Call 1-800-667-8721 anywhere in the US and Canada www.rangehoods.com

at

:: rangehoods .

com

IN-LINE BLOWERS

MODELS HLB9 & HLB11

SPECIFICATION SHEET

Powerful yet quiet blowers - exhaust the cooking area from a remote location.

FEATURES

●

●

●

●

BLOWER:

● Low RPM for quiet operation

Resilient anti-vibration mounts

Dynamically-balanced, galvanized steel, centrifugal

● blower wheel for quiet, efficient performance

Permanently lubricated, thermally protected motor

Plug-in motor rated at 120 VAC

Designed for continuous operation

●

●

HOUSING:

● Rugged galvanized steel

● 8-position mounting brackets for easy installation and greater adaptability to various mounting

●

● requirements

Automatic backdraft damper located within exhaust duct connector

Factory-shipped in horizontal discharge position

May be converted to vertical discharge

Suitable for kitchen installations

●

●

ACCESSORIES INCLUDED:

● 8-inch x 12-inch integrated duct connectors

Two (2) 8-inch x 12-inch to 10-inch-round transitions

Hanger kit - for additional installation flexibility

SPECIFICATIONS

Model

HLB9

HLB11

Volts

120

120

Hz

60

60

Amps CFM Duct Weight

3.0

700 (V) 8” x 12” * 73.0 lbs.

800 (H)

5.0

1000 (V) 8” x 12” * 73.1 lbs.

1100 (H)

* Performance ratings include the addition of a 10” round transition on inlet and outlet.

TYPICAL SPECIFICATION

In-Line Blower shall be Model HLB9, (HLB11).

Unit shall have galvanized steel housing. Housing to have adjustable mounting brackets.

Blower to include hanger kit, two (2) 8-inch x 12-inch to

10-inch-round transitions, and 8-inch x 12-inch integrated duct connectors.

Automatic backdraft damper to be located within exhaust duct connectors. Duct connectors, blower assembly and wiring plate shall be adjustable for either horizontal or vertical installation.

Blower unit shall be removable from housing and will have a galvanized steel, centrifugal-type blower wheel.

Motor to be permanently lubricated and mounted with resilient anti-vibration mounts.

Air delivery shall be no less than listed for each model.

All air ratings shall be certified by HVI. Units to be UL and cUL listed.

8” x 12”

DUCT

REFERENCE QTY.

REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by

Broan at :: rangehoods .

com is a division of kitchen :: accessories

U N L I M I T E D

Date