Brother DCP-1600 User`s guide

User’s Guide
DCP-1600
DCP-1601
DCP-1610W
DCP-1615NW
DCP-1616NW
MFC-1900
MFC-1901
MFC-1905
MFC-1910W
MFC-1911NW
MFC-1916NW
Not all models are available in all countries.
Version 0
OCE/ASA
Brother numbers
IMPORTANT
For technical help, you must call Brother customer service or your local Brother dealer.
Register your product
Please complete the Brother Warranty Registration or, for your convenience and most efficient
way to register your new product, register on-line at
http://www.brother.com/registration
Frequently asked questions (FAQs)
The Brother Solutions Center is our one-stop resource for all your machine needs. You can
download the latest drivers, software and utilities, read FAQs and troubleshooting tips to learn
how to get the most from your Brother product.
http://support.brother.com
You can check here for Brother driver updates.
Customer Service
Visit http://www.brother.com for contact information on your local Brother office.
Service center locations
For service centres in Asia and Oceania, contact your local Brother Office. Address and telephone
contact information for Asian and Oceanian offices can be found at http://www.brother.com by
selecting your country.
Internet Addresses
Brother Global website: http://www.brother.com
For Frequently Asked Questions (FAQs), Product Support and Technical Questions, and Driver Updates
and Utilities: http://support.brother.com
©2014 Brother Industries, Ltd. All rights reserved.
i
User's Guides and where do I find them?
Which Guide?
What's in it?
Where is it?
Product Safety
Guide
Read this Guide first. Read the Safety
Instructions before you set up your machine.
See this Guide for trademarks and legal
limitations.
Printed / In the Box
Quick Setup Guide
Follow the instructions for setting up your
machine and installing the drivers and
software for the operating system and
connection type you are using.
Printed / In the Box
User’s Guide
Learn the Fax (MFC models), Scan and
Copy operations. See troubleshooting tips
and machine specifications.
Printed / In the Box
Software and
Network User’s
Guide
This Guide provides instructions for
Scanning, Printing, PC-FAX and other
operations that can be performed by
connecting your Brother machine to a
computer. You can also find useful
information about using the Brother
ControlCenter utility, using your machine in
a network environment, and frequently used
terms.
(Windows®)
HTML file / CD-ROM / In the Box
This Guide provides useful information
about printing from your mobile device and
scanning from your Brother machine to your
mobile device when connected on a Wi-Fi®
network.
PDF file / Brother Solutions
Mobile Print/Scan
Guide for Brother
iPrint&Scan
(For network models)
1
ii
Visit us at http://support.brother.com.
(Macintosh)
HTML file / Brother Solutions
Center 1
Center 1
Table of Contents
1
General information
1
Using the documentation ....................................................................................... 1
Symbols and conventions used in the documentation .................................... 1
Accessing Brother Utilities (Windows®) ................................................................. 2
Accessing the Software and Network User’s Guide .............................................. 3
Viewing Documentation ................................................................................... 3
Control panel overview .......................................................................................... 6
Menu and features for MFC models ...................................................................... 9
On-screen programming.................................................................................. 9
Menu table .....................................................................................................10
0.Initial Setup ................................................................................................. 11
1.General Setup ............................................................................................16
2.Fax.............................................................................................................. 20
3.Copy ........................................................................................................... 33
4.Printer ......................................................................................................... 34
5.Print Reports............................................................................................... 35
6.Network (For MFC-1910W, MFC-1911NW and MFC-1916NW) ................37
7.Machine Info. 1 ............................................................................................45
Menu and features for DCP models ....................................................................46
On-screen programming................................................................................46
Menu table .....................................................................................................47
1.General Setup ............................................................................................48
2.Copy ........................................................................................................... 50
3.Printer ......................................................................................................... 51
4.Network (For DCP-1610W, DCP-1615NW and DCP-1616NW) ................. 52
5.Machine Info 1............................................................................................. 60
Entering text ........................................................................................................ 61
MFC models .................................................................................................. 61
DCP models .................................................................................................. 62
Ecology features.................................................................................................. 63
Deep Sleep mode .......................................................................................... 63
Auto Power Off (For DCP models) ................................................................ 63
Toner Settings .....................................................................................................63
Toner Setting (Continue mode) ..................................................................... 63
Receiving faxes in Continue Mode (For MFC models) .................................. 64
2
Paper Setting
65
Paper settings...................................................................................................... 65
Paper Type .................................................................................................... 65
Paper Size .....................................................................................................65
Acceptable paper................................................................................................. 66
Paper capacity of the paper tray....................................................................66
iii
3
Loading documents
67
How to load documents .......................................................................................67
Using the automatic document feeder (ADF) (For ADF models)...................67
Using the scanner glass ................................................................................67
4
Sending a fax (MFC models)
69
How to send a fax ................................................................................................69
Cancelling a fax in progress ..........................................................................69
Broadcasting..................................................................................................70
5
Receiving a fax (MFC models)
71
Receive modes ....................................................................................................71
Choosing the receive mode ...........................................................................71
Receive Mode settings ........................................................................................72
Ring Delay .....................................................................................................72
F/T Ring Time (Fax/Tel mode only) ...............................................................72
Fax Detect .....................................................................................................72
6
Dialling and storing numbers (MFC models)
74
Storing numbers ..................................................................................................74
Storing Speed Dial numbers..........................................................................74
Changing or Deleting Speed Dial numbers ...................................................74
How to dial ...........................................................................................................75
Manual dialling...............................................................................................75
Speed dialling ................................................................................................75
Search ...........................................................................................................75
Redial ............................................................................................................75
Caller ID (except India and Vietnam).............................................................76
7
Using PC-FAX (MFC models)
77
PC-FAX Receive (For Windows® only) ...............................................................77
PC-FAX sending ..................................................................................................79
Sending a file as a PC-FAX ...........................................................................79
iv
8
Telephone and external devices (MFC models)
81
Voice operations (MFC-1905 and MFC-1916NW)...............................................81
Making a telephone call................................................................................. 81
Hold ............................................................................................................... 81
Connecting an external TAD (MFC-1900,
MFC-1901, MFC-1910W and MFC-1911NW) .................................................. 81
Connections...................................................................................................82
Recording an outgoing message (OGM)....................................................... 82
Multi-line connections (PABX) ....................................................................... 82
External and extension telephones......................................................................83
Connecting an external or extension telephone ............................................83
For Fax/Tel mode only................................................................................... 83
Using a non-Brother cordless external handset ............................................83
9
Making copies
84
How to copy......................................................................................................... 84
ID COPY ............................................................................................................. 85
Double-sided ID copy ....................................................................................85
One-sided ID copy .........................................................................................86
Other copies .......................................................................................................87
10
How to scan to a computer
89
Scanning a document as a PDF file using ControlCenter4 ................................. 89
Scanning using the SCAN key.............................................................................92
SCAN key settings.........................................................................................92
A
Troubleshooting and other information
94
Consumable items ............................................................................................... 94
Identifying your problem ...................................................................................... 96
Error and maintenance messages....................................................................... 97
If you are having difficulty with your machine ......................................................99
Telephone and Fax problems (MFC models) ................................................ 99
Improving the print quality..................................................................................101
Document Jams (ADF models).........................................................................106
Paper Jams........................................................................................................107
Transferring your faxes or Fax Journal report (MFC models)............................109
Transferring faxes to another fax machine .................................................. 109
Transferring faxes to your PC...................................................................... 109
Transferring the Fax Journal report to another fax machine .......................110
Cleaning and Checking the machine ................................................................. 110
v
B
Specifications
111
DCP-1600, DCP-1601, MFC-1900, MFC-1901 and MFC-1905 ........................111
General........................................................................................................111
Document Size ............................................................................................114
Print media ..................................................................................................114
Fax...............................................................................................................115
Copy ............................................................................................................115
Scanner .......................................................................................................116
Printer ..........................................................................................................116
DCP-1610W, DCP-1615NW, DCP-1616NW,
MFC-1910W, MFC-1911NW and MFC-1916NW ...........................................117
General........................................................................................................117
Document Size ............................................................................................121
Print media ..................................................................................................121
Fax...............................................................................................................122
Copy ............................................................................................................122
Scanner .......................................................................................................123
Printer ..........................................................................................................123
Network (LAN) .............................................................................................124
C
vi
Index
125
1
General information
Using the
documentation
1
The following symbols and conventions are
used throughout the documentation.
Bold
Bold style identifies keys on the
machine's control panel or on
the computer screen.
Italics
Italicized style emphasizes an
important point or refers you to
a related topic.
Courier
New
Courier New font identifies the
messages shown on the LCD
of the machine.
1
Thank you for buying a Brother machine!
Reading the documentation will help you
make the most of your machine.
Symbols and conventions
used in the documentation
1
1
Follow all warnings and instructions marked
on the product.
NOTE
WARNING
WARNING indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injuries.
IMPORTANT
IMPORTANT indicates a potentially
hazardous situation which, if not avoided,
may result in damage to property or loss of
product functionality.
NOTE
NOTE specifies the operating environment,
conditions for installation, or special
conditions of use.
• Most of the illustrations in this User's
Guide show the MFC-1910W.
• This User's Guide uses the following
model group identification names:
• For network models:
DCP-1610W, DCP-1615NW,
DCP-1616NW, MFC-1910W,
MFC-1911NW, MFC-1916NW
• For ADF models:
DCP-1615NW, DCP-1616NW,
MFC-1900, MFC-1901, MFC-1905,
MFC-1910W, MFC-1911W,
MFC-1916NW
Prohibition icons indicate actions
that must not be performed.
Electrical Hazard icons alert you to a
possible electrical shock.
Hot Surface icons warn you not to
touch machine parts that are hot.
Fire hazard icons alert you to the
possibility of fire.
1
Chapter 1
Accessing Brother Utilities (Windows®)
Brother Utilities
is an application launcher that offers convenient access to all Brother
applications installed on your device.
a
(Windows® XP, Windows Vista ®, Windows® 7, Windows Server® 2003, Windows Server®
2008 and Windows Server® 2008 R2)
Click
(Start) > All Programs > Brother > Brother Utilities.
(Windows® 8 and Windows Server® 2012)
Tap or double-click
(Brother Utilities) either on the Start screen or the desktop.
(Windows® 8.1 and Windows Server ® 2012 R2)
Move your mouse to the lower left corner of the Start screen and click
(if you are using
a touchbased device, swipe up from the bottom of the Start screen to display the Apps
screen). When the Apps screen appears, tap or click
b
Select your machine.
c
Choose the function you want to use.
2
(Brother Utilities).
1
General information
Accessing the
Software and Network
User’s Guide
If you have not installed the software, you can
find the documentation on the installer
CD-ROM by following the instructions below:
1
This User’s Guide does not contain all the
information about the machine such as how
to use the advanced features for Printer,
Scanner, PC-Fax 1 and Network 2. When you
are ready to learn detailed information about
these operations, read the Software and
Network User’s Guide that is on the installer
CD-ROM for Windows® users.
MFC models
2
Network models
Viewing Documentation
Viewing Documentation (Windows®)
Turn on your computer. Insert the
installer CD-ROM into your CD-ROM
drive.
NOTE
If the Brother screen does not appear, go
to Computer (My Computer).
(For Windows® 8: Click the
(File
Explorer) icon on the taskbar, and then
go to Computer (This PC).
Double-click the CD-ROM icon, and then
double-click start.exe.
Macintosh users can read the Software and
Network User’s Guide by downloading it from
the Brother Solutions Center
(http://support.brother.com).
1
a
b
If the model name screen appears, click
your model name.
c
If the language screen appears, click
your language. The CD-ROM Top Menu
will appear.
d
e
Click User’s Guides.
1
1
(Windows® 7/Windows Vista®/
Windows® XP)
Click
(Start) > All Programs>
Brother > Brother Utilities, and then click
the drop-down list and select your model
name (if not already selected). Click Support
in the left navigation bar, and then click
User’s Guides.
®
(Windows 8)
Click
(Brother Utilities), and then
click the drop-down list and select your model
name (if not already selected). Click Support
in the left navigation bar, and then click
User’s Guides.
Click User’s guides on the CD-ROM.
If the country screen appears, choose
your country, and then click the
document you want to read.
3
1
Chapter 1
How to find Network setup
instructions (For network models)
1
Your machine can be connected to a
network.
Basic setup instructions, see Quick Setup
Guide.
If your wireless access point or router
supports Wi-Fi Protected Setup or AOSS™,
see Quick Setup Guide.
For more information about network setup,
see Software and Network User’s Guide.
Accessing Brother
CreativeCenter
If you are using Windows®, double-click the
(Brother CreativeCenter) icon on your
desktop to access our FREE website
designed as a resource to help you easily
create and print customized materials for
business and home use with photos, text and
creative touch.
Mac users can access Brother
CreativeCenter at this web address:
http://www.brother.com/creativecenter.
4
1
General information
1
5
Chapter 1
Control panel overview
1
The illustrations of the control panel in this User’s Guide show the MFC-1910W and DCP-1610W.
MFC models
1
3
2
4
01/01 10:00
Fax Only
6
1
On/Off
COPY
Press
3
4
LCD
Displays messages to help you set up and use
your machine.
5
2 in 1 (ID) Copy
You can copy your Identification card both
sides onto one page with the original size.
6
Options
You can quickly and easily choose temporary
settings for copying.
to turn the machine off.
Hook or Hook/Hold
Press before dialling if you want to make sure
a fax machine will answer, and then press
Start.
(MFC-1905 and MFC-1916NW)
Lets you place telephone calls on hold.
Redial
You can redial the last 20 numbers called.
Pause
Inserts a 3.5 second pause when programming
speed dial numbers or when dialling a number
manually.
Resolution
Sets the resolution when sending a fax.
Mode keys:
FAX
Puts the machine in FAX mode. Fax mode is
the default mode.
SCAN
Puts the machine in SCAN mode.
6
Puts the machine in COPY mode.
to turn the machine on. Press and
hold down
2
5
General information
1
4
7
8
9
10
01/01 10:00
Fax Only
11
7
8
WiFi (MFC-1910W, MFC-1911NW and
MFC-1916NW)
Press the WiFi button and launch the wireless
installer on your computer. Follow the onscreen instructions to set up a wireless
connection between your machine and your
network.
When the WiFi light is on, your Brother
machine is connected to a wireless access
point. When the WiFi light blinks, the wireless
connection is down, or your machine is in the
process of connecting to a wireless access
point.
Menu keys:
Clear
Deletes entered data or lets you cancel the
current setting.
Menu
Lets you access the Menu to program your
settings in the machine.
OK
Lets you store your settings and confirm LCD
messages on the machine.
Volume keys:
d or c
Press to scroll backwards or forwards through
menu selections. Press to change the volume
when in fax or standby mode.
a or b
Press to scroll through the menus and options.
Address Book
Lets you access speed dial numbers directly.
9
Dial pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
(MFC-1905 and MFC-1916NW)
The # key temporarily switches the dialling
mode from Pulse to Tone during a telephone
call (not available in New Zealand).
10 Stop/Exit
Stops an operation or exits from a menu. Press
this key to cancel the print job.
11 Start
Lets you start sending faxes, scanning or
making copies.
7
Chapter 1
DCP models
1
2
3
4
5
8
7
6
Stack Copies:01
100% nnonn Auto
1
LCD
Displays messages to help you set up and use
your machine.
2
Menu keys:
Menu
Lets you access the Menu to program your
settings in the machine.
Clear
Deletes entered data or lets you cancel the
current setting.
OK
Lets you store your settings and confirm LCD
messages on the machine.
b or a
Press to scroll through the menus and options.
3
SCAN
Puts the machine in SCAN mode.
4
On/Off
Press
and hold down
off.
5
8
to turn the machine on. Press
to turn the machine
Stop/Exit
Stops an operation or exits from a menu. Press
this key to cancel the print job.
6
Start
Lets you start making copies or scanning.
7
2 in 1 (ID) Copy/Copy Options (DCP-1610W,
DCP-1615NW and DCP-1616NW)
You can copy both sides of your Identification
card onto one page with the original size.
You can quickly and easily choose temporary
settings for copying.
Copy Options (DCP-1600 and DCP-1601)
You can quickly and easily choose temporary
settings for copying.
8
WiFi (DCP-1610W, DCP-1615NW and DCP1616NW)
Press the WiFi button and launch the wireless
installer on your computer. Follow the onscreen instructions to set up a wireless
connection between your machine and your
network.
When the WiFi light is on, your Brother
machine is connected to a wireless access
point. When the WiFi light blinks, the wireless
connection is down, or your machine is in the
process of connecting to a wireless access
point.
2 in 1 (ID) Copy (DCP-1600 and DCP-1601)
You can copy both sides of your Identification
card onto one page with the original size.
General information
Menu and features for
MFC models
On-screen programming
1
1
1
Your machine has been designed to be easy
to use. The LCD provides on-screen
programming using the menu keys.
How to access the menu mode
1
(Example: MFC-1910W)
a
b
Press Menu.
Choose an option.
 Press 0 for Initial Setup menu.
 Press 1 for General Setup menu.
 Press 2 for Fax menu.
 Press 3 for Copy menu.
 Press 4 for Printer menu.
 Press 5 for Print Reports menu.
 Press 6 for Network menu.
 Press 7 for Machine Info. menu.
 Press 9 for Service menu. 1
1
This will appear only when the LCD shows an
error message.
You can also scroll through each menu
level by pressing a or b.
c
Press OK when the option you want
appears on the LCD.
The LCD will then show the next menu
level.
d
Press a or b to scroll to your next menu
selection, and then press OK.
e
Press a or b to display the option you
want, and then press OK.
When you have finished setting an
option, the LCD will show Accepted.
f
Press Stop/Exit to exit Menu mode.
9
Chapter 1
Menu table
1
Using the menu table, you can change the settings in your machine by pressing the number keys
or a and b and OK.
Press Menu, and then according to what is shown on the LCD, press the number keys or a and b
to display different menu options. Press OK to select an option.
In the below example, the copy quality setting is changed from Auto to Text.
3.Copy
a
b
c
d
e
f
10
Level 2
Level 3
Descriptions 1
Options
1.Quality
-
You can
choose the
Copy resolution
for your type of
document.
Auto*
Press Menu.
Press 3 to choose Copy.
Press 1 to choose Quality.
Press a or b to display Text.
Press OK.
Press Stop/Exit.
Text
Photo
Receipt
General information
0.Initial Setup
1
1
0.Initial Setup (For MFC-1900, MFC-1901 and MFC-1905)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
1.Receive
Mode
—
You can choose the
receive mode that
best suits your
needs.
Fax Only*
Your machine
automatically
answers every call as
a fax. Fax Only is
displayed on the LCD
when set.
Fax/Tel
Your machine
controls the line and
automatically
answers every call. If
the call is not a fax,
the phone will ring for
you to pick up the
call. Fax/Tel is
displayed on the LCD
when set.
External TAD
(MFC-1900,
MFC-1901)
Your external
telephone answering
device (TAD)
automatically
answers every call.
Voice messages are
stored on the
external TAD. Fax
messages are
automatically printed.
External TAD is
displayed on the LCD
when set.
Manual
You control the
phone line and must
answer every call
yourself. Manual is
displayed on the LCD
when set.
Page
71
The factory settings are shown in Bold with an asterisk.
11
Chapter 1
0.Initial Setup (For MFC-1900, MFC-1901 and MFC-1905) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
2.Date&Time
1.Date&Time
Puts the date and
time on the LCD and
in headings of faxes
you send if you set up
the station ID.
Year:
Enter the last two
digits of the year.
(e.g. Enter 1, 3 for
2013.)
Month:
Enter the two digits
for the month. (e.g.
Enter 0, 1 for
January.)
Day:
Enter the two digits
for the day. (e.g.
Enter 0, 1 for 1st.)
Time:
Enter the time in 24hour format. (e.g.
Enter 1, 5, 2, 5 for
15:25.)
Set the machine to
change for Daylight
Saving Time.
On
It will reset the time
forward one hour.
Off
It will reset the time
backward one hour.
Sets up your name
and fax number to
appear on each page
you fax.
Fax:
Enter your fax
number (up to 20
digits).
Tel:
Enter your telephone
number (up to 20
digits). If your
telephone number
and fax number are
the same, enter the
same number again.
Name:
Enter your name (up
to 20 characters).
Tone*
Your machine comes
set for Tone dialling
service.
Pulse
If you have Pulse
dialling service
(rotary), you need to
change the dialling
mode.
Detection
Your machine will
dial as soon as it
detects a dial tone.
No Detection*
When you send a fax
automatically, by
default your machine
will wait for a fixed
amount of time
before it starts to dial
the number.
2.Daylight Save
3.Station ID
4.Tone/Pulse
—
—
(not available in
New Zealand)
5.Dial Tone
4.Dial Tone
—
Chooses the dialling
mode.
You can shorten the
dial tone detect
pause.
(for New
Zealand)
The factory settings are shown in Bold with an asterisk.
12
Page
61
General information
0.Initial Setup (For MFC-1900, MFC-1901 and MFC-1905) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
6.Dial Prefix
—
Sets a prefix number
that will always be
added before the fax
number every time
you dial.
—
Enter the prefix
number (up to 5
digits) on the dial
pad, and then press
OK.
5.Dial Prefix
(for New
Zealand)
Page
1
The dial prefix setting
will automatically dial
a predefined number
before every fax
number you dial. For
example: If your
phone system
requires a 9 to dial an
outside number this
setting will
automatically dial 9
for every fax you
send.
7.Reset
6.Reset
1.Address &
Fax
Restores all stored
phone numbers and
fax settings.
1.Reset
(for New
Zealand)
2.Exit
2.All
Settings
Restores all the
machine settings to
factory default.
Cancel restore and
exit the menu.
1.Reset
2.Exit
Cancel restore and
exit the menu.
The factory settings are shown in Bold with an asterisk.
13
Chapter 1
0.Initial Setup (For MFC-1910W, MFC-1911NW and MFC-1916NW)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
1.Date&Time
1.Date&Time
Puts the date and
time on the LCD and
in headings of faxes
you send if you set up
the station ID.
Year:
Enter the last two
digits of the year.
(e.g. Enter 1, 3 for
2013.)
Month:
Enter the two digits
for the month. (e.g.
Enter 0, 1 for
January.)
Day:
Enter the two digits
for the day. (e.g.
Enter 0, 1 for 1st.)
Time:
Enter the time in 24hour format. (e.g.
Enter 1, 5, 2, 5 for
15:25.)
Set the machine to
change for Daylight
Saving Time.
On
It will reset the time
forward one hour.
Off
It will reset the time
backward one hour.
3.Time Zone
Sets the time zone for
your country.
UTCXXX:XX
—
Sets up your name
and fax number to
appear on each page
you fax.
Fax:
Enter your fax
number (up to 20
digits).
Tel:
Enter your telephone
number (up to 20
digits). If your
telephone number
and fax number are
the same, enter the
same number again.
Name:
Enter your name (up
to 20 characters).
Tone*
Your machine comes
set for Tone dialling
service.
Pulse
If you have Pulse
dialling service
(rotary), you need to
change the dialling
mode.
2.Daylight
Save
2.Station ID
3.Tone/Pulse
(not available in
New Zealand)
—
Chooses the dialling
mode.
The factory settings are shown in Bold with an asterisk.
14
Page
61
General information
0.Initial Setup (For MFC-1910W, MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
4.Dial Tone
—
You can shorten the
dial tone detect
pause.
Detection
Your machine will
dial as soon as it
detects a dial tone.
No Detection*
When you send a fax
automatically, by
default your machine
will wait for a fixed
amount of time
before it starts to dial
the number.
—
Enter the prefix
number (up to 5
digits) on the dial
pad, and then press
OK.
3.Dial Tone
(for New
Zealand)
5.Dial Prefix
—
4.Dial Prefix
(for New
Zealand)
Sets a prefix number
that will always be
added before the fax
number every time
you dial.
Page
1
The dial prefix setting
will automatically dial
a predefined number
before every fax
number you dial. For
example: If your
phone system
requires a 9 to dial an
outside number this
setting will
automatically dial 9
for every fax you
send.
6.Reset
5.Reset
Restores all the
function settings to
factory default.
1.Reset
Restores all network
settings to the factory
default.
1.Reset
3.Address &
Fax
Restores all stored
phone numbers and
fax settings.
1.Reset
4.All
Settings
Restores all the
machine settings to
factory default.
1.Reset
1.Machine
Reset
(for New
Zealand)
2.Network
2.Exit
2.Exit
2.Exit
2.Exit
Cancel restore and
exit the menu.
Cancel restore and
exit the menu.
Cancel restore and
exit the menu.
Cancel restore and
exit the menu.
All Settings takes
less time than
Factory Reset.
The factory settings are shown in Bold with an asterisk.
15
Chapter 1
1.General Setup
1
1.General Setup (For MFC-1900, MFC-1901 and MFC-1905)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
1.Mode Timer
—
You can set how
much time the
machine takes after
the last Copy or Scan
operation to return to
Fax mode.
0 Sec
Return to the fax
mode at once.
30 Secs
Return to the fax
mode after the time
you choose.
1 Min
Page
2 Mins*
5 Mins
Off
2.Paper
1.Paper Type
Plain*
The machine will stay
in the mode you used
last.
65
Recycled Paper
2.Paper Size
Sets the size of the
paper in the paper
tray.
A4*
Letter
Legal
Folio
A5
A5 L
B5
Executive
(For Philippines:
Letter*)
3.Volume
1.Ring
Adjusts the ring
volume.
Low
Med*
High
Off
2.Beeper
3.Speaker
When the beeper is
on, the machine will
beep when you press
a key, make a
mistake, or after you
send or receive a fax.
Low
Adjusts the speaker
volume.
Low
Med*
High
Off
Med*
High
Off
The factory settings are shown in Bold with an asterisk.
16
65
General information
1.General Setup (For MFC-1900, MFC-1901 and MFC-1905) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
4.Ecology
1.Toner Save
You can save toner
using this feature.
On
Increases the page
yield of the toner
cartridge. When you
set Toner Save to
On, print appears
lighter.
Page
1
Off*
5.LCD
Contrast
—
Adjusts the contrast
of the LCD.
-nnnno+
-nnnon+
-nnonn+*
Press c to make the
LCD darker. Or press
d to make the LCD
lighter.
-nonnn+
-onnnn+
6.Scan Size
—
Adjusts the scan area
to the size of the
document.
A4*
Letter
(For Philippines:
Letter*)
7.Replace
Toner
—
Sets the machine to
continue or stop
printing after the LCD
shows Replace
Toner.
Continue
The machine will
continue printing.
Replace the toner
cartridge with a new
one after the LCD
shows Toner
Ended.
Stop*
The machine will stop
printing. Replace the
toner cartridge with a
new one.
63
The factory settings are shown in Bold with an asterisk.
17
Chapter 1
1.General Setup (For MFC-1910W, MFC-1911NW and MFC-1916NW)
Level 2
Level 3
Descriptions 1
Options
1.Default
Mode
—
Select the default
mode.
Fax*
2.Mode Timer
—
Descriptions 2
Page
Copy
Scan
You can set how
much time the
machine takes after
the last operation to
return to the default
mode.
0 Sec
Return to the default
mode at once.
30 Secs
Return to the default
mode after the time
you choose.
1 Min
2 Mins*
5 Mins
Off
3.Paper
1.Paper Type
Plain*
The machine will stay
in the mode you used
last.
65
Recycled Paper
2.Paper Size
Sets the size of the
paper in the paper
tray.
A4*
Letter
Legal
Folio
A5
A5 L
B5
Executive
(For Philippines:
Letter*)
4.Volume
1.Ring
Adjusts the ring
volume.
Low
Med*
High
Off
2.Beeper
3.Speaker
When the beeper is
on, the machine will
beep when you press
a key, make a
mistake, or after you
send or receive a fax.
Low
Adjusts the speaker
volume.
Low
Med*
High
Off
Med*
High
Off
The factory settings are shown in Bold with an asterisk.
18
65
General information
1.General Setup (For MFC-1910W, MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
5.Ecology
1.Toner Save
You can save toner
using this feature.
On
Increases the page
yield of the toner
cartridge. When you
set Toner Save to
On, print appears
lighter.
Page
1
Off*
6.LCD
Contrast
—
Adjusts the contrast
of the LCD.
-nnnno+
-nnnon+
-nnonn+*
Press c to make the
LCD darker. Or press
d to make the LCD
lighter.
-nonnn+
-onnnn+
7.Scan Size
—
Adjusts the scan area
to the size of the
document.
A4*
Letter
(For Philippines:
Letter*)
8.Replace
Toner
—
Sets the machine to
continue or stop
printing after the LCD
shows Replace
Toner.
Continue
The machine will
continue printing.
Replace the toner
cartridge with a new
one after the LCD
shows Toner
Ended.
Stop*
The machine will stop
printing. Replace the
toner cartridge with a
new one.
63
The factory settings are shown in Bold with an asterisk.
19
Chapter 1
2.Fax
1
2.Fax (For MFC-1900, MFC-1901 and MFC-1905)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
1.Setup
Receive
1.Ring Delay
The Ring Delay
setting sets the
number of times the
machine rings before
it answers in Fax
Only and Fax/Tel
modes.
(02 - 10)
If you have external
or extension
telephones on the
same line as the
machine, choose the
maximum number of
rings.
72
Sets the length of the
fast double-ring time
in Fax/Tel mode.
20 Secs
If the call is a fax,
then your machine
will receive it;
however, if it is a
voice call the
machine will sound
the F/T ring (a fast
double-ring) for the
time you have set in
the F/T Ring Time
setting. If you hear
the F/T ring it means
that you have a voice
caller on the line.
72
On*
The machine can
receive a fax
automatically, even if
you answer the call.
72
Semi (MFC-1905)
The machine will only
receive a fax call
automatically if you
answered it using the
machine's handset.
Off
If you are at the
machine and answer
a fax call first by lifting
the handset of an
external telephone
(For MFC-1900 and
MFC-1901) or the
machine (For MFC1905), press Start.
(In FAX mode
only)
2.F/T Ring
Time
02*
(Example for
Australia)
30 Secs*
40 Secs
70 Secs
(For New Zealand)
20 Secs
30 Secs*
40 Secs
55 Secs
3.Fax Detect
Receives fax
messages without
pressing Start. When
Fax Detect is On, you
can receive fax
messages without
pressing Start.
The factory settings are shown in Bold with an asterisk.
20
Page
General information
2.Fax (For MFC-1900, MFC-1901 and MFC-1905) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
1.Setup
Receive
4.Auto
Reduction
The machine
calculates the
reduction ratio by
using the page size of
the fax and your
Paper Size setting
(Menu, 1, 2, 2).
On*
If you choose On, the
machine
automatically
reduces each page of
an incoming fax to fit
on one page of A4,
Letter, Legal, or Folio
size paper.
(In FAX mode
only)
(Continued)
Page
1
Off
5.Memory
Receive
Automatically stores
any incoming faxes in
its memory if it runs
out of paper.
On*
Further incoming
faxes will also be
stored into memory
until the memory is
full. When the
memory is full the
machine will stop
automatically
answering calls. To
print the faxes, put
fresh paper in the tray
and press Start.
Off
Further incoming
faxes will not be
stored in memory.
The machine will
then stop
automatically
answering calls until
fresh paper is put in
the paper tray. To
print the last fax you
received, put fresh
paper in the tray and
press Start.
-nnnno+
Press c to make
darker, press d to
make lighter.
The machine will
carry on receiving the
current fax, with the
remaining pages
being stored in
memory, if enough
memory is available.
6.Print
Density
You can adjust the
Print Density setting
to make your printed
pages darker or
lighter.
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
The factory settings are shown in Bold with an asterisk.
21
Chapter 1
2.Fax (For MFC-1900, MFC-1901 and MFC-1905) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
2.Setup Send
1.Contrast
Changes the
lightness or darkness
of faxes you send.
Auto*
Auto will give the
best results. It
automatically
chooses a suitable
contrast for your
document.
Light
If your document is
too light, choose
Light.
Dark
If your document is
too dark, choose
Dark.
Standard*
Suitable for most
typed documents.
Fine
Good for small print
and transmits a little
slower than Standard
resolution.
S.Fine
Good for small print
or artwork and
transmits slower than
Fine resolution.
Photo
Use when the
document has
varying shades of
grey or is a
photograph. This has
the slowest
transmission time.
On
Turn this feature on if
you are having
difficulties sending
faxes overseas. This
feature will stay on for
the next fax only.
Off*
Keep this setting Off
when the network
connection is good
and you can send an
overseas fax
sucessfully.
2.Fax
Resolution
Sets the default
resolution for
outgoing faxes.
The quality of an
outgoing fax can be
improved by
changing the Fax
Resolution.
3.Overseas
Mode
If you are having
difficulty sending a
fax overseas due to a
bad connection, then
turning on Overseas
Mode may help.
The factory settings are shown in Bold with an asterisk.
22
Page
General information
2.Fax (For MFC-1900, MFC-1901 and MFC-1905) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
3.Anti-Junk
Fax
1.Register
If you do not want to
receive a fax/call
from specific
numbers, you can
register the numbers
up to 100 to the AntiJunk Fax list.
—
Choose the number
you want to register
to the Anti-Junk
Faxlist by pressing
a and b. Press OK
and then press 1.
—
Choose the number
you want to delete
from the Anti-Junk
Fax list by pressing
a and b. Press OK
and then press 1.
—
You can print a list of
registered
fax/telephone
numbers in the AntiJunk Fax list.
(Except India and
Vietnam)
2.Delete
3.Print
Report
4.Address
Book
(For India and
Vietnam)
3.Address
Book
1.Speed Dial
You need to apply for
the Caller ID service
at your local
telephone company.
You can not choose
the numbers that is
not stored in the
Caller ID memory.
Stores up to 99
Speed Dial numbers.
Press
Page
1
—
(Address
Book) twice and
enter the two digit
Speed Dial number.
The factory settings are shown in Bold with an asterisk.
23
Chapter 1
2.Fax (For MFC-1900, MFC-1901 and MFC-1905) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
5.Report
Setting
1.Transmission
You can use the
Transmission
Verification Report as
proof that you sent a
fax. This lists the
receiving party's
name or fax number,
the time and date of
transmission,
duration of
transmission,
number of pages
sent, and whether or
not the transmission
was successful.
On
Prints a report after
every fax you send.
On+Image
Prints a report after
every fax you send. A
portion of the fax's
first page appears on
the report.
Off*
Prints a report if your
fax is unsuccessful
due to a transmission
error.
Off+Image
Prints a report if your
fax is unsuccessful
due to a transmission
error. A portion of the
fax's first page
appears on the
report.
Sets the interval for
automatic printing of
the Fax Journal.
Off
If you set the interval
to Off, you can still
print the report
manually from the
Print Reports menu.
Every 50 Faxes*
The machine will
print the Journal
when the machine
has stored 50 jobs.
Every 6 Hours
The machine prints
the report at the
selected time and
then erases all jobs
from its memory.
(For India and
Vietnam)
4.Report
Setting
2.Journal
Period
The Fax Journal is a
list of information
about your last 200
incoming and
outgoing faxes.
Every 12 Hours
Every 24 Hours
Every 2 Days
Page
Every 7 Days
6.Remote Fax
Opt
1.PC Fax
Receive
Sets the machine to
send faxes to your
PC. If you choose On,
you can turn on the
safety feature
Backup Print.
On
2.Print
Document
If you turn on the PCFax Receive feature
and your machine
stores received faxes
in memory, you can
print a fax from the
memory.
—
(For India and
Vietnam)
5.Remote Fax
Opt
The factory settings are shown in Bold with an asterisk.
24
Off*
77
General information
2.Fax (For MFC-1900, MFC-1901 and MFC-1905) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
7.Remaining
Jobs
—
You can check which
jobs are in the
memory and lets you
cancel scheduled
jobs.
[XXX]
Please follow the
prompts on the LCD.
1.Compatibility
If you are having
difficulty sending or
receiving a fax due to
possible interference
on the telephone line,
adjust the
equalization for
compatibility to
reduce the modem
speed for fax
operations.
Normal*
Sets the modem
speed at 14400 bps.
Basic(for VoIP)
Cuts the modem
speed to 9600 bps
and turns the error
correction mode
(ECM) off. If you
regularly experience
interference on your
standard telephone
line try this setting.
Use with telephone
company distinctive
ringing service allows
you to have a voice
number and fax
number on the one
telephone line.
On
View or print a list of
the last 30 Caller IDs
stored in the
memory.
Display #
The Caller ID of the
last call will appear
on the display.
Print Report
Prints the last thirty
calls in the Caller ID
list.
(For India and
Vietnam)
Page
1
70
6.Remaining
Jobs
0.Miscellaneous
2.Distinctive
(For Australia,
New Zealand and
Singapore)
2.Caller ID
(Except
Australia, New
Zealand,
Singapore, India
and Vietnam)
Off*
3.Caller ID
(For Australia,
New Zealand and
Singapore)
The factory settings are shown in Bold with an asterisk.
25
Chapter 1
2.Fax (For MFC-1910W, MFC-1911NW and MFC-1916NW)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
1.Setup
Receive
1.Receive
Mode
Chooses the receive
mode that best suits
your needs.
Fax Only*
Your machine
automatically
answers every call as
a fax. Fax Only is
displayed on the LCD
when set.
Fax/Tel
Your machine
controls the line and
automatically
answers every call. If
the call is not a fax,
the phone will ring for
you to pick up the
call. Fax/Tel is
displayed on the LCD
when set.
External TAD
Your external
telephone answering
device (TAD)
automatically
answers every call.
Voice messages are
stored on the
external TAD. Fax
messages are
automatically printed.
External TAD is
displayed on the LCD
when set.
(In FAX mode
only)
(Except MFC1916W)
2.Ring Delay
The Ring Delay
setting sets the
number of times the
machine rings before
it answers in Fax
Only and Fax/Tel
modes.
The factory settings are shown in Bold with an asterisk.
26
Manual
You control the
phone line and must
answer every call
yourself. Manual is
displayed on the LCD
when set.
(02 - 10)
If you have external
or extension
telephones on the
same line as the
machine, choose the
maximum number of
rings.
02*
(Example for
Australia)
Page
71
72
General information
2.Fax (For MFC-1910W, MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
1.Setup
Receive
3.F/T Ring
Time
Sets the length of the
fast double-ring time
in Fax/Tel mode.
20 Secs
If the call is a fax,
then your machine
will receive it;
however, if it is a
voice call the
machine will sound
the F/T ring (a fast
double-ring) for the
time you have set in
the F/T Ring Time
setting. If you hear
the F/T ring it means
that you have a voice
caller on the line.
72
On*
The machine can
receive a fax
automatically, even if
you answer the call.
72
Semi (MFC1916NW)
The machine will only
receive a fax call
automatically if you
answered it using the
machine's handset.
Off
If you are at the
machine and answer
a fax call first by lifting
the handset of an
external telephone
(For MFC-1910W,
MFC-1911NW and
MFC-1916NW) or the
machine (For MFC1916NW), Press
Start and press 2.
On*
If you choose On, the
machine
automatically
reduces each page of
an incoming fax to fit
on one page of A4,
Letter, Legal, or Folio
size paper.
(In FAX mode
only)
30 Secs*
40 Secs
70 Secs
(Continued)
(For New Zealand)
20 Secs
30 Secs*
40 Secs
55 Secs
4.Fax Detect
5.Auto
Reduction
Receives fax
messages without
pressing Start. When
Fax Detect is On, you
can receive fax
messages without
pressing Start.
The machine
calculates the
reduction ratio by
using the page size of
the fax and your
Paper Size setting
(Menu, 1, 3, 2).
Page
1
Off
The factory settings are shown in Bold with an asterisk.
27
Chapter 1
2.Fax (For MFC-1910W, MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
1.Setup
Receive
6.Memory
Receive
Automatically stores
any incoming faxes in
its memory if it runs
out of paper.
On*
Further incoming
faxes will also be
stored into memory
until the memory is
full. When the
memory is full the
machine will stop
automatically
answering calls. To
print the faxes, put
fresh paper in the tray
and press Start.
Off
Further incoming
faxes will not be
stored in memory.
The machine will
then stop
automatically
answering calls until
fresh paper is put in
the paper tray. To
print the last fax you
received, put fresh
paper in the tray and
press Start.
-nnnno+
Press c to make
darker, press d to
make lighter.
(In FAX mode
only)
The machine will
carry on receiving the
current fax, with the
remaining pages
being stored in
memory, if enough
memory is available.
(Continued)
7.Print
Density
You can adjust the
Print Density setting
to make your printed
pages darker or
lighter.
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
2.Setup Send
1.Contrast
Changes the
lightness or darkness
of faxes you send.
The factory settings are shown in Bold with an asterisk.
28
Auto*
Auto will give the
best results. It
automatically
chooses a suitable
contrast for your
document.
Light
If your document is
too light, choose
Light.
Dark
If your document is
too dark, choose
Dark.
Page
General information
2.Fax (For MFC-1910W, MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
2.Setup Send
2.Fax
Resolution
Sets the default
resolution for
outgoing faxes.
Standard*
Suitable for most
typed documents.
The quality of an
outgoing fax can be
improved by
changing the Fax
Resolution.
Fine
Good for small print
and transmits a little
slower than Standard
resolution.
S.Fine
Good for small print
or artwork and
transmits slower than
Fine resolution.
Photo
Use when the
document has
varying shades of
grey or is a
photograph. This has
the slowest
transmission time.
On
Turn this feature on if
you are having
difficulties sending
faxes overseas. This
feature will stay on for
the next fax only.
Off*
Keep this setting Off
when the network
connection is good
and you can send an
overseas fax
sucessfully.
(Continued)
3.Overseas
Mode
If you are having
difficulty sending a
fax overseas due to a
bad connection, then
turning on Overseas
Mode may help.
4.Auto Redial Set the machine to
redial the last fax
number after five
minutes if the fax did
not go through
because the line was
busy.
Page
1
On*
Off
The factory settings are shown in Bold with an asterisk.
29
Chapter 1
2.Fax (For MFC-1910W, MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
3.Anti-Junk
Fax
(Except India and
Vietnam)
1.Register
If you do not want to
receive a fax/call
from specific
numbers, you can
register the numbers
up to 100 to the AntiJunk Fax list.
—
Choose the number
you want to register
to the Anti-Junk Fax
list by pressing a and
2.Delete
3.Print
Report
4.Address
Book
1.Speed Dial
(For India and
Vietnam)
(For India and
Vietnam)
4.Report
Setting
Stores up to 99
Speed Dial numbers.
—
and b . Press OK and
then press 1.
—
You can print a list of
registered
fax/telephone
numbers in the AntiJunk Fax list.
—
(Address Book)
twice and enter the
two digit Speed Dial
number.
1.Transmission
You can use the
Transmission
Verification Report as
proof that you sent a
fax. This lists the
receiving party's
name or fax number,
the time and date of
transmission,
duration of
transmission,
number of pages
sent, and whether or
not the transmission
was successful.
On
Prints a report after
every fax you send.
On+Image
Prints a report after
every fax you send. A
portion of the fax's
first page appears on
the report.
Off*
Prints a report if your
fax is unsuccessful
due to a transmission
error.
Off+Image
Prints a report if your
fax is unsuccessful
due to a transmission
error. A portion of the
fax's first page
appears on the
report.
No Report
The factory settings are shown in Bold with an asterisk.
30
Choose the number
you want to delete
from the Anti-Junk
Fax list by pressing a
Press
3.Address
Book
5.Report
Setting
You need to apply for
the Caller ID service
at your local
telephone company.
You can not choose
the numbers that is
not stored in the
Caller ID memory.
b . Press OK and
then press 1.
Page
General information
2.Fax (For MFC-1910W, MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
5.Report
Setting
2.Journal
Period
Sets the interval for
automatic printing of
the Fax Journal.
Off
If you set the interval
to Off, you can still
print the report
manually from the
Print Reports menu.
Every 50 Faxes*
The machine will
print the Journal
when the machine
has stored 50 jobs.
Every 6 Hours
The machine prints
the report at the
selected time and
then erases all jobs
from its memory.
(For India and
Vietnam)
The Fax Journal is a
list of information
about your last 200
incoming and
outgoing faxes.
4.Report
Setting
(Continued)
Every 12 Hours
Every 24 Hours
Every 2 Days
Page
1
Every 7 Days
6.Remote Fax
Opt
1.PC Fax
Receive
Sets the machine to
send faxes to your
PC. If you choose On,
you can turn on the
safety feature
Backup Print.
On
2.Print
Document
If you turn on the PCFax Receive feature
and your machine
stores received faxes
in memory, you can
print a fax from the
memory.
—
—
You can check which
jobs are in the
memory and lets you
cancel scheduled
jobs.
[XXX]
Please follow the
prompts on the LCD.
1.Compatibility
If you are having
difficulty sending or
receiving a fax due to
possible interference
on the telephone line,
adjust the
equalization for
compatibility to
reduce the modem
speed for fax
operations.
Normal*
Sets the modem
speed at 14400 bps.
Basic(for VoIP)
Cuts the modem
speed to 9600 bps
and turns the error
correction mode
(ECM) off. If you
regularly experience
interference on your
standard telephone
line try this setting.
(For India and
Vietnam)
5.Remote Fax
Opt
7.Remaining
Jobs
(For India and
Vietnam)
77
Off*
70
6.Remaining
Jobs
0.Miscellaneous
The factory settings are shown in Bold with an asterisk.
31
Chapter 1
2.Fax (For MFC-1910W, MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
Descriptions 1
Options
0.Miscellaneous
2.Distinctive
(For Australia,
New Zealand and
Singapore)
Use with telephone
company distinctive
ringing service allows
you to have a voice
number and fax
number on the one
telephone line.
On
2.Caller ID
(Except
Australia, New
Zealand,
Singapore, India
and Vietnam)
View or print a list of
the last 30 Caller IDs
stored in the
memory.
Display #
The Caller ID of the
last call will appear
on the display.
Print Report
Prints the last thirty
calls in the Caller ID
list.
(Continued)
3.Caller ID
(For Australia,
New Zealand and
Singapore)
The factory settings are shown in Bold with an asterisk.
32
Descriptions 2
Off*
Page
General information
3.Copy
1
1
3.Copy
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
1.Quality
—
You can choose the
Copy resolution for
your type of
document.
Auto*
Auto is the
recommended mode
for ordinary printouts.
Suitable for
documents that
contain both text and
photographs.
Text
Suitable for
documents
containing mainly
text.
Photo
Better copy quality
for photographs.
Receipt
Suitable for copying
receipts.
-nnnno+
Press c to increase
the brightness or
press d to decrease
the brightness.
2.Brightness
—
Adjusts the copy
brightness for copies.
-nnnon+
-nnonn+*
Page
-nonnn+
-onnnn+
3.Contrast
—
Adjust the contrast to
help an image look
sharper and more
vivid.
-nnnno+
-nnnon+
-nnonn+*
Press c to increase
the contrast or press
d to decrease the
contrast.
-nonnn+
-onnnn+
4.ID Copy
1.Quality
You can change the
default settings for ID
Copy.
2.Brightness
Auto*
Lighter
(For India:
Lighter*)
-nnnno+
-nnnon+*
-nnonn+
Auto is the standard
mode for ordinary
printouts. If you want
to make it clearer,
choose Lighter.
Press c to increase
the brightness or
press d to decrease
the brightness.
-nonnn+
-onnnn+
(The default setting
varies depending on
the country.)
The factory settings are shown in Bold with an asterisk.
33
Chapter 1
3.Copy (continued)
Level 2
Level 3
4.ID Copy
3.Contrast
Descriptions 1
(Continued)
Options
Descriptions 2
-nnnno+
Press c to increase
the contrast or press
d to decrease the
contrast.
-nnnon+
-nnonn+*
Page
-nonnn+
-onnnn+
(The default setting
varies depending on
the country.)
4.2in1/1in1
2in1*
Allows you to use the
2 in 1 (ID) Copy key
as a double- sided
copy.
85
1in1
Allows you to use the
2 in 1 (ID) Copy key
as a one-sided copy.
86
The factory settings are shown in Bold with an asterisk.
4.Printer
1
4.Printer
Level 2
Level 3
Descriptions 1
Options
1.Print
Options
1.Test Print
Prints a test page.
—
2.Auto
Continue
—
If this setting is
enabled, the machine
will automatically
clear a paper size
error, and will use the
paper loaded in the
paper tray.
On*
3.Reset
Printer
—
Restores the printer
settings to the
original factory
default settings.
1.Reset
The factory settings are shown in Bold with an asterisk.
34
Off
2.Exit
Descriptions 2
Size mismatch is
displayed on the LCD
and printing does not
occur.
Page
General information
5.Print Reports
1
1
5.Print Reports (For MFC-1900, MFC-1901 and MFC-1905)
Level 2
Level 3
1.XMIT Verify
1.View on LCD You can use the
Transmission
Verification Report as
proof that you sent a
fax. This report lists
the receiving party’s
2.Print
name or fax number,
Report
the time and date of
transmission,
duration of
transmission,
number of pages
sent, and whether or
not the transmission
was successful.
2.Address
Book
1.Numeric
2.Alphabetic
3.Fax Journal
—
Descriptions 1
Options
Descriptions 2
—
You can view the
Transmission
Verification Report
for your last 200
outgoing faxes.
—
Print the last report.
Lists names and
numbers stored in
the Speed Dial
memory.
—
Print in numerical
order.
—
Print in alphabetical
order.
Prints a list of
information about
your last 200
incoming and
outgoing faxes.
—
Page
(TX: transmit)
(RX: receive)
4.User
Settings
—
Lists your settings.
—
The factory settings are shown in Bold with an asterisk.
35
Chapter 1
5.Print Reports (For MFC-1910W, MFC-1911NW and MFC-1916NW)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
1.XMIT Verify
1.View on LCD
You can use the
Transmission
Verification Report as
proof that you sent a
fax. This report lists
the receiving party’s
name or fax number,
the time and date of
transmission,
duration of
transmission,
number of pages
sent, and whether or
not the transmission
was successful.
—
You can view the
Transmission
Verification Report
for your last 200
outgoing faxes.
—
Print the last report.
Lists names and
numbers stored in
the Speed Dial
memory.
—
Print in numerical
order.
—
Print in alphabetical
order.
Prints a list of
information about
your last 200
incoming and
outgoing faxes.
—
2.Print
Report
2.Address
Book
1.Numeric
2.Alphabetic
3.Fax Journal
—
(TX: transmit)
(RX: receive)
4.Print
Settings
—
Print a list of your
settings for printing.
—
5.User
Settings
—
Lists your settings.
—
6.Network
Config
—
Print a list of your
Network settings.
7.WLAN Report
—
Prints the result of
wireless LAN
connectivity
diagnosis.
The factory settings are shown in Bold with an asterisk.
36
Page
General information
6.Network (For MFC-1910W, MFC-1911NW and MFC-1916NW)
1
1
6.Network (MFC-1910W)
Level 2
Level 3
Descriptions 1
Level 4
Descriptions 2
1.WLAN
1.TCP/IP
—
1.Boot Method
Auto*
Page
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address
Enter the IP address.
3.Subnet Mask
Enter the Subnet
mask.
4.Gateway
Enter the Gateway
address.
5.Node Name
Enter the Node
name. (Up to 32
characters)
6.WINS Config
Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server
Specifies the IP
address of the
primary or secondary
WINS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Secondary
[000-255].[000-255].
[000-255].[000-255]
The factory settings are shown in Bold with an asterisk.
37
Chapter 1
6.Network (MFC-1910W) (continued)
Level 2
Level 3
Descriptions 1
Level 4
Descriptions 2
1.WLAN
1.TCP/IP
—
8.DNS Server
(Continued)
(Continued)
Specifies the IP
address of the
primary or secondary
DNS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Secondary
[000-255].[000-255].
[000-255].[000-255]
9.APIPA
On*
Off
Automatically
allocates the IP
address from the linklocal address range.
0.IPv6
On
Off*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://support.brother.
com for more
information.
(Windows® only)
3.Setup
Wizard
The Setup Wizard
guides you through
the wireless network
configuration.
—
4.WPS/AOSS
You can easily
configure your
wireless network
settings using the
one-button push
method.
—
5.WPS w/PIN
Code
You can easily
configure your
wireless network
settings using WPS
with a PIN code.
—
You can configure
your wireless
network settings
using the Brother
CD-ROM.
The factory settings are shown in Bold with an asterisk.
38
—
2.WLAN
Assistant
Page
General information
6.Network (MFC-1910W) (continued)
Level 2
Level 3
1.WLAN
6.WLAN Status —
Descriptions 1
Level 4
Descriptions 2
1.Status
You can see the
current wireless
network status.
2.Signal
You can see the
current wireless
network signal
strength.
3.SSID
You can see the
current SSID.
4.Comm. Mode
You can see the
current
Communication
Mode.
(Continued)
Page
1
7.MAC Address Shows the MAC
address of the
machine.
8.Set to
Default
2.Network
Reset
Restore the wireless
network setting to
factory default.
1.Reset
2.Exit
9.WLAN Enable Enable or Disable the
Wireless LAN
manually.
On
—
1.Reset
Restore all network
settings back to the
factory settings.
Off*
2.Exit
The factory settings are shown in Bold with an asterisk.
39
Chapter 1
6.Network (MFC-1911NW and MFC-1916NW)
Level 2
Level 3
Descriptions 1
Level 4
Descriptions 2
1.Wired LAN
1.TCP/IP
—
1.Boot Method
Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address
Enter the IP address.
3.Subnet Mask
Enter the Subnet
mask.
4.Gateway
Enter the Gateway
address.
5.Node Name
Enter the Node
name. (Up to 32
characters)
6.WINS Config
Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server
Specifies the IP
address of the
primary or secondary
WINS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Secondary
[000-255].[000-255].
[000-255].[000-255]
8.DNS Server
Specifies the IP
address of the
primary or secondary
DNS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Secondary
[000-255].[000-255].
[000-255].[000-255]
The factory settings are shown in Bold with an asterisk.
40
Page
General information
6.Network (MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
1.Wired LAN
1.TCP/IP
(Continued)
(Continued)
Descriptions 1
Level 4
Descriptions 2
9.APIPA
On*
Page
1
Off
Automatically
allocates the IP
address from the
linklocal address
range.
0.IPv6
On
Off*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://support.brother.com
for more information.
2.Ethernet
—
—
Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Choose the Ethernet
link mode.
3.Wired
Status
—
—
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
You can see the
current wired network
status.
4.MAC Address Shows the MAC
address of the
machine.
—
5.Set to
Default
Restore the wired
network setting to
factory default.
—
6.Wired
Enable
—
—
1.Reset
2.Exit
On*
Off
Enable or disable the
wired network
manually.
The factory settings are shown in Bold with an asterisk.
41
Chapter 1
6.Network (MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
Descriptions 1
Level 4
Descriptions 2
2.WLAN
1.TCP/IP
—
1.Boot Method
Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address
Enter the IP address.
3.Subnet Mask
Enter the Subnet
mask.
4.Gateway
Enter the Gateway
address.
5.Node Name
Enter the Node
name. (Up to 32
characters)
6.WINS Config
Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server
Specifies the IP
address of the
primary or secondary
WINS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Secondary
[000-255].[000-255].
[000-255].[000-255]
The factory settings are shown in Bold with an asterisk.
42
Page
General information
6.Network (MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
Descriptions 1
Level 4
Descriptions 2
2.WLAN
1.TCP/IP
—
8.DNS Server
(Continued)
(Continued)
Specifies the IP
address of the
primary or secondary
DNS server.
Page
1
Primary
[000-255].[000-255].
[000-255].[000-255]
Secondary
[000-255].[000-255].
[000-255].[000-255]
9.APIPA
On*
Off
Automatically
allocates the IP
address from the linklocal address range.
0.IPv6
On
Off*
Enable or disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://support.brother.
com for more
information.
—
2.WLAN
Assistant
(Windows® only)
3.Setup
Wizard
The Setup Wizard
guides you through
the wireless network
configuration.
—
4.WPS/AOSS
You can easily
configure your
wireless network
settings using the
one-button push
method.
—
5.WPS w/PIN
Code
You can easily
configure your
wireless network
settings using WPS
with a PIN code.
—
You can configure
your wireless
network settings
using the Brother
CD-ROM.
The factory settings are shown in Bold with an asterisk.
43
Chapter 1
6.Network (MFC-1911NW and MFC-1916NW) (continued)
Level 2
Level 3
Descriptions 1
Level 4
Descriptions 2
2.WLAN
6.WLAN Status
—
1.Status
You can see the
current wireless
network status.
2.Signal
You can see the
current wireless
network signal
strength.
3.SSID
You can see the
current SSID.
4.Comm. Mode
You can see the
current
Communication
Mode.
(Continued)
3.Network
Reset
7.MAC Address
Shows the MAC
address of the
machine.
8.Set to
Default
Restore the wireless
network setting to
factory default.
1.Reset
9.WLAN Enable
Enable or disable the
wireless network
manually.
On
Restore all network
settings back to the
factory settings.
1.Reset
—
The factory settings are shown in Bold with an asterisk.
44
2.Exit
Off*
2.Exit
Page
General information
7.Machine Info. 1
1
1
7.Machine Info. 1
Level 2
Level 3
Descriptions 1
Options
1.Serial No.
—
You can check the
serial number of your
machine.
—
2.Version
1.Main
Version
You can check the
firmware version of
your machine.
—
3.Page
Counter
—
You can check the
number of pages the
machine has printed
during its life.
Total
Displays the total
page count.
Fax/List
Displays the page
counter for faxes and
lists.
Copy
Displays the page
counter for copies.
Print
Displays the page
counter for printed
pages.
4.Parts Life
5.Reset Drum
1.Toner
You can check the
percentage of Toner
life that remains.
—
2.Drum
You can check the
percentage of Drum
life that remains.
—
—
You can reset the
drum counter when
you replace the drum
unit with a new one.
a Reset
Descriptions 2
Page
94
b Exit
The factory settings are shown in Bold with an asterisk.
1
For MFC-1900, MFC-1901 and MFC-1905, this menu is 6.Machine Info.
45
Chapter 1
Menu and features for
DCP models
On-screen programming
1
1
Your machine has been designed to be easy
to use. The LCD provides on-screen
programming using the menu keys.
How to access the menu mode
a
b
Press Menu.
Scroll through each menu level by
pressing a or b for the direction you
want.
c
Press OK when the option you want
appears on the LCD.
The LCD will then show the next menu
level.
d
Press a or b to scroll to your next menu
selection.
e
Press OK.
When you have finished setting an
option, the LCD will show Accepted.
f
Press Stop/Exit to exit Menu mode.
46
1
General information
Menu table
1
Using the menu table, you can change the settings in your machine by pressing a and b and OK.
Press Menu, and then according to what is shown on the LCD, press a and b to highlight different
menu options. Press OK to select an option.
In the below example, the paper type setting is changed from Plain to Recycled Paper.
1.General Setup
Level 2
Level 3
1.Paper
1.Paper Type
Descriptions 1
Options
Plain*
Recycled Paper
a
b
Press Menu.
c
Press a or b to choose 1.Paper.
Press OK.
d
Press a or b to choose 1.Paper Type.
Press OK.
e
Press a or b to choose Recycled Paper.
Press OK.
f
Press Stop/Exit.
Press a or b to choose 1.General Setup.
Press OK.
47
1
Chapter 1
1.General Setup
1
1.General Setup
Level 2
Level 3
1.Paper
1.Paper Type
Descriptions 1
Options
Descriptions 2
Page
65
Plain*
Recycled Paper
2.Paper Size
Sets the size of the
paper in the paper
tray.
65
A4*
Letter
Legal
Folio
A5
A5L
B5
Executive
(For Philippines:
Letter*)
2.Ecology
1.Toner Save
You can save toner
using this feature.
On
Increases the page
yield of the toner
cartridge. When you
set Toner Save to
On, print appears
lighter.
Off*
2.Auto Power
Off
If the machine
remains in Deep
Sleep mode for the
time set in the Auto
Power Off settings, it
will automatically go
into Power Off mode.
63
Off*
1 hour
2 hours
4 hours
8 hours
To disable the Power
Off mode, press and
hold
3.LCD
Contrast
—
.
Adjusts the contrast
of the LCD.
-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
The factory settings are shown in Bold with an asterisk.
48
Press a to make the
LCD darker, or press
b to make the LCD
lighter.
General information
1.General Setup (continued)
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
4.Replace
Toner
—
Sets the machine to
continue or stop
printing after the LCD
shows Replace
Toner.
Continue
The machine will
continue printing.
Replace the toner
cartridge with a new
one after the LCD
shows Toner
Ended.
Stop*
The machine will stop
printing. Replace the
toner cartridge with a
new one.
5.Reset
Restores all the
function settings to
factory default.
a Reset
Reset 1
2.Network 1
Restores all network
a Reset
settings to the factory
b Exit
1.Machine
b Exit
default.
3.All
Settings 2
Restores all the
machine settings to
factory default.
Page
1
63
Cancel restore and
exit the menu.
Cancel restore and
exit the menu.
a Reset
b Exit
Cancel restore and
exit the menu.
Restores all the
function settings to
factory default.
The factory settings are shown in Bold with an asterisk.
1
For DCP-1610W, DCP-1615NW and DCP-1616NW.
2
For DCP-1600 and DCP-1601 this menu is 1.All Settings.
49
Chapter 1
2.Copy
1
2.Copy
Level 2
Level 3
Descriptions 1
Options
Descriptions 2
1.Quality
—
You can choose the
Copy resolution for
your type of
document.
Auto*
Auto is the
recommended mode
for ordinary printouts.
Suitable for
documents that
contain both text and
photographs.
Text
Suitable for
documents
containing mainly
text.
Photo
Better copy quality
for photographs.
Receipt
Suitable for copying
receipts.
-nnnno+
Press a to increase
the brightness or
press b to decrease
the brightness.
2.Brightness
—
Adjusts the copy
brightness for copies.
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
3.Contrast
—
Adjust the contrast to
help an image look
sharper and more
vivid.
-nnnno+
-nnnon+
-nnonn+*
Press a to increase
the contrast or press
b to decrease the
contrast.
-nonnn+
-onnnn+
4.ID Copy
1.Quality
You can change the
default settings for ID
Copy.
Auto*
Lighter
(For India:
Lighter*)
2.Brightness
-nnnno+
-nnnon+*
-nnonn+
-nonnn+
-onnnn+
(The default setting
varies depending on
the country.)
The factory settings are shown in Bold with an asterisk.
50
Auto is the standard
mode for ordinary
printouts. If you want
to make it clearer,
choose Lighter.
Press a to increase
the brightness or
press b to decrease
the brightness.
Page
General information
2.Copy (continued)
Level 2
Level 3
4.ID Copy
3.Contrast
Descriptions 1
(Continued)
Options
Descriptions 2
-nnnno+
Press a to increase
the contrast or press
b to decrease the
contrast.
-nnnon+
-nnonn+*
Page
1
-nonnn+
-onnnn+
(The default setting
varies depending on
the country.)
4.2in1/1in1
2in1*
Allows you to use the
2 in 1 (ID) Copy/
85
Copy Options 1 key
or 2 in 1 (ID) Copy 2
key as a doublesided
copy.
1in1
Allows you to use the
2 in 1 (ID) Copy/
86
Copy Options 1 key
or 2 in 1 (ID) Copy 2
key as a one-sided
copy.
The factory settings are shown in Bold with an asterisk.
1
For DCP-1610W, DCP-1615NW and DCP-1616NW.
2
For DCP-1600 and DCP-1601.
3.Printer
1
3.Printer
Level 2
Level 3
Descriptions 1
Options
1.Print
Options
1.Test Print
Prints a test page.
—
2.Auto
Continue
—
If this setting is
enabled, the machine
will automatically
clear a paper size
error, and will use the
paper loaded in the
paper tray.
On*
3.Reset
Printer
—
Restores the printer
settings to the
original factory
default settings.
a Reset
Off
Descriptions 2
Page
Size mismatch is
displayed on the LCD
and printing does not
occur.
b Exit
The factory settings are shown in Bold with an asterisk.
51
Chapter 1
4.Network (For DCP-1610W, DCP-1615NW and DCP-1616NW)
4.Network (For DCP-1610W)
Level 2
Level 3
Descriptions 1
Level 4
1.WLAN
1.TCP/IP
—
1.Boot Method
Descriptions 2
Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address
Enter the IP address.
3.Subnet Mask
Enter the Subnet
mask.
4.Gateway
Enter the Gateway
address.
5.Node Name
Enter the Node
name. (Up to 32
characters)
6.WINS Config
Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server
Specifies the IP
address of the
primary or secondary
WINS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Static
[000-255].[000-255].
[000-255].[000-255]
The factory settings are shown in Bold with an asterisk.
52
Page
1
General information
4.Network (For DCP-1610W) (continued)
Level 2
Level 3
Descriptions 1
Level 4
Descriptions 2
1.WLAN
1.TCP/IP
—
8.DNS Server
(Continued)
(Continued)
Specifies the IP
address of the
primary or secondary
DNS server.
Page
1
Primary
[000-255].[000-255].
[000-255].[000-255]
Secondary
[000-255].[000-255].
[000-255].[000-255]
9.APIPA
On*
Off
Automatically
allocates the IP
address from the
linklocal address
range.
0.IPv6
On
Off*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://support.brother.
com for more
information.
—
2.WLAN
Assistant
(Windows® only)
3.Setup
Wizard
The Setup Wizard
guides you through
the wireless network
configuration. .
—
4.WPS/AOSS
You can easily
configure your
wireless network
settings using the
one-button push
method.
—
5.WPS w/PIN
Code
You can easily
configure your
wireless network
settings using WPS
with a PIN code.
You can configure
your wireless
network settings
using the Brother
CD-ROM.
—
The factory settings are shown in Bold with an asterisk.
53
Chapter 1
4.Network (For DCP-1610W) (continued)
Level 2
Level 3
Descriptions 1
Level 4
Descriptions 2
1.WLAN
6.WLAN Status
—
1.Status
You can see the
current wireless
network status.
2.Signal
You can see the
current wireless
network signal
strength.
3.SSID
You can see the
current SSID.
4.Comm. Mode
You can see the
current
Communication
Mode.
(Continued)
2.Network
Reset
7.MAC Address
Shows the MAC
address of the
machine.
8.Set to
Default
Restore the wireless
network settings to
factory default.
a Reset
9.WLAN Enable
Enable or disable the
wireless LAN
manually.
—
—
Restore all network
settings to the factory
defaults.
a Reset
The factory settings are shown in Bold with an asterisk.
54
b Exit
b Exit
Page
General information
4.Network (DCP-1615NW and DCP-1616NW)
Level 2
Level 3
Descriptions 1
Level 4
Descriptions 2
1.Wired LAN
1.TCP/IP
—
1.Boot Method
Auto*
1
Page
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address
Enter the IP address.
3.Subnet Mask
Enter the Subnet
mask.
4.Gateway
Enter the Gateway
address.
5.Node Name
Enter the Node
name. (Up to 32
characters)
6.WINS Config
Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server
Specifies the IP
address of the
primary or secondary
WINS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Static
[000-255].[000-255].
[000-255].[000-255]
The factory settings are shown in Bold with an asterisk.
55
Chapter 1
4.Network (DCP-1615NW and DCP-1616NW) (continued)
Level 2
Level 3
1.Wired LAN
1.TCP/IP
(Continued)
(Continued)
Descriptions 1
Level 4
Descriptions 2
8.DNS Server
Specifies the IP
address of the
primary or secondary
DNS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Secondary
[000-255].[000-255].
[000-255].[000-255]
9.APIPA
On*
Off
Automatically
allocates the IP
address from the
linklocal address
range.
0.IPv6
On
Off*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://support.brother.
com for more
information.
2.Ethernet
—
—
Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Choose the Ethernet
link mode.
3.Wired
Status
—
—
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
You can see the
current wired network
status.
The factory settings are shown in Bold with an asterisk.
56
Page
General information
4.Network (DCP-1615NW and DCP-1616NW) (continued)
Level 2
Level 3
1.Wired LAN
4.MAC Address Shows the MAC
address of the
machine.
(Continued)
Descriptions 1
Level 4
Descriptions 2
Page
1
—
5.Set to
Default
Restore the wired
network setting to
factory default.
—
6.Wired
Enable
—
—
a Reset
b Exit
On*
Off
Enable or disable the
Wired network
manually.
2.WLAN
1.TCP/IP
—
1.Boot Method
Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address
Enter the IP address.
3.Subnet Mask
Enter the Subnet
mask.
4.Gateway
Enter the Gateway
address.
5.Node Name
Enter the Node
name. (Up to 32
characters)
6.WINS Config
Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server
Specifies the IP
address of the
primary or secondary
WINS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Static
[000-255].[000-255].
[000-255].[000-255]
The factory settings are shown in Bold with an asterisk.
57
Chapter 1
4.Network (DCP-1615NW and DCP-1616NW) (continued)
Level 2
Level 3
Descriptions 1
Level 4
Descriptions 2
2.WLAN
1.TCP/IP
—
8.DNS Server
(Continued)
(Continued)
Specifies the IP
address of the
primary or secondary
DNS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Secondary
[000-255].[000-255].
[000-255].[000-255]
9.APIPA
On*
Off
Automatically
allocates the IP
address from the
linklocal address
range.
10.IPv6
On
Off*
Enable or disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://support.brother.
com for more
information.
(Windows® only)
3.Setup
Wizard
The Setup Wizard
guides you through
the wireless network
configuration.
—
4.WPS/AOSS
You can easily
configure your
wireless network
settings using the
one-button push
method.
—
5.WPS w/PIN
Code
You can easily
configure your
wireless network
settings using WPS
with a PIN code.
You can configure
your wireless
network settings
using the Brother
CD-ROM.
The factory settings are shown in Bold with an asterisk.
58
—
2.WLAN
Assistant
—
Page
General information
4.Network (DCP-1615NW and DCP-1616NW) (continued)
Level 2
Level 3
2.WLAN
6.WLAN Status —
Descriptions 1
Level 4
Descriptions 2
1.Status
You can see the
current wireless
network status.
2.Signal
You can see the
current wireless
network signal
strength.
3.SSID
You can see the
current SSID.
4.Comm. Mode
You can see the
current
Communication
Mode.
(Continued)
Page
1
7.MAC Address Show the MAC
address of the
machine
8.Set to
Default
3.Network
Reset
Restore the wireless
network settings to
factory default.
a Reset
b Exit
9.WLAN Enable Enable or disable the
wireless network
manually.
On
—
a Reset
Restore all network
settings to the factory
defaults.
Off*
b Exit
The factory settings are shown in Bold with an asterisk.
59
Chapter 1
5.Machine Info 1
1
5.Machine Info. 1
Level 2
Level 3
Descriptions 1
Options
1.Serial No.
—
You can check the
serial number of your
machine.
—
2.Version
1.Main
Version
You can check the
firmware version of
your machine.
—
3.Page
Counter
—
You can check the
number of pages the
machine has printed
during its life.
Total
Displays the total
page count.
List
Displays the page
counter for lists.
Copy
Displays the page
counter for copies.
Print
Displays the page
counter for printed
pages.
4.Parts
1.Toner
You can check the
percentage of life that
remains.
—
2.Drum
You can check the
percentage of Drum
life that remains.
Remaining:xxx%
—
Print a list of your
Network settings.
—
Lists your settings.
—
—
Print a list of your
Network settings.
—
—
Prints the result of
wireless LAN
connectivity
diagnosis.
—
You can reset the
drum counter when
you replace the drum
unit with a new one.
Life 2
5.Print
Settings
3
6.User
Descriptions 2
Page
Settings 4
7.Network
Config 3
8.WLAN
Report 3
9.Reset
Drum 5
a Reset
b Exit
The factory settings are shown in Bold with an asterisk.
1
For DCP-1600 and DCP-1601, this menu is 4.Machine Info..
2
For DCP-1600 and DCP-1601, this menu is 5.Parts Life.
3
For DCP-1610W, DCP-1615NW and DCP-1616NW.
4
For DCP-1600 and DCP-1601, this menu is 4.User Settings.
5
For DCP-1600 and DCP-1601, this menu is 6.Reset Drum.
60
94
General information
Entering text
1
1
MFC models
1
When setting certain menu selections, such as the Station ID and the name of a Speed Dial, you
will need to type text characters. The dial pad keys have letters printed on them. The keys: 0, #
and l do not have printed letters because they are used for special characters.
Press the appropriate dial pad key the number of times shown in this reference table to access
the character you want.
Press
number
Key on
dial pad
once
twice
three
times
four
times
five
times
six
times
seven
times
eight
times
nine
times
1
@
.
/
1
@
.
/
1
@
2
a
b
c
A
B
C
2
a
b
3
d
e
f
D
E
F
3
d
e
4
g
h
i
G
H
I
4
g
h
5
j
k
l
J
K
L
5
j
k
6
m
n
o
M
N
O
6
m
n
7
p
q
r
s
P
Q
R
S
7
8
t
u
v
T
U
V
8
t
u
9
w
x
y
z
W
X
Y
Z
9
For options that do not allow lower case characters, use the following table.
Press number
Key on dial
pad
once
twice
three times
four times
five times
2
A
B
C
2
A
3
D
E
F
3
D
4
G
H
I
4
G
5
J
K
L
5
J
6
M
N
O
6
M
7
P
Q
R
S
7
8
T
U
V
8
T
9
W
X
Y
Z
9
61
Chapter 1
Inserting spaces
To enter a space in a fax number, press c once between numbers. To enter a space in a name,
press c twice between characters.
Making corrections
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the
incorrect character, and then press Clear.
Repeating letters
To enter a letter on the same key as the previous letter, press c to move the cursor right before
pressing the key again.
Special characters and symbols
Press l, # or 0, then press d or c to move the cursor to the symbol or character you want. Press
OK to choose it. The symbols and characters below will appear depending on your menu
selection.
Press l
for
(space) ! " # $ % & ’ ( ) l + , - . / m
Press #
for
:;<=>?@[]^_
Press 0
for
ÄËÖÜÀÇÈÉ0
DCP models
When setting certain options, such as the Network Key, you must enter characters on the
machine.
 Hold down or repeatedly press a or b to select a character from this list:
0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ(space)!"#$
%&'()*+,-./:;<=>?@[]^_
 Press OK when the character or symbol you want is displayed, and then enter the next
character.
 Press Clear to delete characters entered incorrectly.
62
1
General information
Ecology features
Deep Sleep mode
1
1
If the machine does not receive any jobs for a
certain length of time, the machine will go into
Deep Sleep mode automatically and the LCD
will show Deep Sleep. The machine will
wake up when it receives a print job or fax
(MFC models only).
Toner Settings
a
Press Menu and then press a or b to
choose 1.General Setup.
Press OK.
b
Press a or b to choose 2.Ecology.
Press OK.
c
Press a or b to choose 2.Auto Power
Off.
Press OK.
d
e
Press a or b to choose how many hours
before the machine goes into Power Off
mode. Choose 1 hour, 2 hours,
4 hours, 8 hours or Off.
Press OK.
1
You can set the machine to continue printing
after the LCD shows Replace Toner.
The machine will continue printing until the
LCD shows Toner Ended.
(For MFC-1900, MFC-1901 and
MFC-1905)
Press Menu, 1, 7 and go to step c.
1
(For MFC-1910W, MFC-1911NW and
MFC-1916NW)
Press Menu, 1, 8 and go to step c.
If the machine remains in Deep Sleep mode
for the time set in the Auto Power Off settings,
it will automatically go into Power Off mode.
Power Off mode is the lowest power
consumption mode, which achieves a power
consumption of approximately 0.5 W. To
disable the Power Off mode, press and hold
.
1
Toner Setting
(Continue mode)
a
Auto Power Off
(For DCP models)
1
(For DCP models)
Press Menu and then press a or b to
choose 1.General Setup.
Press OK.
b
Press a or b to choose 4.Replace
Toner.
Press OK.
c
Press a or b to choose Continue or
Stop.
Press OK.
d
Press Stop/Exit.
NOTE
• If you continue printing in the Continue
mode, the print may appear lighter.
• After replacing the toner cartridge with a
new one, the Continue mode will go back
to the default setting (Stop).
Press Stop/Exit.
63
Chapter 1
Receiving faxes in Continue
Mode (For MFC models)
The machine can store received faxes in the
memory if you choose Continue mode when
the LCD shows Replace Toner. When
received faxes are printed in Continue mode
the LCD will ask if the print quality of the fax
is OK. If the quality is not good, choose 2.No.
The machine will keep the faxes stored in the
memory so you can reprint them after you
replace the toner cartridge with a new one. If
the print quality is good, choose 1.Yes. The
LCD will ask if you want to delete the printed
faxes from the memory. If you choose not to
delete them, you will be asked again after you
replace the toner cartridge with a new one.
NOTE
If you turn off the machine, faxes stored in
the memory will be lost.
64
1
2
Paper Setting
Paper settings
Paper Type
a
2
b
Press a or b to choose 1.Paper.
Press OK.
c
Press a or b to choose 2.Paper Size.
Press OK.
d
Press a or b to choose A4, Letter,
Legal, Folio, A5, A5 L , B5 or
Executive.
Press OK.
e
Press Stop/Exit.
2
2
(For MFC-1900, MFC-1901 and
MFC-1905)
Press Menu, 1, 2, 1 and go to step d.
(For MFC-1910W, MFC-1911NW and
MFC-1916NW)
Press Menu, 1, 3, 1 and go to step d.
(For DCP models)
Press Menu and then press a or b to
choose 1.General Setup.
Press OK.
b
Press a or b to choose 1.Paper.
Press OK.
c
Press a or b to choose 1.Paper Type.
Press OK.
d
Press a or b to choose Plain or
Recycled Paper.
Press OK.
e
Press Stop/Exit.
Paper Size
a
2
(For MFC-1900, MFC-1901 and
MFC-1905)
Press Menu, 1, 2, 2 and go to step d.
(For MFC-1910W, MFC-1911NW and
MFC-1916NW)
Press Menu, 1, 3, 2 and go to step d.
(For DCP models)
Press Menu and then press a or b to
choose 1.General Setup.
Press OK.
65
2
Chapter 2
Acceptable paper
Types of paper to avoid
2
IMPORTANT
Print quality may vary according to the type of
paper you are using.
Paper capacity of the paper
tray
Paper size
A4, Letter, Legal, Folio, A5,
A5(Long Edge), B5,
Executive
Paper types
Plain paper,
Recycled paper
No. of sheets
up to 150 (80 g/m 2)
Paper weight
65 - 105 g/m2
Some important guidelines when selecting
paper are:
 DO NOT use inkjet paper because it may
cause a paper jam or damage your
machine.
 Preprinted paper must use ink that can
withstand the temperature of the
machine’s fusing process 200 °C.
Some types of paper may not perform well
or may cause damage to your machine.
DO NOT use paper:
• that is highly textured
2
• that is extremely smooth or shiny
• that is curled or warped
1
1
1
A curl of 2 mm or greater may cause
jams to occur.
• that is coated or has a chemical finish
• that is damaged, creased or folded
• that exceeds the recommended weight
specification in this guide
• with tabs and staples
• with letterheads using low temperature
dyes or thermography
• that is multipart or carbonless
• that is designed for inkjet printing
If you use any of the types of paper listed
above, they may damage your machine.
This damage may not be covered under
any Brother warranty or service
agreement.
66
2
3
Loading documents
How to load
documents
c
3
Adjust the paper guides (1) to fit the
width of your document.
3
(1)
You can send a fax (MFC models), make
copies, and scan from the ADF (Automatic
Document Feeder) and the scanner glass.
Using the automatic
document feeder (ADF)
(For ADF models)
3
3
The ADF can hold up to 10 pages and feeds
each sheet individually. We recommend you
use standard 80 g/m2 paper and always fan
the pages before putting them in the ADF.
Document Sizes Supported
Size:
3
A4, Letter, Legal, Folio
How to load documents
a
Using the scanner glass
Lift up and unfold the ADF document
output support flap.
You can use the scanner glass to fax (MFC
models), copy or scan pages of a book, one
page at a time.
Document Sizes Supported
3
Length:
Width:
Up to 215.9 mm
Weight:
Up to 2.0 kg
a
3
Up to 300.0 mm
How to load documents
b
3
3
Lift the document cover.
Load your document face down, top
edge first in the ADF until the LCD
message changes.
67
Chapter 3
b
Using the document guidelines on the
left and top, place the document
face down in the upper left corner of the
scanner glass.
c
Close the document cover.
NOTE
If the document is a book or is thick do not
slam the cover or press on it.
68
4
Sending a fax (MFC models)
How to send a fax
The following steps show you how to send a
fax.
a
Press FAX.
4
After placing the document on the
scanner glass, close the document
cover.
4
NOTE
• To use the scanner glass, the ADF must
be empty.
• If you want to change the fax resolution,
press b or Resolution and then press a or
b or Resolution to choose the fax
resolution.
b
Load your document.
 If you are sending from the ADF:
c
d
Enter the fax number.
Press Start to send a fax.
Cancelling a fax in progress
 If you are sending from the scanner
glass:
4
4
Press Stop/Exit to cancel the fax. If you
press Stop/Exit while the machine is dialling
or sending, the LCD will ask you to confirm.
Dialing #XXX
1.Clear 2.Exit
Sending #XXX P01
1.Clear 2.Exit
Press 1 to cancel the fax.
69
Chapter 4
Broadcasting
4
b
Broadcasting lets you send the same fax
message to more than one fax number. You
can include Speed Dial numbers and up to 20
manually dialled numbers in the same
broadcast.
Before you begin the broadcast
 Choose the fax number or name
being dialled, and press OK.
 Choose the broadcast job number,
and press OK.
c
Press 1 to cancel the fax number or
Broadcast job number you chose in
step b, or press 2 to exit without
cancelling.
If you chose to only cancel the fax
currently being sent in step b, the LCD
will ask you if you want to cancel the
broadcast job. Press 1 to clear the whole
broadcast job or 2 to exit.
d
Press Stop/Exit.
4
Speed Dial numbers must be stored in the
machine's memory before they can be used
in a broadcast. (See Storing Speed Dial
numbers on page 74.)
How to broadcast a fax
a
b
Load your document.
c
Repeat step b until you have entered
all the fax numbers you want to
broadcast to.
d
Press Start.
4
Enter a number.
Press OK.
You can use a Speed Dial number, or a
number manually entered using the dial
pad. (See How to dial on page 75.)
After the broadcast is finished the machine
will print a broadcast report to let you know
the results.
Cancelling a Broadcast in progress
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a
70
(MFC models for India and Vietnam)
Press Menu, 2, 6.
(MFC models for other countries)
Press Menu, 2, 7.
The LCD will display the Broadcast job
number followed by the fax number or
name being dialled (for example, #001
0123456789). Press a or b to show the
broadcast job number (for example,
Broadcast#001).
Press a or b to choose one of the
following:
4
5
Receiving a fax (MFC models)
5
Receive modes
5
You must choose a receive mode depending on the external devices and telephone services you
have on your line.
Choosing the receive mode
5
By default, your machine will automatically receive any faxes that are sent to it. The diagrams
below will help you choose the correct mode. (For detailed information about the receive modes,
see Menu table on page 10.)
Do you want to use the telephone features of your machine (if available) or
an external telephone or external telephone answering device connected on the
same line as the machine?
Yes
No
Are you using the voice message function of
an external telephone answering device?
Fax Only
No
Do you want the machine to answer fax and
telephone calls automatically?
No
Manual
Fax/Tel
Yes
External TAD
Yes
To set the receive mode follow the instructions below:
a
(For MFC-1900, MFC-1901 and MFC-1905)
Press Menu, 0, 1.
(For MFC-1910W, MFC-1911NW and MFC-1916NW)
Press Menu, 2, 1, 1.
b
Press a or b to choose the receive mode.
Press OK.
c
Press Stop/Exit.
The LCD will display the current receive mode.
NOTE
If you cannot change the Receive Mode option, make sure the Distinctive Ring or Faxability
feature is set to Off. (the Distinctive Ring and Faxability features are available in some
countries.)
71
5
Chapter 5
Receive Mode settings
Ring Delay
5
5
The Ring Delay setting sets the number of
times the machine rings before it answers in
Fax Only and Fax/Tel modes.
Because the F/T ring is made by the machine,
extension and external (MFC-1900, MFC1901, MFC-1910W and MFC-1911NW)
telephones will not ring.
a
b
Make sure you are in FAX mode.
c
Press a or b to choose how long the
machine will ring to alert you that you
have a voice call.
Press OK.
d
Press Stop/Exit.
If you have external or extension telephones
on the same line as the machine, choose the
maximum number of rings. (See Fax Detect
on page 72.)
a
b
c
d
Make sure you are in FAX mode.
(For MFC-1900, MFC-1901 and
MFC-1905)
Press Menu, 2, 1, 1.
(For MFC-1910W, MFC-1911NW and
MFC-1916NW)
Press Menu, 2, 1, 2.
Fax Detect
Press a or b to choose how many times
the line rings before the machine
answers (02-10 for Australia, 01-10 for
New Zealand, 00-10 for some
countries).
Press OK.
If Fax Detect is On:
5
(MFC-1905 and MFC-1916NW)
If Fax Detect is Semi:
When somebody calls your machine, you and
your caller will hear the normal telephone ring
sound. The number of rings is set by the Ring
Delay setting.
The machine will only receive a fax call
automatically if you answered it using the
machine’s handset.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T ring (a fast
double-ring) for the time you have set in the
F/T Ring Time setting. If you hear the F/T ring
it means that you have a voice caller on the
line.
If Fax Detect is Off:
72
5
5
The machine can receive a fax automatically,
even if you answer the call. When you see
Receiving on the LCD or hear a click on the
phone line through the handset you are
using, just replace the handset. Your
machine will do the rest.
Press Stop/Exit.
F/T Ring Time
(Fax/Tel mode only)
(For MFC-1900, MFC-1901 and
MFC-1905)
Press Menu, 2, 1, 2.
(For MFC-1910W, MFC-1911NW and
MFC-1916NW)
Press Menu, 2, 1, 3.
5
5
If you are at the machine and answer a fax
call first by lifting the external handset (MFC1900, MFC-1901, MFC-1910W and MFC1911NW) or the machine (MFC-1905 and
MFC-1916NW), press Start and then press 2
to receive a fax.
Receiving a fax (MFC models)
NOTE
• If you send faxes from a computer on the
same telephone line and the machine
intercepts them, set Fax Detect to Off.
• We do not recommend having a PC and a
fax machine on the same line.
a
b
Make sure you are in FAX mode.
(For MFC-1900, MFC-1901 and
MFC-1905)
Press Menu, 2, 1, 3.
(For MFC-1910W, MFC-1911NW and
MFC-1916NW)
Press Menu, 2, 1, 4.
c
Press a or b to choose On, Semi
(MFC-1905 and MFC-1916NW) or Off.
Press OK.
d
Press Stop/Exit.
5
73
6
Dialling and storing numbers
(MFC models)
Storing numbers
6
You can set up your machine for easy dialling
by storing Speed Dials. When you dial a
speed dial number, the LCD shows the name,
if you stored it, or the number.
Storing Speed Dial numbers
Changing or Deleting Speed
Dial numbers
You can change or delete a Speed Dial
number that has already been stored.
a
6
(For other countries)
Press Menu, 2, 4, 1.
Enter the Speed Dial number you want
to change or delete, then press OK.
You can store your frequently used numbers
as Speed Dial numbers, so that when you dial
you will only have to press a few keys
(
(Address Book) twice, the two digit
number and Start). The machine can store
99 Speed Dial numbers (01- 99).
a
b
c
Do one of the following:
 Enter the name using the dial pad
(up to 15 characters). For help
entering characters, see Entering
text on page 61.
Press OK.
 Press OK to store the number
without a name.
d
74
b
To store another Speed Dial number, go
to step a.
Do one of the following:
 Press 1 to choose Change to edit the
number or name.
Press
(Address Book) twice and
enter a two digit Speed Dial location
number (01-99).
If a number is not stored there, the LCD
shows Register Now?
Press 1 to choose Yes.
Enter the telephone or fax number (up to
20 characters).
Press OK.
(For India and Vietnam)
Press Menu, 2, 3, 1.
Go to step c.
 Press 2 to choose Clear to delete
all information in a Speed Dial
number.
When Erase This Data? appears,
press 1 to choose Yes to confirm.
Go to step d.
c
Edit the number or the name. When you
are finished editing, press OK.
d
Press Stop/Exit.
6
6
Dialling and storing numbers (MFC models)
How to dial
c
Press the dial pad key for the first few
letters of the name. (Use the chart on
Entering text on page 61 to help you
enter letters.)
Press OK.
d
Press a or b to scroll until you find the
name you are looking for.
Press OK.
e
Press Start.
6
You can dial in any of the following ways.
Manual dialling
6
Use the dial pad to enter all the digits of the
telephone or fax number.
Speed dialling
6
NOTE
• If you do not enter a letter and press OK in
step c, all registered names will appear.
Press a or b to scroll until you find the
name you are looking for.
Press
(Address Book) twice and enter
the two digit Speed Dial number. (See Storing
Speed Dial numbers on page 74.)
6
• If the LCD shows No Contact Found
when you enter the first few letters of the
name, it means that a name for the letters
is not stored.
Redial
6
Ensuring the line is not in use, press Redial
to find the last 20 numbers you recently
dialled. Press Redial or a or b to scroll until
you find the number you want to call again.
Press OK and then press Start to send a fax.
Two digit number
NOTE
If the LCD shows Register Now? when
you enter a Speed Dial number, it means
that a number is not stored there.
Search
6
You can search alphabetically for names you
have stored in the Speed Dial memories.
(See Storing Speed Dial numbers
on page 74.)
a
Make sure you are in FAX mode.
b
Press
(Address Book).
75
Chapter 6
Caller ID
(except India and Vietnam)
6
The Caller ID feature lets you use the Caller
ID subscriber service offered by many local
telephone companies. This service shows the
telephone number, or name if it is available,
of your caller as the line rings.
Viewing the Caller ID List
Your machine stores information for the last
thirty calls in the Caller ID list. You can view
or print this list. When the 31st call comes in
to the machine, it replaces information about
the first call.
a
(For Australia, New Zealand and
Singapore)
Press Menu, 2, 0, 3.
(For other countries)
Press Menu, 2, 0, 2.
The screen displays the current setting.
b
Press a or b to choose Display #.
Press OK.
The Caller ID of the last call will appear
on the display.
If no ID is stored, the beeper will sound
and No Caller ID will appear on the
display. Go to step d.
c
Press a or b to scroll through the Caller
ID memory to choose the Caller ID you
want to view, and then press OK.
The LCD will show the caller’s number
and the date and time of the call.
d
To finish viewing, press Stop/Exit.
76
6
7
Using PC-FAX (MFC models)
PC-FAX Receive
(For Windows® only)
If you turn on the PC-Fax Receive feature
your machine will store received faxes in
memory and send them to your PC
automatically. You can then use your PC to
view and store these faxes.
Even if you have turned off your PC (at night
or on the weekend, for example), your
machine will receive and store your faxes in
its memory. The LCD will show the number of
stored faxes received, for example:
PC Fax Msg:001
When you start your PC and the PC-Fax
Receiving software runs, your machine
transfers your faxes to your PC automatically.
a
(For other countries)
Press Menu, 2, 6, 1.
b
Press a or b to choose On (or Off).
Press OK.
c
The LCD shows a reminder to start the
PC-FAX Receive program on your
computer. If you have started the PCFAX Receive program, press OK. If you
have not started the PC-FAX Receive
program, see Software and Network
User’s Guide.
d
Do one of the following:
 If you do not want to change the
current setting, press 2.
e
Press a or b to choose On or Off.
Press OK.
f
Press Stop/Exit.
Windows® 7)
(Start) > All Programs >
Brother > Brother Utilities , and then click
the drop-down list and select your model
name (if not already selected). Click PC-FAX
Receive in the left navigation bar, and then
click Receive.
(Windows® 8)
Click
7
 If you want to change the current
setting, press 1 and press a or b to
choose your computer. Press OK.
Do one of the following:
Click
(For India and Vietnam)
Press Menu, 2, 5, 1.
7
To transfer the received faxes to your PC you
must have the PC-FAX Receiving software
running on your PC.
(Windows® XP, Windows Vista® and
7
NOTE
• If you choose Backup Print On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case there is a power
failure before the fax is transferred to your
PC.
• The faxes stored in the machine’s memory
will be deleted.
(Brother Utilities), and then
click the drop-down list and select your model
name (if not already selected). Click PC-FAX
Receive in the left navigation bar and then
click Receive.
Then, complete the following steps on your
machine.
77
Chapter 7
NOTE
• Before you can set up PC-Fax Receive
you must install the MFL-Pro Suite
software on your PC. Make sure your PC
is connected and turned on. (For more
information, see Software and Network
User’s Guide.)
• If your machine has an error and is unable
to print faxes from memory, you can use
this setting to transfer your faxes to a PC.
(See Transferring your faxes or Fax
Journal report (MFC models)
on page 109.)
• PC-Fax Receive is not supported in Mac
OS.
78
Using PC-FAX (MFC models)
PC-FAX sending
7
You can send a file created in any application on your PC as a standard fax.
NOTE
• The PC-FAX software can only send Black & White fax documents in A4 size.
• Please install MFL-Pro Suite software, connect your machine and PC before using PC-FAX
sending.
Sending a file as a PC-FAX
a
b
7
Create a file in any application on your PC.
Click File, then Print.
The Print dialog box appears:
7
79
Chapter 7
c
Choose Brother PC-FAX as your printer, and then click Print.
The PC-FAX sending dialog box appears:
2
1
d
1
Dial Pad
2
Address Book
Enter a fax number using any of the following methods:
 Use the dial pad to enter the number and then click the
button.
 Click the Address Book button, and then choose a member or group from the Address
Book.
If you make a mistake, click All Clear to delete all the entries.
e
To include a cover page, click the Add Cover Page check box.
NOTE
You can also click the cover page
f
icon to create or edit a cover page.
Click Start to send the fax.
NOTE
• If you want to cancel the fax, click Cancel or press Stop/Exit on the machine's control panel.
• If you want to redial a number, click Redial to cycle through the last five fax numbers, and then
click Start.
80
8
Telephone and external devices
(MFC models)
Voice operations
(MFC-1905 and
MFC-1916NW)
8
Voice calls can be made with the handset by
using the dial pad or by pressing
(Address
Book) twice and entering a two digit Speed
Dial number.
Making a telephone call
a
Pick up the handset.
b
When you hear the dial tone, enter a
number using the dial pad or press
8
(Address Book) twice and enter a
two digit Speed Dial number.
c
Replace the handset to hang up.
Hold
a
b
Press Hook/Hold to put a call on Hold.
You can replace the handset without
disconnecting the call.
Pick up the machine’s handset to
release the call from Hold.
8
Connecting an external
TAD (MFC-1900,
MFC-1901, MFC-1910W
and MFC-1911NW)
8
8
You can connect an external Telephone
Answering Device (TAD) to the same line as
your machine. When the TAD answers a call,
your machine will “listen” for the CNG (fax
calling) tones sent by a sending fax machine.
If it hears them it will take over the call and
receive the fax. If it does not hear them, it will
let your TAD take a voice message and the
display will show Telephone.
The external TAD must answer within four
rings (we recommend you set it to two rings).
This is because your machine cannot hear
the CNG tones until the external TAD has
picked up the call. The sending machine will
send CNG tones for only eight to ten seconds
longer. We do not recommend using the toll
saver feature on your external TAD if it needs
more than four rings to activate it.
NOTE
If you have problems receiving faxes,
reduce the ring delay setting on your
external TAD to one or two rings.
81
8
Chapter 8
Connections
8
The external TAD must be connected as
shown in the illustration below.
Recording an outgoing
message (OGM)
a
Record 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
b
Limit your speaking to 20 seconds.
For example: “After the beep, leave a
message.”
1
EXT.
1
LINE
8
2
(Example
for Australia)
1
TAD
2
Protective Cap
Before you connect an external TAD
(telephone answering device), remove the
protective cap (2) from the EXT. jack on the
machine.
a
Set your external TAD to one or two
rings. (The machine’s Ring Delay
setting does not apply.)
b
Record the outgoing message on your
external TAD.
c
d
Set the TAD to answer calls.
82
Set the Receive Mode on your machine
to External TAD. (See Receive
modes on page 71.)
Multi-line connections
(PABX)
Most offices use a central telephone system.
Brother recommends that all our Fax/MFC
machines are connected to a discreet
(dedicated) line. Although a particular Private
Automatic Branch Exchange (PABX) may
appear to work with a particular model of fax
machine, we cannot guarantee that the unit
will operate correctly.
While it is often relatively simple to connect a
fax machine to a PABX, we suggest that you
contact the company that installed your
telephone system and ask them to connect
the fax machine for you.
Brother does not recommend the use of a
PABX line. PABX limitations in general can
cause some functions of the fax machine not
to work correctly.
8
Telephone and external devices (MFC models)
External and extension
telephones
For Fax/Tel mode only
8
NOTE
You can connect a separate telephone
directly to your machine as shown in the
diagram below.
When the machine is in Fax/Tel mode, it will
use the F/T Ring Time (fast double-ringing) to
alert you to pick up a voice call.
(for MFC-1900, MFC-1901, MFC-1910W and
MFC-1911NW)
Connection of an external telephone is
available for MFC-1900, MFC-1901,
MFC-1910W and MFC-1911NW.
Connecting an external or
extension telephone
8
Lift the external telephone’s handset, and
then press Hook to answer.
(For MFC-1905 and MFC-1916NW)
8
Lift the machine's handset.
Using a non-Brother cordless
external handset
8
If your non-Brother cordless telephone is
connected to the telephone line cord (see
Connecting an external or extension
telephone on page 83) and you typically carry
the cordless handset elsewhere, it is easier to
answer calls during the Ring Delay.
1
2
EXT.
LINE
3
(Example
for Australia)
1
Extension telephone
2
External telephone
3
Protective Cap
If you let the machine answer first, lift the
cordless handset and then go to the machine
so you can press Hook to transfer the call to
the cordless handset.
NOTE
Not all brands of cordless telephones are
compatible for use with your machine.
Before you connect an external telephone,
remove the protective cap (3) from the EXT.
jack on the machine.
When you are using an external telephone,
the LCD shows Telephone.
83
8
9
Making copies
How to copy
a
(For MFC models)
Press COPY.
9
After placing the document on the
scanner glass, close the document
cover.
9
NOTE
To use the scanner glass, the ADF must
be empty.
c
b
Load your document.
(For MFC models)
Use the dial pad to enter the number of
copies you want (up to 99 copies).
 (For ADF models)
(For DCP models)
Press a or b to enter the number of
copies you want.
If you are copying from the ADF:
d
 If you are copying from the scanner
glass:
84
Press Start to copy.
Making copies
ID COPY
d
(For MFC models)
Press COPY.
e
(For MFC models)
Enter the number of copies you want.
(For DCP models)
Press a or b to enter the number of
copies you want.
f
(For MFC models, DCP-1600 and DCP1601)
Press 2 in 1 (ID) Copy.
9
You can make one-sided and double-sided
copies of identification cards.
Double-sided ID copy can copy both sides of
your identification card onto one page,
keeping the original card size.
The result of the double-sided ID copy is
shown below.
NOTE
• You can copy an identification card to the
extent permitted under applicable laws.
(See Product Safety Guide)
(For DCP-1610W, DCP-1615NW and
DCP-1616NW)
Press 2 in 1 (ID) Copy/Copy Options.
Press a or b to choose Double-sided
ID.
• For the ID Copy Settings,
(For MFC models) See 3.Copy
on page 33.
g
(For DCP models) See 2.Copy
on page 50.
Double-sided ID copy
a
Place your identification card face down
as shown, towards the top left of the
scanner glass. Make sure the
identification card is at least 4 mm from
the edges of the glass (1).
9
(For MFC models)
Press Menu, 3, 4 and go to step c.
1
(For DCP models)
Press Menu and then press a or b to
choose 2.Copy.
Press OK.
b
Press a or b to choose 4.ID Copy.
Press OK.
c
Press a or b to choose 4.2in1/1in1.
Press OK.
Press a or b to choose 2in1 for doublesided copy as a default.
Press OK and then press Stop/Exit.
1
4 mm or greater (top, left)
85
9
Chapter 9
h
i
Press Start to scan.
c
Press a or b to choose 4.2in1/1in1.
Press OK.
Press a or b to choose 1in1 for onesided copy as a default.
Press OK and then press Stop/Exit.
d
(For MFC models)
Press COPY.
e
(For MFC models)
Enter the number of copies you want.
Turn over your identification card and
place it at the left side of the scanner
glass.
1
(For DCP models)
Press a or b to enter the number of
copies you want.
1
j
4 mm or greater (top, left)
a
(For MFC models)
Press Menu, 3, 4 and go to step c.
(For DCP models)
Press Menu and then press a or b to
choose 2.Copy.
Press OK.
b
86
Press a or b to choose 4.ID Copy.
Press OK.
Place your identification card face down
on the scanner glass.
g
(For MFC models, DCP-1600 and DCP1601)
Press 2 in 1 (ID) Copy.
(For DCP-1610W, DCP-1615NW and
DCP-1616NW)
Press 2 in 1 (ID) Copy/Copy Options.
Press a or b to choose Double-sided
ID.
Press Start to scan.
One-sided ID copy
f
9
Making copies
Other copies
9
Make sure you are in COPY mode. Use the Options, Copy Options or 2 in 1 (ID) Copy/Options
key to quickly set the following copy settings only for the next copy.
Press
(MFC models)
9
Menu selections
Options
Press a or b, then press OK
(For MFC models)
Press a, b, d or c, then press OK
(DCP-1600 and DCP-1601)
9
(For DCP models)
Press a or b, then press OK.
(DCP-1610W, DCP-1615NW
and DCP-1616NW)
Press a or b to choose Copy Options.
9
Press OK.
Press a or b, then press OK.
9
Quality
Auto*
Text
Photo
Receipt
Stack/Sort
Stack*
Brightness
-onnnn+
Sort
-nonnn+
-nnonn+*
-nnnon+
-nnnno+
Contrast
-onnnn+
-nonnn+
-nnonn+*
-nnnon+
-nnnno+
The factory settings are shown in Bold with an asterisk.
87
Chapter 9
Press
(MFC models)
9
Menu selections
Options
Press a or b, then press OK
(For MFC models)
Press a, b, d or c, then press OK
(DCP-1600 and DCP-1601)
9
(For DCP models)
Press a or b, then press OK.
(DCP-1610W, DCP-1615NW
and DCP-1616NW)
Press a or b to choose Copy Options.
9
Press OK.
Press a or b, then press OK.
Enlarge/Reduce
100%*
97% LTRiA4
94% A4iLTR
91% Full Page
85% LTRiEXE
83% LGLiA4 1
78% LGLiLTR 1
70% A4iA5
50%
Custom(25-400%)
Auto 2
200%
141% A5iA4
104% EXEiLTR
Page Layout
Off(1 in 1)*
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
The factory settings are shown in Bold with an asterisk.
1
"LGLiLTR" and "LGLiA4" are displayed on ADF models only.
2
Auto sets the machine to calculate the reduction ratio that best fits the size of paper. Auto is only available when using
the ADF.
88
10
How to scan to a computer
10
Scanning a document as a PDF file using
ControlCenter4
10
(For further information: Software and Network User’s Guide.)
NOTE
The screens on your PC may vary depending on your model.
ControlCenter4 is a software utility that lets you quickly and easily access the applications you use
most often.
a
b
Load your document.
Do one of the following:
(Windows® XP, Windows Vista® and Windows® 7)
Click
(Start) > All Programs > Brother > Brother Utilities, and then click the
drop-down list and select your model name (if not already selected). Click SCAN in the left
navigation bar, and then click ControlCenter4.
The ControlCenter4 application will open.
(Windows® 8)
Click
(Brother Utilities), and then click the drop-down list and select your model
name (if not already selected). Click SCAN in the left navigation bar, and then click
ControlCenter4.
The ControlCenter4 application will open.
89
10
Chapter 10
c
Choose Advanced Mode and then click OK.
d
Click File in the Scan tab.
90
How to scan to a computer
1
2
3
4
5
1 Choose PDF (*.pdf) from the File Type drop-down list.
2 You can enter the file name you want to use for the document.
3 When you select the Folder check box, you can save the file to the default folder, or
choose your preferred folder by clicking the
(Browse) button.
When you select the SharePoint check box, you can save the file to a SharePoint library
by entering the address.
4 You can choose a scanning resolution from the Resolution drop-down list.
5 You can choose the document size from the Document Size drop-down list.
e
Click Scan.
The machine starts the scanning process. The folder where the scanned data is saved will
open automatically.
91
10
Chapter 10
Scanning using the SCAN key
10
NOTE
If you want to use this function, install the MFL-Pro Suite and connect the machine to your PC
with a USB cable.
a
Load your document. (See How to load documents on page 67.)
b
Press
c
Press a or b to choose Scan to PC.
Press OK.
d
Press a or b to choose a scan type (File, E-mail or Image.)
Press OK.
e
Do one of the following:
(SCAN).
 To change the scan settings, press a or b to select Yes, and then press OK. Following
the LCD instructions to change the settings you want.
 To use the default scan settings, press a or b to select No, and then press OK.
f
Press Start.
The machine starts the scanning process.
SCAN key settings
You can change your machine’s SCAN key settings using ControlCenter4.
a
Do one of the following:
(Windows® XP, Windows Vista ® and Windows® 7)
Click
(Start) > All Programs > Brother > Brother Utilities, and then click the
drop-down list and select your model name (if not already selected). Click SCAN in the left
navigation bar, and then click ControlCenter4.
The ControlCenter4 application will open.
(Windows® 8)
Click
(Brother Utilities), and then click the drop-down list and select your model
name (if not already selected). Click SCAN in the left navigation bar, and then click
ControlCenter4.
The ControlCenter4 application will open.
b
92
Click the Device Settings tab.
10
How to scan to a computer
c
Click Device Scan Settings.
d
Choose the File tab. You can change the default settings.
1
2
3
4
10
5
1 You can choose the file type from the drop-down list.
2 You can enter the file name you want to use for the document.
3 You can save the file to the default folder, or choose your preferred folder by clicking the
(Browse) button.
4 You can choose a scanning resolution from the Resolution drop-down list.
5 You can choose the document size from the Document Size drop-down list.
e
Click OK.
93
A
Troubleshooting and other
information
Consumable items
A
The drum unit and toner cartridge are two separate consumables. Make sure both are installed as
an assembly. For more information on how to replace the consumable items, see the instructions
included with the drum unit for replacing the drum unit or see the instructions printed on the box
of the toner cartridge for replacing the toner cartridge.
Toner cartridge
Drum unit
Model Name:
(For Vietnam) TN-1010
Model Name:
(For Vietnam) DR-1010
(For India) TN-1020
(For India) DR-1020
(For Australia and other Oceania countries)
TN-1070
(For Australia and other Oceania countries)
DR-1070
(For Indonesia) TN-1080
(For Indonesia) DR-1080
(For other Asian countries) TN-1000
(For other Asian countries) DR-1000
IMPORTANT
• Brother machines are designed to work with toner of a particular specification and will work to
a level of optimum performance when used with Brother Original toner cartridges. Brother
cannot guarantee this optimum performance if toner or toner cartridges of other specifications
are used. The machine may not detect toner or toner cartridges of other specifications correctly
but may instead detect such items as standard yield toner cartridges. Brother does not
therefore recommend the use of cartridges other than Brother Original cartridges with this
machine, or the refilling of empty cartridges with toner from other sources. If damage is caused
to the drum unit or other parts of this machine as a result of the use of toner or toner cartridges
other than Brother Original products due to the incompatibility or lack of suitability of those
products with this machine, any repairs required as a result may not be covered by the
warranty.
• For best performance, use a Brother Original drum and toner cartridge. Printing with a third
party drum unit or toner cartridge may reduce not only the print quality but also the quality and
life of the machine itself. Warranty coverage may not apply to problems caused by the use of
a third party drum or toner cartridge.
94
A
Troubleshooting and other information
NOTE
• Discard used consumable items according to local regulations, keeping it separate from
domestic waste. If you have questions, call your local waste disposal office. Be sure to reseal
the consumable items tightly so that the material inside does not spill.
• The projected life for each of the toner cartridges is based on ISO/IEC 19752. Frequency of
replacement will vary depending on the complexity of printed pages, percentage of coverage
and type of media used.
• Availability of toner cartridges differs from one country to another. Visit the Brother Solutions
Center at http://support.brother.com or contact your local Brother office for further details.
A
95
Identifying your problem
First, check the following:
 The machine's power cord is connected correctly and the machine is turned on.
 All of the protective parts have been removed.
 Paper is inserted correctly in the paper tray.
 The interface cables are securely connected to the machine and the computer.
If you did not solve your problem with the above checks, identify your problem and then go to the
page suggested below:
Telephone and Fax problems (MFC models) on page 99
Improving the print quality on page 101
If the machine is connected to a PC, depending on the error, a Popup application may appear on
the PC.
Follow the instructions on the screen to resolve the error.
96
A
Troubleshooting and other information
Error and maintenance messages
A
The most common error and maintenance messages are shown below.
If you need more help, the Brother Solutions Center offers the latest FAQs and troubleshooting
tips:
Visit us at http://support.brother.com.
Error Message
Cause
Action
Cartridge Error
Put the Toner
Cartridge back
in.
The toner cartridge is not
installed correctly.
Put the toner cartridge firmly into the drum unit,
and then put is back in the machine.
Verify you are using a Brother
toner cartridge.
Use only a Brother Original drum unit and
Brother Original toner cartridge.
Comm.Error
Poor telephone line quality
Try sending the fax again.
caused a communication error.
Disconnected
The other person or other
person’s fax machine stopped
the call.
Try to send or receive again.
Document Jam
Pull the jammed paper out of the ADF unit.
(For ADF models)
The document was not
inserted or fed correctly, or the
document scanned from the
ADF was too long.
Out of Memory
The machine’s memory is full.
Fax sending or copy operation in process
Do one of the following:
 Press Start to send or copy the scanned
pages.
 Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
A
Print operation in process
 Press Stop/Exit. The machine will cancel
the print job and clear it from the memory.
 Lower the print quality.
(For more information, see Software and
Network User’s Guide.)
97
Error Message
Cause
Action
Self-Diagnostic
The temperature of the fuser
unit does not rise to a specified
temperature within the
specified time.
Turn the machine off, wait a few seconds, and
then turn it on again. Leave the machine idle for
15 minutes with the power on.
The fuser unit is too hot.
Size mismatch
The paper in the tray is not the
correct size.
Load the correct size of paper in the tray and
set the size of paper to the tray.
Toner Low
If the LCD shows Toner Low
you can still print; however, the
machine is telling you that the
toner cartridge is near the end
of its life.
Order a new Brother toner cartridge now so a
replacement toner cartridge will be available
when the LCD shows Replace Toner or
Toner Ended.
NOTE
Turning off the machine will erase the fax data in the memory. To prevent you from losing any
important messages, see Transferring your faxes or Fax Journal report (MFC models)
on page 109.
98
Troubleshooting and other information
If you are having difficulty with your machine
A
Most problems can be easily resolved by yourself. If you need additional help, the Brother
Solutions Center offers the latest FAQs and troubleshooting tips.
Visit us at http://support.brother.com.
Telephone and Fax problems (MFC models)
A
If you cannot send or receive a fax, check the following:
3
2
1 Check the machine's power cord is connected correctly and the machine is turned on.
2 Connect one end of the telephone line cord to the area labelled "LINE," and then connect the
other end of the telephone line cord directly to a telephone wall Jack.
A
If you can send and receive faxes when the telephone line is directly connected to the fax, the
problem may be unrelated to the machine. Please contact your service provider for connection
issues.
3 Check the receive mode.
For more information on setting the Receive mode, see Receive modes on page 71.
99
4 Change the compatibility setting to Basic(for VoIP).
You may be able to send and receive faxes by lowering the connection speed.
a
b
c
d
Press Menu, 2, 0, 1.
Press a or b to choose Basic(for VoIP).
Press OK.
Press Stop/Exit.
NOTE
Brother does not recommend the use of a VoIP line. VoIP limitations in general can cause
some functions of the fax machine not to work correctly.
If, after trying all of the above the problem is still not resolved, turn the machine off, and then turn
it on.
If you still cannot send or receive faxes after trying all of the above, check the FAQ on the
Brother Solutions Center website (http://support.brother.com).
Troubleshooting for other problems
Question
Answer
Cannot receive a fax.
If you have a dedicated fax line and want your Brother machine to automatically
answer all incoming faxes, you should choose Fax Only.
Can I set the machine not to print
the Transmission Verification
report?
This product will print a Transmission Verification repor
Can I cancel the fax job?
Press Stop/Exit to cancel the fax or Menu 2, 6 (for India and Vietnam), Menu 2,
7 (for Other countries) to cancel the remaining jobs.
Poor sending quality.
Try changing your resolution to Fine or S.Fine, or clean the scanner.
Sent faxes are blank.
Make sure you are loading the document correctly. The document should be face
down when using the ADF or the scanner glass. See Loading documents
on page 67.
Vertical black lines when sending.
Black vertical lines on faxes you send are typically caused by dirt or correction
fluid on the glass strip. See Clean the inside of the machine. on page 102.
Even if the Transmission Verification report is set to Off, a report is printed when
there is a communication error.
If the Journal Period is set to Off, Fax Journal are not printed.
100
Troubleshooting and other information
Improving the print quality
A
NOTE
Brother does not recommend the use of cartridges other than Brother Original cartridges or the
refilling of used cartridges with toner from other sources.
If you are having problems with print results, check the following:
1 The machine's environment.
Choose a location where the temperature remains between 10 °C and 32 °C and the humidity
is between 20% to 80% (without condensation).
5
6
2
3
4
2 Acceptable paper is loaded in the paper tray.
See Acceptable paper on page 66.
3 The paper is loaded correctly in the machine.
Turning the paper over may help paper loading
become smoother.
A
Adjusting the guide may help paper loading
become smoother.
101
4 Replace a toner cartridge or a drum unit.
For more information on how to replace the consumable items, see the instructions included
with the drum unit for replacing the drum unit or see the instructions printed on the box of the
toner cartridge for replacing the toner cartridge.
5 Clean the inside of the machine.
 Cleaning the scanner glass
Clean the white plastic surface (1) and scanner glass (2).
(1)
(2)
(For ADF models)
Clean the white bar (3) and the scanner glass strip (4).
(3)
(4)
102
Troubleshooting and other information
 Cleaning the corona wire
Slide the green tab from left to right and right to left several times.
(5)
NOTE
Be sure to return the tab to the home position (a) (5). If you do not, printed pages may have a
vertical stripe.
 Clean the drum unit if black or white dots appear on printed pages
Push down the lock lever and take the toner cartridge out of the drum unit.
A
103
Turn the drum unit gear by hand while looking at the surface of the drum roller (1).
(1)
Wipe the surface of the drum gently with a dry cotton swab until the dust or glue on the
surface comes off.
104
Troubleshooting and other information
6 Check the printer driver settings.
Try changing the Print Settings in the Basic tab.
If the paper is curled or the toner is not fixed well on the paper, you can adjust these settings
in Improve Print Output. Click Other Print Options in the Advanced tab.
A
105
Document Jams (ADF
models)
f
A
Insert a piece of stiff paper, such as
cardstock, into the ADF to push any
small paper scraps through.
Follow the steps below to handle a document
jam in the ADF.
a
b
Open the ADF cover.
Pull the jammed document out.
If the document rips or tears, be sure
you remove all small paper scraps to
prevent future jams.
c
d
e
106
Close the ADF cover.
Lift the document cover.
Pull the jammed document out to the
right.
g
h
Close the document cover.
Press Stop/Exit.
Troubleshooting and other information
Paper Jams
Always remove all paper from the paper tray
and straighten the stack when you add new
paper. This helps prevent multiple sheets of
paper from feeding through the machine at
one time and prevents paper jams.
a
b
Turn the machine off.
c
d
Remove all paper loaded in the tray.
e
A
Open the scanner cover. The pull-arm
(1) on the left side of the machine will
lock.
Open the top cover.
(1)
Wait at least 15 minutes for the product
to cool down before you touch the
internal parts of the product.
Use both hands to slowly pull out the
jammed paper.
f
Slowly take out the drum unit and toner
cartridge assembly.
A
107
WARNING
HOT SURFACE
i
Place the drum unit and toner cartridge
assembly back in to the machine.
j
Close the top cover.
After pulling the pull-arm (1) on the left
side of the machine down, close the
scanner cover using both hands.
(1)
g
h
108
Push down the lock lever and take the
toner cartridge out of the drum unit.
Remove the jammed paper if there is
any inside the drum unit.
Put the toner cartridge back into the
drum unit until the lock lever lifts
automatically.
k
Load the paper back in to the tray.
Make sure that the paper is below the
protruding section of the rear guide.
Slide the paper guides to fit the paper
size. Make sure that the guides are
firmly in the slots.
l
Turn the machine on.
Troubleshooting and other information
Transferring your
faxes or Fax Journal
report (MFC models)
Transferring faxes to your PC
You can transfer the faxes from your
machine’s memory to your PC.
A
a
If the LCD shows:
 Print Unable XX
 Scan Unable XX
Click
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring the Fax Journal
report to another fax machine on page 110.)
If there is an error message on the
machine’s LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
Press Menu, 9, 0, 1.
Click
A
b
Make sure that you have set PC Fax
Receive on the machine. (See PC-FAX
Receive (For Windows® only)
on page 77.) If faxes are in the
machine’s memory when you set up PCFax Receive, the LCD will ask if you
want to transfer the faxes to your PC.
c
Do one of the following:
 If the LCD shows No Data, there are
no faxes left in the machine’s
memory. Press Stop/Exit.
c
 To transfer all faxes to your PC,
press 1. You will be asked if you want
a backup print.
Press Start.
NOTE
If you have not set up your Station ID, you
cannot enter fax transfer mode. Press
Menu, 0, 2 to register your fax number,
telephone number and name.
(Brother Utilities), and
then click the drop-down list and select
your model name (if not already
selected). Click PC-FAX Receive in the
left navigation bar and then click
Receive.
Do one of the following:
 Enter the fax number to which faxes
will be forwarded.
(Start) > All Programs >
Brother > Brother Utilities, and then
click the drop-down list and select your
model name (if not already selected).
Click PC-FAX Receive in the left
navigation bar, and then click Receive.
(Windows® 8)
NOTE
a
b
Make sure that you have installed MFLPro Suite and then turn on PC-FAX
Receive on the PC. (See Software and
Network User’s Guide)
Do one of the following:
(Windows® XP, Windows Vista® and
Windows® 7)
We recommend transferring your faxes to
another fax machine or to your PC. (See
Transferring faxes to another fax machine
on page 109 or Transferring faxes to your PC
on page 109.)
Transferring faxes to another
fax machine
A
 To exit and leave the faxes in the
memory, press 2.
d
Press a or b to choose On or Off.
Press OK.
109
A
e
Press Stop/Exit.
Transferring the Fax Journal
report to another fax machine
A
a
b
Press Menu, 9, 0, 2.
c
Press Start.
Enter the fax number to which the Fax
Journal report will be forwarded.
NOTE
If you have not set up your Station ID, you
cannot enter fax transfer mode. Press
Menu, 0, 2 to register your fax number,
telephone number and name.
Cleaning and Checking
the machine
Make sure to read the guidelines in the
Product Safety Guide before cleaning the
machine.
Clean the outside and inside of the machine
regularly with a dry, lint-free cloth. When you
replace the toner cartridge or the drum unit,
make sure that you clean the inside of the
machine. If printed pages are stained with
toner, clean the inside of the machine with a
dry, lint-free cloth.
WARNING
DO NOT use flammable substances, any
type of spray, or an organic solvent/liquid
containing alcohol or ammonia to clean the
inside or outside of the product. Doing so
could cause a fire or electrical shock.
Instead, use only a dry, lint-free cloth.
(For more information, see Product Safety
Guide.)
110
A
B
Specifications
B
DCP-1600, DCP-1601, MFC-1900, MFC-1901 and
MFC-1905
General
B
Model
DCP-1600
DCP-1601
Printer Type
Laser
Print Method
Electrophotographic Laser Printer
Memory Capacity
16 MB
Power Source
220 - 240 V AC 50/60 Hz
Power Consumption
(Average)
B
MFC-1900
MFC-1901
Peak 1
Approx. 1,080 W
Printing 1
Approx. 380 W at 25 °C
Copying 1
Approx. 380 W at 25 °C
Ready 1
Approx. 40 W at 25 °C
Deep
Approx. 0.8 W
Sleep
MFC-1905
Approx. 1.3 W
1
Power
Approx. 0.28 W
Off 1 2 3
B
111
Model
DCP-1600
DCP-1601
MFC-1900
MFC-1901
Dimensions
DCP-1600 and DCP-1601
MFC-1905
255 mm
340 mm
385 mm
MFC-1900 and MFC-1901
283 mm
340 mm
385 mm
MFC-1905
283 mm
340 mm
456 mm
Weights (with consumables)
7.2 kg
Noise
Level
Temperature
Sound
Pressure
Printing
LPAm = 52 dB (A)
Sound
Power
Printing
LWAd = 6.59 B (A)
Operating 10 to 32 °C
Storage
Humidity
0 to 40 °C
Operating 20 to 80% (without condensation)
Storage
112
8.2 kg
35 to 85% (without condensation)
8.5 kg
Specifications
Model
Interface
DCP-1600
DCP-1601
USB
MFC-1900
MFC-1901
MFC-1905
Hi-Speed USB 2.0 4 5
It is recommended you use a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Support
OS
Windows®
Windows® XP Home, Windows® XP Professional,
Windows® XP Professional x64 Edition, Windows Vista®,
Windows® 7, Windows® 8, Windows ® 8.1, Windows Server® 2003,
Windows Server® 2003 x64 Edition, Windows Server® 2008,
Windows Server® 2008 R2, Windows Server® 2012,
Windows Server® 2012 R2
Consumable
Mac OS
OS X v10.7.5, 10.8.x, 10.9.x
Toner Cartridge
(Inbox)
(For India and Vietnam)
Approx. 1,500 pages A4 or Letter page 6
(For other countries)
Approx. 1,000 pages A4 or Letter page 6
Toner Cartridge
(Standard)
(For India and Vietnam)
Approx. 1,500 pages A4 or Letter page 6
(For other countries)
Approx. 1,000 pages A4 or Letter page 6
Model
Name
(For Vietnam) TN-1010
(For India) TN-1020
(For Indonesia) TN-1080
(For other countries) TN-1000
Drum Unit
Approx. 10,000 pages A4 or Letter pages (1 page / job) 7
Model
Name
(For Vietnam) DR-1010
(For India) DR-1020
B
(For Indonesia) DR-1080
(For other countries) DR-1000
1
Measured when the machine is connected to the USB interface.
2
Power consumption varies slightly depending on the usage environment or part wear.
3
Measured according to IEC 62301 Edition 2.0.
4
Your machine has a Hi-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB
1.1 interface.
5
Third-party USB ports are not supported.
6
Approx. cartridge yield is declared in accordance with ISO/IEC 19752.
7
Drum life is approximate and may vary by type of use.
113
Document Size
B
Model
DCP-1600
DCP-1601
MFC-1900
MFC-1901
ADF(automatic document
feeder)
—
Up to 10 pages
Scanner Glass
One sheet per time
Document
Size
ADF
—
Scanner
Glass
Length: Up to 300.0 mm
Weight
ADF
ADF
—
Scanner
Glass
Up to 2.0 kg
MFC-1905
A4, Letter, Legal, Folio
Width: Up to 215.9 mm
65 to 90 g/m2
Print media
Model
Paper
Input
B
DCP-1600
DCP-1601
Paper
Tray
MFC-1900
MFC-1901
MFC-1905
Paper
Type
Plain Paper, Recycled Paper
Paper
Size
A4, Letter, Legal, Folio, A5, A5(Long Edge), B5, Executive
Width: 148 to 216 mm
Length: 148 to 355.6 mm
Paper
Weight
65 to 105 g/m2
Maximum
Paper
Capacity
Up to 150 sheets of 80 g/m2 Plain paper
Paper Face-Down
Output Output Tray
114
Up to 50 sheets of 80 g/m2 Plain Paper
(face-down delivery to the face-down output paper tray)
Specifications
Fax
Model
DCP-1600
DCP-1601
MFC-1900
MFC-1901
Modem Speed
—
14,400 bps (with Automatic Fallback)
Scanning Width
—
Max. 208 mm
Printing Width
—
Max. 208 mm
Greyscale
—
8 bit/256 levels
Horizontal
—
8 dot/mm
Vertical
—
Standard: 3.85 line/mm
—
Fine: 7.7 line/mm
—
Photo: 7.7 line/mm
Resolution
1
B
MFC-1905
—
Superfine: 15.4 line/mm
Speed Dial
—
99 stations
Automatic Redial
—
3 times at 5 minute intervals
Memory Transmission
—
Up to 400 1 pages
Out of Paper Reception
—
Up to 400 1 pages
‘Pages’ refers to the ‘ITU-T Test Chart #1’ (a typical business letter, Standard resolution, MMR code). Specifications
and printed materials are subject to change without prior notice.
Copy
1
B
Model
DCP-1600
DCP-1601
MFC-1900
MFC-1901
Copy Width
Max. 210 mm
Multiple Copies
Stacks or Sorts up to 99 pages
Reduce/Enlarge
25% to 400% (in increments of 1%)
Resolution
Up to 600 × 600 dpi
First Copy Out Time 1
Less than 16 seconds at 23 °C / 230 V
MFC-1905
B
From Ready mode and standard tray
115
Scanner
B
Model
DCP-1600
DCP-1601
MFC-1900
MFC-1901
MFC-1905
Colour
Yes
TWAIN Compliant
Yes (Windows® XP/ Windows Vista® / Windows® 7 / Windows® 8 /
Windows® 8.1 / OS X v10.7.5, 10.8.x, 10.9.x 1)
WIA Compliant
Yes (Windows® XP / Windows Vista ® / Windows® 7 / Windows® 8 /
Windows® 8.1)
ICA Compliant
Yes (OS X v10.7.5, 10.8.x, 10.9.x )
Colour
Depth
Colour
24 bit colour processing (Input)
Greyscale
8 bit colour processing (Input)
24 bit colour processing (Output)
8 bit colour processing (Output)
Resolution
Up to 19,200 × 19,200 dpi (interpolated) 2
Up to 600 × 1200 dpi (optical) 2 (from Scanner Glass)
—
Scanning Width
Up to 600 × 600 dpi (optical) 2 (from ADF)
Max. 210 mm
1
For the latest driver updates for the version of OS X you are using, visit us at http://support.brother.com.
