Creative | ZIISOUND T6 - | Untitled - Creative

1
T6_CLE_EN_online.indd 1
12/10/10 2:38:34 PM
English
Safety instructions
Technical Specifications
Please read the following before using Creative products:
•
•
•
•
· To be completely disconnected from the power input, the mains plug has to be disconnected/
detached from the mains.
· Disconnect the mains plug when the device is expected to be unused for several days.
· Remove the batteries when not in use for an extended period of time.
Input Rating: 100 - 240V ~ 50/60Hz 400mA
Bluetooth Version : Bluetooth 2.1 + EDR (Enhanced Data Rate)
Operating Frequency: 2402 - 2480 MHz
Supported Bluetooth profiles* : A2DP (Wireless Stereo Bluetooth),
AVRCP (Bluetooth Remote Control)
• Operating Range: Up to 10 meters (Measured in open space. Walls and structures may affect
range of device.)
Additional guidelines for Bluetooth devices
· The short wave radio frequency signals of a Bluetooth device may impair the operation of other
electronic and medical devices
· Switch off the device where it is prohibited. Do not use the device in medical facilities, aircraft,
refueling points, close to automatic doors, automatic fire alarms or other automatically
controlled devices
· Keep this device at least 20 cm from pacemakers and other medical devices. Radio waves may
impair the operation of pacemakers and other medical devices
Safety information for battery
· The battery must be recycled or disposed of properly. Contact local agencies for recycling and
disposal information.
· Do not allow metal objects to touch the terminal of the battery.
· If there is leakage, an offensive odor, discoloration or deformation during charging or use, remove
the battery and do not use it again.
· Clean your hands well before touching food or sensitive areas, such as, your eyes.
· Do not expose to excessive heat such as sunshine, fire or the like.
· The following statement only applicable to products containing “CR” type lithium coin cells:
Compatibility Disclaimer
Wireless performance is dependent on your device’s Bluetooth wireless technology. Refer to your
device manufacturer’s manual.
Creative will not be liable for any loss of data or leakage resulting from the use of these devices.
Notes
* Refer to your Bluetooth device (notebook1, PC1, mobile device2) manufacturer’s documentation/
website for supported profiles.
1
Compatible with PC (Windows XP/Vista/7), Apple Macintosh equipped with Bluetooth wireless stereo
2
Compatible with most major brands of Bluetooth A2DP enabled mobile phones and A2DP enabled
mobile phones (including iPhone, Windows Mobile)
Perchlorate material special handling may apply
see www.dtsc.ca.gov/hazardouswaste/perchlorate
CAUTION: Risk of explosion if battery is replaced by incorrect types.
2
T6_CLE_EN_online.indd 2-3
3
12/10/10 2:38:35 PM
1
Product Overview / Connectivity Diagram
4
Side views of the Audio Control Pod:
4
13
2
5
3
1
7
8
9
10
[
11
6
12
*
Audio Control Pod LED status
indications:
2
1
2
3
4
AC IN
Right Satellite Speaker
Left Satellite Speaker
Audio In - To analog audio in
4
T6_CLE_EN_online.indd 4-5
3
GREEN – Line-In/ AUX In
AMBER – USB Audio
BLUE – Bluetooth Connection
5 USB – USB Audio
6 Audio Control Pod
7 Bass Level Control
8 Headphone
9 Power ON/OFF
10 Source
* optional (sold separately)
11 CONNECT Button – Bluetooth Pair and Connection
12 AUX In – Auxiliary line-in for Audio Devices
13 SLAM™ Subwoofer
* optional (sold separately)
5
12/10/10 2:38:36 PM
2
Remote Control overview
3
Enjoy high performance wireless audio from ZiiSound T6 via
Bluetooth® Audio Transmitter BT-D1
1
1
2
3
4
5
6
7
8
9
1
4
3
2
5
6
7
9
8
Power
AUX Source
USB Audio
Bluetooth Stereo Source
Volume +
Previous Track
Play/ Pause
Volume Next Track
1: LED Status Indicator
Indicate the current status of the USB Bluetooth
Transmitter
2
2: CONNECT button
A multi function button used to perform pairing
and disconnection
A Bluetooth® Audio BT-D1 is paired with ZiiSound
T6 at factory. Simply insert the BT-D1 into your
PC to enjoy the high quality wireless audio.
B Wait for computer to install hardware
Installing
device . . .
Your new
hardware is
installed
and ready
to use.
Your hardware
is installed and
ready to use.
To replace the battery in the remote control
• Depress (A) and pull out (B)
• Replace the battery with the positive polarity facing upward and push (B) back to remote control
Note: Allow the flashing LED indicators to stop after
plugging the speaker system to the mains. This indicates
that the speaker system is initialized and ready to be
powered ON.
A
B
6
T6_CLE_EN_online.indd 6-7
C Power on the speaker and the LED status
indicator will show green.
The remote control
uses a CR2025 3V
lithium coin battery
D Press once and release the CONNECT button.
The LED will show blinking Blue then steady
Blue LED indicating ZiiSound T6 is ready to
stream music.
7
12/10/10 2:38:37 PM
4
To pair and CONNECT the ZiiSound T6 with other
Bluetooth devices
A Power on the speaker and the LED status indicator will show green.
Note: Allow the flashing LED indicators to stop after plugging the speaker system to the mains. This indicates
that the speaker system is initialized and ready to be powered ON.
5
Switching between Paired Devices
Switch between your current connected device to your previous connected devices by following
these steps:
Action
LED status
Status
Press CONNECT button for 1 second
ZiiSound T6 LED blinks and
stay lit in Blue
Ready to stream music
Press the Bluetooth icon on the remote control to switch between paired devices.
B Press and hold CONNECT button for 3 seconds while ZiiSound T6 is ON.
BLUE LED will light up and fast blink.
Note: Ensure that your next paired devices’ Bluetooth feature is ON and ready to accept connections.
Pairing
... ...
6
Reset to factory setting
Follow these steps to return to factory settings and to clear paired device memory in the ZiiSound T6:
i.
ii.
Connectivity
Bluetooth
Network
Connections
Operator
Internet
USB
i.
ii.
iii.
iv.
iii.
Connectivity
ON
Search results
ZiiSound T6
iv.
ZiiSound T6
ZiiSound T6
PASSCODE
CONNECTED
0000
Turn on the Bluetooth feature on your device
Search for ZiiSound T6
Pair and connect to ZiiSound T6. If prompted for passcode, enter 0000.
Pairing successful, ready to stream music
Action
LED status
Status
Blue LED fast blinks
Pairing mode. Ready to
accept connection from
other devices
Power OFF the speaker.
Press and hold Power button for 7
seconds.
ZiiSound T6 will auto Power up. When
the Blue LED starts to blink, ZiiSound
T6 is ready for pairing.
Note: The above are generic steps to pair a Bluetooth device, for more specific instructions on Bluetooth
connectivity for your device, please consult your manufacturer’s manual.
8
T6_CLE_EN_online.indd 8-9
9
12/10/10 2:38:38 PM
7
To establish a new connection between BT-D1 with ZiiSound T6
A Press and hold CONNECT button for 3 seconds while ZiiSound T6 is ON.
8 To reconnect the BT-D1 to a previously paired device
After the BT-D1 has been paired to device, it will always attempt to reconnect to the previously
paired device when the BT-D1 is plugged into a USB port. Always ensure that the receiving device
has its Bluetooth enabled and ready to accept connections. You may also try the following.
A) Ensure that the receiving device has its Bluetooth enabled and ready to accept connections
Pairing
... ...
B1) With the BT-D1 in the computer USB port, press the CONNECT button on the BT-D1 to initiate a
connection to your device.
B Put the BT-D1 into pairing mode for pairing
OR
B2) Plug out and plug in your BT-D1 from the computer and wait for it to auto connect
C Press and hold the CONNECT button for 3 seconds then release.
Wait for LED pattern to turn from Pairing pattern to Connected pattern.
Note: The BT-D1 will stream any audio (including startup, shutdown or warning tones) played from your
computer. Ensure that the volume is kept to a comfortable level.
Pairing
...
Connected ( 2 sec blink interval )
...
To disconnect from The BT-D1
D Ready to stream music from computer
10
T6_CLE_EN_online.indd 10-11
For Mac® OS:
a) Go to “System Preferences”, choose “Sound”
b) Choose the Output tab, select “Creative Bluetooth
Audio D1”
To stop streaming music from the BT-D1 to your receiving Bluetooth device, simply either plug out
the BT-D1 or press the CONNECT button once. Pressing once more will reconnect the BT-D1 back to
its last connected Bluetooth device.
11
12/10/10 2:38:38 PM
In Windows XP Control Panel, open Sounds and Audio Devices Properties.
9.1 Enjoy 5.1 audio via USB connection
Under the Audio tab, verify that ZiiSound T6 USB Audio is selected under Sound playback.
Under Sound playback setting, click the Advanced button to open Advanced Audio Properties.
Windows XP setup
1. Plug in the USB cable, wait for a series of “Found New Hardware” messages to appear on your
computer screen.
Note: If you do not see these messages, the capability to display them may be disabled in your computer.
Wait for 1-2 minutes before proceeding to the next step. Alternatively, you could try another USB port.
In the Speaker setup drop list, select 5.1 surround sound speakers.
Click Apply and then OK.
Your ZiiSound T6 is now ready for use.
Found New Hardware
ZiiSound T6 USB Audio
Found New Hardware
USB Composite Device
Found New Hardware
ZiiSound T6 USB Audio
Found New Hardware
USB Audio Device
Found New Hardware
ZiiSound T6 USB Audio
Found New Hardware
USB Human Interface Device
12
T6_CLE_EN_online.indd 12-13
Found New Hardware
Your new hardware is installed and
ready to use
13
12/10/10 2:38:39 PM
9.2 Windows Vista / 7 Setup
D Click on Configure and ensure that 5.1 surround is selected under Audio Channels.
A Please ensure that the correct audio source is selected by right clicking on the Volume icon on
the system tray.
B Select Playback Devices.
E Click Next for the next few configuration windows to accept defaults until setup is finished.
C Select ZiiSound T6 USB Audio and click Set default.
14
T6_CLE_EN_online.indd 14-15
15
12/10/10 2:38:39 PM
9.3 Mac OS® X audio setup
C Select 5.1 Surround, click Apply and then click Done.
A Open the Applications, Utilities then Audio MIDI Setup.
D Close all panels. Your ZiiSound T6 is now ready for use.
B Select on ZiiSound T6 USB Audio, click on Output, click on Configure Speakers
16
T6_CLE_EN_online.indd 16-17
17
12/10/10 2:38:40 PM
10 Playback with other audio devices via AUX In
11 Wall-mountable satellites
Ziisound T6 satellites can be wall-mountable, for more specific instructions on wall mounting,
please consult your wall mount adapter manufacturer’s manual.
For more information, please refer to creative.com/products/speakers/wallmount
Optional (sold separately)
18
T6_CLE_EN_online.indd 18-19
19
12/10/10 2:38:40 PM
FAQ
Perform the following trouble-shooting steps before sending it for servicing. For more information, please
refer to support.creative.com
There’s no Bluetooth link between my device and the ZiiSound T6. What should I do?
- Delete the ZiiSound T6 name entry from your Bluetooth device paired memory list and perform the steps
Section 4 (To pair and connect the ZiiSound T6 with other Bluetooth devices) to re-pair your device with
ZiiSound T6
- Position them within 1 meter or closer to each other if you experience pairing difficulties
- Ensure that both your Bluetooth device and ZiiSound T6 are not connected to any other devices
Bluetooth link is established and paired between the devices but there’s no music. What should I do?
- With some built-in Bluetooth enable computers, 3rd party USB Bluetooth dongles or other devices, you
may be required to manually specify/ setup the audio output as ZiiSound T6, e.g., (under sound and audio
devices section on your computer’s operating system) Please consult your manufacturer’s documentation
for further information.
European Compliance
DECLARATION OF CONFORMITY
According to LVD Directive (2006/95/EC) and R&TTE Directive (1999/5/EC)
Company Name
:
Company Address :
Declare under our sole responsibility that the product(s):
Speaker Product Name
Speaker Model Number
USB Transmitter Model Number
Intended Use
:
:
:
:
Restrictive use
: Nil
Radio
EMI/EMC
:
:
EMC Directive 2004/108/EC.
Communication / RF wireless products for the European market comply with R&TTE Directive 1999/5/EC.
ZiiSound T6
MF0375
MZ0440
Office and Home Usage
To which this declaration relates are in conformity with the following standard(s):
This product conforms to the following:
Mains operated products for the European market comply with Low Voltage Directive 2006/95/EC and
Commission Regulation(s) Implementing Directive (2005/32/EC).
Creative Technology Ltd
31, International Business Park
Creative Resource
Singapore 609921
Safety
:
Energy Efficiency
:
EN 300 328 V1.7.1: 2006
EN 55013: 2001 + A1: 2003 + A2: 2006
EN 55020: 2007
EN 55022: 2006 + A1:2007
EN55024:1998 + A1:2001 + A2: 2003
EN 61000-3-2:2006 + A1:2009 + A2:2009
EN 61000-3-3:2008
EN 301 489-1 V1.8.1: 2008
EN 301 489-17 V2. 1.1:2009
IEC 60065: 2001 + A1: 2005 + A2:2010 / EN 60065: 2002 + A1: 2006 + A11: 2008
EN 50371: 2002
EN 62301: 2005 + Annex II of EC No.1275/2008
Technical documentation for this product(s) is retained at the following address:
CAUTION:
To comply with the Europe CE requirement, this device must be installed with CE certified computer equipment
which meet with Class B limits.
All cables used to connect this device must be shielded, grounded and no longer than 3m in length. Operation
with non-certified computers or incorrect cables may result in interference to other devices or undesired
effects to the product.
Company Name
:
Company Address :
Creative Technology Ltd
31, International Business Park
Creative Resource
Singapore 609921
MODIFICATION:
Any changes or modifications not expressly approved by Creative Technology Limited or one of its affiliated
companies could void the user’s warranty and guarantee rights.
20
T6_CLE_EN_online.indd 20-21
21
12/10/10 2:38:41 PM
Download PDF