Cino FuzzyScan FBC6000 Series Quick start manual

© Copyright Cino Group

© Copyright PC Worth Int’l Co., Ltd

PC Worth makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of merchantability and fitness for any particular purpose. PC Worth shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this publication. This publication contains proprietary information that is protected by copyright. All rights are reserved. No part of this publication may be photocopied, reproduced or translated into any language, in any forms, in an electronic retrieval system or otherwise, without prior written permission of PC Worth.

Warranty

PC Worth warrants its products against defects in workmanship and materials from the date of shipment, provided that the product is operated under normal and proper conditions. The warranty provisions and durations are furnished by different warranty programs. The above warranty does not apply to any product which has been (i) misused; (ii) damaged by accident or negligence; (iii) modified or altered by the purchaser or other party; (iv) repaired or tampered by unauthorized representatives; (v) operated or stored beyond the specified operational and environmental parameters; (vi) applied software, accessories or parts are not supplied by PC Worth; (vii) damaged by circumstances out of PC Worth’s control, such as, but not limited to, lightning or fluctuation in electrical power. Any defective product must follow the warranty program and RMA procedures to return PC Worth for inspection.

Regulatory

LED Eye Safety

FCC part 15B

EN55022, EN55024, EN61000-3-2, EN61000-3-3

CNS13438

Industry Canada ICES-003

IEC60825-1

1

Getting familiar with your FuzzyScan

Thank you for choosing Cino FuzzyScan Imager. The all FuzzyScan Imagers deliver world-class performance for a broad range of market applications to unleash your productivity.

This document provides an easy reference for installing and operating

FuzzyScan Imagers. A complete documentation for FuzzyScan Imagers is provided by the FuzzyScan User’s Guide available on the Internet at http://www.cino.com.tw

F400 Series

F700 Series

FBC6000 Series

1. Power Indicator

2. Status Indicator

3. Trigger

4. Scan Window

5. Beeper

6. Cable Release Hole

2

Connecting/Disconnecting cable

FuzzyScan imagers provide PS/2(DOS/V) Keyboard Wedge, RS-232 Serial,

USB interfaces capability. To disconnect the cable, please straighten one end of a paper clip, then insert it into the cable release hole and press in. After that, you can release the cable and pull the cable out easily.

F400 Series

F700 Series

FBC6000 Series

3

Connecting host interface

USB

FuzzyScan imagers have capability to connect different host devices by

PS/2(DOS/V) Keyboard Wedge, RS-232 Serial and USB interfaces. Please choose one of the interface cables to connect your host device by referring to the illustrations below.

PS/2(DOS/V) Keyboard Wedge

RS232 Serial

4

Keyboard function code table

No. ANSI ASCII Key Function No.

ANSI ASCII Key Function

22

23

SYN

ETB

16H INS (Insert) (Edit)

17H DEL (Delete) (Edit)

26

27

SUB

ESC

1AH PAGE UP (Edit)

1BH PAGE DOWN (Edit)

HEX/ASCII reference table

A

B

C

D

6

7

8

9

E

F

L

H

0

1

2

3

4

5

0 1 2 3 4 5 6 7

NUL DLE SPACE 0 @ P ` p

SOH DC1 ! 1 A Q a q

STX DC2 " 2 B R b r

ETX DC3 # 3 C S c s

EOT DC4 $ 4 D T d t

ENQ NAK % 5 E U e u

ACK SYN & 6 F V f v

BEL ETB ' 7 G W g w

BS CAN ( 8 H X h x

HT EM ) 9 I Y i y

LF SUB * : J Z j z

FF FS , < L \ l |

CR GS - = M ] m }

SO RS . > N ^ n ~

SI US / ? O _ o DEL

: High Byte of HEX Value : Low Byte of HEX Value

5

Host interface quick set

PS/2 (DOS/V) Keyboard Wedge

Keyboard Replacement

USB HID Interface

USB COM Interface

Operation mode quick set

RS232 Serial Interface

Low Power Mode

Trigger Mode

Presentation Mode

Alternative Mode

Flash Mode

Force Mode

Toggle Mode

6

Diagnostic Mode

Keyboard interface control

Command

Keyboard Layout

Record Suffix

Preamble

Parameter Selection

USA ◆

France

Germany

United Kingdom-UK

Canadian French

Spain

Sweden/Finland

Portugal

Norway

Latin America

Italy

Netherlands

Denmark

Belgium

Switzerland-Germany

Iceland

Japan

Universal

None

RETURN ◆

TAB

SPACE

None ◆

1-15 characters

ENTER

User define character

Postamble None ◆

1-15 characters

Character Frame Control None ◆

1-99 msec.

Intermessage Delay None ◆

1-99 (x5) msec.

Intercharacter Delay None ◆

1-99 (x5) msec.

Interfunction Delay

Caps Lock Control

None ◆

1-99 (x5) msec.

“Caps Lock Off” State ◆

“Caps Lock On” State

Auto Detect

Function Key Emulation Enable ASCII 00-31 as KB function code output ◆

Enable ASCII 00-31 as Ctrl-xx output

Key Pad Emulation Disable key pad emulation ◆

Enable numeric output as key pad output

Upper/Lower Case Normal case ◆

Inverse case

Upper case

Lower case

7

FIN

(2 digits)

FIN

(2 digits)

FIN

(2 digits)

FIN

(2 digits)

0

1

2

0

1

Option Code

03

04

05

06

00

01

02

07

08

12

13

14

15

09

10

11

16

99

0

1

2

3

4

5

FIN

[00-7F], [FIN]

FIN

[00-7F], [FIN]

0

1

2

3

0

1

Serial interface control

Command

STX/ETX Control

Parameter Selection

Disable STX/ETX transmission ◆

Enable STX/ETX transmission

Record Suffix

Preamble

None

CR ◆

LF

CRLF

None

◆

1-15 characters

Postamble None ◆

1-15 characters

Handshaking Protocol

Intermessage Delay

None ◆

RTS/CTS

ACK/ NAK

Xon/Xoff

None ◆

1-99 (x5) msec.

Intercharacter Delay None ◆

1-99 (x5) msec.

Interfunction Delay

Baud Rate (BPS)

Data Frame

Time Out Control

None ◆

1-99 (x5) msec.

38.4K

19.2K BPS

9600 BPS ◆

4800 BPS

8, None,1 ◆

8, Odd, 1

8, Even, 1

8, Space, 1

8, Mark, 1

8, None, 2

7, Odd, 1

7, Even, 1

None

200 msec.

500 msec. ◆

TAB

SPACE

User define character

2400 BPS

1200 BPS

600 BPS

300 BPS

7, Space, 1

7, Mark, 1

7, None, 2

7, Odd, 2

7, Even, 2

7, Space, 2

7, Mark, 2

1 sec.

2 sec.

5 sec.

User define value (sec.)

3

4

5

6

7

0

1

2

0

1

2

0

1

2

3

B

C

D

E

8

9

A

3

4

5

6

4

5

6

7

0

1

2

3

FIN

(2 digits)

FIN

(2 digits)

FIN

(2 digits)

Option Code

0

1

0

1

2

3

FIN

[00-7F], [FIN]

4

5

6

FIN

[00-7F], [FIN]

8

Operation and output control

Command

Operation Mode

Inverse Reading

Parameter Selection

Low power mode (Low power triggering)

Trigger mode/Serial mode (External triggering) ◆

Presentation mode (Auto Detection)

Alternative mode (Periodic power off)

Flash mode (Pulse driven reading)

Force mode (Continued power on)

Toggle mode (Repeat reading)

Diagnostic mode (Test reading)

Disable ◆

Enable

Redundancy None

1 time ◆

2 times

3 times

4 times

5 times

To prevent potential miss reading.

Power On Indicator

Vibrator

Symbology ID Transmission Disable all symbology ID ◆

Enable prefix CINO symbology ID

Enable suffix CINO symbology ID

Enable both prefix and suffix CINO symbology ID

Enable prefix AIM symbology ID

Enable suffix AIM symbology ID

Enable both prefix and suffix AIM symbology ID

Dollar Sign Output

Disable ◆

Enable

Unavailable for FBC6000 series.

Good Read Delay

Reread Delay

Dollar sign output as “ $ “ ◆

Dollar sign output as “￥“

Dollar sign output as “ € “

None ◆

200 msec.

500 msec.

Disable

Immediate time out

Short time out ◆

Medium time out

1 sec.

1.5 sec.

2 sec.

3 sec.

Long time out

Force verification

Auto Power Off Duration

Disable

Enable ◆

Unavailable for FBC6000 series.

Short

Medium

Long

Extremely long ◆

0

1

0

1

2

0

1

2

3

0

1

2

3

3

4

5

6

4

5

3

4

5

6

0

1

2

0

1

2

0

1

2

3

4

5

0

1

Option Code

0

1

2

3

4

5

6

7

0

1

9

Operation and output control (continued)

Command

Good Read Duration Short

Medium ◆

Long

Extremely long

Parameter Selection

Hands Free Time-out Short ◆

Medium

Long

Extremely long

Buzzer Tone Adjust Buzzer tone – mute

Buzzer tone – low

Buzzer tone – medium ◆

Buzzer tone – high

Buzzer tone – extremely high

Good–read beep before data transmission ◆

Good–read beep after data transmission

Power–on beep ◆

No Power–on beep

Message string breakdown

Keyboard interface output (PS/2, DOS/V, USB HID)

Preamble

1-15 char.

Data Length

2-3 digits

Prefix ID

1 or 2 char.

Scanned Data

Variable

Serial interface output (RS-232, USB COM)

STX

1 char.

Suffix ID

1 or 2 char.

Postamble

1-15 char.

Preamble Data Length Prefix ID Scanned Data Suffix ID Postamble

1-15 char. 2-3 digits 1 or 2 char. Variable 1 or 2 char. 1-15 char.

ETX

1 char.

Record Suffix

1 char.

Record

Suffix

1 char.

Option Code

0

1

2

3

0

1

2

3

0

1

2

3

4

5

6

7

8

10

Option codes

0

1

2

3

4

5

6

7

8

9

11

A

B

C

D

E

F

FIN (Finish)

END (Exit)

System commands

PROGRAM

(Enter Programming Mode)

END

(Exit Programming Mode)

System Information

Factory Default

PowerTool Host Link

Save User Default

User Default

12