FRAMA Rivet Shelf Assembly Guide

Document

ASSEMBLY GUIDE
Rivet Shelf
In this box you will find:
1 &times; Shelf, 1x Wall plate, 4x Wall screws
Necessary tools:
Screwdriver, Drill and Leveling guide
Wall Screws
Level
Screwdriver
Drill
1.
Start by placing the wall plate on the wall. Use the leveler to make sure
the plate is mounted in a straight horizontal angle. Fasten it with the four
screws. Make sure to use the right wall anchors proper for your wall.
2.
Side view of a correct mounted wall plate.
3.
Lower the shelf on the top list of the wallmounted plate.
4.
Side view of a correct mounted shelf.
FRAMA
Fredericiagade 57, 1310 Copenhagen K
+45 3140 6030 framacph.com
">

Hello! I am an AI chatbot specifically trained to assist you with the Rivet Shelf Assembly Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant terminated

Related

Utopia Bathroom Furniture Installation Instructions

Plato Woodwork ICS Installation Instructions Manual

Utopia i-Line Modular series Installation Manual

Thermo Scientific FISHER HAMILTON MAX/WALL Installation Manual

Extron SVEQ 100 Manual

System 180 SitUp CX 45 Assembly Manual

Kimball 2041398 Complete Interworks EQ Assembly Instructions

Dynamic Mounting Slim Down and Out Swivel Mount Assembly & Installation Directions

True GDM Series Technical & Service Manual

ZLINE MWOOTRH30 30 Inch Over the Range 900W Microwave Owners Guide

ZLINE KITCHEN & BATH MWO-OTR-30-BS Over the range microwave 1.5-cu ft Over-the-Range Convection Microwave Installation guide

Friant & Associates Interra Installation Manual