Model No.: MF8120
1
Congratulations on purchasing the ZiiSound D3x, the modular
wireless speaker system that you will ever need. Get ready to
experience a whole new definition of audio nirvana with one
or more D3x or DSx wireless subwoofer linked together for
dynamics rivalling the very best in home audio set-ups.
Additional ZiiSound D3x and ZiiSound DSx shown here and throughout the user
manual are for illustration purposes only. Sold separately. Not included.
1
EN
For detailed product information, instructions or
to find out more about our speakers, visit
www.creative.com/speakers
Safety Instruction
Please read the following before using the Creative Products:
• Use a mains plug that is appropriate for your country or region.
• To be completely disconnected from the power input, the mains plug has to be disconnected
/detached from the mains.
• Disconnect the mains plug when the device is expected to be unused for several days.
Additional guidelines for wireless devices
• The short wave radio frequency signals of a wireless device may impair the operation of other
electronic and medical devices
• Switch off the device where it is prohibited. Do not use the device in medical facilities, aircraft,
refueling points, close to automatic doors, automatic fire alarms or other automatically controlled
devices
• Keep this device at least 20 cm from pacemakers and other medical devices. Radio waves may
impair the operation of pacemakers and other medical devices
2
Technical Specifications
• Bluetooth® Version : Bluetooth 2.1 + EDR (Enhanced Data Rate)
• Bluetooth Operating Frequency : 2402 - 2480 MHz
• Supported Bluetooth profiles* : A2DP (Wireless Stereo Bluetooth)
: AVRCP (Bluetooth Remote Control)
: Up to 10 meters (Measured in open space.
• Operating Range for Bluetooth Walls and structures may affect range of device.)
• Operating Range for Wireless Link
: Up to 30 meters (Measured in open space.
Walls and structures may affect range of device.)
• Wireless Link Operating Frequency
: 5725 – 5850 MHz
• Device Operating Temperature range
: 0ºC to 45ºC
• Power Adapter Operating Temperature range : 0ºC to 40ºC
These specifications apply to the ZiiSound D3x operating from the supplied 14V DC 1.9A universal
power adapter.
Note: Compliance markings are located on the bottom of this product.
Compatibility Disclaimer
• Wireless performance is dependent on your device’s Bluetooth wireless technology. Refer to your
device manufacturer’s manual.
• Every electronic device is subjected to radio frequency (RF) interference from external sources.
These include the connection between linked ZiiSound D3x and ZiiSound DSx wireless subwoofer.
• Creative will not be liable for any loss of data or leakage resulting from the use of these devices.
Notes
* Refer to your Bluetooth device (notebook1, PC1, mobile device2) manufacturer’s documentation
/website for supported profiles.
Compatible with PC (Windows XP/Vista/7), Apple Macintosh computers equipped with Bluetooth wireless stereo
Compatible with most major brands of Bluetooth A2DP enabled mobile phones. (including iPhone3, Windows
Mobile)
3
Original iPhone built in Bluetooth not supported
1
2
3
Section 1 : D3x Basic operations
1.1 Product Overview / Connectivity Diagram
1
2
1
5
4
3
Pairing
Bluetooth Connected
Rapid blinking LED
Steady Lit
CONNECT LED Status Indicator
2
CONNECT Button
For various Bluetooth Pairing activities
3
LINK Button
For various speakers linking activities
4
LINK LED Status Indicator
(Slave) Left Speaker
L
C
R
(Slave/Master*) Center Speaker
L
C
R
(Master) Right Speaker
L
C
R
Link discoverable mode
Rapid blinking LED
5
Volume Button and Volume Led Status Indicator
* For a 1.1 setup, the ZiiSound D3x will light up the Center Speaker LED to indicate it is connected in a 1.1 setup.
4
Push the plug in
fully and ensure
the plug snaps
into place
Press button
to detach
the plug
6
9
7
8
6
Bass Port Tube
7
AUX - IN
8
Power ON / Standby Button
9
DC –IN*
* All LEDs will light up for a few seconds when the mains are applied to the D3x. This is normal.
5
1.2 Enjoy audio from Stereo Bluetooth devices
Enjoy your favourite music from other Bluetooth devices by following these steps to connect them.
Pairing
Rapid blinking LED
A Ensure the speaker is powered ON. Press and hold the “CONNECT Button” for 5 seconds. Release
when the CONNECT LED blinks once.
i.
ii.
Connectivity
Bluetooth
Network
Connections
Operator
Internet
USB
ON
iii.
iv.
Connectivity
ZiiSound D3x
ZiiSound D3x
Search results
PASSCODE
CONNECTED
ZiiSound D3x
0000
B i) Turn on the Bluetooth feature on your device
ii) Search for ZiiSound D3x#
iii)Pair and connect to ZiiSound D3x#, if prompted for passcode, enter 0000.
iv) Pairing successful, ready to stream music
Note: The above are generic steps to pair a Bluetooth device, for more specific instruction on Bluetooth connectivity for your device,
please consult your manufacturer’s manual.
# When pairing a Bluetooth device to a Linked speaker system in 1.1, 2.1 or 3.1 configuration,
the Linked speaker system will appear as “ZiiSound D3x System”
6
1.3 Switching between paired devices
Enjoy your favourite music from another paired Bluetooth device by following these steps to establish
the connection.
Action
LED status
Status
_
_
Ensure that the next
previously paired device has
Bluetooth powered on and
ready to accept connection
Press “CONNECT Button” once
CONNECT LED blinks and
stays lit
Bluetooth connection
switches. Ready to stream
music.
Section 2 : Linking with another ZiiSound D3x or DSx Wireless subwoofer
2.1 Adding a subwoofer to the D3x to form a 1.1 speaker system
A Note: It is neccessary to clear the memory of linked speakers (all D3x(s) and DSx) should you
require to configure a new setup. (For example, adding another D3x or DSx)
Proceed to Step (B) if your D3x or DSx have not been linked with other speaker before.
If your D3x or DSx have been linked before, follow the instruction below to clear link system
memory to reconfigure a new speaker setup.
For the D3x(s)
Ensure the speaker is in standby mode. Press and hold the Power ON/Standby button located at
the rear of the speaker until LINK and CONNECT LED blinks 2 times and goes off. The D3x Link
memory has been cleared.
For the DSx
Press and hold the LINK Button located at the rear of the subwoofer for 10 seconds until the Link
LED blinks 2 times and goes off. The DSx Link memory has been cleared.
7
Link discoverable mode
Rapid blinking LED
B Ensure your ZiiSound D3x is powered ON.
Press and hold the LINK Button for 5 seconds and release when the Link LED blinks once.
The D3x is now in Link discoverable mode.
Link discoverable mode
Rapid blinking LED
C Activate LINK discoverable mode on the ZiiSound DSx wireless subwoofer by holding the Link
button for 4 seconds and releasing when the Link LED blinks once. For more details, refer to the
ZiiSound DSx manual.
Linked Wireless Subwoofer
LED Steady
D The ZiiSound DSx are linked when the LED status indicator on the DSx are Lit Steady.
8
Link discoverable mode
L
C
R
Rapid blinking LED
L
C
R
L
C
R
L
C
R
L
C
R
Linked mode with Wireless Subwoofer
L
C
R
LED Steady
E
L
C
R
If the ZiiSound D3x LINK LED is still Rapidly Blinking, Press the LINK Button once to stop or wait
for it to timeout. Link establishment complete. Ready to Stream music.
9
2.2 Adding one or more ZiiSound D3x and DSx wireless subwoofer
to form a 2.1 or 3.1 speaker system
A Note: It is neccessary to clear the memory of linked speakers (all D3x(s) and DSx) should you
require to configure a new setup. (For example, adding another D3x or DSx)
Proceed to Step (B) if your D3x or DSx have not been linked with other speaker before.
If your D3x or DSx have been linked before, follow the instruction below to clear link system
memory to reconfigure a new speaker setup.
For the D3x(s)
Ensure the speaker is in standby mode. Press and hold the Power ON/Standby button located at
the rear of the speaker until LINK and CONNECT LED blinks 2 times and goes off. The D3x Link
memory has been cleared.
For the DSx
Press and hold the LINK Button located at the rear of the subwoofer for 10 seconds until the Link
LED blinks 2 times and goes off. The DSx Link memory has been cleared.
Link discoverable mode
Rapid blinking LED
B Pick one ZiiSound D3x as your master speaker and ensure it is powered ON.
Press and hold the LINK Button for 5 seconds and release when the LINK LED blinks once.
