The Theragun mini™
See warnings insert for important
safety instructions
Ergonomic grip
Multi-functional power/ speed button
LED battery indicator light
LED speed indicator
Charging port
Interchangeable attachment connector
Using the Theragun mini
1. To turn on the Theragun mini, firmly press and hold the multi-functional power/
speed button on the right side of the device.
2. Float the device across areas in need of treatment, gradually applying light to
moderate pressure as needed.
3. Press the power/speed button again to toggle between 3 speeds.
4. To turn off the Theragun mini, firmly press and hold the power/speed button until
the device shuts off.
Connecting the attachment
Ensure that your device is powered off before connecting or
removing any attachments. Align the attachment with the tip of
the arm and push to connect. To remove the attachment, hold
the top of the device with one hand, and the attachment with the
other hand. Place one finger on each side of the plastic connector
and firmly pull off the attachment. Warning: Do not place your
finger between the attachment and the end of the arm, as this
may cause pinching or injury.
Your Theragun mini comes with a Standard Ball attachment
designed for overall use. It is also compatible with all available
attachments, excluding those exclusive to the first-generation
Theragun liv.
Charging the Theragun mini
1. After turning off the device, plug the power adapter into the charging port of the
Theragun mini.
2. The LED light on the power/speed button will flash until fully charged.
3. Charging is complete when the LED light on the power/speed button is solid green.
4. Battery level is continuously displayed on the LED light of the power/speed button
when the device is on. To view battery level when the device is off, briefly press the
power/speed button and the LED battery light will flash to indicate the battery level.
Battery Level
Flashing red: Low charge
Battery level on the
Theragun mini is indicated
with the following colors:
Flashing blue: Half-way charged
Flashing green: High charge
Solid green: Fully charged
Cleaning the Theragun mini
For the most hygienic Theragun device experience, sanitize it after each use by:
1.
2.
Wiping the device with a disinfectant wipe to remove any residue.
Once the device is residue-free, use a new wipe to disinfect the surface area
by wiping all sides in a downward motion.
">