OREI UHD-EXB400UR-K HDMI Extender User Manual

18Gbps HDBaseT Extender (150m)
with USB 2.0
VER 1.0
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this manual
for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Table of Contents
1. Introduction........................................................................................... 1
2. Features................................................................................................. 1
3. Package Contents................................................................................ 2
4. Specifications....................................................................................... 2
5. Operation Controls and Functions...................................................... 4
5.1 Transmitter Panel............................................................................. 4
5.2 Receiver Panel................................................................................ 5
5.3 IR Pin Definition................................................................................ 6
6. Application Example............................................................................ 7
1. Introduction
This 18Gbps HDBaseT Extender can extend HDMI signal, bi-directional IR
control signal and USB KVM signal to a distance up to 150m via a single
CAT6 cable. This product converts HDMI signal to standard HDBaseT signal
and transmits it through LAN cable. It can easily control signal source device
or display device from the remote end through bi-directional IR signal passthrough function. Video resolution up to 4K2K@60Hz YUV 4:4:4. It also
supports USB 2.0 transmission and POC function.
The extender can be widely used in other fields such as video conference
system, multimedia signal broadcasting, HDMI signal extension, etc.
2. Features
☆ HDMI 2.0b and HDCP 2.2 compliant
☆ Support 18Gbps video bandwidth
☆ Support video resolution up to 4K2K@60Hz YUV 4:4:4
☆ The transmission distance can be extended up to 492ft / 150m at the
resoution of 1080P@60Hz, or 394ft / 120m at 4K2K@60Hz 4:4:4 via a
single CAT6 cable
☆ Support bi-directional IR signal and USB KVM signal pass-through
☆ Support bi-directional POC (Power over Cable) function
☆ Support USB 2.0 transmission
☆ EDID management
☆ Compact design for easy and flexible installation
1/7
3. Package Contents
① 1 x 18Gbps HDBaseT Extender (Transmitter)
② 1 x 18Gbps HDBaseT Extender (Receiver)
③ 1 x IR Blaster cable (1.5 meters)
④ 1 x IR Wideband Receiver cable (1.5 meters)
⑤ 4 x Mounting Ears
⑥ 8 x Machine Screws (KM3*4)
⑦ 1 x 24V/1A Locking Power Supply
⑧ 1x User Manual
4. Specifications
Technical
HDMI Compliance
HDMI 2.0b
HDCP Compliance
HDCP 2.2
Video Bandwidth
18Gbps
Video Resolution
Up to 4K2K@60Hz YUV 4:4:4
USB Compliance
IR Level
USB 2.0
5Vp-p
IR Frequency
Wideband 20K-60KHz
Transmission
Distance
1080P@60--150m, 4K60 --120m
Color Space
RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth
8-bit, 10-bit, 12-bit (1080P)
8-bit (4K60)
8-bit, 10-bit, 12-bit (4K24/30)
HDR
HDR, HDR10, HDR10+, Dolby Vision, HLG
Audio Format
LPCM 7.1CH, Dolby True HD and DTS-HD Master
ESD Protection
Human body model — ±8kV (Air-gap discharge) &
±4kV (Contact discharge)
2/7
Connection
Input:
Transmitter
1×HDMI IN [TypeA, 19-pin female]
1×IR IN [3.5mm Stereo Mini-jack]
1×SERVICE [Micro-USB jack]
1×USB [USB-B, 4-pin female]
Output: 1×HDBT OUT [RJ45]
1×IR OUT [3.5mm Stereo Mini-jack]
Input:
Receiver
1×HDBT IN [RJ45 with light]
1×IR IN [3.5mm Stereo Mini-jack]
1×SERVICE [Micro-USB jack]
Output: 1×HDMI OUT [TypeA, 19-pin female]
1×IR OUT [3.5mm Stereo Mini-jack]
2×USB 2.0 [USB-A, 4-pin female]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
Transmitter / Receiver:140mm (W)×65mm (D)×18mm (H)
Weight
Transmitter: 245g, Receiver: 249g
Power Supply
DC 24V/1A;
Support bi-directional POC function
Power Consumption 13.2W (Max.)
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity
20~90% RH (non-condensing)
3/7
5. Operation Controls and Functions
5.1 Transmitter Panel
COPY
SERVICE
STD
PWR
EDID
1
HDMI IN
HDBT OUT
DC 24V
3
2
4
IR IN
IR OUT
PC
6
5
7
8
9
10
11
No.
Name
Function Description
1
PWR LED
The red LED is on when the Transmitter is powered on.
2
EDID DIP
switch
Used for audio EDID setting (dial to COPY by default).
COPY: Copy the EDID of the HDMI OUT port of Receiver.
STD: Default 1080P 2CH
3
SERVICE
Firmware update port.
4
DC 24V
5
HDBT OUT
6
Link Signal
Indicator
(Green)
7
Data Signal
Indicator
(Yellow)
8
HDMI IN
DC 24V/1A power input port.
Note that the extender supports POC function, it means that either
Transmitter or Receiver is connected to 24V/1A power supply, the other
doesn’t need power supply.
HDBT output port, connecting to the HDBT IN port of the
Receiver with CAT6 cable.
▪ Illuminating: Transmitter and Receiver are in good connection
status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI signal input port, connecting to HDMI source device
such as DVD play or Set Top Box.
4/7
No.
Name
Function Description
IR IN
Connect to IR receiver cable, the IR receive signal will emit
to the IR OUT port of the Receiver.
10 IR OUT
Connect to IR blaster cable, the IR emit signal is from the IR
IN port of the Receiver.
11 PC
USB-B port, connecting to PC.
9
5.2 Receiver Panel
PWR
SERVICE
1
2
HDBT IN
DC 24V
3
5
4
6
HDMI OUT
IR IN
IR OUT
7
8
9
USB 2.0
USB 2.0
10
No.
Name
Function Description
1
Power LED
The power LED is on when the Receiver is powered on.
2
SERVICE
Firmware update port.
DC 24V/1A power input port.
3
DC 24V
4
HDBT IN
5
Link Signal
Indicator
(Green)
Note that the extender supports POC function, it means that either
Transmitter or Receiver is connected to 24V/1A power supply, the other
doesn’t need power supply.
HDBT input port, connecting to the HDBT OUT port of the
Transmitter with CAT6 cable.
▪ Illuminating: Transmitter and Receiver are in good connection
status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
5/7
No.
Name
Function Description
6
Data Signal
Indicator
(Yellow)
7
HDMI OUT
8
IR IN
9
IR OUT
▪ Illuminate: HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI signal output port, connecting to HDMI display device
such as TV or monitor.
Connect to the IR receiver cable. The IR signal will send
to the IR OUT port of the Transmitter.
Connect to the IR blaster cable, the IR signal is from IR
IN port of the Transmitter.
10
USB 2.0
ports
Two USB-A ports, connecting to USB 2.0 devices. (The
maximum output current of a single USB 2.0 port is 500mA,
exceeding which it will not work.)
5.3 IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
IR RECEIVER
IR Blaster
IR BLASTER
IR Blaster Signal
Power
NC
IR Receiver
IR Signal
Power
Grounding
Note:
When the angle between the IR receiver and the remote control is ± 45 °, the transmission
distance is 0-5 meters;
When the angle between the IR receiver and the remote control is ± 90 °, the transmission
distance is 0-8 meters.
6/7
6. Application Example
COPY
SERVICE
STD
PWR
EDID
Transmitter
HDMI IN
HDBT OUT
DC 24V
IR IN
IR OUT
PC
LAN
IR Blaster
Power Supply
IR Receiver
DVD or Blu-ray
Player
CAT6 Cable
IR Blaster
UHDTV
IR Receiver
PC
USB Camera
USB
LAN
HDBT IN
DC 24V
HDMI OUT
IR IN
IR OUT
USB 2.0
USB 2.0
Receiver
SERVICE
PWR
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
7/7
">