Brady -- ID PAL Tutorial for Wire Marking

Professional Labeling…
with a difference
¾ Labels That Stick
¾ Easy to Use
¾ Saves Time and Money
Hands-on
Training
PRODUCT OVERVIEW
FEATURES/BENEFITS
¾ Prints Brady-quality labels
¾ Non-smearing thermal transfer printing (180 dpi)
¾ Easy-to-peel labels
¾ Lightweight (only 1.2 lbs, with batteries and cartridge)
¾ Fits great in your hand
¾ Job-tough construction (drop tested 4' to concrete)
¾ Easy to see bright red color
¾ Quick, top-load, drop-in cartridge
¾ Built-in industrial cutter
¾ Intuitive keyboard with electrical and datacomm symbols
¾ Special wire marking mode with 10 preset lengths
¾ Prints upper and lower case characters
¾ Multiple line printing
¾ Efficient - just six AA batteries print over 3500 1" labels
¾ Automatic shut-off (10 minutes)
5 FONT SIZES
SYMBOLS
Press
and Character
Prints as
2
ID PAL Hands-on Training
PRODUCT OVERVIEW
KEYPAD
Function
Uppercase
3 LABEL TYPES
WIRE
Press
Built-in leader
for wrapping
wire/cable
and V
Lowercase
and W
New Line
Choose from 10
pre-programmed
lengths:
.75”, 1”, 1.2”, 1.5”,
2”, 2.5”, 3”, 4”, 5”,
6”
Space
Font Size
Delete Character
GENERAL
Clear Legend
and
Feed
and
ACCESSORIES
Prints up to four
lines of text
AC ADAPTER
BANNER
HARDSIDE CARRYING CASE
Prints up to two
lines of text
IMPACT GUARDS
ID PAL Hands-on Training
3
INSTRUCTIONS
POWER
CHANGE LABEL
CARTRIDGE
Batteries
1. Open battery compartment.
1
2. Insert six AA alkaline batteries.
2
4
3. Close battery compartment.
-or1.
2.
A/C Power
Plug in optional A/C Power Supply.
3.
4.
5.
²
Unlock Lever
1
Push Release
Button (on back)
Remove Old
Cartridge
Insert New Cartridge
Lock Lever
2
DISPLAY
Text
Line
123
2 GEN S
Label type/
Wiremarker length
Font size
(S, M, L,
X, XX)
CREATE LABELS
SERIALIZATION
1. Press
1.
Use arrows 3
character.
2.
Press
2. *Press
1
2
for each consecutive serialization.
5
General, Banner,
or Wire/Length
(0.75", 1.0", 1.2",
1.5", 2.0", 2.5", 3.0",
4.0", 5.0", 6.0")
3. *Press
6
4 to place cursor under serial
3
*Use multiple presses to scroll
through selections. FUNCTION +
key scrolls backwards.
WIRE1
1 W.75 S
To produce multiple copies of
the same legend, press PRINT
before SERIAL .
7 pt (S) 10 pt (M), 14 pt (L),
20 pt (X), 28 pt (XX)
4. Enter Text
5. Press
Locking Lever must be
locked to print. See
Change Label Cartridge.
6. Cut Label-slide cut lever up
4
ID PAL Hands-on Training
TUTORIALS
The following examples are shown using a ¾” width label.
TUTORIAL 1: CREATE AND PRINT
A GENERAL LABEL
TUTORIAL 2: CREATE AND PRINT
A 1.5” WIREMARKER LABEL
CX823
SR-J2
01-14W
S0010424
111669
111669
111669
111669
111669
1. Press
1. Press
2. Press
until General appears on the
top line of the display.
3. Press
until 10 Point appears on the top
line of the display.
4. Enter the following text:
(line 1)
(line 2)
(line 3)
(line 4)
Text
Line
2. Press
until Wire 1.5 appears on the
top line of the display.
3. Press
until 14 Point appears on the top
line of the display.
4. Enter the following text: 111669
CX823
SR-J2
01-14W
S0010424
Press
after each line.
For dash (-), press
Line
and 7.
GEN
1
W1.5
L
Label type/
Wiremarker length
CX823
1
111669
Text
Font size
(S, M, L, X,
XX)
M
Label type/
Wiremarker length
Font size
(S, M, L, X,
XX)
5.
Press
.
Locking lever must be locked to print.
6. Cut Label-slide cut lever up.
5.
Press
Locking lever must be locked to print.
6. Cut Label-slide cut lever up.
Place
Your
Label
Here
ID PAL Hands-on Training
Place
Your
Label
Here
5
TUTORIALS
TUTORIAL 3: CREATE AND PRINT
A BANNER LABEL
TUTORIAL 4: CREATE AND PRINT
A SERIALIZED WIREMARKER
LABEL (1”)
YOUR NAME
011412
011412
011412
1. Press
2. Press
until Banner appears on the top
line of the display.
3. Press
until 28 Point appears on the top
line of the display.
4. Enter the following text: YOUR NAME
Text
YOUR NAME
Line
1
5.
1. Press
2. Press
until Wire 1.0 appears on the
top line of the display.
3. Press
until 14 Point appears on the top
line of the display.
4. Enter the following text: 011412
BAN XX
Label type/
Wiremarker length
011413
011413
011413
011412
Text
Line
Font size
(S, M, L, X,
XX)
Press
Locking lever must be locked to print.
1
W1.0
Label type/
Wiremarker length
L
Font size
(S, M, L, X,
XX)
5. Use the back arrow 3 to move the cursor under
the 2.
6. Cut Label-slide cut lever up.
6.
Press
once.
Locking lever must be locked to print.
7. Cut Label-slide cut lever up.
Place Your Label on Your ID PAL Printer
8. Press
again.
9. Cut Label-slide cut lever up.
Place
Your Label
Here
6
Place
Your Label
Here
ID PAL Hands-on Training