Schrack Technik HELMUFF003 Connect and Branche sleeve 2-FO-shrink, 1x M25, 2x M20 Owner's Manual

Date: 17.12.2021
2 - FO
2 - FO
Mounting Instruction
Connect or branch-closure
Fiber Optic Closure for max. 48 Splices
2 - FO
1
Pcs
2
Pcs
PARTLIST
Closurebody with lid and rubber
with 2x M20 and 1x M25 Glands
Spliceholder (2x12 Shrink- or Crimp for 48 cores)
6
Pcs
Cable Ties
2
Pcs
sealing plugs: 1x M20, 1x M25
1
Pcs
Mounting key (per Carton)
1
Pcs
Mounting Instruction
1
Pcs
Alu-Pole mounting (alternative)
100 mm
Packing: 6 pieces / Box + 1 key for opening
1. Insert FO Cable-Ends through the cable glands from outside to inside
of both closure parts. Slide the closure parts away from
the splice area to have enough space to splice all fibers according to specs.
2. Prepare fiber ends for splicing, specify overlengths and store in splice tray.
Page 1
3. Place cableties over FO cable on both sides of splice tray
as strain relief (through the openings left and right outside
the splice area). Pull strongly!
4. In the same way put the second tray on the top of the other.
5. If it is necessary to use both sides of the slice-tray please push fibers
through the openings of the tray (middle left and middle right)
6. Make splices and protection according to splicing specifications.
2x6 tubes will be put on top of each other.
Alternativ: connect- or branch-closure
7. Put splice trays in the long closure part and screw the lid together with hand
strongly!
8. Closing the cable glands on the outside of the closure parts will seal
the closure and make the strain relief over all cable ends.
Usage:
Usually in the ground:
Special order:
Size of Cable Glands:
Cable Ø:
min.
max.
Force of the screw connection (ca):
Closures are tested according to specs for IP 68
colour resistant!
UV – durable (black)
M20
M25
7,0 mm
14,0 mm
5,0 Nm
11,0 mm
17,0 mm
8,5 Nm
Official Austrian Auth. Certification No.: VAEE 35298B
Page 2
">