Electrolux | EWG 14740 W | User manual | Electrolux EWG 14740 W User manual

132973570 EN.qxd
07/05/2007
13.49
Pagina
1
User Manual
Washing Machine
EWG 14740 W
132973570 EN.qxd
07/05/2007
13.49
Pagina
2
132973570 EN.qxd
07/05/2007
13.49
Pagina
3
electrolux 3
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully will
provide you with lots of pleasure in the future. The Electrolux ambition is to offer a
wide variety of quality products that make your life more comfortable. You find
some examples on the cover in this manual. Please take a few minutes to study
this manual so that you can take advantage of the benefits of your new machine.
We promise that it will provide a superior User Experience delivering Ease-ofMind. Good luck!
132973570 EN.qxd
07/05/2007
13.49
Pagina
4
4 contents electrolux
Contents
Safety information..............................5
Product description ...........................7
Control panel .....................................8
Use....................................................9
Washing hints ..................................18
International wash code symbol ......21
Washing programme ..................22-23
Programme information ...................24
Care and cleaning ...........................25
Something not working....................28
Techical data ...................................32
Consumption values ........................33
Installation .......................................34
Built-in .............................................40
Environment concerns .....................43
Guarantee conditions ......................44
Customer service centres ................46
The following symbols are used in this manual:
Important information concerning your personal safety and information on how
to avoid damaging the appliance.
General information and tips
Environmental information
132973570 EN.qxd
07/05/2007
13.49
Pagina
5
safety information electrolux 5
Safety Information
In the interest of your safety and to
ensure the correct use, before
installing and first using the
appliance, read this user manual
carefully, including its hints and
warnings. To avoid unnecessary
mistakes and accidents, it is
important to ensure that all people
using the appliance are thoroughly
familiar with its operation and safety
features. Save these instructions
and make sure that they remain
with the appliance if it is moved or
sold, so that everyone using it
through its life will be properly
informed on appliance use and
safety.
General safety
● It is dangerous to alter the
specifications or attempt to modify
this product in any way.
● During high temperature wash
programmes the door glass may get
hot. Do not touch it!
● Make sure that small pets do not
climb into the drum. To avoid this,
please check into the drum before
using.
● Any objects such as coins, safety
pins, nails, screws, stones or any
other hard, sharp material can cause
extensive damage and must not be
placed into the machine.
● Only use the advised quantities of
fabric softener and detergent.
Damage to the fabric can ensue if
you over-fill. Refer to the
manufacturer’s recommendations of
quantities.
●
●
●
●
Wash small items such as socks,
laces, washable belts etc in a
washing bag or pillow case as it is
possible for such items to slip down
between the tub and the inner drum.
Do not use your washing machine to
wash articles with whalebones,
material without hems or torn
material.
Always unplug the appliance and
turn off the water supply after use,
clean and maintenance.
Under no circumstances should you
attempt to repair the machine
yourself. Repairs carried out by
inexperienced persons may cause
injury or serious malfunctioning.
Contact your local Service Centre.
Always insist on genuine spare parts.
Installation
This appliance is heavy. Care should
be taken when moving it.
● When unpacking the appliance,
check that it is not damaged. If in
doubt, do not use it and contact the
Service Centre.
● All packing and transit bolts must be
removed before use. Serious
damage can occur to the product
and to property if this is not adhered
to. See relevant section in the user
manual.
● After having installed the appliance,
check that it is not standing on the
inlet and drain hose and the worktop
is not pressing the electrical supply
cable.
● If the machine is situated on a
carpeted floor, please adjust the feet
in order to allow air to circulate freely
● Always be sure, that there is no
water leakage from hoses and their
connections after the installation.
●
132973570 EN.qxd
07/05/2007
13.50
Pagina
6
6 safety information electrolux
●
●
●
If the appliance is installed in a
location subject to frost, please read
the “dangers of freezing”chapter.
Any plumbing work required to install
this appliance should be carried out
by a qualified plumber or competent
person.
Any electrical work required to install
this appliance should be carried out
by a qualified electrician or
competent person.
Use
This appliance is designed for
domestic use. It must not be used
for purposes other than those for
which it was designed.
● Only wash fabrics which are
designed to be machine washed.
Follow the instructions on each
garment label.
● Do not overload the appliance. See
the relevant section in the user
manual.
● Before washing, ensure that all
pockets are empty and buttons and
zips are fastened. Avoid washing
frayed or torn articles and treat
stains such as paint, ink, rust, and
grass before washing. Underwired
bras must NOT be machine washed.
● Garments which have been in
contact with volatile petroleum
products should not be machine
washed. If volatile cleaning fluids are
used, care should be taken to
ensure that the fluid is removed from
the garment before placing in the
machine.
● Never pull the power supply cable to
remove the plug from the socket;
always take hold of the plug itself.
●
●
Never use the washing machine if
the power supply cable, the control
panel, the working surface or the
base are damaged so that the inside
of the washing machine is
accessible.
Child safety
This washing machine is not
intended for use by young children
or infirm persons without
supervision.
● Young children should be supervised
to ensure that they do not play with
the appliance.
● The packaging components (e.g.
plastic film, polystyrene) can be
dangerous to children - danger of
suffocation! Keep them out of
children’s reach
● Keep all detergents in a safe place
out of children’s reach.
● Make sure that children or pets do
not climb into the drum. To avoid this
the machine incorporates special
feature. To activate this device, rotate
the button (without pressing it) inside
the door clockwise until the groove
is horizontal. If necessary use a coin.
●
P1131
To disable this device and restore
the possibility of closing the door,
rotate the button anti-clockwise until
the groove is vertical.
132973570 EN.qxd
07/05/2007
13.50
Pagina
7
electrolux product description 7
Product description
Your new appliance meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption.
The Jet system allows total use of detergent and reduces water consumption so
saving energy.
1
Detergent dispenser drawer
2
Control panel
3
Door opening handle
4
Drain filter
5
Adjustable feet
1
2
Cottons
Spin
Time Manager
Normal
Drain
Eco
Rinse
Prewash
Eco
Prewash
Silk
Temp.
Spin
Easy Iron
Extra Rinse
Delay
Start/Pause
Normal
Lingerie
Hand Wash
Special
Prewash
Wool
Delicates
Synthetics
EWG14740W
3
4
5
Detergent dispenser drawer
Prewash
Wash
Fabric Softener
EN008
132973570 EN.qxd
07/05/2007
13.50
Pagina
8
8 electrolux control panel
Control panel
Cottons
Time Manager
Normal
Spin
Eco
Drain
95º
Rinse
Prewash
Silk
Eco
Prewash
900
700
40º
30º
Temp.
Lingerie
Spin
Easy Iron
Extra
Start/Pause
Delay
Normal
Prewash
Hand Wash
Special
1400
60º
50º
Delicates
Wool
Synthetics
1
1
Programme selector dial
2
Temperature button
3
Spin reduction button
4
Easy Iron button
5
Extra Rinse button
6
Delay button
7
Display
8
Start/Pause button
9
Time manger buttons
EWG 14440 W
2
3
4
5
6
7
8
9
132973570 EN.qxd
07/05/2007
13.50
Pagina
9
use electrolux 9
Use
First Use
●
●
●
Ensure that the electrical and water
connections comply with the
installation instructions.
Remove the polystryrene block and
any material from the drum.
Run a cotton cycle at 90°C, without
any laundry in the machine, to
remove any manufacturing residue
from the drum and tub. Pour 1/2 a
measure of detergent into the
dispenser drawer and start the
machine.
There are two different ways to set this
option:
● before pressing the «Start/Pause»: it
will be impossible to start
themachine.
● after pressing the «Start/Pause» it
will be impossible to change any
other programme or option.
To enable (disable) this option press
simoultaneously for about 6 seconds
«Extra Rinse» and «Delay» buttons until
the icon
appears (disappears) on
(from) the display.
Temp.
Spin
Easy Iron
Extra Rinse
Delay
Start/Pause
Acoustic signals
The machine is provided of an acoustic
device, which sounds in the following
cases:
● when selecting a wash programme
● when depressing the options buttons
● in case of a wrong selection
● at the end of the cycle
● in the event of operating problems
Daily Use
Load the laundry
Open the door by carefully pulling the
door handle outwards. Place the laundry
in the drum, one item at a time, shaking
them out as much as possible. Close
the door.
By pressing the «Easy Iron» and «Extra
Rinse» buttons simultaneously for
about 6 seconds, the acoustic signal is
deactivated (except for the events of
operating problems).
By pressing these 2 buttons again, the
the acoustic signal is reactivated.
Child safety lock
This device permits you to leave the
appliance unsupervised without having
the worry that children might be injured
by or cause damage to the appliance.
This function remains able also when
the washing machine is not working.
P0004
Measure out the detergent and the
fabric softener
Pull out the dispenser drawer until it
stops. Measure out the amount of
132973570 EN.qxd
07/05/2007
13.50
Pagina
10
10 electrolux use
detergent required, pour it into the main
wash compartment
and, if you wish
to carry out a programme with the
«prewash» phase, pour it into the
compartment marked
.
2
3
4
5
spin speed
phase icons making up the
programme
soil degree
duration
The green Start/Pause light starts to
flash.
1
C0064
If required, pour fabric softener into the
compartment marked
(the amount
used must not exceed the “MAX” mark
in the drawer). Close the drawer gently.
2
3
5
The selector dial is divided into
following sections:
Cottons
Normal
Spin
Eco
Drain
Rinse
Prewash
Silk
Eco
Prewash
Lingerie
Normal
Prewash
Hand Wash
Special
Wool
Delicates
Synthetics
●
Cottons
: Normal,
Eco,
+Prewash and
Eco+Prewash
●
Synthetics
: Normal and
+Prewash .
Special
: Delicates
, Wool
Handwash
, Lingerie
and Silk
.
Rinses
and Spin
.
, Drain
C0065
Select the required programme
Turn the programme selector dial to
the required programme.
The buzzer sounds. The washing
machine will propose a temperature
and automatically select the maximum
spin value provided for the programme
you have chosen.
You can change these values by
operating the corresponding buttons.
The Display shows the following
information about the selected
programme proposed:
1 temperature
4
●
●
The selector dial can be turned either
clockwise or anticlockwise. Position
«O» to Reset programme/ Switching
OFF of the machine.
At the end of the programme the
selector dial must be turned to
position «O», to switch the machine
off.
132973570 EN.qxd
07/05/2007
13.50
Pagina
11
use electrolux 11
Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the red
«Start/Pause» pilot light will flash 3
times and the message Err will appear
on the display to indicate a wrong
selection. The machine will not perform
the new selected programme.
Programme Option buttons
Depending on the programme, different
functions can be combined. These
must be selected after choosing the
desired programme and before
depressing the «Start/Pause» button.
In any case if you select an option not
compatible with the selected
programme or option, the message Err
will displayed at the bottom of the
display for few seconds, and the
integrated red «Start/Pause» light start
flashing.
Select the temperature
Temp.
Spin
Easy Iron
Extra rinse
Delay
Press this button repeatedly to
increase or decrease the temperature,
if you want your laundry to be washed
at a temperature different from the one
proposed by the washing machine.
Maximum temperatures are 90°C for
Cottons, 60°C for Synthetics, 40°C for
Delicates, Wool, fabrics to be
handwashed and Lingerie
programmes, and 30°C for Silk, while
corresponds to cold wash.
During the washing cycle the
thermometer is animated.
Select the spin speed, No spin,
Rinse Hold or Night Cycle option
Temp.
Spin
Easy Iron
Extra rinse
Delay
Press the Spin button repeatedly to
change the spin speed, if you want
your laundry to be spun at a speed
different from the one proposed by the
washing machine.
During the spinning phase the spiral is
animated.
Maximum speeds are:
● for all Cottons: 1400 rpm;
● Wool and Handwash: 1000 rpm
● for Synthetics and Lingerie: 900 rpm;
● for delicate fabrics and Silk: 700 rpm.
No spin
option eliminates all the
spin phases (in some programmes
increases also the number of rinses).
Rinse Hold
: by selecting this
option the water of the last rinse is not
emptied out to prevent the fabrics from
creasing.
When the programme has finished the
display shows a 0.00 flashing, the
(Door) icon is still visualized, the
«Start/Pause» light is off and the door
is locked to indicate that the water
must be emptied out.
132973570 EN.qxd
23/05/2007
17.18
Pagina
12
12 electrolux use
To empty out the water:
●
●
●
●
●
turn the programme selector dial to
«O»
select the
Drain or
Spin
programme
reduce the spin speed if needed, by
means of the relevant button
depress «Start/Pause» button
at the end of the programme, the
display shows a 0.00 flashing.
The
(Door locked) icon desappears
and the door can be opened.
Night Cycle
: by selecting this
option, the machine will not drain the
water of the last rinse, so as not to
wrinkle the laundry.
As all spinning phases are suppressed,
this washing cycle is very noiseless and
it can be selectionned at night or in
times with a more economical power
rate.
In some programmes the rinses will be
performed with more water.
When the programme has finished, the
display shows a 0.00 flashing, the
(Door locked) icon is still visualized, the
«Start/Pause» light is off and the door
is locked to indicate that the water
must be emptied out.
To empty out the water, please
read the previous option steps.
Select the Easy Iron option
Selecting this button the laundry is
gently washed and spun to avoid any
creasing. In this way ironing is easier.
Furthermore the machine will perform
some additional rinses for cotton and
synthetics.
Temp.
Spin
Easy Iron
Extra rinse
Delay
This function can be used for cotton
and synthetic fabrics.
Select the Extra Rinse option
Temp.
Spin
Easy Iron
Extra rinse
Delay
The machine performs some additional
rinses.
This option is recommended for people
who are allergic to detergents, and in
areas where the water is very soft.
Select the Delay start
Before you start the programme, if
you wish to delay the start, press the
«Delay» button repeatedly, to select the
desired delay.
The corresponding icon
will appear
on the display in the upper part of the
display.
The selected delay time value (up to 20
hours) will appear on the display for
about 3 seconds, then the duration of
the programme will appear again.
Temp.
Spin
Easy Iron
Extra rinse
Delay
132973570 EN.qxd
07/05/2007
13.50
Pagina
13
use electrolux 13
You must select this option after you
have set the programme and before
you press the «Start/Pause» button.
If you wish to add laundry in the
machine during the delay time you will
press «Start/Pause» button to put the
machine in pause. Add the laundry,
close the door and press «Start/Pause»
button again.
You can cancel the delay time at any
moment, before you press the
Start/Pause button.
The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum
of 20 hours by means of this button.
Display
The display shows the following
information:
Duration of the selected
programme
After selecting a programme, the
duration is displayed in hours and
minutes (for example 2.05). The
segments inside the clock icon are
animated.
The duration is calculated automatically
on the basis of the maximum
recommended load for each type of
fabric.
Selecting the delayed start.
• Select the programme and the
required options.
• Select the delay start.
• Depress «Start/Pause» button: the
machine starts its hourly countdown.
The programme will start after the
selected delay has expired.
Cancelling the delayed start
• Depress «Start/Pause» button.
• Depress «Delay» button, the symbol
0’ is displayed.
• Depress «Start/Pause» button again.
The Delay cannot be selected with
Drain
programme.
Temp.
Spin
Easy Iron
Extra rinse
Delay
After the programme has started, the
time remaining is updated every minute.
Washing programme phase icons
By selecting the wash programme, all
the washing programme phase icons
corresponding to the various phases
making up the programme are shown in
the upper part of the display.
Temp.
Spin
Easy Iron
Extra rinse
Delay
132973570 EN.qxd
07/05/2007
13.50
Pagina
14
14 electrolux use
After you have pressed the
«Start/Pause» button and the machine
has started, the
(Door locked) icon is
lighted-on and only the phase running
icon stays on. The segments inside the
clock icon are animated.
When the programme has finished, a
flashing zero (0.00) is displayed and the
(Door locked) icon desappears.
Alarm codes
In the event of operating problems,
some alarm codes can be displayed, for
example E20 (see paragraph
“Something not working”).
Easy Iron
Delay
The selected delay (20 hours max) set
by means of the relevant button appears
on the display for about 3 seconds, then
the duration of the previously selected
programme is displayed. The relevant
phase icon
is lighted-on.
The delay time value decreases by one
unit every hour and then, when 1 hour
remains, the time decreases every
minute.
Spin
Easy Iron
Extra rinse
Delay
Extra rinse
Delay
Start/Pause
Heating phase
During the washing cycle the display
shows the temperature icon animated
to indicate that the appliance has
started the heating phase of the water
in the tub.
Temp.
Extra rinse
Start/Pause
Delay
Incorrect option selection
If an option which is not compatible with
the set wash programme is selected,
the message Err is displayed at the
bottom of the display for about 2
seconds and the integrated red
«Start/Pause» light start flashing.
Easy Iron
Delay
End of programme
When the programme has finished a
flashing zero is displayed, the
(Door
locked) icon desappears and the door
can be opened.
Easy Iron
Temp.
Extra rinse
Start/Pause
Spin
Easy Iron
Extra rinse
Delay
132973570 EN.qxd
07/05/2007
13.50
Pagina
15
use electrolux 15
Select the Start/Pause
Easy Iron
Extra rinse
Delay
Start/Pause
To start the selected programme, press
the «Start/Pause» button; the green
pilot light stops flashing.
The «door locked»
icon appears
on the display to indicate that the
appliance starts operating and the door
is locked.
To interrupt a programme which is
running, depress the «Start/Pause»
button: the green pilot light starts to
flash.
To restart the programme from the
point at which it was interrupted,
press the «Start/Pause» button again.
If you have chosen a delayed start, the
machine will begin the countdown.
If an incorrect option is selected, an
integrated red pilot light of the
«Start/Pause» button flashes 3 times
the message Err is displayed for about
2 seconds. Three acoustic signals
sound.
Select the “Time Manager” option
Time Manager
Temp.
Spin
Easy Iron
Extra rinse
This function allows you to modify the
washing time, automatically proposed
by the washing machine.
By pressing the «Time manager»
buttons
and
repeatedly, the
duration of the washing cycle can be
increased or decreased.
The Time manager option cannot be
selected with Eco programmes.
The soil level icon
visualized on the
display will change to indicate which
type of soil degree you have chosen.
Soil
Level
Icon
Type of fabric
Intensive
For heavy soiled items
Normal
For normal soiled items
Daily
For daily soiled items
Light
For slightly soiled items
Quick
For very slightly soiled items
Super
Quick (*)
For items used or worn for a
short time
(*) Max. load for cotton: 2.5 kg.
Max. load for synthetic and
delicate: 1.5 kg.
Note
Once the programme has started the
Time manager option cannot be
changed.
Delay
Attention!
The «Time Manager» option cannot be
selected with the Eco programmes.
132973570 EN.qxd
07/05/2007
13.50
Pagina
16
16 electrolux use
The availability of these soil level icons
change according to the type of fabric
as shown in the following chart:
Fabric
Soil Level
Cottons
90°C
60°C
50°C
40°C
30°C
(cold)
Synthetics
60°C
50°C
40°C
30°C
(cold)
Delicates
40°C
30°C
(cold)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Altering an option or a running
programme
It is possible to change any option
before the programme carries it out.
Before you make any change, you
must pause the washing machine by
pressing the «Start/Pause» button.
(Only the Time Manager option cannot
be modified after the programme has
started.)
Changing a running programme is
possible only by resetting it. Turn the
programme selector dial to O and then
to the new programme position. Start
the new programme by depressing the
«Start/Pause» button again. The
washing water in the tub will not
emptied out.
Interrupting a programme
Depress the «Start/Pause» button to
interrupt a programme which is
running, the corresponding light starts
to flash. Depress the button again to
restart the programme.
Cancelling a programme
Turn the selector dial to O to cancel a
programme which is running. Now you
can select a new programme.
Opening the door after the
programme has started
First set the machine to pause by
pressing the «Start/Pause» button.
If the «Door locked»
icon
desappears on the display, the door
can be opened.
If the «Door locked»
light does not
goes off, this means that the machine
is already heating, that the water level
is above the bottom edge of the door
or that the drum is turning. In this case
the door can not be opened.
If you cannot open the door but you
need to open it you have to switch the
machine off by turning the selector dial
to O.
After about few minutes the door can
be opened (pay attention to the
water level and temperature!).
132973570 EN.qxd
07/05/2007
13.50
Pagina
17
use electrolux 17
At the end of the programme
The machine stops automatically.
Some acoustic signals sound for few
minutes.
If the Rinse Hold
or Night Cycle
options have been selected, the
Start/Pause light goes off, a flashing
“0.00” will appear on the display, the
(Door locked) icon is still visualized
and the door remains locked to
indicate that the water must be
emptied out before opening the door.
To empty out the water please read
the steps on the Rinse Hold option
paragraph.
At the end of the cycle, turn the
programme selector dial to «O» to
switch the machine off. Remove the
laundry from the drum and carefully
check that the drum is empty. If you do
not intend to carry out another wash,
close the water tap.
Leave the door open to prevent the
formation of mildew and unpleasant
smells.
132973570 EN.qxd
07/05/2007
13.50
Pagina
18
18 electrolux washing hints
Washing hints
Sorting the laundry
Follow the wash code symbols on each
garment label and the manufacturer’s
washing instructions. Sort the laundry as
follows: whites, coloureds, synthetics,
delicates, woollens.
Temperatures
for normally soiled white
cottons and linen (e.g. tea
90°
cloths, towels, tablecloths,
sheets...)
for normally soiled, colour
fast garments (e.g. shirts,
night dresses, pyjamas....) in
50°/60° linen, cotton or synthetic
fibres and for lightly soiled
white cotton (e.g.
underwear).
for delicate items (e.g. net
curtains), mixed laundry
including synthetic fibres and
(Cold)
woollens bearing the label
30°-40° «pure new wool, machine
washable, non-shrink».
Before loading the laundry
Never wash whites and coloureds
together. Whites may lose their
“whiteness” in the wash.
New coloured items may run in the first
wash; they should therefore be washed
separately the first time.
Make sure that no metal objects
are left in the laundry (e.g. hair
clips, safety pins, pins).
Button up pillowcases, close zip
fasteners, hooks and poppers. Tie any
belts or long tapes.
Remove persistent stains before
washing.
Rub particularly soiled areas with a
special detergent or detergent paste.
Treat curtains with special care.
Remove hooks or tie them up in a bag
or net.
Maximum loads
Recommended loads are indicated in
the programme charts.
General rules:
Cotton, linen: drum full but not too
tightly packed;
Synthetics: drum no more than half
full;
Delicate fabrics and woollens: drum
no more than one third full.
Washing a maximum load makes the
most efficient use of water and energy.
For heavily soiled laundry, reduce the
load size.
Laundry weights
The following weights are indicative:
bathrobe
1200 g
napkin
100 g
quilt cover
700 g
sheet
500 g
pillow case
200 g
tablecloth
250 g
towelling towel
200 g
tea cloth
100 g
night dress
200 g
ladies’ briefs
100 g
man’s work shirt
600 g
man’s shirt
200 g
man’s pyjamas
500 g
blouse
100 g
men’s underpants
100 g
132973570 EN.qxd
07/05/2007
13.50
Pagina
19
washing hints electrolux 19
Removing stains
Stubborn stains may not be removed
by just water and detergent. It is
therefore advisable to treat them prior
to washing.
Blood: treat fresh stains with cold
water. For dried stains, soak overnight
in water with a special detergent then
rub in the soap and water.
Oil based paint: moisten with benzine
stain remover, lay the garment on a
soft cloth and dab the stain; treat
several times.
Dried grease stains: moisten with
turpentine, lay the garment on a soft
surface and dab the stain with the
fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water
or a rust removing product used cold.
Be careful with rust stains which are
not recent since the cellulose structure
will already have been damaged and
the fabric tends to hole.
Mould stains: treat with bleach, rinse
well (whites and fast coloureds only).
Grass: soap lightly and treat with
bleach (whites and fast coloureds only).
Ball point pen and glue: moisten with
acetone (*), lay the garment on a soft
cloth and dab the stain.
Lipstick: moisten with acetone as
above, then treat stains with
methylated spirits. Remove any
residual marks from white fabrics with
bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks
with bleach.
Ink: depending on the type of ink,
moisten the fabric first with acetone (*),
then with acetic acid; treat any residual
marks on white fabrics with bleach and
then rinse thoroughly.
Tar stains: first treat with stain
remover, methylated spirits or benzine,
then rub with detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on
the choice of detergent and use of the
correct quantities to avoid waste and
protect the environment. Although
biodegradable, detergents contain
substances which, in large quantities,
can upset the delicate balance of
nature.
The choice of detergent will depend on
the type of fabric (delicates, woollens,
cottons, etc.), the colour, washing
temperature and degree of soiling.
All commonly available washing
machine detergents may be used in
this appliance:
• powder detergents for all types of
fabric,
• powder detergents for delicate
fabrics (60°C max) and woollens,
• liquid detergents, preferably for low
temperature wash programmes
(60°C max) for all types of fabric, or
special for woollens only.
The detergent and any additives must
be placed in the appropriate
compartments of the dispenser drawer
before starting the wash programme.
If using concentrated powder or liquid
detergents, a programme without
prewash must be selected.
132973570 EN.qxd
07/05/2007
13.50
Pagina
20
20 electrolux washing hints
The washing machine incorporates a
recirculation system which allows an
optimal use of the concentrated
detergent.
Pour liquid detergent into the dispenser
drawer compartment marked
just
before starting the programme.
Any fabric softener or starching
additives must be poured into the
compartment marked
before
starting the wash programme.
Follow the product manufacturer’s
recommendations on quantities to use
and do not exceed the «MAX» mark
in the detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will
depend on the type of fabric, load size,
degree of soiling and hardness of the
water used.
Water hardness is classified in socalled “degrees” of hardness.
Information on hardness of the water in
your area can be obtained from the
relevant water supply company, or from
your local authority.
Follow the product manufacturers’
instructions on quantities to use.
Use less detergent if:
• you are washing a small load,
• the laundry is lightly soiled,
• large amounts of foam form during
washing.
Degrees of water hardness
Degrees
Level Characteristic German French
°dH
°T.H.
1
2
3
4
soft
medium
hard
very hard
0-7
8-14
15-21
> 21
0-15
16-25
26-37
> 37
132973570 EN.qxd
07/05/2007
13.50
Pagina
21
International wash code symbol electrolux 21
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
Energetic wash
95
60
40
30
Max. wash
temperature
95°C
Max. wash
temperature
60°C
Max. wash
temperature
40°C
Max. wash
temperature
30°C
Delicate wash
60
Bleaching
Bleach in cold water
40
Hand wash
30
40
Do not
wash
at all
Do not bleach
Ironing
Hot iron
max 200°C
Warm iron
max 150°C
Lukewarm iron
max 110°C
Do not iron
Dry cleaning
Dry cleaning
in all solvents
Dry cleaning in
perchlorethylene,
petrol, pure alcohol,
R 111 & R 113
Dry cleaning
in petrol,
pure alcohol
and R 113
Do not
dry clean
high
temperature
low
temperature
Drying
Flat
On the line
On clothes
hanger
Tumble dry
Do not
tumble dry
132973570 EN.qxd
07/05/2007
13.50
Pagina
22
22 electrolux washing programmes
Washing programmes
Programme/
Temperature
Cottons
Normal
90 Cottons
Eco
90 - 40°
Cottons
+ Prewash
90 -
Type of laundry
Options
Spin Red./No
Spin/Night Cycle/
Rinse Hold
Easy Iron, Extra
Rinse, Time Manager
Spin Red./No
White and fast
Spin/Night Cycle/
coloured cotton
Rinse Hold,
economy, lightly Easy Iron,
normally soiled items
Extra Rinse
Spin Red./No
Spin/Night Cycle/
White and coloured
Rinse Hold
cotton heavily soiled
Easy Iron, Extra
Rinse, Time Manager
White and coloured
cotton normally
soiled
Description of
programme
Main wash from
90°C to
(cold)
3 rinses
Long spin
Main wash from
90°C to 40°C
3 rinses
Long spin
Prewash at 30°C
Main wash from
90°C to
(cold)
3 rinses
Long spin
Spin Red./No
Spin/Night Cycle/
Rinse Hold,
Easy Iron,
Extra Rinse
Prewash at 30°C
Main wash from
90°C to 40°C
3 rinses
Long spin
Synthetics Synthetic or mixed
fabrics normally
Normal
soiled
60°-
Spin Red./No
Spin/Night Cycle/
Rinse Hold
Easy Iron, Extra
Rinse, Time Manager
Main wash from
60°C to
(cold)
3 rinses
Short spin
Synthetics
Synthetic or mixed
+ Prewash
fabrics heavily soiled
60° -
Spin Red./No
Spin/Night Cycle/
Rinse Hold
Easy Iron, Extra
Rinse, Time Manager
Prewash at 30°C
Main wash from
60°C to
(cold)
3 rinses
Short spin
Cottons
Eco+
Prewash
90 - 40°
Delicates
40°-
O
White and coloured
cotton economy,
lightly-normally
soiled
Delicate fabrics, for
example curtains.
Spin Red./No
Spin/Night Cycle/
Rinse Hold
Extra Rinse,
Time Manager
For cancelling the wash programme which
is running and for switching the machine
off.
Main wash from
40° to
(cold)
3 rinses
Short spin
132973570 EN.qxd
07/05/2007
13.50
Pagina
23
washing programmes electrolux 23
Washing programmes
Programme/
Temperature
Wool
40° -
Type of laundry
Options
Specially programme
for wool garments
Spin Red./
bearing the
No Spin/Night Cycle/
“Pure new wool, nonRinse Hold
shrink, machine
washable” label.
Special programme
Handwash
for hand washing
40° fabrics.
Description of
programme
Main wash from
40° to
(cold)
3 rinses
Short spin at 1000
rpm
Main wash from
(cold)
Spin Red./
40° to
No Spin/Night Cycle/
3 rinses
Rinse Hold
Short spin at 1000 rpm
Main wash at 40°C
Spin Red./No
3 rinses
Spin/Night Cycle/
Short spin at max
Rinse Hold
900 rpm
Lingerie
Extremely delicate
items
Silk
Silk items to be
gentle washed and
spun.
Spin Red./No
Spin/Night Cycle/
Rinse Hold
Main wash at 30°C
2 rinses
Short spin at 700 rpm
Separate rinse cycle
for cotton hand
washed items.
Spin Red./No
Spin/Night Cycle/
Rinse Hold, Easy
Iron, Extra Rinse
3 rinses
Long spin at the max
spin
40°
30°
Rinse
Drain
For emptying out the
last rinse water in
programmes with the
Rinse Hold or Night
Cycle option.
Spin
Separate spin for
cottons.
Cottons..........................................5.0 kg
Synthetics ......................................2.5 kg
Draining of water
Spin Reduction
Drain and long spin
Delicates ........................................2.5 kg
Wool/Handwash ............................1 . kg
Silk/Lingerie ....................................1 . kg
132973570 EN.qxd
07/05/2007
13.51
Pagina
24
24 electrolux programme information
Programme information
Economy
programmes
Wool and
Handwash
This programme can be selected for slightly or normally
soiled cotton and synthetic items. The temperature will
decrease and the washing time will be extended. This allows
to obtain a good washing efficiency by saving energy.
Washing programme for machine washable wool as well as
for hand washable woollens and delicate fabrics with the
“hand washing” care symbol
.
Silk
Delicate washing programme suitable for silk and mixed
synthetics items. Washing temperature is 30°C.
The maximum spin speed is automatically reduced to 700
rpm.
Rinses
With this programme it is possible to rinse and spin cotton
garments which have been washed by hand.
The machine performs 3 rinses, followed by a final spin at
maximum speed. The spin speed can be reduced by
depressing the corresponding button.
Drain
For emptying out the water of the last rinse in programmes
with the Rinse Hold
or Night Cycle
option.
Turn first the programme selector dial to «O», then select
programme
Drain and depress the «Start/Pause»
button.
Spin
Separate spin for hand washed garments and after
programmes with Rinse Hold
or Night Cycle
option.
Before selecting this programme the selector dial must be
turned to «O». You can choose the speed by means of the
relevant button to adapt it to the fabrics to be spun.
To reset a programme and to switch off the machine turn
O = Cancelling/OFF the selector dial to «O». Now can a new programme be
selected.
132973570 EN.qxd
07/05/2007
13.51
Pagina
25
care and cleaning electrolux 25
Care and cleaning
External cleaning
Clean the exterior cabinet of the
appliance with soap and water only,
and then dry thoroughly.
You must DISCONNECT the appliance
from the electricity supply, before you
can carry out any cleaning or
maintenance work.
Cleaning the dispenser drawer
The washing powder and additive
dispenser drawer should be cleaned
regularly.
Remove the drawer by pressing the
catch downwards and by pulling it out.
Flush it out under a tap, to remove any
traces of accumulated powder.
Descaling
The water we use normally contains
lime. It is a good idea to periodically
use a water softening powder in the
machine. Do this separately from any
laundry washing, and according to the
softening powder manufacturer's
instructions. This will help to prevent
the formation of lime deposits.
After each wash
Leave the door open for a while. This
helps to prevent mould and stagnant
smells forming inside the appliance.
Keeping the door open after a wash
will also help to preserve the door seal.
Maintenance Wash
With the use of low temperature
washes it is possible to get a build up
of residues inside the drum.
We recommend that a maintenance
wash be performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of
laundry.
• Select the hottest cotton wash
programme.
• Use a normal measure of detergent,
must be a powder with biological
properties.
C0066
To aid cleaning, the top part of the
additive compartment should be
removed.
C0067
Cleaning the drawer recess
Having removed the drawer, use a
small brush to clean the recess,
ensuring that all washing powder
residue is removed from the upper and
lower part of the recess.
Replace the drawer and run the rinse
programme without any clothes in the
drum.
132973570 EN.qxd
07/05/2007
13.51
Pagina
26
26 electrolux care and cleaning
Unscrew and remove the filter.
P0038
P0039
Cleaning the water drain filter
A clean filter is important for the correct
operating of the machine, and should
therefore be cleaned after every washing programme.
Place a container underneath to catch
any spillage. If the filter is blocked and
the machine is unable to drain you will
need to drain the water manually from
the machine at this stage.
To do this, unhook the drain hose from
the standpipe or sink and hold the end
of the hose over a bowl on the floor.
The water should drain by gravity into
the bowl.
When the bowl is full, hook the hose
back up and empty the bowl. Repeat
the procedure until water stops flowing
out.
P0037
Clean carefully under a fast running
tap.
P0040
Warning!
When the appliance is in use and
depending on the programme selected
there can be hot water in the filter.
Never remove the filter during a wash
cycle, always wait until the appliance
has finished the cycle, and is empty.
When replacing the filter, ensure it is
securely retightened so as to stop
leaks and young children being able to
remove it.
132973570 EN.qxd
07/05/2007
13.51
Pagina
27
care and cleaning electrolux 27
Cleaning the water inlet filter
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged.
It is therefore a good idea to clean it
from time to time.
Turn off the water tap. Unscrew the
water inlet hose. Clean the filter using a
hard bristle brush. Tighten up the inlet
hose.
P1090
The dangers of freezing
If the machine is exposed to temperatures below 0°C, certain precautions
should be taken.
• Turn off the water tap.
• Unscrew the inlet hose.
• Unhook the drain hose from the rear
support and position the end of this
hose and that of the inlet hose in a
bowl. Run the draining programme
«Drain».
• Disconnect the appliance.
• Screw the inlet hose and reposition
the drain hose.
• When you intend to start the
machine up again, make sure that
the room temperature is above 0°C.
Emergency emptying out
If the water is not discharged, proceed
as follows to empty out the machine:
• pull out the plug from the power
socket;
• close the water tap;
• if necessary, wait until the water has
cooled down;
• Unscrew and remove the filter;
• place a bowl on the floor. The water
should drain by gravity into the bowl.
When the bowl is full, empty the
bowl. Repeat the procedure until
water stops flowing out;
• clean the filter if necessary as
previously described;
• screw the filter again.
132973570 EN.qxd
07/05/2007
13.51
Pagina
28
28 electrolux Something not working
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can
be solved easily without calling out an engineer. Before contacting your local
Service Centre, please carry out the checks listed below.
During machine operation it is possible that the red «Start/Pause» pilot light flashes,
one of the following alarm codes appears on the display and at the same some
acoustic signals sound every 20 seconds to indicate that the machine is not working:
● E10: problem with the water supply
● E20: problem with water draining
● E40: door open.
Once the problem has been eliminated, press the «Start/Pause» button to restart
the programme. If after all checks, the problem persists, contact your local
Service Centre.
Malfunction
The washing machine does
not start:
Possible cause
Solution
The door has not been
closed. E40
● The plug is not properly
inserted in the power
socket.
● There is no power at the
socket.
● The main fuse or the fuse in
the plug has blown.
● The selector dial is not
correctly positioned and the
«Start/Pause» button has
not been depressed.
● The «Delay» has been
selected.
●
Close firmly the door.
●
Insert the plug into the
power socket.
●
Please check your domestic
electrical installation.
● Replace the fuse.
●
●
Please turn the selector dial
and press the «Start/Pause»
button again.
●
If the laundry are to be
washed immediately, cancel
the delay start.
The machine fills then
empties immediately:
●
The end of the drain hose is
too low.
●
Refer to relevant paragraph
in “water drainage” section.
The machine does not fill:
●
The water tap is closed.
●
Open the water tap.
E10
The inlet hose is squashed or
kinked. E10
● The filter in the inlet hose is
blocked. E10
● The door is not properly
closed. E40
●
Check the inlet hose
connection.
● Clean the water inlet hose
filter.
● Close firmly the door.
●
132973570 EN.qxd
07/05/2007
13.51
Pagina
29
Something not working electrolux 29
Malfunction
The machine does not
empty and/or does not spin:
Solution
Possible cause
The drain hose is squashed
or kinked.E20
● The drain pump is clogged.
●
Check the drain hose
connection.
● Clean the drain pump.
●
E20
The option
or
has
been selected.
● The option
has been
selected.
● The laundry is not evenly
distributed in the drum.
●
The door will not open:
●
The programme is still
running.
● The door lock has not been
released.
● There is water in the drum.
No water is visible in the
drum
●
There is water on the floor:
●
Select the programme
.
● Select the programme
●
●
or
Redistribute the laundry.
Wait the end of washing
cycle.
● Wait for the «Door locked»
icon
desappearing.
● Select drain or spin
programme to empty out
the water.
●
Machines based on modern
technology operate very
economically using very little
water without affecting
performance.
Too much detergent or
unsuitable detergent
(creates too much foam)
has been used.
● Check whether there are
any leaks from one of the
inlet hose fittings. It is not
always easy to see this as
the water runs down the
hose; check to see if it is
damp.
● The drain hose is damaged.
● The cap on the emergency
emptying hose has not
been replaced after
cleaning the pump.
●
Reduce the detergent
quantity or use another one.
●
Check the water inlet hose
connection.
●
Change it with a new one.
Put the cap back on the
emergency emptying and
place the latter back in its
seat.
●
132973570 EN.qxd
07/05/2007
13.51
Pagina
30
30 electrolux Something not working
Malfunction
Unsatisfactory washing
results:
The machine vibrates or is
noisy:
The machine makes an
unusual noise
Possible cause
Solution
Too little detergent or
unsuitable detergent has
been used.
● Stubborn stains have not
been treated prior to
washing.
● The correct temperature
was not selected.
● Excessive laundry load.
●
Increase the detergent
quantity or use another one.
●
Use commercial products to
treat the stubborn stains.
The transit bolts and
packing have not been
removed.
● The support feet have not
been adjusted.
● The laundry is not evenly
distributed in the drum.
● Maybe there is very little
laundry in the drum.
● The «Time Manager» level is
not suitable to the soil
degree of your laundry.
●
●
●
●
The machine is fitted with a
type of motor which makes
an unusual noise compared
with other traditional
motors. This new motor
ensures a softer start and
more even distribution of
the laundry in the drum
when spinning, as well as
increased stability of the
machine.
Check if you have selected
the correct temperature.
● Introduce into the drum less
laundry.
●
Check the correct
installation of the appliance.
Check the correct levelling
of the appliance.
● Redistribute the laundry.
●
●
Load more laundry.
●
Select the appropriate
«Time Manager» level.
132973570 EN.qxd
07/05/2007
13.51
Pagina
31
columns and margins electrolux 31
Malfunction
Spinning starts late or the
machine does not spin:
Possible cause
●
Solution
The electronic unbalance
detection device has cut in
because the laundry is not
evenly distributed in the
drum. The laundry is
redistributed by reverse
rotation of the drum. This
may happen several times
before the unbalance
disappears and normal
spinning can resume. If,
after 10 minutes, the
laundry is still not evenly
distributed in the drum, the
machine will not spin. In this
case, redistribute the load
manually and select the
spin programme.
●
Redistribute the laundry.
.
Ser
. No.
.....
Mo
Pro d. .....
d.
No .....
. .....
If you are unable to identify or solve the
problem, contact our service centre.
Before telephoning, make a note of the
model, serial number and purchase date
of your machine: the Service Centre will
require this information.
....
.....
Mod. ..........
Prod. No. ...........
P0042 BD
Ser. No. .........
132973570 EN.qxd
07/05/2007
13.51
Pagina
32
32 electrolux technical data
Technical data
Dimensions
Width
60 cm
Height
82 cm
Depth
54 cm
Electrical connection Voltage
- Overall power - Fuse
Information on the electrical connection is given on
the rating plate on the inner edge of the appliance
door
Water supply pressure
Minimum
0,05 MPa
Maximum
0,8 MPa
Maximum Load
Cotton
Synthetics
Delicates
Wool/Handwash
Silk/Lingerie
Spin Speed
Maximum
5
2.5
2.5
1
1
kg
kg
kg
kg
kg
1400 rpm
132973570 EN.qxd
07/05/2007
13.51
Pagina
33
consumption values electrolux 33
Consumption values
(in litres)
Energy
consumption
(in kWh)
50
1.9
Cottons
Normal 90°
Cottons
Eco
60° (*)
47
0.85
Cottons
+ Prewash 90°
60
2.05
57
1.05
42
0.80
Cottons
Eco
Synthetics
+ Prewash 60°
60°
Synthetics
Normal+Prewash 60°
53
0.9
Delicates
40°
55
0.55
53
0.4
53
0.4
Wool
40°
Handwash
Silk
40°
47
30°
0.2
50
0.4
Spin
-
-
Drain
-
-
Lingerie
Rinses
40°
37
The consumption data shown on this chart is
to be considered purely indicative, as it may
vary depending on the quantity and type of
laundry, on the inlet water temperature and
on the ambient temperature. It refers to the
highest temperature for each wash
programme.
Programme
duration
(in minutes)
For the duration of the programmes, please refer to
the display on the control panel.
Water
consumption
Programme
0.08
(*) The programme «Cottons
Eco
»
(without prewash) at 60°C with a max
load of 5 kg is the reference programme
for the data entered in the energy label,
in compliance with EEC 92/75
standards.
132973570 EN.qxd
07/05/2007
13.51
Pagina
34
34 electrolux installation
Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. Using a spanner unscrew and
remove the rear right bolt. Lay the
machine gently on its back, making
sure that the hoses are not
squashed.
P0015
4. Repeat the operation for the left and
central polythene bags.
P0016
5. Re-fit the bottom panel using the 4
screws supplied with the door
hinges (in the plastic bag) and the
previously removed screw.
P0255
2. Remove the polystyrene base and
take off the bottom panel by
unscrewing the central screw..
P0453
6. Set the machine upright and remove
the two remaining bolts from the
back.
P0457
3. Carefully slide out the right polythene
bag.
132973570 EN.qxd
07/05/2007
13.51
Pagina
35
installation electrolux 35
Any necessary adjustment can be made
with a spanner. Accurate levelling
prevents vibration, noise and
displacement of the machine during
operation. Never place cardboard, wood
or similar materials under the machine to
compensate for any unevenness in the
floor.
P0256
7. Plug the open holes with the plugs
supplied with the instruction booklet.
Water inlet
Do not use the hose from your
previous machine to connect to the
water supply!
1. Connect the hose to a tap with a
3/4” thread.
P0020
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the
machine is not impeded by carpets,
rugs etc.
Check that the machine does not touch
the wall or other kitchen units. Level the
washing machine by raising or lowering
the feet. The feet may be tight to adjust
as they incorporate a self locking nut,
but the machine MUST be level and
stable.
P1088
2. Set the hose correctly by loosening
the ring nut. After positioning the inlet
hose, be sure to tighten the ring nut
again to prevent leaks.
P0021
Always use the hose supplied with the
appliance. The inlet hose must not be
lengthened.
P1051
132973570 EN.qxd
07/05/2007
13.51
Pagina
36
36 electrolux installation
If it is too short and you do not wish to
move the tap, you will have to
purchase a new, longer hose specially
designed for this type of use.
Note !
Place the drain hose into your
standpipe, which should have an
internal diameter of approximately
38mm thus ensuring there is an air
break between the drain hose and
standpipe.
30 cm (12")
38 mm (11.2”)
standpipe
diameter
Installation should comply with
local water authority and building
regulations’ requirements.
1. Into a drainage standpipe.
Firstly form a hook in the end of the
drain hose using the «U» piece
supplied.
“U” piece
supplied
P1199
When discharging into a standpipe
ensure that the top of the standpipe is
no more than 90 cm (35.4'') and no
less than 60 cm (23.6'') above floor
level.
The drain hose may be extended to a
maximum of 4 metres.
3 pin
Max. 90 cm (35.4”)
Water drainage
This appliance is designed to be
permanently plumbed into your home's
drainage system using one of the
following methods.
P1074
Min. 60 cm (23.6”)
The appliance must be connected
to a cold water supply.
A minimum water pressure of 0.05
MPa (0.5 bar) is required for safe
operation of the appliance.
If you cannot make the cold water
connection direct from the rising mains,
you may be able to operate the
appliance from your cold water storage
system.
There should be a minimum distance
of 5.02m (16.5 ft) between the
appliance’s inlet and the bottom of the
water storage tank.
P1039
An additional drain hose and joining
piece is available from your local
Service Force Centre. The joining piece
must have an internal diameter of 18
mm.
If your drain hose looks like this (see
below) you do not require the «U»
piece. Just push the hose firmly into
the standpipe.
132973570 EN.qxd
07/05/2007
13.51
Pagina
37
installation electrolux 37
P1212
2. Onto a sink outlet spigot.
If the outlet spigot has not been used
before, remove any blanking plug that
may be in place.
P1197
Push the drain hose onto the spigot
and secure with a clip if required,
ensure a loop is formed in the drain
hose (see diagram) to prevent waste
from the sink entering the washing
machine.
Loop
P1198
Important!
Before connecting the machine to new
pipework or to pipework that has not
been used for some time, run off a
reasonable amount of water to flush
out any debris that may have collected
in the pipes.
Special conditions
If the floor is carpeted or covered with
crumbly or soft material, insert a rigid
support base under the feet to prevent
noise, vibration or displacement. The
base should protrude a few
centimetres beyond the edges of the
machine.
Warning !
The machine should NOT be placed on
deep pile carpeting.
Note
Please ensure that when the appliance
is installed it is easily accessible for the
engineer in the event of a breakdown.
In the interest of the environment
Washing machines and dishwashers
should be connected to the FOUL
drainage system, the water will then be
taken to a sewage works for treatment
before being discharged safely into a
river.
It is essential that these appliances are
not connected to the surface water
drainage system as this water is
discharged directly into a river or
stream and may cause pollution.
132973570 EN.qxd
07/05/2007
13.51
Pagina
38
38 electrolux installation
If you require any further advice please
contact your local water authority.
Important!
Information on the electrical
connection is given on the rating
plate on the inner edge of the
appliance door.
SINK
TOILET
BATH
WASHING
MACHINE
BIDET
DISHWASHER
RAINWATER
'RUN-OFF'
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
UNTREATED
DISCHARGE
FOUL SEWERS
SEWAGE
TREATMENT
WORKS
TREATED
DISCHARGE
RIVER
RIVER
P0987
Electrical connection
Any electrical work required to install
this appliance should be carried out by
a qualified electrician or competent
person.
The appliance is supplied with a
13amp plug fitted. In the event of
having to change the fuse in the plug
supplied, a 13amp ASTA approved
(BS1363/A) fuse must be used.
Should the plug need to be replaced
for any reason, proceed as described
below.
The wires in the mains lead are
coloured in accordance with the
following code:
Green and Yellow......................- Earth
Blue ..........................................Neutral
Brown ......................................- Live
GREEN & YELLOW
E
13 A
SHOWER
Important!
N
L
BROWN
This appliance must be earthed.
The manufacturer declines any
liability should this safety measure
not be observed.
Before switching on, make sure the
electricity supply voltage is the same as
that indicated on the appliance’s rating
plate.
BLUE
P1041
CORD CLAMP
The wire coloured green and yellow
must be connected to the terminal
marked with the letter «E» or by the
earth symbol
or coloured green
and yellow.
132973570 EN.qxd
07/05/2007
13.51
Pagina
39
installation electrolux 39
The wire coloured blue must be
connected to the terminal marked «N»
or coloured black.
The wire coloured brown must be
connected to the terminal marked «L»
or coloured red.
Upon completion there must be no cut,
or stray strands of wire present and the
cord clamp must be secure over the
outer sheath.
Warning!
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard.
Ensure that the cut off plug is
disposed of safely. Should the
appliance power supply cable need
to be replaced, this MUST be
carried out by our Service Force
Centre.
The power supply cable must be easily
accessible after installing the appliance.
Permanent connection
In the case of permanent connection it
is necessary that you install a double
pole switch between the appliance and
the electricity supply (mains), with a
minimum gap of 3mm between the
switch contacts and of a type suitable
for the required load in compliance
with the current electrical regulations.
The switch must not break the yellow
and green earth cable at any point.
132973570 EN.qxd
07/05/2007
13.51
Pagina
40
40 electrolux building-in
Building-in
This appliance has been designed to
be built into the kitchen furniture.
The recess should have the dimensions shown in picture A.
In this case it is sufficient to screw in the
hinges (1) and the counter-magnet (6)
provided with the appliance, at the right
level (Fig. B).
6
600
4
600
160
165
90
0
49
7
5
P0982
23
B
A
a) Door
The dimensions of the door should be:
- width
595-598 mm
- thickness 16-22 mm
The height (C-Fig. C) depends on the
height of the adjacent furniture's base.
35 Ø 12.5-14 depth
16
-22
416
When installing the appliance into the
kitchen furniture ensure, if possible, the
hoses are placed in either of the two
recesses on the back of the appliance.
This will help to prevent the hoses from
becoming kinked or trapped. Picture
AB.
B
120
416
818
176,5
195
8
2
3
1
54
P0965
1
1
min.
C
570
820 min
596
515
,5
22+1
98
595-5
P0422S
Preparation and assembly of
the door
The machine is originally pre-arranged
for the assembly of a door opening
from right to left.
C
b) Hinges
To mount the hinges it is necessary to
drill two holes (dia. 35 mm, depth 12.514 mm depending on the depth of door
furniture) on the inner side of the door.
The distance between the holes hobs
fixing centres must be 416 mm.
132973570 EN.qxd
07/05/2007
13.51
Pagina
41
building-in electrolux 41
The distance (B) from upper edge of the
door to the centre of the hole depends
on the adjacent furniture's dimensions.
The required dimensions are given in the
picture C.
The hinges will be fixed to the door by
means of screws for wood (2-Fig. B)
supplied with the appliance.
c) Mounting the door
Fix the hinges (1) to the machine by
means of the M5x15 screws (3-Fig. B).
The hinges can be adjusted to compensate for possible uneven thickness of
the door.
To align the door perfectly it is necessary to loosen the screw (3-Fig. B),
adjust the door and tighten the screw
again.
d) Counter-magnet (6)
The appliance is pre-arranged for a
magnetic closure of the door. To enable
a correct operation of this device, it is
necessary to screw the counter-magnet
(6) (steel disk + rubber ring) into the
inner side of the door.
Its position must correspond to the
magnet (4) on the appliance (see picture
D).
6
4
P0984
D
If the door has to be opened from left to
right, invert the position of the plates (7),
the magnet (4) and the plate (5) (Fig. B
and E). Mount the countermagnet (6)
and the hinges (1) as previously
described.
E
6
4
5
7
1
3
P0983
2
Recommendations regarding the
construction and fitting of a base
when the installation requires an
integrated appliance to be raised.
Where the appliance has been raised by
mounting onto a wooden base provided
by the installer. The material used to
construct the base should have a non
slip surface, be water repellent and if
possible be one solid piece.
If it is not possible to use one solid
piece, due to the additional height
required, ensure that any additional
strips of timber are glued and screwed
to the underside of the base (see Fig. F).
132973570 EN.qxd
07/05/2007
13.51
Pagina
42
42 electrolux 42 electrolux
Drill four fixing holes see Fig. G
600-605 mm
490 mm
95 mm
50 mm
G
Top view
Fix the base firmly to the floor using four
appropriate countersunk screws (see
Fig. H).
5 X 25 X 605
600-605
H
A final check for stability should be carried out with the machine on spin with a
load, this will identify the need for any
further fine adjustment to the feet.
A strip of beading approximately 605
mm W, x 5 mm H, x 25 mm D must be
screwed down into the base directly in
front of the machine’s feet, this will provide additional security.
Front edge
Position the base into the recess with its
front edge as far forward as the adjoining plinth line will allow.
The reason for placing the base in
this position is to allow a small strip
of beading to be fitted in front of the
appliance feet.
Hardwood strip
5 mm x 25 mm
With the appliance installed adjust all
four feet ensuring the machine is stable,
and a clearance of approximately 5 mm
is left between the top of the machine
and the underside of the worktop.
490
If required an additional door magnet,
part number 1242394-00/3 and disc,
part number 1242393-00/5 are available from spare parts.
132973570 EN.qxd
07/05/2007
13.51
Pagina
43
environment concerns electrolux 43
Environment concerns
Packaging materials
The materials marked with the symbol
are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by
disposing of them properly in
appropriate collection containers.
Old machine
Use authorised disposal sites for your
old appliance. Help to keep your country
tidy!
The symbol
on the product or on its
packaging indicates that this product
may not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative consequences
for the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product. For more detailed information
about recycling of this product, please
contact your local city office, your
household waste disposal service or the
shop where you purchased the product.
Ecological hints
To save water, energy and to help
protect the environment, we
recommend that you follow these tips:
• Normally soiled laundry may be
washed without prewashing in order
to save detergent, water and time
(the environment is protected too!).
• The machine works more
economically if it is fully loaded.
• With adequate pre-treatment, stains
and limited soiling can be removed;
the laundry can then be washed at a
lower temperature.
• Measure out detergent according to
the water hardness, the degree of
soiling and the quantity of laundry
being washed.
132973570 EN.qxd
07/05/2007
13.51
Pagina
44
44 electrolux guarantee/customer service
Standard guarantee conditions
We, Electrolux, undertake that if within
12 months of the date of the purchase
this Electrolux appliance or any part
thereof is proved to be defective by
reason only of faulty workmanship or
materials, we will, at our option repair
or replace the same FREE OF
CHARGE for labour, materials or
carriage on condition that:
• The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
• The appliance has been used for
normal domestic purposes only, and
in accordance with the manufacturer’s instructions.
• The appliance has not been serviced, maintained, repaired, taken
apart or tampered with by any person not authorised by us.
• Electrolux Service Force Centre must
undertake all service work under this
guarantee.
• Any appliance or defective part replaced shall become the Company’s
property.
• This guarantee is in addition to your
statutory and other legal rights.
Exclusions
• Damage or calls resulting from transportation, improper use or neglect,
the replacement of any light bulbs or
removable parts of glass or plastic.
• Costs incurred for calls to put right
an appliance which is improperly installed or calls to appliances outside
the United Kingdom.
• Appliances found to be in use within
a commercial environment, plus those which are subject to rental agreements.
• Products of Electrolux manufacturer
that are not marketed by Electrolux.
Service and Spare Parts
In the event of your appliance requiring
service, or if you wish to purchase
spare parts, please contact your local
Service Force Centre by telephoning
0870 5 929 929
Your telephone call will be
automatically routed to the Service
Force Centre covering your postcode
area.For the address of your local
Service Force Centre and further
information about Service Force,
please visit the website at:
www.serviceforce.co.uk
Before calling out an engineer, please
ensure you have read the details under
the heading “Something not working”
When you contact the Service Force
Centre you will need to give the following details:
1. Your name, address and postcode.
2. Your telephone number.
3. Clear concise details of the fault.
4. The model and Serial number of the
appliance (found on the rating plate).
5. The purchase date.
Please note a valid purchase receipt or
guarantee documentation is required
for in guarantee service calls.
132973570 EN.qxd
07/05/2007
13.51
Pagina
45
customer service/european guarantee electrolux 45
Customer Care
For general enquiries concerning your
Electrolux appliance, or for further information on Electrolux products please
contact our Customer Care
Department by letter or telephone at
the address below or visit our website
at:
www.electrolux.co.uk
Customer Care Department Electrolux
Major Appliances
Addington Way
Luton
Bedfordshire, LU4 9QQ
Tel: 08705 950 950 (*)
(*) Calls may be recorded for training
purposes
For Customer Service in The Republic
of Ireland please contact us at the
address below:
Electrolux Group (Irl) Ltd
Long Mile Road, Dublin 12,
Republic of Ireland
Tel: + 353 (0)1 4090751
Email: service.eid@electrolux.ie
European Guarantee
This appliance is guaranteed by
Electrolux in each of the countries
listed at the back of this user manual,
for the period specified in the appliance
guarantee or otherwise by law.
If you move from one of these
countries to another of the countries
listed below the appliance guarantee
will move with you subject to the
following qualifications:
• The appliance guarantee starts from
the date you first purchased the
appliance which will be evidenced by
production of a valid purchase
document issued by the seller of the
appliance.
• The appliance guarantee is for the
same period and to the same extent
for labour and parts as exists in your
new country of residence for this
particular model or range of
appliances.
• The appliance guarantee is personal
to the original purchaser of the
appliance and cannot be transferred
to another user.
• The appliance is installed and used in
ac-cordance with instructions issued
by Electrolux and is only used within
the home, i.e. is not used for
commercial purposes.
• The appliance is installed in
accordance with all relevant
regulations in force within your new
country of residence.
The provisions of this European
Guarantee do not affect any of the
rights granted to you by law.
132973570 EN.qxd
07/05/2007
13.51
Pagina
46
46 electrolux service centres
Customer Service Centres
Should you need further assistance please contact your local Customer Service
Centre
www.electrolux.com
à
Albania
Belgique/België/Belgien
Česká republika
Danmark
Deutschland
Eesti
España
France
Great Britain
Hellas
Hrvatska
Ireland
Italia
Latvija
Lituania
Luxembourg
Magyarország
Nederland
Norge
Österreich
Polska
Portugal
Romania
Schweiz-Suisse-Svizzera
Slovenija
Slovensko
Suomi
Sverige
Türkiye
Россия
+35 5 4 261 450
+32 2 363 04 44
+420 2 61 12 61 12
+45 70 11 74 00
+49 180 32 26 622
+37 2 66 50 030
+34 902 11 63 88
www.electrolux.fr
+44 8705 929 929
+30 23 10 56 19 70
+38 51 63 23 338
+353 1 40 90 753
+39 (0) 434 558500
+37 17 84 59 34
+370 5 27 80 609
+35 2 42 43 13 01
+36 1 252 1773
+31 17 24 68 300
+47 81 5 30 222
+43 18 66 400
+48 22 43 47 300
+35 12 14 40 39 39
+40 21 451 20 30
+41 62 88 99 111
+38 61 24 25 731
+421 2 43 33 43 22
www.electrolux.fi
+46 (0)771 76 76 76
+90 21 22 93 10 25
+7 095 937 7837
Rr. Pjeter Bogdani Nr. 7 Tirane
Bergensesteenweg 719, 1502 Lembeek
Budějovická 3, Praha 4, 140 21
Sjællandsgade 2, 7000 Fredericia
Muggenhofer Str. 135, 90429 Nürnberg
Mustamäe tee 24, 10621 Tallinn
Carretera M-300, Km. 29,900 Alcalá de Henares Madrid
Addington Way, Luton, Bedfordshire LU4 9QQ
4, Limnou Str., 54627 Thessaloniki
Slavonska avenija 3, 10000 Zagreb
Longmile Road Dublin 12
C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Kr. Barona iela 130/2, LV-1012, Riga
Verkiu, 2 9, 09108 Vilnius, Lithuania
Rue de Bitbourg, 7, L-1273 Hamm
H-1142 Budapest XIV, Erzsébet királyné útja 87
Vennootsweg 1, 2404 CG - Alphen aan den Rijn
Risløkkvn. 2 , 0508 Oslo
Herziggasse 9, 1230 Wien
ul. Kolejowa 5/7, Warsaw
Quinta da Fonte - Edificio Gonçalves Zarco - Q35 -2774-518 Paço de Arcos
Str. Garii Progresului 2, S4, 040671 RO
Industriestrasse 10, CH-5506 Mägenwil
Tr aška 132, 1000 Ljubljana
Electrolux Slovakia s.r.o., Electrolux Domáce spotrebiče SK, Seberíniho 1, 821 03 Bratislava
Electrolux Service, S:t Göransgatan 143, S-105 45 Stockholm
Tarlabași caddesi no : 35 Taksim Istanbul
129090 Москва, Олимпийский проспект, 16, БЦ “Олимпик”
132973570 EN.qxd
07/05/2007
13.51
Pagina
47
132973570 EN.qxd
07/05/2007
13.52
Pagina
ANC number: 132 973 570 -01-192007
48
Download PDF