Nikon 29842-9425-19 - D80 Digital SLR Camera manual

.4#
%N
.OREPRODUCTIONINANYFORMOFTHISMANUALINWHOLEORINPARTEXCEPTFOR
BRIEFQUOTATIONINCRITICALARTICLESORREVIEWSMAYBEMADEWITHOUTWRITTEN
AUTHORIZATIONFROM.)+/.#/20/2!4)/.
4HE.IKON'UIDETO$IGITAL0HOTOGRAPHY
WITHTHE
$)')4!,#!-%2!
%N
0RINTEDIN4HAILAND
-"!
3"+
Where to Find It
Find what you’re looking for from:
The Table of Contents
See pages v–vi
Find items by function or menu name.
The Q&A Index
See pages vii–ix
Know what you want to do but don’t know the function name? Find it from
the “question and answer” index.
The Index
See pages 147–149
Search by key word.
Error Messages
See pages 132–133
If a warning is displayed in the control panel, viewfinder, or monitor, find
the solution here.
Troubleshooting
See pages 129–131
Camera behaving unexpectedly? Find the solution here.
Digitutor
“Digitutor,” a series of “watch and learn” manuals in movie form, is available at the following website:
http://www.nikondigitutor.com/index_eng.html
Help
Use the camera‘s on-board help feature for help on menu items and other topics. See page 9 for
details.
Introduction
Tutorial
Photography and Playback
More on Photography (All Modes)
P, S, A, and M Modes
Reference
More on Playback
Connecting to a Television, Computer, or Printer
Playback Options: The Playback Menu
Shooting Options: The Shooting Menu
Menu Guide
Custom Settings
Basic Camera Settings: The Setup Menu
Creating Retouched Copies: The Retouch Menu
Technical Notes
i
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety
instructions where all those who use the product will read them.
The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol:
This icon marks warnings. To prevent possible injury, read all warnings before using
this Nikon product.
WARNINGS
Keep the sun out of the frame
Keep the sun well out of the frame when shooting
backlit subjects. Sunlight focused into the camera
when the sun is in or close to the frame could cause
a fire.
Do not look at the sun through the viewfinder
Viewing the sun or other strong light source through
the viewfinder could cause permanent visual impairment.
Using the viewfinder diopter control
When operating the viewfinder diopter control with
your eye to the viewfinder, care should be taken not
to put your finger in your eye accidentally.
Turn off immediately in the event of malfunction
Should you notice smoke or an unusual smell coming from the equipment or AC adapter (available
separately), unplug the AC adapter and remove the
battery immediately, taking care to avoid burns. Continued operation could result in injury. After removing the battery, take the equipment to a Nikon-authorized service center for inspection.
Do not disassemble
Touching the product’s internal parts could result
in injury. In the event of malfunction, the product
should be repaired only by a qualified technician.
Should the product break open as the result of a
fall or other accident, remove the battery and/or AC
adapter and then take the product to a Nikon-authorized service center for inspection.
Do not use in the presence of flammable gas
Do not use electronic equipment in the presence of
flammable gas, as this could result in explosion or
fire.
Keep out of reach of children
Failure to observe this precaution could result in injury.
Do not place the strap around the neck of an infant or
child
Placing the camera strap around the neck of an infant
or child could result in strangulation.
Observe proper precautions when handling batteries
Batteries may leak or explode if improperly handled.
ii
For Your Safety
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Observe the following precautions when handling
batteries for use in this product:
Use only batteries approved for use in this equipment.
Do not short or disassemble the battery.
Be sure the product is off before replacing the battery. If you are using an AC adapter, be sure it is unplugged.
Do not attempt to insert the battery upside down or
backwards.
Do not expose the battery to flame or to excessive
heat.
Do not immerse in or expose to water.
Replace the terminal cover when transporting the
battery. Do not transport or store the battery with
metal objects such as necklaces or hairpins.
Batteries are prone to leakage when fully discharged.
To avoid damage to the product, be sure to remove
the battery when no charge remains.
When the battery is not in use, attach the terminal
cover and store in a cool, dry place.
The battery may be hot immediately after use or
when the product has been used on battery power
for an extended period. Before removing the battery
turn the camera off and allow the battery to cool.
Discontinue use immediately should you notice any
changes in the battery, such as discoloration or deformation.
Observe proper precautions when handling the quick charger
Keep dry. Failure to observe this precaution could
result in fire or electric shock.
Dust on or near the metal parts of the plug should be
removed with a dry cloth. Continued use could result
in fire.
Do not handle the power cable or go near the charger during thunderstorms. Failure to observe this
precaution could result in electric shock.
Do not damage, modify, or forcibly tug or bend the
power cable. Do not place it under heavy objects or
expose it to heat or flame. Should the insulation be
damaged and the wires become exposed, take the
power cable to a Nikon-authorized service representative for inspection. Failure to observe this precaution could result in fire or electric shock.
• Do not handle the plug or charger with wet hands.
ROMs on an audio CD player could cause hearing loss
Failure to observe this precaution could result in elecor damage the equipment.
tric shock.
Observe caution when using the flash
Use appropriate cables
Do not operate the flash with the flash window
When connecting cables to the input and output
touching a person or object. Failure to observe this
jacks, use only the cables provided or sold by Nikon
precaution could result in burns or fire.
for the purpose to maintain compliance with product
Using the flash close to the subject’s eyes could cause
regulations.
temporary visual impairment. Particular care should
be observed when photographing infants, when the
CD-ROMs
flash should be no less than one meter (39 in.) from
CD-ROMs containing software or manuals should not
the subject.
be played back on audio CD equipment. Playing CDAvoid contact with liquid crystal
Should the monitor break, care should be taken to avoid injury due to broken glass and to prevent the liquid crystal
from the monitor touching the skin or entering the eyes or mouth.
Notices
• No part of the manuals included with this product
may be reproduced, transmitted, transcribed, stored in
a retrieval system, or translated into any language in
any form, by any means, without Nikon’s prior written
permission.
• Nikon reserves the right to change the specifications
of the hardware and software described in these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting
from the use of this product.
• While every effort has been made to ensure that the information in these manuals is accurate and complete,
we would appreciate it were you to bring any errors or
omissions to the attention of the Nikon representative
in your area (address provided separately).
Notices for Customers in the U.S.A.
Federal Communications Commission (FCC) Radio Frequency Interference Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
D80
CAUTIONS
Modifications
The FCC requires the user be notified that any changes
or modifications made to this device that are not expressly approved by Nikon Corporation may void the
user’s authority to operate the equipment.
Interface Cables
Use the interface cables sold or provided by Nikon for
your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules.
Notice for Customers in the State of California
WARNING: Handling the cord on this product may expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Wash hands after handling.
Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A.
Tel.: 631-547-4200
Notices for Customers in Canada
CAUTION
This class B digital apparatus meets all requirements of
the Canadian Interference Causing Equipment Regulations.
ATTENTION
Cet appareil numérique de la classe B respecte toutes
les exigences du Règlement sur le matériel brouilleur du
Canada.
Notices
iii
Symbol for Separate Collection in European Countries
This symbol indicates that this product is to be collected separately.
The following apply only to users in European countries:
• This product is designated for separate collection at an appropriate collection point. Do not dispose
of as household waste.
• For more information, contact the retailer or the local authorities in charge of waste management.
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that has been digitally copied or reproduced by means of a scanner, digital camera, or other device may be punishable by law.
• Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds, or local government bonds,
even if such copies or reproductions are stamped
“Sample.”
The copying or reproduction of paper money, coins,
or securities which are circulated in a foreign country
is prohibited.
Unless the prior permission of the government has
been obtained, the copying or reproduction or unused
postage stamps or post cards issued by the government is prohibited.
The copying or reproduction of stamps issued by the
government and of certified documents stipulated by
law is prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private companies
(shares, bills, checks, gift certificates, etc.), commuter
passes, or coupon tickets, except when a minimum
of necessary copies are to be provided for business
use by a company. Also, do not copy or reproduce
passports issued by the government, licenses issued
by public agencies and private groups, ID cards, and
tickets, such as passes and meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted creative
works such as books, music, paintings, woodcuts,
prints, maps, drawings, movies, and photographs is
governed by national and international copyright laws.
Do not use this product for the purpose of making illegal copies or to infringe copyright laws.
Disposing of Data Storage Devices
Please note that deleting images or formatting memory cards or other data storage devices does not completely
erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using
commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the
privacy of such data is the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data using commercial deletion software, or format the device and then completely refill it with images containing no private information (for example, pictures of empty sky). Be sure to also replace any pictures selected for preset white balance.
Care should be taken to avoid injury when physically destroying data storage devices.
Trademark Information
Macintosh, Mac OS, and QuickTime are registered trademarks of Apple.Inc. Microsoft, Windows, and Windows Vista
are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
The SD logo is a trademark of the SD Card Association. The SDHC logo is a trademark. Adobe, Acrobat, and Adobe
Reader are registered trademarks of Adobe Systems Inc. PictBridge is a trademark. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered
trademarks of their respective holders.
iv
Notices
Table of Contents
For Your Safety ................................................................ ii
Notices .............................................................................. iii
Q & A Index ....................................................................vii
Introduction ..................................................
..................................................1
1
Getting to Know the Camera.................................... 2
Using Camera Menus ...................................................9
First Steps ...................................................................... 11
Attaching a Lens ......................................................................... 11
Charging and Inserting the Battery ................................ 12
Basic Setup ..................................................................................... 14
Inserting Memory Cards ........................................................ 15
Adjusting Viewfinder Focus ................................................. 17
Tutorial ........................................................
........................................................18
18
“Point-and-Shoot” Photography ( Mode) ...... 19
Creative Photography (Digital Vari-Programs) ... 24
Portrait ....................................................................................... 25
Landscape ............................................................................... 25
Close up .................................................................................... 25
SportsAutofocus .................................................................. 25
Night landscape................................................................... 25
Night portrait ......................................................................... 25
Basic Playback .............................................................. 26
Reference ....................................................
....................................................27
27
More on Photography (All Modes) ..............28
.............. 28
Focus ............................................................................... 28
Autofocus ........................................................................................ 28
Focus Area Selection ................................................................ 30
Focus Lock ...................................................................................... 31
Manual Focus ................................................................................ 32
Image Quality and Size ............................................. 33
Image Quality ............................................................................... 34
Image Size ....................................................................................... 35
Choosing a Shooting Mode .................................... 36
Self-Timer Mode ( ) ................................................................. 37
Using a Remote Control ( ) ................................................ 38
Using the Built-in Flash ............................................. 40
ISO Sensitivity .............................................................. 43
Two-Button Reset ....................................................... 44
P, S, A, and M Modes ....................................
....................................45
45
Mode P (Programmed Auto)................................... 47
Mode S (Shutter-Priority Auto) .............................. 48
Mode A (Aperture-Priority Auto) .......................... 49
Mode M (Manual) ....................................................... 50
Exposure ........................................................................ 52
Metering .......................................................................................... 52
Autoexposure Lock ................................................................... 53
Exposure Compensation ....................................................... 54
Flash Exposure Compensation .......................................... 55
Bracketing ....................................................................................... 56
White Balance .............................................................. 58
Fine-Tuning White Balance................................................... 58
Choosing a Color Temperature.......................................... 59
Preset White Balance ................................................................ 59
More on Playback ........................................
........................................61
61
Viewing Photographs on the Camera ................. 61
Photo Information ..................................................................... 62
Viewing Multiple Images: Thumbnail Playback ....... 63
Taking a Closer Look: Playback Zoom............................ 64
Protecting Photographs from Deletion ........................ 65
Deleting Individual Photographs ..................................... 65
Connecting to a TV, Computer, or Printer ...
...66
66
Viewing Photographs on TV ................................... 66
Connecting to a Computer ..................................... 67
Before Connecting the Camera......................................... 67
Connecting the USB Cable ................................................... 67
Printing Photographs ................................................ 69
Printing Via Direct USB Connection ................................ 69
Menu Guide .................................................
.................................................74
74
Playback Options: The Playback Menu ............... 74
Delete ................................................................................................ 74
Playback Folder ............................................................................ 75
Rotate Tall ........................................................................................ 75
Slide Show ...................................................................................... 75
Hide Image ..................................................................................... 78
Print Set ............................................................................................ 78
Shooting Options: The Shooting Menu .............. 79
Optimize Image (P, S, A, and M Modes) ........................ 79
Image Quality (All Modes) .................................................... 81
Image Size (All Modes) ............................................................ 81
White Balance (P, S, A, and M Modes) ............................ 82
ISO Sensitivity (All Modes) .................................................... 83
Long Exp. NR (All Modes) ...................................................... 83
High ISO NR (All Modes) ........................................................ 83
Multiple Exposure (P, S, A, and M Modes).................... 84
Custom Settings .......................................................... 86
R: Reset .............................................................................................. 86
1: Beep (All Modes) .................................................................... 86
2: AF-Area Mode (All Modes) .............................................. 87
3: Center AF Area (All Modes) ............................................. 87
4: AF-Assist (All Modes Except , , and ) ........ 87
5: No Memory Card? (All Modes) ...................................... 88
6: Image Review (All Modes) ............................................... 88
7: ISO Auto (P, S, A, and M Modes Only)........................ 88
8: Grid Display (All Modes) .................................................... 89
9: Viewfinder Warning (All Modes)................................... 89
10: EV Step (All Modes) ........................................................... 89
11: Exposure Comp. (P, S, A, and M Modes Only).... 89
12: Center-Weighted (P, S, A, and M Modes Only) .... 90
13: Auto BKT Set (P, S, A, and M Modes Only) ........... 90
14: Auto BKT Order (P, S, A, and M Modes Only)...... 91
Table of Contents
v
15: Command Dials (P, S, A, and M Modes Only) .... 91
16: FUNC Button (All Modes) .............................................. 92
17: Illumination (All Modes) ................................................. 93
18: AE-L/AF-L (All Modes) ...................................................... 94
19: AE Lock (All Modes) ........................................................... 94
20: Focus Area (All Modes).................................................... 94
21: AF Area Illumination (All Modes) .............................. 95
22: Built-in Flash (P, S, A, and M Modes Only) ............ 95
23: Flash Warning (P, S, A, and M Modes Only) ......... 98
24: Flash Shutter Speed
(P, S, A, and M Modes Only) .................................................. 98
25: Auto FP (P, S, A, and M Modes Only) ....................... 98
26: Modeling Flash (P, S, A, and M Modes Only) ...... 98
27: Monitor-Off (All Modes) ................................................. 98
28: Auto Meter-Off (All Modes) .......................................... 99
29: Self-Timer (All Modes) ...................................................... 99
30: Remote On Duration (All Modes) ............................. 99
31: Exp. Delay Mode (All Modes) ...................................... 99
32: MB-D80 Batteries (All Modes) .................................. 100
Basic Camera Settings: The Setup Menu ..........101
CSM / Setup Menu ................................................................. 101
Format Memory Card ........................................................... 102
World Time .................................................................................. 103
LCD Brightness .......................................................................... 103
Video Mode................................................................................. 103
Language ..................................................................................... 103
USB ................................................................................................... 104
Image Comment ..................................................................... 104
Folders ............................................................................................ 105
vi
Table of Contents
File No. Sequence .................................................................... 106
Mirror Lock-Up .......................................................................... 106
Dust Off Ref Photo .................................................................. 106
Battery Info .................................................................................. 107
Firmware Version ..................................................................... 108
Auto Image Rotation ............................................................. 108
Creating Retouched Copies:
The Retouch Menu ...................................................109
D-Lighting .................................................................................... 110
Red-Eye Correction ................................................................ 111
Trim .................................................................................................. 111
Monochrome ............................................................................. 112
Filter Effects ................................................................................. 112
Small Picture ............................................................................... 112
Image Overlay ........................................................................... 114
Technical Notes ........................................ 116
Optional Accessories ...............................................116
Lenses ............................................................................................. 117
Optional Flash Units (Speedlights) ............................... 119
Other Accessories ................................................................... 122
Caring for the Camera .............................................124
Caring for the Camera and Battery: Cautions ........ 127
Troubleshooting........................................................129
Camera Error Messages and Displays ......................... 132
Appendix .....................................................................134
Specifications .............................................................142
Index..............................................................................147
Q & A Index
Find what you’re looking for using this “question and answer” index.
General Questions
Question
How do I use the menus?
How do I get more information on a menu?
What do these indicators mean?
What does this warning mean?
How many more shots can I take with this card?
How much charge does the battery have left?
What does “exposure” mean and how does it work?
What do I do with the viewfinder eyepiece cap?
What optional flash units (Speedlights) can I use?
What lenses can I use?
What accessories are available for my camera?
What memory cards can I use?
What software is available for my camera?
Who can I ask to repair or inspect my camera?
How do I clean the camera or lens?
Key phrase
Using the menus
Help
Control panel, viewfinder
Camera Error messages and displays
Number of exposures remaining
Battery level
Exposure
Self timer, remote control
Optional flash units
Lenses
Accessories for the D80
Approved memory cards
Accessories for the D80
Servicing the camera
Cleaning the camera
Page #
9–10
3, 9
5, 6
132–133
19
19
46
37, 38
119–121
117–118
123
122
123
x, 126
124
Camera Setup
Question
How do I focus the viewfinder?
How do I keep the monitor from turning off?
How do I set the clock?
How do I set the clock for daylight savings time?
How do I change time zones when I travel?
How do I adjust monitor brightness?
How do I restore default settings?
How do I turn off the light on the front of the camera?
Can I display a framing grid in the viewfinder?
How do I view the control panel in the dark?
How do I keep the shutter speed and aperture displays
from turning off?
How do I change the self timer delay?
How do I change the remote delay?
How do I keep the camera from beeping?
How do I view all the items in the menus?
Can I display the menus in a different language?
How do I keep the file number from being reset when
I insert a new memory card?
How do I reset file numbering to 1?
Key phrase
Viewfinder focus
Monitor off
Page #
17
98
World time
103
LCD brightness
Two-button reset
AF-assist illuminator
Grid display
LCD illuminator
103
44
87
89
3, 93
Auto meter off
99
Self timer
Remote control
Beep
CSM / setup menu
Language
99
99
86
101
103
File number sequence
106
Q & A Index
vii
Taking Photographs
Question
Is there an easy way to take snapshots?
Is there an easy way to take more creative shots?
How do I bring out a portrait subject?
How can I get good landscape shots?
How do I take close ups of small objects?
How do I “freeze” a moving subject?
How do I shoot scenery at night?
Can I include night backgrounds in my portraits?
How do I take a lot of photographs quickly?
Can I shoot a self-portrait?
Is there a remote control for this camera?
How do I adjust exposure?
How do I freeze or blur moving objects?
How do I blur background details?
Can I make photos brighter or darker?
How do I make a time exposure?
How do I use the flash?
Can the flash fire automatically when needed?
How do I keep the flash from firing?
How do I prevent red eye?
Can I take pictures under low light without the flash?
Can I control how the camera focuses?
How do I focus on a moving subject?
How do I choose where the camera focuses?
Can I change the composition after focusing?
How do I improve image quality?
How do I take bigger photographs?
How can I get more photos on the memory card?
Can I take photos at a reduced size for e-mail?
viii
Q & A Index
Key phrase
Auto mode
Digital Vari-Program modes
Portrait mode
Landscape mode
Close-up mode
Sports mode
Night landscape mode
Night portrait mode
Shooting mode
Self timer
Remote control
Exposure; P, S, A, and M modes
Mode S (shutter-priority auto)
Mode A (aperture-priority auto)
Exposure compensation
Long time-exposures
Page #
19–23
24–25
24, 25
24, 25
24, 25
24, 25
24, 25
24, 25
36
37
38–39
45–51
48
49
54
51
Flash photography, flash mode
40–42
Red-eye reduction
ISO sensitivity
Autofocus
Autofocus mode
Focus area
Focus lock
41
43
28–29
29
30
31
Image quality and size
33–35
Viewing, Printing, and Retouching Photographs
Question
Can I view my photographs on the camera?
Can I view more information about photos?
Key phrase
Camera playback
Photo info
Why parts of my photos blink?
Photo info, highlights
How do I get rid of an unwanted photo?
Can I delete several photos at once?
Can I zoom in on pictures to make sure they’re in focus?
Can I protect photos from accidental deletion?
Is there an automatic playback (“slide show”) option?
Can I view my photos on TV?
Can I set a slide show to music?
How do I copy photos to my computer?
How do I print photographs?
Can I print photos without a computer?
Can I print the date on my photographs?
How do I order professional prints?
How do I bring out details in shadows?
Can I get rid of red eye?
Can I crop photographs on the camera?
Can I create a monochrome copy of a photograph?
Can I create a copy with different colors?
Can I make a small copy of a photograph?
Can I overlay two photos to make a single image?
Deleting individual photos
Delete
Playback zoom
Protect
Slide show
Television playback
Pictmotion
Connecting to a computer
Printing photographs
Printing via USB
Time stamp, DPOF
Print set
D-lighting
Red-eye correction
Trim
Monochrome
Filter effects
Small picture
Image overlay
Page #
61, 63
62–63
62–63,
131
26, 65
74
64
65
75–77
66
75–77
67–68
69–73
69–73
71, 73
73
110
111
111
112
112
112–113
114–115
Q & A Index
ix
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually-updated information is available on-line at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequentlyasked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. See the following URL for contact
information: http://nikonimaging.com/
x
Q & A Index
Introduction
Thank you for your purchase of a Nikon D80 single-lens reflex (SLR) digital camera with interchangeable lenses. This manual has been written to help you enjoy taking pictures with
your Nikon digital camera. Read this manual thoroughly before use, and keep it handy when
using the product.
To make it easier to find the information you need, the following symbols and conventions
are used:
This icon marks cautions, information that
should be read before use to prevent damage to the camera.
This icon marks tips, additional information that may be helpful when using the
camera.
This icon marks notes, information that
should be read before using the camera.
This icon indicates that more information
is available elsewhere in this manual or in
the Quick Start Guide.
This icon marks settings that can be adjusted using camera menus.
This icon marks settings that can be finetuned from the Custom Settings menu.
Lens
An AF-S DX 18–135 mm f/3.5–5.6G ED Zoom-Nikkor lens (
purposes.
1
2 3
4
145) is used in this manual for illustrative
5
9
1. Focal length scale
2. Focus ring
3. Focal length index
8
7
4. Mounting index: 11
5. Rear cap: 11
6. CPU contacts: 117
6
7. A-M mode switch:
8. Zoom ring: 21
9. Lens cap: 17, 19
11, 32
Introduction
1
Getting to Know the Camera
Take a few moments to familiarize yourself with camera controls and displays. You may
find it helpful to bookmark this section and refer to it as you read through the rest of the
manual.
Camera Body
1
23 24
33
25
2
22
32
3
20
26
4
19
21
5
6
31
7
18
17
16
15 14
13
1 Built-in flash ........................................................... 23, 40
2 (flash mode) button ........................................... 40
(flash compensation) ....................................... 55
3 (bracketing) button ....................................56–57
4 Infrared receiver .......................................................... 38
5 Lens mounting index .............................................. 11
6 Eyelet for camera strap .............................................. 8
7 Connector cover ..........................................66, 67, 70
8 USB connector ............................................................. 67
9 Reset switch.................................................................129
10 DC-IN connector for optional EH-5/EH-5a
AC adapter....................................................................123
11 Video connector ......................................................... 66
12 Remote cord connector.......................................123
13 Focus-mode selector ....................................... 28, 32
14 Lens release button ................................................. 11
15 Lens mount .................................................................... 11
16 Mirror ....................................................................106, 125
17 Depth-of-field preview button .......................... 49
18 Grip...................................................................................... 21
19 Sub-command dial ........................................... 10, 91
20 FUNC. button............................................................... 92
2
Introduction: Getting to Know the Camera
27
8
28
9
30
10
11
29
12
21 Eyelet for camera strap .............................................. 8
22 AF-assist illuminator ......................................... 28, 87
Self-timer lamp .................................................... 37, 38
Red-eye reduction lamp ........................................ 39
23 Shutter-release button.................................... 22, 23
24 Power switch ......................................................... 11, 19
Illuminator switch ......................................................... 3
25
(exposure compensation) button ........... 54
● (reset button) .......................................................... 44
26 (shooting mode) button .................................. 36
Single/continuous mode ...................................... 36
Self-timer mode .......................................................... 37
Remote control mode............................................. 38
27 (AF mode) button................................................. 29
● (reset button) .......................................................... 44
28 Control panel ................................................................... 5
29 Accessory shoe cover ............................................119
30 Accessory shoe (for optional flash unit) .....119
31
(focal plane mark).............................................. 32
32 Mode dial .................................................47, 48, 49, 50
33
(metering mode) button .............................. 52
(format) button ................................................. 16
19
18
17
16
1
20 21
2
3
4
6
7
8
15
14
13
12
5
1
2
3
4
5
6
11
7
8
9
10
11
12
13
14
15
9
16
10
17
Viewfinder eyepiece .................................................... 8
Viewfinder eyepiece cup .......................... 6, 17, 21
Diopter adjustment control................................. 17
(AE-L/AF-L) button ..................................... 31, 94
DK-5 viewfinder eyepiece cap .............................. 8
Main command dial ......................................... 10, 91
18
19
20
21
Memory card slot cover ......................................... 15
Focus selector lock .................................................... 30
Memory card access lamp............................ 15, 23
button .......................................................................... 9
Battery-chamber cover latch ............................. 13
Battery-chamber cover.......................................... 13
Multi selector *
Tripod socket
(playback zoom) button................................. 64
QUAL (image quality/size) button.............. 34, 35
(thumbnail) button ........................................... 63
ISO (ISO sensitivity) button .................................... 43
(help/protect) button ................................. 9, 65
WB (white balance) button ................................... 58
(menu) button......................................................... 9
(playback) button ....................................... 26, 61
Monitor ........................................................................ 9, 26
(delete) button ............................................ 26, 65
(format) button ................................................. 16
* Multi selector
The multi selector is used for menu navigation and to control the display of photo information during
playback.
View more photo info
Move cursor up
View previous photo
Return to previous menu
Cancel
Playback ( 61)
Menu navigation (
9)
View next photo
Display sub-menu
Make selection
View more photo info
Move cursor down
Help
For help on the current mode or menu item, press the
button at the
button is
bottom left corner of the monitor. Help is displayed while the
pressed; to scroll the display, press the multi selector up or down. Help is
available in (auto) and Digital Vari-Program modes or when a icon is
displayed in the bottom left corner of the monitor.
The LCD Illuminator
Holding the power switch in the position activates the exposure meters and the control panel backlight (LCD illuminator), allowing the display to be read in the dark. After the power switch is released,
the illuminator will remain active while the exposure meters are active or until the shutter is released.
Introduction: Getting to Know the Camera
3
The Mode Dial
The D80 offers a choice of the following eleven shooting modes:
Advanced Modes (Exposure Modes)
Select these modes for full control over camera settings.
P — Programmed auto ( 47): Camera chooses
shutter speed and aperture, user controls other
settings.
S — Shutter-priority auto ( 48): Choose fast
shutter speeds to freeze action, slow shutter
speeds to suggest motion by blurring moving
objects.
A — Aperture-priority auto ( 49): Adjust aperture to soften background details or increase
depth-of-field to bring both main subject and
background into focus.
M — Manual ( 50): Match shutter speed and
aperture to your creative intent.
Point-and-Shoot Modes (Digital Vari-Programs)
Selecting a Digital Vari-Program automatically optimizes settings to suit the selected
scene, making creative photography as simple as rotating the mode dial.
— Auto ( 19): Camera adjusts settings
automatically to produce optimal results with
“point-and-shoot” simplicity. Recommended
for first-time users of digital cameras.
— Portrait ( 24, 25): Shoot portraits with
background in soft focus.
— Landscape ( 24, 25): Preserve details in
landscape shots.
4
Introduction: Getting to Know the Camera
— Close up ( 24, 25): Take vivid close-ups of
flowers, insects, and other small objects.
— Sports ( 24, 25): Freeze motion for dynamic sports shots.
— Night landscape ( 24, 25): Take landscape
shots at night.
— Night portrait ( 24, 25): Shoot portraits
against a dimly-lit backdrop.
Control Panel
1
2
11
3
10
4
9
12
23
13
22
14
21
20
8
15
7
16
19
17
18
5
6
1 Shutter speed ....................................................... 48, 50
Exposure compensation value .......................... 54
Flash compensation value.................................... 55
ISO sensitivity ................................................................ 43
White balance fine-tuning, or
color temperature.............................................. 58, 59
Number of shots in bracketing sequence
.....................................................................................56, 140
2 ISO sensitivity indicator .......................................... 43
ISO AUTO indicator ................................................... 43
3 Battery indicator ......................................................... 19
4 Flash sync mode ................................................. 40, 41
5 Image quality ................................................................ 34
6 Image size ....................................................................... 35
7 White balance mode ............................................... 58
8 Number of exposures remaining ..................... 19
Number of shots remaining before
memory buffer fills .................................................... 36
PC mode indicator..................................................... 68
Preset white balance recording indicator ... 60
9 “K” (appears when memory remains for over
1000 exposures)
10 Shooting mode ........................................................... 36
Self-timer/remote control mode .............. 37, 38
11 Aperture (f-number) ......................................... 49, 50
Bracketing increment .............................................. 56
PC connection indicator ........................................ 68
12 Exposure compensation indicator .................. 54
13 Flash compensation indicator............................ 55
14 Flexible program indicator ................................... 47
15 Focus area ............................................................... 30, 87
AF-area mode ....................................................... 30, 87
16 AF mode .......................................................................... 29
17 Bracketing progress indicator............................. 56
18 Metering mode ........................................................... 52
19 Multiple exposure indicator ................................ 84
20 Black-and-white indicator ..................................... 81
21 “Beep” indicator ........................................................... 86
22 “Clock not set” indicator ............................103, 132
23 Bracketing indicator ................................................. 56
Large-Capacity Memory Cards
When enough memory remains on the memory card to record a thousand
or more pictures at current settings, the number of exposures remaining
will be shown in thousands, rounded down to the nearest hundred (e.g., if
there is room for approximately 1,260 exposures, the exposure count display will show 1.2 K).
Introduction: Getting to Know the Camera
5
The Viewfinder Display
1
6
2
7
If the battery is totally exhausted or not inserted, the display in the viewfinder will dim.
The viewfinder display will return to normal
when a fully-charged battery is inserted.
8
3
9 10 11
4
12
13
14
15 16
17
18
5
19
1 Framing grid (displayed when On is selected
for Custom Setting 8 (Grid display)) ........... 89
2 8-mm (0.31 in.) reference circle for centerweighted metering ........................................... 52, 90
3 “No memory card” warning 1 .....................15, 133
4 Battery indicator 1 ....................................................... 19
5 Black-and-white indicator 1................................... 81
6 Focus brackets (focus area) ...................19, 21, 30
7 Normal-frame focus brackets
(focus area) ............................................................. 21, 87
8 Wide-frame focus brackets (focus area) ....... 87
9 Focus indicator ............................................................ 22
10 Flash value (FV) lock ................................................. 94
11 Autoexposure (AE) lock .......................................... 94
12 Shutter speed ....................................................... 48, 50
13 Aperture (f-number) ......................................... 48, 50
1. Can be hidden with Custom Setting 9 (
20 21
22
14 Electronic analog exposure display ................ 50
Exposure compensation ........................................ 54
15 Flash compensation indicator............................ 55
16 Exposure compensation indicator .................. 54
17 Number of exposures remaining ..................... 19
Number of shots remaining before
memory buffer fills .................................................... 36
Preset white balance recording indicator ... 60
Exposure compensation value .......................... 54
Flash compensation value.................................... 55
PC connection indicator ........................................ 68
18 Flash-ready indicator................................................ 23
19 Auto ISO sensitivity indicator .............................. 43
20 Battery indicator ......................................................... 19
21 Bracketing indicator ................................................. 56
22 “K” (appears when memory remains for
over 1000 exposures).................................................. 5
89)
The Control Panel and Viewfinder
The response times and brightness of the control panel and viewfinder may vary with temperature.
Owing to the characteristics of this type of display, you may notice fine lines radiating outward from
the selected focus area. This is normal and does not indicate a malfunction.
6
Introduction: Getting to Know the Camera
Supplied Accessories
The MH-18a Quick Charger ( 12)
The MH-18a is for use with the supplied EN-EL3e battery.
AC adapter plug
CHARGE lamp
Wall plug (shape varies with
country of sale)
AC inlet
The EN-EL3e Rechargeable Li-ion Battery (
The EN-EL3e is for use with the D80.
12, 13)
Negative terminal
Signal contact
Positive terminal
Terminal cover
The use of third-party rechargeable
Li-ion batteries not bearing the Nikon
holographic seal shown above could
interfere with normal operation of
the camera or result in the batteries
overheating, igniting, rupturing, or
leaking.
Use Only Nikon Brand Electronic Accessories
Nikon cameras are designed to the highest standards and include complex electronic circuitry. Only
Nikon brand electronic accessories (including lenses, Speedlights, battery chargers, batteries, and AC
adapters) certified by Nikon specifically for use with this Nikon digital camera are engineered and
proven to operate within the operational and safety requirements of this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY VOID YOUR NIKON WARRANTY.
For more information about Nikon brand accessories, contact an authorized Nikon dealer.
Introduction: Getting to Know the Camera
7
The Camera Strap
Attach the camera strap as shown below.
The BM-7 LCD Monitor Cover
A clear plastic cover is provided with the camera to keep the monitor clean and protect it when the camera is not in use. To attach the
cover, insert the projection on the top of the cover into the matching indentation above the camera monitor () and press the bottom of the cover until it clicks into place ().
To remove the cover, hold the camera firmly and pull the bottom of
the cover gently until outwards as shown at right.
The DK-21 Viewfinder Eyepiece Cup
Before attaching the DK-5 viewfinder eyepiece cap and other viewfinder accessories ( 122), remove the viewfinder eyepiece cup by
placing your fingers underneath the flanges at either side and sliding it off as shown at right.
8
Introduction: Getting to Know the Camera
Using Camera Menus
Most shooting, playback, and setup options can be accessed from
the camera menus. To view the menus, press the button.
Choose from playback, shooting, Custom Settings, setup, and
retouch menus (see below)
Slider shows position in current
menu
Current setting for each option is
shown by icon
If “?” icon is displayed, help for
the current item can be viewed
by pressing
button
Menu
Playback
Shooting
Custom Settings
Setup
Retouch
Current menu item is highlighted
Description
Adjust playback settings and manage photos ( 74).
Adjust shooting settings ( 79).
Personalize camera settings ( 86).
Format memory cards and perform basic camera setup ( 101).
Create retouched copies of existing photographs ( 109).
The multi selector and OK button are used to navigate the camera menus.
Move cursor up
Increase number
▲
▲
▼
Return to previous menu
Display sub-menu
▼
Move cursor down
Decrease number
Press OK to select highlighted option.
Introduction: Using Camera Menus
9
To modify menu settings:
1
2
Display menus.
Highlight icon for current menu.
3
Select menu.
4
5
Position cursor in selected menu.
6
Highlight menu item.
7
Display options.
8
Highlight option.
Menu items that are displayed in gray are not currently available.
Make selection.
Press the shutter-release button halfway to exit the menus and return to shooting mode (
19, 28). The monitor will turn off.
Using the Command Dials
The main command dial can be used to move the cursor up and down, the
sub-command dial to move the cursor left and right. The sub-command
dial can not be used to make a selection.
10
Introduction: Using Camera Menus
First Steps
Attaching a Lens
Care should be taken to prevent dust from entering the camera when the lens is removed.
1 Turn the camera off.
2 Remove the rear cap from the lens.
Remove the camera body cap.
Keeping the mounting index on the lens aligned with the
3 mounting
index on the camera body, position the lens in the
camera’s bayonet mount and rotate the lens in the direction
shown until it clicks into place.
If the lens is equipped with an A-M or M/A-M switch, select A
(autofocus) or M/A (autofocus with manual priority).
Detaching Lenses
Be sure the camera is off when removing or exchanging lenses. To remove the lens, press and hold
the lens-release button while turning the lens clockwise. After removing the lens, replace the camera
body cap and rear lens cover.
Aperture Ring
If the lens is equipped with an aperture ring (
f-number). See the lens manual for details.
45, 117), lock aperture at the minimum setting (highest
Introduction: First Steps
11
Charging and Inserting the Battery
The supplied EN-EL3e battery is not charged at shipment. Charge the battery using the supplied MH-18a battery charger as described below.
1 Charge the battery.
Liio
n
BA
TT
ER
Y
PA
CK
1.1 Remove the terminal cover from the battery.
1.2 Connect the power cord to the charger and plug it in.
1.3 Place the battery in the charger. The CHARGE lamp will blink
as the battery charges. About two and a quarter hours are
required for an exhausted battery to fully charge.
1.4 Charging is complete when the CHARGE lamp stops blinking. Remove the battery from the charger and unplug the
charger.
EN-EL3e Rechargeable Li-ion Batteries
The EN-EL3e shares information with compatible devices. The camera uses this information to display
the battery charge state in six levels in the control panel and to show the battery charge state, remaining battery life, and number of pictures taken since the battery was last charged in the setup menu
Battery Info display ( 107).
12
Introduction: First Steps
2 Insert the battery.
2.1 After confirming that the camera is off, open the battery
chamber cover.
2.2 Insert a fully charged battery as shown at right. Close the
battery chamber cover.
The Battery and Charger
Read and follow the warnings and cautions on pages ii–iii and 127–128 of this manual, together with any
warnings and instructions provided by the battery manufacturer. Use only EN-EL3e batteries. The D80
is not compatible with the MS-D70 CR2 battery holder or with EN-EL3 or EN-EL3a batteries for D100,
D70-series, or D50 cameras.
Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F). During
charging, the temperature should be in the vicinity of 5–35 °C (41–95 °F). For best results, charge the
battery at temperatures above 20 °C (68 °F). Battery capacity may drop if the battery is used at a temperature below the temperature at which it was charged. If the battery is charged at a temperature below 5 °C (41 °F), the battery life indicator in the Battery Info display may show a temporary decrease.
Removing the Battery
Turn the camera off before removing the battery. To avoid shorting the battery, replace the terminal
cover when the battery is not in use.
Introduction: First Steps
13
Basic Setup
The first time the camera is turned on, the language selection dialog shown in Step 1 will
be displayed in the monitor. Follow the steps below to choose a language and set the time
and date.
1
2
Turn camera on.
3
Select language.
4
Display map of world time zones.
5
Select local time zone.
6
Display daylight saving time options.
7
Highlight On if daylight saving time is in
effect.
8
Display date menu.
9
Press multi selector left or right to select item,
up or down to change.
To change the order in which the year, month,
and day are displayed, select World time > Date
format from the setup menu ( 103).
Set clock and return to shooting mode.
Monitor will turn off automatically.
Using Camera Menus
The language menu is only displayed automatically the first time menus are displayed. See “Using
Camera Menus” ( 9–10) for information on normal menu operation.
14
Introduction: First Steps
Inserting Memory Cards
The camera stores pictures on Secure Digital (SD) memory cards (available separately).
1 Insert a memory card.
1.1 Before inserting or removing memory cards, turn the camera off and open the card slot cover.
1.2 Slide the memory card in as shown at right until it clicks into
place. The memory card access lamp will light for about a
second. Close the memory card slot cover.
Front
1.3 Turn the camera on. If the control panel shows the number
of exposures remaining, the card is ready for use.
If the message shown at right is displayed in the monitor,
format the card as described in “Camera Error Messages
and Displays” ( 133).
The Access Lamp
Do not remove the battery or disconnect the power source while the memory card access lamp is lit.
Failure to observe this precaution could result in damage to the card.
The Write Protect Switch
SD cards are equipped with a write protect switch to prevent
accidental loss of data. When this switch is in the “lock” position,
the camera will display a message to warn that photos can not
be recorded or deleted and the memory card can not be formatted.
Introduction: First Steps
15
cards must be formatted the first time they are used in
2 Memory
the D80. To format the memory card, turn the camera on and
press the
( and ) buttons until control panel and viewfinder displays flash as shown at right. Pressing both buttons
together a second time will format the memory card. During
formatting, the letters
will appear in the frame-count
display. Do not turn the camera off or remove the battery until
formatting is complete, the monitor has turned off, and the control panel shows the number of exposures remaining.
Formatting Memory Cards
Format cards in the camera. Performance may drop if they are formatted in a computer.
Formatting memory cards permanently deletes all photographs and
other data they may contain. Be sure all data you wish to keep have
been copied to another storage device before formatting the card.
Removing Memory Cards
1. Confirm that the access lamp is off.
2. Turn the camera off and open the memory card slot cover.
3. Press the card in to eject (). The card can then be removed by hand
().
Camera Off Display
If the camera is turned off with a battery and memory card inserted, the
number of exposures remaining will be displayed in the control panel. If no
and a
icon
memory card is inserted, the control panel will show
will be displayed in the viewfinder.
16
Introduction: First Steps
Adjusting Viewfinder Focus
Photographs are framed in the viewfinder. Before shooting, make sure that the display in the
viewfinder is in clear focus.
Viewfinder Focus
Viewfinder focus (diopter) can be adjusted in the range –2 – +1 m-1. Corrective lenses (available separately; 122) allow diopters of –5 – +3 m -1.
1 Remove the lens cap and turn the camera on.
the diopter adjustment control until the focus brack2 Rotate
ets are in sharp focus. When operating the diopter adjustment
control with your eye to the viewfinder, be careful not to put
your fingers or fingernails in your eye.
Focus brackets
Introduction: First Steps
17
Tutorial
Photography and Playback
The Tutorial outlines the basics of taking and viewing photographs in
(auto) and Digital
Vari-Program modes. This section assumes that default camera settings are used; for information on restoring default settings, see page 134.
Use a CPU Lens
(auto) and Digital Vari-Program modes are only available with CPU lenses. If these modes are selected when a non-CPU lens is attached, the shutter release will be disabled.
Auto Meter Off
At default settings, the viewfinder display and the aperture and shutter-speed indicators in the control
panel will turn off if no operations are performed for about six seconds (auto meter off ), reducing the
drain on the battery. Press the shutter-release button halfway to reactivate the display.
6s
Exposure meters on
Exposure meters off
Exposure meters on
The length of time before the exposure meters turn off automatically can be adjusted using Custom
Setting 28 (Auto meter off; 99).
18
Tutorial
“Point-and-Shoot” Photography (
Mode)
This section describes how to take photographs in
(auto) mode, an automatic “pointand-shoot” mode in which the majority of settings are controlled by the camera in response
to shooting conditions.
1 Turn the camera on.
1.1 Remove the lens cap and turn the camera on. The control panel and viewfinder displays will light. The monitor
remains off during shooting.
1.2 Check the battery level in the viewfinder or control panel.
Control panel
Viewfinder
Description
—
Battery fully charged.
—
Battery partially discharged.
Low battery. Ready fully-charged spare battery.
(blinks)
(blinks)
Shutter release disabled. Change battery.
Battery level not displayed when camera is powered by optional AC adapter.
1.3 The exposure count displays in the control panel and viewfinder show the number of photographs that can be stored
on the memory card. Check the number of exposures remaining.
If there is not enough memory to store additional photographs at current settings, the display will flash as shown at
right. No further pictures can be taken until the memory
card has been replaced ( 15) or photographs have been
deleted ( 26, 65, 74).
Tutorial: “Point-and-Shoot” Photography (
Mode)
19
2 Select
mode and choose autofocus.
2.1 Rotate the mode dial to
.
2.2 Rotate the focus-mode selector to AF (autofocus).
3 Check settings in the control panel. The default settings for
Option
Flash sync mode
Image quality
Image size
Shooting mode
Autofocus mode
AF-area mode
20
Tutorial: “Point-and-Shoot” Photography (
Mode)
mode are listed below.
Default
Auto
JPEG Normal
Large
Single frame
Auto select
Auto-area AF
40
34
35
36
29
30
4 Frame a photograph in the viewfinder. The monitor remains off during shooting.
4.1 Hold the camera as shown.
Holding the Camera
Hold the handgrip in your right hand and cradle the camera body
or lens with your left. Keep your elbows propped lightly against
your torso for support and place one foot half a pace ahead of the
other to keep you upper body stable.
4.2 Frame a photo in the viewfinder with the main subject positioned in any of the eleven focus areas.
Focus area
Using a Zoom Lens
Zoom in
Use the zoom ring to zoom in on the subject so that it fills a larger area of the frame, or zoom out to increase the area visible in
the final photograph (select longer focal lengths on the lens focal length scale index to zoom in, shorter focal lengths to zoom
out).
Zoom out
Tutorial: “Point-and-Shoot” Photography (
Mode)
21
5 Focus.
5.1 Press the shutter-release button halfway to focus. The camera will select the focus area automatically. If the subject
is dark, the flash may pop up and the AF-assist illuminator
may light.
5.2 When the focus operation is complete, the selected focus areas will be briefly highlighted, a beep will sound, and the in-focus indicator (●) will appear in the viewfinder (the beep may not sound if the subject is moving). While the shutter-release
button is pressed halfway, focus will lock and the number of exposures that can be
stored in the memory buffer will be displayed in the viewfinder.
Shutter speed
Selected
focus area
Buffer
capacity
In-focus
indicator
Shutter speed
Aperture
Viewfinder
In-focus indicator
●
●
(blinks)
Aperture
Control panel
Description
Subject in focus.
Camera unable to focus on subject in focus area using autofocus.
The Shutter-Release Button
The camera has a two-stage shutter-release button. The camera focuses when the shutter-release
button is pressed halfway. To take the photograph, press the shutter-release button the rest of the
way down.
Focus
22
Tutorial: “Point-and-Shoot” Photography (
Mode)
Take photograph
6 Take the photograph.
Smoothly press the shutter-release button the rest of the way
down to release the shutter and record the photograph. The access lamp next to the memory card slot cover will light. Do not
eject the memory card or remove or disconnect the power source
until the lamp has gone out and recording is complete.
7 Turn the camera off when shooting is complete.
Camera Off Display
If the camera is turned off with a battery and memory card inserted, the
number of exposures remaining will be displayed in the control panel.
The Built-in Flash
If additional lighting is required for correct exposure in mode, the built-in
flash will pop up automatically when the shutter-release button is pressed
halfway. Flash range varies with aperture and ISO sensitivity ( 141); remove lens hoods when using the flash. If the flash is raised, photographs
can only be taken when the flash-ready indicator ( ) is displayed. If the
flash-ready indicator is not displayed, remove your finger briefly from the
shutter-release button and try again.
To save battery power when the flash is not in use, return it to its closed
position by pressing it gently downward till the latch clicks into place. For
more information on using the flash, see page 40.
Tutorial: “Point-and-Shoot” Photography (
Mode)
23
Creative Photography (Digital Vari-Programs)
In addition to , the D80 offers a choice of six Digital Vari-Program modes. Selecting a
program automatically optimizes settings to suit the selected scene, making creative photography as easy as rotating the mode dial.
Mode
Portrait
Landscape
Close up
Sports
Night landscape
Night portrait
Description
For portraits.
For natural and man-made landscapes.
For close up shots of flowers, insects, and other small objects.
For moving subjects.
For low-light or night scenes.
For portraits taken under low light.
To take photographs in Digital Vari-Program modes:
1 Rotate the mode dial to select a Digital Vari-Program mode.
2 Frame a photograph, focus, and shoot.
Focus Area
At default settings, the camera selects the focus area as follows:
• , , , and modes: The camera selects the focus area automatically.
•
mode: The camera focuses on the subject in the center focus area. Other focus areas can be selected with the multi selector ( 30).
• mode: The camera focuses continuously while the shutter-release button is pressed halfway, tracking the subject in the center focus area. If the subject leaves the center focus area, the camera will
continue to focus based on information from the other focus areas. The starting focus area can be
selected with the multi selector ( 30).
The Built-in Flash
If additional lighting is required for correct exposure in , , or
automatically when the shutter-release button is pressed halfway.
24
Tutorial: Creative Photography (Digital Vari-Programs)
mode, the built-in flash will pop
Portrait
Use for portraits with soft, natural-looking skin tones. If the subject is far
from the background or a telephoto lens is used, background details will
be softened to lend the composition a sense of depth.
Landscape
Use for vivid landscape shots. The built-in flash and AF-assist illuminator
turn off automatically.
Close Up
Use for close-up shots of flowers, insects, and other small objects. The
camera automatically focuses on the subject in the center focus area.
Use of a tripod is recommended to prevent blur.
Sports
High shutter speeds freeze motion for dynamic sports shots in which the
main subject stands out clearly. The built-in flash and AF-assist illuminator turn off automatically .
Night Landscape
Slow shutter speeds are used to produce stunning night landscapes. The
built-in flash and AF-assist illuminator turn off automatically; use of a tripod is recommended to prevent blur.
Night Portrait
Use for a natural balance between the main subject and the background
in portraits taken under low light.
Tutorial: Creative Photography (Digital Vari-Programs)
25
Basic Playback
Photographs are automatically displayed for about four seconds after shooting. If no photograph is displayed in the monitor, the most
recent picture can be viewed by pressing the
button. Additional
pictures can be displayed by rotating the main command dial or
pressing the multi selector left or right. Press the multi selector
up or down to view highlights or additional shooting information
about the current photograph ( 62–63).
To end playback and return to shooting mode, press the shutterrelease button halfway.
Deleting Unwanted Photographs
To delete the photograph currently displayed in the monitor, press
the
button. A confirmation dialog will be displayed. Press the
button again to delete the image and return to playback. To exit
without deleting the picture, press the
button.
26
Tutorial: Basic Playback
Reference
This section builds on the Tutorial to cover more advanced shooting and playback options.
More on Photography (All Modes):
28
Shoot a moving subject or focus manually
Adjust image quality and size
Take photographs in one at a time, in bursts, or
using the self-timer or a remote control
Use the built-in flash
Raise ISO sensitivity when lighting is poor
Restore default settings
P, S, A, and M Modes:
Focus:
28
Image Quality and Size:
33
Choosing a Shooting Mode:
36
Using the Built-in Flash:
40
ISO Sensitivity:
43
Two-Button Reset:
44
Mode P (Programmed Auto):
47
Mode S (Shutter-Priority Auto):
48
Mode A (Aperture-Priority Auto):
49
Mode M (Manual):
50
Exposure:
52
White Balance:
58
45
Let the camera choose shutter speed and aperture
Freeze or blur motion
Choose whether to blur background objects
Choose shutter speed and aperture manually
Choose a metering method, lock exposure, adjust
exposure and flash level
Make colors look natural
Take photos under unusual lighting
See the Menu Guide for information on other operations that can only be performed in P, S, A, and M
modes, including customizing sharpening, contrast, color saturation, and hue (“Optimize Image”;
79) and creating multiple exposures (“Multiple Exposure”; 84).
More on Playback:
61
View photographs on the camera
See the Menu Guide for other playback options (
Connecting to a TV, Computer, or Printer:
View photographs on TV
Copy photographs to a computer
Print photographs
Viewing Photographs on the Camera:
61
Viewing Photographs on TV:
66
Connecting to a Computer:
67
Printing Photographs:
69
74).
66
Reference
27
More on Photography (All Modes)
Focus
Focus can be adjusted automatically (see “ Autofocus,” below) or manually ( 32). The user
can also select the focus area for automatic or manual focus ( 30) or use focus lock to focus
to recompose photographs after focusing ( 31).
Autofocus
Controls used: Focus mode selector
When the focus mode selector is set to AF, the camera focuses automatically when the shutter-release button is pressed halfway. In
single-area AF, a beep will sound when the camera focuses. No
beep will sound when AF-A is selected in (sports) mode or when
continuous-servo autofocus is used (note that continuous-servo
autofocus may be selected automatically when shooting moving
subjects in AF-A autofocus mode).
If the lens does not support autofocus or the camera is unable to focus using autofocus, use
manual focus ( 32).
A-M Selection/Autofocus with Manual Priority
If the lens is equipped with A-M selection or an M/A-M switch, select A
(autofocus) or M/A (autofocus with manual priority).
The AF-Assist Illuminator
If the subject is poorly lit, the AF-assist illuminator will light automatically to
assist the autofocus operation when the shutter-release button is pressed
halfway. The AF-assist illuminator will not light in , , or
modes or if
Off has been selected for Custom Setting 4 (AF assist; 87). The illuminator has a range of about 0.5–3.0 m (1 ft. 8 in.–9 ft. 10 in.); when using the
illuminator, use a lens with a focal length of 24–200 mm and remove the
lens hood.
1 — Beep ( 86)
This option can be used to turn the beep speaker on or off.
28
Reference: More on Photography (All Modes) / Focus
Autofocus Mode
Controls used:
button
The following autofocus modes are available when the focus mode selector is set to AF:
Autofocus mode
Description
Camera automatically selects single-servo autofocus when subject is staAuto select
AF-A
tionary, continuous-servo autofocus when subject is moving. Shutter can
(default setting)
only be released if camera is able to focus.
For stationary subjects. Focus locks when shutter-release button is pressed
AF-S Single-servo AF
halfway. Shutter can only be released when in-focus indicator is displayed.
For moving subjects. Camera focuses continuously while shutter-release
Continuous-servo
AF-C
button is pressed halfway. Photographs can be taken even when in-focus
AF
indicator is not displayed.
To choose the autofocus mode, press the
setting is displayed.
button until the desired
AF-A
AF-C
AF-S
Getting Good Results with Autofocus
Autofocus does not perform well under the conditions listed below. The shutter release may be disabled if the camera is unable to focus under these conditions, or the in-focus indicator (●) may be displayed and the camera may sound a beep, allowing the shutter to be released even when the subject
is not in focus. In these cases, use manual focus ( 32) or use focus lock ( 31) to focus on another
subject at the same distance and then recompose the photograph.
There is little or no contrast
The focus area contains obbetween the subject and the
jects at different distances
background
from the camera
Example: Subject is the same color as the background.
Example: Subject is inside a cage.
The subject is dominated by
regular geometric patterns
The focus area contains areas
of sharply contrasting brightness
Example: A row of windows in a skyscraper.
Example: Subject is half in the shade.
The subject appears smaller
than the focus area
The subject contains many
fine details
Example: Focus area contains both foreground Example: A field of flowers or other subjects that
subject and distant buildings.
are small or lack variation in brightness.
Reference: More on Photography (All Modes) / Focus
29
Focus Area Selection
Controls used: Multi selector (monitor off )
The D80 offers a choice of eleven focus areas that together cover a wide area of the frame. At
the default settings, the camera chooses the focus area automatically or focuses on subject
in the center focus area. The focus area can also be selected manually to compose photographs with the main subject positioned almost anywhere in the frame.
settings, the focus area is selected automatically in
1 At ,default
, , , and
modes. To enable manual focus selection in these modes, select Single Area or Dynamic Area for
Custom Setting 2 (AF-Area Mode; 87).
Slide the focus selector lock to the “●” position. This allows the
2 multi
selector to be used to select the focus area.
the multi selector to select the focus area in the viewfinder
3 orUsecontrol
panel while the exposure meters are active ( 18).
The focus selector lock can be returned to the “L” (locked) position following selection to prevent the selected focus area
from changing when the multi selector is pressed.
Custom Settings
Custom Setting 2 (AF-Area Mode; 87) controls how the camera selects the focus area. Custom
Setting 3 (Center AF Area; 87) controls the size and number of focus areas available. Custom Setting 18 (AE-L/AF-L; 94) determines allows the AE-L/AF-L button to be used to select the focus area.
Custom Setting 20 (Focus Area; 94) controls whether focus area selection “wraps around.” Custom
Setting 21 (AF Area Illumination; 95) controls whether the active focus area is highlighted in the
viewfinder.
30
Reference: More on Photography (All Modes) / Focus
Focus Lock
Controls used: AE-L/AF-L button (AF-A/AF-C)/Shutter-release button (AF-S)
Focus lock can be used to change the composition after focusing, making it possible to focus on a subject that will not be in a focus area in the final composition. It can also be used
when the autofocus system is unable to focus ( 29).
the subject in the selected focus area and press the
1 Position
shutter-release button halfway to initiate focus.
2 Check that the in-focus indicator (●) appears in the viewfinder.
AF-A and AF-C autofocus modes ( 29)
Press the AE-L/AF-L button to lock both focus and exposure.
Focus will remain locked while the AE-L/AF-L button is pressed,
even if you later remove your finger from the shutter-release
button.
AF-S autofocus modes ( 29)
Focus will lock automatically when the in-focus indicator appears, and remain locked
until you remove your finger from the shutter-release button. Focus can also be
locked by pressing the AE-L/AF-L button (see below).
An AE-L icon will be displayed in the viewfinder.
3 Recompose the photograph and shoot.
Focus will remain locked between shots as long as the shutter-release button is kept pressed
halfway, allowing several photographs in succession to be taken at the same focus setting.
Focus will also remain locked between shots while the AE-L/AF-L button is pressed.
Do not change the distance between the camera and the subject while focus lock is in effect. If the subject moves, focus again at the new distance.
Continuous Shooting Mode ( 36)
Use the AE-L/AF-L button to lock focus in continuous shooting mode.
18 — AE-L/AF-L ( 94)
This option controls the behavior of the AE-L/AF-L button.
Reference: More on Photography (All Modes) / Focus
31
Manual Focus
Controls used: Focus mode selector/lens focusing ring
Manual focus is available for lenses that do not support autofocus
(non-AF Nikkor lenses) or when autofocus does not produce the
desired results ( 29). To focus manually, set the focus-mode selector to M and adjust the lens focusing ring until the image displayed
on the clear matte field in the viewfinder is in focus. Photographs
can be taken at any time, even when the image is not in focus.
When using a lens that offers A-M selection, select M when focusing manually. With lenses
that support M/A (autofocus with manual priority), focus can be adjusted manually with the
lens set to M or M/A. See the documentation provided with your lens for details.
The Electronic Rangefinder
If the lens has a maximum aperture of f/5.6 or faster, the viewfinder focus
indicator can be used to confirm whether the portion of the subject in the
selected focus area is in focus. After positioning the subject in the active
focus area, press the shutter-release button halfway and rotate the lens focusing ring until the in-focus indicator (●) is displayed. Note that if the subject is one for which autofocus does not perform well ( 29), the in-focus
indicator may be displayed when the subject is not in focus. Confirm that
the image in the viewfinder is in focus before shooting.
Focal Plane Position
To determine the distance between your subject and the camera, measure
from the focal plane mark on the camera body. The distance between the
lens mounting flange ( 11) and the focal plane is 46.5 mm (1.83 in.).
32
Reference: More on Photography (All Modes) / Focus
Image Quality and Size
Together, image quality and size determine how much space each photograph occupies on
the memory card. Larger, higher quality images can be printed at larger sizes but also require more memory, meaning that fewer such images can be stored on the memory card.
le
efi
g
r
e
La siz
Image Quality and Size
High < Image quality > Low
JPEG Fine
JPEG Normal
JPEG Basic
le
ll fi
a
Sm size
S
M
L
Small < Image size > Large
Changes to image quality and size are reflected in the number of exposures remaining as
displayed in the control panel and viewfinder ( 19).
Image Quality, Image Size, and File Size
See the Appendix for information on the number of pictures that can be stored on a memory card (
138).
Reference: More on Photography (All Modes) / Image Quality and Size
33
Image Quality
Controls used:
button + main command dial (monitor off )
The camera supports the following image quality options (listed in descending order by image quality and file size):
Option
Description
Compressed raw data from the image sensor are saved directly to memory card.
NEF (RAW)
Choose for images that will be processed on a computer.
Images are compressed less than JPEG Normal, producing higher-quality images.
JPEG Fine
Compression ratio: roughly 1 : 4.
JPEG Normal
Best choice in most situations. Compression ratio: roughly 1 : 8.
(default)
JPEG Basic Smaller file size suited to e-mail or the Web. Compression ratio: roughly 1 : 16.
NEF (RAW) +
Two images are recorded: one NEF (RAW) image and one fine-quality JPEG image.
JPEG Fine
NEF (RAW) + Two images are recorded: one NEF (RAW) image and one normal-quality JPEG imJPEG Normal age.
NEF (RAW) +
Two images are recorded: one NEF (RAW) image and one basic-quality JPEG image.
JPEG Basic
Image quality can be set by pressing the QUAL button and rotating
the main command dial until the desired setting is displayed in the
control panel. Image quality can also be adjusted from the shooting menu ( 81).
NEF (RAW)/NEF+JPEG
Capture NX (available separately;
123) or the supplied ViewNX software are required to view NEF
(RAW) images on a computer. ViewNX can be installed from the supplied Software Suite CD-ROM.
When photographs taken at NEF (RAW) + JPEG Fine, NEF (RAW) + JPEG Normal, or NEF (RAW)
+ JPEG Basic are viewed on the camera, only the JPEG image will be displayed. When photographs
taken at these settings are deleted, both NEF and JPEG images will be deleted.
White balance bracketing ( 90) is not available when an NEF (RAW) + JPEG option is selected for image quality. Selecting an NEF (RAW) + JPEG option cancels white balance bracketing.
34
Reference: More on Photography (All Modes) / Image Quality and Size
Image Size
Controls used:
button + sub-command dial (monitor off )
Image size is measured in pixels. The following options are available.
Image size
Large (3872 × 2592/10.0 M)
(default)
Medium (2896 × 1944/5.6 M)
Small (1936 × 1296/2.5 M)
Size (pixels)
Approximate size when printed at 200 dpi*
3,872 × 2,592
49.2 × 32.9 cm (19.36 × 12.96 in.)
2,896 × 1,944
1,936 × 1,296
36.8 × 24.7 cm (14.48 × 9.72 in.)
24.6 × 16.5 cm (9.68 × 6.48 in.)
* “dpi” stands for dots per inch, a measure of printer resolution. Images printed at higher resolutions
will be smaller, images printed at lower resolutions larger.
Image size can be set by pressing the QUAL button and rotating the sub-command dial until
the desired setting is displayed in the control panel. Image quality can also be adjusted from
the shooting menu ( 81).
Note that the option selected for image size does not affect the size of NEF (RAW) images.
When viewed on a computer, NEF images are 3,872 × 2,592 pixels in size.
File Names
Photographs are stored as image files with names of the form “DSC_nnnn.xxx,” where nnnn is a fourdigit number between 0001 and 9999 assigned automatically in ascending order by the camera, and
xxx is one of the following three letter extensions: “NEF” for NEF images or “JPG” for JPEG images. The
NEF and JPEG files recorded at a setting of “NEF+JPEG” have the same file names but different extensions. Small copies created with the small picture option in the retouch menu have file names beginning with “SSC_” and ending with the extension “.JPG” (e.g., “SSC_0001.JPG”), while images recorded
with the other options in the retouch menu have file names beginning with “CSC” (e.g., “CSC_0001.
JPG”). Images recorded at a Optimize Image > Custom > Color Mode setting of II (AdobeRGB) (
80) have names that begin with an underscore (e.g., “_DSC0001.JPG”).
Reference: More on Photography (All Modes) / Image Quality and Size
35
Choosing a Shooting Mode
Controls used:
button
Shooting mode determines how the camera takes photographs: one at a time, in a continuous sequence, with a timed shutter-release delay, or with a remote control.
Mode
Single frame
Continuous
Self-timer
Description
Camera takes one photograph each time shutter-release button is pressed.
Access lamp will light while photo is recorded; next shot can be taken immediately if enough space remains in memory buffer.
Camera records photographs at up to three frames per second 1 while shutter-release button is pressed.
Use for self-portraits or to reduce blurring caused by camera shake ( 37).
Delayed remote Optional ML-L3 remote control required. Use for self-portraits (
38).
Quick-response Optional ML-L3 remote control required. Use to reduce blurring caused by
remote
camera shake ( 38).
1. Average frame rate with manual focus, manual or shutter-priority auto exposure, a shutter speed of
/ s or faster, and memory remaining in memory buffer.
To choose a shooting mode, press the
button until the desired setting is displayed.
Buffer Size
The number of images that can be stored in the memory buffer at current settings is shown in the exposure-count displays in the viewfinder and
control panel while the shutter-release button is pressed. This number is
updated as photographs are transferred to the memory card and more
memory becomes available in the buffer. If 0 is displayed, the buffer is full
and shooting will slow. Shooting can continue up to a maximum of 100
shots. See the Appendix for more information ( 138).
While photographs are being recorded to the memory card, the access lamp next to the memory card
slot will light. Do not remove the memory card or remove or disconnect the power source until the access
lamp has gone out. If the camera is switched off while data remain in the buffer, the power will not turn
off until all images in the buffer have been recorded.
36
Reference: More on Photography (All Modes) / Choosing a Shooting Mode
Self-Timer Mode ( )
The self-timer can be used to reduce camera shake or for self-portraits.
1 Mount the camera on a tripod or place the camera on a stable, level surface.
2 Press the button until is displayed in the control panel.
the photograph. Before taking a photograph with the flash in P, S, A, or M modes
3 (Frame
45), press the button to raise the flash and wait for the indicator to be displayed
in the viewfinder (
started.
40). The timer will stop if the flash is raised after the timer has
other than M, remove the viewfinder eyepiece cup
4 Inandmodes
insert the supplied DK-5 eyepiece cap as shown. This prevents light entering via the viewfinder interfering with exposure.
Press the shutter-release button halfway to focus, and then
5 press
the button the rest of the way down to start the self-timer. The self-timer lamp will start to blink and a beep will begin
to sound. Two seconds before the photograph is taken, the
self-timer lamp will stop blinking and the beeping will become
more rapid. At default settings, the shutter will be released ten
seconds after the timer starts.
The timer will not start if the camera is unable to focus or in other situations in which the
shutter can not be released.
The self-timer can be cancelled by selecting another shooting mode. Turning the camera off
cancels self-timer mode and restores single frame or continuous shooting mode.
Bulb
In self-timer mode, a shutter speed of
is equivalent to approximately / s.
1 — Beep ( 86)
This option controls the beep that sounds during the self-timer count-down.
29 — Self-timer ( 99)
Self-timer delay can be set to 2 s, 5 s, 10 s (the default setting), or 20 s.
Reference: More on Photography (All Modes) / Choosing a Shooting Mode
37
Using a Remote Control ( )
Use the optional ML-L3 remote control for self-portraits (
remotely.
123) or to operate the camera
Before Using the Remote Control
Before using the remote control for the first time, remove the clear plastic battery insulator sheet.
1 Mount the camera on a tripod or place the camera on a stable, level surface.
2 Press the button to select one of the following modes:
Mode
Shutter released about 2 s after remote shutter-release button is pressed.
Quick-response Shutter released when remote shutter-release
remote
button is pressed.
Delayed remote
The camera will enter stand-by mode. At default settings, single frame or continuous
shooting mode will be restored if no operations are performed for about a minute.
the photograph. If autofocus is in effect, the camera shutter-release button can
3 Frame
be used to set focus, although only the shutter-release button on the remote control
can be used to release the shutter.
other than M, remove the viewfinder eyepiece cup
4 Inandmodes
insert the supplied DK-5 eyepiece cap as shown. This prevents light entering via the viewfinder interfering with exposure.
the transmitter on the ML-L3 at the infrared receiver on the
5 Aim
camera and press the shutter-release button on the ML-L3. In
delayed remote mode, the self-timer lamp will light for about
two seconds before the shutter is released. In quick-response
remote mode, the self-timer lamp will flash after the shutter has
been released. If AF-A or AF-S is selected in autofocus mode
( 29), the camera will return to stand-by mode without releasing the shutter if unable
to focus. The camera will release the shutter without focusing in manual focus mode,
if AF-C is selected in autofocus mode, or if the camera has already been focused using
the camera shutter-release button (see step 3).
Remote control mode can be cancelled by selecting another shooting mode. Single-frame
or continuous shooting mode will be restored if the camera is turned off or no operations
are about one minute.
38
Reference: More on Photography (All Modes) / Choosing a Shooting Mode
Using the Built-in Flash
If the flash is required, the camera will only respond to the shutter-release button on the ML-L3 once
the flash has charged. In , , , and modes, the flash will begin charging when delayed remote
or quick-response remote mode is selected; once the flash is charged, it will pop up automatically if
required when the shutter-release button on the ML-L3 is pressed. In P, S, A, and M modes, raising the
flash during the two-second count-down in delayed remote mode will cancel the two-second timer.
Wait for the flash to charge and then press the shutter-release button on the ML-L3 to restart the
timer.
In flash-sync modes that support red-eye reduction, the red-eye reduction lamp will light for about
one second before the shutter is released. In delayed remote mode, the self-timer lamp will blink for
two seconds and then light for one second before the shutter is released.
1 — Beep ( 86)
This option controls the beeps that sound when the remote control is used.
30 — Remote on Duration ( 99)
Choose length of time the camera will remain in stand-by before remote control mode is cancelled.
Reference: More on Photography (All Modes) / Choosing a Shooting Mode
39
Using the Built-in Flash
The camera supports a variety of flash modes for photographing poorly lit or backlit subjects.
Using the Built-in Flash:
,
,
, and
Modes
1 Rotate the mode dial to select the desired mode.
Press the button and rotate until the desired flash mode is displayed in the control
2 panel
( 41).
Take pictures. The flash will pop up as required when the shutter-release button is
3 pressed
halfway, and fire when a photograph is taken.
Using the Built-in Flash: P, S, A, and M Modes
1 Rotate the mode dial to select the desired mode.
2 Press the
button to raise the flash.
Press the button and rotate until the desired flash mode is displayed in the control
3 panel
( 41).
4 Select a metering method and set exposure.
5 Take pictures. The flash will fire whenever a picture is taken.
Lowering the Built-in Flash
To save power when the flash is not in use, press it gently downward until the latch clicks into place.
40
Reference: More on Photography (All Modes) / Using the Built-in Flash
Flash Mode
The current flash mode is displayed in the control panel as shown below.
is displayed when the flash is off.
: Red-eye reduction
Use for portraits. Red-eye reduction lamp lights before flash fires, reducing “red-eye.”
: Off
Flash does not fire even when lighting is poor or subject is back-lit.
AUTO: Auto flash
When lighting is poor or subject is back lit, flash pops up automatically when
shutter-release button is pressed halfway and fires as required. If this icon is not
displayed, flash will only pop up when button is pressed.
SLOW: Slow sync
Shutter speed slows automatically to capture background lighting at night or
under low light. Use to include background lighting in portraits.
REAR: Rear-curtain sync
Flash fires just before shutter closes (see note on following page). If this icon is
not displayed, flash will fire immediately after shutter opens.
The flash modes available depend on the mode currently selected with the mode dial.
,
,
Auto
Auto+
red-eye
reduction
Auto+Slow sync
Off
Off
P, A
Fill flash
Red-eye
reduction
Slow sync+
red-eye
reduction
Auto+
Slow sync+
red-eye
reduction
S, M
Rearcurtain+
slow sync *
Fill flash
Red-eye
reduction
Rear-curtain
sync
Slow sync
* SLOW is displayed after main command dial is released.
Reference: More on Photography (All Modes) / Using the Built-in Flash
41
The Built-in Flash
Use with CPU lenses with focal lengths of 18–300 mm or non-CPU lenses with focal lengths of
18–200 mm ( 118; note that auto flash level control is available with CPU lenses only). Remove lens
hoods to prevent shadows. Lenses that block the subject’s view of the red-eye reduction lamp may
interfere with red-eye reduction. The flash has a minimum range of 60 cm (2 ft.) and can not be used
in the macro range of macro zoom lenses.
If the flash fires in continuous shooting mode (
shutter-release button is pressed.
36), only one picture will be taken each time the
The shutter release may be briefly disabled to protect the flash after it has been used for several consecutive shots. The flash can be used again after a short pause.
See the Appendix for more about the built-in flash, including flash control, shutter sync speeds, and
range. For information on optional flash units (Speedlights), see “Optional Flash Units (Speedlights)” (
119). See “FV Lock” for information using FV lock ( 92).
Rear-Curtain Sync
Normally the flash fires as the shutter opens (“front-curtain sync”; see below at left). In rear-curtain
sync, the flash fires just before the shutter closes, creating the effect of a stream of light behind moving
subjects.
Front-curtain sync
Rear-curtain sync
22 — Built-in Flash ( 95)
Choose how the built-in flash fires.
26 — Modeling Flash ( 98)
Preview the effects of the flash.
42
Reference: More on Photography (All Modes) / Using the Built-in Flash
ISO Sensitivity
Controls used:
button + main command dial (monitor off )
“ISO sensitivity” is the digital equivalent of film speed. The higher the ISO sensitivity, the less
light needed to make an exposure, allowing higher shutter speeds or smaller apertures.
ISO sensitivity can be set between values roughly equivalent to ISO 100 and ISO 1600 in
steps equivalent to / EV. Values over 1600 are displayed as H 0.3 (ISO 2000 equivalent), H
(auto) and Digital Vari-Pro0.7 (ISO 2500 equivalent), and H 1.0 (ISO 3200 equivalent).
gram modes also offer an Auto setting that allows the camera to set ISO sensitivity automatically in response to lighting conditions. The default setting for
(auto) and Digital
Vari-Program modes is Auto, the default setting for P, S, A, and M modes 100.
ISO sensitivity can be selected by pressing the ISO button and rotating the main command
dial until the desired setting is displayed in the control panel. ISO sensitivity can also be
adjusted from the shooting menu ( 83).
High ISO NR ( 83)
The higher the ISO sensitivity, the more likely pictures are to be subject to “noise” in the form of randomly-spaced, brightly-colored pixels. Photos taken at ISO sensitivities over ISO 1600 will likely contain
appreciable amounts of noise. The High ISO NR option in the shooting menu can be used to reduce
noise at ISO sensitivities of 400 or more.
7 — ISO Auto ( 88)
This option can be used to enable automatic ISO sensitivity control in P, S, A, and M modes. Sensitivities
of H 0.3, H 0.7, and H 1.0 are not available when ISO auto is on.
Reference: More on Photography (All Modes) / ISO Sensitivity
43
Two-Button Reset
Controls used:
button +
button
The camera settings listed below can be restored to default values
by holding the
and buttons down together for more than
two seconds (these buttons are marked by a green dot). The control panel turns off briefly while settings are reset. Custom Settings
are not affected.
Option
Shooting mode
( 36–39)
Image quality ( 34, 81)
Image size ( 35, 81)
ISO sensitivity ( 43, 83)
, Digital Vari-Program
P, S, A, M
Default
Single frame
JPEG Normal
Large
Auto
100
White balance
Auto
( 58–60, 82) *
Autofocus mode ( 29)
AF-A
Focus area ( 30) †
Center
Metering ( 52)
Matrix
Off
AE lock hold ( 53)
* Fine-tuning reset to 0, Choose color temp. reset to 5000 K.
† Focus area not displayed if Auto-area AF is selected for Custom Setting 2 (AF-area mode).
Default Settings
See the Appendix for a list of default settings (
44
Option
Flexible program ( 47)
Exposure
compensation ( 54)
Bracketing
( 56–57)
Flash exposure
compensation ( 55)
FV lock ( 92–93)
Flash sync mode ( 40–42)
,
,
Default
Off
±0
±0 ‡
±0
Off
Auto front-curtain
sync
Auto slow sync
P, S, A, M
Front-curtain sync
Multiple exposure
Off
( 84–85)
‡ Number of shots reset to zero. Bracketing increment reset to 1 EV (exposure/flash bracketing)
or 1 (white balance bracketing).
134–137).
Reference: More on Photography (All Modes) / Two-Button Reset
P, S, A, and M Modes
P, S, A, and M modes offer control over a variety of advanced settings, including exposure (
52), white balance, and image optimization. Each of these modes offers a different degree
of control over shutter speed and aperture:
Mode
Description
Camera sets shutter speed and aperture for optimal exposure. RecomProgrammed auto
P
mended for snapshots and in other situations in which there is little
( 47)
time to adjust camera settings.
Shutter-priority auto
User chooses shutter speed; camera selects aperture for best results.
S
( 48)
Use to freeze or blur motion.
User chooses aperture; camera selects shutter speed for best results.
Aperture-priority auto
A
Use to blur background or bring both foreground and background into
( 49)
focus.
User controls both shutter speed and aperture. Set shutter speed to
M Manual ( 50)
“bulb” or “--” for long time-exposures.
Lens Aperture Ring
When using a CPU lens equipped with an aperture ring ( 117), lock the aperture ring at the minimum aperture (highest f-number). Type G lenses are not equipped with an aperture ring.
Non-CPU lenses can only be used in exposure mode M, when aperture can be adjusted manually using
the lens aperture ring (in other modes, the shutter-release will be disabled). The camera exposure meter, ISO Auto, and variety of other features can not be used ( 117).
Custom Settings
Use Custom Setting 7 (ISO auto; 88) to enable auto ISO sensitivity control in P, S, A, and M modes.
Custom Setting 10 (EV step; 89) determines the size of the increments used for exposure control.
Custom Setting 15 (Command Dials; 91) determines the roles played by the main and sub-command dials in setting shutter speed and aperture.
Reference: P, S, A, and M Modes
45
Exposure
The exposure (brightness) of photographs is determined by the amount of light that falls on the image
sensor (CCD) while the shutter is open. Two factors that determine exposure are shutter speed and
aperture.
Aperture refers to the size of the opening through which the light passes. The larger the aperture, the
greater the amount of light that passes through the opening and the brighter the exposure. Smaller
apertures mean less light and darker exposures. The camera displays show aperture in “f-numbers”: the
larger the f-number, the smaller the aperture.
Shutter speed determines how long the shutter is open. The slower the shutter speed, the longer the
image sensor is exposed to light and the brighter the exposure. Faster shutter speeds mean that the
image sensor is exposed to light for less time, producing darker exposures.
The relationship between shutter speed and aperture can be likened to filling a cup from a tap. In
this analogy, the amount of water needed to fill the cup is the amount of light needed for optimal
exposure. If the cup overflows, the picture will be overexposed. If the cup doesn’t fill, the picture will
be underexposed. The amount the tap is opened is the aperture, and the length of time the tap is
opened the shutter speed. Open up the tap and the cup will fill in less time; tighten the tap and more
time will be needed to fill the cup.
Just as a cup can be filled in different times using different tap settings, different combinations of
shutter speed and aperture can be used to produce the same exposure. The results, however, will be
very different: fast shutter speeds and larger apertures freeze moving objects and soften background
details, while slow shutter speeds and small apertures blur moving objects and bring out background
details.
Fast shutter speed (/ s)
Slow shutter speed (1 s)
Small aperture (f/36)
Large aperture (f/3)
(Remember, the larger the f-number, the
smaller the aperture.)
46
Reference: P, S, A, and M Modes
Mode P (Programmed Auto)
In this mode, the camera automatically adjusts shutter speed and aperture for optimal exposure in most situations. This mode is recommended for snapshots and other situations in
which you want to leave the camera in charge of shutter speed and aperture.
To take photographs in programmed auto:
1 Rotate the mode dial to P.
2 Frame a photograph, focus, and shoot.
Flexible Program
In mode P, different combinations of shutter speed and aperture can be selected by rotating the main command dial (“flexible program”). Rotate the
main command dial to the right for large apertures (small f-numbers) that
blur background details or fast shutter speeds that “freeze” motion. Rotate
the main command dial to the left for small apertures (large f-numbers)
that increase depth of field or slow shutter speeds that blur motion. All
combinations produce the same exposure. While flexible program is in effect, a indicator appears in the control panel. To restore default shutter
speed and aperture settings, rotate the main command dial until the indicator is no longer displayed, choose another mode, or turn the camera off.
Shutter speed: / s
Aperture: f/8
Shutter speed: / s
Aperture: f/2.8
(Large aperture)
The exposure program for mode P is given in the Appendix (
139).
Reference: P, S, A, and M Modes / Mode P (Programmed Auto)
47
Mode S (Shutter-Priority Auto)
In shutter-priority auto, you choose the shutter speed from values between 30 s and / s
while the camera automatically selects the aperture that will produce the optimal exposure. Use slow shutter speeds to suggest motion by blurring moving subjects, high shutter
speeds to “freeze” motion.
To take photographs in shutter-priority auto:
1 Rotate the mode dial to S.
2 Rotate the main command dial to choose the desired shutter speed.
3 Frame a photograph, focus, and shoot.
Shutter speed: / s
Shutter speed: 1 s
Flashing Shutter-Speed Display
See “Camera Error Messages and Displays” ( 132) for information on what to do if flashing “
“
” indicators appear in the shutter-speed displays.
48
Reference: P, S, A, and M Modes / Mode S (Shutter-Priority Auto)
” or
Mode A (Aperture-Priority Auto)
In aperture-priority auto, you choose the aperture from values between the minimum and
maximum for the lens while the camera automatically selects the shutter speed that will
produce the optimal exposure. Small apertures (high f-numbers) increase depth of field,
bringing both the main subject and background into focus. Large apertures (low f-numbers) soften background details.
To take photographs in aperture-priority auto:
1 Rotate the mode dial to A.
2 Rotate the sub-command dial to choose the desired aperture.
3 Frame a photograph, focus, and shoot.
Depth of Field
“Depth of field” is the distance to which objects behind and in front of the focus point appear to be in
focus. Large apertures (low f-numbers) reduce depth of field, blurring objects behind and in front of
the main subject. Small apertures (high f-numbers) increase depth of field, bringing out details in the
background and foreground (note that depth of field is also influenced by other factors, such as focal
length and focus distance). Short field depths are generally used in portraits to blur background details, long field depths in landscape photographs to bring the foreground and background into focus.
To preview depth of field, press and hold the depth-of-field preview button. The lens will be stopped down to the current aperture value, allowing
depth of field to be previewed in the viewfinder.
Reference: P, S, A, and M Modes / Mode A (Aperture-Priority Auto)
49
Mode M (Manual)
In manual exposure mode, you control both shutter speed and aperture. Shutter speed can
be set to values between 30 s and / s, or the shutter can be held open for indefinitely
for longer exposures (
). Aperture can be set to values between the minimum and
maximum values for the lens.
To take photographs in manual exposure mode:
1 Rotate the mode dial to M.
the main command dial to choose a shutter speed, and the sub-command dial to
2 Rotate
set aperture. Check exposure in the electronic analog exposure displays (see below).
3 Frame a photograph, focus, and shoot.
Shutter speed: / s, Aperture: f/4.5
Electronic Analog Exposure Display
is selected, the electronic analog exIf a CPU lens is attached and a shutter speed other than
posure displays in the control panel and viewfinder show whether the photograph would be under- or
over-exposed at current settings. Depending on the option chosen for Custom Setting 10 (EV step;
89), the amount of under- or over-exposure is shown in increments of / EV or ⁄ EV. If the limits of
the exposure metering system are exceeded, the displays will flash.
EV Step set to “1/3 step”
EV Step set to “1/2 step”
Optimal exposure
50
Underexposed by / EV
Underexposed by / EV
Overexposed by more than 2 EV
Overexposed by more than 3 EV
Reference: P, S, A, and M Modes / Mode M (Manual)
Long Time-Exposures
Shutter speeds of “bulb” and “--” can be used for long time-exposure photographs of moving
lights, the stars, night scenery, or fireworks. To prevent blurring caused by camera shake, use
a tripod and an optional remote control ( 123) or remote cord ( 123).
Shutter speed
Description
Shutter remains open while the shutter-release button is held down.
Optional ML-L3 remote control required ( 123). Select mode M, choose a shutter
speed of “bulb,” and then select delayed remote or quick-response remote mode
( 38). Shutter opens when the shutter-release button on the remote control is
pressed and until the button is pressed a second time or remains open for thirty
minutes.
Shutter speed: 35 s, Aperture: f/25
To prevent loss of power before the exposure is complete, use a fully charged battery or an
optional AC adapter. Note that noise may be present in long exposures; before shooting,
choose On for the Long exp. NR option in the shooting menu ( 83).
Reference: P, S, A, and M Modes / Mode M (Manual)
51
Exposure
Metering
Controls used:
button + main command dial
The metering method determines how the camera sets exposure. The following options
are available:
Method
Description
Recommended in most situations. Camera meters a wide area of the frame
3D Color Matrix II and sets exposure according to distribution of brightness, color, distance,
and composition for natural results.
Camera meters entire frame but assigns greatest weight to center area.
Center-weighted Classic meter for portraits; recommended when using filters with an exposure factor (filter factor) over 1 × ( 122).
Camera meters circle 3.5 mm (0.14 in.) in diameter (approximately 2.5 % of
frame). Circle is centered on current focus area, making it possible to meter
off-center subjects (if non-CPU lens is used or if Auto-area AF is selected
Spot
for Custom Setting 2 ( 87), camera will meter center focus area). Ensures
that subject will be correctly exposed, even when background is much
brighter or darker.
To choose a metering method, press the
the desired mode is displayed.
button and rotate the main command dial until
12—Center Weight ( 90)
This option controls the size of the area assigned the greatest weight in center-weighted metering.
The default is 8mm (0.31in.).
3D Color Matrix II Metering
In matrix metering, exposure is set using a 420-segment RGB sensor. Use a type G or D lens for results
that include range information (3D color matrix metering II; 117). With other CPU lenses, 3D range
information is not included (color matrix metering II).
52
Reference: P, S, A, and M Modes / Exposure
Autoexposure Lock
Controls used: AE-L/AF-L button
Use auto exposure lock to recompose photographs after metering exposure:
Select mode P, S, or A and choose center-weighted or spot metering (exposure lock has
1 no
effect in mode M, while and Digital Vari-Program modes are not recommended as
center-weighted and spot metering are not available in these modes). If using centerweighted metering, select the center focus area with the multi selector ( 30).
the subject in the selected focus area and press the
2 Position
shutter-release button halfway. With the shutter-release button pressed halfway and the subject positioned in the focus
area, press the AE-L/AF-L button to lock exposure.
While exposure lock is in effect, an AE-L indicator will appear in
the viewfinder.
Keeping the AE-L/AF-L button pressed, recompose the photo3 graph
and shoot.
Adjusting Shutter Speed and Aperture
While exposure lock is in effect, the following settings can be adjusted without altering the metered
value for exposure.
Mode
Programmed auto
Shutter-priority auto
Aperture-priority auto
Setting
Shutter speed and aperture (flexible program;
Shutter speed
Aperture
47)
The new values can be confirmed in the viewfinder and control panel. Note that the metering method
can not be changed while exposure lock is in effect (changes to metering take effect when the lock
is released).
18 — AE-L/AF-L ( 94)
This option controls the behavior of the AE-L/AF-L button.
19 — AE Lock ( 94)
This option controls whether the shutter-release button locks exposure.
Reference: P, S, A, and M Modes / Exposure
53
Exposure Compensation
Controls used:
button + main command dial
Exposure compensation is used to alter exposure from the value suggested by the camera,
making pictures brighter or darker. It is most effective when used with center-weighted or
spot metering ( 52).
Exposure compensation is available in modes P, S, and A (in mode M, only the exposure
information shown in the electronic analog exposure display is affected; shutter speed and
aperture do not change).
Press the
button and rotate the main command dial until the
desired value is displayed in the control panel. Exposure compensation can be set to values between – 5 EV (underexposure) and
+ 5 EV (overexposure) in increments of / EV. In general, choose
positive values to make the subject brighter, negative values to
make it darker.
At values other than ± 0, a icon will be displayed after you release
the
button. The current value for exposure compensation will
be displayed in the viewfinder when the
button is pressed.
+ 2.0 EV
– 0.3 EV
–1 EV
No exposure compensation
+1 EV
Normal exposure can be restored by setting exposure compensation to ± 0. Exposure compensation is not reset when the camera is turned off.
10 — EV Step ( 89)
Use this option to set the increments for exposure compensation to ½ EV.
11 — Exposure Comp. ( 89)
If desired, exposure compensation can be set without pressing the
54
Reference: P, S, A, and M Modes / Exposure
button.
Flash Exposure Compensation
Controls used:
button + sub command dial
Flash exposure compensation is used to alter flash output from the level suggested by the
camera, changing the brightness of the main subject relative to the background. Flash output can be increased to make the main subject appear brighter, or reduced to prevent unwanted highlights or reflections.
Press the (
) button and rotate the sub-command dial until the
desired value is displayed in the control panel. Flash compensation
can be set to values between – 3 EV (darker) and + 1 EV (brighter) in
increments of / EV. In general, choose positive values to make the
subject brighter, negative values to make it darker.
At values other than ± 0, a
icon will be displayed after you release the (
) button. The current value for flash compensation
will be displayed in the viewfinder when the button is pressed.
−0.3 EV
+0.7 EV
Normal flash output can be restored by setting flash compensation to ± 0.0. Flash exposure
compensation is not reset when the camera is turned off.
Using Flash Exposure Compensation with Optional Speedlights
Flash exposure compensation is also available with an optional SB-800, SB-600, SB-400, or SB-R200
Speedlights.
10 — EV Step ( 89)
Use this option to set the increments for flash compensation to ½ EV.
Reference: P, S, A, and M Modes / Exposure
55
Bracketing
Controls used:
button + command dials
Bracketing automatically varies selected settings slightly with each shot, “bracketing” the
current value. The setting affected is chosen with Custom Setting 13 (Auto BKT set; 90);
Below, it is assumed that AE & flash is selected to vary exposure and flash level. Other options can be used to vary exposure or flash level separately or to bracket white balance.
the button and rotate the main command dial to choose the number of shots
1 Press
in the bracketing sequence (two or three).
No. of shots
Progress indicator
Press the button and rotate the sub-command dial to choose the bracketing incre2 ment
from values between 0.3 EV and 2.0 EV.
Bracketing
increment
Understanding the Bracketing Display
Number of shots
Progress indicator
Description
3 shots: unmodified, negative, positive
2 shots: unmodified, positive
2 shots: unmodified, negative
Bracketing Programs
See the Appendix for a list of bracketing programs (
140).
10 — EV Step ( 89)
Use this option to set the increments for exposure and flash bracketing to ½ EV.
14 — Auto BKT Order ( 91)
This option can be used to change the bracketing order.
56
Reference: P, S, A, and M Modes / Exposure
a photograph, focus, and shoot. The camera will vary
3 Compose
exposure and flash level with each shot. At default settings,
the first shot will be taken at the current values for exposure
and flash compensation and the following shots at modified
values. If the bracketing sequence consists of three shots, the
bracketing increment will be subtracted from the current values in the second shot and added in the third shot, “bracketing”
the current values. The modified values can be higher or lower
than the maximum and minimum values for exposure and
flash compensation. The modified shutter speed and aperture
are displayed in the control panel and viewfinder.
While bracketing is in effect, a bracketing progress indicator
will be displayed in the control panel. The segment will disappear from the indicator when the unmodified shot is taken,
the
indicator when the shot with the negative increment
is taken, and the
indicator when the shot with the positive
increment is taken.
To cancel bracketing, press the button and rotate the main command dial until the number of shots in the bracketing sequence is zero and
is no longer displayed in the control
panel. The program last in effect will be restored the next time bracketing is activated.
Exposure Bracketing
The camera modifies exposure by varying shutter speed and aperture (programmed auto), aperture
(shutter-priority auto), or shutter speed (aperture-priority auto, manual exposure mode). When On is
selected for Custom Setting 7 (ISO Auto; 88), the camera will automatically vary ISO sensitivity for
optimum exposure when the limits of the camera exposure system are exceeded. In exposure bracketing, shutter speed will only be changed after the camera has adjusted ISO sensitivity.
Exposure and Flash Bracketing
In continuous mode, shooting will pause after the number of shots specified in the bracketing program. Selecting or Digital Vari-Program modes will cancel bracketing; bracketing will resume when
mode P, S, A, or M is selected. Exposure and flash bracketing are cancelled when WB bracketing is
selected for Custom Setting 13 (Auto BKT set; 90).
Resuming Exposure or Flash Bracketing
If the memory card fills before all shots in the sequence have been taken, shooting can be resumed
from the next shot in the sequence after the memory card has been replaced or shots have been deleted to make room on the memory card. If the camera is turned off before all shots in the sequence
have been taken, bracketing will resume from the next shot in the sequence when the camera is
turned on.
Reference: P, S, A, and M Modes / Exposure
57
White Balance
Controls used: WB button + main command dial (monitor off )
White balance ensures that colors are unaffected by the color of the light source. Auto white
balance is recommended for most light sources; if necessary, other values can be selected
according to the type of source. The following options are available:
Option
Description
Camera sets white balance automatically. Recommended for most situAuto
ations.
Incandescent
Use under incandescent lighting.
Fluorescent
Use under fluorescent lighting.
Direct Sunlight
Use with subjects lit by direct sunlight.
Flash
Use with built-in flash or optional Nikon flash units.
Cloudy
Use in daylight under overcast skies.
Shade
Use in daylight with subjects in the shade.
Choose color temp. Choose color temperature from list of values ( 59).
White balance
Use gray or white object or existing photograph as reference for white
preset
balance ( 59).
To select a value for white balance, press the WB button and rotate the main command
dial until the desired setting is displayed in the control panel. White balance can also be
adjusted from the shooting menu ( 82).
Fine-Tuning White Balance
Controls used: WB button + sub-command dial (monitor off )
At settings other than (Choose color temp.) and PRE (White balance preset), white
balance can be “fine tuned” by ± 3 in increments of one. Choose lower values to make photographs appear slightly more yellow or red, higher values to lend images a bluish tinge.
Press the WB button and rotate the sub-command dial until the desired setting is displayed
in the control panel.
During shooting, settings other than ±0 are displayed in the control
panel as shown at right.
58
Reference: P, S, A, and M Modes / White Balance
Choosing a Color Temperature
Controls used: WB button + sub-command dial
(monitor off )
At a setting of (Choose color temp.), color temperature can be
selected by pressing the WB button and rotating the sub-command
dial until the desired value is displayed in the control panel. Color
temperature can also be selected in the shooting menu ( 82).
Preset White Balance
Preset white balance can be used when the desired results can not be achieved at other settings or to match white balance to the value used in an previous photograph. Two methods
are available for setting preset white balance:
Method
Direct measurement
Copy from existing
photograph
Description
Neutral gray or white object is placed under lighting that will be used in
final photograph and white balance is measured by camera ( 60).
White balance is copied from photo on memory card (
82).
Choose color temp.
Take a test shot to determine if the selected color temperature is appropriate to the light source. Note
that the desired results may not achieved with the flash or with fluorescent lighting; choose (Flash)
or
(Fluorescent) instead.
Color Temperature
The perceived color of a light source varies with the viewer and other conditions. Color temperature is
an objective measure of the color of a light source, defined with reference to the temperature to which
an object would have to be heated to radiate light in the same wavelengths. While light sources with
a color temperature in the neighborhood of 5,000–5,500 K appear white, light sources with a lower
color temperature, such as incandescent light bulbs, appear slightly yellow or red. Light sources with
a higher color temperature appear tinged with blue. The color temperatures for each of the white balance settings supported by the camera may be found in the Appendix ( 140).
13 — Auto BKT Set ( 90)
This option to create a series of photographs “bracketing” the current white balance value.
Reference: P, S, A, and M Modes / White Balance
59
Measuring a Value for Preset White Balance
a neutral gray or white object under the lighting that will be used in the final pho1 Place
tograph. A standard gray card can be used as a reference in studio settings. Do not use
exposure compensation.
the WB button and rotate the main command dial until
2 Press
control panel.
is displayed in the
the WB button briefly and then press the button until displays start to flash as
3 Release
shown at right. To exit without measuring a new value for white balance, press the WB
button.
the reference object so that it fills the viewfinder and
4 Frame
press the shutter-release button all the way down. The camera will measure a value for white balance and use this value
when preset white balance is selected. No photograph will be
recorded.
To exit without measuring a new value for white balance, press the WB button.
the camera was able to measure a value for white balance, the
5 Ifdisplays
will flash as shown at right for about six seconds before
the camera returns to shooting mode (to return to shooting
mode before the display stops flashing, press the shutter-release button halfway). White balance will automatically be set
to the measured value.
If the displays flash as shown at right, the camera was unable to
measure white balance. Press the shutter-release button halfway to return to Step 4 and measure white balance again.
60
Reference: P, S, A, and M Modes / White Balance
More on Playback
Viewing Photographs on the Camera
To view photographs in the monitor, press the
button. Photographs taken in “tall” (portrait) orientation are displayed in tall orientation as shown at right.
The following operations can be performed in full-frame playback:
To
Use
Description
Press multi selector to right or rotate main command dial right
to view photographs in order recorded. Press multi selector left
View additional
or
or rotate main command dial left to view photographs in rephotographs
verse order.
View photo inforPress multi selector up or down or rotate sub-command dial to
or
mation
view information about current photograph ( 62).
Zoom in on current photograph ( 64).
Zoom in on photo
Delete photo
Delete current photograph ( 65).
Protect photo
Protect current photograph ( 65).
View thumbnails
View multiple photographs ( 63).
Exit to shooting Shutter button To turn monitor off and return to shooting mode, press shuttermode
or
button.
release button halfway or press the
View menus ( 74).
View menus
Retouch photo
Create retouched copy of current photograph ( 109).
Auto Image Rotation ( 108)/Rotate Tall ( 75)
These options control whether photographs taken in “tall” orientation are rotated for display in the
monitor during playback.
6 — Image Review ( 88)
Choose whether to display photographs as they are taken.
27 — Monitor Off ( 98)
Choose how long the monitor remains on before turning off automatically to save power.
Reference: More on Playback / Viewing Photographs on the Camera
61
Photo Information
Photo information is superimposed on images displayed in full-frame playback. Press the
multi selector up or down or rotate the sub-command dial to cycle through the following information: Basic Information ↔ Shooting Data Page 1 ↔ Shooting Data Page 2 ↔ Retouch
History (retouched copies only) ↔ Highlights ↔ RGB Histogram ↔ Basic Information.
Basic Information
1 Protect status .......................... 65
2 Retouch indicator ............. 109
3 Frame number/total
number of images
4 Folder name ............................ 75
5
6
7
8
9
Image quality.......................... 34
Date of recording .......14, 103
Time of recording ......14, 103
File name ................................... 35
Image size ................................. 35
Protect status .......................... 65
Retouch indicator ............. 109
Camera name
Metering .................................... 52
Shutter speed ................. 48, 50
Aperture ............................ 49, 50
Shooting Data, Page 1
1
2
3
4
5
6
7
8
9
10
11
Mode ........................................... 45
Exposure compensation .. 54
Focal length................................1
Flash mode .............................. 40
Frame number/total
number of images
Shooting Data, Page 2
7 Tone compensation ........... 80
Protect status .......................... 65
8 Sharpening .............................. 80
Retouch indicator ............. 109
9 Color mode/hue ................... 80
Image optimization 1.......... 79
ISO sensitivity 2 ....................... 43 10 Saturation ................................. 80
11 Image comment 3 ............. 104
White balance/white
balance fine-tuning ............ 58 12 Frame number/total
number of images
6 Image size/
image quality.................. 34, 35
1. Filter name is displayed if photo was taken with filter option selected for Optimize image > Black-and-white > Custom.
2. Displayed in red if ISO sensitivity was modified from selected value
by auto ISO.
3. Only first 13 letters are displayed.
1
2
3
4
5
Retouch History 1
1 Protect status ...........................................................................................................65
2 Retouch indicator ..............................................................................................109
3 Retouch history: Lists changes made to image using options
in retouch menu ( 109), starting with most recent change. .109
4 Frame number/total number of images
1. Displayed if image was created using options in retouch menu.
62
Reference: More on Playback / Viewing Photographs on the Camera
Highlights
Highlights are areas of the image in which details may be lost
(“washed out”) due to overexposure. Use the highlight display as a guide when adjusting exposure.
1 Protect status ...........................................................................................................65
2 Retouch indicator ..............................................................................................109
3 Image highlights (areas of image that are “washed out”) are
indicated by flashing border
4 Frame number/total number of images
RGB Histogram
A histogram is a graph showing the distribution of tones in the
image. The horizontal axis corresponds to pixel brightness,
with dark pixels at the left and bright pixels at the right. The
vertical axis shows the number of pixels of each brightness
in the image. Note that camera histograms may differ from
those displayed in imaging applications.
1
2
3
4
Protect status .......................... 65
Retouch indicator ............. 109
Histogram (all channels)
Red channel histogram
5 Green channel histogram
6 Blue channel histogram
7 Frame number/total
number of images
Viewing Multiple Images: Thumbnail Playback
To display images in “contact sheets” of four or nine images,
press the
button in full-frame playback. The following
operations can be performed while thumbnails are displayed:
To
Display more images per page
Display fewer images per page
Highlight
photographs
View highlighted
picture full frame
Delete photo
Protect photo
Exit to shooting
mode
View menus
Use
Description
Increase number of images displayed from one (full-frame playback) to four or from four to nine.
Decrease number of images displayed from nine to four or from
four to one (full-frame playback).
Use multi selector to highlight photographs, or rotate main
command dial to move cursor up or down, sub-command dial
to move cursor left or right.
View picture highlighted in thumbnail list full frame.
Delete highlighted photograph ( 65).
Protect highlighted photograph ( 65).
Shutter button To turn monitor off and return to shooting mode, press shutteror
button.
release button halfway or press the
View menus ( 74).
Reference: More on Playback / Viewing Photographs on the Camera
63
Taking a Closer Look: Playback Zoom
Press the
button to zoom in on a photograph in full-frame playback. The following operations can be performed:
To
Description
Press
to zoom in to maximum of approximately 25 × (large images), 19 × (medium images) or 13 × (small images). Press
Zoom in and out
/
to zoom out. While photo is zoomed
in, press multi selector up, down, left, or
right to view areas of image not visible
in monitor. Keep multi selector pressed to scroll rapidly to other
areas of frame. Navigation window is displayed when zoom
View other areas of
ratio is altered; area currently visible in monitor is indicated by
image
yellow border.
Rotate main command dial to view same location in other imView other images
ages at current zoom ratio.
Cancel zoom
Return to full-frame playback.
Delete current photograph ( 65).
Delete photo
Protect current photograph ( 65).
Protect photo
Exit to shooting Shutter button To turn monitor off and return to shooting mode, press shuttermode
or
release button halfway or press the
button.
View menus ( 74).
View menus
64
Use
Reference: More on Playback / Viewing Photographs on the Camera
Protecting Photographs from Deletion
In full-frame, zoom, and thumbnail playback, the
button can be used to protect photographs from accidental deletion. Protected files can not be deleted using the
button or
the Delete option in the playback menu, and have DOS “read-only” status when viewed on
a Windows computer. Note that protected files will be deleted when the memory card is
formatted ( 102).
Press the
button to protect the photograph currently
displayed in full-frame or zoom playback or highlighted in
the thumbnail list. The photograph will be marked with a
icon.
butTo remove protection from the photograph so that it can be deleted, press the
ton when the photograph is displayed in full-frame or zoom playback or highlighted in the
thumbnail list. To remove protection from all images in the folder or folders currently selected for Playback Folder, press the and
buttons together for about two seconds.
Deleting Individual Photographs
Press the
button to delete the photograph currently displayed in full-frame or zoom
playback or highlighted in the thumbnail list. One of the following confirmation dialogs will
be displayed; press the
button again to delete the photograph. Press any other button
to exit without deleting the photograph.
Delete ( 74)
This option can be used to delete multiple photographs.
Reference: More on Playback / Viewing Photographs on the Camera
65
Connecting to a TV, Computer, or Printer
Viewing Photographs on TV
The supplied EG-D2 audio/video (A/V) cable can be used to connect the camera to a television or VCR for playback or recording. Background music included with Pictmotion slide
shows ( 75) will be played back over the television speakers.
1 Choose the appropriate video mode (
103).
the camera off. Always turn the camera off before con2 Turn
necting or disconnecting the A/V cable.
3 Connect the A/V cable as shown.
Video connector
Audio (white)
Connect to
video device
Video (yellow)
Connect to
camera
4 Tune the television to the video channel.
the camera on. During playback, images will be displayed
5 Turn
on the television or recorded to video tape; the camera monitor will remain off.
Use an AC Adapter
Use of an EH-5/EH-5a AC adapter (available separately) is recommended for extended playback.
When the EH-5/EH-5a is connected, the camera monitor-off delay will be fixed at ten minutes
and the exposure meters will remain on indefinitely.
66
Reference: Connecting to a TV, Computer, or Printer / Viewing Photographs on TV
Connecting to a Computer
This section describes how to connect the camera to a computer using the supplied UC-E4
USB cable. Once the camera is connected, Nikon Transfer (supplied) or optional Nikon software such as Camera Control Pro 2 or Camera Control Pro can be used to copy photographs
to the computer or control the camera remotely.
Before Connecting the Camera
Install Nikon Transfer from the supplied Software Suite installer CD (see the Quick Start Guide
for more information). To ensure that data transfer is not interrupted, be sure the camera
battery is fully charged. If in doubt, charge the battery before connecting the camera or use
an EH-5/EH-5a AC adapter (available separately).
Before connecting the camera, select the USB item in the camera
setup menu and choose a USB option as described below.
Computer operating system*
Windows Vista (32-bit Home Basic/
Home Premium/Business/Enterprise/
Ultimate editions)
Windows XP (Home Edition/Professional)
Mac OS X (version 10.3.9 or 10.4.10)
Windows 2000 Professional
USB
Choose MTP/PTP or Mass
Storage
Choose Mass Storage†
* See the websites listed on page x for the latest information on supported operating systems.
† Do NOT select MTP/PTP. If MTP/PTP is selected when the camera is connected, the Windows hardware wizard will be displayed. Click Cancel to exit the wizard, and then disconnect the camera and
select Mass Storage.
Connecting the USB Cable
1 Turn the computer on and wait for it to start up.
2 Turn the camera off.
the supplied UC-E4 USB cable as shown. Do not use force or attempt to insert
3 Connect
the connectors at an angle. Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard.
USB connector
Reference: Connecting to a TV, Computer, or Printer / Connecting to a Computer
67
Turn the camera on. The computer will detect the camera au4 tomatically
and display Nikon Transfer. If Mass Storage is selected for USB, the control panel and viewfinder will display
the indicators shown at right (when MTP/PTP is selected, the
normal shooting indicators are displayed).
Transfer photographs to the computer as described in the online help for Nikon Trans5 fer.
To view the online help, start Nikon Transfer and select Nikon Transfer help from
the Nikon Transfer Help menu.
MTP/PTP is selected for USB, the camera can be turned off and the USB cable discon6 Ifnected
once transfer is complete. If Mass Storage is selected, the camera must first be
removed from the system as described below.
Windows Vista/Windows XP
Click the “Safely Remove Hardware” icon in the taskbar ( ) and
select Safely remove USB Mass Storage Device.
Windows 2000 Professional
Click the “Unplug or Eject Hardware” icon in the taskbar ( ) and
select Stop USB Mass Storage Device.
Mac OS X
Drag the camera volume (“NIKON D80”) into the Trash. Note
that Nikon Transfer will automatically remove the camera from
the system when transfer is complete.
During Transfer
Do not turn the camera off or disconnect the USB cable while transfer is in progress.
Camera Control Pro 2 and Camera Control Pro
Camera Control Pro 2 and Camera Control Pro (both available separately;
123) can be used to operate the camera from a computer. Before connecting the camera, set the camera USB option ( 104) to MTP/PTP. When
Camera Control Pro is running, the camera will show
in place of the
number of exposures remaining.
Camera Control Pro automatically checks for updates if an Internet connection is detected at startup.
68
Reference: Connecting to a TV, Computer, or Printer / Connecting to a Computer
Printing Photographs
Photographs can be printed by any of the following methods:
• Connect the camera to a printer and print JPEG photographs directly from the camera (see
below).
• Insert the camera memory card in a printer equipped with a card slot (see the printer manual for details). If the printer supports DPOF ( 134), photographs can be selected for
printing using Print Set ( 73).
• Take the camera memory card to a developer or digital printer center. If the center supports DPOF, photographs can be selected for printing using Print Set.
• Transfer pictures ( 67) and print them from a computer using ViewNX (supplied) or Capture NX (available separately; 123). Note that this is the only method available for printing RAW (NEF) pictures.
Printing Via Direct USB Connection
JPEG photographs can be printed directly from a camera connected to a PictBridge printer
( 134). When taking photographs for printing via direct USB connection in P, S, A, and M
modes, choose Ia (sRGB) or IIIa (sRGB) for the Custom > Color mode option in the Optimize image menu ( 80).
Take photographs
Select photographs for printing
using Print Set
Select MTP/PTP in camera USB menu and connect camera to printer (
Print photographs
one at a time ( 71)
Print multiple
photographs ( 72)
70)
Create index prints
( 72)
Disconnect USB cable
Printing Via Direct USB Connection
If an error occurs during printing, the camera will display the dialog shown at
right. After checking the printer, press the multi selector up or down to highlight Continue and press OK to resume printing. Select Cancel to exit without
printing the remaining pages.
RAW (NEF) photographs can not be printed by direct USB connection. They are displayed in the Print
Select menu but can not be selected for printing.
Reference: Connecting to a TV, Computer, or Printer / Printing Photographs
69
Connecting the Printer
Before printing, check that the camera battery is fully charged. If in doubt, charge the battery or use an EH-5/EH-5a AC adapter (available separately).
1 Set the camera USB option to MTP/PTP (
104).
2 Turn the printer on.
3 Turn the camera off.
the supplied UC-E4 USB cable as shown. Do not use force or attempt to insert
4 Connect
the connectors at an angle. Connect the camera directly to the printer; do not connect
the cable via a USB hub or keyboard.
USB connector
Turn the camera on. A welcome screen will be displayed, fol5 lowed
by the PictBridge playback display. Proceed to “ Printing
Pictures One at a Time” (
72).
71) or “ Printing Multiple Pictures” (
➜
Press the multi selector left or right to view additional photographs, or press the button to zoom in on the current photo ( 64). To view six photographs at a time, press
the
button. Use the multi selector to highlight photographs, or press
to display
the highlighted photograph full frame.
70
Reference: Connecting to a TV, Computer, or Printer / Printing Photographs
Printing Pictures One at a Time
To print the picture currently selected in the PictBridge playback
display, press OK. The menu shown at right will be displayed. Press
the multi selector up or down to highlight an option and press to
the right to select.
Option
Description
Print current picture. To cancel and return to PictBridge playback display before printStart
ing is complete, press OK. PictBridge playback display is shown when printing is comPrinting
plete.
Menu shown at right will be displayed. Press multi selector up or down to choose page size from Printer Default
Page Size (default page size for current printer), 3.5 x 5 in., 5 x 7 in.,
100 x 150 mm, 4 x 6 in., 8 x 10 in., Letter, A3, or A4,
then press OK to select and return to print menu.
Menu shown at right will be displayed. Press multi selector
up or down to choose number of copies (maximum 99),
No. of Copies then press OK to select and return to print menu.
Menu shown at right will be displayed. Press multi selector up or down to choose print style from Printer Default
Border
(default for current printer), Print with Border (print
photo with white border), or No Border, then press OK to
select and return to print menu.
Menu shown at right will be displayed. Press multi selector
up or down to choose Printer Default (default for current
Time stamp printer), Print Time Stamp (print time and date of recording on photo), or No Time Stamp, then press OK to select
and return to print menu.
Menu shown at right will be displayed. To exit without
cropping picture, highlight No cropping and press OK.
To crop picture, highlight Crop and press multi selector
right.
Cropping
If Crop is selected, dialog shown at right will be displayed.
Use
and
buttons to choose size of crop and use
multi selector to choose position of crop. Press OK to return to print menu.
Page Size, Border, and Time Stamp
Choose printer default to print at current printer settings. Only options supported by the current
printer can be selected.
Reference: Connecting to a TV, Computer, or Printer / Printing Photographs
71
Printing Multiple Pictures
To print multiple pictures or create an index print listing all JPEG
button in the
photographs as small thumbnail images, press the
PictBridge playback display. The menu shown at right will be displayed. Press the multi selector up or down to highlight an option
and press to the right to select.
Option
Description
Print Select Print selected pictures (see below).
Print (DPOF) Print current DPOF print order ( 73).
Create index print of all JPEG photos, to maximum of 256.
Confirmation dialog shown at right will be displayed; press
OK to display menu of print options. Choose page size,
border, and time stamp options as described on precedIndex Print
ing page (warning will be displayed if selected page size is
too small). To start printing, highlight Start Printing and
press OK. PictBridge menu will be displayed when printing
is complete.
Printing Selected Photographs
Choosing Print Select displays the menu shown in Step 1.
1
Scroll through pictures. To display current
button.
picture full screen, press
72
2
Select current picture and set number of
prints to 1. Selected pictures marked by
icon.
3
Specify number of prints (up to 99). To deselect
picture, press multi selector down when number of prints is 1. Repeat Steps 1 – 3 to select
additional pictures.
4
Display print options. Choose page size, border, and time stamp options as described on
page 71. To start printing, highlight Start
Printing and press OK. PictBridge menu will be
displayed when printing is complete.
Reference: Connecting to a TV, Computer, or Printer / Printing Photographs
Creating a DPOF Print Order: Print Set
The Print Set option in the playback menu is used to create digital “print orders” for
PictBridge-compatible printers and devices that support DPOF. Selecting Print Set from
the playback menu displays the menu shown in Step 1.
1
2
Highlight Select / Set.
Display selection dialog.
3
Select pictures and specify number of prints as described in Steps 2 – 3 on previous page.
Note that RAW (NEF) photos can not be selected for printing.
4
Display options. Highlight option and press
multi selector right:
• Data imprint: Print shutter speed and aperture
on all pictures in print order.
• Imprint date: Print date of recording on all pictures in print order.
To complete print order and exit, highlight
Done and press OK.
To print the current print order when the camera is connected to a PictBridge printer, select Print (DPOF) in the PictBridge menu and follow the steps in “ Printing Selected Photographs” to modify and print the current order ( 72). DPOF date and data imprint options
are not supported when printing via direct USB connection; to print the date of recording on
photographs in the current print order, use the PictBridge Time Stamp option ( 71).
Print Set
The Print Set option can not be used if there is not enough space on the memory card to store the
print order.
Print orders may not print correctly if images are deleted using a computer after the print order is created.
Reference: Connecting to a TV, Computer, or Printer / Printing Photographs
73
Menu Guide
Playback Options: The Playback Menu
The playback menu contains the following options (options displayed
may differ if My menu is selected for the CSM/Setup menu option
in the setup menu; 101). See “Using Camera Menus” ( 9) for more
information on using the menus.
Option
Description
Delete
Delete all or selected photos.
Playback folder Choose folder for playback.
Rotate tall
Slide show
Hide image
Print set
74
75
Rotate “tall” (portrait-orientation) photos during playback.
Play photos back in automatic slide shows, either with background music and
75
panning, zoom, and transition effects (Pictmotion) or without (standard).
Hide selected photos.
78
Select photos for printing.
78
Delete
The delete menu contains the following options:
Option
Selected
All
Description
Delete selected photographs (see below).
Delete all photographs.
Selecting Multiple Pictures
To select multiple pictures for deletion, slide shows, or the Hide image option:
1
2
Highlight picture. To view highlighted picture full frame, press
button.
3
Repeat steps 1–2 to select additional pictures. To deselect picture, highlight and
press multi selector down.
Select highlighted picture.
Selection shown by icon.
4
Complete operation.
74
75
Menu Guide / Playback Options: The Playback Menu
Playback Folder
Choose a folder for playback:
Option Description
Only photos in the folder currently selected for Folders in the shooting menu are displayed during playback. This option is selected
Current automatically when a photo is taken. If a memory card is inserted
(default) and this option selected before photos have been taken, a message
stating that the folder contains no images will be displayed during
playback. Select All to begin playback.
All
Play back photos in all folders on the memory card.
Rotate Tall
Select On to rotate “tall” (portrait-orientation) photos for display in the
monitor. Photographs taken with Off selected for Auto image rotation ( 108) will be displayed in “wide” (landscape) orientation.
Slide Show
Play pictures back one after the other in an automated “slide show.” A
Pictmotion option is available with transitions, panning and zoom effects and background music (background music will only be audible if
the camera is connected to a television set; 66).
The recommended steps involved in creating a slide show are shown
below.
photos
1 Select
Highlight Select pictures and press the multi selector right. Highlight one of the following options and press OK to select the highlighted option and return to the slide
show menu.
•All pictures: Slide show will include all the photos in the current playback folder ( 75).
•Select pictures: Select up to fifty photos for the slide show ( 74). Only photos in the current playback folder ( 75) are available for selection; hidden photos and images that
can not be displayed by the camera can not be selected.
Menu Guide / Playback Options: The Playback Menu
75
a style
2 Choose
Highlight Change settings and press the multi selector right, then highlight Style and
press the multi selector right. Highlight one of the following options and press OK to
select the highlighted option and return to the slide show menu.
•Standard: Pictures are played back at a selected interval, without background music,
transitions, or other effects.
•Pictmotion: Select a pattern that includes background music with matching transitions
and panning and zoom effects. Note that background music will only be audible if the
camera is connected to a television ( 66).
a frame interval or playback pattern
3 Choose
Highlight Change settings and press the multi selector right, then choose a frame
interval or playback pattern as described below.
“Standard” selected in Step 2
To change the interval between slides from the default setting of two seconds, highlight Frame
interval and press the multi selector right. Highlight one of the following options and press OK
to select the highlighted option and return to the slide show menu.
“Pictmotion” selected in Step 2
To change the background track from the default setting of Pachelbel’s Canon, highlight
Background music and press the multi selector right. Highlight one of the following options
and press OK to select the highlighted option and return to the slide show menu.
Panning and zoom effects and transitions are matched to the selected background track.
76
Menu Guide / Playback Options: The Playback Menu
the show
4 Start
To start the slide show, highlight Start and press OK. The following
operations can be performed during a slide show:
To
Use
Go forward or
back one frame
/
View photo info
/
Pause slide
show
Exit to playback
menu
Exit to playback
mode
Exit to shooting
mode
Description
Press multi selector or rotate main command dial left to return
to the previous frame, right to skip to the next frame. This option is not available if Pictmotion is selected in Step 2.
Change the photo info displayed. This option is not available if
Pictmotion is selected in Step 2.
Pause the slide show.
End the slide show and return to the playback menu.
Shutter
release
End the slide show and return to full-frame ( 61) or thumbnail
playback ( 63).
Press the shutter-release button halfway to turn the monitor off
and return to shooting mode. Photos can be taken immediately.
The dialog shown at right is displayed when the show ends or
when the
button is pressed to pause playback. Select Restart
to restart the show or Exit to return to the playback menu.
Menu Guide / Playback Options: The Playback Menu
77
Hide Image
Hide or reveal selected photographs. Hidden images are visible only
in the Hide Image menu, and can only be deleted by formatting the
memory card.
Option
Select/set
Deselect all?
Description
Hide or reveal selected photographs (
Reveal all photographs.
74).
File Attributes for Hidden Images
Hidden images have “hidden” and “read-only” status when viewed on a Windows computer. In the
case of “NEF + JPEG” images, this marking applies to both NEF (RAW) and JPEG images.
Print Set
Choose Select / set to select photographs for printing on a PictBridge
printer or DPOF-compatible device ( 73). Choose Deselect all? to
remove all photos from the current print order.
Protected and Hidden Images
Revealing an image that is both hidden and protected will simultaneously remove protection from
the image.
78
Menu Guide / Playback Options: The Playback Menu
Shooting Options: The Shooting Menu
The shooting menu contains the following options (options displayed
may differ if My menu is selected for the CSM/Setup option in the
setup menu; 101). See “Using Camera Menus” ( 9) for more information on using the menus.
Option
Description
Optimize image * Optimize images according to scene.
Choose image quality.
Image quality †
Image size †
Choose image size.
White balance *, † Adjust colors according to the light source.
Raise sensitivity when lighting is poor.
ISO sensitivity †
Long exp. NR
Reduce noise at slow shutter speeds.
High ISO NR
Reduce noise at high ISO sensitivities.
Multiple exposure *, † Record multiple exposures in a single frame.
* Available in P, S, A, and M modes only.
† Reset to defaults when a two-button reset is performed ( 44).
79–81
81
81
82
83
83
83
84–85
Optimize Image (P, S, A, and M Modes)
Optimize contrast, sharpening, and other settings according to how photographs will be
used or the type of scene.
Option
Description
N Normal (default) Recommended for most situations.
SO Softer
VI Vivid
VI More vivid
PO Portrait
Custom
BW Black-and-white
Softens outlines, producing natural results suitable for portraits or retouching
on a computer.
Enhances saturation, contrast, and sharpness to produce vivid images with
vibrant reds, greens, and blues.
Maximizes saturation, contrast, and sharpness to produce crisp images with
sharp outlines.
Lowers contrast while lending natural texture and rounded feel to skin of portrait subjects.
Customize image optimization settings ( 80).
Take photos in black-and-white ( 81).
At Settings Other than “Custom”
At settings other than Custom:
• Photographs are optimized for current shooting conditions. Results will vary with exposure and the
position of the subject in the frame.
• The sRGB color space is used. To use the Adobe RGB color space, select Custom and choose II
(Adobe RGB) for Color Mode.
• Use a type G or D lens for best results.
Menu Guide / Shooting Options: The Shooting Menu
79
Customizing Image Enhancement Options: Custom
Select Custom to make separate adjustments to the following options. After adjusting settings, highlight Done and press .
• Image sharpening: Choose how much outlines are sharpened during
shooting. Choose high settings for sharp outlines, low settings for
softer outlines.
Default setting: Auto.
• Tone compensation: Control contrast. Lower settings prevent loss of
detail in highlights under harsh lighting or in direct sunlight. Higher
settings preserve detail in misty landscapes and other low-contrast
subjects. Choose Custom to select a user-defined tone curve created
using Camera Control Pro 2 or Camera Control Pro (both available
separately; 123). See the software instruction manual for details.
Default setting: Auto.
• Color mode: Control color reproduction. Photos taken in modes Ia and
IIIa are adapted to the sRGB color space and are suited for printing or
use “as is,” with no further modification. Choose Ia for portrait shots
and IIIa for nature or landscape shots. Mode II is adapted to the Adobe
RGB color space, which supports a wider gamut of colors than sRGB.
Mode II is the preferred choice for photos that will be extensively processed or retouched.
Default setting: Ia (sRBG).
• Saturation: Control the vividness of colors. Choose Moderate for less
saturated colors, Enhanced for more vivid colors.
Default setting: Auto.
• Hue adjustment: Hue can be adjusted between –9 ˚ to +9 ˚ in increments
of 3 ˚ (the degrees refer to the “color wheel” often used to express hue).
Positive values make reds more orange, greens more blue, and blues
more purple. Negative values make reds more purple, blues more
green, and greens more yellow.
Default setting: ±0.
“Auto”
Results for auto image sharpening, tone compensation, and saturation vary with exposure and the
position of the subject in the frame. Use a type G or D lens for best results.
Color Mode
Modes Ia and IIIa are recommended for photos that will be printed without modification or viewed in applications that do not support color management. If the application supports color management, choose
the Adobe RGB color space when opening photos taken in mode II. ViewNX (supplied) and Capture NX
(available separately; 123) display colors correctly even if the correct color space is not selected.
80
Menu Guide / Shooting Options: The Shooting Menu
Taking Pictures in Black-and-White: Black-and-White
Selecting Black-and-white for Optimize image displays the menu
shown at right. Choose Normal to take standard black-and-white pictures, or Custom to adjust sharpening and tone compensation before
shooting as described in on page 80. Custom also supports the following color filter effects:
Filter effect
Off
Yellow
Orange
Red
Green
Description
No color filter effect.
Enhances contrast. Can be used to tone down the brightness of the sky in landscape photographs. Orange produces more contrast than yellow, red more contrast
than orange.
Softens skin tones. Can be used for portraits.
Black-and-white indicators appear in the control panel and viewfinder when Black-andwhite is selected for Optimize image ( 5–7).
Image Quality (All Modes)
Seven options are available for image quality. See “Reference: Image
Quality and Size” ( 33).
Image Size (All Modes)
Image size can be selected from Large, Medium, and Small. See “Reference: Image Quality and Size” ( 33).
Menu Guide / Shooting Options: The Shooting Menu
81
White Balance (P, S, A, and M Modes)
Nine options are available for white balance. See “Reference: White Balance” ( 58).
Copying White Balance from a Photograph
A white balance value copied from an existing photograph can be used for preset white
balance. Select White balance > White balance preset in the shooting menu. The menu
shown in Step 1 will be displayed.
1
2
Highlight Use photo. *
* To use last measured value (
Display current source photo.
60), highlight Measure and press multi selector right.
3
4
Highlight Select image. †
Display folder list.
† To use the previous source photo, highlight This image and press multi selector right.
5
6
Highlight folder.
Display images in selected folder.
7
8
Highlight photograph.
‡
Set preset white balance to value for highlighted photograph and return to shooting
menu.
‡ Images displayed may include those created with other cameras, but only photographs created
with D80 can be used as source for preset white balance.
Note that if a new value is measured for white balance, white balance will be set to the measured value even if Use photo is currently selected in the preset white balance menu.
82
Menu Guide / Shooting Options: The Shooting Menu
ISO Sensitivity (All Modes)
Adjust ISO sensitivity. See “Reference: ISO Sensitivity” (
43).
Long Exp. NR (All Modes)
Photographs taken at shutter speeds slower than 8 s can be processed
to reduce “noise” in the form of randomly-spaced, brightly-colored pixels. Choose from the following options:
Option
Off (default)
On
Description
Noise reduction off.
Photographs taken at shutter speeds slower than 8 s are processed to reduce noise, slowing burst shooting and reducing
the number of images that can be stored in the memory buffer. During processing, the displays shown at right appear in
the control panel and viewfinder. No further photos can be
taken until processing is complete. Noise reduction will not
be performed if the camera is turned off during processing.
Note that if photos are played back during processing, the
image displayed in the monitor may not show the effects of
noise reduction.
High ISO NR (All Modes)
Photographs taken at high sensitivities can be processed to reduce
“noise”. Choose from the following options:
Option
Normal
(default)
Low
High
Off
Description
Noise reduction takes effect at sensitivities over ISO 400. Choose
Low for less noise reduction, High for more noise reduction.
Noise reduction turns off unless sensitivity exceeds ISO 800. Minimal noise reduction is performed at sensitivities over ISO 800.
Menu Guide / Shooting Options: The Shooting Menu
83
Multiple Exposure (P, S, A, and M Modes)
Follow the steps below to record a series of two or three exposures in a
single photograph. Note that at default settings, shooting will end automatically if no operations are performed for 30 s. For an interval between exposures of more than 30 s, choose 30 min for Custom Setting
28 (Auto meter-off; 99) or use an optional EH-5/EH-5a AC adapter.
Multiple exposure in the shooting menu displays the
1 Selecting
menu shown at right. Highlight Number of shots and press the
multi selector right.
Press the multi selector up or down to choose the number of ex2 posures
that will be combined to form a single photograph. Press
OK to return to the multiple exposure menu.
3 Highlight Auto gain and press the multi selector to the right.
one of the following options and press OK.
4 Highlight
Option
Description
On
(default)
Off
Gain adjusted to correct exposure according to the number of exposures recorded (gain for each exposure is set
to / for two exposures, / for three exposures).
Gain not adjusted to correct exposure. Recommended if
background is dark.
Exchanging Memory Cards
Do not remove or replace the memory card while recording a multiple exposure.
Photo Info
The date of recording, metering, exposure, mode, focal length, camera orientation, and other information listed in the playback photo information display is for the first shot in the multiple exposure.
84
Menu Guide / Shooting Options: The Shooting Menu
5 Highlight Done and press OK.
A icon will be displayed in the control panel. To exit without recording a multiple exposure, select Multiple exposure from the
shooting menu, highlight Reset, and press OK.
a photograph, focus, and shoot. The
6 Frame
blink.
icon will start to
Cancelling a Multiple Exposure
To end shooting before the multiple exposure is complete, select Multiple exposure from the shooting menu, highlight Cancel, and press
OK. Shooting will also end if:
• The exposure meters turn off during shooting ( 18)
• The user performs a two-button reset
• The camera is turned off
• The battery is exhausted
• The multiple exposure is deleted
• A mode other than P, S, A, or M is selected
If shooting ends before the specified number of exposures have been taken, a multiple exposure will be created from the exposures that have been recorded to that point. If Auto gain is
on, gain will be adjusted to reflect the number of exposures actually recorded.
Take the remaining exposures. The icon will disappear from the
7 control
panel when shooting is complete. Repeat steps 1 – 7 to
take additional multiple exposures.
Bracketing and Other Settings
Bracketing is cancelled when multiple exposure is selected and can not be restored until shooting has
ended. While multiple exposure mode is in effect, memory cards can not be formatted and no shooting menu options can be changed, with the exceptions of Multiple exposure and White balance.
Menu Guide / Shooting Options: The Shooting Menu
85
Custom Settings
Custom Settings are used to customize camera settings to suit individual preferences. The following options are available when Simple (the
default option) is selected for CSM/Setup menu in the setup menu
( 101):
R
1
2
3
4
5
Option
Reset
Beep
AF-area mode
Center AF area
AF-assist
No memory card?
86
86
87
87
87
88
6
7
8
9
10
Option
Image review
ISO auto
Grid display
Viewfinder warning
EV step
88
88
89
89
89
To display the following options, select Full for CSM/Setup menu:
11
12
13
14
15
16
17
18
19
20
21
Option
Exposure comp.
Center-weighted
Auto BKT set
Auto BKT order
Command dials
FUNC button
Illumination
AE-L/AF-L
AE lock
Focus area
AF area illumination
89
90
90–91
91
91
92–93
93
94
94
94
95
22
23
24
25
26
27
28
29
30
31
32
Option
Built-in flash
Flash warning
Flash shutter speed
Auto FP
Modeling flash
Monitor-off
Auto meter-off
Self-timer
Remote on duration
Exp. delay mode
MB-D80 batteries
R: Reset
Select Reset to restore all Custom Settings to their default values, including settings not affected by a two-button reset ( 44). See the
Appendix ( 134) for a complete list of default settings.
1: Beep (All Modes)
At the default setting of On, a beep will sound when the camera focuses in single-servo AF (AF-S or when shooting stationary subjects in
AF-A autofocus mode), while the release timer is counting down in selftimer and delayed remote modes ( 37, 38), or when a photograph is
taken in quick-response remote mode ( 38). The beep will not sound
when Off is selected. The current setting is shown in the control panel:
is displayed when the beep is on, when it is off ( 5).
86
Menu Guide / Custom Settings
95–97
98
98
98
98
98
99
99
99
99
100
2: AF-Area Mode (All Modes)
This option determines how the focus area is selected in autofocus
mode ( 28). Choose from:
Option
Description
User selects focus area using multi selector; camera focuses on subject in selected
Single area focus area only. Use with stationary subjects. Default setting for P, S, A, M, and
modes.
User selects focus area manually, but if subject leaves selected focus area even briefDynamic area ly, camera will focus based on information from other focus areas. Use with erratically moving subjects. Default setting for mode.
Auto-area AF Camera selects focus area automatically. Default for , , , , and modes.
The current setting is shown by an icon in the control panel (
5).
3: Center AF Area (All Modes)
This option determines the size of the center focus area.
Option
Description
Viewfinder display
Focus on a specific subject in a small area
Normal zone
without other nearby objects interfering with
(default)
focus.
Focus on moving subjects and other objects
that are difficult to track. Not available when
Wide zone
Auto-area AF is selected for Custom Setting 2
(AF-area mode).
See “Focus” for more information on focus settings (
4: AF-Assist (All Modes Except
,
28).
, and )
If On (the default setting) is selected and the subject is poorly lit, the
AF-assist illuminator will light to assist the focus operation in single-servo AF (AF-S or single-servo AF selected in AF-A autofocus mode) when
Single area or Auto-area AF is selected for Custom Setting 2 (AFarea mode) or when Custom Setting 2 is set to Dynamic area and
the center focus area is selected. Choose Off to disable the AF-assist
illuminator. Note that when the illuminator is off, the camera may not
be able to focus on poorly-lit subjects using autofocus.
Menu Guide / Custom Settings
87
5: No Memory Card? (All Modes)
If Release locked (the default setting) is selected, the shutter-release
is disabled when no memory card is inserted. Choose Enable release
to enable the shutter-release button when no memory card is inserted.
Photographs will be displayed in the monitor but will not be saved.
6: Image Review (All Modes)
If On (the default setting) is selected, photographs will automatically be
displayed in the monitor for about four seconds after shooting. If Off
is selected, photographs can be displayed in the monitor by pressing
the
button.
7: ISO Auto (P, S, A, and M Modes Only)
If Off (the default setting) is selected, ISO sensitivity will remain fixed at
the value selected with the ISO button ( 43) or using the ISO sensitivity option in the shooting menu ( 83).
If On is selected, ISO sensitivity will automatically be adjusted if optimal exposure can not be
achieved at the selected value (flash level is adjusted appropriately). The maximum value for
auto ISO sensitivity can be selected using the Max. sensitivity option. In modes P and A,
sensitivity will only be adjusted if underexposure would result at the shutter speed selected
for Min. shutter speed.
When On is selected, the control panel and viewfinder show ISO-AUTO.
When sensitivity is altered from the value selected by the user, these
indicators blink and the altered value is shown in the viewfinder (the
indicators do not blink if a flash is used.
ISO Auto
Auto ISO control is not available when a value over ISO 1600 is selected for ISO sensitivity. ISO sensitivity can not be set to values over 1600 when On is selected for ISO auto. Foreground subjects
may be underexposed in photos taken with the flash at slow shutter speeds, in daylight, or against a
bright background. Choose a flash mode other than slow sync or select mode A or M and choose a
larger aperture.
Noise is more likely at higher sensitivities. Use the High ISO NR option in the shooting menu to
reduce noise ( 83).
88
Menu Guide / Custom Settings
8: Grid Display (All Modes)
Select On to display grid lines in the viewfinder to assist in framing photographs ( 6). The default option is Off.
9: Viewfinder Warning (All Modes)
Select On (the default option) to display the following warnings in the
viewfinder ( 6):
Warning
B/W
Description
Displayed when Black-and-white is selected for Optimize image in the shooting menu ( 81).
Displayed when the battery is low.
Displayed when no memory card is inserted.
No warnings are displayed when Off is selected.
10: EV Step (All Modes)
Choose whether adjustments to shutter speed, aperture, and bracketing are made in increments equivalent to / EV (1/3 step, the default
option) or / EV (1/2 step).
11: Exposure Comp. (P, S, A, and M Modes Only)
If Off (the default option) is selected, exposure compensation is set by
pressing the
button and rotating the main command dial ( 54).
Select On to set exposure compensation using only a command dial.
The dial used depends on the option selected for Custom Setting 15
(Command dials; 91):
Mode
P
S
A
M
Custom Setting 15 (Command dials): Off
Sub-command dial
Sub-command dial
Main command dial
Exposure compensation set by pressing
Custom Setting 15 (Command dials): On
Sub-command dial
Main command dial
Sub-command dial
button and rotating main command dial
If On is selected, the 0 at the center of the exposure display will blink even when exposure
compensation is set to ±0. This option is not available in mode M.
Menu Guide / Custom Settings
89
12: Center-Weighted (P, S, A, and M Modes Only)
This option controls the size of the area in the center of the viewfinder
assigned the greatest weight in center-weighted metering. The default
option is Φ 8 mm.
13: Auto BKT Set (P, S, A, and M Modes Only)
The following options are available:
Option
AE & flash
(default)
AE only
Description
Camera varies flash level and exposure with each shot.
Camera varies exposure with each shot.
Camera varies flash level with each shot (i-TTL and, with the opFlash only
tional SB-800 Speedlight, auto aperture modes only; 119, 120).
Each time the shutter is released, the camera creates multiple images “bracketing” the
current white balance setting. Only one shot is required to complete the bracketing sequence. White balance bracketing is recommended when shooting under mixed lightWB bracketing
ing or experimenting with different white balance settings. Not available at a whitebalance of (Choose color temp.) or at image qualities of NEF (RAW), NEF+JPEG
Fine, NEF+JPEG Normal, or NEF+JPEG Basic.
For information on recording photographs at settings of AE & flash, AE only, and Flash
only, see “Bracketing” ( 56). To take photographs using white balance bracketing:
1 Highlight WB bracketing and press the multi selector right.
the button and rotate the main command dial to choose the number of images
2 Press
in the bracketing sequence.
the button and rotate the sub-command dial to choose the white balance ad3 Press
justment. Each increment is roughly equivalent to 10 mired.
90
Menu Guide / Custom Settings
Compose a photograph, focus, and shoot. Each shot will be pro4 cessed
to create the number of copies specified in the bracketing
program, and each copy will have a different white balance. Modifications to white balance are added to the white balance adjustment made with white balance fine-tuning.
If the number of images in the bracketing program exceeds the number of exposures
remaining,
(
) will be displayed and the number of exposures remaining will
blink. Shooting can begin if a new memory card is inserted.
button and rotate the main comTo cancel bracketing, press the
mand dial until the number of shots in the bracketing sequence is zero
and
is no longer displayed in the control panel. The program
last in effect will be restored the next time bracketing is activated.
Bracketing can also be cancelled by performing a two-button reset (
44), although in this case the bracketing program will not be restored
the next time bracketing is activated.
14: Auto BKT Order (P, S, A, and M Modes Only)
Choose the order in which bracketing is performed.
Option
Description
Default order
Unmodified > negative > positive (
(default)
Under > MTR > over Negative > unmodified > positive (
56).
56, 140).
15: Command Dials (P, S, A, and M Modes Only)
Choose the command dials used to set shutter speed and aperture.
Option
Default (default)
Reversed
Description
The main command dial controls shutter speed, the subcommand dial aperture.
The main command dial controls aperture, the sub-command dial shutter speed.
White Balance Bracketing
Selecting NEF (RAW), NEF+JPEG Fine, NEF+JPEG Normal, or NEF+JPEG Basic for image quality
( 34) or (Choose color temp.) for white balance ( 58) cancels white balance bracketing.
Bracketing Programs
See the Appendix for a list of white balance bracketing programs.
Menu Guide / Custom Settings
91
16: FUNC Button (All Modes)
Choose the function performed by the FUNC. button.
Option
ISO display
(default)
Framing grid
AF-area mode
Center AF area
FV lock
Flash off
Matrix metering
Center-weighted
Spot metering
Description
The modified value for ISO sensitivity is displayed while the FUNC. button is pressed.
Press the FUNC. button and rotate the main command dial to turn the grid display in
the viewfinder on and off ( 89).
Press the FUNC. button and rotate the main command dial to select AF area mode
( 87).
Press the FUNC. button and rotate the main command dial to choose between normal and wide center AF areas ( 87).
If the built-in flash or an optional SB-800, SB-600, SB-400, or SB-R200 flash unit is used, flash
value locks when the FUNC. button is pressed ( 93). Press again to cancel FV lock.
Built-in flash and optional Speedlights turn off while the FUNC. button is pressed.
Matrix metering is activated while the FUNC. button is pressed (P, S, A, and M modes
only).
Center-weighted metering is activated while the FUNC. button is pressed (P, S, A, and
M modes only).
Spot metering is activated while the FUNC. button is pressed (P, S, A, and M modes
only).
FV Lock
This feature is used to lock flash output, preventing the flash level from changing between
shots or while recomposing photographs. Flash output is adjusted automatically for any
changes in ISO sensitivity or aperture.
FV Lock
Both the FUNC. and the AE-L/AF-L button can be used for FV lock. FV lock using the FUNC. button is described below; to use the AE-L/AF-L button, choose FV lock for Custom Setting 18 (AE-L/AF-L; 94).
1 Select FV lock for Custom Setting 16 (FUNC button).
Raise the flash. In , , , and modes, the flash will pop up au2 tomatically
as required when the shutter-release button is pressed
halfway. In P, S, A, and M modes, press the
flash.
92
Menu Guide / Custom Settings
button to raise the
the subject in the center of the frame and press the shut3 Position
ter-release button halfway to focus. Check that the flash-ready indicator ( ) is displayed in the viewfinder.
Press the FUNC. button. The flash will emit a monitor preflash to
4 determine
the appropriate flash level. Flash output will be locked
at this level and a flash-value lock icon will appear in the viewfinder.
5 Recompose the photograph.
the shutter-release button the rest of the way down to shoot.
6 Press
If desired, additional pictures can be taken without releasing FV
lock.
the FUNC. button to release FV lock and confirm that the
7 Press
icon is no longer displayed in viewfinder.
17: Illumination (All Modes)
If Off (the default option) is selected, the control panel backlight (LCD
illuminator) will turn on only when the power switch is rotated to . If
On is selected, the backlight will remain on while the exposure meters
are active (note that this will increase the drain on the battery).
Using FV Lock with Optional Speedlights
FV lock is also available with SB-800, SB-600, SB-400 and SB-R200 Speedlights (available separately). Set
the Speedlight to TTL mode (the SB-800 can also be used in AA mode; see the Speedlight manual for
details). While FV lock is in effect, flash output will automatically be adjusted for changes in Speedlight
zoom head position.
When Commander mode is selected for Custom Setting 22 (Built-in flash;
96), FV lock can be
used with remote SB-800, SB-600, or SB-R200 flash units if (a) any of the built-in flash, flash group A, or
flash group B is in TTL mode, or (b) a flash group is composed entirely of SB-800 Speedlights in TTL or
AA mode.
Using FV Lock with the Built-in Flash
When the built-in flash is used alone, FV lock is only available if TTL (the default setting) is selected for
Custom Setting 22 (Built-in flash; 95).
Menu Guide / Custom Settings
93
18: AE-L/AF-L (All Modes)
Choose the function performed by the AE-L/AF-L button.
Option
AE/AF lock
(default)
AE lock only
AF lock
Description
Both focus and exposure lock while the AE-L/AF-L button is pressed.
Exposure locks while the AE-L/AF-L button is pressed. Focus is unaffected.
Focus locks while the AE-L/AF-L button is pressed. Exposure is unaffected.
Exposure locks when the AE-L/AF-L button is pressed and remains locked until the
AE lock hold
button is pressed again or the exposure meters turn off.
The AE-L/AF-L button initiates autofocus. The shutter-release button can not be used
AF-ON
to focus.
If the built-in flash or an optional SB-800, SB-600, or SB-R200 flash unit is used, flash
FV lock
value locks when the AE-L/AF-L button is pressed ( 92). Press again to cancel FV
lock.
Focus area
Press the AE-L/AF-L button and rotate the sub-command dial to select the focus area
selection
( 30).
Press the AE-L/AF-L button to lock focus and exposure, press and rotate the sub-comAE-L/AF-L/AF area
mand dial to select the focus area.
Press the AE-L/AF-L button to lock exposure, press and rotate the sub-command dial
AE-L/AF area
to select the focus area.
Press the AE-L/AF-L button to lock focus, press and rotate the sub-command dial to
AF-L/AF area
select the focus area.
Press the AE-L/AF-L button to initiate autofocus, press and rotate the sub-command
AF-ON/AF area
dial to select the focus area.
19: AE Lock (All Modes)
If Off (the default option) is selected, pressing the shutter-release button halfway does not lock exposure. If On is selected, exposure will lock
when the shutter-release button is pressed halfway.
20: Focus Area (All Modes)
At the default setting of No wrap, the focus-area display is bounded by
the outer focus areas so that, for example, pressing the multi selector
up when the focus area is selected has no effect. Select Wrap to allow
focus-area selection to “wrap around” from top to bottom, bottom to
top, right to left, and left to right.
94
Menu Guide / Custom Settings
21: AF Area Illumination (All Modes)
At the default setting of Auto, the active focus area is highlighted in
the viewfinder as need to establish contrast with the background. If
Off is selected, the focus area is not highlighted. If On is selected, the
focus area will always be highlighted, although it may be difficult to see
against the background.
22: Built-in Flash (P, S, A, and M Modes Only)
Choose a flash control mode for the built-in flash.
TTL (default): Flash output is adjusted automatically in response to
shooting conditions.
Manual: The flash fires at the level selected in the menu shown at right.
At full power, the built-in flash has a Guide Number of 13/42 (m/ft., ISO
100, 20 ˚C/68 ˚F). No monitor preflash is emitted.
Repeating flash: The flash fires repeatedly while the shutter is open, producing a strobe-light effect. Selecting this option displays the menu
shown at right. Press the multi selector left or right to highlight the
following options, up or down to change.
Option
Output
Times
Freq.
Description
Choose flash output (expressed as a fraction of full power).
Choose the number of times the flash fires at the selected output.
The options available depend on the option selected for Output.
The number of times the flash fires per second.
“Times”
The number of times the flash can fire in succession is determined by flash output. Note that depending on shutter speed and the option selected for Freq., the actual number of flashes emitted may be
less than selected.
Output
1/4
1/8
1/16
1/32
1/64
1/128
Options available for “Times”
2
2–5
2–10
2–10, 15
2–10, 15, 20, 25
2–10, 15, 20, 25, 30, 35
Menu Guide / Custom Settings
95
Commander mode: Use the built-in flash as a master flash controlling one
or more remote optional SB-800, SB-600, or SB-R200 flash units in up to
two groups (A and B) using advanced wireless lighting. Selecting this
option displays the menu shown at right. Press the multi selector up or
down to highlight the following options, up or down to change.
• Built-in flash: Choose a flash control mode for the built in flash.
i-TTL mode. Choose a flash compensation (Comp.) value between +3.0 and –3.0 EV in steps of
will be displayed in the control panel and viewfinder.
/ EV. At settings other than ±0,
Choose from output levels between 1/1 (full power) and 1/128 (/ of full power).
flashes
M
in the control panel and viewfinder.
does not appear in control panel
Built-in flash does not fire, but AF-assist illuminator lights.
-flash mode display. Note that the built-in flash must be raised to emit monitor preflashes.
TTL
• Group A/Group B: Choose a flash control mode for all flash units in Group A or B.
TTL i-TTL mode. Choose a Comp. value between +3.0 and –3.0 EV in steps of / EV.
Auto aperture. Choose a flash compensation (Comp.) value between +3.0 and –3.0 EV in steps
AA
of / EV. SB-600 and SB-R200 flash units will not fire when this option is selected.
M Choose from output levels between 1/1 (full power) and 1/128 (/ of full power).
- - The flash units in the selected group do not fire.
• Channel: Choose from channels 1–4. All flash units in both groups must be set to the same
channel.
To take photographs in commander mode:
the flash control mode and output level for the built-in
1 Choose
flash. Note that output level can not be adjusted when - - is selected for flash control mode.
the flash control mode and output level for the flash units
2 Choose
in group A.
the flash control mode and output level for the flash units
3 Choose
in group B.
4 Select the channel.
96
Menu Guide / Custom Settings
5 Press OK.
Compose the shot and arrange the flash units as shown below. Note that the maxi6 mum
distance at which the remote flash units can be placed may vary with shooting
conditions.
60°–30°
5 m/16 ft. or less
10 m/33 ft. or less
30° or less
Wireless remote sensors
on flash units should
face camera.
Camera
(built-in flash)
30° or less
5 m/16 ft. or less
60°–30°
all the remote flash units on and set them to the channel selected in Step 4. See
7 Turn
the Speedlight instruction manuals for details.
the
button to raise the built-in flash. Note that even if
8 -Press
- is selected for Built-in flash > Mode, the built-in flash must be
raised so that monitor preflashes will be emitted.
and shoot after confirming that the flash-ready lights on the camera and all re9 Focus
mote flash units are lit.
Commander Mode
Position the sensor windows on the remote flash units to pick up the monitor preflashes from the builtin flash (particular care is required when not using a tripod). Be sure that direct light or strong reflections from the remote flash units do not enter the camera lens (in TTL mode) or the photocells on the
remote flash units (AA mode), as this may interfere with exposure. To prevent timing flashes emitted
by the built-in flash from appearing in photographs taken at short range, choose low ISO sensitivities
and small apertures (large f-numbers) or use an optional SG-3IR infrared panel for the built-in flash. An
SG-3IR is required for best results with rear-curtain sync, which produces brighter timing flashes. After
positioning the remote flash units, take a test shot and view the results in the camera monitor.
Although there is no limit on the number of remote flash units that may be used, the practical maximum is three. With more than this number, the light emitted by the remote flash units will interfere
with performance.
Flash compensation (
55) is added to the flash output for all flash units, including the built-in flash.
Menu Guide / Custom Settings
97
23: Flash Warning (P, S, A, and M Modes Only)
If On (the default setting) is selected and lighting is poor, the flashready light ( ) will flicker in the viewfinder when the shutter-release
button is pressed halfway to warn that the built-in flash is required. No
warning will be displayed if Off is selected.
24: Flash Shutter Speed (P, S, A, and M Modes Only)
Choose the slowest shutter speed at which the flash will be used in
modes P and A (the default setting is 1/60 s). Regardless of the setting
chosen, the flash will fire at shutter speeds as slow as 30 s when set to
slow sync ( 41).
25: Auto FP (P, S, A, and M Modes Only)
Select On to activate Auto FP High-Speed Sync when using the optional SB-800, SB-600, or SB-R200 flash units at shutter speeds faster
than / s (because the actual shutter speed may be slightly slower
than displayed in P and A modes, Auto FP may not always be activated
at a shutter speed of / s). Choose to enable fill flash when taking
portraits under bright light or when taking photographs at Large apertures. Auto FP High-Speed Sync is not available when using the built-in
flash. The default setting is Off.
26: Modeling Flash (P, S, A, and M Modes Only)
If On is selected, the built-in flash and optional SB-800, SB-600, and SBR200 flash units will emit a modeling flash when the camera depth-offield preview button is pressed ( 49). The default setting is Off.
27: Monitor-Off (All Modes)
Choose how long the monitor remains on when no operations are performed (the default setting is 20 s). Choose a shorter monitor-off delay
for longer battery life. Regardless of the setting chosen, the monitor
remains on for four seconds during image review ( 88) and for ten
minutes when the camera is powered by an optional EH-5/EH-5a AC
adapter.
98
Menu Guide / Custom Settings
28: Auto Meter-Off (All Modes)
Choose how long the camera continues to meter exposure when no
operations are performed (the default setting is 6 s). Choose a shorter
meter-off delay for longer battery life. Regardless of the setting chosen,
the exposure meters remain on for ten minutes when the camera is
powered by an optional EH-5/EH-5a AC adapter.
29: Self-Timer (All Modes)
Choose the length of the shutter-release delay in self-timer mode (
37). The default setting is 10 s.
30: Remote On Duration (All Modes)
Choose how long the camera will wait for a signal from the remote
before cancelling delayed or quick-response remote modes ( 38).
Choose shorter times for longer battery life. The default setting is one
minute.
31: Exp. Delay Mode (All Modes)
Select On to delay shutter release until about 0.4 s after the shutterrelease button is pressed, reducing camera shake in situations in which
the least camera movement could result in blurred photographs (for
example, microscope photography). The default option is Off.
Menu Guide / Custom Settings
99
32: MB-D80 Batteries (All Modes)
To ensure that the camera functions as expected when AA batteries are
used in the optional MB-D80 battery pack, match the option selected in
this menu to the type of batteries inserted in the battery pack. There is
no need to adjust this option when using EN-EL3e batteries.
Option
LR6 (AA alkaline)
(default)
HR6 (AA Ni-MH)
FR6 (AA lithium)
ZR6 (AA Ni-Mn)
Description
Select when using LR6 alkaline AA batteries.
Select when using HR6 NiMH AA batteries.
Select when using FR6 lithium AA batteries.
Select when using ZR6 nickel-manganese AA batteries.
Using AA Batteries
EN-EL3e batteries are recommended for best performance. Fewer pictures can be taken with AA batteries than with EN-EL3e batteries. The capacity of AA batteries drops sharply at temperatures below
20 ˚C (68 ˚F) and varies with make and storage conditions; in some cases, batteries may cease to function before their expiry date. Some AA batteries can not be used; due to their performance characteristics and limited capacity, alkaline and nickel-manganese batteries should only be used when no other
alternative is available. The camera shows the level of AA batteries as follows:
Control panel
Viewfinder
–
(blinks)
(blinks)
Description
Batteries fully charged.
Low battery. Ready fresh batteries.
Shutter release disabled. Insert fresh batteries.
100 Menu Guide / Custom Settings
Basic Camera Settings: The Setup Menu
The setup menu contains the options listed below (options displayed
may differ if My Menu is selected for CSM/Setup menu). See “Using
Camera Menus” ( 9) for more information on using the menus.
The following options are available when To display the following options, select Full
Simple (the default option) is selected for for CSM/Setup menu:
CSM/Setup menu:
Option
Option
CSM/Setup menu
Format memory card
World time
LCD brightness
Video mode
Language
USB
101–102
102
103
103
103
103
104
Image comment
104
Folders
105
File no. sequence
106
106
Mirror lock-up *
Dust off ref photo
106–107
Battery info
107
Firmware version
108
Auto image rotation
108
* Not available at battery levels of
or below
or when camera is powered by optional MBD80 battery pack with AA batteries.
CSM / Setup Menu
Choose the options displayed in the menus.
Option
Simple
(default)
Full
My menu
Description
Display only basic options in the Custom Settings ( 86) and
setup menus (see above). Other menus list all options.
Display all options in all menus.
Display only selected options in the playback, shooting, Custom
Settings, setup, and retouch menus.
To choose menu items for display with My menu:
My menu and press the multi selector right.
1 Highlight
menu names will be displayed.
A list of
Highlight a menu name and press OK. The items in the selected
2 menu
will be listed as shown at right (the illustration shows the
items listed when the playback menu is selected). The CSM / Setup menu item in the setup menu can not be selected.
Menu Guide / Basic Camera Settings: The Setup Menu 101
the multi selector up or down to highlight items and then
3 Press
press to the right to select or deselect. Selected items are indicated by a check mark.
Done and press OK to return to the list of menu names
4 Highlight
shown in Step 1. Repeat steps 2–3 to edit additional menus.
Done in the list of menu names and press OK to return
5 Highlight
setup menu.
Format Memory Card
Select Yes to format the memory card. Note that this permanently deletes all photographs and any other data the card may contain. Be sure
that any valued files have been copied to a computer before formatting.
Formatting Memory Cards
Do not turn the camera off or remove the memory card while formatting is in
progress.
Two-Button Format
Memory cards can also be formatted with the
(
and
102 Menu Guide / Basic Camera Settings: The Setup Menu
) buttons (
44).
World Time
Set the camera clock to the current date and time.
Option
Description
Choose the time zone. The camera clock will automatically be
Time zone
reset to the time in the selected zone.
Set the camera clock ( 14). Reset the clock regularly for acDate
curate time keeping.
Date
Choose the order in which the month, day, and year are disformat
played.
Daylight Turn daylight saving time on or off. The camera clock is autosaving time matically advanced or set back one hour.
LCD Brightness
Adjust monitor brightness between –2 (darkest) and +2 (brightest).
Video Mode
Choose NTSC when connecting the camera to an NTSC television or
VCR. Choose PAL when connecting the camera to a PAL video device.
Language
Choose the language for camera menus and messages from:
De
En
Es
Fi
Fr
It
Nl
Pl
Deutsch
English
Español
Suomi
Français
Italiano
Nederlands
Polski
German
English
Spanish
Finnish
French
Italian
Dutch
Polish
Pt Português
Ru Русский
Sv Svenska
Portuguese
Russian
Swedish
Traditional Chinese
Simplified Chinese
Japanese
Korean
The Clock Battery
The camera clock is powered by an independent, rechargeable power source, which is charged
as necessary when the main battery is installed or the camera is powered by an optional EH-5/
EH-5a AC adapter. Two days of charging will power the clock for about one month. If
flashes
in the control panel, the clock battery is exhausted and the clock has been reset to a time starting at
2006.01.01.00:00:00. Set the clock to the correct date and time.
Menu Guide / Basic Camera Settings: The Setup Menu 103
USB
Choose a USB option for connection to a computer or PictBridge
printer. Choose MTP/PTP when connecting to a PictBridge printer or using Camera Control Pro 2 or Camera Control Pro (both
available separately). See “Connecting to a Computer” for information on selecting a USB option for use with Nikon Transfer
( 67).
Image Comment
Add a comment to photographs as they are taken. Comments can be
viewed in ViewNX (supplied) or Capture NX (available separately;
123).
• Done: Save changes and return to the setup menu.
• Input comment: The following dialog will be displayed. Input a comment as described below.
Image Comment
to
Keyboard area: Use multi selector to highlight letters, press
select.
Name area: Comment appears here. To move cursor, press button and use multi selector.
Comments can be up to thirty-six characters long. Any additional characters will be deleted. To delete the character at the current cursor position, press . Press OK to save
changes and return to the image comment menu, or press
to exit without changing
the comment.
• Attach comment: A comment is added to all photographs taken while this option is checked.
Highlight this option and press the multi selector to the right to toggle the check mark on
or off.
104 Menu Guide / Basic Camera Settings: The Setup Menu
Folders
Create, rename, or delete folders or choose the folder in which new
photographs will be stored.
• Select folder: Choose the folder in which subsequent photographs will
be stored.
NCD80
(default folder)
Current folder
Other folders
(in alphabetical order)
• New: Create a new folder and name it as described in “Naming Folders,” below.
• Rename: Select a folder from a list and rename it as described in “Naming Folders,” below.
• Delete: Delete all empty folders on the memory card.
Naming Folders
Keyboard area: Use multi selector to highlight letters, press
to
select.
Name area: Folder name appears here. To move cursor, press
button and use multi selector.
Folder names can be up to five characters long. Any additional characters will be deleted.
To delete the character at the current cursor position, press . Press OK to save changes
and return to the setup menu, or press to exit without creating a new folder or changing the folder name.
Folder Names
On the memory card, folder names are preceded by a three-digit folder number assigned automatically by the camera (e.g., 100NCD80). Each folder can contain up to 999 photographs. During shooting, pictures are stored in the highest-numbered folder with the selected name. If a photograph is
taken when the current folder if full or contains a photograph numbered 9999, the camera will create
a new folder by adding one to the current folder number (e.g., 101NCD80). The camera treats folders
with the same name but different folder numbers as the same folder. For example, if the folder NIKON
is selected for Select folder, photographs in all folders named NIKON (100NIKON, 101NIKON, 102NIKON,
etc.) will be visible when Current is selected for Playback folder ( 75). Renaming changes all folders
with the same name but leaves the folder numbers intact.
Menu Guide / Basic Camera Settings: The Setup Menu 105
File No. Sequence
Choose how the camera names files.
• Off (default): File numbering is reset to 0001 when a new folder is created, the memory card is formatted, or a new memory card is inserted.
• On: File numbering continues from the last number used after a new
folder is created, the memory card is formatted, or a new memory card
is inserted. If a photograph is taken when the current folder contains a photograph numbered 9999, a new folder will be created and file numbering will begin again from 0001.
• Reset: As for On, except that file numbering is reset to 0001 with the next photograph taken
(if the current folder already contains photographs, a new folder will be created).
File Numbering
If the current folder is numbered 999 and contains 999 photographs or a photograph numbered 9999,
the shutter release will be disabled. If File no. sequence is on, turn it off and format the memory card
or insert another memory card in the camera.
Mirror Lock-Up
Lock the mirror in the up position when inspecting or cleaning the lowpass filter that protects the camera image sensor ( 125).
Dust Off Ref Photo
Acquire reference data for the Image Dust Off option in Capture NX
(available separately; for more information, see the Capture NX manual).
On and press the multi selector right. The message
1 Highlight
shown at right will be displayed, and “rEF” will be displayed in the
control panel and viewfinder.
106 Menu Guide / Basic Camera Settings: The Setup Menu
With the lens ten centimeters (four inches) from a well-lit, featureless white object,
2 frame
the object so that it fills the viewfinder and then press the shutter-release button
halfway. In autofocus mode, focus will automatically be set to infinity; in manual focus
mode, set focus to infinity manually.
the shutter-release button the rest of the way down to acquire Image Dust Off
3 Press
reference data. The monitor turns off when the shutter-release button is pressed.
If the reference object is too bright or too dark, the camera may be
unable to acquire Image Dust Off reference data and the message
shown at right will be displayed. Choose another reference object
and repeat the process from Step 1.
Image Dust Off
Dust off ref photo is available with CPU lenses only. A lens with a focal length of at least 50 mm is
recommended. If using a zoom lens, zoom all the way in.
The same reference image can be used for photographs taken with different
lenses or at different apertures. Reference images can not be viewed using
computer imaging software. A grid pattern is displayed when reference images are viewed on the camera.
Battery Info
View information on the EN-EL3e rechargeable Li-ion battery currently
inserted in the camera. (If the camera is powered by an optional MBD80 battery pack containing EN-EL3e batteries, information for each
battery will be listed separately. Battery info can not be displayed when
MB-D80 is used with AA batteries).
Option
Description
Bat. meter The current battery level as a percentage of full charge.
The number of times the shutter has been released since the battery was last charged.
Pic. meter Note that the camera may sometimes release the shutter without recording a photograph (e.g., when measuring a value for preset white balance).
A five-level display showing battery age, from 0 (new) to 4 (displayed when the battery
has reached the end of its charging life and requires replacement). Note that charging
Charge life
life may be temporarily reduced if the battery has been charged at low temperatures;
the display will return to normal if the battery is charged again at room temperature.
Menu Guide / Basic Camera Settings: The Setup Menu 107
Firmware Version
View the current camera firmware version.
Auto Image Rotation
Photographs taken while On (the default option) is selected contain
information on camera orientation, allowing them to be rotated automatically during playback ( 61) or when viewed in ViewNX (supplied)
or Capture NX (available separately; 123). * The following orientations are recorded:
Landscape (wide)
orientation
Camera rotated 90 °
clockwise
Camera rotated 90 °
counter-clockwise
* In continuous mode ( 36), orientation recorded for first shot applies to all images in same burst,
even if camera orientation is changed during shooting.
Camera orientation is not recorded when Off is selected. Choose this option when taking
photographs with the lens pointing up or down.
108 Menu Guide / Basic Camera Settings: The Setup Menu
Creating Retouched Copies: The Retouch Menu
The options in the retouch menu are used to create trimmed, resized, or
retouched copies of the photographs on the memory card. The following options are available (options displayed may differ if My menu is
selected for the CSM/Setup option in the setup menu; 101). See “Using Camera Menus” ( 9) for more information on using the menus.
Option
D-lighting
Red-eye correction
Trim
Monochrome
Filter effects
Small picture
Image overlay
Description
Brighten dark or back-lit subjects.
Correct “red-eye” caused by the flash.
Create cropped copies of existing photographs.
Copy pictures in black-and-white, sepia, or cyanotype.
Create copies with color filter effects.
Create small copies of existing photographs.
Combine two RAW photographs into a single image.
110
111
111
112
112
112–113
114–115
Except in the case of Image overlay, the photographs to be copied can be selected in fullframe playback or from the retouch menu. To copy photos during full-frame playback:
1
2
Display photo in full-frame playback (
3
61).
Display retouch menu.
4
Highlight menu item. *
Display retouch options. †
* Image overlay is not available during full-frame playback.
† If sub-menu is displayed, repeat Steps 2–3 to select options from sub-menu. To exit to full-frame
playback without creating modified copy, press
button.
Retouching Copies
Copies created with Small picture or Trim can not be further modified. D-lighting, red-eye correction, and filter effects can not be applied to monochrome copies. Otherwise the options in the
retouch menu can each be applied once to existing copies, although this may result in loss of quality.
Image Quality
Small picture creates JPEG Fine copies (1 : 4 compression ratio). Image overlay creates copies at the
current image quality setting. Other options copy RAW photos as JPEG Fine quality images; save where
otherwise noted, copies created from RAW photos are 3,872 × 2,592 pixels in size.
Menu Guide / Creating Retouched Copies: The Retouch Menu 109
To copy photos from the retouch menu:
1
2
Highlight menu item.
3
Display selection screen.
4
Highlight photo. *
Display retouch options. †
* Photos can also be highlighted using command dials: main command dial moves cursor horizontally,
sub-command dial moves cursor vertically. To view selected picture full frame, press and hold
button.
button.
† To exit to playback mode without creating modified copy, press
D-Lighting
D-lighting brightens shadows, making it ideal for dark or back-lit photographs.
Before
After
Press the multi selector up or down to choose the amount of correction
performed. The effect can be previewed in the edit display. Press OK
to copy the photograph and return to the retouch menu or full-frame
playback.
Retouching Photographs
The D80 may be unable to display or retouch photographs that were created with other models of
camera or that have been modified using a computer or other device.
110 Menu Guide / Creating Retouched Copies: The Retouch Menu
Red-Eye Correction
Selecting this option displays a preview image as shown below. Confirm the effects of redeye correction and create a corrected copy as described in the following table. Note that
red-eye correction may not always produce the expected results and may in very rare circumstances be applied to portions of the image that are not affected by red eye; check the
preview thoroughly before proceeding. Red-eye correction is available only with photographs taken using the flash.
To
Use
Zoom in and out
/
View other areas
of image
Create copy
Description
Press
to zoom in,
to zoom out. While
photo is zoomed in, press multi selector up,
down, left, or right to view areas of image
not visible in monitor. Keep multi selector
pressed to scroll rapidly to other areas of
frame. Navigation window is displayed while
/
button or multi selector is pressed; area currently visible in
monitor is indicated by yellow border.
If the camera detects red eye in the selected photograph, a copy will
be created that has been processed to reduce its effects. No copy
will be created if the camera is unable to detect red eye.
Trim
Choosing this option displays the selected image full frame as shown below. To create a
cropped copy of the selected image:
To
Reduce or increase size of
crop
View other areas
of image
Create copy
Use
/
Description
Press
to reduce crop size,
to increase.
Press multi selector up, down, left, or right to
view areas of image not visible in monitor.
Save the area currently visible in the monitor as a separate file and
return to the retouch menu or full-frame playback.
Trim: Image Quality and Size
Copies created from NEF (RAW) or NEF (RAW)+JPEG photos (NEF (RAW), NEF (RAW) + JPEG Fine,
NEF (RAW) + JPEG Normal, and NEF (RAW) + JPEG Basic) have an image quality of JPEG Fine;
cropped copies created from JPEG photos (JPEG Fine, JPEG Normal, and JPEG Basic) have the
same image quality as the original. Depending on the size of the crop, the copy may be 2,560 × 1,920,
1,920 × 1,440, 1,280 × 960, 960 × 720, or 640 × 480 pixels in size.
Menu Guide / Creating Retouched Copies: The Retouch Menu 111
Monochrome
Choose from Black-and-white, Sepia, and Cyanotype (blue and
white monochrome).
Selecting Sepia or Cyanotype displays a preview of the selected image; press the multi selector up to increase color saturation, down to
decrease. Press OK to create a monochrome copy and return to the
retouch menu or full-frame playback.
Filter Effects
Choose from the following options. After adjusting filter effects as described below, press OK to copy the photograph and return to the retouch menu or full-frame playback.
Option
Skylight
Warm filter
Color
balance
Description
Creates the effect of a sky light filter, making the picture less
blue. The effect can be previewed in the monitor as shown at
right.
Creates a copy with warm tone filter effects, giving the copy
“warm” red cast. The effect can be previewed in the monitor.
Press the multi selector up to increase the amount of green,
right to increase the amount of red, left to increase the amount
of blue, or down to increase the amount of magenta. The effect
is displayed in the monitor together with red, green, and blue
histograms giving the distribution of tones in the copy ( 63).
Small Picture
Create a small copy of the selected picture. The following sizes are available:
Option
640 × 480
320 × 240
160 × 120
Description
Suited to television playback.
Suited to display on Web pages.
Suitable for e-mail.
The small picture option can be used during full-frame playback as described on page 109.
The procedure for selecting pictures after choosing Small picture from the retouch menu,
however, differs from that described at the beginning of this section: instead of selecting a
single photograph and then choosing a picture size, the user selects a picture size first and
then selects one or more photographs to copy at the selected size as described on the following page.
112 Menu Guide / Creating Retouched Copies: The Retouch Menu
Selecting Small picture from the retouch menu displays the menu shown in Step 1. Follow
the steps below to create small copies of multiple pictures.
1
2
Highlight Choose size.
3
Display options.
4
Highlight desired picture size.
5
Make selection and return to previous menu.
6
Highlight Select picture.
7
Display selection screen.
8
Select pictures ( 74). Selected pictures are
icon.
marked with
9
Confirmation dialog displayed.
10
Highlight Yes. *
Copy photos and return to retouch menu.
* To return to Step 7 without creating copies, highlight No and press OK. Press MENU to exit to retouch
menu without creating copies.
Viewing Small Pictures
Small pictures are indicated by a gray border during full-frame playback. Playback zoom is not available when small pictures are displayed.
Menu Guide / Creating Retouched Copies: The Retouch Menu 113
Image Overlay
Image overlay combines two existing RAW photographs to create a single picture that is
saved separately from the originals. The new picture is saved at current image quality and
size settings; before creating an overlay, set image quality and size ( 33; all options are available). To create a RAW image, choose an image quality of NEF (RAW).
Image overlay in the retouch menu and press the multi
1 Highlight
selector right. The preview dialog shown at right will be displayed
with Image 1 highlighted.
2 Press OK. A picture selection dialog will be displayed.
the multi selector left or right to highlight the first photo3 Press
graph in the overlay. To view the highlighted photograph full
frame, press and hold the
button.
OK to select the highlighted image and return to the preview
4 Press
display. The selected image will appear as Image 1.
exposure for the overlay by pressing the multi selector
5 Optimize
up or down to select the gain for image 1 from between 0.1 and
2.0. The default value is 1.0; selecting 0.5 cuts gain in half, while
selecting 2.0 doubles gain. The effects of gain are visible in the
Preview column.
Press the multi selector left or right to highlight Image 2. Repeat
6 Steps
2–5 to select the second photo and adjust gain.
114 Menu Guide / Creating Retouched Copies: The Retouch Menu
the multi selector left or right to highlight the Preview col7 Press
umn. Press the multi selector up or down to highlight one of the
following options and press OK.
• Overlay: Preview the overlay as shown at right. Press OK to save
the new image. To return to Step 6 and select new photos or
adjust gain, press .
• Save: Save the overlay without viewing a preview.
After an overlay is created, the camera will enter full-frame playback (
61) with the new picture displayed in the monitor.
+
Image Overlay
Only RAW photographs created with the D80 can be selected for image overlay. Other images are not
displayed on the selection screen. Hidden images are also not displayed on the selection screen and
can not be selected.
The overlay has the same photo info (including date of recording, metering, shutter speed, aperture,
exposure mode, exposure compensation, focal length, and image orientation) and values for white
balance and optimize image as the photograph selected for Image 1.
Menu Guide / Creating Retouched Copies: The Retouch Menu 115
Technical Notes
Optional Accessories
One advantage of digital SLR cameras is the wide variety of accessories they support. See
our web sites or product catalogs for up-to-date information on accessories for the D80.
Battery packs
Flash units
(Speedlights)
Viewfinder
accessories
Lenses
Batteries
AC adapters
ML-L3 remote control
Filters
MC-DC1 remote cord
Software
Use Only Nikon Brand Electronic Accessories
Only Nikon brand accessories certified by Nikon specifically for use with your Nikon digital camera are
engineered and proven to operate within its operational and safety requirements. THE USE OF NON-NIKON
ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WARRANTY.
Picture Angle and Focal Length
The size of the area exposed by a 35mm camera is 36 × 24
mm. The size of the area exposed by the D80, in contrast, is 23.6 × 15.8 mm, meaning that the picture angle
of a 35mm camera is approximately 1.5 times that of the
D80. The approximate focal length of lenses for the D80
in 35mm format can be calculated by multiplying the focal length of the lens by about 1.5.
Picture size (35mm format)
(36 × 24 mm)
Lens f-number
The f-number given in lens names is the maximum aperture of the lens.
116 Technical Notes / Optional Accessories
Picture diagonal
Lens
Picture size (D80)
(23.6 × 15.8 mm)
Picture angle (35mm format)
Picture angle (D80)
Lenses
CPU lenses (particularly type G and D lenses) are recommended for use with the D80. CPU
lenses can be identified by the presence of CPU contacts, type G and D lenses by a letter on
the lens barrel. Type G lenses are not equipped with a lens aperture ring.
Aperture
ring
CPU lens
Type G lens
Type D lens
The following CPU lenses can be used with the D80. IX Nikkor CPU lenses can not be used.
Camera setting
Lens/accessory
Type G or D AF Nikkor 2; AF-S, AF-I Nikkor
PC-Micro Nikkor 85mm f/2.8D 3
AF-S/AF-I Teleconverter 5
Other AF Nikkor (except lenses for F3AF)
AI-P Nikkor
AF
✔
—
✔6
✔7
—
Focus
M (with electronic
rangefinder)
✔
✔4
✔6
✔7
✔8
M
✔
✔
✔
✔
✔
Mode
Digital Vari Program,
P, S, A
✔
—
✔
✔
✔
Metering
M
✔
✔
✔
✔
✔
,
,
1
✔
✔
✔
✔
✔
• AF-S NIKKOR VR: 400 mm f/2.8G ED, 500 mm f/4G ED*, 600 mm f/4G
1. Spot metering meters selected focus area.
ED*
2. Vibration Reduction (VR) supported with VR lenses.
3. Camera exposure metering and flash control may not function when • AF-I: 300 mm f/2.8D ED, 400 mm f/2.8D ED, 500 mm f/4D ED*, 600 mm
lens is shifted and/or tilted or aperture is not at maximum.
f/4D ED*
4. Electronic rangefinder can not be used when shifting or tilting lens.
* Autofocus not available with AF-S teleconverter TC-17E II/TC-20E II.
5. Compatible with the following lenses:
6. With maximum effective aperture of f/5.6 or faster.
• AF-S: 80–200 mm f/2.8D ED, 300 mm f/2.8D ED II, 300 mm f/2.8D ED, 7. If AF 28–85 mm f/3.5–4.5, AF 28–85 mm f/3.5–4.5 <New>, AF
300 mm f/4D ED*, 400 mm f/2.8D ED II, 400 mm f/2.8D ED, 500 mm 35–70 mm f/2.8, or AF 80–200 mm f/2.8 is zoomed while focusing at
f/4D ED II*, 500 mm f/4D ED*, 600 mm f/4D ED II*, 600 mm f/4D ED*
minimum range, image on matter screen in viewfinder may not be in
• AF-S VR: 70–200 mm f/2.8G ED, 200 mm f/2G ED, 200–400 mm f/4G focus when in-focus indicator is displayed. Focus manually using image
ED, 300 mm f/2.8G ED
in viewfinder as guide.
• AF-S Micro VR: 105 mm f/2.8G ED (autofocus not supported)
8. With maximum aperture of f/5.6 or faster.
Non-CPU Lenses
The non-CPU lenses listed below may be used, but only when the camera is in mode M. Selecting
another mode disables the shutter release. Aperture must be adjusted manually via the lens aperture
ring and the camera autofocus system, metering, electronic analog exposure display, and TTL flash
control can not be used. Except where otherwise noted, the electronic rangefinder can be used with
lenses that have a maximum aperture of f/5.6 or faster.
• AI-, AI-modified NIKKOR, or Nikon Series E lenses • AI-type teleconverter *
• Medical-NIKKOR 120 mm f/4 (can only be used • Bellows Focusing Attachment PB-6 (attach in
at shutter speeds slower than 1/60 s)
vertical orientation; can be used in horizontal
• Reflex-NIKKOR (electronic rangefinder can not
orientation once attached) *
be used)
• Auto Extension Ring* PK-11A/12/13, PN-11
* Electronic rangefinder can be used if maximum ef• PC-NIKKOR (electronic rangefinder can not be
fective aperture is f/5.6 or faster.
used when shifting or tilting lens)
Technical Notes / Optional Accessories 117
Incompatible Non-CPU Lenses and Accessories
The following non-CPU lenses and accessories can NOT be used:
• AF Teleconverter TC-16A
• Non-AI lenses
• Lenses that require the Focusing Unit AU-1 (400 mm
f/4.5, 600 mm f/5.6, 800 mm f/8, 1200 mm f/11)
• Fisheye (6 mm f/5.6, 8 mm f/8, OP 10 mm f/5.6)
• 2.1 cm f/4
• Extension Ring K2
• 180–600 mm f/8 ED (serial numbers 174041–174180)
• 360–1200 mm f/11 ED (serial numbers 174031–174127)
• 200–600 mm f/9.5 (serial numbers 280001–300490)
• AF-Nikkor lenses for the F3AF (AF 80mm f/2.8, AF
200mm f/3.5 ED, AF Teleconverter TC-16)
• PC 28 mm f/4 (serial number 180900 or earlier)
• PC 35 mm f/2.8 (serial numbers 851001–906200)
• Old-model PC 35 mm f/3.5
• Old-model Reflex 1000 mm f/6.3
• Reflex 1000 mm f/11 (serial numbers 142361–143000)
• Reflex 2000 mm f/11 (serial numbers 200111–200310)
AF-Assist Illumination/Red-Eye Reduction
AF-assist illumination is not available with the following lenses:
• AF-S NIKKOR 14–24mm f/2.8G ED • AF 80–200 mm f/2.8D ED
• AF-S VR 70–200 mm f/2.8G ED
• AF-S 80–200 mm f/2.8D ED
• AF-S VR 200–400 mm f/4G ED
• AF VR 80–400 mm f/4.5–5.6D ED
• AF-S VR 200 mm f/2G ED
At ranges under 1 m (3 ft. 3 in.), the following lenses may block the AF-assist illuminator and interfere
with autofocus when lighting is poor:
• AF-S DX 12–24 mm f/4G ED
• AF-S 17–35 mm f/2.8D ED
• AF-S DX 17–55 mm f/2.8G ED
• AF 18–35 mm f/3.5–4.5D ED
• AF-S DX 18–70 mm f/3.5–4.5G ED
• AF-S DX VR 18–200 mm f/3.5–5.6G
• AF 20–35 mm f/2.8D
• AF-S NIKKOR 24–70mm f/2.8G ED
• AF-S 24–85 mm f/3.5–4.5G ED
• AF 24–85 mm f/2.8–4D
• AF-S VR 24–120 mm f/3.5–5.6G ED
• AF 24–120 mm f/3.5–5.6D
• AF-S 28–70 mm f/2.8D ED
• AF 28–200 mm f/3.5–5.6G ED
• AF Micro 70–180 mm f/4.5–5.6D ED
• AF-S VR Micro 105 mm f/2.8G ED
• AF Micro 200 mm f/4D ED
Lenses that block the subject’s view of the AF-assist illuminator can interfere with red-eye reduction.
The Built-in Flash
The built-in flash can be used with CPU lenses with focal lengths of 18 – 300 mm. The flash may be unable to light the entire subject with the following lenses at ranges less than those given below:
Lens
Zoom position
20 mm
AF-S DX 12–24 mm
f/4G ED
24 mm
24 mm
AF-S 17–35 mm
f/2.8D ED
28 mm, 35 mm
AF-S DX 17–55 mm
f/2.8G ED
Min. range
2.0 m / 6 ft. 7 in.
1.0 m / 3 ft. 3 in.
2.0 m / 6 ft. 7 in.
1.0 m / 3 ft. 3 in.
28 mm
1.5 m / 4 ft. 11 in.
35 mm
1.0 m / 3 ft. 3 in.
AF 18–35 mm f/3.5–
24 mm
4.5D ED
AF-S DX 18–70 mm
18 mm
f/3.5–4.5G ED
AF-S DX 18–135 mm
18 mm
f/3.5–5.6G ED
AF-S DX VR 18–
24 mm, 35 mm
200 mm f/3.5–5.6G ED
1.0 m / 3 ft. 3 in.
1.0 m / 3 ft. 3 in.
1.5 m / 4 ft. 11 in.
Lens
AF 20–35 mm f/2.8D
AF-S NIKKOR
24–70 mm f/2.8G ED
AF-S VR 24–120 mm
f/3.5–5.6G ED
AF-S 28–70 mm
f/2.8D ED
AF-S VR 200–400 mm
f/4G ED
Zoom position
Min. range
20 mm
1.5 m / 4 ft. 11 in.
24 mm
1.0 m / 3 ft. 3 in.
35 mm
1.0 m / 3 ft. 3 in.
24 mm
1.0 m / 3 ft. 3 in.
35 mm
1.5 m / 4 ft. 11 in.
50 mm
1.0 m / 3 ft. 3 in.
200 mm
3.0 m / 9 ft. 10 in.
250 mm,
300 mm
2.5 m / 8 ft. 2 in.
1.0 m / 3 ft. 3 in.
When used with the AF-S NIKKOR 14–24 mm f/2.8G ED, the flash will be unable to light the entire
subject at all ranges.
The built-in flash can also be used with compatible non-CPU lenses with a focal length of 18–200 mm.
AI and AI-S 200 mm f/2 ED lenses can not be used. Restrictions apply with the following lenses:
• AI-S 25–50 mm f/4, AI 25–50 mm f/4, AI-S 35–70 mm f/4: at 35mm zoom position, use at ranges of 1 m (3 ft. 3 in.) or more
• AI, AI-modified, and AI-S ED 50–300 mm f/4.5, AI-modified 85–250 mm f/4: use at 135mm or above
118 Technical Notes / Optional Accessories
Optional Flash Units (Speedlights)
Use the accessory shoe to mount optional flash units directly on
the camera without a sync cable. The accessory shoe is equipped
with a safety lock for Speedlights with a locking pin, such as the
SB-800, SB-600 and SB-400. Before attaching an optional flash
unit, remove the accessory shoe cover. The built-in flash will not
fire when an optional Speedlight is attached.
When used with compatible flash units such as the optional SB-800 and SB-600 Speedlights
or SB-R200 wireless remote Speedlight, the D80 supports the advanced Nikon Creative
Lighting System (CLS), including i-TTL flash control ( 141), FV lock (locks flash level; 92),
and Auto FP High-Speed Sync (synchronizes the flash and shutter at high shutter speeds).
With the built-in flash in commander mode, the D80 can be used to control remote SB-800,
SB-600, and SB-R200 flash units. See the Speedlight manual for details.
SB-800, SB-600, and SB-400 Speedlights
These high-performance Speedlights have Guide Numbers of 38/125 (35mm zoom head position), 30/98 (35mm zoom head position), and 21/69 respectively (m/ft, ISO 100, 20 °C/68 °F).
The flash head can be rotated through 90 ° above the horizontal for bounce-flash or close-up
photography. The SB-800 and SB-600 can also be rotated 180 ° left, and 90 ° right, and the
SB-800 can be rotated 7 ° below the horizontal. The SB-800 and SB-600 support auto power
zoom (24–105 mm and 24–85 mm, respectively), ensuring that the illuminating angle is adjusted in accord with lens focal length and have both a built-in wide panel that can be used
for an angle of 14 mm (the SB-800 also supports 17 mm) and an illuminator that can be used
when adjusting settings in the dark.
Use Only Nikon Flash Accessories
Use only Nikon Speedlights. Negative voltages or voltages over 250 V applied to the accessory shoe
could not only prevent normal operation, but damage the sync circuitry of the camera or flash. Before
using a Nikon Speedlight not listed in this section, contact a Nikon-authorized service representative
for more information.
Guide Number
To calculate the range of the flash at an ISO sensitivity of 100, divide the Guide Number by the aperture.
For example, the built-in flash has a Guide Number of 13 m or 42 ft. (ISO 100, 20 °C/68 °F); its range at an
aperture of f/5.6 is 13 ÷ 5.6 or about 2.3 meters (or in feet,42 ÷ 5.6 = about 7.5 ft). With Guide Numbers
of 38 and 30, the SB-800 and SB-600 respectively have ranges of about 6.8 and 5.4 meters (22.3 and 17.5
feet) at f/5.6 (35mm zoom head position).
The AS-15 Accessory Shoe Adapter
When the AS-15 accessory shoe adapter (available separately) is mounted on the camera accessory
shoe, flash accessories can be connected via a sync cable.
Technical Notes / Optional Accessories 119
SB-R200 Wireless Remote Speedlight
This high-performance wireless remote Speedlight has a Guide Number of 10/32 (m/ft, ISO
100, 20 °C/68 °F). Although it can not be mounted directly on the accessory shoe, the SBR200 servers as a remote flash when the built-in flash is in commander mode. It can also be
controlled using an optional SB-800 Speedlight or SU-800 wireless Speedlight commander.
The SB-R200 can be hand-held, placed on an AS-20 Speedlight stand, or mounted on the
camera lens using the SX-1 attachment for remote control and close-up i-TTL photography.
The following features are available with CLS-compatible flash units:
Speedlight
Flash mode/feature
i-TTL2, 3
AA
Auto aperture 2
A
Non-TTL auto
GN
Range-priority manual
M
Manual
RPT
Repeating flash
REAR
Rear-curtain sync
Red-eye reduction
Flash Color Information Communication
Auto FP High-Speed Sync 6
FV Lock
AF-assist for multi-area AF 2
Auto zoom
Auto ISO
Advanced Wireless Lighting
Commander
Remote
SB-800 SB-600 SB-400 SB-800 SU-800 1 SB-800 SB-600 SB-R200
✔
✔
✔
✔
✔
✔
✔
✔
—
—
—
—
✔4
✔6
✔5
✔5
—
—
—
—
—
✔5
✔5
✔4
—
—
—
—
—
—
—
✔
—
✔
✔
✔
✔
✔
✔
✔
—
—
—
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
—
—
—
—
✔
✔
✔
✔
—
—
—
—
✔
✔
✔
✔
—
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
—
—
—
—
✔
✔
✔
✔
—
—
—
—
—
✔
✔
✔
—
—
—
—
—
✔
✔
✔
1. Options shown are only available when SU-800 is used to control other 4. Use Speedlight controls to select flash mode. Non-TTL auto is selected
flash units.
automatically when a non-CPU lens is attached.
2. CPU lens required.
5. Auto aperture is selected automatically if CPU lens is attached. Non-TTL
3. Standard i-TTL for Digital SLR is used with spot metering or when se- auto is selected automatically if non-CPU lens is attached.
lected with Speedlight. Otherwise i-TTL Balanced Fill-Flash for Digital 6. Use Speedlight controls to select flash mode.
SLR is used.
The following Speedlights can be used in non-TTL auto and manual modes. If they are set to
TTL, the camera shutter-release button will lock and no photographs can be taken.
Speedlight SB-80DX, SB-28DX, SB-28,
Flash mode
SB-26, SB-25, SB-24
A
Non-TTL auto
✔
M
Manual
✔
RPT Repeating flash
✔
REAR Rear-curtain sync
✔
SB-50DX, SB-23, SB-29 1
SB-21B1, SB-29s 1
—
✔
—
✔
SB-30, SB-27 2, SB-22S, SB-22,
SB-20, SB-16B, SB-15
✔
✔
—
✔
1. Autofocus is available only with AF-Micro lenses (60 mm, 105 mm, or 2. When mounted on D80, flash mode is automatically set to TTL and shut70–180 mm).
ter release is disabled. Set Speedlight to A (non-TTL auto) mode.
120 Technical Notes / Optional Accessories
Notes on Optional Speedlights
Refer to the Speedlight manual for detailed instructions. If the Speedlight supports the Creative Lighting System, refer to the section on CLS-compatible digital SLR cameras. The D80 is not included in the
“digital SLR” category in the SB-80DX, SB-28DX, and SB-50DX manuals.
If an optional Speedlight is attached with the camera in a Digital Vari-Program mode, the flash will fire
whenever a photograph is taken. The following flash modes are available:
• P, , , , , , and modes: Fill flash and red-eye reduction. Fill flash is automatically selected
if the flash mode is set to off or auto when an optional Speedlight is attached. Auto with red-eye
reduction becomes red-eye reduction.
mode: Auto slow sync becomes slow sync, auto slow sync with red-eye reduction becomes slow
•
sync with red-eye reduction, and off becomes slow sync.
If AUTO is selected for ISO sensitivity in Digital Vari-Program modes or On is selected for Custom Setting 7 (ISO Auto) in P, S, A, or M mode, ISO sensitivity will be adjusted for optimal flash output when
an optional SB-800, SB-600, or SB-400 Speedlight is attached. This may result in foreground subjects
being underexposed in photographs taken with the flash at slow shutter speeds, in daylight, or against
a bright background. Choose a flash mode other than slow sync or choose a larger aperture.
If Auto FP High Speed Sync is used, the shutter will synchronize with an external flash at speeds of ½00 s
or slower.
i-TTL flash control can be used at ISO sensitivities between 100 and 1600. Higher values may not
produce the desired results at some ranges or apertures. If the flash-ready indicator blinks for about
three seconds after a photograph is taken, the flash has fired at full power and the photograph may
be underexposed.
The optional SB-800 and SB-600 Speedlights and SU-800 wireless Speedlight commander provide active AF assist illumination for the following focus areas:
• 24–34 mm AF lens
• 35–105 mm AF lens
The SB-800, SB-600, and SB-400 also provide red-eye reduction. With other Speedlights, the camera AF
assist illuminator is used for AF-assist illumination and red-eye reduction.
In the following modes, the maximum aperture (minimum f-number) selectable by the camera is limited according to ISO sensitivity ( 43):
Maximum aperture at ISO sensitivity of
Mode
100 125 160 200 250 320 400 500 640 800 1000 1250 1600
4
4.2 4.5 4.8
5
5.3 5.6
6
6.3 6.7 7.1 7.6
8
P, , , , , ,
5.6
6
6.3 6.7 7.1 7.6
8
8.5
9
9.5 10 11 11
For each one-step increase in sensitivity (e.g., from 200 to 400), aperture is stopped down by half an f/stop. If the maximum aperture of the lens is smaller than given above, the maximum value for aperture
will be the maximum aperture of the lens.
When an SC-series 17, 28, or 29 sync cable is used for off-camera flash photography, correct exposure
may not be achieved in i-TTL mode. We recommend that you choose spot metering to select standard
i-TTL flash control. Take a test shot and view the results in the monitor.
In i-TTL mode, use the flash panel or bounce adapter provided with the Speedlight. Do not use other
panels such as diffusion panels, as this may produce incorrect exposure. Auto power zoom is available
only with SB-800 and SB-600 Speedlights.
Technical Notes / Optional Accessories 121
Other Accessories
• Diopter adjustment viewfinder lenses: Lenses are available with diopters of –5, –4, –3, –2, 0,
+0.5, +1, +2, and +3 m–1. Use diopter adjustment lenses only if the desired focus can not
be achieved with the built in diopter adjustment control (–2.0 to +1.0 m–1). Test diopter
adjustment lenses before purchase to ensure that the desired focus can be achieved.
• DK-21M magnifying eyepiece: Increases viewfinder magnification to approximately 1.10 ×
Viewfinder (50 mm f/1.4 lens at infinity; –1.0 m–1).
eyepiece • DG-2 magnifier: Magnify the scene displayed in the center of the viewfinder for close-up
accessories photography, copying, telephoto lenses, and other tasks that require added precision.
Eyepiece adapter required (available separately).
• DK-22 eyepiece adapter: Attach the DG-2 magnifier to the D80.
• DR-6 right-angle viewing attachment: The DR-6 attaches at a right angle to the viewfinder
eyepiece, allowing the image in the viewfinder to be viewed from above when the camera is in portrait orientation.
• Nikon filters can be divided into three types: screw-in, slip-in, and rear-interchange. Use
Nikon filters; other filters may interfere with autofocus or electronic range finding.
• The D80 can not be used with linear polarizing filters. Use the C-PL circular polarizing
filter instead.
• The NC and L37C filters are recommended for protecting the lens.
Filters
• Moiré may occur if a filter is used when the subject is framed against a bright light or
when a bright light source is in the frame.
• Center-weighted metering is recommended with filters with exposure factors (filter
factors) over 1 × (Y44, Y48, Y52, O56, R60, X0, X1, C-PL, ND2S, ND4, ND4S, ND8, ND8S,
ND400, A2, A12, B2, B8, B12).
Approved Memory Cards
The following SD memory cards have been tested and approved for use in the D80. All cards
of the designated make and capacity can be used, regardless of speed.
SanDisk 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB *, 4 GB *†
128 MB, 256 MB, 512 MB, 1 GB, 2 GB *
Toshiba 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB *, 4 GB *† Lexar Platinum II: 512 MB, 1 GB, 2 GB *
Professional: 1 GB, 2 GB *
Panasonic 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB *, 4 GB *†
* If card will be used with card reader or other device, check that device sup- † SDHC compliant. If card will be used with card reader
ports 2 GB and 4 GB cards.
or other device, check that device supports SDHC.
Operation is not guaranteed with other makes of card. Contact the manufacturer for details
on the above cards.
Memory Cards
• Format memory cards in the camera before first use.
• Turn the power off before inserting or removing memory cards. Do not remove memory cards from
the camera, turn the camera off, or remove or disconnect the power source during formatting or
while data are being recorded, deleted, or copied to a computer. Failure to observe these precautions could result in loss of data or in damage to the camera or card.
• Do not touch the card terminals with your fingers or metal objects.
• Do not apply force to the card casing. Failure to observe this precaution could damage the card.
• Do not bend, drop, or subject to strong physical shocks.
• Do not expose to heat, water, high levels of humidity, or direct sunlight.
122 Technical Notes / Optional Accessories
Accessories for the D80
At the time of writing, the following accessories were available for the D80. Up to date information is available at Nikon websites or from our latest product catalogs.
Power
sources
• EN-EL3e rechargeable Li-ion battery: Additional EN-EL3e batteries are available from local
retailers and Nikon service representatives. EN-EL3a and EN-EL3 batteries can not be
used.
• MB-D80 Multi-Power battery pack: The MB-D80 takes one or two
rechargeable Nikon EN-EL3e Li-ion batteries or six AA alkaline,
Ni-MH, lithium, or nickel-manganese batteries. It is equipped
with a shutter-release button, main and sub-command dials,
and an AE-L/AF-L button for ease of use when taking photographs in tall (portrait) orientation. When attaching the MB-D80,
remove the camera battery cover as shown at right.
35°
• EH-5/EH-5a AC adapter: Use to power the camera for extended periods.
• MC-DC1 remote cord: Prevents blur caused by camera shake and
features a shutter-release button lock for long time-exposures.
When connecting the MC-DC1, open the remote cord connector cover and insert the cord as shown. To prevent water from
entering the camera, keep the remote cord connector cover
Remote
closed when not in use.
controls • ML-L3 wireless remote control: Use as a remote shutter release for self-portraits or to prevent
and cords blur caused by camera shake. The ML-L3 uses a 3 V CR2025 battery.
• BF-1A Body Cap: The BF-1A keeps the mirror, viewfinder screen, and low-pass filter free of
dust when a lens is not in place.
• Capture NX: A complete photo editing package with support for RAW images. Use the latest version.
• Camera Control Pro 2: Control the camera remotely from a computer and save photographs
Software directly to the computer hard disk.
Note: The D80 is also supported under Camera Control Pro version 1.1.0 and later. Capture
NX and Camera Control Pro automatically checks for updates if an Internet connection is
detected at startup. Be sure to update to the latest version.
Body cap
Technical Notes / Optional Accessories 123
Caring for the Camera
Storage
When the camera will not be used for an extended period, turn the camera off, replace the
monitor cover, remove the battery, and store the battery in a cool, dry area with the terminal
cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area.
Do not store the camera with naphtha or camphor moth balls or in locations that:
• are poorly ventilated or subject to humidities of over 60%
• are next to equipment that produces strong electromagnetic fields, such as televisions or
radios
• are exposed to temperatures above 50 ˚C/122 ˚F (for example, near a space heater or in a
closed vehicle in a hot day) or below –10 ˚C (14 ˚F)
Cleaning
Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off sand or salt with a cloth lightly dampCamera body
ened in distilled water and dry thoroughly. Important: Dust or other foreign matter inside
the camera may cause damage not covered under warranty.
These elements are made of glass and are easily damaged. Remove dust and lint with
Lens, mirror, a blower. If using an aerosol blower, keep the can vertical to prevent the discharge of
and viewfinder liquid. To remove fingerprints and other stains, apply a small amount of lens cleaner to
a soft cloth and clean with care.
Remove dust and lint with a blower. When removing fingerprints and other stains,
Monitor
wipe the surface lightly with a soft cloth or chamois leather. Do not apply pressure, as
this could result in damage or malfunction.
The Monitor
Should the monitor break, care should be taken to avoid injury caused by broken glass and to prevent
liquid crystal from the monitor from entering your eyes or mouth.
The Control Panel
In rare cases, static electricity may cause the control panel to brighten or darken. This does not indicate
a malfunction, and the display will soon return to normal.
124 Technical Notes / Caring for the Camera
The Low-Pass Filter
The image sensor that acts as the camera’s picture element is fitted with a low-pass filter to
prevent moiré. If you suspect that dirt or dust on the filter is appearing in photographs, you
can clean the filter as described below. Note, however, that the filter is extremely delicate
and easily damaged. Nikon recommends that the filter be cleaned only by Nikon-authorized
service personnel.
A reliable power source is required when inspecting or cleaning the low-pass filter. If
the battery level is
or below or the camera is powered by an optional MB-D80
battery pack with AA batteries, turn the camera off and insert a fully-charged EN-EL3e
battery or connect an optional EH-5/EH-5a AC adapter.
1
Remove the lens and turn the camera on. Press the MENU
2 button
to display the camera menus and select Mirror lock-up
from the setup menu (note that this option is not available at
battery levels of
or below, while recording a multiple exposure, or when using an optional MB-D80 battery pack with
AA batteries). The menu shown at right will be displayed.
Highlight On and press OK. The message shown at right will
3 be
displayed in the monitor and a row of dashes will appear in
the control panel and viewfinder. To restore normal operation
without inspecting the low-pass filter, turn the camera off.
the shutter-release button all the way down. The mirror
4 Press
will be raised and the shutter curtain will open, revealing the
low-pass filter. The display in the viewfinder will turn off and
the row of dashes in the control panel will blink.
the camera so that light falls on the low-pass filter,
5 Holding
examine the filter for dust or lint. If no foreign objects are present, proceed to Step 7.
any dust and lint from the filter with a blower. Do
6 Remove
not use a blower-brush, as the bristles could damage the filter. Dirt that can not be removed with a blower can only be
removed by Nikon-authorized service personnel. Under no
circumstances should you touch or wipe the filter.
Technical Notes / Caring for the Camera 125
the camera off. The mirror will be lowered and the shutter curtain will close. Re7 Turn
place the lens or body cap.
Use a Reliable Power Source
The shutter curtain is delicate and easily damaged. If the camera powers off while the mirror is raised,
the curtain will close automatically. To prevent damage to the curtain, observe the following precautions:
• Do not turn the camera off or remove or disconnect the power source while the mirror is raised.
• If the battery runs low while the mirror is raised, a beep will sound and the AF-assist illuminator will
blink to warn that the shutter curtain will close and the mirror will be lowered after about two minutes. End cleaning or inspection immediately.
Foreign Matter on the Low-Pass Filter
Nikon takes every possible precaution to prevent foreign matter from coming into contact with the
low-pass filter during production and shipping. The D80, however, is designed to be used with interchangeable lenses, and foreign matter may enter the camera when lenses are removed or exchanged.
Once inside the camera, this foreign matter may adhere to the low-pass filter, where it may appear in
photographs taken under certain conditions. To protect the camera when no lens is in place, be sure
to replace the body cap provided with the camera, being careful to first remove all dust and other
foreign matter that may be adhering to the body cap.
Should foreign matter find its way onto the low-pass filter, clean the filter as described above, or have
the filter cleaned by authorized Nikon service personnel. Photographs affected by the presence of
foreign matter on the filter can be retouched using Capture NX (available separately; 123) or the
clean image options available in some third-party imaging applications.
Servicing the Camera and Accessories
The D80 is a precision device and requires regular servicing. Nikon recommends that the camera be
inspected by the original retailer or Nikon service representative once every one to two years, and that
it be serviced once every three to five years (note that fees apply to these services). Frequent inspection and servicing are particularly recommended if the camera is used professionally. Any accessories
regularly used with the camera, such as lenses or optional Speedlights, should be included when the
camera is inspected or serviced.
126 Technical Notes / Caring for the Camera
Caring for the Camera and Battery: Cautions
Do not drop: The product may malfunction if subjected to Cleaning: When cleaning the camera body, use a blower to
gently remove dust and lint, then wipe gently with a soft, dry
strong shocks or vibration.
cloth. After using the camera at the beach or seaside, wipe
Keep dry: This product is not waterproof, and may malfuncoff any sand or salt using a cloth lightly dampened in pure
tion if immersed in water or exposed to high levels of huwater and then dry the camera thoroughly. In rare instances,
midity. Rusting of the internal mechanism can cause irrepastatic electricity may cause the LCD displays to light up or go
rable damage.
dark. This does not indicate a malfunction, and the display
Avoid sudden changes in temperature: Sudden changes in tem- will soon return to normal.
perature, such as occur when entering or leaving a heated
The lens and mirror are easily damaged. Dust and lint should
building on a cold day, can cause condensation inside the
be gently removed with a blower. When using an aerosol
device. To prevent condensation, place the device in a carryblower, keep the can vertical to prevent discharge of liquid.
ing case or plastic bag before exposing it to sudden changes
To remove fingerprints and other stains from the lens, apply
in temperature.
a small amount of lens cleaner to a soft cloth and wipe the
Keep away from strong magnetic fields: Do not use or store this lens carefully.
device in the vicinity of equipment that generates strong
See “ The Low-Pass Filter” ( 125) for information on cleanelectromagnetic radiation or magnetic fields. Strong static
ing the low-pass filter.
charges or the magnetic fields produced by equipment
such as radio transmitters could interfere with the moni- Storage: To prevent mold or mildew, store the camera in a dry,
tor, damage data stored on the memory card, or affect the well-ventilated area. If the product will not be used for an
product’s internal circuitry.
extended period, remove the battery to prevent leakage and
store the camera in a plastic bag containing a desiccant. Do
Do not leave the lens pointed at the sun: Do not leave the lens
not, however, store the camera case in a plastic bag, as this
pointed at the sun or other strong light source for an exmay cause the material to deteriorate. Note that desiccant
tended period. Intense light may cause the image sensor to
gradually loses its capacity to absorb moisture and should
deteriorate or produce a white blur effect in photographs.
be replaced at regular intervals.
Blooming: Vertical white streaks may appear in photographs
To prevent mold or mildew, take the camera out of storage
of the sun or other strong light sources. This phenomenon,
at least once a month. Turn the camera on and release the
known as “blooming,” can be prevented by reducing the
shutter a few times before putting it away.
amount of light that falls on the image sensor, either by
choosing a slow shutter speed and small aperture or by us- Store the battery in a cool, dry place. Replace the terminal
ing an ND filter.
cover before putting the battery away.
Do not touch the shutter curtain: The shutter curtain is extremely
thin and easily damaged. Under no circumstances should
you exert pressure on the curtain, poke it with cleaning
tools, or subject it to powerful air currents from a blower.
These actions could scratch, deform, or tear the curtain.
Notes on the monitor: The monitor may contain a few pixels
that are always lit or that do not light. This is common to all
TFT LCD monitors and does not indicate a malfunction. Images recorded with the product are unaffected.
Images in the monitor may be difficult to see in a bright
Handle all moving parts with care: Do not apply force to the bat- light.
tery-chamber, card-slot, or connector covers. These parts
Do not apply pressure to the monitor, as this could cause
are especially susceptible to damage.
damage or malfunction. Dust or lint on the monitor can be
Turn the product off before removing or disconnecting the power removed with a blower. Stains can be removed by wiping
source: Do not unplug the product or remove the battery lightly with a soft cloth or chamois leather. Should the moniwhile the product is on or while images are being recorded tor break, care should be taken to avoid injury from broken
or deleted. Forcibly cutting power in these circumstances glass and to prevent liquid crystal from the monitor touchcould result in loss of data or in damage to product memory ing the skin or entering the eyes and mouth.
or internal circuitry. To prevent an accidental interruption
Replace the monitor cover when transporting the camera or
of power, avoid carrying the product from one location to
leaving it unattended.
another while the AC adapter is connected.
Lens contacts: Keep the lens contacts clean.
Technical Notes / Caring for the Camera 127
Batteries: Dirt on the battery terminals can prevent the camera Charge the battery before use. When taking photographs on
from functioning and should be removed with a soft, dry cloth important occasions, ready a spare EN-EL3e battery and keep it
fully charged. Depending on your location, it may be difficult to
before use.
purchase replacement batteries on short notice.
Batteries may leak or explode if improperly handled. Observe
the following precautions when handling batteries:
On cold days, the capacity of batteries tends to decrease. Be sure
• Turn the product off before replacing the battery.
the battery is fully charged before taking photographs outside
• The battery may become hot when used for extended periods. in cold weather. Keep a spare battery in a warm place and exchange the two as necessary. Once warmed, a cold battery may
Observe due caution when handling the battery.
• Use only batteries approved for use in this equipment.
recover some of its charge.
• Do not expose the battery to flame or excessive heat.
Continuing to charge the battery after it is fully charged can im• After removing the battery from the camera, be sure to replace
pair battery performance.
the terminal cover.
Used batteries are a valuable resource. Please recycle used batteries in accord with local regulations.
128 Technical Notes / Caring for the Camera
Troubleshooting
If the camera fails to function as expected, check the list of common problems below before
consulting your retailer or Nikon representative. Refer to the page numbers in the rightmost column for more information.
Problem
Camera takes time to turn on.
Solution
65, 74,
105
Delete files or folders.
Adjust viewfinder focus or use optional diopter adjust17, 122
ment lenses.
Viewfinder is dark.
Insert a fully-charged battery.
12
Choose longer delays for Custom Setting 27 (Monitor
Displays turn off without warning.
98, 99
off) or 28 (Auto meter off).
Unusual characters displayed in con- See “ A Note on Electronically-Controlled Cameras,” be—
trol panel.
low.
Displays in control panel or view- The response times and brightness of these displays
—
finder are unresponsive and dim.
varies with temperature.
Fine lines are visible around active
These phenomena are normal for this type of viewfindfocus area or display turns red when
—
er and do not indicate a malfunction.
focus area is highlighted.
Menu item is not displayed.
Select Full for CSM / setup menu.
101
Rotate mode dial to another setting or insert memory
Menu item can not be selected.
card. Note that Battery info option is only available 107
when camera is powered by EN-EL3e battery.
Image size can not be changed.
Image quality set to NEF (RAW).
34
Digital Vari-Program mode selected or autoexposure
24, 94
Metering can not be changed.
lock in effect.
Exposure compensation not availChoose mode P, S, or A.
45
able.
Can not measure white balance.
Subject is too dark or too bright.
60
Image can not be selected as source
Image was not created with D80.
82
for preset white balance.
• NEF (RAW) or NEF + JPEG option selected for image
White balance bracketing unavail- quality.
34, 59,
able.
• (Choose color temp.) selected for white balance.
84
• Multiple exposure in progress.
Viewfinder is out of focus.
A Note on Electronically-Controlled Cameras
In extremely rare instances, unusual characters may appear in the control
panel and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery (note that the battery may be hot) or disconnect and reconnect the AC adapter, and turn the camera on again. If the
problem persists, turn the camera off and press the reset switch (see right;
note that this resets the clock). In the event of continued malfunction, contact your retailer or a Nikon-authorized service representative.
Reset
switch
Connector
cover
Technical Notes / Troubleshooting 129
Problem
Full range of shutter speeds not
available.
Can not select focus area.
Focus does not lock when shutterrelease button is pressed halfway.
Image in viewfinder is not in focus.
AF-assist illuminator does not light.
Shutter release is disabled.
No photo taken when remote control
shutter-release button is pressed.
Only one shot taken each time shutter-release button is pressed in continuous shooting mode.
Camera is slow to record photos.
Date of recording is not correct.
130 Technical Notes / Troubleshooting
Solution
Flash in use. If On is selected for Custom Setting 25
(Auto FP) modes P, S, A, and M, optional SB-800, SB600, and SB-R200 Speedlights can be used at all shutter
speeds.
• Unlock focus area selector.
• Auto-area AF selected for Custom Setting 2 (AFarea mode): choose another mode.
• Press shutter-release button halfway to turn monitor
off or activate exposure meters.
Use AE-L/AF-L button to lock focus when AF-C autofocus mode is selected or when photographing moving
subjects in AF-A mode.
• Rotate focus mode selector to AF.
• Camera unable to focus using autofocus: use manual
focus or focus lock.
: select another
• Mode dial rotated to , , or
mode.
• AF-assist lamp does not light for continuous-servo
autofocus. Set autofocus mode to AF-S.
• Custom Setting 2 (AF-area mode) set to Auto-area
AF or Dynamic area: select center focus area.
• Choose On for Custom Setting 4 (AF assist).
• Illuminator has turned off automatically. Illuminator
may become hot with continued use; wait for lamp
to cool down.
• Memory card is full, locked, or not inserted.
• Flash is charging.
• Camera is not in focus.
• CPU lens with aperture ring attached without locking
aperture at highest f-number.
• Non-CPU lens is attached: rotate camera mode dial to
M.
• Mode dial rotated to S after shutter speed of bulb selected in mode M: choose new shutter speed.
• Replace battery in remote control.
• Choose remote control mode.
• Flash is charging.
• Time selected for Custom Setting 30 (Remote) has
passed: reselect remote control mode.
• Bright light is interfering with remote.
98, 119
30
87
18
29, 94
31, 32
24
29
87
87
—
15
23
22
11, 117
50
48
123
38
23
99
—
• P, S, A, and M modes: lower flash.
• Digital Vari-Program modes: turn flash off.
23
40
Turn long exposure noise reduction off.
Set camera clock.
83
103
Problem
Solution
Final photo is larger than area shown Viewfinder horizontal and vertical frame coverage is
in viewfinder.
approximately 95 %.
• Lower ISO sensitivity or use high ISO noise reduction.
Randomly-spaced bright pixels
• Shutter speed is slower than 8 s: use long exposure
(“noise”) appears in photographs.
noise reduction.
Reddish areas may appear in long time-exposures.
Reddish areas appear in photos.
Turn long exposure noise reduction On when shooting at shutter speeds of “bulb” or “--”.
• Clean lens.
Photos are blotched or smeared.
• Clean low-pass filter.
• Select mode P, S, A, or M and adjust white balance to
match light source.
Colors are unnatural.
• Select mode P, S, A, or M and adjust Optimize image
settings.
Flashing areas appear in images.
Press multi selector up or down or rotate sub-comShooting data appear on images.
mand dial to choose photo information displayed.
A graph appears during playback.
RAW image is not played back.
Photo was taken at image quality of NEF + JPEG.
• Some photos are not displayed
during playback.
Select All for Playback folder. Note that Current will
• Message displayed stating that no automatically be selected when next photo is taken.
images are available for playback.
• Select On for Rotate tall.
• Photo was taken with Off selected for Auto image
rotation.
“Tall” (portrait) orientation photos
• Camera orientation was changed while shutter-reare displayed in “wide” (landscape)
lease button was pressed in continuous shooting
orientation.
mode.
• Camera was pointed up or down when photo was
taken.
• Some retouch options can not be applied to copies.
Can not retouch photo.
• Photo created or modified with other device.
Can not delete photo.
Photo is protected: remove protection.
Can not change print order.
Memory card is full or locked.
Photo is in RAW (NEF) format. Transfer to computer and
Can not select photo for printing.
print using ViewNX (supplied) or Capture NX (available
separately).
Can not print pictures via direct USB
Set USB to MTP/PTP.
connection.
Photo is not displayed on TV.
Choose correct video mode.
Can not copy photos to computer. Choose correct USB option.
Can not use Camera Control Pro 2 or • Set USB to MTP/PTP.
Camera Control Pro.
• Camera Control Pro: update software to latest version.
—
43, 83
83
83
124
125
45, 58
45, 79
62, 63
34
75
75
108
108
108
109
110
65
15, 19
67, 123
67, 104
103
67, 104
67, 104
123
Technical Notes / Troubleshooting 131
Camera Error Messages and Displays
This section lists the warning indicators and error messages that appear in the viewfinder,
control panel, and monitor.
Indicator
Control panel Viewfinder
Problem
Lens aperture ring not locked at
minimum aperture.
• No lens attached.
• Non-CPU lens attached.
Low battery.
• Battery is exhausted.
Solution
Lock ring at minimum aperture
11
(blinks)
(highest f-number).
• Attach lens (IX Nikkor excluded). 7, 117
(blinks)
• Select mode M.
50
Ready fully-charged spare battery. 12, 123
• Recharge or replace with fully- 12, 123
charged spare battery.
(blinks)
(blinks) • Battery information not avail- • Battery can not be used in cam13
able.
era.
Camera clock not set.
(blinks)
No memory card.
No memory for further photos at
current settings, or camera has
(blinks)
run out of file or folder numbers.
Camera unable to focus using
●
(blinks) autofocus.
Set camera clock.
Insert memory card.
• Reduce image quality or size.
• Delete photographs.
(blinks)
• Insert new memory card.
Recompose photo or focus manually.
• Choose lower ISO sensitivity.
• Increase shutter speed.
Subject too bright; photo will be • Choose smaller aperture (larger
overexposed.
f-number).
• Use optional Neutral Density
(ND) filter.
• Choose higher ISO sensitivity.
Subject too dark; photo will be • Decrease shutter speed.
underexposed.
• Choose larger aperture (smaller
f-number).
• Flash required for correct expo- • Raise built-in flash.
sure.
(blinks) • blinks for 3 s after flash fires: • View photo; if underexposed,
flash has fired at full power.
adjust settings and try again.
Optional Speedlight that does
Change flash control mode for opnot support i-TTL set to TTL
tional Speedlight.
(blinks) mode.
(blinks)
“bulb” selected in mode M and
(blinks)
mode dial rotated to S.
Change shutter speed or select
“--” selected in mode M and mode M.
(blinks)
mode dial rotated to S.
Press shutter-release button again.
Camera malfunction.
If error persists, consult with Nikon(blinks)
authorized service representative.
/
132 Technical Notes / Troubleshooting
103
15
33
65, 74
15
22, 32
43
48, 50
49, 50
122
43
48, 50
49, 50
23
26, 61
120, 141
48, 50
—
Monitor
NO CARD
PRESENT
CARD IS
LOCKED
THIS CARD
CAN NOT BE
USED
Indicator
Control panel Viewfinder
/
/
(blinks)
(blinks)
CARD IS NOT
FORMATTED
(blinks)
Format
No
FOLDER
CONTAINS NO
IMAGES
ALL IMAGES
HIDDEN
FILE DOES
NOT CONTAIN
IMAGE DATA
CHECK
PRINTER Continue Cancel
Problem
No memory card.
Solution
Insert memory card.
15
Memory card is locked
(write protected).
• Error accessing memory
card.
Slide card write-protect
15
switch to “write” position.
• Use Nikon-approved card.
122
• Card may be damaged. —
Contact retailer or Nikonauthorized service representative.
• Unable to create new • Delete unwanted files or in- 15, 65,
folder.
sert new memory card.
74
Memory card has not been Highlight Format and press
formatted for use in D80. OK to format memory card.
—
• Memory card is empty. • Insert another card.
• Current folder is empty. • Set Playback folder to All.
15
75
Set Playback folder to All
All photos in current folder
or use Hide image to reveal 75, 77
are hidden.
photos.
File created or modified
using computer or other Delete file or reformat mem- 16, 65,
74,
make of camera, or file is ory card.
102
corrupt.
Replace ink. If error occurs
Printer is out of ink or ink is
with ink remaining in printer, —
running low.
check printer status.
Technical Notes / Troubleshooting 133
Appendix
The Appendix covers the following topics:
• Supported Standards ...................................................................................................................................................
• Available Settings and Defaults ...............................................................................................................................
• Memory Card Capacity and Image Quality / Size ................................................................................................
• Exposure Program (Mode P).......................................................................................................................................
• Bracketing Programs....................................................................................................................................................
• White Balance and Color Temperature ..................................................................................................................
• Flash Control ...................................................................................................................................................................
• Shutter Speeds Available with the Built-in Flash ..............................................................................................
• Aperture, Sensitivity, and Flash Range..................................................................................................................
134
134
138
139
140
140
141
141
141
Supported Standards
• DCF Version 2.0: The Design Rule for Camera File Systems (DCF) is a standard widely used in
the digital camera industry to ensure compatibility among different makes of camera.
• DPOF: Digital Print Order Format (DPOF) is an industry-wide standard that allows pictures to
be printed from print orders stored on the memory card.
• Exif version 2.21: The D80 supports Exif (Exchangeable Image File Format for Digital Still
Cameras) version 2.21, a standard in which information stored with photographs is used for
optimal color reproduction when the images are output on Exif-compliant printers.
• PictBridge: A standard developed through cooperation with the digital camera and printer
industries, allowing photographs to be output directly to a printer without first transferring
them to a computer.
Available Settings and Defaults
The following table lists the settings that can be adjusted in each mode.
Shooting menu
Optimize image
Image quality 1
✔
Image size 1
✔
White balance 1
ISO sensitivity 1
✔
Long exp. NR
✔
High ISO NR
✔
Multiple exposure 1
Shooting mode 1
✔
Autofocus mode 1
✔2
Metering 1
Flexible program 1
Autoexposure lock 1
✔
Exposure compensation 1
Bracketing 1
Flash mode 1
✔2
1
Metering
1. Reset with two-button reset ( 44).
2. Reset with when mode dial is rotated to new setting.
Other settings
134 Technical Notes / Appendix
✔
✔
✔
✔
✔
✔
✔2
✔
✔2
P
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔2 ✔2 ✔2 ✔2 ✔2
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ 2, 3 ✔ 2 ✔ 2, 3 ✔ 2, 3 ✔ 2
✔
✔
3. Available with optional Speedlight only.
4. Reset with Custom Setting R (Reset).
S
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
A
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
M
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
P
S
A
M
1: Beep
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔2
✔2
✔2
✔2
✔
✔
✔
✔
✔
✔
✔
2: AF-area mode
✔2
✔2
✔2
3: Center AF area
✔
✔
✔
4: Built-in AF assist illuminator
✔
✔
5: No memory card?
✔
✔
✔
✔
✔
6: Image review
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
7: ISO auto
8: Grid display
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
9: Viewfinder warning
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
11: Exposure comp.
✔
✔
✔
✔
12: Center-weighted
✔
✔
✔
✔
13: Auto BKT set
✔
✔
✔
✔
14: Auto BKT order
✔
✔
✔
✔
15: Command dials
✔
✔
✔
✔
10: EV step
Custom Settings 4
16: FUNC button
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
17: Illumination
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
18: AE-L/AF-L
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
19: AE lock
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
20: Focus area
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
21: AF area illumination
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
22: Built-in flash
✔
✔
✔
✔
23: Flash warning
✔
✔
✔
✔
24: Flash shutter speed
✔
✔
✔
✔
25: Auto FP
✔
✔
✔
✔
26: Modeling flash
✔
✔
✔
✔
✔
27: Monitor off
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
28: Auto meter off
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
29: Self timer
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
30: Remote
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
31: Exposure delay mode
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
32: MB-D80batteries
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Technical Notes / Appendix 135
The following defaults are restored when a two-button reset is performed:
P
—
—
—
AUTO
—
—
Center
Other settings
136 Technical Notes / Appendix
S
A
JPEG Normal
L (3872 × 2592)
Shooting menu
Image quality
Image size
White balance
Fine tuning
Choose color temp.
ISO sensitivity
Multiple exposure
Shooting mode
Focus area
Focus lock
AE lock hold
Autofocus mode
Metering
Flexible program
Exposure
compensation
Bracketing
Flash mode
Flash compensation
FV lock
1. Auto slow sync.
Auto
0
5,000 K
100
Off
Single frame
—
Off
Off
AF-A
—
—
Off
—
Auto
—
—
Auto
—
—
Center
Matrix
—
Off (0.0)
—
Slow 1
Off (0 frames)
Fill flash
Off (0.0)
Off
M
The following defaults are restored with Custom Setting R (Reset):
P
Custom Settings
1: Beep
2: AF-area mode
Auto-area AF
3: Center AF area
4: Built-in AF assist illuminator
On
—
5: No memory card?
6: Image review
7: ISO auto
8: Grid display
9: Viewfinder warning
10: EV step
11: Exposure comp.
12: Center-weighted
13: Auto BKT set
14: Auto BKT order
15: Command dials
16: FUNC button
17: Illumination
18: AE-L/AF-L
19: AE lock
20: Focus area
21: AF area illumination
22: Built-in flash
23: Flash warning
24: Flash shutter speed
25: Auto FP
26: Modeling flash
27: Monitor off
28: Auto meter off
29: Self timer
30: Remote
31: Exposure delay mode
32: MB-D80 batteries
1. Max. sensitivity set to 800, Min. shutter speed set to 1/30.
On
Single Dynamic Auto-area AF
Normal frame
On
—
Release locked
On
—
Off
On
1/3 step
—
—
—
—
—
ISO display
Off
AE/AF lock
Off
No wrap
Auto
—
—
—
—
—
20 s
6s
10 s
1 min.
Off
LR6 (AA-size alkaline)
S
A
M
Single area
On
Off 1
Off
ø8 mm
AE & flash
MTR > Under > over
Off
TTL
On
1/60
Off
Off
Technical Notes / Appendix 137
Memory Card Capacity and Image Quality / Size
The following table shows the approximate number of pictures that can be stored on a 1 GB
Panasonic Pro HIGH SPEED card at different image quality and size settings.
Image quality
NEF + JPEG Fine 3
NEF + JPEG Normal 3
NEF + JPEG Basic 3
NEF (RAW)
JPEG Fine
JPEG Normal
JPEG Basic
Image size
L
M
S
L
M
S
L
M
S
—
L
M
S
L
M
S
L
M
S
File size (MB) 1
17.2
15.1
13.6
14.8
13.8
13.0
13.6
13.0
12.7
12.4
4.8
2.7
1.2
2.4
1.3
0.6
1.2
0.7
0.3
Number of images 1
54
63
72
65
71
76
72
76
78
82
133
233
503
260
446
918
503
876
1500
Buffer capacity 1, 2
6
6
6
6
6
6
6
6
6
6
23
100
100
100
100
100
100
100
100
1. All figures are approximate. File size varies with scene recorded and make of memory card.
2. Maximum number of frames that can be taken before shooting stops at ISO 100. Capacity of memory buffer
drops if noise reduction is on.
3. Image size applies to JPEG images only. Size of NEF (RAW) images can not be changed. File size is the total for
compressed NEF (RAW) and JPEG images.
138 Technical Notes / Appendix
Exposure Program (Mode P)
The exposure program for mode P is shown in the following graph.
F (lens focal length) ≤ 55 mm
135 mm ≥ F > 55 mm
F > 135 mm
Aperture
Shutter speed
The maximum and minimum values for EV vary with ISO sensitivity; the above graph assumes an ISO sensitivity of ISO 200 equivalent. When matrix metering is used, values over
16 / EV are reduced to 16 / EV.
Technical Notes / Appendix 139
Bracketing Programs
The number of shots and bracketing increment are shown in the control panel as follows:
Number of frames
Bracketing increment
Bracketing progress indicator
The Bracketing Progress Indicator and Number of Frames
Number of frames
Progress indicator
Description
3 frames: unmodified, negative, positive *
2 frames: unmodified, negative *
2 frames: unmodified, positive
* Order when Under > MTR > over is selected for Custom Setting 14 (Auto BKT order) is negative,
unmodified, positive (three frames) or negative, unmodified (two frames).
Bracketing Increment
Autoexposure and flash bracketing
Custom Setting 10 (EV Step) set to 1/3 EV Custom Setting 10 (EV Step) set to 1/2 EV
Display
Increment
Display
Increment
/ EV
/ EV
/ EV
1 EV
1 EV
1 / EV
1 / EV
2 EV
1 / EV
2 EV
White balance bracketing
Display
Increment
1
2
3
White Balance and Color Temperature
Approximate color temperatures for each white balance setting are given below (values may
differ from color temperatures given by photo color meters):
Fine tuning
White balance
None
–3
–2
–1
+1
+2
+3
Auto
3,500 K – 8,000 K
Fine tuning added to value selected by camera
Incandescent
3,000 K
3,300 K 3,200 K 3,100 K 2,900 K 2,800 K 2,700 K
Fluorescent*
4,200 K
7,200 K 6,500 K 5,000 K 3,700 K 3,000 K 2,700 K
Dir. sunlight
5,200 K
5,600 K 5,400 K 5,300 K 5,000 K 4,900 K 4,800 K
Flash
5,400 K
6,000 K 5,800 K 5,600 K 5,200 K 5,000 K 4,800 K
Cloudy
6,000 K
6,600 K 6,400 K 6,200 K 5,800 K 5,600 K 5,400 K
Shade
8,000 K
9,200 K 8,800 K 8,400 K 7,500 K 7,100 K 6,700 K
Choose color temp. 2,500 K – 9,900 K
Not available
White balance preset
—
* Color temperature range reflects wide variation among fluorescent light sources, ranging from lowtemperature stadium lighting to high-temperature mercury-vapor lamps.
140 Technical Notes / Appendix
Flash Control ( 42, 120)
The following types of flash control are supported when a CPU lens is used in combination
with the built-in flash or optional SB-800 or SB-600 Speedlights.
• i-TTL Balanced Fill-Flash for Digital SLR: Flash output is adjusted for a natural balance between
the main subject and the background.
• Standard i-TTL Fill-Flash for Digital SLR: Flash output is adjusted for the main subject; the brightness of the background is not taken into account. Recommended for shots in which the
main subject is emphasized at the expense of background details, or when exposure compensation is used.
Standard i-TTL flash control is used with spot metering or when selected with the optional
Speedlight. i-TTL balanced fill-flash for digital SLR is used in all other cases.
Shutter Speeds Available with the Built-in Flash
The following shutter speeds are available when the built-in flash is used.
Shutter speed
Mode
Shutter speed
/–/ s
/–1 s
/–/ s
S, M
/–30 s
* Slowest shutter speed at which flash will be used can be selected using Custom Setting 24 (Flash
shutter speed). Flash will still fire at shutter speeds as slow as 30 s when set to slow sync.
,
Mode
, P *, A *
Aperture, Sensitivity, and Flash Range
Flash range varies with sensitivity (ISO equivalency) and aperture.
100
1.4
2
2.8
4
5.6
7
11
16
125
1.6
2.2
3.2
4.5
6.3
9
13
18
160
1.8
2.5
3.5
5
7.1
10
14
20
200
2
2.8
4
5.6
8
11
16
22
Aperture at ISO equivalent of
250 320 400 500 640 800
2.2 2.5 2.8 3.2 3.5 4
3.2 3.5 4 4.5 5 5.6
4.5 5 5.6 6.3 7.1 8
6.3 7.1 8
9 10 11
9 10 11 13 14 16
13 14 16 18 20 22
18 20 22 25 29 32
25 29 32 — — —
Range
1000
4.5
6.3
9
13
18
25
—
—
1200
5
7.1
10
14
20
29
—
—
1600
5.6
8
11
16
22
32
—
—
m
1.0–9.2
0.7–6.5
0.6–4.6
0.6–3.2
0.6–2.3
0.6–1.6
0.6–1.1
0.6–0.8
ft.
3 ft. 3 in.–30 ft. 2in.
2 ft. 4 in.–21 ft. 4in.
2 ft.–15 ft. 1in.
2 ft.–10 ft. 6in.
2 ft.–7 ft. 7in.
2 ft.–5 ft. 3in.
2 ft.–3 ft. 7in.
2 ft.–2 ft. 7in.
In the following modes, the maximum aperture (minimum f-number) is limited according to
ISO sensitivity when the built-in flash is used:
Mode
P, , ,
100
4
5.6
125
4.2
6
160
4.5
6.3
200
4.8
6.7
Maximum aperture at ISO sensitivity of
250 320 400 500 640 800
5
5.3 5.6
6
6.3 6.7
7.1 7.6
8
8.5
9
9.5
1000 1250 1600
7.1 7.6
8
10
11
11
For each one-step increase in sensitivity (e.g., from 200 to 400), aperture is stopped down by
half an f/-stop. If the maximum aperture of the lens is smaller than given above, the maximum value for aperture will be the maximum aperture of the lens.
Technical Notes / Appendix 141
Specifications
Type
Single-lens reflex digital camera
Effective pixels
10.2 million
CCD
Image size (pixels)
23.6 × 15.8 mm; total pixels: 10.75 million
• 3,872 × 2,592 (Large)
• 2,896 × 1,944 (Medium)
Lens mount
Nikon F mount with AF coupling and AF contacts
Compatible lenses *
Type G or D Nikkor
PC-Micro Nikkor 85 mm f/2.8D
Other AF Nikkor †
AI-P Nikkor
Non-CPU
• 1,936 × 1,296 (Small)
All functions supported
All functions supported except autofocus and some exposure modes
All functions supported except 3D color matrix metering II
All functions supported except 3D color matrix metering II and autofocus
Can be used in mode M, but exposure meter does not function; electronic rangefinder
can be used if maximum aperture is f/5.6 or faster.
* IX-Nikkor lenses can not be used
† Excluding lenses for F3AF
Picture angle
Equivalent in 35mm (135) format is approx. 1.5 times lens focal length.
Viewfinder
Diopter
Eyepoint
Focusing screen
Frame coverage
Magnification
Optical fixed eye-level pentaprism
–2.0 to +1.0 m -1
19.5 mm (–1.0 m -1)
Type-B BriteView Clear Matte Screen Mark II with superimposed focus brackets and OnDemand grid lines
Approx. 95% of lens (vertical and horizontal)
Approx. 0.94 × (50 mm lens at infinity; –1.0 m -1
Reflex mirror
Quick return
Lens aperture
Instant return with depth-of-field preview
Depth-of-field preview
When CPU lens is attached, depth-of-field preview button stops aperture down to value
selected by user (A and M modes) or by camera (other modes)
Self-timer
Electronically controlled timer with 2, 5, 10 or 20 s duration
Focus-area selection
Focus area can be selected from 11 focus areas
Lens servo
• Autofocus (AF): Instant single-servo AF (AF-S); continuous-servo AF (AF-C); auto AFS/AF-C selection (AF-A); predictive focus tracking activated automatically according
to subject status
• Manual focus (M)
Storage
Media
File system
Compression
Autofocus
Detection range
AF-area mode
Focus lock
ISO sensitivity (Recommended Exposure Index)
SD (Secure Digital) memory cards; camera supports SDHC
Compliant with Design Rule for Camera File System (DCF) 2.0 and Digital Print Order
Format (DPOF)
• NEF (RAW): compressed 12-bit
• JPEG: JPEG baseline-complaint
TTL phase detection by Nikon Multi-CAM 1000 autofocus sensor module
–1.0 to +19 EV (ISO 100 at 20 °C/68 °F)
Single-area AF, dynamic-area AF, auto-area AF
Focus can be locked by pressing the shutter-release button halfway (single-servo AF) or
by pressing the AE-L/AF-L button
100 to 1600 with additional settings of up to 1 EV over 1600 in steps of / EV
142 Technical Notes / Specifications
Exposure
Metering
Matrix
Three-mode through-the-lens (TTL) exposure metering
3D color matrix metering II (type G and D lenses); color matrix metering II (other CPU
lenses); metering performed by 420-segment RGB sensor
Center-weighted
Weight of 75% given to 6, 8, or 10 mm circle in center of frame
Spot
Meters 3.5 mm circle (about 2.5% of frame) centered on active focus area
Range (ISO 100 equivalent, 0 to 20 EV (3D color matrix or center-weighted metering)
f/1.4 lens, 20 °C/68 °F)
2 to 20 EV (spot metering)
Exposure meter coupling CPU coupling
Mode
Digital Vari-Program ( auto, portrait, landscape, macro close-up, sports,
night landscape, nigh portrait); programmed auto (P) with flexible program; shutterpriority auto (S); aperture-priority auto (A); manual (M)
Exposure compensation
–5 to +5 EV in increments of / or ⁄ EV
Bracketing
Exposure and / or flash bracketing (2–3 exposures in increments of ⁄ or ⁄ EV)
Exposure lock
Exposure locked at detected value with AE-L/AF-L button
Shutter
Speed
Electronically-controlled vertical-travel focal plane shutter
30 to ⁄ s in steps of ⁄ or ⁄ EV, bulb
White balance
Auto (TTL white balance with 420-segment RGB sensor); six manual modes with fine
tuning; color temperature setting; preset white balance
2 to 3 exposures in increments of 1
Bracketing
Built-in flash
Guide number (m/ft)
Flash
Sync contact
Flash control
TTL
Auto aperture
Non-TTL auto
Range-priority manual
Flash mode
Flash-ready indicator
Accessory shoe
Nikon Creative Lighting
System
• , , , : Auto flash with auto pop-up
• P, S, A, M: Manual pop-up with button release
Approx. 13/42 at ISO 100 and 20 °C (68 °F)
X-contact only; flash synchronization at shutter speeds of up to ⁄ s
TTL flash control by 420-segment RGB sensor. i-TTL balanced fill-flash for digital SLR and
standard i-TTL fill-flash for digital SLR available with built-in flash, SB-800, and SB600.
Available with SB-800 and CPU lens
Available with such Speedlights as SB-800, 80DX, 28DX, 28, 27, and 22s
Available with SB-800
• , , : Auto, auto with red-eye reduction; fill-flash and red-eye reduction available
with optional Speedlight
• : Auto, auto slow sync, auto slow sync with red-eye reduction; slow sync and slow
sync with red-eye reduction available with optional Speedlight
• , , : Fill-flash and red-eye reduction available with optional Speedlight
• P, A: Fill flash, rear-curtain with slow sync, slow sync, slow sync with red-eye reduction,
red-eye reduction
• S, M: Fill flash, rear-curtain sync, red-eye reduction
Lights when built-in flash or SB-series Speedlight such as 800, 600, 80DX, 28DX, 50DX,
28, 27, or 22s is fully charged; blinks for about 3 s after flash is fired at full output
Standard ISO hot-shoe contact with safety lock
With SB-800, 600, and R200, supports Advanced Wireless Lighting (SB-600 and R200 only
support AWL when used as remote flash), Auto FP High-Speed Sync, Flash Color Information Communication, modeling Flash, and FV Lock.
Monitor
2.5 in., 230,000-dot, low-temperature polysilicon TFT LCD with brightness adjustment
Video output
Can be selected from NTSC and PAL
External interface
USB 2.0 Hi-speed
Tripod socket
⁄ in. (ISO)
Technical Notes / Specifications 143
Firmware upgrades
Firmware can be upgraded by user
Supported languages
Chinese (Simplified and Traditional), Dutch, English, Finnish, French, German, Italian,
Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish
Power source
• One rechargeable Nikon EN-EL3e Li-ion battery; charging voltage (MH-18a quick charger): 7.4 V DC
• MB-D80 Multi-Power battery pack (available separately) with one or two rechargeable
Nikon EN-EL3e Li-ion batteries or six LR6 alkaline, HR6 Ni-MH, FR6 lithium, or ZR6 nickel
manganese AA batteries
• EH-5/EH-5a AC adapter (available separately)
Dimensions (W × D × H)
Approx. 132 × 103 × 77 mm (5.2 × 4.1 × 3.0 in.)
Weight
Approx. 585 g (1 lb. 5 oz.) without battery, memory card, body cap, or LCD monitor cover
Operating environment
Temperature
Humidity
0 to +40 °C (+32 to 104 °F)
Less than 85% (no condensation)
Unless otherwise stated, all figures are for a camera with a fully-charged battery operating at an ambient temperature of 20 °C (68 °F).
MH-18a Quick Charger
Rated input
AC 100 to 240 V, 50/60 Hz
Rated output
DC 8.4 V / 900 mA
Supported batteries
EN-EL3e rechargeable Li-ion batteries
Charging time
Approx. 135 minutes
Operating temperature
0 to +40 °C (+32 to 104 °F)
Dimensions (W × D × H)
Approx. 90 × 35 × 58 mm (3.5 × 1.4 × 2.3 in.)
Length of cord
Approx. 1,800 mm (5 ft. 11 in.)
Weight
Approx. 80 g (2.8 oz.), excluding power cable
EN-EL3e Rechargeable Li-ion Battery
Type
Rechargeable lithium-ion battery
Rated capacity
7.4 V / 1500 mAh
Dimensions (W × D × H)
Approx. 39.5 × 56 × 21 mm (1.6 × 2.2 × 0.8 in.)
Weight
Approx. 80 g (2.8 oz.), excluding power cable
Specifications
Nikon reserves the right to change the specifications of the hardware and software described in this
manual at any time and without prior notice. Nikon will not be held liable for damages that may result
from any mistakes that this manual may contain.
144 Technical Notes / Specifications
18–135 mm f/3.5–5.6G ED AF-S DX Zoom-Nikkor Lens (Available Separately)
Type
G-type AF-S DX Zoom-Nikkor lens with built-in CPU and Nikon mount
Supported cameras
Nikon DX format digital cameras
Focal length
18 – 135 mm
Max. aperture
1 : 3.5 – 5.6
Construction
15 elements in 13 groups (including 1 ED glass element and 2 aspherical elements)
Focal length scale
18, 24, 35, 50, 70, 105, 135
Distance information
Supplied to camera body
Zoom
Zoom adjusted by rotating zoom ring
Focus
Autofocus with Silent Wave Motor; manual focus; manual focus supported when A-M
switch set to A or M. Focus can be adjusted by rotating lens focusing ring after locking
focus in single-servo autofocus. Do not use focusing ring while camera is focusing.
Closest focus distance
0.45 m (1.5 ft.) at all zoom positions
Aperture
Seven blade diaphragm with auto aperture
Aperture range
f/3.5 – 22 (at 18 mm); f/5.6 – 38 (at 135 mm)
Metering
Maximum aperture
Filter diameter
67 mm (P=0.75 mm)
Dimensions (W × D × H)
Approx. 73.5 mm diameter × 86.5 mm/2.9 × 3.4 in.
Weight
Approx. 385 g (13.6 oz.)
Lens hood
HB-32 (available separately; attaches as shown below)
The following accessories can not be used with the 18–135 mm f/3.5–5.6G ED AF-S DX: teleconverters
(all types), PK auto extension rings (all types), K rings (all types), BR-4 auto rings, bellows attachments
(all types), and SX-1 attachment rings. Other accessories may also be incompatible. See the accessory
manual for details.
Technical Notes / Specifications 145
Battery Life
The number of shots that can be taken with a fully-charged EN-EL3e battery (1500 mAh) varies with
the condition of the battery, temperature, and how the camera is used. The following measurements
were performed at a temperature of 20 °C (68 °F).
Example 1: 2,700 shots
AF-S DX 18–135 mm f/3.5–5.6G ED lens; continuous shooting mode; continuous-servo autofocus; image quality set to JPEG Basic; image size set to M; shutter speed ⁄ s; shutter-release button pressed
halfway for three seconds and focus cycled from infinity to minimum range three times; after six shots,
monitor turned on for five seconds and then turned off ; cycle repeated once exposure meters have
turned off.
Example 2: 600 shots
AF-S DX 18–135 mm f/3.5–5.6G ED lens; single-frame shooting mode; continuous-servo autofocus;
image quality set to JPEG Normal; image size set to L; shutter speed 1⁄250 s; shutter-release button
pressed halfway for five seconds and focus cycled from infinity to minimum range once; monitor
turned on for four seconds after each shot; built-in Speedlight fired at full power with every other shot;
next shot taken after exposure meters have turned off.
The following can reduce battery life:
• Using the monitor
• Keeping the shutter-release button pressed
halfway
• Repeated autofocus operations
• Taking RAW (NEF) photographs
• Slow shutter speeds
To ensure maximum battery performance:
• Keep the battery contacts clean. Soiled contacts can reduce battery performance.
• Use EN-EL3e batteries immediately after charging. Batteries will lose their charge if left unused.
• Check battery status regularly using the Battery info option in the setup menu ( 107).
The battery level displayed by the camera may vary with changes in temperature.
146 Technical Notes / Specifications
Index
Symbols
3D color matrix metering II.
See Metering
420-segment RGB sensor. See
Metering; White balance
(auto mode), 19–23
(close-up mode), 24–25
(continuous shooting
indicator), 36
(exposure compensation), 54
(flash compensation), 55
(flash-ready indicator), 23
(FV lock), 92–93
(landscape mode), 24–25
(night landscape mode),
24–25
(night portrait mode),
24–25
(portrait mode), 24–25
(remote control indicator),
38–39
(self timer indicator), 37
(sports mode), 24–25
A
A. See Aperture-priority auto
Accessories. See also Battery;
Lens; Flash, optional
optional, 116–123
supplied, 7
Adobe RGB. See Color mode
Advanced Wireless Lighting, 120
AE-L/AF-L (Custom Settings
menu), 94
AE lock (Custom Settings
menu), 94
AF-A. See Focus, autofocus,
mode
AF area illumination (Custom Settings menu), 95
AF-area mode (Custom Settings menu), 87
AF-assist illuminator, 28, 87
AF-C. See Focus, autofocus,
mode
AF-S. See Focus, autofocus,
mode
Aperture, 49–50, 141
maximum, 49, 50, 116, 121
minimum, 45, 49, 50, 132
Aperture-priority auto, 49
Audio/video (AV) cable, 66
Auto-area AF. See AF-area
mode
Auto BKT order (Custom
Settings menu), 91
Auto BKT set (Custom Settings menu), 90
Autoexposure lock, 53. See
also AE lock
Autofocus. See Focus
Auto (Flash mode), 41
Auto FP (Custom Settings
menu), 98
Auto image rotation (setup
menu), 108
Auto meter off, 18, 99
Auto meter off (Custom
Settings menu), 99
Auto mode, 19–23
B
Backlight, control panel, 3, 93
BASIC. See Image quality
Battery, 7, 12–13, 19, 123, 127.
See also Battery info; Clock,
battery; MB-D80
EN-EL3e, 7, 12–13, 123
inserting, 12–13
life, 146
storage, ii, 127
Battery info (setup menu),
107
Beep (Custom Settings
menu), 86
(bracketing indicator),
56–57
Black and white, 81
Blur, reducing, 36, 51. See also
Exposure delay mode;
Self timer; Shooting mode,
delayed remote; Shooting mode, quick-response
remote
Bracketing, 56–57, 140. See
also Exposure, bracketing;
Flash, bracketing; White balance, bracketing
Brightness. See Exposure;
Flash, level; LCD brightness;
Monitor, brightness of
Buffer size, 36
Built-in AF-assist illuminator (Custom Settings
menu), 87
Built-in flash (Custom Settings menu), 40, 95
Bulb. See Long time-exposures
Burst. See Shooting mode,
continuous
B/W. See Black and white
C
Camera Control Pro, 68, 123
Capture NX, 106, 123
Center AF area (Custom
Settings menu), 87
Center-weighted. See Center-weighted; Metering
Center-weighted (Custom
Settings menu), 90
Clock, 103, 132
battery, 103
(“clock not set” indicator), 103, 132
Close up, 24–25
CLS. See Creative Lighting
System
Color. See Color mode; Filter
effects; Hue; Saturation;
White balance
Color mode, 80
Color profile. See Color mode
Color space. See Color mode
Color temperature, 58, 59,
140. See also White balance
Command dials (Custom
Settings menu), 91
Computer, 67–68, 69
Continuous, 36
Continuous-servo AF. See
Focus, autofocus, mode
Contrast, 79–80. See also
Optimize image; Tone
compensation
Copies. See Small picture
CPU lens. See Lens, CPU
Creative Lighting System
(CLS), 119, 121
Crop, 71, 111. See also Printing; Trim
CSM/Setup menu (setup
menu), 101–102
Custom Settings, 86–100
D
Date, 14, 103. See also Clock;
World time
Daylight saving time, 103. See
also World time
DCF. See Design Rule for
Camera File System
DC-IN, 9
Default settings, 134–137. See
also Reset; Two-button reset
Delete, 26, 65, 74. See also
Memory card, formatting;
Protecting photographs
all images, 74
selected images, 74
single-frame playback,
26, 65
Delayed remote, 36, 38
Delete (playback menu), 74
Depth of field, 49
preview, 49. See also Modeling flash
Design Rule for Camera File
System, 134
Digital Print Order Format, 69,
73, 134
Digital Vari-Program, 24–25
Diopter, 17, 122. See also
Viewfinder
D-lighting, 110
D-lighting (retouch menu),
110
DPOF See Digital Print Order
Format
Dust off ref photo (setup
menu), 106–107
Dynamic area AF. See AFarea mode
E
Electronic rangefinder. See
Focus, manual
EV step (Custom Settings
menu), 89
Exif version 2.21, 134
Exposure, 52–57, 89. See also
Aperture; Aperture-priority
auto; Autoexposure lock;
Programmed auto; Shutterpriority auto; Shutter speed;
Manual mode
bracketing, 56–57, 140
compensation, 54, 55, 89
electronic analog exposure
display, 50
meters, 3, 18, 99
program, 139
Exposure comp. (Custom
Settings menu), 89
Exposure delay mode (Custom Settings menu), 99
Eyepiece cap, 3, 8, 37
F
File, 33, 35, 77, 106, 138
format, 35, 77, 134
File no. sequence (setup
menu), 106
Filter. See also Accessories,
optional; Filter effects;
Neutral Density (ND)
Filter effects (retouch
menu), 112
Firmware. See Firmware
version
Technical Notes / Index 147
Firmware version (setup
menu), 108
FINE. See Image quality
Flash
bracketing, 56–57
built in, 23, 40–42, 95
compensation, 55
level, 42, 90, 92
monitor preflash, 93, 95–97
optional, 119–121
range, 23, 119, 141
ready indicator, 23, 93, 121
remote, 119
sync speed, 42
Flash mode, 40–42
Flash shutter speed (Custom Settings menu), 98
Flash warning (Custom Settings menu), 98
Flexible program. See Programmed auto
Focus, 28–32. See also AFarea mode
area, 30, 32, 87
center, 30, 87
autofocus, 28–31
lock, 31
mode, 29–30
manual, 32
tracking, 24
Focus area (Custom Settings
menu), 94
Folder, 75, 102
playback, 75
recording, 105
Folders (setup menu), 105
Format (setup menu), 102
Framing grid, 6. See also Grid
display
Front-curtain sync, 42
FUNC button (Custom Settings menu), 92–93
FV lock, 92–93
G
Grid display (Custom Settings menu), 89
H
Hide image (playback
menu), 78
Hiding images. See Hide
image
High ISO NR (shooting
menu), 83
Highlights, 63
Histogram, 63
Hue, 80
I
Illumination (Custom Settings menu), 93
148 Technical Notes / Index
Illuminator. See Backlight,
control panel; AF-assist
illuminator
Image comment (setup
menu), 104
Image overlay (retouch
menu), 114–115
Image quality, 34
NEF (RAW), 34, 35, 69,
114–115
Image quality (shooting
menu), 81
Image review (Custom Settings menu), 88
Image sensor, 34, 46, 106, 125
dimensions of, 142
Image size, 35
Image size (shooting menu),
81
ISO auto (Custom Settings
menu), 88
ISO sensitivity, 43
auto, 43, 88
ISO sensitivity (shooting
menu), 83
i-TTL flash control, 96,
119–121, 141
J
JPEG, 33, 35, 69, 138
K
K. See Color temperature;
Number of exposures
remaining
L
L. See Image size
Landscapes. See (landscape mode);
(night
landscape mode)
Language, 14, 103
Language (setup menu), 103
LCD brightness (setup
menu), 103
Lens, 11, 21, 116–117
CPU, 117
type D, 117
type G, 117
non-CPU, 118
Lighting. See Flash; White
balance
Long exp. NR (shooting
menu), 83
Long time-exposures, 51, 123
Low-pass filter, 125–126
cleaning, 125–126
M
M. See Image size
M. See Manual mode
Manual mode, 45, 50–51
MB-D80, 100, 107, 123
MB-D80 batteries (Custom
Settings menu), 100
Mass storage. See USB, Mass
storage
Matrix. See Metering
Memory buffer, 36, 83, 138
Memory card, 15–16, 122, 138
approved, 122
capacity, 138
formatting, 16, 102
lock, 15
Menus, 74–114. See also
CSM/Setup menu
using, 9–10
Metering, 52
Mirror, 16, 106, 124, 125–126
Mirror lock-up (setup
menu), 106
Mode, 45–51. See also
Aperture-priority auto; Auto
mode; Digital Vari-Program;
Programmed auto; Manual
mode; Shutter-priority auto
Modeling flash (Custom
Settings menu), 98
Monitor, 8, 9, 61, 124
auto off, 98
brightness of, 103
cover, 8
Monitor off (Custom Settings menu), 98
Monochrome, 112. See also
Black and white
Monochrome (retouch
menu), 112
Moving subjects. See
(sports mode); Focus, autofocus, mode
MTP/PTP. See USB, MTP/PTP
Multiple exposure, 84–85
Multiple exposure (shooting menu), 84–85
N
ND. See Filter, Neutral Density
(ND)
NEF (RAW). See Image quality,
NEF (RAW)
Neutral Density. See Filter,
Neutral Density (ND)
Night photography. See
(night landscape mode);
(night portrait mode)
Nikon Transfer, 67–68
Noise, 43, 51, 83, 88. See
also High ISO NR; Long
exp. NR
No memory card? (Custom
Settings menu), 88
Non-CPU lens. See Lens,
non-CPU
NORMAL. See Image quality
NTSC. See Video mode
Number of exposures remaining, 5, 16, 19, 91
O
Off (Flash mode), 41
Optimize image (shooting
menu), 79–81
Options. See Accessories,
optional
P
P. See Programmed auto
PictBridge, 69, 71–73, 78, 134
Pictmotion, 75–77
Picture Transfer Protocol. See
USB, MTP/PTP
(flexible program indicator), 47
Playback, 26, 61–73, 74–78
full frame, 26, 61
menu, 74–78
thumbnail, 63
zoom, 64
Playback folder (playback
menu), 75
Portraits. See (portrait
(night portrait
mode);
mode); Optimize image
PRE. See White balance,
preset
Printing, 69–73. See also
PictBridge; Print set
Print set (playback menu), 78
Programmed auto, 47
Protecting photographs, 65
Q
Quality. See Image quality
Quick-response remote, 36, 38
R
RAW. See Image quality, NEF
(RAW)
Rear-curtain sync, 41
Red eye correction (retouch
menu), 111
Red-eye reduction, 41
Remote. See Accessories,
optional; Shooting mode,
delayed remote; Shooting mode, quick-response
remote
Remote cord, 123
Remote (Custom Settings
menu), 99
Reset. See Default settings;
Reset; Two-button reset
Reset (Custom Settings
menu), 86
Retouch menu, 109–115
Rotate tall (playback menu),
75
Rotating photographs, 75, 108
S
S. See Image size
S. See Shutter-priority auto
(single-frame shooting
indicator), 36
Saturation, 80
SD. See Memory card
Secure Digital. See Memory
card
Self timer, 36, 99
Self timer (Custom Settings
menu), 99
Self-portraits. See Self timer
Sensitivity. See ISO sensitivity
Sepia. See Monochrome
Setup menu, 101–108
Sharpening, 80
Shooting menu, 79–85
Shooting mode, 36–39
continuous, 36
delayed remote, 38
quick-response remote, 38
self timer, 37
single frame, 36
Shutter, 22, 48
speed, 48, 50–51. See also
Exposure
Shutter-priority auto, 48
Single area AF. See AF-area
mode
Single frame, 36
Single-servo autofocus. See
Focus, autofocus, mode
Size. See Image size
Slide show. See Slide show
Slide show (playback menu),
75–77
Slow sync, 41
Small picture (retouch
menu), 112–113
Software Suite, 67
Speedlight. See Flash
Spot. See Metering
sRGB. See Color mode
T
Television, 66
Time, 14, 103. See also Clock;
World time
Time exposure. See Long time
exposures
Thumbnail. See Playback,
thumbnail
TTL. See Built-in flash
Tone compensation, 80
Trim (retouch menu), 111
Two-button reset, 44
U
USB, 67–68, 70, 104
cable, 67, 70
Mass storage, 67–68, 70,
104
MTP/PTP, 67–68, 70, 104
USB (setup menu), 104
V
Video device, 66
Video mode (setup menu),
103
VIDEO OUT, 66
Viewfinder, 6, 8, 17, 22, 89,
122. See also Viewfinder
warning
accessories, 122
focus, 17
indicators, 6
Viewfinder warning (Custom Settings menu), 89
Viewing photographs. See
Playback
ViewNX, 34, 69, 108
W
(white balance indicator),
58–60
White balance, 58–60, 82. See
also Color temperature
bracketing, 90
preset, 59–60, 82
White balance (shooting
menu), 82
World time (setup menu),
103
Technical Notes / Index 149
%52
%N
.OREPRODUCTIONINANYFORMOFTHISMANUALINWHOLEORINPARTEXCEPTFOR
BRIEFQUOTATIONINCRITICALARTICLESORREVIEWSMAYBEMADEWITHOUTWRITTEN
AUTHORIZATIONFROM.)+/.#/20/2!4)/.
4HE.IKON'UIDETO$IGITAL0HOTOGRAPHY
WITHTHE
$)')4!,#!-%2!
%N
0RINTEDIN%UROPE
3",
-"!