powered-on device.
NOTE: If one or more devices does not have a
POWER key, the power off/on sequence may be
slightly delayed when the remote control signals
the device(s). This action is normal.
Clearing Master Power
1.
Press and hold SET until the LED (red light)
blinks twice, then release SET.
2.
Enter 9 - 9 - 5. The LED will blink twice.
Then press POWER once.
3.
Press and hold SET until the LED blinks
twice, then release SET. Master Power is
now cleared.
13
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 14
USING KEYMOVER
The One For All 6-Device PVR Universal Remote
Control includes a Keymover feature that allows you to
map (or copy) keys from one mode (i.e., source mode)
to another mode (i.e., destination mode).
NOTE: The following keys cannot be used as a source or
destination: TV, PVR, DVD, CBL/SAT, AUD, VCR, and SET.
Programming Keymover
For example, if your VCR does not have volume control,
you can map those keys (i.e., VOL+, VOL-, and Mute)
from the TV mode to the VCR mode as follows:
1.
Press and hold SET until the LED (red light)
blinks twice, then release SET.
2.
Enter 9 - 9 - 4. The LED will blink twice.
3.
For the source mode, press TV once.
4.
For the source key, press VOL+ once.
5.
For the destination mode, press VCR once.
6.
For the destination key, press VOL+ once.
7.
The LED will blink twice indicating the
keymoved sequence is correct.
8.
Repeat steps 1 through 7 twice more to
map remaining volume control keys,
substituting VOL- and Mute as source and
destination keys in steps 4 and 6.
Upon completion of the above procedure, you can now
use your One For All 6-Device PVR Universal Remote
Control to control the TV’s volume and mute in the
VCR mode, as well as in the TV mode.
Restoring Keymoved Keys to Default Settings
Restoring A Single Keymoved Key
1.
Press a device key that has a keymoved key.
2.
Press and hold SET until the LED (red light)
blinks twice, then release SET.
3.
Enter 9 - 9 - 4. The LED will blink twice.
4.
Press the destination key twice (where the
keymoved key is stored). The LED will
blink twice.
14
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 15
Restoring All Keymoved Keys In A Single Mode
1.
Press and hold SET until the LED (red light)
blinks twice, then release SET.
2.
Enter 9 - 9 - 4. The LED will blink twice.
3.
Press the destination mode twice (where
keymoved keys are stored). The LED will
blink twice.
RE-ASSIGNING DEVICE KEYS
The One For All 6-Device PVR Universal Remote Control
can be set to control a second TV, PVR,VCR, DVD player,
or other device. For example, to control a TV, a cable box,
and two VCRs, you will need to re-assign the unused
DVD key to operate the second VCR as follows:
1.
On the remote control, press and hold SET
until the LED (red light) blinks twice, then
release SET.
2.
Enter 9 - 9 - 2. The LED will blink twice.
3.
Press VCR once, then press DVD once. The
LED will blink twice.
4.
The DVD key is now ready to be
programmed for your second VCR. See
Programming Device Control on page 9.
To re-assign other device keys to the DVD key, repeat
steps 1 through 4 with a sequence from the below chart:
NOTE: Only one device can be assigned to an unused device
key at a time.
To Re-Assign Device
Perform Sequence
DVD as 2nd TV key:
SET - 9 - 9 - 2 - TV - DVD
DVD as 2nd CBL/SAT key: SET - 9 - 9 - 2 - CBL/SAT - DVD
DVD as 2nd PVR key:
SET - 9 - 9 - 2 - PVR - DVD
DVD as 2nd AUD key:
SET - 9 - 9 - 2 - AUD - DVD
You can also re-assign another unused device key by
substituting it for the DVD key above and performing the
sequence. For example, to re-assign an unused AUD key
as a second VCR key, perform SET - 9 - 9 - 2 - VCR - AUD.
When a re-assignment is done, the LED will blink twice
to confirm your choice.At that time, you will need to
program the remote control for the new device (see
Programming Device Control on page 9).
15
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 16
CHANGING VOLUME LOCK
The One For All 6-Device PVR Universal Remote
Control is set at the factory for independent volume
control of each selected device.
However, you may change the Volume Lock setting to
Global Volume Lock so that a device’s volume will be
locked to one mode (e.g., to control TV volume in all
other modes).After that, if desired, you can perform
Individual Volume Unlock on a selected device to set its
volume control for independent operation.
Locking Volume Control To One Mode
(Global Volume Lock)
1.
Press and hold SET until the LED (red light)
blinks twice, then release SET.
2.
Enter 9 - 9 - 3 and then press any
mode key once (e.g., TV). The LED will
blink twice.
3.
Now, when you press VOL+, VOL-, or Mute,
the volume of the selected device (e.g., TV)
will be controlled regardless of the mode
you have selected.
Unlocking Volume Control For A Single Device
(Individual Volume Unlock)
1.
After performing Global Volume Lock (see
above),press a desired mode key where
you want volume to be unlocked (e.g.,
AUD) and controlled within its own mode.
2.
Press and and hold SET until the LED (red
light) blinks twice,then release SET.
3.
Enter 9 - 9 - 3 and then press VOL- once.
The LED will blink four times.
4.
If desired, repeat steps 1 through 3
(of this section) for each device that you
want volume to be unlocked.
5.
Now, after you select a device that has
volume unlocked (e.g., AUD), pressing
VOL+, VOL-, or Mute, will control the
device’s volume only in its own mode.
16
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 17
Unlocking All Volume Control (Restoring
Default Setting)
NOTE: Performing these instructions will restore independent
volume control for all programmed devices (e.g., TV volume
control in TV mode, VCR volume in VCR mode, etc.).
1.
On the remote control, press and hold SET
until the LED (red light) blinks twice,then
release SET.
2.
Enter 9 - 9 - 3 and then press VOL+ once.
The LED will blink four times.
3.
Volume will again be independently
controlled according to its default states
for all programmed devices.
MANUFACTURER’S CODES
Setup Codes For Audio Receivers
ADC
Aiwa
Alco
Anam
Apex Digital
Audiotronic
Audiovox
Bose
Capetronic
Carver
Denon
Harman/Kardon
JBL
JVC
KLH
Kenwood
Koss
Linn
MCS
Magnavox
Marantz
Musicmagic
Onkyo
0531
1089, 1405, 0121, 0158, 0189, 1388
1390
1609
1257
1189
1390
1229
0531
1089, 1189, 0189
1104, 1360
0110, 0189
0110, 1306
0074
1390
1313, 1027, 1570, 1569, 0027
1366
0189
0039
1089, 1189, 0189, 0531
1089, 1189, 0039, 0189
1089
0135, 0842, 1298
continued on next page...
17
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 18
MANUFACTURER’S CODES
Setup Codes For Audio Receivers (continued)
Optimus
Panasonic
Philips
Pioneer
Polk Audio
Proscan
Quasar
RCA
Samsung
Sansui
Sherwood
Sony
Soundesign
Stereophonics
Sunfire
Technics
Thorens
Venturer
Victor
Wards
Yamaha
1023, 0531, 0670
1518, 0039, 0309
1089, 1189, 1269, 0189
1023, 0014, 0150, 0531, 0630, 1384
0189
1254
0039
1023, 1254, 0531, 1390, 1609
1295
1089, 0189
1653
1058, 1258, 1158, 0158, 1558, 1658, 1758
0670
1023
1313
1308, 1309, 1518, 0039, 0309
1189
1390
0074
0014, 0158, 0189
0176, 1176
Setup Codes For Cable Boxes (Converters)
ABC
Americast
Bell & Howell
Bell South
Director
General Instrument
GoldStar
Hamlin
Jerrold
Memorex
Motorola
Pace
Panasonic
Paragon
Philips
Pioneer
Pulsar
Quasar
Regal
Runco
Samsung
0003, 0008, 0014, 0017
0899
0014
0899
0476
0476, 0003, 0276, 0810
0144
0009, 0273
0476, 0003, 0276, 0014, 0810
0000
0476, 0276, 0810
0237
0000, 0107
0000
0305, 0317
0877, 0144, 0533, 1877
0000
0000
0273, 0279
0000
0144
18
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 19
Scientific Atlanta
Sony
Starcom
Supercable
Torx
Toshiba
Zenith
0877, 0008, 0017, 0477, 1877
1006
0003
0276
0003
0000
0000, 0525, 0899
Setup Codes For CD Players
Aiwa
Burmester
California Audio Labs
Carver
Classic
DKK
DMX Electronics
Denon
Fisher
GPX
Garrard
Genexxa
Harman/Kardon
Hitachi
JVC
Kenwood
Koss
Krell
Linn
MCS
MTC
Magnavox
Marantz
Miro
Mission
NSM
Nikko
Onkyo
Optimus
Panasonic
Parasound
Philips
Pioneer
Polk Audio
Proton
QED
Quasar
0157
0420
0029, 0303
0157, 0179, 0437
1297
0000
0157
0873, 0003
0174, 0179
1296
0393, 0420
0032
0157, 0173
0032
0072, 1294
0681, 0826, 0626, 0028, 0037, 0190
1317
0157
0157
0029
0420
0157
0626, 0029, 0157, 0180
0000
0157
0157
0174
0868, 0101
1063, 0000, 0032, 0037, 0145, 0179, 0420, 0437
0029, 0303
0420
0626, 0157
1063, 1062, 0032
0157
0157
0157
0029
continued on next page...
19
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 20
MANUFACTURER’S CODES
Setup Codes For CD Players (continued)
RCA
Realistic
Rotel
SAE
Sansui
Sanyo
Sharp
Sherwood
Sonic Frontiers
Sony
Soundesign
TDK
Tascam
Teac
Technics
Victor
Wards
Yamaha
Yorx
1062, 0032, 0053, 0179
0179, 0180, 0420
0157, 0420
0157
0157
0179
0861, 0037, 0180
1067, 0180
0157
0490, 0000, 0100, 0185
0145
1208
0420
0174, 0180, 0393, 0420
0029, 0303
0072
0157, 0053
0888, 0036, 0187, 1292
0461
Setup Codes For DVD Players
Aiwa
Apex Digital
Audiologic
B&K
Blue Parade
Broksonic
DVD2000
Daewoo
Denon
Emerson
Enterprise
Fisher
GE
GPX
Go Video
Gradiente
Greenhill
Harman/Kardon
Hitachi
Hiteker
JBL
JVC
KLH
0641
0672, 0717, 0755, 0794, 0796, 0797, 0830, 1100
0736
0655, 0662
0571
0695
0521
0784
0490, 0634
0591
0591
0670
0522, 0717, 0815
0699, 0769
0715, 0783
0651
0717
0582, 0702
0573, 0664
0672
0702
0558, 0623, 0867
0717
20
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 21
Kenwood
Konka
Koss
Lasonic
Magnavox
Malata
Marantz
Microsoft
Mintek
Mitsubishi
Nesa
Next Base
Onkyo
Oritron
Panasonic
Philips
Pioneer
Polk Audio
Princeton
Proscan
RCA
Rotel
Rowa
Sampo
Samsung
Sansui
Sanyo
Sharp
Sherwood
Shinsonic
Sony
Sylvania
Technics
Techwood
Theta Digital
Toshiba
Tredex
Urban Concepts
XBox
Yamaha
Zenith
0490, 0534, 0682
0711, 0719, 0720, 0721
0651
0798
0503, 0675
0782
0539
0522
0717
0521
0717
0826
0503, 0627
0651
0490, 0632, 1362, 1462, 1490
0503, 0539, 0646, 0854
0525, 0571, 0632
0539
0674
0522
0522, 0571, 0717, 1022
0623
0823
0698
0573, 0820
0695
0670
0630
0633
0533
0533
0675, 0821
0490
0692
0571
0503, 0695, 1045
0799, 0800, 0803, 0804
0503
0522
0490, 0539, 0545, 0817
0503, 0591
Setup Codes For DVD Player/VCR Combos
Go Video
Hitachi
JVC
0715
0664 (for VCR use 0000)
0867
continued on next page...
21
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 22
MANUFACTURER’S CODES
Setup Codes For DVD Player/VCR Combos
(continued)
Samsung
Sansui
Sharp
Sylvania
Toshiba
0820
0695
0630 (for VCR use 0848)
0675 (for VCR use 0000)
0503
Setup Codes For PVRs
Keen
Panasonic
Philips
ReplayTV
Sonic Blue
Sony
Tivo
0693
0616
0618
0614, 0616
0614, 0616
0636
0618, 0636
Setup Codes For PVR/Satellite Receiver Combos
Echostar
Expressvu
Hughes
Hyundai
Philips
Proscan
RCA
Sony
0775, 1005, 1170
0775
1142
1011
1142
0392
0392, 1107
0639
Setup Codes For Satellite Receivers
AlphaStar
Chaparral
Crossdigital
DishPro
Echostar
Expressvu
GE
GOI
General Instrument
HTS
Hitachi
Hughes Network Systems
Hyundai
JVC
Magnavox
0772
0216
1109
1005, 0775
1005, 0775, 1170
0775
0566
0775
0869
0775
0819
1142, 0749, 1749
1011
0775
0724, 0722
22
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 23
Memorex
Mitsubishi
Motorola
Next Level
Panasonic
Paysat
Philips
Proscan
RCA
RadioShack
SKY
Samsung
Sony
Star Choice
Toshiba
Uniden
Zenith
0724
0749
0869
0869
0247, 0701
0724
1142, 0749, 0724, 1076, 0722, 1749
0392
0392, 0566, 0855, 0143, 1107
0869
0856
1109
0639, 1639
0869
0749, 0790, 1749
0724, 0722
0856, 1856
Setup Codes For TVs
A-Mark
AOC
Abex
Admiral
Advent
Adventura
Aiko
Aiwa
Akai
Alaron
Ambassador
America Action
Anam
Apex Digital
Archer
Audiovox
Baysonic
Belcor
Bell & Howell
Bradford
Brockwood
Broksonic
CXC
Candle
Carnivale
Carver
Celebrity
0003
0030, 0019, 0003, 0185
0032
0093, 0463
0761
0046
0092
0701
0030
0179
0177
0180
0180
0748, 0765, 0767
0003
0451, 0180, 0003, 0092, 0623
0180
0019
0154, 0016
0180
0019
0236, 0463, 0003
0180
0030, 0056, 0046, 0186
0030
0054
0000
continued on next page...
23
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 24
MANUFACTURER’S CODES
Setup Codes For TVs (continued)
Changhong
Cineral
Citizen
Clairtone
Concerto
Contec
Craig
Crosley
Crown
Curtis Mathes
Daewoo
Daytron
Denon
Dumont
Dwin
Electroband
Electrohome
Emerson
Envision
Fisher
Fujitsu
Funai
Futuretech
GE
Gibralter
GoldStar
Gradiente
Grunpy
Haier
Hallmark
Harley Davidson
Harman/Kardon
Harvard
Havermy
Hitachi
Infinity
Inteq
JBL
JCB
JVC
Janeil
KEC
0765
0451, 0092
0060, 0030, 0056, 0039, 0046, 0092, 0186, 0280
0185
0056
0180, 0157, 0185
0180
0054
0180, 0039
0047, 0054, 0154, 0451, 0093, 0060, 0030, 0145,
0056, 0016, 0039, 0166, 0702, 0747, 1147, 1347
0451, 0019, 0039, 0092, 0623
0019
0145
0017, 0019
0774
0000, 0185
0381
0154, 0236, 0463, 0180, 0282, 0178, 0019, 0179,
0039, 0038, 0177, 0185, 0280, 0623
0030
0154
0179, 0683
0180, 0179, 0171
0180
0047, 0051, 0451, 0282, 0178, 0021, 0027, 0747,
1147, 1347
0017, 0030, 0019
0030, 0178, 0019, 0001, 0032
0053, 0056
0180, 0179
0768
0178
0179
0054
0180
0093
0145, 0056, 0016, 0032, 0038, 0151
0054
0017
0054
0000
0053
0046
0180
24
IMPK6VR manual 1.0
2/21/03
5:46 PM
KTV
Kenwood
Kloss
Konka
LG
LXI
Logik
Luxman
MEI
MGA
MTC
Magnavox
Majestic
Marantz
Matsushita
Megatron
Memorex
Mercury
Midland
Minutz
Mitsubishi
Motorola
Multitech
NAD
NEC
NTC
Nikko
Noshi
Onwa
Optimus
Optonica
Orion
Panasonic
Penney
Philco
Philips
Pilot
Pioneer
Portland
Princeton
Prism
Proscan
Proton
Pulsar
Quasar
Page 25
0180, 0030, 0039, 0185, 0280
0030, 0019
0024, 0046
0628, 0632, 0638, 0703, 0707
0056
0047, 0054, 0154, 0156, 0178, 0747
0016
0056
0185
0150, 0030, 0178, 0019
0060, 0030, 0019, 0056, 0185
0054, 0030, 0179, 0024, 0186, 0187, 0386, 1254,
1454
0016
0054, 0030
0250
0178, 0145, 0003
0154, 0250, 0463, 0150, 0178, 0179, 0016
0001
0047, 0017, 0051, 0039, 0032, 0747
0021
0093, 0150, 0178, 0019
0093
0180
0156, 0178, 0166
0030, 0019, 0056, 0497
0092
0030, 0178, 0092
0018
0180
0154, 0250, 0166
0093, 0165
0236, 0463, 0179
0250, 0051
0047, 0156, 0051, 0060, 0030, 0178, 0021, 0019,
0018, 0039, 0003, 0027, 0032, 0747, 1347
0054, 0463, 0030, 0145, 0019
0054, 1454
0030, 0019, 0039
0038, 0166, 0679
0019, 0039, 0092
0717
0051
0047, 0747
0178, 0003
0017, 0019
0250, 0051, 0165
continued on next page...
25
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 26
MANUFACTURER’S CODES
Setup Codes For TVs (continued)
RCA
RadioShack
Realistic
Rhapsody
Runco
SSS
Sampo
Samsung
Samsux
Sansei
Sansui
Sanyo
Scimitsu
Scotch
Scott
Sears
Semivox
Semp
Sharp
Shogun
Signature
Simpson
Sony
Soundesign
Spectricon
Squareview
Starlite
Supre-Macy
Supreme
Sylvania
Symphonic
TMK
TNCi
Tandy
Tatung
Technics
Technol Ace
Techwood
Teknika
Telefunken
0047, 0019, 0018, 0038, 0090, 0679, 0747, 1047,
1147, 1247, 1347, 1447, 1547
0047, 0154, 0165, 0180, 0030, 0178, 0019, 0056,
0039, 0032, 0747
0154, 0165, 0180, 0030, 0178, 0019, 0056, 0039,
0032
0185
0017, 0030, 0497, 0603
0180, 0019
0030, 0039, 0032
0060, 0030, 0178, 0019, 0056, 0032, 0702, 0766
0039
0451
0463
0154
0019
0178
0236, 0180, 0178, 0019, 0179
0047, 0054, 0154, 0156, 0178, 0179, 0056, 0171,
0747
0180
0156
0093, 0165, 0039, 0157, 0386, 0688, 0689
0019
0016
0186, 0187
0000, 0080, 0111, 1100
0180, 0178, 0179, 0186
0003
0171
0180
0046
0000
0054, 0030, 0171, 0381
0180, 0171
0178, 0056, 0177
0017
0093
0003
0250, 0051
0179
0051, 0056, 0003
0054, 0180, 0150, 0060, 0019, 0179, 0056, 0016,
0039, 0092, 0186
0056, 0702
26
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 27
Toshiba
Tosonic
Totevision
Trical
Universal
Vector Research
Victor
Vidikron
Vidtech
Viking
Wards
Waycon
White Westinghouse
Yamaha
Zenith
Zonda
0154, 0156, 0060, 1256
0185
0039
0157
0027
0030
0053
0054
0178, 0019
0046
0054, 0165, 0030, 0178, 0021, 0019, 0179, 0056,
0016, 0027, 0080, 0111
0156
0463, 0623
0030, 0019, 0769
0017, 0463, 0016, 0092
0003
Setup Codes For TV/DVD Player Combos
Broksonic
Konka
Panasonic
Philips
RCA
Sharp
Sylvania
Toshiba
0695
0719, 0720
1362, 1462
0854
1022
0630
0821
0695
Setup Codes For TV/VCR Combos
Broksonic
Citizen
Colt
Curtis Mathes
Daewoo
Emerson
Funai
GE
GoldStar
Harley Davidson
Hitachi
Lloyd’s
Magnasonic
Magnavox
Magnin
Memorex
0002, 1479
0278, 1278
0072
1035
1278
0002, 1278, 1479
0000
1035, 0240, 0807, 1060
1237
0000
0000
0000
0278, 1278
0000, 1781
0240
0037, 0454, 1037, 1162, 1237, 1262
continued on next page...
27
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 28
MANUFACTURER’S CODES
Setup Codes For TV/VCR Combos (continued)
MGA
Mitsubishi
Optimus
Orion
Panasonic
Penney
Quasar
RadioShack
RCA
Sansui
Sanyo
Sears
Sharp
Sony
Sylvania
Symphonic
Thomas
Toshiba
White Westinghouse
Zenith
0240
0807
0454, 1162, 1262
0002, 1479
1035, 1162, 1262
0240, 1035, 1237
1035, 1162
1037
0807, 0240, 1035, 1060
0000, 1479
0240
0000, 1237
0807
0000, 1232
1781
0000
0000
0845
1278
0000, 1479
Setup Codes For VCRs
Admiral
Adventura
Aiko
Aiwa
Akai
America Action
American High
Asha
Audiovox
Beaumark
Bell & Howell
Broksonic
CCE
Calix
Canon
Carver
Cineral
Citizen
Colt
Craig
Curtis Mathes
Cybernex
0048, 0209
0000
0278
0037, 0000
0041
0278
0035
0240
0037, 0278
0240
0104
184, 0121, 0209, 0002, 0479, 1479
0072, 0278
0037
0035
0081
0278
0037, 0278, 1278
0072
0037, 0047, 0240, 0072
0060, 0035, 0162, 0041, 0760, 1035
0240
28
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 29
Daewoo
Denon
Dynatech
Electrohome
Electrophonic
Emerex
Emerson
0045, 0278, 1278
0042
0000
0037
0037
0032
0037, 0184, 0000, 0121, 0043, 0209, 0002, 0278,
0479, 1278, 1479
Fisher
0047, 0104
Fuji
0035, 0033
Funai
0000
GE
0060, 0035, 0240, 0760, 0807, 1035, 1060
Garrard
0000
Go Video
0432
GoldStar
0037, 0038, 1237
Gradiente
0000
HI-Q
0047
Harley Davidson
0000
Harman/Kardon
0081, 0038
Harwood
0072
Hitachi
0000, 0042, 0041
Hughes Network Systems 0042
JVC
0067, 0041
Jensen
0041
KEC
0037, 0278
KLH
0072
Keen
0693
Kenwood
0067, 0041, 0038
Kodak
0035, 0037
LXI
0037
Lloyd’s
0000
Logik
0072
MEI
0035
MGA
0240, 0043
MGN Technology
0240
MTC
0240, 0000
Magnasonic
1278
Magnavox
0035, 0039, 0081, 0000, 0563, 1781
Magnin
0240
Marantz
0035, 0081
Marta
0037
Matsushita
0035, 0162, 0454
Memorex
0035, 0162, 0037, 0048, 0039, 0047, 0240, 0000,
0104, 0209, 0454, 0479, 1037, 1162, 1237, 1262
Minolta
0042
Mitsubishi
0067, 0043, 0807
Motorola
0035, 0048
continued on next page...
29
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 30
MANUFACTURER’S CODES
Setup Codes For VCRs (continued)
Multitech
NEC
Nikko
Noblex
Olympus
Optimus
Orion
Panasonic
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Polk Audio
Profitronic
Proscan
Protec
Pulsar
Quasar
RCA
RadioShack
Radix
Randex
Realistic
ReplayTV
Runco
STS
Samsung
Sanky
Sansui
Sanyo
Scott
Sears
Semp
Sharp
Shintom
Shogun
Singer
Sonic Blue
Sony
Sylvania
Symphonic
0000, 0072
0104, 0067, 0041, 0038
0037
0240
0035
1062, 0162, 0037, 0048, 0104, 0432, 0454, 1048,
1162, 1262
0184, 0209, 0002, 0479, 1479
1062, 0035, 0162, 0225, 0454, 0616, 1035, 1162,
1262
0035, 0037, 0240, 0042, 0038, 1035, 1237
0042
0035, 0209, 0479
0035, 0081, 0618, 0749, 1081, 1181
0037
0067
0081
0240
0060, 0760, 1060
0072
0039
0035, 0162, 0454, 1035, 1162
0060, 0240, 0042, 0760, 0807, 1035, 1060
0000, 1037
0037
0037
0035, 0037, 0048, 0047, 0000, 0104
0614, 0616
0039
0042
0240, 0045
0048, 0039
0000, 0067, 0209, 0041, 0479, 1479
0047, 0240, 0104
0184, 0045, 0121, 0043
0035, 0037, 0047, 0000, 0042, 0104, 1237
0045
0048, 0807, 0848
0072
0240
0072
0614, 0616
0035, 0032, 0000, 0033, 0636, 1032, 1232
0035, 0081, 0000, 0043, 1781
0000
30
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 31
TMK
Tatung
Teac
Technics
Teknika
Thomas
Tivo
Toshiba
Totevision
Unitech
Vector
Vector Research
Video Concepts
Videomagic
Videosonic
Villain
Wards
White Westinghouse
XR-1000
Yamaha
Zenith
0240
0041
0000, 0041
0035, 0162
0035, 0037, 0000
0000
0618, 0636
0045, 0043, 0845
0037, 0240
0240
0045
0038
0045
0037
0240
0000
0060, 0035, 0048, 0047, 0081, 0240, 0000, 0042,
0072, 0760
0209, 0072, 1278
0035, 0000, 0072
0038
0039, 0000, 0209, 0033, 0479, 1479
TROUBLESHOOTING
PROBLEM:
LED (red light) does not blink when you
press a key.
SOLUTION: Replace batteries with two new AA
alkaline batteries.
PROBLEM:
LED blinks when you press a key, but
home entertainment device does not
respond.
SOLUTION: Make sure the remote control is aimed at
your home entertainment device and is
not farther than 15 feet away.
PROBLEM:
The unit does not control home entertainment devices or commands are not
working properly.
SOLUTION: Try all listed codes for the device brands
being set up. Make sure they can be
operated with an infrared remote control.
continued on next page...
31
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 32
TROUBLESHOOTING (continued)
PROBLEM:
DVD/VCR Combo does not respond
properly.
SOLUTION: Use the VCR codes for your brand. Some
combo units may require both a DVD
code and a VCR code for full operation.
PROBLEM:
Changing channels does not work
properly.
SOLUTION: If the original remote control required
pressing ENTER to change channels,
then press ENTER on the remote control
after entering the channel number.
PROBLEM:
Tried Search For Your Code method and
still could not find a working code.
SOLUTION: Clear the device key as follows: Press and
hold SET until the LED (red light) blinks
twice, then release. Next enter 9 - 9 - 2.
Then press the device key to be cleared
twice. Now repeat the Search For Your
Code method on page 11.
PROBLEM:
Remote control does not turn on Sony or
Sharp TV/VCR Combo.
SOLUTION: For power on, these products require
programming TV codes. For Sony, use
TV code 0000 and VCR code 0032. For
Sharp, use TV code 0093 and VCR code
0048.
PROBLEM:
CH+ and CH- do not work for your
RCA TV.
SOLUTION: Due to RCA design (1983-1987), only the
original remote control will operate these
functions.
PROBLEM:
No remote control of volume.
SOLUTION: See Changing Volume Lock on page 16 to
lock/unlock volume.
32
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 33
ABOUT UPGRADING
The One For All 6-Device PVR Universal Remote
Control has the largest infrared code library available.
However, if you purchase a brand new home entertainment device, it may not respond to the codes stored in
the remote control’s memory.
If this happens, please contact our Customer Support
department (see Customer Support on the next page)
to upgrade the remote control. The Customer Support
representative will search our entire database for a code
that matches your device and instruct you how to enter
it into your One For All 6-Device PVR Universal
Remote Control.
If the code for your home entertainment or home
automation device is not in our database, we will need
to “capture” the code for that device from its original
remote control. A new code would then be created and
need to be entered into your One For All 6-Device PVR
Universal Remote Control. If necessary, the Customer
Support representative can instruct you how to begin
the capture procedure.
NOTE: One For All reserves the right to replace a returned
remote control with a new one of equal or superior functionality.
Upgrade Exclusions
• Home entertainment devices controlled by radio
frequency (RF/UHF), wired, or ultrasonic remote
controls. Only devices controlled by infrared remote
controls are covered.
• Home entertainment devices not controlled by
remote controls.
• Broken or defective product.
• Products that operate over 100 kHz.
• Infrared keyboards and infrared pointing devices
(such as mouse substitutes).
• All products for sale and/or use outside the continental
United States,Hawaii,Alaska,or Canada.
33
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 34
CUSTOMER SUPPORT
For assistance, please contact us in any of the
following ways:
• E-mail: ofasupport@ueic.com
• Internet: http://www.oneforall.com
• Consumer Help Line: (330) 405-8615
INSTRUCTIONS TO THE USER
This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide a reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiated radio frequency
energy and if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet or a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help
34
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 35
LIMITED WARRANTY
One For All (“OFA”) warrants, to the original purchaser
only, that this product will be free from defects in
materials and workmanship, under normal use, for
ninety (90) days from the date of original purchase.
This warranty does not cover damage or failures
caused by products or services not supplied by OFA,
or which result from accident, misuse, abuse, neglect,
mishandling, misapplication, faulty installation,
set-up adjustment, improper maintenance, alteration,
maladjustment of consumer controls, modifications,
commercial use, or that is attributable to acts of God.
There are no express warranties except as listed above.
OFA SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT OR ARISING OUT OF
ANY BREACH OF WARRANTY.ALL EXPRESS AND
IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-ABILITY AND FITNESS
FOR A PARTICULAR PURPOSE,ARE LIMITED TO
THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, or limitations on
how long an implied warranty lasts, so the above
exclusions or limitations may not apply to you. This
warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
To obtain warranty service for a defective product
during the warranty period, please return the product,
preferably in the original carton, along with your
purchase receipt, to the store of original purchase.
A note detailing the complaint would be helpful. The
store, at its option, will replace or repair this product if
found to be defective.
One For All: (330) 405-8655
URC-6131
Feb. 2003
35
IMPK6VR manual 1.0
2/21/03
5:46 PM
Page 36
ADDITIONAL INFORMATION
As you update your home entertainment system, One
For All® has a universal remote control that will fit your
needs. Look for these exciting products at a retailer
near you.
One For All Access 3 . . . . . . . . . . . . . . . . . . . . . URC-3605
One For All Big Easy 3-Device. . . . . . . . . . . . . URC-3300
One For All Video Expert 4-Device . . . . . . . . . URC-4041
One For All Big Easy 4-Device. . . . . . . . . . . . . URC-4330
One For All Access 4 . . . . . . . . . . . . . . . . . . . . . URC-4605
One For All Access 5 . . . . . . . . . . . . . . . . . . . . . URC-5705
One For All PVR 6-Device . . . . . . . . . . . . . . . . URC-6131
One For All 6-Device Home Theater. . . . . . . . URC-6011
One For All 8-Device Home Theater. . . . . . . . URC-8011
One For All 8L-Device Home Theater
With Learning . . . . . . . . . . . . . . . . . . . . . . . . . . URC-8811
One For All A/V LCD 8 Device
With Learning . . . . . . . . . . . . . . . . . . . . . . . . . . URC-8910
One For All IR/RF LCD 8 Device
With Learning . . . . . . . . . . . . . . . . . . . . . . . . . . URC-9910
One For All 8 Device Home Theater Remote
Powered By Kameleon . . . . . . . . . . . . . . . . . . . URC-9960
ONE FOR ALL® is the registered trademark of
Universal Electronics Inc. Computime International
Ltd. is the Licensee of the ONE FOR ALL® brand for
USA and Canada.
Copyright 2003 by Universal Electronics Inc. No part
of this publication may be reproduced, transmitted,
transcribed, stored in any retrieval system, or translated
to any language, in any form or by any means, electronic,
mechanical, magnetic, optical, manual, or otherwise,
without the prior written permission of Universal
Electronics Inc.
The One For All® 6-Device PVR Universal Remote
Control is compatible for use in North America,
excluding Mexico.