Peerless Pump Series F General Purpose End Suction

Peerless Pump Series F General Purpose End Suction
Series F
When Reliability Matters - Trust Peerless
Peerless Pump
General Purpose
End Suction
The Peerless Pump F Series Pumps
are general purpose, frame mounted, end suction pumps
flexibly coupled to drivers and equipped with coupling
guards. Each entire unit can be mounted on a steel base.
An optional drip pan is available.
Applications
Peerless F Series pumps are designed for applications in
medium duty service, providing maximum pump value in
heating and air conditioning, booster and general circulating
service.
Features
The F Series pump is available in cast iron bronze fitted and
all iron construction. Packed boxes or mechanical seals are
available.
Pump casing is fi tted with a bronze/steel replaceable wear
ring. The pipe connection fl anges are equivalent 125# ANSI
flanges rated for 175# Maximum Working Pressure (MWP).
Motor bearings are grease lubricated and are sized for a
minimum of 20,000 hours L10 basic rating life or 100,000
hours median bearing life. Shaft is designed to limit the shaft
deflection to no more than .002” at the seal faces.
Specifications
Capacities: . . . . . . . . Up to 3000 gpm (675 m3/h)
Head: . . . . . . . . . . . . Up to 400 feet (122 m)
Pressure: . . . . . . . . . Up to 175 psi (12.3 kg/cm2, 1,206 kPa)
Horsepower: . . . . . . Up to 125 hp (93 kW)
Temperature: . . . . . . From 32 °F to 250 °F (0 °C to 120 °C)
Drives: . . . . . . . . . . . NEMA Electric Motors
Liquids: . . . . . . . . . . . Water and Light Hydrocarbons
Materials: . . . . . . . . . CI 30 CI, Bronze
The motor/impeller shaft is protected with a replaceable
(bronze/stainless steel) sleeve installed between the shaft
and the packing or mechanical seal.
Mechanical seals are designed for water service and light
hydrocarbons up to 2500 F. Seals are face type with Ni-resist
seat, carbon washer, 18-8 stainless steel metal parts and
Viton elastomers.
Series F pumps are furnished with enclosed dynamically
balanced impellers for smooth, low vibration operation.
The impeller is keyed to the shaft for positive driving and
is secured in place with a stainless steel washer and selflocking cap screw.
The impeller diameter is no more than 90 percent of the
maximum impeller diameter which the case tongue or cutwater could accommodate. This design feature results in
low hydraulic noise levels.
Quality Engineering
Peerless Pump designs tough, versatile products to
meet your pumping needs. The F Series delivers variety,
durability, standardized options and configurations
unequalled in the industry. Please contact your local
authorized Peerless Pump sales office to find out more about
the F Series, options and prices.
Peerless Pump
General Purpose End Suction
F Pump
Unequaled
I
Unrivaled
I
Performance
Peerless Pump - 2005 Dr Martin Luther King Jr Street, Indianapolis, IN 46202
Ph: (317) 925-9661 fax: (317) 924-7388 www.peerlesspump.com www.epumpdoctor.com
l
l
Brochure B-2302 - This brochure’s contents subject to change without notice.
l
Copyright © 2010 Peerless Pump Company
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement