Jordan Valve Mk 2000 spec

Jordan Valve Mk 2000 spec
Pneumatic Control Valves
Mark 2000 Series
Angle Seat On/Off Control Valves
The Mark 2000 is an externally piloted angle-seat
valve with self-adjusting packing gland, intermediate relief and wiper. The angle-seat construction
of the body makes possible extremely high flow
rates, particularly in comparison to conventional
globe valves.
The compact size and light weight design makes
this valve ideal for OEM machinery and other applications where space is at a premium.
Features
• Actuator can be rotated 360°
• Fast response
• Maintenance-free actuator with long service
life
• Self-adjusting packing glands
• Lower life-cycle costs
• Compact design with high flow rates
• Low air consumption due to small actuator
volume
• Water-hammer free design
• Stainless Steel body trim for wide variety of
media
• Compact space saving actuator design
• Position indicator (open/close) standard
• Optional solenoid available
Applications & Industries
•
•
•
•
•
•
•
•
•
•
•
•
Dyeing and washing machines
KEG washing and filling machines
Test benches, presses
Paint spray systems
Textile
Brewing
Automotive
Automotive/Chemical
Gas turbine test benches
Aerospace
"Clean in place" systems
Concrete and cement industry
Jordan Valve a division of Richards Industries
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.jordanvalve.com
Mark 2000 Angle-Seat On/Off Control Valves
All trim components and body are stainless steel
for maximum corrosion resistance. However, the
MK2000 is economical enough to use on general
utility services as well. Whether steam, water, air
or chemicals and process gases, the Mark 2000
provides unparalleled flexibility for on/off service.
Mark 2000 Angle-Seat Valves
Specifications
Description: In the "NCA" configuration, the medium enters the MK2000 under the seat such that
the valve closes against the pressure of the flow.
This 'closing against the flow' eliminates water
hammer damage associated with liquid service
(or condensate hammer in steam lines), but is also
ideally suited for gas service as well.
The "NCW" configuration 'closes with flow' and is
primarily used on gas service. This option is used
more frequently in larger valves as the pressure
drop capability in the "NCA" configuration lowers.
• The Mark 2000 is normally closed, with flow
under the seat. When air pressure is supplied
to the actuator (i.e. when the solenoid is energized open), the piston is driven up to open
the valve.
• When the solenoid is closed and the actuator is vented, the springs push the disc to the
seat to close.
Sizes: 1/2" (DN15) through 2" (DN50)
Body Material: 316 SST
Trim Material: 304 SST (stem)
End Connection: NPT (consult factory for other
options)
Seat Material: PTFE
Packing Material: Spring loaded, PTFE V-Rings
Actuator Housing:
• Nickel plated brass – 50 mm
• Aluminum – 80 mm
Actuator Supply Material: Air, neutral gas, clear neutral liquids
Actuator Supply Pressure: 29 - 145 psi (2 - 10 bar)
* Differential pressure based on 87 psi pressure (6 bar)
Pressure Range: 0 - 362 psi (max (0 - 25 bar)
Temperature Media: -40° to +397°F (-40°C to +200°C)
Differential Pressure Chart – PSI (BAR)
Ordering Schematic
2K2050SSE5NCA
2K2075SSE6NCA
2K2100SSE6NCA
2K2125SSE6NCA
2K2150E6NCA
2K2150A8NCW
2K2200E6NCA
2K2200A8NCW
Size
1/2"
3/4"
1"
1-1/4"
1-1/2"
1-1/2"
2"
2"
NCA
232 (16)
290 (20)
145 (10)
101 (7)
87 (6)
X
43 (3)
X
NCW
X
X
X
X
X
290 (20)
X
174 (12)
X – Not currently available, contact factory
Solenoid Options
Model No.
2K2-16913
2K2-16914
2K2-16915
2K2-16916
Solenoid Options: 125VAC or
24VDC available for mounting to
50mm or 80mm actuators.
For 50mm, select 1/8" size
For 80mm, select 1/4" size
These solenoids are 3/2 way
valves which enable air supply
to completely exhaust from the
actuator to allow quick movement of the main valve.
Size
1/8"
1/4"
1/8"
1/4"
Voltage
125VAC
125VAC
24VDC
24VDC
Add "N" to model number to get solenoid and mounting nipple. For example 2K2-16913N.
-2-
Mark 2000 Angle-Seat Valves
Bill of Materials
25
8
24
23
21
4
18
11
17
19
20
9
13
10
12
22
2
15
14
3
5
7
16
1
Part Number
Description
Part Number
Description
1
Body
14
Packing Wiper
2
Bonnet
15
V-Ring Packing
3
Stem
16
Seat Retaining Bolt
4
Piston
17
Actuator Stem Seal
5
Valve Disc
18
Actuator Piston Seal
6
N/A
19
O-Ring
7
Seat
20
Clip Ring
8
Actuator Housing
21
Stem Nut
9
Flange
22
Body Bonnet Gasket
10
Disc
23
Spring
11
Bushing
24
Positive Indicator
12
Packing Spring
25
Indicator Cover
13
Packing Ring
-3-
MK2000/0808/10K/AB
Mark 2000 Angle-Seat Valves
Dimensions
• Actuator – 50mm
D
Dimensions (inches)
Valve Size
K
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
50
°
G 1/4" – 80mm
G 1/8" – 50mm
A
5.31
5.71
5.90
6.10
6.30
6.89
D
2.44
2.44
2.44
2.44
2.44
2.44
K
5.51
5.51
5.71
5.83
6.10
6.38
L
2.60
2.95
3.54
4.33
4.72
5.91
T
0.47
0.51
0.59
0.67
0.75
0.83
Dimensions (metric)
Valve Size
A
135
145
150
155
160
175
DN15
DN20
DN25
DN32
DN40
DN50
D
62
62
62
62
62
62
K
140
140
145
148
155
162
L
65
75
90
110
120
150
T
12
13
15
17
19
21
Weight
lbs
2.9
3.1
3.5
4.9
5.5
7.7
Weight
kgs
1,3
1,4
1,6
2,2
2,5
3,5
A
• Actuator – 80mm
Dimensions (inches)
L
Valve Size
A
8.27
9.06
1-1/2"
2"
D
3.70
3.70
K
7.68
8.07
L
4.72
5.91
T
0.75
0.83
Dimensions (metric)
Valve Size
A
210
230
DN40
DN50
D
94
94
K
195
205
L
120
150
T
19
21
Weight
lbs
7.5
10.2
Weight
kgs
3,4
4,6
Ordering Schematic
1
2
3
4
5
6
7
1
2K
Model
Standard
4
SS
Material
Stainless Steel
2
2
Series
2000
5
E
A1
Actuator Material
Electroless Nickel Plated Brass
Aluminum
3
SS
075
100
125
150
200
Size
1/2" (DN15)
3/4" (DN20)
1" (DN25)
1-1/4" (DN32)
1-1/2" (DN40)
2" (DN50)
6
52
6
83
Actuator Size
50mm
50mm – 2 springs
80mm
7
NCA
NCW4
Function
Normally Closed Against Flow
Normally Closed With Flow
1 Only available with actuator size 8
2 Only available with 1/2" valve
3 Only available with 1-1/2" & 2" sizes, NCW
4 Only available with 1-1/2" & 2" sizes w/ 80mm actuator Jordan Valve a division of Richards Industries
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.jordanvalve.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement