Digital Color + White Transfer Printer
Quick Start Guide
For detailed instructions, please refer to the Uninet IColor 800W Printer User Manual
and the Uninet IColor ProRIP User Manual
1. Remove the packing materials
and check the components
2. Remove orange tape
•
10 cm
(4.0")
Uninet IColor
ProRIP dongle
75 cm
(29.6")
From all sides
10 cm
(4.0")
68.5 cm
(27.0")
58.7 cm
(23.2")
55 cm
(21.7")
58.7 cm
(23.2")
Uninet IColor 800W
DRA201
3. Remove orange security tape and lock from inside printer
4. Connect the printer power cord and turn on.
1
2
5. The Uninet IColor 800W Digital Color + White Transfer Media Printer has one configuration
Printer Display Reads
Cyan low/out/empty
Magenta low/out/empty
Yellow low/out/empty
Black low/out/empty
Replace with
Cyan
Magenta
White
Yellow
WARNING
6. Install the Uninet IColor ProRIP (stored on the provided dongle)
•
Please disable/uninstall any Anti Virus software before installation of the UniNet ProRIP
Choose your language and follow the install steps
IColor ProRIP Setup
IColor ProRIP Setup
ProRIP
ProRIP
ProRIP
SetUp
Application Type. Choose either 32-bit or
64-bit application type. To Continue, select
Next.
IColor ProRIP Setup
InstallShield Wizard for IColor ProRIP
The InstallShield Wizard will install IColor ProRIP
on your computer. To Continue, select Next.
IColor ProRIP Setup
ProRIP
Production Workflow Software
IColor ProRIP setup
Choose Destination Location. Select folder
where setup will install files. To Continue,
select Next.
ProRIP
Production Workflow Software
Production Workflow Software
Production Workflow Software
IColor ProRIP Setup
Production Workflow Software
IColor ProRIP Setup
License Agreement
Please read the following license agreement
carefully. If you agree, Accept and select Next.
IColor ProRIP Setup
Installation Choices
Choose ‘Full install of iColor ProRIP’ and
select Next.
IColor ProRIP Setup
ProRIP
Production Workflow Software
IColor ProRIP setup
Select Program Folder. Please select a program
folder. Setup will add program icons to the
Program Folder listed below. You may type a new
folder name, or select one from the existing
folders list. Select Next to continue.
ProRIP
Production Workflow Software
IColor ProRIP Setup
Agree to license terms and select Install.
9. ProRIP opens, the Queue Wizard will begin the
installation of the support files for your IColor 800 printer
7. Uninet IColor ProRIP software
First time Setup
•
Ensure the ProRIP dongle
is inserted and you are
connected to the internet
(required)
•
Launch the software
•
Set unit of measure and
decimal places, then
select OK.
•
Select next
•
10. Select the IColor 800 printer
from the support menu and
select ‘OK’
11. Device package search
12. Select ‘Finish’ to complete
the installation
13. Uninet IColor ProRIP printer queue setup
•
Please continue for
software configuration
•
Select ‘Search’ for new printer package
•
Select ‘Next’ to continue the installation
– If connected by USB, choose the printer as identified
in the drop down
•
Open the IColor ProRIP
•
Select Queue/Manage Queues
•
Select the proper port from the ‘Port’ drop down menu.
* All other ports will update automatically,
it is only necessary to do this for one queue
– If connected via network (recommended),
choose TCP/IP.
ProRIP
Production Workflow Software
– Select ‘Close’
IColor ProRIP v2
14. Select the proper Print Queue for your project
A. Select your ‘Print Que’ and ‘Print Mode’
Select Install Printer
ProRIP
Production Workflow Software
IColor ProRIP v2
15. Import + print graphic
A. Three ways to import graphics
– The ‘Print Modes’ have preset values for white coverage, choke,
paper size, paper tray and mirror settings
– 1. Select the ‘green plus’ icon and
navigating to the proper folder.
– 2. Select File > Import File
These can be modified as needed
– 3. Simply dragging and dropping your file into the queue
ProRIP
Production Workflow Software
IColor ProRIP v2
ProRIP
Production Workflow Software
Print Queue
Print Mode
Selection
IColor ProRIP v2
B. Select the desired file
C. Select ‘Print’ icon in
the menu bar.
">
