Datasheet HYPER-BT
Single Board Computer
Embedded Board
HYPER-BT
Front Panel
System Fan
w w w.ieiworld.com
PICO-ITX SBC supports Intel® 22nm Atom™/Celeron® on-board SoC, DDR3L,
VGA/iDP, GbE, USB 3.0, SATA 3Gb/s, HD Audio and RoHS
One 204-pin 1066/1333 MHz
single-channel DDR3L SO-DIMM
Intel® Atom™ Bay Trail SoC
processor on the solder side
Audio
RS-232
SATA 3Gb/s
2 x USB 2.0
You can attach aluminum heat spreader directly to your
construction for better heat dissipation
Thermal conductive direction
Aluminum heat spreader
iDP
12V DC power input
VGA
USB 2.0
PCBA
LAN
Intel® Atom™ SoC
DDR3
1333
USB 3.0
Specifications
SoC
Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W)
Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W)
Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W)
Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=5W)
Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W)
Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W)
Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W)
BIOS
AMI UEFI BIOS
Memory
One 204-pin 1066/1333 MHz single-channel DDR3L SO-DIMM supports up to 8GB
(J1900, N2930, E3845, E3827, E3826) or 4GB (N2807, E3825, E3815)
Graphics
Intel® HD Graphics Gen 7 Engines with 4 execution units, supporting DX11.1 OpenGL 4.2
and OpenCL 1.2
Display Output
Dual independent display
1 x VGA (up to [email protected])
1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to [email protected])
Ethernet
LAN: Intel® I211-AT PCIe controller
Super IO
Fintek F81866
I/O Interfaces
1 x RS-232 (by pin header)
1 x SATA 3Gb/s with 5V SATA power connector
1 x USB 3.0 (on rear I/O)
3 x USB 2.0 (1 on rear I/O, 2 by pin header)
Audio
Realtek ALC662 HD codec supports 5.1 channel
Front Panel
1 x 6-pin (1x6) wafer for power LED & HDD LED
1 x 2-pin (1x2) wafer for power button
1 x 2-pin (1x2) wafer for power reset button
LAN LED
1 x 2-pin (1x2) header
Fan Connector: 1 x 4-pin system fan connector
Watchdog Timer: Software programmable, support 1~255 sec. system reset
Power Supply
12V DC power input only, AT/ATX supported
1 x External DC power jack
Power Consumption
[email protected] (Intel® Celeron® J1900 CPU, 1 x 4GB 1333 MHz DDR3 memory)
Operating Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Operating Humidity: 5% ~ 95%, non-condensing
Dimensions (LxW)
Single board: 100mm x 72mm
Heat spreader: 112mm x 78mm
Weight: GW:600g / NW:250g
SATA 3Gb/s
PCIe GbE
Features
1. PICO-ITX SBC supports Intel® 22nm Atom™ or Celeron® on-board SoC
2. 12V only single voltage design for AT/ATX power by DC power jack
3. VGA and iDP support dual display
4. IEI One Key Recovery solution allows you to create rapid OS backup and recovery
Packing List
1 x HYPER-BT single board computer
1 x SATA with 5V output cable kit (P/N: 32801-000201-300-RS)
1 x Audio cable (P/N: 32000-072100-RS)
1 x RS-232 cable (P/N: 32200-000049-RS)
1 x QIG
1 x One Key Recovery CD
1 x Utility CD
Ordering Information
Part No.
Description
HYPER-BT-J19001-R10
PICO-ITX SBC supports Intel® Celeron® quad-core J1900
(10W) on-board SoC with DDR3L, VGA/iDP, GbE, USB 3.0,
SATA 3Gb/s, Audio and RoHS
HYPER-BT-N29301-R10
PICO-ITX SBC supports Intel® Celeron® quad-core N2930
(7.5W) on-board SoC with DDR3L, VGA/iDP, GbE, USB 3.0,
SATA 3Gb/s, Audio and RoHS
HYPER-BT-N28071-R10
PICO-ITX SBC supports Intel® Celeron® dual-core N2807
(4.3W) on-board SoC with DDR3L, VGA/iDP, GbE, USB 3.0,
SATA 3Gb/s, Audio and RoHS
HYPER-BT-E38XX1-R10**
PICO-ITX SBC supports Intel® Atom™ E38XX on-board SoC
with DDR3L, VGA/iDP, GbE, USB 2.0, SATA 3Gb/s, Audio
and RoHS
32000-070301-RS
Dual-port USB cable
32200-000049-RS
RS-232 cable, 200mm, DB-9 2x5P P=2.0
32006-000300-100-RS
PS/2 KB/MS Y-cable without bracket
DP-LVDS-R10
DisplayPort to 24-bit dual-channel LVDS converter board
(for IEI iDP connector)
DP-HDMI-R10
DisplayPort to HDMI converter board (for IEI iDP connector)
DP-DVI-R10
DisplayPort to DVI-D converter board (for IEI iDP connector)
DP-VGA-R10
DisplayPort to VGA converter board (for IEI iDP connector)
DP-DP-R10
DisplayPort to DisplayPort converter board
(for IEI iDP connector)
**: Those item are by order production, MOQ: 100
HYPER-BT-2014-V15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement