R&S®ZCxxx Millimeter-Wave Converters

R&S®ZCxxx Millimeter-Wave Converters
ZCxxx_dat-sw_en_3607-1471-22_v0200_cover.indd 1
Data Sheet | 02.00
Test & Measurement
R&S®ZCxxx
Millimeter-Wave Converters
Specifications
21.07.2015 15:09:16
Version 02.00, July 2015
CONTENTS
Definitions ....................................................................................................................................................................... 3
General information ........................................................................................................................................................ 4
Specifications .................................................................................................................................................................. 5
Test port .................................................................................................................................................................................................. 5
Source input (RF IN) ............................................................................................................................................................................... 5
Local oscillator input (LO IN) ................................................................................................................................................................... 5
Measurement output (MEAS OUT) ......................................................................................................................................................... 5
Reference output (REF OUT) ................................................................................................................................................................. 5
USB connector (USB
) .................................................................................................................................................................... 5
Power supply input (POWER SUPPLY) ................................................................................................................................................. 6
System characteristics ............................................................................................................................................................................ 6
General data .................................................................................................................................................................... 9
Ordering information .................................................................................................................................................... 11
2
®
Rohde & Schwarz R&S ZCxxx Millimeter-Wave Converters
Version 02.00, July 2015
Definitions
General
Product data applies under the following conditions:
•
•
•
•
Three hours storage at ambient temperature followed by 30 minutes warm-up operation
Specified environmental conditions met
Recommended calibration interval adhered to
All internal automatic adjustments performed, if applicable
Specifications with limits
Represent warranted product performance by means of a range of values for the specified parameter. These specifications are
marked with limiting symbols such as <, ≤, >, ≥, ±, or descriptions such as maximum, limit of, minimum. Compliance is ensured by
testing or is derived from the design. Test limits are narrowed by guard bands to take into account measurement uncertainties, drift
and aging, if applicable.
Non-traceable specifications with limits (n. trc.)
Represent product performance that is specified and tested as described under “Specifications with limits” above. However, product
performance in this case cannot be warranted due to the lack of measuring equipment traceable to national metrology standards. In
this case, measurements are referenced to standards used in the Rohde & Schwarz laboratories.
Specifications without limits
Represent warranted product performance for the specified parameter. These specifications are not specially marked and represent
values with no or negligible deviations from the given value (e.g. dimensions or resolution of a setting parameter). Compliance is
ensured by design.
Typical data (typ.)
Characterizes product performance by means of representative information for the given parameter. When marked with <, > or as a
range, it represents the performance met by approximately 80 % of the instruments at production time. Otherwise, it represents the
mean value.
Nominal values (nom.)
Characterize product performance by means of a representative value for the given parameter (e.g. nominal impedance). In contrast to
typical data, a statistical evaluation does not take place and the parameter is not tested during production.
Measured values (meas.)
Characterize expected product performance by means of measurement results gained from individual samples.
Uncertainties
Represent limits of measurement uncertainty for a given measurand. Uncertainty is defined with a coverage factor of 2 and has been
calculated in line with the rules of the Guide to the Expression of Uncertainty in Measurement (GUM), taking into account
environmental conditions, aging, wear and tear.
Device settings and GUI parameters are indicated as follows: “parameter: value”.
Non-traceable specifications with limits, typical data as well as nominal and measured values are not warranted by Rohde & Schwarz.
®
Rohde & Schwarz R&S ZCxxx Millimeter-Wave Converters
3
Version 02.00, July 2015
General information
®
The R&S ZCxxx millimeter-wave converters are optional for the following four-port vector network analyzers:
®
®
®
®
®
R&S ZVA24, R&S ZVA40, R&S ZVA50 or R&S ZVA67, and R&S ZVT20 with at least four ports. The converters facilitate
®
measurements in the millimeter-wave frequency range. The R&S ZCxxx millimeter-wave converters are available for the frequency
®
®
bands from 140 GHz to 220 GHz (R&S ZC220) and from 220 GHz to 330 GHz (R&S ZC330). Other frequency bands are covered by
®
other models from the R&S ZVA-Zxxx converter series.
The millimeter-wave converters consist of a dedicated reflectometer module containing a directional coupler, a frequency multiplier for
generating the source signal, two harmonic mixers as downconverters, and a manually adjustable attenuator for output power
®
adjustment. In addition, the R&S ZCxxx converters allow output power leveling and power sweeps by adjusting the RF input power.
®
®
The four-port network analyzer must be equipped with the R&S ZVAxx-B16 and R&S ZVA-K8 options.
®
The R&S ZCxxx millimeter-wave converters come with the following accessories:
•
•
•
•
•
•
Hex ball driver
Two coaxial cables with SMA connectors for the reference and measurement output signals
Waveguide-to-waveguide adapter (test port adapter, factory mounted)
DC cable and USB cable
Waveguide flange screws and dowel pins
Documentation
®
®
The R&S ZCxxx millimeter-wave converters must be operated with the R&S ZCPS power supply module (available as an option;
one module supplies two converters).
4
®
Rohde & Schwarz R&S ZCxxx Millimeter-Wave Converters
Version 02.00, July 2015
Specifications
Test port
®
Frequency range
R&S ZC220
®
R&S ZC330
IEEE 1785
®
R&S ZC220
®
R&S ZC330
anti-cocking flange
Waveguide designator
140 GHz to 220 GHz
220 GHz to 330 GHz
WM-1295
WM-864
precision waveguide flange
compatible with UG-387/U-M
®
®
at +7 dBm input power from the R&S ZVA/R&S ZVT20
®
R&S ZC220
140 GHz to 145 GHz
> –5 dBm (n. trc.), typ. 0 dBm
145 GHz to 200 GHz
> –3 dBm (n. trc.), typ. +1 dBm
200 GHz to 220 GHz
> –9 dBm (n. trc.), typ. –4 dBm
®
R&S ZC330
220 GHz to 320 GHz
> –11 dBm (n. trc.), typ. –8 dBm
320 GHz to 330 GHz
> –12 dBm (n. trc.), typ. –9 dBm
®
R&S ZC220 manually adjustable
0 dB to 40 dB
®
R&S ZC330 manually adjustable
0 dB to 40 dB
at 0 dB attenuator setting
®
R&S ZC220
< 13 dB (n. trc.)
®
R&S ZC330
< 7 dB (n. trc.)
®
R&S ZC220
+20 dBm
®
R&S ZC330
+20 dBm
Connector type
Output power
Output power attenuation
Output power frequency response at
minimum attenuation (peak-to-peak)
Damage level
Source input (RF IN)
Connector type
®
2.92 mm, female
2.92 mm, female
11.667 GHz to 18.333 GHz
12.222 GHz to 18.333 GHz
+5 dBm to +10 dBm
+5 dBm to +10 dBm
®
2.92 mm, female
2.92 mm, female
11.643 GHz to 18.310 GHz
9.155 GHz to 13.738 GHz
+5 dBm to +10 dBm
+5 dBm to +10 dBm
R&S ZC220
®
R&S ZC330
®
R&S ZC220
®
R&S ZC330
®
R&S ZC220
®
R&S ZC330
Frequency range
Input power range
Local oscillator input (LO IN)
Connector type
R&S ZC220
®
R&S ZC330
®
R&S ZC220
®
R&S ZC330
®
R&S ZC220
®
R&S ZC330
Frequency range
Input power range
Measurement output (MEAS OUT)
Connector type
®
SMA, female
SMA, female
5 MHz to 2000 MHz
5 MHz to 2000 MHz
®
SMA, female
SMA, female
5 MHz to 2000 MHz
5 MHz to 2000 MHz
®
universal serial bus (USB), type B
universal serial bus (USB), type B
R&S ZC220
®
R&S ZC330
®
R&S ZC220
®
R&S ZC330
Frequency range
Reference output (REF OUT)
Connector type
R&S ZC220
®
R&S ZC330
®
R&S ZC220
®
R&S ZC330
Frequency range
USB connector (USB
Connector type
)
R&S ZC220
®
R&S ZC330
®
Rohde & Schwarz R&S ZCxxx Millimeter-Wave Converters
5
Version 02.00, July 2015
Power supply input (POWER SUPPLY)
®
Connector type
R&S ZC220
®
R&S ZC330
®
Power consumption
R&S ZC220
®
R&S ZC330
®
ODU MINI-SNAP 19-pin miniature
circular connector with push-pull locking
®
ODU MINI-SNAP 19-pin miniature
circular connector with push-pull locking
20 W
30 W
System characteristics
®
Trace stability
R&S ZC220
typ. < 0.3 dB and typ. < 4°
®
R&S ZC330
typ. < 0.4 dB and typ. < 6°
Trace stability is defined as the maximum deviation of the max. or min. hold trace of the reflection factor from its initial (reference)
trace when measuring a converter whose waveguide port is terminated with a short. The data is valid if the ambient temperature of
®
®
the R&S ZVA/R&S ZVT20 and the converter has not changed by more than 1 K over 1 hour, the output power of the converter is
unattenuated and the measurement bandwidth is set to 100 Hz.
®
1
Source match
R&S ZC220
> 25 dB (n. trc.)
®
1
(without system error correction)
R&S ZC330
> 20 dB (n. trc.)
®
1
Directivity
R&S ZC220
> 25 dB (n. trc.)
®
1
(without system error correction)
R&S ZC330
> 20 dB (n. trc.)
®
Effective source match
R&S ZC220
> 30 dB (meas.)
®
(with system error correction)
R&S ZC330
> 30 dB (meas.)
®
Effective directivity
R&S ZC220
> 30 dB (meas.)
®
(with system error correction)
R&S ZC330
> 30 dB (meas.)
®
Dynamic range
R&S ZC220
> 100 dB, typ. 110 dB
®
R&S ZC330
> 100 dB, typ. 115 dB
Dynamic range is defined as the difference between the data trace of the transmission magnitude with maximum test port output
power and both test ports through-connected on the one hand and the RMS value of the data trace of the transmission magnitude
produced by noise and crosstalk with the test ports short-circuited on the other hand. The specification is valid without system error
correction and at 10 Hz measurement bandwidth. The dynamic range can be increased by using a measurement bandwidth of 1 Hz.
1
6
Measurement uncertainty not considered.
®
Rohde & Schwarz R&S ZCxxx Millimeter-Wave Converters
Version 02.00, July 2015
®
Test port output power versus frequency of the R&S ZC220.
®
Test port output power versus frequency of the R&S ZC330.
®
Rohde & Schwarz R&S ZCxxx Millimeter-Wave Converters
7
Version 02.00, July 2015
®
Dynamic range versus frequency of the R&S ZC220.
®
Dynamic range versus frequency of the R&S ZC330.
8
®
Rohde & Schwarz R&S ZCxxx Millimeter-Wave Converters
Version 02.00, July 2015
General data
Temperature loading
operating temperature range
permissible temperature range
storage temperature range
Damp heat
Mechanical resistance
vibration, sinusoidal
vibration, random
shock
Operation
Dimensions (W × H × D)
Number of feet
Feet height
Weight
Shipping weight
permissible altitude
with feet height adjusted to
12.1 mm (0.5 in)
alternatively
user-adjustable
+18 °C to +28 °C
+5 °C to +40 °C
–40 °C to +70 °C
in line with IEC 60068-2-1 and
IEC 60068-2-2
+40 °C at 80 % rel. humidity,
in line with IEC 60068-2-30
5 Hz to 150 Hz,
in line with IEC 60068-2-6
10 Hz to 300 Hz,
in line with IEC 60068-2-64
40 g shock spectrum,
in line with MIL-STD-810, method 516,
procedure I
3000 m above sea level
123 mm × 88.38 mm × 322.5 mm
(4.84 in × 3.48 in × 12.70 in)
3 or 4
12.1 mm to 29.1 mm
(0.5 in to 1.1 in)
3 kg (7 lb)
5 kg (11 lb)
®
Rohde & Schwarz R&S ZCxxx Millimeter-Wave Converters
9
Version 02.00, July 2015
Type/Waveguide
®
R&S ZC220/WM-1295
®
R&S ZC330/WM-864
Dimension X
61.9 mm
45.0 mm
Dimension Y
59.5 mm
47.5 mm
®
Dimensions (in mm) of the R&S ZCxxx millimeter-wave converters.
10
®
Rohde & Schwarz R&S ZCxxx Millimeter-Wave Converters
Version 02.00, July 2015
Ordering information
Designation
Converter WM-1295
Converter WM-864
Converter Set Transport Case
Converter Power Supply (supplies two converters)
Test Cable, 3.5 mm (f) to 3.5 mm (m), length: 910 mm
(two cables per converter required)
Test Cable, 2.92 mm (f) to 2.92 mm (m), length: 910 mm
(two cables per converter required)
Waveguide Calibration Kit WR05 (without sliding match),
compatible with converter WM-1295
Waveguide Calibration Kit WR05 (with sliding match),
compatible with converter WM-1295
Waveguide Calibration Kit WR03 (without sliding match),
compatible with converter WM-864
Waveguide Calibration Kit WR03 (with sliding match),
compatible with converter WM-864
Converter Control Software
Adapter Kit, including a power divider and two right angle
®
SMA (m/m) adapters (required if R&S ZVA24 var. 28 or
®
R&S ZVA40 var. 48 (VNAs with four sources) is used)
Adapter Kit, including four 1.85 mm (f) to 2.92 mm (m) adapters
and four 1.85 mm (m) to 2.92 mm (f) adapters (required if
®
R&S ZVA50 is used)
Adapter Kit, including a power divider, two right angle
SMA (m/m) adapters, three 1.85 mm (f) to 2.92 mm (m) adapters
and four 1.85 mm (m) to 2.92 mm (f) adapters (required if
®
R&S ZVA67 is used)
Torque Wrench, for waveguide flange screws
Angled Wrench, for waveguide flange screws
Type
®
R&S ZC220
®
R&S ZC330
®
R&S ZCSTC
®
R&S ZCPS
®
R&S ZV-Z193
R&S ZV-Z1000
®
R&S ZCAW
Service options
Extended Warranty, one year
Extended Warranty, two years
Extended Warranty, three years
Extended Warranty, four years
Extended Warranty with Calibration Coverage, one year
Extended Warranty with Calibration Coverage, two years
Extended Warranty with Calibration Coverage, three years
Extended Warranty with Calibration Coverage, four years
R&S WE1
®
R&S WE2
®
R&S WE3
®
R&S WE4
®
R&S CW1
®
R&S CW2
®
R&S CW3
®
R&S CW4
Order No.
1323.7646.02
1323.7669.02
1323.7730.00
1325.6101.02
1306.4520.36
®
1306.4536.36
®
1307.8106.10
®
1307.8106.11
®
1307.7300.30
®
1307.7300.31
®
1307.7022.02
1323.7746.24
®
1323.7746.50
®
1323.7746.67
®
1314.5467.02
1175.1960.00
®
Please contact your local
Rohde & Schwarz sales office.
R&S ZV-Z195
R&S ZV-WR05
R&S ZV-WR05
R&S ZV-WR03
R&S ZV-WR03
R&S ZVA-K8
®
R&S ZCAK
R&S ZCAK
R&S ZCAK
Extended warranty with a term of one to four years (WE1 to WE4)
2
Repairs carried out during the contract term are free of charge . Necessary calibration and adjustments carried out during repairs are
also covered. Simply contact the forwarding agent we name; your product will be picked up free of charge and returned to you in top
condition a couple of days later.
Extended warranty with calibration (CW1 to CW4)
Enhance your extended warranty by adding calibration coverage at a package price. This package ensures that your
2
Rohde & Schwarz product is regularly calibrated, inspected and maintained during the term of the contract. It includes all repairs and
calibration at the recommended intervals as well as any calibration carried out during repairs or option upgrades.
For product brochure, see PD 3607.1471.12 and www.rohde-schwarz.com
2
Excluding defects caused by incorrect operation or handling and force majeure. Wear-and-tear parts are not included.
®
Rohde & Schwarz R&S ZCxxx Millimeter-Wave Converters
11
Service that adds value
Worldwide
Local and personalized
❙ Customized and flexible
❙ Uncompromising quality
❙ Long-term dependability
❙
❙
About Rohde & Schwarz
The Rohde & Schwarz electronics group offers innovative
solutions in the following business fields: test and measurement, broadcast and media, secure communications,
cybersecurity, radiomonitoring and radiolocation. Founded
more than 80 years ago, this independent company has
an extensive sales and service network and is present in
more than 70 countries. The electronics group is among
the world market leaders in its established business fields.
The company is headquartered in Munich, Germany. It
also has regional headquarters in Singapore and Columbia,
Maryland, USA, to manage its operations in these regions.
Sustainable product design
❙❙ Environmental compatibility and eco-footprint
❙❙ Energy efficiency and low emissions
❙❙ Longevity and optimized total cost of ownership
Certified Quality Management
ISO 9001
Certified Environmental Management
ISO 14001
Rohde & Schwarz GmbH & Co. KG
www.rohde-schwarz.com
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG
Trade names are trademarks of the owners
PD 3607.1471.22 | Version 02.00 | July 2015 (ch)
R&S®ZCxxx Millimeter-Wave Converters
Data without tolerance limits is not binding | Subject to change
© 2015 Rohde & Schwarz GmbH & Co. KG | 81671 Munich, Germany
3607.1471.22 02.00 PDP 1 en
Regional contact
❙❙ Europe, Africa, Middle East | +49 89 4129 12345
[email protected]
❙❙ North America | 1 888 TEST RSA (1 888 837 87 72)
[email protected]
❙❙ Latin America | +1 410 910 79 88
[email protected]
❙❙ Asia Pacific | +65 65 13 04 88
[email protected]
❙❙ China | +86 800 810 82 28 | +86 400 650 58 96
[email protected]
3607147122
ZCxxx_dat-sw_en_3607-1471-22_v0200_cover.indd 2
21.07.2015 15:09:16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement