VIG0,3-40
VIG0,5-65
Technische Alternative RT GmbH
A-3872 Amaliendorf, Langestr. 124
Tel +43 (0)2862 53635 [email protected]
Vers. 1.0 EN
Flowmeter VIG 0,3-40 / VIG 0,5-65
Image: VIG 0,3-40
b1
b2
Dimensions:
DN
VIG 0,3-40
VIG0,5-65
mm
Inch
Continuous flow
rate Q3
d mm
thread
15
20
R ½“
R ¾“
2.5 m³/h
4.0 m³/h
G ¾“
G 1“
b1 mm
meter
length
110
130
b2 mm c mm
f mm
kg weight
188
228
17
21
0.505
0.530
78
78
Monitoring data
VIG 0,3-40
VIG0,5-65
DN mm
Continuous flow rate
Q3 m³/h
Highest flow rate
Qmax m³/h
15
20
2,5
4.0
3.0
5.0
B class
Qt l/h
120
200
Qmin l/h
30
50
The flowmeters of the VIG series are generally used in conjunction with controllers of the
UVR or ESR series.
Installation: A straight pipe length of at least 20 cm upstream and downstream the sensor
(in horizontal as well as in vertical mounting position) must be used as a smoothing section.
Connection: If the VIG has a 3-pin cable, then the brown and white conductors are to be
connected to the controller; the green conductor remains unused. The polarity of the
connections ("earth") is interchangeable, hence need not be observed.
VIG 0,3-40
VIG 0,5-65
VIG 0,3-40
VIG 0,5-65
Pressure loss [bar]
Pressure loss curve
Flow [m³/h]
Error
[% full scale]
Error curve
Flow [m³/h]
Technical Datas:
Start value horizontal VIG 0,3-40: 12 l/h, VIG 0,5-65: 20 l/h
Start value vertical VIG 0,3-40: 20 l/h, VIG 0,5-65: 30 l/h
High resolution impulse output (one impulse per each 0.5l)
Temperature range: max. 90°C
Breaking capacity: max. 10mA, max. 28V DC
Protection: IP54
Subject to technical modifications
© 2017
">
