Advertisement
Advertisement
Cleargreen Freestanding Bath Tools required: Ø8.0mm Parts supplied: M5 *16mm 8x M5 *50mm 6x 6x 8x 4x 4x 2x ● Prior to installation check that all parts have been supplied. ● Assemble bath on a mat to protect against damage to bath surface. ● This product requires a two person lift - use proper lifting techniques. ● This installation guide does not include recommendation of waste connection; final decision about installation and waste connection should be taken by a suitably qualified person. ● Follow each step in turn. 1 2 1-2 C 3 4 As Required M5 *16mm ● Set the bath at the height as required from floor to the top of the bath rim. Install the panel on to the bath and adjust if required to ensure that the bath feet are level with the panel in fitted position. 5 6 D1 D2 D3 M5 *50mm Trap, waste and water feed connection should be completed first. Not for M1N, M1B. 2-2 C ">

Public link updated
The public link to your chat has been updated.
Advertisement