Crestron | DM-RMC-100-C | DM-RMC-100-C - Digital Resources, Inc.

DM-RMC-100-C
DigitalMedia 8G+™ Receiver & Room Controller 100
The DM-RMC-100-C provides a simple one-box interface solution for a
single display device as part of a complete Crestron® DigitalMedia™
system. It functions as a DM 8G+ receiver and control interface,
providing a single HDMI® output along with Ethernet, RS-232, and IR
control ports. Its compact, low-profile design allows the DM-RMC-100-C
to be installed discreetly behind a flat panel display or above a
ceiling mounted projector. It connects to the head end or source
location using a single CAT5e or Crestron DM 8G™ cable.[1]
DigitalMedia 8G+™
As the leader in HDMI and control system technologies, Crestron
developed DigitalMedia to deliver the first complete HD AV
distribution system to take HDMI to a higher level. DigitalMedia
allows virtually any mix of AV sources to be distributed throughout
the home, office, school, or virtually any other facility.
DigitalMedia 8G+ breaks even further ground, providing a true one-wire
transport for moving high-definition video, audio, and Ethernet over
low-cost twisted-pair cable without any need for compression or
repeaters. Just one 8-conductor twisted-pair cable is required,
supporting distances up to 330 feet (100 m) using Crestron DM 8G Cable
or CAT5e.[1]
DigitalMedia thoughtfully manages all of the various AV signals and
devices in your system, matching each source's output to the
capabilities of the selected display(s). Every signal is preserved in
its native video resolution and audio format, ensuring a pure,
lossless signal path throughout.
Multimedia Display Interface
A single HDMI digital AV output port is provided on the DM-RMC-100-C,
supporting HDMI with HDCP, Deep Color and 3D, handling 1080p60 HDTV
with multi-channel HD lossless audio as well as WUXGA computer
resolutions — all through a single connection. The HDMI output
can also handle DVI signals using an appropriate adapter or interface
cable[2]. In addition, there are RS-232, IR, and Ethernet control
ports provided for controlling the display device and other equipment.
A single cable connects the DM-RMC-100-C to a DM® switcher or
transmitter, transporting video, audio, control, networking, and power
signals all through one simple RJ45 connection.[1,3] Multiple
DM-RMC-100-Cs may be installed to handle each display in a multi-room
distribution system, all fed from a central DM-MD series switcher. Or,
a single DM-RMC-100-C can be fed straight from a DM 8G+ transmitter,
affording a very simple solution for extending a computer or AV signal
to a single display.
LAN Connectivity
Along with high-definition AV and control, DigitalMedia also
integrates high-speed Ethernet networking for a total signal
distribution solution. The DM-RMC-100-C includes a 10/100 Ethernet
port, providing a convenient LAN connection for a local network
device.
Embedded Device Control
The primary objective of every Crestron system is to enable precisely
the control desired for a seamless user experience. The DM-RMC-100-C
includes built-in RS-232, IR, and Ethernet control ports to allow
programmable control of the display device connected to it. But, it
can also provide an alternative to these conventional control methods
by harnessing the CEC (Consumer Electronics Control) signal embedded
www.crestron.com
800.237.2041
in HDMI. Through its connection to the control system, the
DM-RMC-100-C provides a gateway for controlling the display device
right through the HDMI connection, potentially eliminating the need
for any dedicated control wires or IR probes.
Low-Profile Installation
The DM-RMC-100-C mounts conveniently to a wall, ceiling, or other flat
surface. At just one inch deep, it fits easily behind a flat panel
display or above a ceiling-mounted projector. All connections and LED
indicators are positioned on the sides, ensuring optimal access and
visibility for a clean, serviceable installation. An array of
indicators is provided for easy setup and troubleshooting.
Please refer to the DigitalMedia Resources Webpage at http://www.
crestron.com/dmresources/ for additional design tools and reference
documents.
> DigitalMedia 8G+™ receiver and display controller
> Low-profile surface mount design
> DM 8G+™ input supports up to 330 ft cable length[1]
> Provides one HDMI® or DVI display output[2]
> Handles HD video with Deep Color and 3D
> Enables device control via CEC, RS-232, IR, or Ethernet
> Can be powered via DM or a local power pack[3]
> Affords a true one-wire connection to a DM® switcher or
transmitter
> Provides a 10/100 Ethernet connection
> Allows quick, easy setup and diagnostics
DM-RMC-100-C
Note: May be powered via power pack or DM, not both.
SPECIFICATIONS
Video
Input Signal Type: DM 8G+ (DigitalMedia over one CAT5e twisted-pair
copper wire)[1]
Output Signal Types: HDMI®, DVI[2]
Formats: HDMI w/Deep Color & 3D, DVI, HDCP content protection support
Input Resolutions, Progressive: 640x480@60Hz, 720x480@60Hz (480p),
720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz,
854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz,
1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz,
1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz,
1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz,
1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz
(1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50),
1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz,
2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz
pixel clock
Input Resolutions, Interlaced: 720x480@30Hz (480i), 720x576@25Hz (576i),
1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other
resolution allowed by HDMI up to 165MHz pixel clock
Output Resolutions: Matched to input
Audio
Input Signal Type: DM 8G+
Output Signal Type: HDMI
Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby®
TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master
Audio™, Up to 8ch PCM
Communications
DigitalMedia: DM 8G+, HDCP management, EDID format management, CEC
Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, RSTP
Connectors
HDMI OUT: (1) 19-pin Type A HDMI female;
HDMI digital video/audio output;
Also supports DVI[2]
COM: (1) 5-pin 3.5mm detachable terminal block, bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
IR 1 - 2: (1) 4-pin 3.5mm detachable terminal block comprising (2) IR/Serial
ports;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
LAN: (1) 8-wire RJ45 female, shielded;
10BaseT/100BaseTX Ethernet port
Ground: (1) 6-32 screw, chassis ground lug
DM IN: (1) 8-pin RJ45 female, shielded;
DM 8G+ input, accepts power over DM[3];
Connects to DM 8G+ output of a DM switcher, transmitter, or other DM
device via CAT5e or Crestron DM-CBL-8G cable[1]
24VDC 0.75A MAX: (1) 2.1mm barrel DC power jack;
24 Volt DC power input;
PW-2407WU power pack included
Controls & Indicators
HDMI OUT: (1) green LED, indicates video signal presence at the HDMI
output
LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED indicates
Ethernet activity
DM IN: (2) LEDs, green LED indicates DM link status, amber LED indicates
video and HDCP signal presence
RESET: (1) miniature recessed pushbutton, for hardware reset
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 29 BTU/Hr
Enclosure
Chassis: Metal, black finish, with (2) integral mounting flanges, vented top
and bottom
Mounting: Freestanding, surface mount, or attach to a single rack rail
Dimensions
Height: 6.09 in (155 mm)
Width: 5.63 in (143 mm)
Depth: 1.02 in (26 mm)
Weight
16.5 oz (468 g)
Available Models
DM-RMC-100-C: DigitalMedia 8G+™ Receiver & Room Controller 100
Included Accessories
PW-2407WU Wall Mount Power Pack 24VDC, 0.75A, Universal [Included
Quantity: 1]
Available Accessories
DM-CBL-8G-NP-SP500: DigitalMedia 8G™ Cable, non-plenum, 500 ft spool
DM-CBL-8G-P-SP500: DigitalMedia 8G™ Cable, plenum, 500 ft spool
DM-8G-CONN-100: DigitalMedia 8G™ Cable Connector, 100-Pack
DM-8G-CRIMP: Crimping Tool for DM-8G-CONN
CBL-HD-1.5: Crestron® Certified HDMI® Interface Cable, 1.5 ft
CBL-HD-3: Crestron® Certified HDMI® Interface Cable, 3 ft
CBL-HD-6: Crestron® Certified HDMI® Interface Cable, 6 ft
CBL-HD-12: Crestron® Certified HDMI® Interface Cable, 12 ft
CBL-HD-20: Crestron® Certified HDMI® Interface Cable, 20 ft
CBL-HD-30: Crestron® Certified HDMI® Interface Cable, 30 ft
CBL-HD-DVI-1.5: Crestron® Certified HDMI® to DVI Interface Cable, 1.5 ft
CBL-HD-DVI-3: Crestron® Certified HDMI® to DVI Interface Cable, 3 ft
CBL-HD-DVI-6: Crestron® Certified HDMI® to DVI Interface Cable, 6 ft
CBL-HD-DVI-12: Crestron® Certified HDMI® to DVI Interface Cable, 12 ft
CBL-HD-DVI-20: Crestron® Certified HDMI® to DVI Interface Cable, 20 ft
CBL-HD-DVI-30: Crestron® Certified HDMI® to DVI Interface Cable, 30 ft
MP-WP152-A: Media Presentation Wall Plate - HDMI®, Almond [Available
June, 2011]
MP-WP152-B: Media Presentation Wall Plate - HDMI®, Black
MP-WP152-W: Media Presentation Wall Plate - HDMI®, White
MP-WP140-A: Media Presentation Wall Plate - DVI-I w/Mini-TRS Stereo
Audio, Almond [Available June, 2011]
MP-WP140-B: Media Presentation Wall Plate - DVI-I w/Mini-TRS Stereo
Audio, Black
MP-WP140-W: Media Presentation Wall Plate - DVI-I w/Mini-TRS Stereo
Audio, White
MP-WP181-C-A: Media Presentation Wall Plate - Crestron DigitalMedia 8G
+™, Almond [Available June, 2011]
MP-WP181-C-B: Media Presentation Wall Plate - Crestron DigitalMedia 8G
+™, Black [Available June, 2011]
MP-WP181-C-W: Media Presentation Wall Plate - Crestron DigitalMedia 8G
+™, White [Available June, 2011]
MPI-WP150-120: Media Presentation Wall Plate - International Version HDMI® w/Mini-TRS Stereo Audio, White [Available July, 2011]
DM-RMC-100-C
MPI-WP181-C-120: Media Presentation Wall Plate - International Version Crestron DigitalMedia 8G+™, White [Available July, 2011]
MPI-WP181-C-122: Media Presentation Wall Plate - International Version Crestron DigitalMedia 8G+™, Anthracite [Available July, 2011]
CNSP-XX: Custom Serial Interface Cable
IRP2: IR Emitter Probe w/Terminal Block Connector
Notes:
1. For DM 8G+ wiring up to 330 ft (100 m) between devices, use Crestron
DM-CBL-8G DigitalMedia 8G Cable or generic CAT5e (or better) UTP or STP.
Or, use Crestron DM-CBL DigitalMedia Cable or DM-CBL-D DigitalMedia D Cable
for wiring distances up to 200 ft (61 m). Refer to DM 8G Cabling Options,
Doc. #4561 for all wiring alternatives, and the Crestron DigitalMedia
Design Guide, Doc. #4789 for complete wiring guidelines. All cable sold
separately.
2. HDMI requires an appropriate adapter or interface cable to accommodate
a DVI signal. CBL-HD-DVI interface cable available separately.
3. Power over DM requires connection to a DM 8G+ power sourcing device.
This product may be purchased from an authorized Crestron dealer. To find a
dealer, please contact the Crestron sales representative for your area. A
list of sales representatives is available online at www.crestron.
com/salesreps or by calling 800-237-2041.
Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DigitalMedia
8G+, DM, DM 8G, and DM 8G+ are trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and other countries.
Dolby, Dolby Digital, and the double-D symbol are either trademarks or
registered trademarks of Dolby Laboratories in the United States and/or
other countries. DTS, DTS-HD Master Audio, and the DTS logos and Symbol
are either trademarks or registered trademarks of DTS, Inc. in the United
States and/or other countries. HDMI and the HDMI Logo are either
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and/or other countries. Other trademarks and trade names may be
used in this document to refer to either the entities claiming the marks
and names or their products. Crestron disclaims proprietary interest in the
marks and names of others. ©2011 Crestron Electronics, Inc.
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
DM-RMC-100-C
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
All brand names, product names and trademarks are the property of their respective owners.
©2011 Crestron Electronics, Inc.
Specifications subject to change without notice. 5/17/2011
Download PDF