The D3x is now in LINK discoverable mode and will be your RIGHT Channel Speaker.
10
Link discoverable mode
allocated CENTER Channel
LED Off
Rapid blinking
Link discoverable mode
LED Steady
LED Off
allocated LEFT Channel
LED Steady
Rapid blinking
D3x Right
Master speaker
C Power ON another D3x. Press and hold the LINK Button for 5 seconds and release when the LINK
LED blinks once. The LINK LED will blink until it stays lit up to indicate which channel the speaker
is linked for, Repeat for another D3x to form a 3.1 setup.
The Speakers will automatically be allocated as LEFT, then CENTER channels by order of the activation of their Link Discoverable mode.
Note:
•
Whenever a new speaker is added to the RIGHT Channel Master speaker, the LINK discoverable mode for the Master speaker
extends for another 1 minute for other speakers to link in.
•
To cancel Link discoverable mode, press the LINK Button once while the speakers / Subwoofer are still in Link discoverable
mode.
11
Link Connected (Center Channel)
LED Steady
D3x CENTER
allocated speaker
Link Connected (LEFT Channel)
Link discoverable mode
LED Steady
Rapid blinking LED
D3x LEFT
allocated speaker
D3x RIGHT
Master speaker
D LEFT and CENTER speakers are Linked when the LINK LED Status indicator of the LEFT and
CENTER channel speakers shows their respective LEFT and CENTER LED Lit on its LINK LED.
12
Link discoverable mode
Rapid blinking LED
E Jump to step G should no wireless subwoofer are required to be linked.
Set the ZiiSound DSx wireless subwoofer to LINK Discoverable mode by holding the Link button for 4
second and releasing when the LINK LED blinks once. For detailed instructions, refer to the ZiiSound
DSx User manual. The Master D3x speaker will automatically connect the DSx wireless subwoofer while
the D3x LINK LED is still rapidly blinking. Linked Wireless Subwoofer
LED Steady
F The ZiiSound DSx are linked when the LED status indicator on the DSx are Lit Steady.
Link discoverable mode
Linked Right Master Speaker
Rapid blinking LED
LED Steady
D3x RIGHT
Master speaker
D3x RIGHT
Master speaker
G If the ZiiSound D3x (Right Channel) Master speaker LINK LED is still Rapidly Blinking, Press the
LINK Button once to stop or wait for it to timeout. The speakers are now in Multi Channel mode.
Link establishment complete. Ready to Stream music.
Note:
1) The Link feature on this D3x is only compatible with other ZiiSound D3x speakers and ZiiSound DSx wireless subwoofer.
2) Volume control, AUX-IN, CONNECT and Volume Button operations are not available for the LEFT and CENTER Channels when the
LINK is active.
13
Section 3 : Switching between Multi-Channel and PARTY mode
3.1 To engage PARTY Mode
In PARTY mode, each individual speaker will broadcast its LEFT, RIGHT channels information from the
RIGHT Master speaker. This switching feature can only be performed on the RIGHT Master speaker
when in MULTI-CHANNEL mode.
ZiiSound D3x
CENTER Linked Speaker
(Multi-Channel mode)
C
C
L
L
ZiiSound D3x
LEFT Linked Speaker
(Multi-Channel mode)
R
R
ZiiSound D3x
RIGHT Linked Speaker
(Multi-Channel mode)
A Press and hold the LINK Button for 5 seconds and release when the LINK LED blinks once on the
RIGHT Master speaker. Now all LED on the LINK LED status indicator will light up, indicating they
are in PARTY mode configuration.
ZiiSound D3x
CENTER Linked Speaker
(Party mode)
L
ZiiSound D3x
LEFT Linked Speaker
(Party mode)
R
L
R
L
R
ZiiSound D3x
RIGHT Linked Speaker
(Party mode)
14
3.2 To engage MULTI CHANNEL Mode
In MULTI-CHANNEL mode, each individual speaker will play only its allocated channel information (eg
LEFT, CENTER or RIGHT only) streamed from the RIGHT Master speaker. This switching feature can
only be performed on the RIGHT Master speaker when in PARTY mode.
ZiiSound D3x
CENTER Linked Speaker
(Party mode)
R
L
R
L
ZiiSound D3x
LEFT Linked Speaker
(Party mode)
R
L
ZiiSound D3x
RIGHT Linked Speaker
(Party mode)
A Press and hold the LINK Button for 5 seconds and release when the LINK LED blinks once on the
RIGHT Master speaker. Now all LED on the LINK LED status indicator will disappear, only displaying
their respective Channel LED indicator indicating they are in MULTI-CHANNEL mode.
ZiiSound D3x
CENTER Linked Speaker
(Multi-Channel mode)
L
ZiiSound D3x
LEFT Linked Speaker
(Multi-Channel mode)
C
C
L
R
R
ZiiSound D3x
RIGHT Linked Speaker
(Multi-Channel mode)
15
Section 4 : Other speaker features
4.1 Returning to standby and Powering ON the D3x with active Links
A Returning to Standby
The Linked speakers can be brought to Standby in unison by pressing the Power ON/Standby
Button located at the rear of the RIGHT Master speaker.
B
Powering ON with active links
The Linked speaker can be Powered ON with active links to each other by pressing the Power
ON/Standby Button of the RIGHT Master speaker with the mains powered ON on all the other
speakers.*
*Powering ON with active links can only be done on the Master speaker as the slave speakers are listening to instructions
from the Master speaker, even in standby.
4.2 Disabling / Restoring the link system for Standalone / Linked
speaker usage (only for 2.0 and above setup)
A Disabling the LINK for individual D3x operation
You can disable the LINK connection to all the linked speakers by simply pressing the LINK Button
once on the RIGHT Master speaker. This will bring down the LINK and restore the functions of the
AUX-IN, CONNECT and Volume Button, which locked in link mode, back to each individual D3x. Once
activated, there is no LED indication on the LINK LED status indicator for all D3x.
Multi-Channel mode
Standalone mode
Party mode
16
B Restoring LINK for linked speaker usage
To restore the LINK from the sets of individual speakers, you can Press the LINK Button once on
either any of the speakers with all other D3x(s) and subwoofer Powered ON**. This will result in
restoring the state of the speakers shown by it LED indication in either Multi-channel or Party
mode.
** For the ZiiSound D3x, Powered ON is indicated with the Volume LED Status Indicator lit up.
4.3 Reset to factory setting / clear LINK system
Follow these steps to return to factory settings all D3x(s) to clear Bluetooth paired device memory and
LINK system when a change of speaker configuration is required.
(For example, linking additional D3x or DSx)
Action
LED status
Status
CONNECT LED and LINK
LED blinks twice and
turns off. This indicates a
successful Factory reset.
Powered On. Speaker Bluetooth device list and Link
system memory cleared.
Ready for next user action
ZiiSound D3x
Return the speaker to Standby by pressing the
Power ON/ Standby button.
Press and hold Power button for 10 seconds.
Note: The above can also be applied to LEFT and CENTER speaker to clear Bluetooth paired device memory and Link configurations
should the need arise.
17
Section 5 : Tips, Tricks and FAQ
Perform the following trouble-shooting steps before sending it for servicing.
To download the user guide or find out more information about our product,
please refer to support.creative.com
5.1 Speaker FAQ
What are the indicators that indicate my ZiiSound D3x is Powered ON.
A For the master speaker, the Volume LED indicator are lit when the ZiiSound D3x is powered ON.
This is the best indication your speaker is Powered ON.
B For the other linked speakers, press and hold the Power ON/Standby button to initiate speaker
identification mode. This will indicate what channel mode the speaker is in.
Is there any power saving features from the ZiiSound D3x?
Yes, the RIGHT Master speaker will enter standby automatically after more than 10 minutes of zero
activity from both, the Bluetooth* and AUX-IN** sources. It will also instruct other speakers and
subwoofer linked to the RIGHT master speaker to enter standby to save power.
* Power saving mode only applicable when no Bluetooth connection is detected for 10 minutes.
** Power saving mode only applicable when there is no audio on the AUX-IN input.
5.2 Bluetooth FAQ
There’s no Bluetooth link between my device and the ZiiSound D3x. What should I do?
-
-
-
Delete the ZiiSound D3x or ZiiSound D3x System name entry from your Bluetooth device paired memory list and perform the steps in Section 1.2 (Enjoy audio from Stereo Bluetooth devices) to re-pair your device with ZiiSound D3x
Position them within 1 meter or closer to each other if you experience pairing difficulties
Ensure that both your Bluetooth device and ZiiSound D3x are not connected to any other devices
Bluetooth link is established and paired between the devices but there’s no music. What should I do?
