Dolphin™ 7800 Quick Start Guide Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Für Deutsch gehe zu www.honeywellaidc.com. Ir a www.honeywellaidc.com para español. Para Português, acesse www.honeywellaidc.com.br. Перейти на русскоязычный сайт www.honeywellaidc.com. Pro češtinu jdi na www.honeywellaidc.com. Pre slovenčinu choď na www.honeywellaidc.com 如要到中国 www.honeywellaidc.com（简体）。 78-QS Rev A 11/11 Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. © 2011 Honeywell International Inc. All rights reserved. Web Address: www.honeywellaidc.com Patents For patent information, please refer to www.honeywellaidc.com/patents. Technical Assistance Contact information for technical support, product service, and repair can be found at www.honeywellaidc.com. User Documentation For localized versions of this document, and to download the User’s Guide, go to www.honeywellaidc.com. Limited Warranty Refer to www.honeywellaidc.com/warranty_information for your product’s warranty information. Out of the Box Verify that your carton contains the following items: • Dolphin 7800 mobile computer (terminal) • Main battery pack • Quick Start Guide Note: If you ordered accessories for your terminal, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the Dolphin terminal for service. Front Panel Note: Your Dolphin model may differ from the model illustrated in this guide; however, the features noted are standard for all 7800 models unless otherwise indicated. Front Speaker Charge Indicator LED General Notification LED Touch Panel Display Volume Control Buttons Left Scan/ Image Button Right Scan/ Image Button Left Soft Key SCAN Key Navigation Keys Right Soft Key Power Key or Send Call End Call Microphone Red Modifier Key Blue Modifier Key I/O Connector Back Panel Scan/Imaging Engine Window* Stylus/Stylus Slot Rear Speaker Camera Flash Stylus Tether/ Lanyard Slot Color Camera Lens Battery Release Button Battery Lock Hand Strap SIM/Memory Card Socket (located under battery) Battery Pack * LED and Laser Aimer Aperture Releasing the Hand Strap Installing the Battery Pack Dolphin 7800 model terminals are designed for use with standard battery pack model 7800-BTSC (Li-ion 3.7 V, 8.9 watt hour) and extended battery pack models 7800-BTXC and 7800-BTXCW (Li-ion 3.7 V, 14.8 watt hour) manufactured for Honeywell International Inc. The Dolphin 7800 is shipped with the battery packaged separately from the terminal. Perform the steps illustrated below to install the battery. ! Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause damage not covered by the warranty. 4 2 1 3 Note: The terminal does not power ON unless the battery is locked ! . We recommend use of Honeywell Li-ion battery packs. Use of any nonHoneywell battery may result in damage not covered by the warranty. Once the battery is installed, connect the terminal to one of the Dolphin 7800 charging peripherals to charge the battery pack. Dolphin 7800 model terminals are designed for use with the following 7800 charging devices and cables: 7800-HB, 7800-EHB, 7800-NB, 7800-CB, 7800-DEX, 7800-MB, 7800-MC, 7800-USB, and 7800-USBH. Charging the Dolphin Dolphin terminals ship with the battery significantly discharged of power. Charge the battery with a Dolphin charging device for a minimum of 4 hours for the standard battery and 6 hours for the extended battery. Note: Charge the Dolphin terminal for at least 24 hours prior to initial use to ensure the internal backup battery is fully charged. ! Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. HomeBase (Model 7800-HB) The 7800-HB charger is designed for use with Dolphin 7800 model terminals, standard battery pack model 7800-BTSC (Li-ion 3.7V, 8.9 watt hour), and extended battery pack models 7800-BTXC and 7800-BTXCW (Li-ion 3.7V, 14.8 watt hour) manufactured for Honeywell International Inc. Use only a UL Listed power supply, which has been qualified by Honeywell with output rated at 12VDC and 3 amps with the device. HomeBase Parts AUX Battery Well Power/ Dock LED AUX Battery LED COMM LED Power Adapter AC Power Cord Power Cable USB Port DC Power Jack HomeBase LED Indicators Red The HomeBase has power but no terminal is docked. Green The HomeBase has power and the terminal is properly seated in the base. Orange The auxiliary battery is charging. Green The auxiliary battery has completed charging and is ready for use. Red The internal temperature of the auxiliary battery is too Flashing hot or there is a battery error. Charge the auxiliary battery in a cooler environment or replace the battery with a new Honeywell battery. USB Port Communication Green A USB connection is established with the host workstation. Charging/Communication Cables (Model 7800-DEX, 7800-USB, and 7800-USBH) Use only a UL Listed power supply, which has been qualified by Honeywell with output rated at 5VDC and 3A with the device. Plug Adapter Plug Adapter Power Adapter Cable Host Device Client Device USB or Power Adapter Cable COMM Cable DEX Turning the Device On/Off Press the Power key to turn the terminal ON. Press and hold the Power key for approximately 5 seconds to turn the terminal OFF . Note: You should always turn the device OFF before removing the battery. Suspend Mode The terminal automatically enters Suspend Mode when the device is inactive for a programmed period of time. Press the Power or SCAN key to wake the terminal from Suspend Mode. Removing the Battery Pack 1. Turn the terminal OFF and release the hand strap. 2. Unlock the battery. 3. Wait three seconds, then slide the battery release button away from the stylus slot. 4. Remove the battery. 3 2 4 Installing the SIM Card and/or Memory Card 1. Turn OFF the terminal. 2. Release the hand strap and remove the battery pack. 3. Remove the screws and the protective shield covering the SIM/memory card socket. 4. Unlock the SIM card latch by sliding the latch toward the stylus slot. 5. Lift the latch to reveal the SIM socket and the memory card latch. Note: If a SIM card is installed, remove the card to reveal the memory card latch. 3 4 5 If you are not installing a memory card, skip to step 10. 6. Unlock the memory card latch by sliding the latch toward the top of the terminal. 7. Lift the latch to expose the memory socket. 8. Insert the MicroSD or MicroSDHC card. 6 7 8 9. Close and lock the memory card latch. 9a 9b 10. Insert the SIM card. Align the chamfered corner of the card with the chamfered corner of the socket. 11. Close and lock the SIM card latch. 10 11a 11b 12. Reinstall the shield and screws to protect the socket. 12 13. Install and lock the battery. The terminal automatically starts the power up sequence. Modifier and Navigation Keys Key Blue Function or Red The blue and red keys are used in combination with other keys to type special characters and perform system functions. The keyboard is color-coded to indicate the character typed or function performed when specific keys are pressed immediately after the blue or red modifier key. Press a modifier key once to modify only the next key pressed. Press a modifier key twice to toggle the modifier Lock ON or OFF. The shift key toggles the keyboard between uppercase and lowercase alphabet mode. Press the shift key once to modify only the next key pressed. Press the shift key twice to toggle Caps Lock ON or OFF. Move the cursor one row or line up or down. or Up Down Move the cursor one character Left or Right. or Right Left Raise the volume. Blue & Lower the volume. Blue & Move the cursor up one page. Red & Move the cursor down one page. Red & Function Keys Key Function Activates the scan and wakes the terminal from Suspend Mode. The key location allows convenient onehanded image-taking and/or bar code decoding. Answers a phone call or initiates a phone call. Ends and diconnects a phone call. or & Blue & Turns the keyboard backlight ON or OFF. Note: On terminals equipped with the 30-Key Numeric (Calculator) Keyboard, the blue modifier key must be pressed before the backlight key. Turns the flashlight on or off. Red Using the Color Camera 1. Tap > Demos > Camera Demo . 2. Point the camera lens at the object you want to capture. The camera lens is located on the back panel of the terminal. 3. Center the object in the touch screen display. 4. Press the ENT key or tap Snap on the touch screen. The general notification LED illuminates red during picture capture. Note: Tap the green arrow Tap the green box to review or edit your pictures. to exit the picture review/edit screen. Using the Scan Engine 1. Tap > Demos > Scan Demo . 2. Point the Dolphin terminal at the bar code. 3. Press and hold the SCAN key. The aiming beam or pattern appears and the general notification LED illuminates red. 4. Center the aiming beam or pattern over the bar code. Note: For optimum performance, avoid reflections by scanning the bar code at a slight angle. 5. When the bar code is successfully decoded, the general notification LED flashes green and the terminal beeps. 6. The bar code information is entered into the application in use. Aiming Beam The aiming beam is narrower when you hold the terminal closer to a bar code and the aiming beam is wider when you hold it farther from the bar code. The aiming beam must be aimed closer to symbologies that have smaller bars or elements (mil size). The aiming beam must be aimed farther from symbologies that have larger bars or elements (mil size). N5603 Red High-Vis Aiming Pattern If your Dolphin terminal is configured with a N5603 imager, high-vis aimers frame the bar code for more intuitive aiming. N5600 Green Aiming Beam Linear Bar Code 2D Matrix Symbol Resetting the Terminal There are three types of system resets: a soft reset, a hard reset, or a factory reset. The soft and hard resets preserve all data stored in the file system. Contact a Honeywell technical support representative for more information on how to perform a factory reset. Soft Reset (Warm Boot) A soft reset re-boots the device and preserves any objects created in RAM. You would perform a soft reset when: the terminal fails to respond, after installing some software applications, or after making changes to certain system settings, such as network cards. 1. Press and hold the BLUE + END keys for approximately 5 seconds. 2. The general notification LED flashes orange then green for approximately 3 seconds as the terminal resets. 3. When the reset is complete, the Home screen displays. Hard Reset (Cold Boot) A hard reset re-boots the device and closes any open applications running in RAM at the time of the reset. 1. Press and hold the BLUE 5 seconds. + SEND keys for approximately 2. The general notification LED flashes orange then green for approximately 3 seconds as the terminal resets. 3. When the reset is complete, the Home screen displays. ActiveSync Communication To synchronize data (e.g., e-mail, contacts, and calendar) between the terminal and the host workstation (PC): 1. ActiveSync® (version 4.5 or higher) or Windows® Mobile Device Center (WDMC) must be installed on your PC. You can download the most current version of ActiveSync or WDMC from the Microsoft Web site (http://go.microsoft.com/fwlink/?LinkId=147001). Note: Dolphin terminals ship with ActiveSync already installed. ActiveSync on your Dolphin terminal works with WDMC on PCs running Windows Vista or Windows 7 and with ActiveSync on PCs running Windows XP. 2. The Dolphin terminal and PC must be configured for the same communication type. 3. Connect the terminal to the PC (using a Dolphin peripheral) to initiate communication. For additional information on ActiveSync or Windows Mobile Device Center visit www.microsoft.com. ! We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.