Liebherr SFNsd 5227 Plus Freestanding freezer Assembly and installation instructions
Liebherr SFNsd 5227 Plus is a freestanding freezer with ample storage capacity, ideal for families or individuals who need to store large quantities of frozen food. It features adjustable shelves and drawers, allowing you to customize the interior to suit your needs. The freezer also includes a variety of features designed to maximize efficiency and minimize energy consumption.
PDF
Download
Document
Advertisement
Advertisement
Installation Guide Quality, Design and Innovation home.liebherr.com/fridge-manuals General safety instructions Contents Symbol Explanation 1 General safety instructions.................................. 2 2 2.1 2.2 2.3 2.4 Installation conditions.......................................... Location......................................................................... Building the appliance into kitchen units................ Installing multiple appliances.................................... Mains connection......................................................... 3 3 3 4 4 3 Installation dimensions........................................ 5 4 Ventilation requirements...................................... 5 5 Transporting appliance......................................... 5 6 Unpacking the appliance...................................... 5 7 Mounting wall spacers.......................................... 5 8 Setting up the appliance....................................... 5 9 Setting up the appliance so that it is level........... 6 1 General safety instructions 10 After setting up..................................................... 6 11 Disposing of packaging......................................... 6 - Please keep this assembly manual in a safe 12 12.1 12.2 12.3 12.4 12.5 12.6 12.7 Door hinge change................................................ 6 Removing the door....................................................... 6 Moving the upper bearing parts to the other side. 7 Moving the lower bearing parts to the other side.. 8 Moving the door bearing parts to the other side.... 9 Fitting the door............................................................. 9 Aligning the door.......................................................... 10 Fitting the covers......................................................... 10 13 Connecting device................................................. 10 The manufacturer is continually working on the further development of all types and models. Please be aware that we reserve the right to make changes to the shape, equip‐ ment and technology. Symbol Explanation Read instructions Please read the information in these instruc‐ tions carefully to understand all of the benefits of your new appliance. Additional information on the Internet The digital manual with additional informa‐ tion and in other languages can be found via the QR code on the front of the manual or by entering the service number at home.liebherr.com/fridge-manuals. The service number can be found on the serial tag: Differences These instructions apply to a range of models, so differences are possible. Sections that apply to certain models only are marked with an asterisk (*). Instructions and results Instructions are marked with a Results are marked with a . . Videos Videos about the appliances are available on the YouTube channels of Liebherr-Hausgeräte. place so you can refer back to it at any time. - If you pass the appliance on, please hand this assembly manual to the next user. - Read this assembly manual carefully before installation and use to ensure safe and correct use of the appliance. Follow the instructions, safety instructions and warning messages included at all times. They are important for ensuring you can operate and install the appliance safely and without any problems. - First read the general safety instructions in the “General safety instructions” section of the operating instructions, which accom‐ pany these installation instructions, and follow them. If you cannot find the operating instructions, you can down‐ load the operating instructions from the internet by entering the service number at home.liebherr.com/fridge-manuals. The service number can be found on the serial tag: - Observe the warning messages and other Fig. Example illustration Check appliance Check all parts for transport damage. If you have any complaints, please contact your agent or customer service. 2 detailed information in the other sections when installing the appliance: DANGER identifies a situation involving direct danger which, if not obvi‐ ated, may result in death or severe bodily injury. WARNING identifies a dangerous situation which, if not obviated, may result in death or severe bodily injury. * Depending on model and options Installation conditions CAUTION identifies a dangerous situation which, if not obviated, may result in minor or medium bodily injury. NOTICE identifies a dangerous situation which, if not obviated, may result in damage to property. Note identifies useful instructions and tips. 2 Installation conditions - If the appliance is placed directly next to an oven, the energy consumption may increase slightly. This is dependent on the service life and usage intensity of the oven. - Install the appliance with the rear panel up against the wall and always use the supplied wall spacers (see below). 2.2 Building the appliance into kitchen units You can install kitchen cabinets around the appliance. WARNING Fire hazard due to dampness! If live parts or the mains lead become damp this may cause short circuits. u The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions. Intended use - Install and use the appliance in indoor spaces only. 2.1 Location WARNING Leaking coolant and oil! Fire. The coolant contained in the appliance is eco-friendly, but also flammable. The oil contained in the appliance is flammable. Escaping coolant and oil can ignite if the concentration is high enough and in contact with an external heat source. u Do not damage the pipelines of the coolant circuit and the compressor. - The best place for installation is a dry and well ventilated room. - If the appliance is installed in a very humid environment, condensation can build up on the outside of the unit. Always ensure good airlow and ventilation in the installa‐ tion location. - The more refrigerant there is in the appliance, the larger the space that it is installed in must be. If the space is too small, any leak may create a flammable mixture of gas and air. For every 8 g of refrigerant, the installation space must be at least 1 m3 . Information regarding the coolant can be found on the serial tag inside the appli‐ ance. 2.1.1 Supporting floor - The floor of the installation site must be horizontal and even. - The surface supporting the appliance must be at the same level as the surrounding floor. 2.1.2 Positioning - Do not place the appliance in direct sunlight or near radi‐ ators or similar sources of heat. - You can place the appliance directly next to an oven. * Depending on model and options Fig. 1 (1) Top cupboard (2) Appliance (3) Kitchen cabinet (4) Wall (B) Door depth (C) Ventilation cross section (D) Distance to the back of the appliance (E) Distance to the side of the appliance (A) Appliance depth You can place the appliance directly beside the kitchen cabinet Fig. 1 (3). There must be a ventilation shaft at the depth Fig. 1 (D) of the back of the top cupboard over the entire width of the top cupboard. The ventilation cross-section Fig. 1 (C) must be maintained under the ceiling. If the appliance is set up with the hinges next to a wall Fig. 1 (4), the distance between the appliance and the wall must be at least 13 mm . If the appliance is set up with the hinges next to a wall Fig. 1 (4), the distance between the appliance and the wall must be at least 20 mm . 3 Installation conditions In order to be able to fully open the door, the appliance must protrude by the depth of the door Fig. 1 (B) from the front of the kitchen cabinet. The appliance may protrude further depending on the depth of the kitchen cabinets Fig. 1 (3) and whether wall spacers are used. Appliances without handle / with recessed grip: A 675 mm x B 75 mm C Min. 300 cm2 D Min. 50 mm E Min. 13 mm x The use of wall spacers increases the dimensions by 15 mm (see 7 Mounting wall spacers) . Model Installation method Models without side wall heating Next to each other: Install with gap A of 70 mm between the appliances. If you do not comply with this gap, condensa‐ tion will form on the side walls between the appliances. Ensure that the following conditions are met: - Recess dimensions are adhered to . - Ventilation requirements are complied with (see 4 Venti‐ lation requirements) . 2.3 Installing multiple appliances The appliances have been developed for different installa‐ tion methods. If you wish to install several appliances next to each other or on top of each other, ensure that the following requirements are met: q Only install appliances next to or on top of each other if they have been developed for this. q Observe notices and the following table. NOTICE Risk of damage due to condensate! u Do not place the appliance directly next to another cooling/refrigeration unit. Model Installation method All models Standalone Models Side-by-Side (SBS) with a model designa‐ tion starting with S.... 4 On an exterior wall: Install with gap A as with installation next to each other. If you do not comply with this gap, condensa‐ tion may form on the appliance’s side wall. Models and their installation method Assemble the appliances according to the separate installa‐ tion instructions. 2.4 Mains connection WARNING Danger of fire due to incorrect positioning! If the mains cable or plug touches the back of the appli‐ ance, the vibration can damage the mains cable or the plug resulting in a short circuit. u Make sure the mains cable is not trapped under the appli‐ ance when you position the appliance. u Stand the appliance so that it is not touched by connec‐ tors or main cables. u Do not connect any appliances to sockets in the area of the back of the appliance. u Do not place and operate multi-sockets/power distribu‐ tors and other electronic devices (such as halogen trans‐ formers) at the back of the appliances. * Depending on model and options Installation dimensions u Remove all materials from the back or the side walls of the appliance that may prevent proper installation or ventilation. u Remove all protective films from the appliance. Do not use sharp or pointed objects for this. 3 Installation dimensions 7 Mounting wall spacers With wall spacers, your device achieves the declared energy consumption and no condensation forms in high ambient humidity. The device is fully functional without the spacer brackets, but its energy consumption will be slightly higher. If you insert the wall spacers, then the device depth increases by approx. 15 mm. Fig. 2 h (mm) a (mm) b (mm) c (mm) d (mm) SFNsd 52.. 1855 597 675x 609 1217x u Appliance with enclosed wall spacers: Insert the wall spacers on the rear of the appliance at the bottom left and right. 8 Setting up the appliance x This dimension increases by 15 mm on devices with attached wall spacer brackets. (see 7 Mounting wall spacers) 4 Ventilation requirements CAUTION Risk of injury due to heavy appliance! u Have two people transport the appliance to its installa‐ tion site. NOTICE Danger of overheating due to insufficient air ventilation! The compressor may be damaged if there is insufficient air ventilation. u Take care to ensure adequate air ventilation. u Observe the ventilation requirements. If the appliance is integrated into a fitted kitchen, the following ventilation requirements must be adhered to: - As a rule, the larger the ventilation space the more effi‐ ciently the appliance can run. 5 Transporting appliance Note when transporting the appliance: u Transport the appliance upright. u Use two people to transport the appliance. During first use: u Transport the appliance packaged. When transporting appliances after initial commissioning (e. g. moving or cleaning): u Empty the appliance. u Secure the door against unintentional opening. 6 Unpacking the appliance Before you connect the appliance, report any damage imme‐ diately to the delivery company. u Check the appliance and the packaging for damage during transport. Contact the supplier immediately if you suspect any level of damage. * Depending on model and options WARNING Risk of fire due to short circuit! u When you set the appliance up: do not kink, jam or damage the mains cable. u The appliance must not be operated with a defective mains cable. WARNING Danger of injury and damage due to the appliance being unstable! The appliance can topple over. u Secure the appliance as described in the instructions. WARNING Fire hazard and danger of damage! u Do not place appliances emitting heat e.g. microwaves, toasters etc. on the appliance! Ensure that the following conditions are met: q Only move the device when it is not loaded. q Only install the appliance with help. u Remove the mains cable from the package. u Plug the mains cable’s IEC socket completely into the appliance plug on the back of the appliance. Ensure that the IEC socket is tight. u Use a cord to lay the mains plug to a freely accessible socket if required. 5 Setting up the appliance so that it is level 9 Setting up the appliance so that it is level 12 Door hinge change Fig. 3 u Unscrew the adjustable feet Fig. 3 (A) using the enclosed open-end spanner and a spirit level until the appliance is firmly aligned and level. Fig. 4 CAUTION Risk of injury or damage from the appliance tipping or the door falling open! If the additional adjustable foot on the base support is not correctly positioned on the floor, there is a risk of the door falling open or the appliance tipping. This can lead to injury or property damage. u Unscrew the additional adjustable foot on the swap bearing block as instructed. u Unscrew the adjustable foot Fig. 3 (B) on the swap bearing block with the enclosed open-end spanner until it rests on the floor. u Turn the adjustable foot Fig. 3 (B) 90° further. w The appliance is aligned. 10 After setting up u Take off the protective film from the exterior of the appli‐ ance. u Take off the protective film from the stainless steel rear panel. u Remove all transport safety components. u Clean the appliance. (see operating instructions) u Note the type (model, number), appliance designation, appliance/serial number, purchase date and dealer’s address. Tools WARNING Danger of injury due to door falling out! If the bearing parts are not screwed on tightly enough, the door may fall out. This can result in serious injuries. In addition, the door may not close with the result that the appliance does not cool properly. u Screw on the bearing brackets/bearing pins tightly with 4 Nm. u Check all screws and retighten them if necessary. These sections apply for appliances without a soft stop mechanism: q For appliances without a soft stop mechanism q For all appliances NOTICE Risk of condensation damage for Side-by-Side appliances! Certain appliances can be set up as Side-by-Side combina‐ tions (two appliances next to each other). If your appliance is a Side-by-Side (SBS) appliance: u Set up the SBS combination in accordance with the enclosed document. If the positioning of the devices is stipulated: u Do not change the door hinges over. 11 Disposing of packaging WARNING Danger of suffocation due to packing material and plastic film! u Do not allow children to play with packing material. The packaging is made of recyclable materials: - corrugated board/cardboard - expanded polystyrene parts - polythene bags and sheets - polypropylene straps - nailed wooden frame with polyethylene panel* u Take the packaging material to an official collecting point. 6 Fig. 5 Remember the reading direction. 12.1 Removing the door Note u Remove any food from the door racks before removing the door, so that no food falls out. For appliances without a soft stop: * Depending on model and options Door hinge change Fig. 6 u Open the door. NOTICE Risk of damage! If the door seal is damaged, the door may fail to close prop‐ erly and the cooling will be inadequate. u Do not damage the door seal with the screwdriver! u Remove the outer cover. Fig. 6 (1) u Disengage and release the bearing bracket cover. Remove the bearing bracket cover. Fig. 6 (2) u Unlatch the panel with a slotted screwdriver and swivel it to one side. Fig. 6 (3) For all appliances: Fig. 7 CAUTION Risk of injury if the door tips! u Take good hold of the door. u Set down the door carefully. u Carefully remove the protective cover. Fig. 7 (1) u Undo the bolt a little with a T15 screwdriver. Fig. 7 (2) u Hold the door and remove the bolts with your fingers. Fig. 7 (3) u Pull the bearing bush out of the guide. Insert from the other side and latch into place. Fig. 7 (4) u Lift the door and place it to one side. u Carefully lift the plugs out of the door bearing bush with a slotted screwdriver and pull them out. Fig. 7 (5) 12.2 Moving the upper bearing parts to the other side For all appliances: * Depending on model and options 7 Door hinge change 12.3 Moving the lower bearing parts to the other side For all appliances: Fig. 8 u Remove both screws with a T20 screwdriver. u Lift up and remove the bearing bracket. Fig. 10 u Lift the bearing pin completely upward and pull it out. Fig. 10 (1) u Take out the screws with a T20 screwdriver and take off the bearing bracket. Fig. 10 (2) For appliances without a soft stop: Fig. 11 u Loosen the screw using a T25 screwdriver. Fig. 11 (1) u Lift the door closing aid and turn it 90° to the right in the hole. Fig. 11 (2) u Tighten the screw using a T25 screwdriver. Fig. 11 (3) For all appliances: Fig. 9 u Take off the cover from above to the front. Fig. 9 (1) u Rotate the cover 180° and clip onto the other side from the right. Fig. 9 (2) u Latch the cover into place. Fig. 9 (3) u Position the upper bearing bracket. Fig. 9 (4) u Insert the screw with a T20 screwdriver and tighten it. Fig. 9 (5) u Insert the screw with a T20 screwdriver and tighten it. Fig. 9 (6) Fig. 12 u Remove the cover. Fig. 12 (1) 8 * Depending on model and options Door hinge change Fig. 13 u Unscrew the metal plate, move it to the other side and screw it on again. Fig. 13 (1) Fig. 16 u The bottom side of door faces upwards: Turn the door. u Push the lug downwards with a slotted screwdriver. Fig. 16 (1) u Pull the door latch out of the guide. Fig. 16 (2) u Push the door latch into the guide on the other side. Fig. 16 (3) u The upper side of door faces upwards: Turn the door. 12.5 Fitting the door For all appliances: Fig. 14 u Place the bearing bracket on the other side and screw it on with a T20 screwdriver. Start with screw 2 at the bottom in the middle. Fig. 14 (2) u Screw in screws 3 and 4 tightly. Fig. 14 (3,4) u Insert the bearing pin completely. Make sure that the latching lug is pointing to the rear. Fig. 14 (5) Fig. 15 u Put the cover back on the other side. Fig. 15 (1) 12.4 Moving the door bearing parts to the other side For appliances without a soft stop: * Depending on model and options Fig. 17 u Place the door on the lower bearing pins. u Align the top of the door with opening in the bearing bracket. Fig. 17 (1) u Insert the bolt and tighten with a T15 screwdriver. Fig. 17 (2) 9 Connecting device u Fit the protective cover to protect the door: Insert the protective cover and check that it is flush to the door. If not, insert the bolt fully. Fig. 17 (3) u Insert the plugs. Fig. 17 (4) 13 Connecting device 12.6 Aligning the door Danger of fire due to incorrect connection! Burns. Damage to the appliance. u Do not use an extension cable. u Do not use distributor blocks. For all appliances: WARNING Danger of injury due to door falling out! If the bearing parts are not screwed on tightly enough, the door may fall out. This can result in serious injuries. In addition, the door may not close with the result that the appliance does not cool properly. u Screw the bearing brackets on firmly with 4 Nm. u Check all screws and retighten them if necessary. u Align the doors flush with the appliance housing using the two slots in the bearing bracket if needed. To do this undo the middle screw in the bottom bearing bracket with the T20 tool supplied. Undo the remaining screws a little with the T20 tool or with a T20 screwdriver and align using the slotted holes. u Prop up the door: Take off the adjustable foot on the bearing bracket using the open-ended wrench SW10 until it comes into contact with the floor, then turn an addi‐ tional 90°. 12.7 Fitting the covers For appliances without a soft stop: WARNING NOTICE Danger of damage to incorrect connection! Damage to the appliance. u Do not connect the appliance to a stand-alone inverter, e.g. solar power systems and petrol generators. Note Only use the supplied mains cable. u A longer mains cable can be ordered from Customer Service. Ensure that the following conditions are met: - The type of current and voltage at the installation site match the information on the serial tag . - The socket is earthed according to the regulations and fused. - The fuse tripping current is between 10 and 16 A. - The socket is easily accessible. - The socket is not located behind the appliance but in areas a or b (a, b, c). u Check the electrical connection. u Insert the appliance plug (G) into the back of the appli‐ ance. Ensure that they latch into place. u Connect the mains plug to the power supply. w The Liebherr logo appears on the screen. w The display switches to the standby symbol. Fig. 18 The door is open 90°. u Position the bearing bracket and latch it in place. If necessary push it apart carefully. Fig. 18 (1) u Position the panel on the side and latch into place. Fig. 18 (2) Fig. 19 u Slide on the outer cover. Fig. 19 (1) u Close the upper door. Fig. 19 (2) 10 * Depending on model and options Connecting device * Depending on model and options 11 home.liebherr.com/fridge-manuals freezer Issue date: 20240920 Part number index: 7088543-00 Liebherr-Hausgeräte GmbH Memminger Straße 77-79 88416 Ochsenhausen Deutschland ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Freestanding freezer
- Adjustable shelves and drawers
- Energy efficient
- Ample storage capacity
- Quiet operation
Frequently asked questions
Refer to the installation instructions in the provided document for detailed steps on installing the freezer. Make sure to follow the guidelines regarding ventilation requirements and mains connection.
Ensure adequate ventilation for the freezer by providing enough space around the unit. The document provides specific dimensions regarding the ventilation cross-section and distances from walls and cabinets.
The document provides step-by-step instructions on how to change the door hinges. It includes diagrams and explanations of how to remove, move, and refit the door and its bearing parts.