Specifications MAC 350 Entour Photometric Data Total output: 8000 lm Color temperature: 6500 K CRI (color rendering index): 70 Efficiency: 55% Efficacy: 18.6 lumens per watt Dynamic Effects Shutter effect: Electronic, with regular and random pulse, burst and strobe effects Electronic dimming: 0 - 100%, choice of four dimming curves Color wheel: 8 interchangeable dichroic filters + open, full and split colors, music trig, continuous rotation, random color Rotating gobo wheel: 6 interchangeable gobos + open, indexing, continuous gobo rotation & scrolling, shake Iris: Motorized, with pulse and random effects Focus: 2 m (6.6 ft.) to infinity Pan: 540° Tilt: 257° Adjustable pan/tilt and effects speed Construction Color: Black Housing: UV-resistant fiber-reinforced composite and die-cast aluminum Protection rating: IP20 Optics Light source: 7 x Luminus CBT-90 (50 W) LEDs Minimum LED lifetime: 60 000 hours (to >70% luminous output)* *LED manufacturer´s figure obtained under manufacturer´s test conditions Control and Programming Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 14/17 Setting and addressing: Control panel with LED display Macro programs: 10 pan/tilt and 10 effects macros, all with staggered start/chase feature Macro selection: DMX or onboard control panel Movement control options: Tracking and vector Protocol: USITT DMX512/1990 Stand-alone memory: 100 scenes Stand-alone and master/slave programming: Control panel with LED display Transceiver: RS-485 Fixture software update: Serial upload via DMX link 16-bit control: Rotating gobo indexing, pan & tilt Installation Mounting points: 2 pairs of 1/4-turn locks Orientation: Any Minimum distance to combustible materials: 200 mm (7.9 in.) Minimum distance to illuminated surfaces: 0.5 m (1.6 ft.) Connections AC power input: Neutrik PowerCon DMX data in/out: 5-pin locking XLR Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Main fuses: 10 AT (slow blow) x 2 Standby power: Max. 49 W (idle mode, dimmed to zero) Thermal Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C (104° F): 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 1580 BTU/hr. Approvals EU safety: EN 60598-2-17, EN 62471 EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547 US safety (pending): UL 1573 US EMC: FCC Part 15 Class A Canadian safety (pending): CAN/CSA E 598-2-17 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241 Included Items Two Omega clamp attachment brackets with 1/4-turn fasteners: P/N 91602001 Neutrik PowerCon NAC3FCA male input connector: P/N 05342804 Two 10 AT main fuses (installed): P/N 05021029 User manual Accessories 3-pin male XLR to 5-pin female XLR adaptor: P/N 11820004 5-pin male XLR to 3-pin female XLR adaptor: P/N 11820005 1 m (3.3 ft.) DMX cable, STP, 3-pin male - 3-pin female XLR, IEC/UL-CL: P/N 11820012 2 m (6.6 ft.) DMX cable, STP, 3-pin male - 3-pin female XLR, IEC/UL-CL: P/N 11820011 5 m (16.4 ft.) DMX cable, STP, 3-pin male - 3-pin female XLR, IEC/UL-CL: P/N 11820008 10 m (32.8 ft.) DMX cable, STP, 3-pin male - 3-pin female XLR, IEC/UL-CL: P/N 11820007 20 m (65.6 ft.) DMX cable, STP, 3-pin male - 3-pin female XLR, IEC/UL-CL: P/N 11820009 100 m (328.1 ft.) DMX cable, STP, 3-pin male - 3-pin female XLR, IEC/UL-CL: P/N 11820010 G-clamp: P/N 91602003 Half-coupler clamp: P/N 91602005 Quick trigger clamp: P/N 91602007 T-shaped omega bracket with quarter-turn fasteners: P/N 91602008 Omega bracket: P/N 91602001 Safety wire, universal, safe working load 50 kg (110.2 lbs.): P/N 91604003 Four-unit flightcase for 4 x MAC 350: P/N 91510160 Ordering Information MAC 350 Entour, black, in cardboard box: P/N 90231400 Martin Professional Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com About Martin Professional As a world leader in the creation of dynamic lighting solutions for the entertainment, architectural, and commercial sectors, Martin lighting and video systems are renowned the world over. Martin also offers a range of advanced lighting controllers and media servers, as well as a complete line of smoke machines as a complement to intelligent lighting. Martin operates the industry’s most complete and capable distributor network with local partners in nearly 100 countries. Founded in 1987 and based in Aarhus, Denmark, Martin is the lighting division of global infotainment and audio company HARMAN International Industries. HARMAN (www.HARMAN.com) designs, manufactures and markets a wide range of audio and infotainment solutions for the automotive, consumer and professional markets — supported by 15 leading brands, including AKG®, Harman Kardon®, Infinity®, JBL®, Lexicon® and Mark Levinson®. The Company is admired by audiophiles across multiple generations and supports leading professional entertainers and the venues where they perform. More than 25 million automobiles on the road today are equipped with HARMAN audio and infotainment systems. HARMAN’s highly competent workforce is employed across the Americas, Europe and Asia. For more information please visit ©2013 Martin Professional Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice MAC 350 Entour Specifications are subject to change