™
™
E83015-00
E83016-00
E83004-00
E83005-00
®
®
20” High Speed
Electric Burnishers
Operator and Parts
Manual
1001 Brown Avenue • Toledo, Ohio 43607-0127
Customer Service: 888-GO-BETCO • Fax: 800-445-5056 • Technical Service: 877-856-5954 • www.betco.com
1
2
Specifications
t
Burnishing Path/Pad Size: 20” t
Hour Meter: Yes / 0.1 hour resolution t
Motor: 1.5 hp, 120v, 15 A, 50/60 HZ t
Pad Pressure: 15 lbs. t Pad Speed: 1600/2000 RPM t Drive System: V-Belt t Power Cord: 75’ 14/3 Safety Yellow t Handle Grips: Anti-Fatigue t Operating Wheels: 5” Non-marking t
Transport Wheels: 4” Non-marking t
Productivity: 10-15,000 sq.ft. / Hour t
Weight: 70 lbs.
t
Dimensions: Length 33.75”, Width 21”, Height 50”
Carefully read and understand this manual before operating this machine.
To reduce risk of fire, electric shock, or injury:
t Do not operate in explosive areas, near flammable liquids or gases. t Only plug into a properly grounded outlet. t Do not exposure to rain, store indoors. t Do not plug in or handle machine with wet hands. t Do not operate the machine with a damaged cord or plug. t Do not block or disconnect safety lever. t Do not leave machine plugged in while unattended. t Unplug machine before servicing. t Do not put fingers under the pad or pad holder. t Unplug the machine before installing or removing the pad. t Use only high speed burnishing pads. t Do not put any foreign object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, & anything that may reduce airflow. t Keep hair, loose clothing, fingers, & all parts of body away from openings
& moving parts. t Turn off all controls before unplugging. t Do not use in or around flammable or combustible liquids such as gasoline or use in areas where they may be present. t Connect to a properly grounded outlet only. See grounding instructions. t Do not use to spray buff
3
4
Grounding Instructions
This machine must be grounded. If it should electrically malfunction, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor & grounding plug. The plug must be plugged into an appropriate outlet that is properly installed & grounded in accordance with all local codes & ordinances.
! DANGER !
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the machine. If plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
Replace the plug if the grounding pin is damaged or broken.
Extension cords connected to this machine should be 12 gauge, 3-wire cords with 3-prong plugs & outlets. DO NOT use extension cords more than 50 feet long.
Operating Instructions
Check machine for damage to cord or plug.
Use only Hi Speed Burnishing pads 20” or 19” diameter.
To install or change the pad:
1. Unplug the machine.
2. Tip the machine back on the wheels.
3. Remove the center-lock.
4. Center the pad on the pad driver.
5. Replace the center-lock and tighten securely.
To operate the machine:
1. Plug into a grounded outlet.
2. Release the handle and lower it.
3. The handle can be locked into a comfortable position for the operator or used free floating.
4. Press the safety lever and squeeze the trigger to start the machine.
5. Do not operate in one place as damage to the floor or finish could result.
6. Do not operate the machine with the handle in the upright position.
7. Remove the pad after every use.
8. Store the machine tilted back on the transport wheels.
9. Use only new or clean pads and reverse them as needed.
Maintenance Instructions
To maintain appearance – wipe the machine with a damp cloth after use.
Warning – Unplug the machine before servicing
This machine is equipped with an hour meter to signal maintenance intervals of
250 hours. It will begin flashing at 245 hrs and stop at 255 hrs to signal the operator to check the following:
1. Check the motor brushes for wear or excessive arcing.
2. Check belt tension.
3. Check the cord and electrical system.
4. Check the safety lockout on the trigger.
5. Check wheels and bearings.
5
6
19
17
HANDLE PARTS
16
10
13
18
9
15
10
INSIDE
TUBE
7
14
16
8
12 11
6
6
1
5
3
1
7
INSIDE
TUBE
38
INSIDE
TUBE
2
4
35
INSIDE
CORD
HOOK
39
30
39
23
21
ROD THROUGH BASE
22
20
31
34
31
25
24
INSIDE
HANDLE
CAM
LOCK
26
29
32
27
28
33
36
31
INSIDE
BASE
35
Not Shown - EP50064 Cam Lock Handle Asm
27
28
29
30
23
24
25
26
19
20
21
22
15
16
17
18
12
13
14
8
9
10
11
6
7
4
5
ITEM#
1
2
3
35
36
37
38
31
32
33
34
E83145
E81077
E83133
E83269
E83143
E82717
E83136
E83711
39 E83452
Not Shown PE50064
PART#
E83523
E83132
E83789
E83131
E83496
E81064
E83520
E83127
E83427
E83426
E83130
E83270
E85032
E83129
E83137
E83133
E83135
E83266
E83268
E83133
E81379
E81063
E82752
E83325
E82750
E81105
E83451
E81065
E81070
E83519
HANDLE PARTS
DESCRIPTION
NYLON CABLE TIE
CORD, HANDLE, 14-3
NUT, ELECTRICAL CONDUIT, 1/2"
CORD, 75 FEET, 14-3 ST
STRAIN RELIEF FOR REPLACEMENT
BOLT, HEX, 1/4-20 x 3/4
NUT, NYLOCK, 1/4-20
GRIP
SCREW, PHILLIPS, No. 6 x 1
SCREW, PHILLIPS, 1/4-20 x 1.75
SPRING
CLIP, SPRING
SWITCH
SAFETY LOCK
TRIGGER, SWITCH
COVER, SWITCH BOX
SWITCH BOX, HANDLE, SINGLE SPEED
PLATE, SWITCH
HANDLE TUBE, 7/8 x 16
BOLT, HEX, 1/4-20 x 1-3/4, GRADE 5
NUT, NYLOCK, 1/4-20
GROMMET, .375 ID
CORD HOOK
BOLT, ADJUSTABLE, CAM, 5/16-18
OVAL WASHER
PIN, .25 x .75
CAP, PUSH, .25
HANDLE, CAM LOCK
WASHER, SPRING, 3/8
NUT, NYLOK, 5/16-18
WASHER, NYLON
BOLT, SHOULDER, 3/8 x 1
WASHER, SPRING, 1/4
WASHER, SPRING, 1/2
CAPS, AXLE, 0.5
HANDLE ATTACHMENT, WELDED "T"
BRACKET, FLAT, HANDLE
HANDLE TUBE
AXLE, 1/2 x 12.375
Cam Lock Assembly
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
5
1
1
1
1
4
1
2
2
2
2
1
1
QTY.
2
1
1
7
8
12
BASE, MOTOR, AND WHEELS
1
15
14
13
25
2
11
14
13 14
4
3
35
17
18
29
36
27
28
27
17
18
26
30
31
9
8
10
16
33
34
6
7
5
17
18
21
23
20
19
38 or 38B
22
24
37 or 37B
32
Not Shown - EP50089 - Pad Driver Pulley Asm
ITEM
1
2
SKU
E83147
E81128
29
30
31
32
25
26
27
28
33
34
35
36
37
38
37B
E81080
E83149
E81276
E83140
38B E83478
Not Shown E85042
Not Shown E85053
E83139
E85396
E83310
E83377
E83376
E83148
E81150
E83190
E81069
E83629
E83150
18
19
20
21
14
15
16
17
22
23
24
9
10
7
8
5
6
3
4
11
12
13
E83145
E83142
E83379
E11136
E81066
E81087
E11721
E83787
E81072
E81062
E81067
E83138
E83141
E83570
E89334
E81078
E81068
E83425
E83651
E83144
E83143
E83269
BASE, MOTOR, AND WHEELS
DESCRIPTION
HOUR METER
COVER, MOTOR, BURGANDY, HS
BASE, HIGH SPEED
BUMPER
SCREW, PHILLIPS, 1/4-20 x 1
WASHER, FLAT, 1/4
WASHER, LOCK, 1/4
WASHER, FENDER, 1/4
SCREW, PHILLIPS, 1/4-20 x 1
AXLE, 1/2 x 17.25
WHEEL, 5 INCH
CAPS, AXLE, 0.5
WASHER, SPRING, 1/2
WASHER, NYLON
WHEEL, 4 INCH
AXLE, 1/2 x 13.875
WASHER, FLAT, 3/8
WASHER, LOCK, 3/8
BOLT, HEX, 3/8-16 x 1.5"
KEY, 3/16 x 3/16 x 1
SPACER, .75 ID
BOLT, HEX, 5/16-18 x 1
WASHER, FLAT, USS, 5/16
WASHER, LOCK, 5/16
MOTOR, 1.5 HP, 3200 RPM
BOLT, HEX, 3/8-16 x 1
BEARING
SPACER, PULLEY BEARINGS
PULLEY, PAD DRIVE
PAD DRIVER, COMPLETE ASSEMBLY
CENTERING DEVICE, BIG MOUTH
SCREW, PHILLIPS PAN, ZN, 5/16-18 x 1.25
NUT, 3/8-16
BOLT, HEX, 3/8-16 x 1.25
BRACKET, PULLEY MOUNT
BOLT, HEX, 3/8-16 x .75
BELT, 2000 RPM
PULLEY,2000 RPM
BELT, 1600 RPM
PULLEY, 1600 RPM
Rectifier
Carbon Brush Set of 4
QTY.
1
1
1
4
1
1
2
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1
9
4
1
13
8
2
1
1
1
2
1
4
2
4
4
1
1
2
4
4
9
10
MOTOR COVERS
ITEM SKU
DESCRIPTION
1 E83146 COVER, MOTOR, RED, HIGH SPEED
2 E83570 SCREW, PHILLIPS, 1/4 -20 x 1
2
1
2
ITEM
SKU
DESCRIPTION
1 E81141 COVER, MOTOR, 9" OD x 2.65 TALL
2 E81523 SCREW, PHILLIPS, 8/32 x 3/8 TRUSS HEAD
4
3
QTY.
1
3
QTY.
1
4
4
4
1
ELECTRICAL
Power Cord
Micro
Switch
Handle Cord
G
B
W
Motor
Standard Machines
Not Shown E85053 Carbon Brush Set of 4
11
BETCO US WARRANTY POLICY
10 year coverage 3 Year Coverage 1 Year Coverage
Subject to the conditions stated below,
Betco warrants parts and labor on rotationally molded polyethylene tanks/ housings and injection molded vacuum head assemblies to be free from defects in materials and workmanship for a period of ten years to the original purchaser.
Subject to the conditions stated below,
Betco warrants parts and labor on all other Betco components to be free from defects in materials and workmanship for a period of three years to the original purchaser.
Subject to the conditions stated below,
Betco offers a limited warranty on parts and labor on the following equipment: parts and accessories to be free from defects in materials and workmanship for a period of one year to the original purchaser.
• DM Series Vacuums: #85506-00,
#85507-00
• Bac Pac Lite Vacuum: #85903-00
• FiberPRO® Floor Dryer: #85507-00
• WORKMAN™ Series Vacuums:
#85024-00, #85025-00, #85026-00,
#85027-00
• CV100T Vacuum: #85023-00
• All Tools and Accessories
• All Battery Chargers
• All Batteries are pro-rated for 1 year
Allowable Travel Time Warranty Reimbursement:
Eligible equipment: All battery and propane powered equipment products. Warranty period: 90 days from date of sale to the original purchaser. A maximum 60 mile round trip at 44 cents per mile will be allowed for warranty consideration.
Propane Machine Warranty:
Honda engines are warranted by Honda for a period of 2 years against manufacturer defects. Kawasaki engines are warranted by Kawasaki for a period of 2 years against manufacturer defects. All other components (except wear items)* are warranted by Betco for a period of 3 years.
*Wear Items exempt from Warranty consideration include but may not be limited to: power cords, transport wheels, vacuum bags, belts, squeegee blades, pad drivers, clutch plates, handle grips, fi lters, screens, throttle cables, brushes and carbon brushes.
Subject to the conditions and exceptions stated in this warranty, Betco warrants the Betco products to be free from defects in material and workmanship, under normal use and service, for the periods listed under the warranty policy to the original purchaser. At any time during the warranty period, Betco will furnish replacement parts for the Betco parts to the original purchaser. Such parts will be furnished and charged including transportation costs, to the original owner through any Betco authorized
Service Distributor. If the original part is returned within the warranty policy period from date of delivery for inspection by
Betco and is found to be defective the owner will be credited for the cost of replacement parts plus shipping and handling.
Replacement parts that have become defective through wear or abuse are not included in this warranty.
This warranty does not apply to damage or defect caused by accident, misuse. Negligence, fi re, or to any Betco product which has been serviced or repaired by other than an authorized Betco Service Distributor or Betco factory personnel. This warranty is void if products are used for any purpose other than that which was intended. There are no other warranties expressed or implied. In no event shall Betco be liable for incidental or consequential damages or any damage to person or property. (Please note some states do not allow the exclusion or limitations for incidental and consequential damages)
12
1001 Brown Avenue • Toledo, Ohio 43607-0127
Customer Service: 888-GO-BETCO • Fax: 800-445-5056 • Technical Service: 877-856-5954 • www.betco.com
E83015-00 Nov10D