With some built-in Bluetooth Stereo enabled computers, 3rd party USB Bluetooth dongles or other
devices, you may be required to manually specify/ setup the audio output as ZiiSound D3x, e.g.,
(under sound and audio devices section on your computer’s operating system) Please consult your
manufacturer’s documentation for further information
18
5.3 LINK Tips and Tricks
How to identify which speaker is the LEFT, CENTER, RIGHT speaker.
• Press and hold the Power ON/Standby button located at the rear of the speaker.
The Link LED indicator will light its respective LED Channel it was configured for.
Link LED Status
Indicator
(Slave)
Left Speaker
(Slave/Master*)
Center Speaker
(Master)
Right Speaker
Not Configured
My LEFT and CENTER Channel D3x does not respond to my actions on either buttons or Bluetooth
connections when they are in LINK mode.
• This is normal. The D3x in slave mode does not respond to any button (except the Power
ON/Standby to indicate the identity of the speaker via LED indication) as they are receiving
cues from the RIGHT Master speaker. This includes Bluetooth connection, AUX-IN input and
Volume control.
Can I add more speakers or remove speakers from a 2.1 Setup?
Yes you can. However you would need to clear the LINK system on all the speakers and subwoofer and
re-link them again. Please refer to section 4.3 Reset to factory setting / clear LINK System and section
2.1 or 2.2 to reconfigure your system again. For operations on the ZiiSound DSx wireless subwoofer,
please refer to its user manual for more information.
I cannot re-connect my speakers together. All that is shown is all the LEDs blinking in unison and
going off after 1 minute. What should I do?
This is an error indicator to indicate that one of the links are not present in the defined previous setup.
There are 2 ways to troubleshoot.
a)Power ON all your speakers and press the LINK Button again to attempt to link the speakers
together. Ensure that the Subwoofer have their mains Powered ON.
b)Return to factory default settings to clear LINK system configuration for all your speakers
and subwoofer involved and re-link them again.
19
European Compliance
This product conforms to the following:
EMC Directive 2004/108/EC.
Mains operated products for the European market comply
with Low Voltage Directive 2006/95/EC and Commission
Regulation(s) Implementing Directive (2005/32/EC).
Communication /RF wireless products for the European
market comply with R&TTE Directive 1999/5/EC.
CAUTION:
To comply with the Europe CE requirement, this device
must be installed with CE certified computer equipment
DECLARATION OF CONFORMITY
According to R&TTE Directive (1999/5/EC)
Company Name
:
Company Address :
which meet with Class B limits.
All cables used to connect this device must be shielded,
grounded and no longer than 3m in length. Operation with
non-certified computers or incorrect cables may results
in interference to other devices or undesired effects to the
product.
MODIFICATION:
Any changes or modifications not expressly approved by Creative
Technology Limited or one of its affiliated companies could void
the user’s warranty and guarantee rights.
Creative Technology Ltd
31, International Business Park
Creative Resource, Singapore 609921
Declare under our sole responsibility that the product(s):
Product Name
: ZiiSOUND D3x
Product Model Number
: MF8120
External Power Adapter Model Number : SRC14001900
Intended Use
: Office and Home Usage
Restrictive use
: Nil
To which this declaration relates are in conformity with the following standard(s):
Radio
:
EN 300 328 V1.7.1: 2006
EN 300 440-1 V1.6.1:2010
EN 300 440-2 V1.4.1:2010
EMI/EMC
: EN 55013:2001 +A1:2003 +A2:2006
EN 55020:2007
EN 55022: 2006 + A1: 2007
EN 61000-3-2:2006 + A1:2009 + A2:2009
EN 61000-3-3:2008
EN 301 489-1 V1.8.1: 2008
EN 301 489-3 V1.4.1: 2002
EN 301 489-17 V2.1.1: 2009
Health & Safety
: EN 60065: 2002 + A1: 2006 + A11: 2008 + IEC Guide 112
EN 62311: 2008
Energy Use
: Regulation (EC) No. 278/2009, Regulation (EC) No. 1275/2008
Supplementary Information:
• Notified Body Number 0890
• External Power supply unit is bundled with the product and not sold separately.
• The receiver portion of this product is a Category III device, as specified in EN 300 440.
Technical documentation for this product(s) is retained at the following address
Company Name
: Creative Technology Ltd
Company Address
: 31, International Business Park
Creative Resource, Singapore 609921
20
EN
Hereby, Creative Technology Ltd. declares that this wireless speaker is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
FR
Par le présent document, Creative Technology Ltd. déclare que ce haut-parleur sans fil est conforme aux
exigences essentielles et autres dispositions de la directive 1999/5/CE.
DE
Hiermit erklärt Creative Technology Ltd., dass dieser Wireless-Lautsprecher die grundlegenden Anforderungen
und weitere wichtige Bestimmungen der Richtlinie 1999/5/EG erfüllt.
IT
Creative Technology Ltd. dichiara che l’altoparlante wireless è conforme alle prescrizioni essenziali e alle
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
ES
Por la presente, Creative Technology Ltd, declara que este altavoz inalámbrico cumple con los requisitos
esenciales y otras cláusulas de la directiva 1999/5/EC.
NL
Creative Technology Ltd verklaart hierbij dat deze draadloze luidspreker voldoet aan de vereisten en andere
relevante voorwaarden van de richtlijn 1999/5/EG.
PT
A Creative Technology Ltd., declara pelo presente que esta coluna sem fios está em conformidade com os
requisitos essenciais e outras disposições relevantes da Directiva 1999/5/CE.
SV
Härmed intygar Creative Technology Ltd. att denna trådlösa högtalare uppfyller viktiga krav och bestämmelser
i EU-direktivet 1999/5/EG.
NO
Creative Technology Ltd. bekrefter med dette at denne trådløse høyttaleren overholder kravene og andre
relevante forskrifter i direktiv 1999/5/EF.
DA
Creative Technology Ltd. erklærer hermed, at denne trådløse højtaler overholder de obligatoriske krav samt
øvrige relevante bestemmelser i direktiv 1999/5/EF.
FI
Creative Technology Ltd ilmoittaa, että tämä langaton kaiutin vastaa direktiivin 1999/5/EY olennaisia vaatimuksia
ja muita ehtoja.
CZ
Společnost Creative Technology Ltd. prohlašuje, že tento bezdrátový reproduktor splňuje základní požadavky a
další související ustanovení nařízení 1999/5/EC.
PL
Firma Creative Technology Ltd. niniejszym oświadcza, że ten głośnik bezprzewodowy jest zgodny z podstawowymi
wymaganiami i innymi właściwymi postanowieniami dyrektywy 1999/5/WE.
RU
Настоящим компания Creative Technology Ltd. заявляет, что данный беспроводной динамик соответствует
необходимым требованиям и прочим применимым положениям Директивы 1999/5/EC.
HU
Ezennel a Creative Technology Ltd. kijelenti, hogy ez a vezeték nélküli hangszóró megfelel az alapvető
követelményeknek, valamint az 1999/5/EK számú irányelv egyéb vonatkozó elvárásainak
EL
Με το παρόν έντυπο, η Creative Technology Ltd, δηλώνει ότι αυτό το ασύρματο ηχείο συμμορφώνεται με τις
βασικές προδιαγραφές και τις λοιπές σχετικές προϋποθέσεις της οδηγίας 1999/5/EC.
LT
„Creative Technology Ltd.“ pareiškia, kad belaidis garsiakalbis atitinka esminius direktyvos 1999/5/EB reikalavimus
ir kitas atitinkamas jos nuostatas.
SK
Spoločnosť Creative Technology Ltd. týmto deklaruje, že tento bezdrôtový reproduktor je v súlade so základnými
požiadavkami a ostatnými relevantnými ustanoveniami Nariadenia 1999/5/EC.
21
© 2011 Creative Technology Ltd. All rights reserved. Creative, the Creative logo, Zii and ZiiSound are trademarks or registered
trademarks of Creative Technology Ltd in the United States and/or other countries. The Bluetooth® word mark and logo are
owned by the Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. apt-X is a registered
trademark of APT licensing Ltd. All other trademarks are the property of their respective owners and are hereby recognized
as such. All specifications are subject to change without notice. Actual product may differ slightly from images shown.
PN 02MF812000000 Rev A
22