Kirsch Alternative Woods Tilt Automation III Installation Instructions

Kirsch Alternative Woods Tilt Automation III is a motorized window blind system designed for both residential and commercial applications. This system offers a sleek and modern look and can be controlled with ease using the provided remote or an app-connected device, making it easy for users to adjust the light coming into a room, creating optimal comfort and privacy. The blinds can also be programmed to automatically raise and lower throughout the day, allowing for greater energy efficiency.

PDF Download
Document
Kirsch Alternative Woods Tilt Automation III Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Motorized control
  • Remote control
  • App connectivity
  • Automatic operation
  • Tilt functionality
  • Adjustable slats
  • Various power options
  • Easy installation
  • Child safety
  • Cleanable material

Frequently asked questions

The maximum width of the blind depends on the number of intermediate brackets used. Up to 48" wide blinds do not need intermediate brackets, 48 1/8" - 60" wide blinds require one intermediate bracket, and 60 1/8" - 96" wide blinds require two intermediate brackets. Refer to the Installation Instructions for more detail.

Inside the headrail, connect the power cable (coming from the motor) into the socket on the battery wand. Place the battery wand inside the headrail, positioning its smooth, curved side toward the tiltrod. Carefully tuck excess wire into the headrail, being careful to avoid interference with internal headrail mechanisms.

To adjust the projection of the magnetic valance clips, insert a small flat blade screwdriver into the slot on one side of the magnet, making sure it is all the way down in the slot. Push the screwdriver in toward the magnet and then pull out to extend the clip. Repeat on the other side until the magnet is level. The clips offer two projection positions: 5/8" when fully compressed, and 7/8" when extended.
Preparing document for printing…
0%