AccuFit Series
AccuFit Series
The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions
in a building’s walls or ceiling. To solve some of these problematic situations SpeakerCraft has
modified models in our classic MT, DT and CRS series to include shallow enclosures designed for
space-restricted installations. These are more than just a metal cabinet attached to the baffle.
Great care has been taken to re-voice the speakers themselves so their performance is optimized in
the limited air space available. Now there is a speaker for those situations that made it impossible in
the past.
AccuFit CRS7 Three
•
•
•
•
•
•
•
•
•
•
•
•
•
AccuFit DT7 Three
7” Aluminum Cone Woofer
.75” Pivoting Aluminum Done Tweeter
Front-Mounted Treble Switch
Sealed Steel Enclosure
Timbre-Matched to All Three Series Speakers
Sensitivity: 92 dB 1W/1M
Power Handling: 125 Watts
Impedance: 8 Ohms
Frequency Response: 50Hz - 20kHz
STL (Sound Transmission Loss) Feature:
- STL @ A-weighted sound reduction: 27dBA
- Measuring signal: Pink Noise
Dimensions (Dia x D): 97⁄8” x 23⁄4”
mm = (251 x 70)
Cut-Out Diameter: 81⁄4” (210mm)
Patent Pending
• 7” Aluminum Cone Woofer
• (2) .75” Aluminum Done Tweeters
• Sealed Steel Enclosure
• Front-Mounted Treble Switch
• Timbre-Matched to All Three Series Speakers
• Sensitivity: 92 dB 1W/1M
• Power Handling: 100 Watts
• Impedance: 8 Ohms
• Frequency Response: 50Hz - 20kHz
• STL (Sound Transmission Loss) Feature:
- STL @ A-weighted sound reduction: 27dBA
- Measuring signal: Pink Noise
• Dimensions (Dia x D): 97⁄8” x 23⁄4”
mm = (251 x 70)
• Cut-Out Diameter: 81⁄4” (210mm)
• Patent Pending
AccuFit CRS7 One
AccuFit DT7 One
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
7” Polypropylene Cone Woofer
.75” Rein Coated Silk Done Tweeter
Sealed Steel Enclosure
Timbre-Matched to All One Series Speakers
Sensitivity: 92 dB 1W/1M
Power Handling: 100 Watts
Impedance: 8 Ohms
Frequency Response: 50Hz - 20kHz
STL (Sound Transmission Loss) Feature:
- STL @ A-weighted sound reduction: 27dBA
- Measuring signal: Pink Noise
Dimensions (Dia x D): 97⁄8” x 23⁄4”
mm = (251 x 70)
Cut-Out Diameter: 81⁄4” (210mm)
Patent Pending
7” Polypropylene Cone Woofer
(2) .75” Rein Coated Silk Done Tweeters
Sealed Steel Enclosure
Timbre-Matched to All One Series Speakers
Sensitvity: 91 dB 1W/1M
Power Handling: 100 Watts
Impedance: 8 Ohms
Frequency Response: 50Hz - 20kHz
STL (Sound Transmission Loss) Feature:
- STL @ A-weighted sound reduction: 27dBA
- Measuring signal: Pink Noise
Dimensions (Dia x D): 97⁄8” x 23⁄4”
mm = (251 x 70)
Cut-Out Diameter: 81⁄4” (210mm)
Patent Pending
Only SpeakerCraft offers the exclusive WavePlane™ tweeter
Our speakers sound much better off-axis!
baffle which is located just behind the tweeter of all AIM in-ceiling
speakers. The WavePlane™ creates better high frequency
dispersion. This is accomplished by allowing the tweeter to
reflect off a solid surface instead of the vibrating woofer.
Ordinary speakers only sound their best when you are directly
underneath them. This is because high frequencies are directional.
The WavePlane™ assures optimal high frequency dispersion
throughout the listening area.
* All Enclosed Speakers come with Limited LIFETIME Warranty
* As we incorporate design improvements, specifications may change without notice
940 Columbia Ave., Riverside CA 92507 • USA (800) 448 0976
Fax (951) 787 8747 International +1 951 787 0543 • www.speakercraft.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement