Kirsch Alternative Woods Tilt Automation Installation Instructions

Kirsch Alternative Woods Tilt Automation offers a user-friendly experience with tilt automation for your Alternative Wood Blinds Collection. It combines sleek design with advanced technology, allowing you to conveniently control your blinds with the included remote. This device allows you to open and close your blinds easily with a simple touch, making it a great choice for busy lifestyles while adding a modern touch to your home.

PDF Download
Document
Kirsch Alternative Wood Blinds Tilt Automation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Tilt automation
  • Remote control
  • Easy installation
  • Group control
  • Favorite position
  • Calibration reset
  • Programming reset
  • Hold-down brackets
  • Magnetic valance clips

Frequently asked questions

1. Press and hold the 'STOP' button on the remote until the indicator lights blink. 2. Press the desired group number (1-6) on the remote. 3. While pressing the programming button on the blind, press the 'OPEN' button on the remote. 4. Press and hold 'STOP' on the remote until the indicator lights stop blinking.

Press and hold the programming button for 12 seconds. The blind will move slightly, and the light will flash a series of green and red colors indicating that blind programming is erased from memory.

Inside Mount: Press the valance forward until the face is flush with the opening. Outside Mount: Press the valance forward until the clips are attached to the headrail. To minimize the gap between the valance return and the wall, follow the clip projection adjustment instructions.
ALP:
Preparing document for printing…
0%