User manual | G3 D LVB24 3

G3…(D) 3-way Globe Valve, Bronze Trim
Application
This valve is typically used in Air Handling Units on heating or cooling coils and Fan Coil
Unit heating or cooling coils. Some other common applications include Unit Ventilators, VAV Box reheat coils and bypass loops. This valve is suitable for use in a hydronic
system with constant or variable flow.
3-way valves are available with mixing or diverting flow patterns.
N40021 - 03/13 - Subject to change. © Belimo Aircontrols (USA), Inc.
bronze
bronze
stainless steel
brass
spring loaded TFE
none
ANSI 250 (up to 400 psi below 150°F)
ANSI III
SVK Series
LVK
Series
LF
Series
A
Valve Body
G314
G315(D)
G320(D)
G325(D)
G332(D)
G340(D)
G350(D)
*(50% or more open)
G3…D 3-way Diverting Valve
A
Stem Up- Open B to AB
Dimensions
B
20°F to 250°F (-7°C to 120°C)
35 psi (241 kPa)
500:1
G314, G315(D)
2 lbs
G320
3 lbs
G320D
2.5 lbs
G325, G332(D)
2.5 lbs
G325D
5 lbs
G340(D), G350(D)
14 lbs
G3...(D) 3-way Flow Patterns
G3 3-way Mixing Valve
G314
G315(D)
G320(D)
G325(D)
G332(D)
G340(D)
G350
G350(D)
D078-3W
G3
G3...D
chilled or hot water, 60% glycol
linear
stem up - open B to AB
stem up - open B to AB
½” to 2”
NPT female ends
15
15
20
25
32
40
50
50
AF(X)
Series
Service
Flow characteristic
Action
Sizes
End fitting
Materials
Body
Seat
Stem
Plug
Packing
Disc
ANSI class
Leakage
Media temperature
water
Maximum ΔP* water
Rangeability
Valve weights
½
½
¾
1
1¼
1½
2
2
2.2
4.4
7.5
14
20
28
41
40
3-way NPT
Suitable Actuators
Spring
Electronic
Fail- Safe
NF
Technical Data
Inches DN [mm]
NonSpring
SV Series
Cv
Type
LV
Series
Valve Nominal Size
Valve Nominal Size
Inches DN [mm]
½”
15
½”
15
¾”
20
1”
25
1¼”
32
1½
40
2
50
Dimensions (Inches [mm])
A
B
3.06” [78]
3.06” [78]
3.62” [92]
4.62” [117]
4.62” [117]
5.37” [137]
6.12” [156]
1.37” [35]
1.37” [35]
1.68” [43]
1.56” [40]
1.62” [41]
1.62” [41]
1.87” [48]
Piping
The valves should be mounted in a weather-protected area in a location that is within
the ambient limits of the actuator. Allow sufficient room for valve with actuator and
for service. Please allow 12” for complete actuator/linkage removal. The G2(S) and
G3(D) preferred mounting position of the valve is with the valve stem vertical above
the valve body, for maximum life. However, the assemblies can be mounted with the
valve stem vertical or horizontal in relation to the pipe. The actuators should never be
mounted underneath the valve, as condensation can build up and result in a failure of
the actuators. Do not reverse flow direction.
Stem Up- Open B to AB
Note: Flow B to A travels through center of plug
(as shown).
800-543-9038 USA
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
9
LVB24-3
On/Off, Floating Point, Non-Spring Return, Linear, 24 V
Application
For On/Off and floating control types of globe valves in HVAC steam and hydronic
systems.
Actuator sizing will be dictated by the valve size selection. All valve selections should
be done in accordance with the flow parameters and system specifications. The
actuator is mounted directly to the globe valve bonnet by means of its universal clamp
and collar.
The actuator operates in response to a 24 volt signal being applied from an electronic
controller or positioner.
Operation
The actuator is not provided with and does not require any limit switches, but is
electronically protected against overload. The LV series provides 15 mm of downward
travel and a visual indicator indicates position of the actuator. When reaching the valve
end position, the actuator automatically stops. The gears can be manually disengaged
with a button on the actuator cover.
The LV… series actuators use a sensorless brushless DC motor. The ASIC inside
monitors and controls the actuator’s rotation and provides a digital rotation sensing
(DRS) function to prevent damage to the actuator in a stall condition. Power
consumption is reduced in holding mode.
Technical Data
Noise level
Servicing
Quality standard
Weight
Dimensions (Inches [mm])
7.8” [199]
1.8” [45]
3.9” [98]
† Use flexible metal conduit. Push the Listed conduit fitting device over the actuator’s cable to butt against
the enclosure. Screw in conduit connector. Jacket the actuators input wiring with Listed flexible conduit.
Properly terminate the conduit in a suitable junction box. Rated impulse Voltage 800V. Type of action 1.
Control Pollution Degree 3.
800-543-9038 USA
249
866-805-7089 CANADA
203-791-8396 LATIN AMERICA / CARIBBEAN
P10401 - 01/13 - Subject to change. © Belimo Aircontrols (USA), Inc.
Humidity
Ambient temperature
Storage temperature
Housing
Housing material
Agency listings†
Add-on auxiliary switches are easily fastened directly onto the actuator body for
signaling and switching functions.
5.9” [150]
Overload protection
Electrical protection
Control
Operating Range Y
Input impedance
Feeback Output U
Stroke
Linear Force
Direction of rotation
Position indication
Manual override
Running time motor
24 VAC ± 20% 50/60 Hz, 24 VDC ± 10%
2W
0.5 W
5 VA (class 2 power source)
3 ft, 18 GA plenum rated cable with 1/2"
conduit connector protected NEMA 2 (IP54)
electronic throughout full stroke
actuators are double insulated
on/off, floating point
on/off, floating point
100 k  (0.1 mA), 500 , 1000  (on/off)
No Feedback
0.6" [15 mm]
112 lbf [500 N]
reversible with switch
stroke indicator on bracket
4 mm hex crank (shipped with actuator)
90 seconds (default), variable (90 to 150
seconds)
5 to 95% RH non condensing
-22°F to +122°F [-30°C to +50°C]
-40°F to +176°F [-40°C to +80°C]
NEMA 2, IP54, UL enclosure type 2
Aluminum die cast and plastic casing
cULus acc. to UL 60730-1A/-2-14,
CAN/CSA E60730-1:02,
CE acc. to 2004/108/EC and 2006/95/EC
<55dB(A)
maintenance free
ISO 9001
2.9 lbs
6” [152]
Power supply
Power consumption running
Power consumption holding
Transformer sizing
Electrical connection
LVB24-3
On/Off, Floating Point, Non-Spring Return, Linear, 24 V
Typical Specification
Wiring Diagrams
On/Off, floating control globe valve actuators shall be electronic and direct coupled to
the globe valve bonnet via an integrated linkage, which requires no secondary linkage
and be capable of mounting to valves ½” to 2” in size. Actuators must provide control
in response to a control input from an electronic controller or positioner. Actuators shall
have brushless DC motor technology and be protected from overload at all angles of
rotation. Actuators shall have reversing switch and manual override on the cover. Run
time shall be constant and independent of torque. Actuators shall be cULus listed,
have a 5-year warranty, and be manufactured under ISO 9001 International Quality
Control Standards. Actuators shall be as manufactured by Belimo.
CAUTION Equipment Damage!
2
Actuators may be connected in parallel. Power consumption and input
impedance must be observed.
3
Actuators may also be powered by 24 VDC.
1
18
Actuators with plenum cable do not have numbers; use color codes instead.
Meets cULus or UL and CSA Standard requirements without the
need of an electrical ground connection.
WARNING
G Live Electrical Components!
During installation, testing, servicing and troubleshooting of this product, it may be
necessary to work with live electrical components. Have a qualified licensed electrician or other
individual who has been properly trained in handling live electrical components perform these
tasks. Failure to follow all electrical safety precautions when exposed to live electrical components could result in death or serious injury.
24 VAC Transformer
2
3
18
Blk (1) Common
Line
Volts
Red (2) +
Wht (3) +
On/Off
Line
24 VAC Transformer (AC only)
P10401 - 01/13 - Subject to change. © Belimo Aircontrols (USA), Inc.
Volts
2
Hot
Com
Blk (1) – Common
Red (2) + Hot
Wht (3) Y1 Input
Controller
Triac Sink
Line
24 VAC Transformer (AC only)
Volts
2
Hot
Com
Blk (1) – Common
Red (2) + Hot
Controller
Wht (3) Y1 Input
Triac Source
800-543-9038 USA
866-805-7089 CANADA
203-791-8396 LATIN AMERICA / CARIBBEAN
250
Close-Off Pressures (psi)
G2/G3 Non-Spring Return, Spring Return, and Electronic Fail-Safe
Non-Spring Return
LV
2-way
G212(S)
G213(S)
G214(S)
G215(S)
G219(S)
G220(S)
G224(S)
G225(S)
G232(S)
G240(S)
G250(S)
SV
250
250
250
250
211
211
Spring Return
LF
G315
G320
G325
G332
G340
G350
LVK
207
207
236
159
85
210
120
250
210
250
250
211
210
140
250
250
250
250
220
140
250
236
159
85
210
120
250
250
250
250
250
250
250
250
250
250
250
250
N40021 - 03/13 - Subject to change. © Belimo Aircontrols (USA), Inc.
250
250
250
250
SVK
250
250
250
250
211
211
220
220
140
250
236
159
85
3-way Diverting
G315D
G320D
G325D
G332D
G340D
G350D
Electronic Fail-Safe
AFB
250
250
250
250
140
140
250
250
236
159
85
3-way Mixing
G314
NF
800-543-9038 USA
88
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
Close-Off Pressures (psi)
G6/G7 Non-Spring Return, Spring Return, and Electronic Fail-Safe
Non-Spring Return
N40021 - 03/13 - Subject to change. © Belimo Aircontrols (USA), Inc.
EV
RV
Spring Return
AF
2-way Pressure Comp ANSI 125
G665C
G680C
G6100C
G6125C
G6150C
140
140
140
140
140
140
140
2-way Pressure Comp ANSI 125
G665CS, G665LCS
G680CS, G680LCS
G6100CS, G6100LCS
G6125CS, G6125LCS
G6150C, G6150LCS
125
125
125
125
125
125
125
2-way Pressure Comp ANSI 250
G665C-250
G680C-250
G6100C-250
G6125C-250
G6150C-250
310
310
310
310
244
310
280
2-way Pressure Comp ANSI 250
G665CS-250, G665LCS-250
G680CS-250, G680LCS-250
G6100CS-250, G6100LCS-250
G6125CS-250, G6125LCS-250
G6150CS-250, G6150LCS-250
250
250
250
250
244
250
250
3-way ANSI 125 Mixing
G765, G765S
G780, G780S
G7100, G7100S
G7125, G7125S
G7150, G7150S
3-way ANSI 250 Mixing
G765-250, G765S-250
G780-250, G780S-250
G7100-250, G7100S-250
G7125-250, G7125S-250
G7150-250, G7150S-250
3-way ANSI 125/250 Diverting
G765D, G765DS, G765DS-250
G780D, G780DS, G780DS-250
G7100D, G7100DS, G100DS-250
G7125D, G7125DS, G7125DS-250
G7150D, G7150DS, G7150DS-250
800-543-9038 USA
Electronic Fail-Safe
2*AF
AVK
140
140
110
140
140
140
140
140
125
125
125
110
125
125
125
125
125
280
185
110
310
310
310
232
150
250
185
110
250
250
250
232
150
2*GK
250
94
63
33
125
125
68
42
28
40
26
100
68
12
71
47
125
125
37
94
63
33
185
125
68
42
28
40
26
100
68
12
71
47
222
152
37
22
14
140
140
140
140
175
140
140
140
140
140
140
140
175
866-805-7089 CANADA
203-791-8396 LATIN AMERICA
89

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project