without notice. For the latest product specifications, see www.martin.com Crowded House. All photos Allan Toft Physical Length: 377 mm (14.8 in.) including handles Width (Base): 220 mm (8.7 in.) Height: 454 mm (17.9 in.), head horizontal Height: 471 mm (18.5 in.), head straght up Weight: 16.6 kg (36.6 lbs.) Outstanding effects are possible when combining gobos, focus and full or split colors. The color wheel offers 8 interchangeable color filters plus open. Sets new standards for a hard-edge LED fixture The MAC 350 Entour is the most powerful and energy-efficient LED-based profile moving head fixture on the market to date. It marks a radical advancement in light output and quality compared to other LED profiles on the market. The direct result of a technology grant for the development of new LED technologies, the MAC 350 Entour surpasses what has previously been possible in terms of brightness, efficiency and compactness in a hard-edge LED fixture. The ideal LED profile for all manner of touring and event applications, the MAC 350 Entour is also highly suited to permanent installation in a wide variety of venues. The first real alternative to HID-based profile fixtures As the brightest LED profile on the market to date, light output is exceptional. The MAC 350 Entour delivers 8,000 lumens of output from seven extremely efficient 50 W white LEDs, an output greater than many larger 250/300 watt fixtures and four times more than comparable fixtures. Energy saving Yet the MAC 350 Entour is an energy saving fixture as well. Unlike HID fixtures, it saves on energy by using very little power when the LED sources are not in use and only draws power at the level required. Power consumption is only 450 W with all LEDs at full and only 18 W when idle. Interchangeable colors, fresh designs The MAC 350 Entour houses 8 easily interchangeable dichroic colors with split color effects and continuous rotation. Color filters are easy to change via an easy-access lid. Six continuously rotating and indexable gobos, all new designs, are easy to change via an easy-access lid. Auto or music-triggered shake effects are also possible. Superior optics A superior optical system and variable focus produce crisp images or unfocused background effects with no color artifacts. Optical quality is superior to other products in its class. Beam angle is 25° for a larger projection area, making the fixture ideal for a variety of installation settings like bars, lounges, restaurants and shops. And unlike most fixtures of its size, the beam can be quickly and accurately resized via a motorized iris for longer throws. Image quality is sharp and clean with a deep field of focus that remains sharp when projected at steep angles. Better color rendering The 350 Entour produces an enhanced color spectrum that produces more natural skin tones than many discharge fixtures. Efficiency - eliminates hassles, lowers costs The LED light sources in the MAC 350 Entour have a rated life of 25,000 hours, eliminating any lamp replacement costs for a lower cost of ownership. With better light output and color maintenance over time, the MAC 350 Entour delivers a more consistent look across fixtures. The MAC 350 Entour offers other benefits of LED technology as well like greater reliability, less maintenance and low energy consumption for lower costs over the lifetime of the fixture. Uniform dimming, fast strobe The MAC 350 Entour’s advanced LED technology allows it to dim electronically from 0-100% for perfectly uniform fades with insignificant color shifts. Quiet For noise sensitive environments, the fixture can run in a virtually silent mode if full light intensity is not required. Compact, light, modular The MAC 350 Entour is extremely compact and lightweight with fast pan and tilt movement. An extremely durable and modular construction makes service and maintenance an easier process, saving on costs and total cost of ownership. Instant LED response means there is no limit to the shutter speed for ultra-crisp shutter and fast strobe effects. Flicker free The fixture operates at a very high LED refresh rate, making it completely flicker free for on-camera productions. An efficient fan cooling system draws no dirt or dust into the optics, which along with a quick maintenance and easyaccess design keeps service intervals to a minimum for lower service costs. Control options Industry standard DMX-512 controllable, the MAC 350 Entour also operates in stand-alone mode (with master/ slave) without the need for a lighting controller. For even greater maintenance ease - and savings in time and money - the MAC 350 Entour will support RDM feedback protocol as a future firmware release. The MAC 350 Entour automatically adjusts for different voltages via an auto-sensing SMPS system for full worldwide compatibility. A motorized focus gives sharp projections or out-of-focus effects. Electronic dimming is both uniform and smooth with user-selectable dimmer curves available. Rotational and indexable glass and metal gobos provide great beam and projection effects.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project