2
Maximum 1200 × 1200 dpi scanning with the WIA driver in Windows® XP, Windows Vista®, Windows® 7,
Windows® 8 and Windows® 8.1 (resolution up to 19200 × 19200 dpi can be chosen by using the scanner utility)
Printer
B
Model
DCP-1600
DCP-1601
MFC-1900
MFC-1901
Resolution
Up to 2400 × 600 dpi (HQ1200 technology)
Print Speed 1
Up to 20 pages/minute (A4 size)
Up to 21 pages/minute (LTR size)
First Print Out Time
2
Less than 10 seconds at 23 °C / 230 V
1
The print speed may vary depending on the type of document you print.
2
From Ready mode and standard tray
116
MFC-1905
Specifications
DCP-1610W, DCP-1615NW, DCP-1616NW,
MFC-1910W, MFC-1911NW and MFC-1916NW
B
General
B
Model
DCP-1610W
Printer Type
Laser
Print Method
Electrophotographic Laser Printer
Memory Capacity
32 MB
Power Source
Power Consumption
(Average)
DCP-1615NW
DCP-1616NW
MFC-1910W
MFC-1911NW
MFC-1916NW
220 - 240 V AC 50/60 Hz
Peak
1
Approx. 1,080 W
Printing 1
Approx. 390 W at 25 °C
Copying 1
Approx. 390 W at 25 °C
Ready 1
Approx. 50 W at 25 °C
Deep
Approx. 0.9 W Approx. 1.0 W Approx. 1.4 W Approx. 1.5 W
Sleep 1
Power
Approx. 0.28 W
Approx. 0.3 W
Off 1 2 3
B
117
Model
DCP-1610W
Dimensions
DCP-1610W
DCP-1615NW
DCP-1616NW
MFC-1910W
MFC-1911NW
MFC-1916NW
255 mm
340 mm
385 mm
DCP-1615NW, DCP-1616NW, MFC-1910W and MFC-1911NW
283 mm
340 mm
385 mm
MFC-1916NW
283 mm
340 mm
456 mm
Weights (with consumables)
118
7.2 kg
8.2 kg
8.5 kg
Specifications
Model
Noise
Level
DCP-1610W
Sound
Pressure
Printing
LPAm = 52 dB (A)
Sound
Power
Printing
LWAd = 6.6 B (A)
Temperature
Humidity
MFC-1910W
MFC-1911NW
MFC-1916NW
Operating 10 to 32 °C
Storage
0 to 40 °C
Operating 20 to 80% (without condensation)
Storage
Interface
DCP-1615NW
DCP-1616NW
USB
35 to 85% (without condensation)
Hi-Speed USB 2.0 4 5
It is recommended you use a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Ethernet
—
10BASE-T/
—
100BASE-TX 6
Support
OS
10BASE-T/
100BASE-TX 6
Wireless LAN 7
IEEE 802.11b/g/n (Infrastructure Mode/Ad-hoc Mode)
Windows®
Windows® XP Home, Windows® XP Professional,
Windows® XP Professional x64 Edition, Windows Vista®,
Windows® 7, Windows® 8, Windows® 8.1, Windows Server® 2003,
Windows Server® 2003 x64 Edition, Windows Server® 2008,
Windows Server® 2008 R2, Windows Server® 2012,
Windows Server® 2012 R2
Mac OS
OS X v10.7.5, 10.8.x, 10.9.x
B
119
Model
DCP-1610W
DCP-1615NW
DCP-1616NW
Consumable Toner Cartridge
(Inbox)
(For Oceanian countries)
MFC-1910W
MFC-1911NW
MFC-1916NW
Approx. 700 pages A4 or Letter page 8
(For India and Vietnam)
Approx. 1,500 pages A4 or Letter page 8
(For other countries)
Approx. 1,000 pages A4 or Letter page 8
Toner Cartridge
(Standard)
(For India and Vietnam)
Approx. 1,500 pages A4 or Letter page 8
(For other countries)
Approx. 1,000 pages A4 or Letter page 8
Model
Name
(For Vietnam) TN-1010
(For India) TN-1020
(For Oceanian countries) TN-1070
(For Indonesia) TN-1080
(For other countries) TN-1000
Drum Unit
Approx. 10,000 pages A4 or Letter pages (1 page / job) 9
Model
Name
(For Vietnam) DR-1010
(For India) DR-1020
(For Oceanian countries) DR-1070
(For Indonesia) DR-1080
(For other countries) DR-1000
1
Measured when the machine is connected to the USB interface.
2
Power consumption varies slightly depending on the usage environment or part wear.
3
Measured according to IEC 62301 Edition 2.0.
4
Your machine has a Hi-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB
1.1 interface.
5
Third-party USB ports are not supported.
6
Use a straight-through Category 5 (or greater) twisted-pair cable.
7
For detailed network specifications, see Network (LAN) on page 124 and Software and Network User’s Guide.
8
Approx. cartridge yield is declared in accordance with ISO/IEC 19752.
9
Drum life is approximate and may vary by type of use.
120
Specifications
Document Size
B
Model
DCP-1610W
DCP-1615NW
DCP-1616NW
MFC-1910W
ADF(automatic document
feeder)
—
Up to 10 pages
Scanner Glass
One sheet per time
Document
Size
ADF
—
Scanner
Glass
Length: Up to 300.0 mm
Weight
ADF
ADF
—
Scanner
Glass
Up to 2.0 kg
MFC-1911NW MFC-1916NW
A4, Letter, Legal, Folio
Width: Up to 215.9 mm
65 to 90 g/m2
Print media
Model
Paper
Input
B
DCP-1610W
Paper
Tray
DCP-1615NW
DCP-1616NW
MFC-1910W
MFC-1911NW MFC-1916NW
Paper
Type
Plain Paper, Recycled Paper
Paper
Size
A4, Letter, Legal, Folio, A5, A5(Long Edge), B5, Executive
Width: 148 to 216 mm
Length: 148 to 355.6 mm
Paper
Weight
65 to 105 g/m2
Maximum
Paper
Capacity
Up to 150 sheets of 80 g/m 2 Plain paper
Paper Face-Down
Output Output Tray
B
Up to 50 sheets of 80 g/m 2 Plain Paper
(face-down delivery to the face-down output paper tray)
121
Fax
Model
DCP-1610W
Modem Speed
—
14,400 bps (with Automatic Fallback)
Scanning Width
—
Max. 208 mm
Printing Width
—
Max. 208 mm
Greyscale
—
8 bit/256 levels
Horizontal
—
8 dot/mm
Vertical
—
Standard: 3.85 line/mm
—
Fine: 7.7 line/mm
—
Photo: 7.7 line/mm
Resolution
1
B
DCP-1615NW
DCP-1616NW
MFC-1910W
MFC-1911NW
—
Superfine: 15.4 line/mm
Speed Dial
—
99 stations
Automatic Redial
—
3 times at 5 minute intervals
Memory Transmission
—
Up to 400 1 pages
Out of Paper Reception
—
Up to 400 1 pages
MFC-1916NW
‘Pages’ refers to the ‘ITU-T Test Chart #1’ (a typical business letter, Standard resolution, MMR code). Specifications
and printed materials are subject to change without prior notice.
Copy
1
B
Model
DCP-1610W
Copy Width
Max. 210 mm
Multiple Copies
Stacks or Sorts up to 99 pages
Reduce/Enlarge
25% to 400% (in increments of 1%)
Resolution
Up to 600 × 600 dpi
First Copy Out Time 1
Less than 16 seconds at 23 °C / 230 V
From Ready mode and standard tray
122
DCP-1615NW
DCP-1616NW
MFC-1910W
MFC-1911NW
MFC-1916NW
Specifications
Scanner
B
Model
DCP-1610W
DCP-1615NW
DCP-1616NW
MFC-1910W
MFC-1911NW MFC-1916NW
Colour
Yes
TWAIN Compliant
Yes (Windows ® XP/ Windows Vista® / Windows ® 7 / Windows® 8 /
Windows® 8.1 / OS X v10.7.5, 10.8.x, 10.9.x 1)
WIA Compliant
Yes (Windows ® XP / Windows Vista® / Windows® 7 / Windows® 8 /
Windows® 8.1)
ICA Compliant
Yes (OS X v10.7.5, 10.8.x, 10.9.x )
Colour
Depth
Colour
24 bit colour processing (Input)
Greyscale
8 bit colour processing (Input)
24 bit colour processing (Output)
8 bit colour processing (Output)
Resolution
Up to 19,200 × 19,200 dpi (interpolated) 2
Up to 600 × 1200 dpi (optical) 2 (from Scanner Glass)
—
Scanning Width
Up to 600 × 600 dpi (optical) 2 (from ADF)
Max. 210 mm
1
For the latest driver updates for the version of OS X you are using, visit us at http://support.brother.com.
2
Maximum 1200 × 1200 dpi scanning with the WIA driver in Windows® XP, Windows Vista®, Windows® 7,
Windows® 8 and Windows® 8.1 (resolution up to 19200 × 19200 dpi can be chosen by using the scanner utility)
Printer
B
Model
DCP-1610W
DCP-1615NW
DCP-1616NW
MFC-1910W
Resolution
Up to 2400 × 600 dpi (HQ1200 technology)
Print Speed 1
Up to 20 pages/minute (A4 size)
MFC-1911NW MFC-1916NW
B
Up to 21 pages/minute (LTR size)
First Print Out Time
2
Less than 10 seconds at 23 °C / 230 V
1
The print speed may vary depending on the type of document you print.
2
From Ready mode and standard tray
123
Network (LAN)
B
NOTE
For more information about the Network specifications, see Software and Network User’s
Guide.
Model
DCP-1610W
DCP-1615NW
DCP-1616NW
MFC-1910W
MFC-1911NW
MFC-1916NW
LAN
You can connect your machine to a network for Network Printing, Network
Scanning, PC-Fax Send 1, PC-Fax Receive (Windows ® only) 1 and Remote
Setup 1 2.
Also included is Brother BRAdmin Light 3 4 Network Management software.
Protocols
Security
Protocols
IPv4
ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name
resolution, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw
Port/Port 9100, IPP, FTP Server, SNMPv1/v2c, HTTP Server, TFTP Client and
Server, SMTP Client, ICMP, Web Services (Print/Scan)
IPv6
NDP, RA, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw
Port/ Port 9100, IPP, FTP Server, SNMPv1/v2c, HTTP Server, TFTP Client
and Server, SMTP Client, ICMPv6, Web Services (Print/Scan)
Wired
—
Wireless
SMTP-AUTH
Wireless Network
Security
Wireless
Network
Setup
Support
Utility
SMTP-AUTH
—
SMTP-AUTH
WEP 64/128, WPA-PSK (TKIP/AES), WPA2-PSK (AES)
AOSS™
Yes
WPS
Yes
1
For MFC models
2
See Software and Network User’s Guide.
3
(For Windows® users) Brother BRAdmin Light is available from the CD-ROM provided with the machine.
(For Macintosh users) Brother BRAdmin Light is available as a download from http://support.brother.com.
4
(For Windows® users) If you require more advanced printer management, use the latest Brother BRAdmin
Professional utility version that is available as a download from http://support.brother.com.
124
C
Index
A
D
Address Book ............................................. 7
ADF (automatic document feeder)
using .....................................................67
Answering machine (TAD)
connecting ............................................82
Apple Macintosh
See Software and Network User’s Guide.
Auto Power Off .........................................63
Automatic
fax receive
Fax Detect .........................................72
Deep Sleep mode .................................... 63
Dialling
manual ................................................. 75
Speed Dial ............................................ 75
using the Search key ............................ 75
Dimensions .................................... 112, 118
Document
how to load ........................................... 67
jam ..................................................... 106
Drum unit ................................................. 94
cleaning .............................................. 103
B
E
Broadcasting ............................................70
cancelling ..............................................70
Brother Numbers ......................................... i
Error messages on LCD .......................... 97
External telephone, connecting ............... 83
C
Cancelling
broadcast in process .............................70
Cleaning
corona wire .........................................103
drum unit .............................................103
scanner ...............................................102
Connecting
external TAD (answering machine) .......81
external telephone ................................83
Consumable items ...................................94
Control panel overview .............................. 6
ControlCenter2 (for Macintosh)
See Software and Network User’s Guide.
Copy
2 in 1 (ID) Copy .......................................6
2 in 1 (ID) Copy/Copy Options key ......... 8
Copy Options key ................................... 8
Options key ............................................. 6
Cordless telephone (non-Brother) ............83
F
FAX (PC-FAX)
Macintosh
See Software and Network User’s Guide.
Windows®
receiving ............................................ 77
sending .............................................. 79
Fax, stand-alone
receiving
Continue Mode .................................. 64
easy receive ...................................... 72
ring delay, setting .............................. 72
sending ................................................. 69
broadcasting ...................................... 70
Fax/Tel mode
F/T ring time (double-ring) .................... 72
fax detect .............................................. 72
receiving faxes ..................................... 83
ring delay .............................................. 72
125
C
H
O
Help
LCD messages for DCP models ...........46
LCD messages for MFC models .............9
Menu Table for DCP models .................47
Menu Table for MFC models ................10
Hook key ..................................................83
Options key ............................................... 6
P
LCD (liquid crystal display) ........ 6, 8, 9, 46
Paper ....................................................... 66
jam ...................................................... 107
size ....................................................... 65
tray capacity ......................................... 66
PC-Fax .................................................... 77
See Software User’s Guide.
Print
quality ................................................. 101
resolution .................................... 116, 123
specifications .............................. 116, 123
Printing
See Software and Network User’s Guide.
Programming your machine ................ 9, 46
M
Q
Macintosh
See Software and Network User’s Guide.
Maintenance, routine .............................110
Manual
dialling ...................................................75
Menu Table
DCP models ..........................................47
MFC models ..........................................10
Mode, entering
fax .........................................................69
Multi-line connections (PABX) .................82
Quality
printing ................................................ 101
Quick dial
broadcasting ......................................... 70
Speed Dial
changing ............................................ 74
setting up ........................................... 74
using .................................................. 75
J
Jacks
EXT
external telephone .............................83
TAD (answering machine) .................81
L
N
Network
faxing
See Software and Network User’s Guide.
printing
See Software and Network User’s Guide.
sccnning
See Software and Network User’s Guide.
Network connectivity ..................... 113, 119
126
R
Register your product ..................................i
Remote setup
See Software and Network User’s Guide.
Resolution
copy ............................................ 115, 122
fax ............................................... 115, 122
print ............................................ 116, 123
scan ............................................ 116, 123
Ring delay, setting ................................... 72
S
W
Scan a document to a computer ..............89
Scanner glass
using .....................................................67
Scanning ..................................................89
See Software and Network User’s Guide.
Specifications .........................................111
copy ........................................... 115, 122
document size ............................ 114, 121
fax .............................................. 115, 122
general ....................................... 111, 117
print ............................................ 116, 123
print media ................................. 114, 121
scan ........................................... 116, 123
Speed Dial
changing ...............................................74
setting up ..............................................74
using .....................................................75
Weights ......................................... 112, 118
WiFi key ................................................. 7, 8
Windows®
See Software and Network User’s Guide.
Wireless ......................................... 113, 119
Wireless Network
See Software and Network User’s Guide.
T
TAD (telephone answering device), external
connecting ..................................... 81, 82
recording OGM .....................................82
Telephone line
connections ...........................................82
multi-line (PABX) ..................................82
Text, entering ...........................................61
Toner Setting (Continue Mode) ................63
Troubleshooting .......................................99
document jam .....................................106
error and maintenance messages
on LCD ..................................................97
paper jam ............................................107
print quality .........................................101
Telephone and Fax ...............................99
other problems .................................100
C
U
Utilities ........................................................ i
127
For Australia Only:
Support – For technical support of your Brother Product other than what you can resolve through
the User’s Guide, please visit our website or Solutions website (see below) to find an answer to
FAQs/Troubleshooting, locating Drivers & Software.
Alternatively, please contact the Product Support Centre for any customer care/technical support
enquiry.
To contact Brother International (Aust) Pty Ltd for support on a Brother product please see
the details listed below:
Product Support Centre: Australia
Brother International (Aust) Pty Ltd
Phone:
02 8875 6000
Fax:
02 9870 7223
Solutions Site:
http://support.brother.com
website:
www.brother.com.au
Email:
To submit an e-mail enquiry, visit www.brother.com.au go to
Service and Support area and follow the prompts.
Our Technical Support Consultants are available 5 days a week by phone during the hours of
8.30am to 5.00pm (EST/EDST) Monday to Friday.
For New Zealand Only:
For technical support for your Brother Product please refer to this user guide and the FAQ’s
available on our Brother Solutions website, http://support.brother.com.
Drivers, software, user guides and technical references are all available on our Brother Solutions
website.
If you require further assistance please contact Brother International (NZ) Limited on the following
numbers
Initial setup and 14 day product support
0800 454 677
Technical Support for those using Genuine Brother Consumables
0800 329 111
Technical Support for those not using Genuine Consumables
0900 552 152
24 / 7 Automated Self Help
0800 652 152
Brother Recycle Assistance
0800 632 467
Fax Assistance
0800 837 822
Our Technical Support Consultants are available 7 days a week by phone during the hours of
8.30am to 5pm Monday to Friday and 9am to 5pm Saturday and Sunday.
Email Assistance
Please visit www.brother.co.nz and submit a helpdesk enquiry from our Service and Support
page.
Web Assistance
Please visit www.brother.co.nz under Service and Support for Frequently Asked Questions, Driver
downloads, Warranty information and Service Centres.
Visit us on the World Wide Web
http://www.brother.com
These machines are approved for use in the country of purchase only. Local Brother companies
or their dealers will only support machines purchased in their own countries.
www.brotherearth.com