ITSA Goal UPVC RESPECT BARRIER - metal ANCHOR Instructions

ITSA Goal UPVC RESPECT BARRIER - metal ANCHOR is a temporary barrier designed to separate spectators from players during sporting events. It features a durable UPVC construction and a metal anchor system for stability. The barrier is quick to assemble and disassemble, making it ideal for temporary set-up and removal. It is an essential safety tool for any sporting event, ensuring spectator safety without compromising the viewing experience.

PDF Download

Document

COMPONENTS
PER POST
x
1
A
FRONT GROUND ANCHOR
E
RESPECT BARRIER POST
x
1
D
ARROW HEAD NET FIXING
x
2
F
with attached LOCKING PIN
x
POST CAP
1
INSTRUCTION
SPARE PARTS TEL: 0114 242 4244
!
STEEL GROUND ANCHORS HAMMER FULL DOWN INTO THE GROUND
1. Make sure the
Steel Ground Anchor
is In line square with
the posts and hammer
fully into the ground.
2. To remove from ground
tap lightly and wiggle
left to right and lift up.
This should leave
the ground undisturbed.
68mm
NOTE Always use a
protective wood block
when hammering
with a metal mallet to
protect the shape of the
ground anchor
LIFT
UP
TAP
LIGHTLY
WITH
HAMMER
WATER
GAS
Note : If the ground is hard it is advisable to wet the ground and make a starting hole with
a metal pole before hammering the ground anchor into the ground. Damage cause in this
way will invalidate your warranty.
OPTIONAL EXTRA
CHN
FITTING
RESPECT BARRIER - CHAIN LINK WITH METAL ANCHOR
CHAIN LINK
25 Metres
E
DO NOT THROW THE LOCKING
PINS AWAY
WARNING: CHECK THE POSITION OF ANY UNDERGROUND
SERVICES BEFORE USING THE GROUND SPIKES AND
PEGS. WE TAKE NO RESPONSIBILITY FOR ANY DAMAGE
OR INJURY CAUSED IN THIS MANNER. OUR GROUND
ANCHOR SYSTEM IS DESIGNED TO GIVE SLIGHTLY UNDER
HEAVY IMPACT TO HELP PREVENT SERIOUS INJURY. TO
LOOSEN TAP SIDES OF SPIKE WITH HAMMER BEFORE
EXTRACTING.
YOU MAY NEED TO INSTALL GROUND SOCKETS FILLED
WITH SAND IF USED IN THE SAME POSITION REGULARLY.
5 METRES
LOCKING PIN
DO NOT
THROW THIS AWAY
1
2
3
Insert Arrow Head
into Holes on
posts
Push locking pin
Down centre of
Arrow Head
Ensure locking pin
Is inserted Fully in
the posts
RESPECT BARRIER POSTS WILL NOT BE REPLACED WITHIN
THE GUARANTEE PERIOD IF MISUSED. THE RESPECT BARRIER IS
ONLY A SEPARATOR BETWEEN SPECTATORS AND PLAYERS.
WORLDWIDE &copy; COPYRIGHT 2022 ITSA GOAL POSTS LTD, ALL RIGHTS RESERVED A REGISTERED DESIGN.
WE RESERVE THE RIGHTS TO AMEND THE SPECIFICATIONS OF OUR SOCCER PRODUCTS IN THE INTEREST OF CONTINUED DEVELOPMENT.
YOUR PRODUCT THEREFORE MAY DIFFER SLIGHTLY TO THOSE ILLUSTRATED. E&amp;OE
Please note: This is a temporary no load bearing quick-fit barrier to separate spectators
from players for a more permanent solution please visit itsagoal.co.uk
">

Hello! I am an AI chatbot specifically trained to assist you with the ITSA Goal UPVC RESPECT BARRIER - metal ANCHOR Instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

UPVC Construction
Metal Anchor
Quick Assembly
Easy Disassembly
Temporary Barrier
Spectator Safety

Frequently asked questions

Hammer the ground anchors fully into the ground, ensuring they are inline with the posts. If the ground is hard, wet it beforehand and create a starting hole with a metal pole. Always use a protective wood block when hammering with a metal mallet to protect the shape of the ground anchor.

The Respect Barrier serves as a temporary separator between spectators and players, ensuring a safe viewing area for all attendees.

No, the Respect Barrier is designed for temporary use only. For more permanent barrier solutions, please visit itsagoal.co.uk.

Do not throw the locking pins away. They are essential for securing the Respect Barrier and should be kept for future use.