Hisense HDFS80 HS tumble dryers Installation guide

Brief installation guide to dryer
Control unit
1. Press the Power button. Press and hold
for 3 seconds to power off.
2. Select a cycle.
3. Select desired option function.
4. Press Start / Pause.
Wi-Fi connection
1. Open ConnectLife on your smartphone or tablet PC;
2. Bind your device on ConnectLife as follows:
A.Click "Start here Add appliances" in "Home" page, or click "Add appliances" in "Devices" page, or click "+".
B.Select "Washing Machine" or click"Scan QR/BAR code" or "Manual entry" below.
C.Scan the QR/BAR code on the device or enter the AUID/SN manually. If you can not find it, click
for instructions.
D.Click "SET UP APPLICATION"
E.Read the instructions, operate the device into the Networking and Binding state, and click "NEXT".
F.At this time, the app starts to search for devices, and you can select the device to be connected to the network from the search
list; If it is not found, check your bluetooth whether turn on. Bluetooth should be keep it on at all time. And then click "NEXT".
G.Select your home Wi-Fi, enter the password, Then click the "CONNECT". The appliance will start networking and binding.
H.After binding successfully, you can set the device name and room.
I.Now, the device can be control remotely by APP.
*When the "
" display light on the display window is not on, you cannot remotely control the machine through the
mobile phone.To enable this function, press the "
" button on the dashboard.
">