Section P - Occupancy Sensors Lighting Controls

Section P - Occupancy Sensors Lighting Controls
Occupancy Sensor
Lighting Controls
Leviton’s Wall Switch and Ceiling Mounted Occupancy Sensors use
passive infrared or ultrasonic sensing technology to provide costeffective lighting control. Leviton Occupancy Sensors are capable of
monitoring conference rooms, classrooms, stairwells, stock rooms,
lounges, rest rooms, and outdoor areas.
The Passive Infrared (PIR) units respond to change in the infrared
background by turning lights ON when people enter a space being
monitored, and OFF when the space is unoccupied. The ultrasonic
units transmit ultrasound and monitor for changes in the signal’s
return time to detect occupancy, turning lights ON when movement
is detected, and OFF when the space is unoccupied. By analyzing
traffic flow, Leviton Occupancy Sensors can be installed to generate
significant lighting cost savings combined with energy efficiency.
OCCUPANCY SENSOR
LIGHTING CONTROLS
Overview ____________________________P1
Decora Wall Switch Infrared
Occupancy Sensors ___________________P2
Decora Dual-Relay Wall Switch Infrared
Occupancy Sensor ____________________P2
Centura™ Fluorescent
Energy Management System ________P3, P4
Self-Contained Infrared Ceiling Mount
Occupancy Sensor ____________________P5
Multi-Tech Ceiling Mount
Occupancy Sensor ____________________P6
Ultrasonic Ceiling Mount
Occupancy Sensor ____________________P7
Infrared Ceiling Mount
Occupancy Sensor ____________________P8
Multi-Tech Wall Mount
Occupancy Sensor ____________________P9
Infrared Wide-View Wall Mount
Occupancy Sensor ___________________P10
Infrared High-Bay Wall Mount
Occupancy Sensor ___________________P10
Power Packs for Occupancy Sensors ___P11
Infrared Outdoor Motion Sensors _______P12
S E C T I O N
P
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Occupancy Sensor Lighting Controls
Leviton provides a variety of spacemonitoring Occupancy Sensor Lighting
Controls for virtually any room, space,
facility, home or office. Wall or ceiling,
passive infrared or ultrasonic, end
users will benefit from Leviton's
Occupancy Sensors as a direct result
of their energy efficiency and obvious
cost-effectiveness.
Passive Infrared
(PIR) detection
technolgy to monitor
room for occupancy
Fresnel lenses for “small motion” detection
to monitor room movement
Sensor automatically
sends signal to switch
lights on and keep them
on when room is occupied
and activity detected
Features and Benefits
■ 180° field of view, covers approximately 2100
square feet
■ Selectable base time-delay interval from 30
seconds to 20 minutes
■ Self-adjusting delayed off time interval
compensates for real time occupancy patterns,
preventing unnecessary on/off switching
■ Can be used with incandescent or fluorescent
lighting
■ Motion-activated; infrared sensing technology
turns lights ON when room is occupied and OFF
when unoccupied
■ Replaces standard switches in existing wallboxes
■ Ambient light override keeps lights off when
there’s plenty of sunlight
■ Push-button manual override allows controls to
be used like standard ON/OFF switches;
manual-ON/Auto-OFF mode
■ “Walk-Through” feature shuts off lights after 21/2
minutes rather than an extended period
■ Compatible with Decora designer-styled devices
■ Backed by a Limited Five-Year Warranty
180° field of view, 2,100
square feet of coverage
Adjustable delayed offtime (30 seconds 20 min-
LED indicator
light flashes
when sensor
detects motion
Ambient light
override prevents
the sensor from
switching lights
on when there is
ample natural
sunlight
Cat. No. ODS15-IDW
Versatile Occupancy Sensor Lighting Controls for Cost-Effective Energy Savings
Multi-Technology
Ceiling-Mount
Occupancy Sensor
Multi-Technology
Wall-Mount
Occupancy Sensor
Infrared High-Bay
Wall-Mount
Occupancy Sensor
Combines infrared and
ultrasonic technology
for highly accurate monitoring. 360°, 2000 sq. ft
coverages.
Combines infrared and
ultrasonic technology
for highly accurate
monitoring. 110°, 1200
sq. ft coverage.
Ideal for warehouse aisles,
hallways, stairways and
other long, narrow spaces.
Cat. No. ODC20-M0W
Cat. No. ODW12-M0W
Cat. No. ODWHB-I0W
Self-Contained Ceiling
Mount PIR
Occupancy Sensor
Contains sensor and
switching relay; 360° field
of view; adjustable
delayed off time of 20
seconds to 15 minutes.
Cat. No. ODC0S-I1W
Dual-Relay Decora Wall
Switch Infrared
Occupancy Sensor
Controls two separate lighting loads from a single unit.
Features self-adjusting
technology and choice of
Classroom or Conference
Room modes for maximum
performance.
Outdoor Motion Sensor
Ideal for
commercial/industrial
settings, with temperature compensation to
ensure performance in
all weather conditions.
Cat. No. PS200-10W
Cat. No. ODS0D-IDW
P1
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Occupancy Sensor
Lighting Controls
Commercial Grade
Decora ® Wall Switch Infrared Occupancy Sensor
(Incandescent or Fluorescent)
DESCRIPTION
CAT. NO.
RATING
COLOR
Decora Wall Switch
PIR Occupancy Sensor
with Self-Adaptive Technology
ODS15-ID
(formerly 6768)
I, W, G, A
Decora Wall Switch
PIR Occupancy Sensor
ODS10-ID
(formerly 16775)
Fluorescent: 1800VA @ 120V,
4000VA @ 277V.
Incandescent: 1800W @ 120V.
Motor: 1/4 HP @ 120V
Incandescent: 800W @ 120V,
Fluorescent: 1200VA @ 120V,
2700VA @ 277V.
For 60 Hz AC only.
Motor: 1/4 HP @ 120V
I, W, G, A
Dual-Relay Decora ® Wall Switch Infrared Occupancy Sensor
DESCRIPTION
CAT. NO.
PHOTOCELL
CONTROL OPTIONS
PER RELAY
RATING
COLOR
Dual-Relay Decora
Wall Switch PIR
Occupancy Sensor
with Self-Adaptive
Technology
ODS0D-ID
(formerly
6772)
Default Setting: Conference Room Mode
Both Primary.and Secondary
Relays respond to
Ambient Light Override.
Alternate Setting: Classroom Mode
Primary Relay only
responds to Ambient Light
Override.
Primary Relay:
Fluorescent: 1200VA @ 120V,
2700VA @ 277V
Incandescent: 800W @ 120V.
Secondary Relay:
Fluorescent: 800VA @ 120V,
1200VA 277V.
Incandescent: 800W @ 120V
I, W, G, A
ODS15-IDW in 80301-W
Decora® Wall Switch Infrared Occupancy Sensor
DESCRIPTION
CAT. NO.
RATING
COLOR
Decora Wall Switch PIR Occupancy
Sensor, Single-Pole & 3-Way,
180° field of view
PR180-1L
Incandescent: 500W,
Fluorescent: 400VA Rapid Start Magnetic only @ 120V AC,
Motor: 1⁄8 HP @ 120V AC
I, W, A
ODS0D-IDW in 80301-W
Residential Grade
Decora® Wall Switch Infrared Occupancy Sensor
DESCRIPTION
CAT. NO.
RATING
COLOR
Decora Wall Switch PIR Occupancy
Sensor, Single-Pole,
150° field of view
PR150-1L
Incandescent: 500W,
Fluorescent: 400VA Rapid Start Magnetic only @ 120V AC,
Motor: 1⁄8 HP @ 120V AC
I, W, A
All devices are UL Listed and CSA Certified.
SPECIFICATIONS & FEATURES
1.75 (44.4 mm)
1.30
(33.0 mm)
0.49 (12.6 mm)
ON
OFF
AUTO
BOTTOM
Cat. No. ODS15-ID
2.60 (66.1 mm)
4.06 (103.2 mm)
2.61 (66.3 mm)
1.35
(34.3 mm)
Decora Wall Switch PIR Occupancy
Sensor (ODS15-ID)
• For use in small offices, conference
rooms, class rooms, stock rooms,
lounges, restrooms, warehouses &
commercial areas
• Exclusive automatic “Walk-Through”
sensing increases energy savings
by shutting lights within 2 1⁄2 minutes
after momentary occupancy
• Self-adjusting delayed OFF-time
interval compensates for real-time
occupancy patterns, preventing
unnecessary ON/OFF switching
• 180° field of view, 2100 sq. ft. of
coverage
Dual-Relay Decora Wall Switch PIR
Occupancy Sensor (ODS0D-ID)
• Ideal for class rooms and conference
rooms
• Exclusive automatic “Walk-Through”
sensing
• Provides automatic switching for 2
separate banks of fluorescent, incandescent, or low-voltage lighting from
a single unit
• Self-adjusting delayed OFF-time
interval compensates for real-time
occupancy patterns, preventing
unnecessary ON/OFF switching
• 180° field of view, 2100 sq. ft. of
coverage
• Ambient light override prevents these
devices from switching lights ON
when there is ample natural sunlight
• Push-button manual override is used
to turn lights ON at any time, regardless of the override setting
Wall Switch PIR Occupancy Sensor
(ODS10-ID)
• For use in enclosed offices, storage
rooms, copier rooms & closets
• One unit can be used for 120V or
277VAC 60Hz incandescent, lowvoltage and fluorescent lighting with
either magnetic or electronic ballasts,
and motor loads.
• 180° field of view
• Fits in standard wallbox; gangable
• Delayed-off time settings: 10, 20
and 30 minutes with 30-second
test mode
• Elegant Decora styling; uses Decora
wallplate
TESTING & CODE COMPLIANCE
•
•
•
•
•
UL Listed (File #E-118904)
Cat. No. ODS0D-ID is CUL/US Certified
CSA Certified (File #LR-91148M)
NOM Certified (#057)
Conforms to California Title 24
Energy Code
• Backed by a Limited Five-Year Warranty
COLOR
Colors available as listed, add suffix to
catalog number as follows: Ivory (-I),
White (-W), Gray (-G), Almond (-A).
MATERIAL CHARACTERISTICS
Operating Temperature: 0°C to 50°C
Storage Temperature: -10°C to 85°C
Relative Humidity: 20% to 90% noncondensing
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
P2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Fluorescent Energy
Management System
Centura™ Fluorescent Energy Management System
Centura combines the technology of "daylight harvesting " with a host of innovative energy-efficient modular lighting controls, including dimmers, timers, occupancy sensors and
photo-sensors that dim or turn off fluorescent lighting when a space is not being used.
Centura incorporates the ability to interface with any Leviton occupancy sensor to provide
even greater energy savings. When single or multiple occupancy sensors are installed,
programmed interior lighting is automatically turned OFF when the room is vacant and
back ON to the programmed level when occupancy is detected. The use of movement
sensors means energy savings up to a proven 50%.
Leviton Occupancy Sensors Compatible with Centura System
DESCRIPTION
CAT. NO.
COVERAGE
PAGE NO.
Multi-Tech Ceiling Sensor
ODC05-M0W
180°, 500 sq. ft
P6
Multi-Tech Ceiling Sensor
ODC10-M0W
180°, 1000 sq. ft
P6
Multi-Tech Ceiling Sensor
ODC20-M0W
360°, 2000 sq. ft
P6
Ultrasonic Ceiling Sensor
ODC05-U0W
180°, 500 sq. ft
P7
Ultrasonic Ceiling Sensor
ODC10-U0W
180°, 1000 sq. ft
P7
Ultrasonic Ceiling Sensor
ODC20-U0W
360°, 2000 sq. ft
P7
PIR Ceiling Sensor
ODC04-I0W
360°, 450 sq. ft
P8
Multi-Tech Wall Sensor
ODW12-M0W
110°, 1200 sq. ft
P9
PIR High-Bay Sensor
ODWHB-I0W
120 ft, 14 ft wide @ 30 ft height
P10
PIR Wide-View Sensor
ODWWV-I0W
110°, 2500 sq. ft
P10
Note: The Leviton Occupancy Sensors listed can be powered by the Centura Dimming Power Pack–Use of a separate
Occupancy Sensor Power Pack is not required. Agency approvals for all Centura components are UL, CSA, FCC, and
California Title 24 (where applicable).
CONTROLLER
Cat. No. CN221
OCCUPANCY
SENSOR
PHOTOCELL
Cat. No. ODC0P
Phase
Dimming Power Pack
Cat. No. CN100
POWER (+24V)
GROUND
OCCUPANY
CAN_H
CAN_L
PHOTCELL
Neutral
DIM
RETURN
HVAC NO
HVAC NC
HVAC COMM.
HVAC
Interface
0–10V DC Ballast
CENTURA™ ENERGY MANAGEMENT SYSTEM
ESSENTIAL COMPONENTS
For more information on the Centura™ Fluorescent Energy Management
System, visit Leviton’s website at www.leviton.com/centura
P3
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Fluorescent Energy
Management System
Commercial Grade
Centura™ Fluorescent Energy Management System
Leviton’s new Centura™, a modular lighting control system for dimming fluorescent ballasts (Advance Mark
VII™, OSRAM Sylvania Quicktronic® Helios™ and Energy Savings SuperDim™), brings increased energy savings to commercial spaces. Using a technique known as “daylight harvesting”, Centura factors in the available
daylight for the precise control of fluorescent light levels to achieve optimum comfort and energy efficiency.
Centura™ Fluorescent Energy Management System
DESCRIPTION
CAT. NO.
RATING
Centura Dimming Power Pack*—ON/OFF and
DIM/BRIGHT control of 0-10VDC dimming
fluorescent ballasts. Responds to Wall Controller,
Occupancy Sensor and Photocell input and
provides +24 VDC power supply for these
devices. Programmed via Wall Controller or
via Leviton Personal Dimmer software from
a PC. Secondary relay sends control signals
to HVAC system. LED's indicate operation mode.
CN100-0D0
2400VA @ 120V AC 60Hz, 5500VA Gray Metallic
@ 277V AC 60Hz. For use with
0-10VDC Advance Mark VII™,
OSRAM Sylvania Quicktronic®
Helios™, Energy Savings
SuperDim™ and comparable
ballasts only
Centura Dimming Controller with Infrared Receiver*—
Decora-style 5-button unit for ON/OFF,
DIM/BRIGHT and MAX override.
Built-in IR receiver for use with Centura
NE200-00E Hand-Held Remote. Programs
energy management functions.
CN200-00C
No load rating, for use with
Centura Dimming Power Pack only
White
(Ivory color
change kit
included)
Centura Hand-Held Remote Controller Infrared—
Remote provides convenient ON/OFF,
DIM/BRIGHT control presets and programming.
Designed for use with Centura CN200 Entry
Station with Infrared Receiver.
NE200-00E
No load rating, for use with
Centura CN200 Controller only
Black
Centura Switching Controller*—
Decora-style rocker for ON/OFF switching
CN220-00C
No load rating
White
(Ivory color
change kit
included)
Centura Dimming Controller*—Decora-style
rocker for ON/OFF switching with built-in
arrow-shaped rocker for DIM/BRIGHT control.
LED display indicates selected brightness level.
Programs energy management functions—
back of wallplate provides instruction label that
lines up with LED's to facilitate programming.
CN221-00C
Centura Photocell*—Detects available light
levels for “Daylight Harvesting”. Allows Centura
system to maintain a programmed light level by
constantly adjusting fluorescent light output to
compensate for changes in available daylight.
Centura SmartJack*—Allows desktop PC
control of Centura Lighting Control System.
Includes a cable for connecting the SmartJack
to a PC and a mini-CD containing server,
administrator and user software. For the latest
software upgrades, check Leviton’s website
COLOR
No load rating, for use with
Centura Dimming
Power Pack only
White
(Ivory color
change kit
included)
ODC0P
No load rating, for use with
Centura Dimming
Power Pack only.
0–70 foot candles
White
NE100-00C
No load rating, for use with
Centura Power Pack
White
(Ivory color
change kit
included)
CN100
CN221
SPECIFICATIONS & FEATURES
• Ideal for commercial spaces and
individual offices
• Reduces eyestrain and fatigue from
glare, Increasing comfort and productivity
• All functions conveniently accessed
through Controllers or via Leviton
Personal Dimmer software from
a PC
• Dimming Power Pack provides lowvoltage power supply for Controllers,
Photocell and Occupancy Sensors
• Photocell provides energy savings
through Daylight Harvesting
technology
• Use with Leviton Occupancy
Sensors for increased energy savings: Lights turn ON automatically to
programmed levels when personnel
enter area; OFF automatically when
area becomes vacant
• Modular system design expands
energy saving options with an interface for building emergency systems, load shedding programs and
time clock systems
• Dimming Power Pack mounts in
standard 4" square back box. Entry
Station Wall Switch mounts in standard single-gang switch box.
TESTING & CODE COMPLIANCE
• *Agency approvals for all Centura
components are UL, CSA, NOM,
FCC, and California Title 24 (where
applicable) except for the handheld remote controller
For more information on the Centura™ Fluorescent Energy Management
System, visit Leviton’s website at www.leviton.com/centura
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
P4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Occupancy Sensor
Lighting Controls
Self-Contained Ceiling-Mount Occupancy Sensor
PIR Occupancy Sensor with built-in relay—Separate Power Pack not required
DESCRIPTION
CAT. NO.
RATING
COVERAGE
COLOR
Self-Contained Ceiling-Mount
Infrared Occupancy Sensor
and Switching Relay
ODC0S-I1W
(formerly
16786-120)
Incandescent:
1000W @ 120V.
Fluorescent:
1000VA @ 120V.
1 HP @ 120V
For 60Hz AC only
360°, 530 sq. ft
White
Self-Contained Ceiling-Mount
Infrared Occupancy Sensor
and Switching Relay
ODC0S-I2W
Incandescent:
1000W @ 220V.
Fluorescent:
500VA @ 220V.
For 50Hz AC only
360°, 530 sq. ft
White
Self-Contained Ceiling-Mount
Infrared Occupancy Sensor
and Switching Relay
ODC0S-I7W
(formerly
16786-277)
Fluorescent:
2700VA @ 277V.
For 60Hz AC only
360°, 530 sq. ft
White
Protective Cage
ODCCG
—
—
White
ODC0S-I1W
All devices are UL Listed and CSA Certified.
2.15 (54.6 mm)
SPECIFICATIONS & FEATURES
• Ideal for use in storage areas, small
bathrooms, copy rooms and a variety
of small spaces without wall switches
• Full 360° view of a 530 sq. ft. area
when surface mounted on standard,
8-foot ceiling
• Sensor and switching relay combined in a single self-contained
unit—No control unit required
• Ambient light override option prevents lights from turning ON when
there is ample natural light
• Adjustable Delayed-OFF time settings from 20 seconds (for test
mode) to 15 minutes
• Small, unobtrusive self-contained
unit: 4.3" (109.2 mm) diameter
TESTING & CODE COMPLIANCE
• UL Listed
• CSA Certified
4.3 (109.2 mm)
Cat. No. ODC0S-I1W
P5
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Occupancy Sensor
Lighting Controls
Commercial Grade
Multi-Technology Ceiling-Mount Occupancy Sensor (For use with Leviton
Power Pack)* Advanced motion sensors combine infrared and ultrasonic technology for highly accurate
monitoring without false triggering. All-digital self-adjusting technology provides “Install and Forget” solution
for automatic lighting control
DESCRIPTION
CAT. NO.
COVERAGE
OPERATING
FREQUENCY
COLOR
Multi-Tech Ceiling-Mount
Occupancy Sensor
ODC05-M0W
180°, 500 sq. ft
40kHz
White
Multi-Tech Ceiling-Mount
Occupancy Sensor with Ambient Light
Override and Secondary Relay
ODC05-MRW
180°, 500 sq. ft
40kHz
White
Multi-Tech Ceiling-Mount
Occupancy Sensor
ODC10-M0W
180°, 1000 sq. ft
32kHz
White
Multi-Tech Ceiling-Mount
Occupancy Sensor with Ambient Light
Override and Secondary Relay
ODC10-MRW
180°,1000 sq. ft
32kHz
White
Multi-Tech Ceiling-Mount
Occupancy Sensor
ODC20-M0W
360°, 2000 sq. ft
32kHz
White
Multi-Tech Ceiling-Mount
Occupancy Sensor with Ambient Light
Override and Secondary Relay
ODC20-MRW
360°, 2000 sq. ft
32kHz
White
Hard-Ceiling Raceway Adapter Kit
ODCRA-000
—
—
White
Protective Cage for Ceiling-Mount
Occupancy Sensors
ODCCG-000
—
—
White
ODC20-M0W
*Low-voltage wiring is used to connect Leviton Occupancy Sensors to Cat. No. ODP20 Power Pack (purchased separately).
See page P11 for Power Pack information.
All devices are CUL/US Certified.
1.40
(35.6 mm)
ø 4.53
(115.1 mm)
SPECIFICATIONS & FEATURES
Cat. Nos. ODC050-M, ODC10-M
1.40
(35.6 mm)
ø 4.53
(115.1 mm)
• Ideal for office areas with cubicles,
general work space, warehouse and
storage facilities, cafeterias and
public areas in commercial facilities
• Ultrasonic sensing for maximum
sensitivity combined with Passive
Infrared (PIR) sensing to prevent
false triggering from air conditioning
and corridor activity
• Self-adjusting settings continuously
analyze and adjust infrared sensitivity, timer operation, and air current
compensation for reliable, long-term
performance
• Automatic dual-mode operation
adjusts to either economy or highsensitivity mode based on actual
occupancy patterns for maximum
energy savings
• Built-in Circadian Calendar —
Provides 4-week learning period
where the sensor monitors occupancy to establish trends that
serve as the basis for automatic
operation. During peak occupancy
periods the sensor remains in highsensitivity mode and during low
occupancy periods it switches to
economy mode.
• Manual Delayed-OFF time settings
of 8, 16, and 32 minutes, with
8-second test mode
• Self-Adjusting Delayed-OFF time
interval settings for 8 to 100 minutes
— Compensates for real-time
occupancy patterns, preventing
unnecessary ON/OFF switching
• Non-volatile memory preserves all
automatic and manual settings
during power outages
• Choice of coverage patterns to suits
a variety of applications
• Small, unobtrusive size (4.5"
diameter) blends in with any décor
• Fast, simple installation using 3
color-coded low-voltage wires and a
single mounting post
• Hard-Ceiling Raceway Adapter Kit
(optional) provides complete solution for mounting occupancy sensors to hard ceilings. Two-piece kit
contains Adapter Base and “rotate
and lock” Adapter Plate for attaching Sensor. Compatible with most
standard surface-mounting raceways; also suitable for mounting
Sensors to standard octagonal
J box
Optional Performance Features
(Models with -MRW suffix)
• Ambient light override option prevents lights from turning ON when
there is ample natural light
• Secondary Relay — Single-Pole
Double-Throw (SPDT), rated 500
mA @ 24V AC/DC, three-wire
isolated relay
• Secondary Relay can be used to
send control signals to HVAC systems based on occupancy detection
TESTING & CODE COMPLIANCE
• CUL/US Certified
Cat. No. ODC20-M
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
P6
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Occupancy Sensor
Lighting Controls
Ultrasonic Ceiling-Mount Occupancy Sensor (For use with Leviton Power
Pack)* Advanced Ultrasonic sensing technology for highly accurate monitoring with excellent immunity to air
currents and other interference . All-digital self-adjusting technology provides “Install and Forget” solution for
automatic lighting control.
ODC10-U0W
DESCRIPTION
CAT. NO.
COVERAGE
OPERATING
FREQUENCY
COLOR
Ultrasonic Ceiling-Mount
Occupancy Sensor
ODC05-U0W
180°, 500 sq. ft
40kHz
White
Ultrasonic Ceiling-Mount
Occupancy Sensor with Ambient Light
Override and Secondary Relay
ODC05-URW
180°, 500 sq. ft
40kHz
White
Ultrasonic Ceiling-Mount
Occupancy Sensor
ODC10-U0W
180°, 1000 sq. ft
32kHz
White
Ultrasonic Ceiling-Mount
Occupancy Sensor with Ambient Light
Override and Secondary Relay
ODC10-URW
180°, 1000 sq. ft
32kHz
White
Ultrasonic Ceiling-Mount
Occupancy Sensor
ODC20-U0W
360°, 2000 sq. ft
32kHz
White
Ultrasonic Ceiling-Mount
Occupancy Sensor with Ambient Light
Override and Secondary Relay
ODC20-URW
360°, 2000 sq. ft
32kHz
White
Hard-Ceiling Raceway Adapter Kit
ODCRA-000
—
—
Protective Cage for Ceiling-Mount
Occupancy Sensors
ODCCG-000
White
White
—
—
*Low-voltage wiring is used to connect Leviton Occupancy Sensors to Cat. No. ODP20 Power Pack (purchased separately).
See page P11 for Power Pack information.
All devices are CUL/US Certified.
1.40
(35.6 mm)
SPECIFICATIONS & FEATURES
• Ideal for restrooms, office areas with
cubicles, general work space, warehouse and storage facilities, cafeterias and public areas in commercial
facilities
• Ultrasonic sensing for maximum
range and sensitivity combined
with high immunity to false triggering from air currents and other
interference
• Self-adjusting settings continuously
analyze and adjust sensitivity, timer
operation, and air current compensation for reliable, long-term performance
• Automatic dual-mode operation
adjusts to either economy or highsensitivity mode based on actual
occupancy patterns for maximum
energy savings
• Built-in Circadian Calendar —
Provides 4-week learning period
where the sensor monitors occupancy to establish trends that serve
as the basis for automatic operation. During peak occupancy periods the sensor remains in high-sensitivity mode and during low occupancy periods it switches to economy mode.
• Manual Delayed-OFF time settings
of 8, 16, and 32 minutes, with
8-second test mode
• Self-Adjusting Delayed-OFF time
interval settings for 8 to 100 minutes
— Compensates for real-time occupancy patterns, preventing unnecessary ON/OFF switching
• Non-volatile memory preserves all
automatic and manual settings during power outages
• Choice of coverage patterns to suit
a variety of applications
• Small, unobtrusive size (4.5"
diameter) blends in with any décor
• Fast, simple installation using 3
color-coded low-voltage wires and a
single mounting post
• Hard-Ceiling Raceway Adapter Kit
(optional) provides complete solution for mounting occupancy sensors to hard ceilings. Two-piece kit
contains Adapter Base and “rotate
and lock” Adapter Plate for attaching Sensor. Compatible with most
standard surface-mounting raceways; also suitable for mounting
Sensors to standard octagonal
J box
Optional Performance Features
(Models with -URW suffix)
• Ambient light override option prevents lights from turning ON when
there is ample natural light
• Secondary Relay — Single-Pole
Double-Throw (SPDT), rated 500
mA @ 24V AC/DC, three-wire
isolated relay
• Secondary Relay can be used to
send control signals to HVAC systems based on occupancy detection
ø 4.53
(115.1 mm)
Cat. Nos. ODC05-U, ODC010-U
1.40
(35.6 mm)
ø 4.53
(115.1 mm)
TESTING & CODE COMPLIANCE
• CUL/US Certified
Cat. No. ODC20-U
P7
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Occupancy Sensor
Lighting Controls
Commercial Grade
Infrared Ceiling-Mount Occupancy Sensor
(For use with Leviton Power Pack)* Advanced Passive Infrared technology for highly accurate
monitoring in a variety of commercial applications. All-digital self-adjusting technology provides “Install and
Forget” solution for automatic lighting control.
DESCRIPTION
CAT. NO.
COVERAGE
COLOR
Infrared Ceiling-Mount Occupancy Sensor
ODC04-I0W
360°, 450 sq. ft
White
Infrared Ceiling-Mount Occupancy Sensor
with Ambient Light Override and
Secondary Relay
ODC04-IRW
360°, 450 sq. ft
White
Hard-Ceiling Raceway Adapter Kit
ODCRA-000
—
White
Protective Cage for Ceiling-Mount
Occupancy Sensors
ODCCG-000
—
White
ODC04-10W
*Low-voltage wiring is used to connect Leviton Occupancy Sensors to Cat. No. ODP20 Power Pack (purchased separately).
See page P11 for Power Pack information.
All devices are CUL/US Certified.
1.40
(35.6 mm)
ø 4.53
(115.1 mm)
Cat. No. ODC04-I
SPECIFICATIONS & FEATURES
• Ideal for use in small offices, general work areas, closets, restrooms,
and other small areas in commercial
facilities
• Self-adjusting settings continuously
analyze and adjust infrared sensitivity, timer operation, and air current
compensation for reliable, long-term
performance
• Automatic dual-mode operation
adjusts to either economy or highsensitivity mode based on actual
occupancy patterns for maximum
energy savings
• Built-in Circadian Calendar —
Provides 4-week learning period
where the sensor monitors occupancy to establish trends that serve
as the basis for automatic operation. During peak occupancy periods the sensor remains in high-sensitivity mode and during low occupancy periods it switches to economy mode.
• Manual Delayed-OFF time settings
of 8, 16, and 32 minutes, with
8-second test mode
• Self-Adjusting Delayed-OFF time
interval settings for 8 to 100 minutes
— Compensates for real-time occupancy patterns, preventing unnecessary ON/OFF switching
• Non-volatile memory preserves all
automatic and manual settings during power outages
• Small, unobtrusive size (4.5" diameter) blends in with any décor
• Fast, simple installation using 3
color-coded low-voltage wires and a
single mounting post
• Hard-Ceiling Raceway Adapter Kit
(optional) provides complete solution for mounting occupancy sensors to hard ceilings. Two-piece kit
contains Adapter Base and “rotate
and lock” Adapter Plate for attaching Sensor. Compatible with most
standard surface-mounting raceways; also suitable for mounting
Sensors to standard octagonal
J box
Optional Performance Features
(Models with -IRW suffix)
• Ambient light override option prevents lights from turning ON when
there is ample natural light
• Secondary Relay — Single-Pole
Double-Throw (SPDT), rated 500
mA @ 24V AC/DC, three-wire
isolated relay
• Secondary Relay can be used to
send control signals to HVAC systems based on occupancy detection
TESTING & CODE COMPLIANCE
• CUL/US Certified
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
P8
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Commercial Grade
Occupancy Sensor
Lighting Controls
Multi-Technology Wall-Mount Occupancy Sensor (For use with Leviton
Power Pack)* Advanced motion sensors combine infrared and ultrasonic technology for highly accurate
monitoring without false triggering. All-digital self-adjusting technology provides “Install and Forget” solution
for automatic lighting control
ODW12-M0W
DESCRIPTION
CAT. NO.
COVERAGE
OPERATING
FREQUENCY
COLOR
Multi-Tech Wall-Mount
Occupancy Sensor
ODW12-M0W
110°, 1200 sq. ft
32kHz
White
Multi-Tech Wall-Mount
Occupancy Sensor with Ambient Light
Override and Secondary Relay
ODW12-MRW
110°, 1200 sq. ft
32kHz
White
*Low-voltage wiring is used to connect Leviton Occupancy Sensors to Cat. No. ODP20 Power Pack (purchased separately).
See page P11 for Power Pack information.
All devices are CUL/US Certified.
• Ideal for conference rooms, stairwells, high-ceiling rooms, open
areas, storage rooms and classrooms. Also ideal for corner mounting in a variety of applications.
• Ultrasonic sensing for maximum
sensitivity combined with Passive
Infrared (PIR) sensing to prevent
false triggering from air conditioning
and corridor activity
• Adjustable swivel neck rotates 80°
vertically and 60° horizontally— Can
be used for ceiling or wall mounting
• Self-adjusting settings continuously
analyze and adjust infrared sensitivity, timer operation, and air current
compensation for reliable, long-term
performance
• Automatic dual-mode operation
adjusts to either economy or highsensitivity mode based on actual
occupancy patterns for maximum
energy savings
• Built-in Circadian Calendar—
Provides 4-week learning period
where the sensor monitors occupancy to establish trends that serve
as the basis for automatic operation. During peak occupancy periods the sensor remains in high-sensitivity mode and during low occupancy periods it switches to economy mode.
• Manual Delayed-OFF time settings
of 4, 8, 16, and 32 minutes, with
8-second test mode
P9
• Self-Adjusting Delayed-OFF time
interval settings for 4 to 100 minutes—Compensates for real-time
occupancy patterns, preventing
unnecessary ON/OFF switching
• Non-volatile memory preserves all
automatic and manual settings during power outages
• Fast, simple installation using 3
color-coded low-voltage wires and a
single mounting post
Optional Performance Features
(Models with -MRW suffix)
• Ambient light override option prevents lights from turning ON when
there is ample natural light
• Secondary Relay—Single-Pole
Double-Throw (SPDT), rated 500
mA @ 24V AC/DC, three-wire
isolated relay
• Secondary Relay can be used to
send control signals to HVAC systems based on occupancy detection
TESTING & CODE COMPLIANCE
• CUL/US Certified
5.29 (134.4 mm)
SPECIFICATIONS & FEATURES
6.58 (167.1 mm)
ø 3.63
(92.2 mm)
3.72
(94.5 mm)
2.73
(69.3 mm)
Cat. No. ODW12-M
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Occupancy Sensor
Lighting Controls
Commercial Grade
Infrared Wide-View and High-Bay Wall Mount Occupancy Sensors
(For use with Leviton Power Pack)* Advanced Passive Infrared technology for highly accurate
monitoring in a variety of commercial applications. All-digital self-adjusting technology provides “Install and
Forget” solution for automatic lighting control.
Wide-View
DESCRIPTION
CAT. NO.
COVERAGE
COLOR
Infrared Wide-View Wall-Mount
Occupancy Sensor
ODWWV-I0W
110°, 2500 sq. ft
White
Infrared Wide-View Wall-Mount
Occupancy Sensor with Ambient Light
Override and Secondary Relay
ODWWV-IRW
110°, 2500 sq. ft
White
DESCRIPTION
CAT. NO.
COVERAGE
COLOR
Infrared High-Bay Wall-Mount
Occupancy Sensor
ODWHB-I0W
120 ft, 14 ft wide
@ 30 ft height
White
Infrared High-Bay Wall-Mount
Occupancy Sensor with Ambient Light
Override and Secondary Relay
ODWHB-IRW
120 ft, 14 ft wide
@ 30 ft height
White
High-Bay
ODWWV-I0W, ODWHB-I0W
*Low-voltage wiring is used to connect Leviton Occupancy Sensors to Cat. No. ODP20 Power Pack (purchased separately).
See page P11 for Power Pack information.
All devices are CUL/US Certified.
5.29 (134.4 mm)
6.58 (167.1 mm)
ø 3.63
(92.2 mm)
3.72
(94.5 mm)
2.73
(69.3 mm)
Cat. Nos. ODWWV-I, ODWHB-I
SPECIFICATIONS & FEATURES
• ODWWV-I: Ideal for conference
rooms, stair-wells, high-ceiling
rooms, large open areas, parking
garages, storage rooms and rooms
with pendant fixtures. Also ideal for
corner mounting in a variety of
applications.
• ODWHB-I: Ideal for monitoring long,
narrow spaces such as warehouse
aisles, hallways, stairways, any
narrow room, closets and storage
areas. Also ideal for corner mounting in a variety of applications.
• Self-adjusting settings continuously
analyze and adjust infrared sensitivity, timer operation, and air current
compensation for reliable, long-term
performance
• Adjustable swivel neck rotates 80°
vertically and 60° horizontally—Can
be used for ceiling or wall mounting
• Automatic dual-mode operation
adjusts to either economy or highsensitivity mode based on actual
occupancy patterns for maximum
energy savings
• Built-in Circadian Calendar—
Provides 4-week learning period
where the sensor monitors occupancy to establish trends that serve
as the basis for automatic operation. During peak occupancy
periods the sensor remains in highsensitivity mode and during low
occupancy periods it switches to
economy mode.
• Manual Delayed-OFF time settings
of 4, 8, 16, and 32 minutes, with
8-second test mode
• Self-Adjusting Delayed-OFF time
interval settings for 4 to 100 minutes
— Compensates for real-time occupancy patterns, preventing unnecessary ON/OFF switching
• Non-volatile memory preserves all
automatic and manual settings during power outages
• Fast, simple installation using 3
color-coded low-voltage wires and a
single mounting post
Optional Performance Features
(Models with -IRW suffix)
• Ambient light override option prevents lights from turning ON when
there is ample natural light
• Secondary Relay—Single-Pole
Double-Throw (SPDT), rated 500
mA @ 24V AC/DC, three-wire isolated relay
• Secondary Relay can be used to
send control signals to HVAC systems based on occupancy detection
TESTING & CODE COMPLIANCE
• CUL/US Certified
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
P10
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Occupancy Sensor
Lighting Controls
Commercial Grade
Power Packs for Occupancy Sensors (For use with Leviton Occupancy
Sensors listed on pages P6–P10)* Leviton Power Pack units contain both a 24V DC power supply
for Occupancy Sensors and a relay for switching incandescent or fluorescent ballast lighting loads. Add-A-Relay
units can be used to expand control capability. Compact, lightweight Power Pack and Add-A-Relay units are
easily mounted inside or outside a junction box or inside a fluorescent ballast cavity.
ODP20-010
DESCRIPTION
CAT. NO.
POWER
INPUT
RELAY
RATING
CONTROL
INPUT
POWER
SUPPLY
OUTPUT
Power Pack, 120V
ODP20-010
120V AC 60Hz
13A Incandescent, 5mA, 24V DC
20A Fluorescent
Power Pack, 230V
ODP20-020
230V AC 50 & 60Hz 20A Fluorescent
5mA, 24V DC
100mA, 24V DC
Power Pack, 277V
ODP20-070
277V AC 60Hz
20A Fluorescent
5mA, 24V DC
100mA, 24V DC
Power Pack, 347V
ODP15-030
347V AC 60Hz
15A Fluorescent
5mA, 24V DC
100mA, 24V DC
Add-A-Relay Unit
ODA00-000
—
All Ratings
Listed Above
5mA, 24V DC
—
100mA, 24V DC
All devices are CUL/US Certified.
Power Pack Adapter
DESCRIPTION
CAT. NO.
Low-Voltage Nipple Adapter with 1/2" Lock Nut
for Power Pack and Add-A-Relay units
ODPNA
Power Pack Capacity Guide
One Leviton Power Pack will supply power for a combination of up
to 3 devices (Sensors and Add-A-Relay units) in the following configurations listed below.
Allowable Load Configurations
Power Pack
• For use with the following Leviton
Occupancy Sensors: ODC20-M,
ODC10-M, ODC05-M, ODC20-U,
ODC10-U, ODC05-U, ODC04-I,
ODW12-M, ODWWV-I and
ODWHB-I
• Self-contained power supply for
occupancy sensors and switching
relay for lighting loads
• Provides 24V DC 100 mA nominal,
full-wave rectified and filtered power
for occupancy sensors and Add-ARelay units (see Power Pack
Capacity Guide)
• Available in 120VAC, 230VAC,
277VAC and 347VAC versions with
relay contacts rated for incandescent or lighting ballast loads
• Compact size and light weight
(15-oz.) allows easy mounting
through knockout in junction box
(from either inside or outside the
box) with a simple twist-on nut.
Also mounts inside fluorescent
ballast cavity.
Number of Add-A-Relay Units
1
0
2
0
3
0
1
1
2
1
1
2
Add-A-Relay
• Expands Power Pack load capacity
by functioning as a supplementary
relay
• Provides ability to switch loads in
different voltage systems (For
example, switching 120V incandescent loads in a 277V fluorescent
system and vice versa)
• Compatible with electronic ballasts
• Same compact size and mounting
features as Power Pack
Nipple Adapter
• Simplifies the connection of any
OD-series Occupancy Sensor to the
low-voltage side of a Power Pack
mounted inside a fluorescent ballast
cavity
• 1/2" conduit lock nut included
2.35
(59.7 mm)
TESTING & CODE COMPLIANCE
• Power Pack Units are CUL/US
Certified
• Backed by a Limited Five-Year
Warranty
COLOR
Power Pack and Add-A-Relay devices
are black.
P11
1.38
(35.1 mm)
3.66 (93.0 mm)
SPECIFICATIONS & FEATURES
Number of Occupancy Sensors
ALL POWER PACK AND ADD-A-RELAY UNITS
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Occupancy Sensor
Lighting Controls
Commercial Grade
Outdoor Motion Sensors
Passive Infrared (PIR) outdoor motion sensor provide outstanding value in security lighting, convenience, safety
and energy savings for a wide range of commercial and residential applications.
Commercial Grade
DESCRIPTION
CAT. NO.
RATING
COVERAGE
COLOR
Professional Series Outdoor
PIR Motion Sensor
PS200-10
Incandescent: 1000W @ 120V.
Fluorescent/Inductive:
500VA @ 120V. For 60Hz AC only
200°
W, B
Professional Series Outdoor
PIR Motion Sensor with
Dual Floodlights
PS200-1F
Incandescent: 1000W @ 120V.
Fluorescent/Inductive:
500VA @ 120V. For 60Hz AC only
Professional Series Outdoor
PIR Motion Sensor
PS110-10
Incandescent: 1000W @ 120V.
Fluorescent/Inductive:
500VA @ 120V. For 60Hz AC only
110°
W, B
Professional Series Outdoor
PIR Motion Sensor with
Dual Floodlights
PS110-1F
Incandescent: 1000W @ 120V.
Fluorescent/Inductive:
500VA @ 120V. For 60Hz AC only
110°
W, B
DESCRIPTION
CAT. NO.
RATING
COVERAGE
Residential Series Outdoor
PIR Motion Sensor
RS110-10
Incandescent: 500W @ 120V.
Fluorescent/Inductive:
500VA @ 120V. For 60Hz AC only
110°
W, B
Residential Series Outdoor
PIR Motion Sensor with
Dual Floodlights
RS110-1F
Incandescent: 500W @ 120V.
Fluorescent/Inductive:
500VA @ 120V. For 60Hz AC only.
110°
W, B
Residential Series Outdoor
PIR Motion Sensor with
Dual Floodlights
RS110-2FW
Incandescent: 500W @ 220V.
Fluorescent/Inductive:
500VA @ 220V. For 50Hz AC only.
110°
W only
W, B
200°
PS2000
Residential Grade
COLOR
All devices are UL Listed and CSA Certified.
SPECIFICATIONS & FEATURES
9.16 (232.7 mm)
2.48
(63.0 mm)
4.50 (114.3 mm)
5.36 (136.1 mm)
Cat. No. PS2000
Professional Series
• Ideal for a wide range of
commercial/industrial settings including parking areas, storage facilities,
warehouses, loading docks, marina,
garages, walkways, campus
grounds, meat lockers, walk-in refrigerators/freezers and outbuildings
• Adjustable Delayed-OFF time
settings from 20 seconds (for test
mode) to 15 minutes
• Adjustable sensitivity and immunity to
RFI signals reduces false triggers
• Ambient light override prevents lights
from turning ON when there is ample
natural light
• Provides Automatic, Test and
Continuous Modes—Test mode simulates automatic operation with short
delayed-OFF time for ease of making
adjustments. Continuos mode
enables manual override for constant
“lights ON” operation (when used with
standard ON/OFF switch)
• Surge suppression minimizes likelihood of damage due to electrical
surges
• Temperature compensation feature
ensures uniform performance in
extreme hot or cold weather and
during temperature fluctuations
• Sensor neck adjustment allows accurate area monitoring: 110° vertical,
180° horizontal, 110° rotational
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
Residential Series
• Ideal for a wide range of residential
settings including backyards,
garages, entranceways, porches,
swimming pool areas, doorways and
private docks
• Sensor neck adjustment allows accurate area monitoring: 110° vertical,
180° horizontal, 110° rotational
• Adjustable Delayed-OFF time settings from 20 seconds (for test mode)
to 15 minutes
• Adjustable sensitivity reduces false
triggers
• Provides Automatic, Test and
Continuous Modes—Test mode simulates automatic operation with short
delayed-OFF time for ease of making
adjustments. Continuos mode
enables manual override for constant
“lights ON” operation (when used
with standard ON/OFF switch)
TESTING & CODE COMPLIANCE
• UL Listed
• CSA Certified
COLOR
Colors available as listed. For color selections, add suffix to catalog numbers as
follows: White (-W) and Brown (-B).
P12
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
How To Use This Catalog
This edition of the Leviton Wiring Device Catalog has been re-designed to help you find the device you’re seeking in the quickest
and easiest way possible. To achieve this, each Section (A, B, C, etc.) has been divided into three distinct portions in the following
sequence—Industrial Grade first, Commercial Grade second, Residential Grade third—and grouped according to their amperage
and voltage, lowest to highest. (Some product classes may have slight differences.) If you need to place an order for any quantity
of 15 Amp, 125 Volt, Industrial Grade duplex receptacles with back and side wiring, you would begin your search for the right
Leviton product with the Table of Contents. Here you’ll see that all receptacles are listed in Section D. Turning to Section D, you’ll
find that product descriptions now lead off each listing, so that you’ll be able to understand what the device is about, functionally,
in relation to your needs. Product description, in turn, is followed by Amps and catalog numbers for ordering purposes. To assist
you further, such helpful highlights as Specifications & Features, Testing & Code Compliance, Color listing, Material
Characteristics, color
photos and dimensional drawings virtually fill each page. Four-color photographs have been added throughout the catalog to
provide you with an enhanced view of the Leviton product line.
Any page in this L-504 Catalog can be used as a specificer sheet or as part of a presentation; and any page can be clearly faxed
to customers and prospects. Product classes may also be pinpointed in the Quick Reference Guide following the Table of
Contents. After turning to the proper page, you would locate the catalog number for the item that corresponds to your needs,
along with basic information about similar items. Wiring diagrams, NEMA Configuration Charts, Electrical Industry Definitions,
ANSI Architectural Symbols, and other related information can be found in the Technical Section (U). Specific product catalog
A
Straight Blade Receptacles
Industrial Grade
E
D
Back and Side Wired (Basic Cat. No. Denotes Brown Device*)
DESCRIPTION
B
C
CAT. NO./COLOR
15A/125V
G
G
5-15R
5262-I
• Impact-resistant thermoplastic nylon
cover and body
• Smooth face does not collect dirt
• Four corner latches securely fasten face
• Locked-in mounting strap
• Large, triple-wipe, brass “T” contacts for
superior contact and conductivity
W
6-15R
5-20R
G 5462
5662
I
5362
I, W, GY, R, E
Single Receptacle
5261
I, W, GY
5661
I
5361
I, W, GY, A, E
5461
I, A, GY
Narrow Body
Duplex Receptacle
5252
I, W (No Brown)
—
5352
I, W (No Brown)
—
5361-CH
Stainless Steel
—
HSingle
g
p
Receptacle,
I
5261-CH
Stainless Steel
—
I, W
I
I, GY
Back and Side Wired Dual Voltage (Basic Cat. No. Denotes Brown Device*)
DESCRIPTION
RATING
CAT. NO.
COLOR
Duplex Receptacle
15A 125V/15A 250V
5292
I
I
All devices are UL Listed and CSA Certified.
1.09 (27.7 mm)
1.56 (39.6 mm)
K
Basic Cat. Nos. shown above denote Brown
device. For other color selections, add suffix
to the catalog number as follows: Ivory (-I),
White (-W), Brown , Almond (-A), Gray (-G or
-GY), Black (-E), Red (-R) and Blue (-BU).
3.28 (83.3 mm)
2.38 (60.3 mm)
4.06 (103.2 mm)
4.06 (103.2 mm)
J
3.27 (83.1 mm)
2.78 (70.6 mm)
*COLOR
G
6-20R
5262
I, W, GY, R, E
TESTING & CODE COMPLIANCE
• UL Listed 498 (UL File #13399); UL
Federal Specification WC-596
• CSA Certified where applicable
(CSA File #LR-406)
• NOM Certified (#057)
• Backed by a Limited 10-Year Warranty
G
W
Duplex Receptacle,
Brass Strap
Clockhanger
SPECIFICATIONS & FEATURES
F
CAT. NO./COLOR CAT. NO./COLOR CAT. NO./COLOR
15A/250V
20A/125V
20A/250V
0.84 (21.4 mm)
1.31 (33.3 mm)
1.06 (27.0 mm)
BACK & SIDE WIRED
Cat. No. 5252
SINGLE RECEPTACLE
Cat. No. 5361
A Choose GRADE, if appropriate
E Select RATING and WIRING
I TESTING & CODE COMPLIANCE
B PHOTOGRAPH
F Check for NEMA CONFIGURATION
J COLOR LISTING
C Check for SINGLE or DUPLEX
G COLOR ABBREVIATIONS
H SPECIFICATIONS & FEATURES
K DIMENSIONAL ILLUSTRATIONS
MATERIAL CHARACTERISTICS
Environmental: Flammability, Rated V2
D Find AMPERAGE
P13
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement