Cool Blocks® Band Saw Blade Guides

Cool Blocks Band Saw Blade Guides
®
replace standard metal or plastic guides and enhance cutting performance!
They lubricate the band saw blade but do not make it oily.
Cool Blocks are made of a non-metallic composite ma­te­ri­al–
Graphite Im­preg­nat­ed Phe­nol­ic Lam­i­nate with three syn­thet­ic
dry lubricants.
Metal guide blocks create metal to metal contact, causing heat,
friction, premature blade wear and break­age. Imitation plastic
guides melt and offer no­lubrication.
Cool Blocks blade guides allow blades to run cooler and
last longer with less friction.
They improve the cutting per­for­mance of any blade width, but are
most effective with 1/16″ and 1/8″ wide blades for tight radius work.
Cool Blocks Blade Guides fine tune your band saw!
CB50055BL
For 14″, 16″, and 18″ imported Band Saws using 12mm (.472″) round guides.
Contains: 4 guide blocks 12mm (.472″) diameter x 7/8″
CB50070BL
For Delta 10″ 28-140, 16″ 28-560 3-wheel, and 12″ 28-190 Band Saws.
Contains: 4 guide blocks 5/16″ square x 7/8″
Actual Size photos below
page is 81⁄2″ x 11″
CB50000BL
For Delta 14″ Band
Saws. Contains:
3 guide blocks
1/2″ x 1/2″ x 7/8″
and 1 guide block
1/2″ x 3/8″ x 1-3/4″
CB50010BL
For Sears 12″ Tilting
Table Band Saws, Skil
10″ HD3640, and
Dremel 10″ 1120
Contains:
4 guide blocks
3/8″ x 3/8″ x 7/8″
CB50030BL
For Shopsmith Band
Saws. Contains: 2 guide
blocks 3/8″ x 3/8″ x 7/8″
and 2 guide blocks
3/8″ x 1/4″ x 1-5/8″
CB50080BL
Round guides for 8″ Delta 28-180 & 28-185 and 10″ 3-wheel Benchtop Saws
Including: Delta 28-160 and 28-180 8″ 2-wheel, Sears, K-Mart, Ohio Forge,
ProTech, Builder’s Square.Most saws taking
56 1⁄8″ blades.
Contains:
4 guide blocks
3/16″ diameter x 7/8″
CB50085BL
For 9″ 2 Wheel Band Saws such
as Ryobi, Black & Decker, Sears
Craftsman, ProTech, Trademaster,
and Collins, etc.
Contains: 2 guide blocks
7/32″ square x 7/8″
and 2 guide blocks
7/32″ square x 1-3/8″
CB51010BL
CB50040BL
For old style Sears band
saws using round guides.
Contains: 4 guide blocks
1/4″ diameter x 7/8″
Cool Blocks to cut and customize
to a size to fit your band saw.
Contains 2 guide blocks
1″ x 1″ x 1″
CB50050BL
For most 14″ Band
Saws including Sears
Craftsman 14″, Jet,
Grizzly, Ridgid, etc.
Contains:
4 guide blocks
1/2″ x 1/2″ x 7/8″
Olson Saw Company
16 Stony Hill Rd, Bethel, CT 06801 USA
customerservice@blackstoneind.com • www.olsonsaw.net