User manual | Portable used fluid handling equipment and fuel caddies

Model 3601
Model 3662
Model 3650
Model 3614
Model 3675
Portable used fluid handling
equipment and fuel caddies
Collection equipment – pressurized (self-evacuating). . . . . . . 170
Upright drains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Collection and transfer equipment – pump-assist . . . . . . . . . . 174
Upright drains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Fluid evacuator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Truck drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Pit drains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Diaphragm pump evacuation kits . . . . . . . . . . . . . . . . . . . . . . 183
Collection equipment – general. . . . . . . . . . . . . . . . . . . . . . . . . 185
Fluid evacuator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Pedestal drain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Drum drains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Fluid evacuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Fuel transfer pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Fuel caddies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
7
169
Portable used fluid handling equipment – collection equipment, pressurized (self-evacuating)
Used fluid collection equipment – pressurized
(self-evacuating)
Pressurized (self-evacuating) used fluid
collection equipment is common in many
automotive service shops because the reservoirs can be evacuated quickly and cleanly
without the need for external pumps or fluid
transfer systems. When a reservoir is full,
it’s typically rolled to a bulk storage access
point, where compressed air is used to force
the fluid out under pressure. All Lincoln
self-evacuating models have a built-in
regulator that reduces shopair pressure
down to a safe level for evacuation as well
as a backup safety valve to prevent over
pressurization.
Model 3635
Upright drains
Upright drains have a portable configuration
commonly used for collecting fluids under
lift-mounted vehicles. All models feature a
height-adjustable collection bowl and large
reservoir with capacity for multiple fluid
changes. A combination of two ball-bearing
swivel casters and two fixed-axle wheels
makes them portable and easy to maneuver.
Once full, they can be rolled to a bulk storage location, where compressed-shopair is
all that’s required to evacuate the reservoir.
Features:
• Standard shopair connection fitting
• Preset pressure regulator reduces inlet
pressure
• Wire reinforced dispense hose with
J-hook nozzle
• Volume level sight tube indicates fluid
level in reservoir
• Height-adjustable telescoping bowl
• Safety relief valve prevents
over-pressurization
• Screen prevents debris from entering
reservoir
170
Model 3635 25 gallon (95 liter) used
fluid drain
Model 3635 has a portable upright configuration commonly used for collecting fluids
under lift-mounted vehicles. It offers a
15 in. (381 mm) offset funnel that includes
a removable filter screen and wide-mouth
extension that increases the diameter to
24 in. (610 mm). Height is adjustable from
51 to 76 in. (1,3 to 1,9 m), not including the
extension.
Features and accessories include:
• Convenient tool tray for storing tools and
drain plugs
• 7 ft. (2,1 m) nylon-reinforced discharge
hose with steel J-hook and tethered drip
plug
• Tank-mounted clip and handle hook to
secure discharge hose
• Safety valve to prevent
over-pressurization
• Combination air chuck/pressure relief
valve
• Built-in fluid level sight gauge
Portable used fluid handling equipment – collection equipment, pressurized (self-evacuating)
3639 25 gallon (95 liter) combination
used fluid drain and evacuator
Model 3637 25 gallon (95 liter) fluid
evacuator
Model 3639 combination used fluid drain
and evacuator combines the features of
the 3635 drain and 3637 evacuator into a
single unit, giving operators the choice to
collect fluids by gravity from lift-mounted
vehicles or using a venturi to extract fluids
directly from reservoirs or through a dipstick
tube.
Model 3637 features a stable tank design
with two ball-bearing swivel casters and two
fixed-axle wheels. It also includes a tool tray
and tank-mounted clip for securing the discharge hose when not in use. Four flexible
and two rigid wands are included, as well as
dipstick tube adapters for BMW and
Volkswagen brand vehicles.
Features and accessories include:
Features
• Convenient tool tray for storing tools and
drain plugs
• 7 ft. (2,1 m) nylon-reinforced discharge
hose with steel J-hook and tethered drip
plug
• 6 1/2 ft. (2 m) wire-reinforced evacuation
hose with shut-off valve and tethered drip
plug
• Venturi vacuum assembly with vacuum
level gauge, noise reducing muffler and
shut-off valve with Milton M-style quickconnect air fitting
• Mercedes, BMW and VW dipstick tube
adapters and six evacuation wands of
varying flexibility, diameter and length
• Tank-mounted clip and handle hook to
secure discharge and evacuation hoses
• Safety valve to prevent
over-pressurization
• Combination air chuck/pressure relief
valve
• Built-in fluid level sight gauge
• 7 ft. (2,1 m) nylon-reinforced discharge
hose with steel J-hook and tethered drip
plug
• 6 1/2 ft. (2 m) wire-reinforced evacuation
hose with shut-off valve and tethered drip
plug
• Safety valve to prevent ver-pressurization
• Combination air chuck/pressure relief
valve
• Built-in fluid-level sight gauge
Model 3639
Model 3637
7
Self-evacuating upright drain technical data
Model
3635
3639
3637
Capacity
Bowl diameter
Bowl configuration
25 gal. (95 liter)
15 in. (381 mm)
Offset
25 gal. (95 liter)
15 in. (381 mm)
Offset
25 gal. (95 liter)
-
Reservoir material
Front wheels (qty. 2) – swivel casters
Rear wheels (qty. 2) – fixed-axle
Steel
4 in. (102 mm)
6 in. (152 mm)
Steel
4 in. (102 mm)
6 in. (152 mm)
Steel
4 in. (102 mm)
6 in. (152 mm)
Minimum height
Maximum height
Size
51 in. (1 295 mm)
76 in. (1 930 mm)
22 x 22 x 43.3 in.
(560 x 560 x 1 100 mm)
51 in. (1 295 mm)
76 in. (1 930 mm)
22 x 22 x 43.3 in.
(560 x 560 x 1 100 mm)
18 x 18 x 34 in.
(460 x 460 x 890 mm)
171
Portable used fluid handling equipment – collection equipment, pressurized (self-evacuating)
Model 3601
Model 3601 18 gallon (68 liter) used
fluid drain
Designed as an affordable option for used
fluid collection, model 3601 features allsteel construction and a 14 in. (355,6 mm)
diameter funnel. Height is adjustable from
45 to 72 in. (1 143 to 1 829 mm) and the
unit maneuvers on two 3 in. (76,2 mm)
ball-bearing swivel casters and two 6 in.
(152,4 mm) fixed-axle wheels.
Model 3614 20 gallon (75 liter) used
fluid drain
Model 3614
Model 3614 features a stable, low-profile
tank design and large 18 in. (457,2 mm)
offset bowl with metal filter screen. For
evacuation, the tank can be pressurized by
connecting a standard shopair hose, or by
using a simple tire chuck. The height is easily
adjustable by loosening and tightening a
friction-style lock-ring, and a special telescoping tube design eliminates the need to
extend the bowl during evacuation.
Model 3624 26 gallon (98 liter) plastic
pressurized used fluid drain
Model 3624 has a large 26 gallon
(98 liter) reservoir molded from highstrength polyethylene for lighter weight,
reduced corrosion, and lower risk of damage
to surrounding vehicles. Large recesses for
tool and filter storage are molded into the
top and drain directly into the reservoir. The
large 18 in. (457,2 mm) offset bowl includes
a removable metal filter screen and secondary debris screen.
Model 3624
172
Portable used fluid handling equipment – collection equipment, pressurized (self-evacuating)
Self-evacuating upright drain technical data
Model
3601
3614
3624
Capacity
Bowl diameter
Bowl configuration
18 gal. (68,14 liter)
14 in. (355,6 mm)
Center mount
20 gal. (75,71 liter)
18 in. (457,2 mm)
Offset
26 gal. (98,42 liter)
18 in. (457,2 mm)
Offset
Reservoir material
Front wheels (qty. 2) – swivel casters
Rear wheels (qty. 2) – fixed-axle
Steel
3 in. (76,2 mm)
6 in. (152,4 mm)
Steel
4 in. (101,6 mm)
6 in. (152,4 mm)
Polyethylene
4 in. (101,6 mm)
40 in. (1 016 mm)
Minimum height
Maximum height
Size
45 in. (1 143 mm)
72 in. (1 829 mm)
16 x 18 x 45 in.
(406 x 457 x 1 143 mm)
45 in. (1 143 mm)
71 in. (1 803 mm)
18 x 28 x 45 in.
(457 x 711 x 1 143 mm)
53 in. (1 346 mm)
79 in. (2 007 mm)
21 x 24 x 53 in.
(533 x 610 x 1 346 mm)
Optional accessories
Model 3610
Model
Name
Description
Compatible models
3610
Funnel extension
278697
Air regulator assembly
3601, 3614, 3624
613, 3644
3635, 3639
3602
Magnetic tool tray
Extends bowl diameter
to 24 1/2 in. (0,62 meter)
Replaces air chuck valve to allow
connection of shop air using a
standard Milton M-style quickchange fitting
For use with metal drains to hold
tools, small parts and fasteners
3601, 3614, 3617, 3618,
3650, 3652, 3675, 3677
Model 278697
Model 3602
173
7
Portable used fluid handling equipment – collection and transfer equipment, pump-assist
Used fluid collection and transfer equipment
– pump-assist
Model 3626
Pump-assisted used fluid collection and
transfer systems are ideal for large multibay shops and applications or environments
where movement is restricted. In these situations, a strategically located diaphragm
pump can be used to transfer fluids from
the collection equipment to a remote storage location. This type of system reduces
the risk of accidental spills and collisions,
supports remote location of bulk storage
tanks and increases productivity.
Model 3626 26 gallon (98 liter) plastic
used fluid drain
Upright drains
Model 3627 26 gallon (98 liter) plastic
coolant drain
Portable upright drains are commonly used
for collecting fluids under lift-mounted vehicles. All models feature a height-adjustable
collection bowl and 20 gallon (75 liter) reservoir. A combination of two ball-bearing
swivel casters and two fixed-axle wheels
makes them portable and easy to maneuver.
Pump-assist models feature a male camlock
connector extending from the top of the reservoir for attaching to a diaphragm pump
filter screen or other fluid transfer system.
Features
• 3/4 in. male camlock connection for
connecting to fluid transfer system
• Volume-level sight tube
• Height-adjustable bowl
• Screen prevents debris from entering
reservoir
Model 3618
174
Model 3626 has a large 26 gallon (98 liter)
reservoir molded from high-strength polyethylene for lighter weight, reduced corrosion, and lower risk of damage to surrounding vehicles. Large recesses for tool and
filter storage are molded into the top and
drain directly into the reservoir. The large
18 in. (457 mm) offset bowl includes a removable metal filter screen and secondary
debris screen.
Model 3627 offers the same features as
model 3626, except the bowl is painted
green for clear visual identification of
coolant.
Model 3618 20 gallon (75 liter) used fluid
drain
Model 3618 features a stable, low-profile
tank design and large 18 in. (457 mm) offset
bowl with metal filter screen. Bowl height is
easily adjustable by loosening and tightening
a friction-style lock-ring, and a special telescoping tube design eliminates the need to
extend the bowl during evacuation.
Model 3617 20 gallon (75 liter) coolant
drain
Model 3617 offers the same features as
model 3618, except the reservoir and
bowl are painted green for clear visual
identification of coolant.
Portable used fluid handling equipment – collection and transfer equipment, pump-assist
Pump-assisted upright drain technical data
Model
3617 – coolant (green)
3618 – used oil (red)
3626 – used oil (black)
3627 – coolant (green)
Capacity
Bowl diameter
Bowl configuration
20 gal. (75,71 liter)
18 in. (457,2 mm)
Offset
26 gal. (98 liter)
18 in. (457,2 mm)
Offset
Reservoir material
Front wheels (qty. 2) – swivel casters
Rear wheels (qty. 2) – fixed-axle
Steel
4 in. (101,6 mm)
6 in. (152,4 mm)
Polyethylene
4 in. (101,6 mm)
10 in. (254 mm)
Minimum height
Maximum height
Size
42 in. (1,067 meter)
68 in. (1,727 meter)
18 x 28 x 42 in. (457 x 711 x 1 067 mm)
53 in. (1,346 meter)
79 in. (2,007 meter)
26 x 22.4 x 42 in. (660 x 570 x 1 065 mm)
Model 3610
Model 277208
Model 276411
Model 244391
Model 244390
Model 277090
7
Model 3602
Model 278802
Model 241408
Model 241409
Optional accessories
Model
Name
Description
Compatible models
3610
277208
276411
Funnel extension
Drain spigot
Camlock coupler
Extends bowl diameter to 24 1/2 in. (622,3 mm)
Allows gravity drain from bottom of tank
3/4 in. female camlock coupler x 3/4 in. female NPT
3617, 3618
3617, 3618
3617, 3618
244391
244390
277090
Dry-break fitting
Dry-break coupler
Camlock cap
3 4
3 4
/ in. male dry-break fitting
/ in. female dry-break coupler
3/4 in. camlock cap with chain
3617, 3618
3650
3617, 3618
3602
Magnetic tool tray
For use with metal drains to hold tools, small parts and fasteners
278802
Rotary pump adapter
For use to replace the camlock evacuation connector with a rotary
pump for transfering fluid in or out of the reservoir
3601, 3614, 3617, 3618,
3650, 3652, 3675, 3677
3626, 3627
241408
241409
Coupler
Nipple
1 in. NPT (f) coupler for use in volume transfer and evacuation systems
1 in. NPT (f) nipple for use in volume transfer and evacuation systems
175
-
Portable used fluid handling equipment – collection and transfer equipment, pump-assist
Model 3650
Fluid evacuator
Evacuators utilize a powerful compressedair operated venturi vacuum for quick evacuation of fluid reservoirs. They are most
commonly used to extract oil or transmission fluid directly through the dipstick tube,
eliminating the need to lift a vehicle and
reducing the risk of spills. Pump-assist
models feature a male camlock connector
extending from the top of the reservoir for
attaching to a diaphragm pump or other
fluid transfer system.
Model 3650 20 gallon (75 liter) fluid
evacuator
Model 3650 features a stable, low-profile
tank design with two ball-bearing swivel
casters and two fixed-axle wheels. Three
flexible and two rigid wands are included, as
well as dipstick tube adapters for BMW,
Mercedes and Volkswagen brand vehicles.
Features
• 3/4 in. male camlock connection for
connecting to fluid transfer system
• 10 ft. (3 m) long wire-reinforced
evacuation hose
• Volume-level sight tube
• Vacuum-level gauge
Fluid evacuator technical data
Model
3650
Capacity
Maximum air pressure
Minimum air pressure
20 gal. (75,71 liter)
150 psi (10 bar)
90 psi (6 bar)
Maximum fluid temperature
Reservoir material
Front wheels (qty. 2) – swivel casters
176 °F (80 °C)
Steel
4 in. (101,6 mm)
Rear wheels (qty. 2) – fixed-axle
Size
6 in. (152,4 mm)
18 x 28 x 36 in. (457 x 711 x 914 mm)
176
Portable used fluid handling equipment – collection and transfer equipment, pump-assist
Model 276751
Model 276752
Model 276753
Model 276754
Model 276755
Model 276756
Model 276757
Model 276758
Standard accessories
Model
Name
Compatible models
276751
276752
276753
Mercedes oil dipstick tube adapter
BMW oil dipstick tube adapter
Volkswagen oil dipstick tube adapter
3650
3650
3650
276754
276755
276756
0.20 in. (5 mm) diameter x 31 in. (790 mm) long flexible extraction wand (red)
0.24 in. (6 mm) diameter x 31 in. (790 mm) long flexible extraction wand (clear)
0.31 in. (8 mm) diameter x 31 in. (790 mm) long flexible extraction wand (yellow)
3650
3650
3650
276757
276758
278363
0.20 in. (5 mm) diameter x 31 in. (790 mm) long rigid extraction wand
0.24 in. (6 mm) diameter x 31 in. (790 mm) long rigid extraction wand
0.20 in. (5 mm) diameter x 28 in. (700 mm) long, rigid extraction wand
3650
3650
3637, 3639
278364
278365
278366
0.23 in. (6 mm) diameter x 28 in. (700 mm) long, rigid extraction wand
0.20 in. (5 mm) diameter x 28 in. (700 mm) long, flexible extraction wand
0.23 in. (6 mm) diameter x 28 in. (700 mm) long, flexible extraction wand
3637, 3639
3637, 3639
3637, 3639
278367
278368
278369
0.31 in. (8 mm) diameter x 28 in. (700 mm) long, flexible extraction wand
0.28 in. (7 mm) diameter x 39 in. (1 000 mm) long, flexible extraction wand
BMW adapter
3637, 3639
3637, 3639
3637, 3639
278370
VW adapter
3637, 3639
Model 277208
Model 276411
Model 244391
Model 244390
Model 278697
Model 3602
Optional accessories
Model
Name
Description
Compatible models
277208
276411
244391
Drain spigot
Camlock coupler
Dry-break fitting
Allows gravity drain from bottom of tank
3/4 in. female camlock coupler x 3/4 in. female NPT
3/4 in. male dry-break fitting
3650
3650
3650
244390
278697
Dry-break coupler
Air regulator assembly
3650
3635, 3639
3602
Magnetic tool tray
/ in. female dry-break coupler
Replaces air chuck valve to allow connection of shop air
using a standard Milton M-style quick-change fitting
For use with metal drains to hold tools, small parts and fasteners
3 4
177
3601, 3614, 3617, 3618,
3650, 3652, 3675, 3677
7
Portable used fluid handling equipment – collection and transfer equipment, pump-assist
Low-profile truck drains
Model 3665
Low-profile truck drains offer a low-profile
design that can be easily positioned under
high-clearance vehicles for capturing used
fluids including motor oil, coolant and transmission fluid.
Features
• Low-profile design – only 7 3/4 in.
(197 mm) tall
• Large 20 x 29 in. (510 x 735 mm)
recessed area for capturing fluid
• Removable metal screen keeps out parts
and debris
• Recessed pockets at each corner provide
storage for drain plugs and filters.
Model 3667
Model 3667 17 gallon (65 liter) truck
drain
Features a rotary hand pump mounted
horizontally to the front of the reservoir and
a 6 ft. (1,8 m) long discharge hose with a
steel J-hook installed at the outlet. Fluid is
discharged from the reservoir by manually
operating the pump.
Model 3669 17 gallon (65 liter) truck
drain
Features a durable 120 V electric pump installed below the front of the reservoir. The
pump operates when plugged into a standard power outlet and discharges fluid
through a 6 ft. (1,8 m) hose with steel
J-hook.
Model 3665 17 gallon (65 liter) truck
drain
Features a 6 ft. (1,8 m) long discharge hose
with a 3/4 in. camlock style connector and
cap. The hose extends from the bottom of
the reservoir and can be connected to diaphragm pump or other fluid transfer system
to evacuate fluid from the reservoir.
Model 3669
Truck drain technical data
Model
3665
3667
3669
Capacity
Overall height
Reservoir material
17 gal. (65 liter)
7.75 in. (195 mm)
Polypropylene
17 gal. (65 liter)
7.75 in. (195 mm)
Polypropylene
17 gal. (65 liter)
7.75 in. (195 mm)
Polypropylene
Wheels (qty. 4) – pivoting
Size (handle not included)
4 in. (100 mm)
44 x 28 x 7.5 in.
(1 120 x 710 x 190 mm)
–
4 in. (100 mm)
60 x 28 x 7.5 in.
(1 525 x 710 x 190 mm)
1 gal. (3,8 liter)/15 revolutions
4 in. (100 mm)
60 x 28 x 7.5 in.
(1 525 x 710 x 190 mm)
1 gal. (3,8 liter)/minute
(10W-30 at room temperature)
2.6 gal. (9,8 liter)/minute (antifreeze)
Pump output
178
Portable used fluid handling equipment – collection and transfer equipment, pump-assist
Truck drain
Model 84714
Truck drains feature a low-profile design for
collecting used fluids under RVs, trucks and
other off-road equipment, without the need
for a lift or jack. A long T-handle extending
from the front of the reservoir allows the
user to conveniently maneuver the drain
into position. Once full, the reservoir can be
emptied by gravity or with the use of an
external pump.
Features
• Low profile design – only 8 1/2 in.
(216 mm) tall
• Internal baffles and 2 in. (50,8 mm) wide
lip reduces splash
• Removable metal screen keeps out parts
and debris
• Dual female 3/4 in. NPT drain ports
Model 84714 20 gallon (75 liter) truck
drain
Model 84714 features heavy-duty welded
steel construction and a unique three-wheel
design that allows the operator to steer the
drain into position. A front port located at
the bottom of the reservoir allows fluid to
drain by gravity, while a second port located
on the back is designed for evacuation using
an external pump. Two internal baffles and a
2 in. (50,8 mm) wide lip around the top of
the reservoir reduces splash during draining
and movement.
7
Truck drain technical data
Model
84714
Capacity
Overall height
Ground clearance
20 gal. (75,71 liter)
8.5 in. (216 mm)
3/4 in. (19 mm)
Reservoir material
Front wheels (qty. 1) – pivoting
Rear wheels (qty. 2) – fixed axle
Steel
4 in. (101,6 mm)
6 in. (152,4 mm)
Drain ports
Size (handle not included)
3 4
/ in. female NPT
36 x 23.5 x 8.5 in. (914 x 597 x 216 mm)
179
Portable used fluid handling equipment – collection and transfer equipment, pump-assist
Model 4105
Model 277208
Model 244391
Model 244390
Model 276411
Model 277645
Model 277090
Optional accessories
Model
Name
Description
Compatible models
4105
277208
276411
Evacuation kit
Drain spigot
Camlock coupler
3/4 in. camlock kit for pump-assist evacuation through lower port
Allows gravity drain through lower port
3/4 in. female camlock coupler x 3/4 in. female NPT
84714, 276411
84714
277645
277645
277090
244391
Camlock fitting
Camlock cap
Dry-break fitting
3 4
3 4
/ in. male camlock fitting x 3/4 in. male NPT
/ in. camlock cap with chain
3/4 in. male dry-break fitting
84714, 276411
277645, 4105
84714
244390
Dry-break coupler
3 4
/ in. female dry-break coupler
180
244391
Portable used fluid handling equipment – collection and transfer equipment, pump-assist
Pit drains
Model 3662
Pit drains are designed for track-mounting
in service pits or drive over applications.
Two wheels extend from each side of the
reservoir on axles that can be adjusted to
fit varying track widths. Reservoirs have two
opposing 3/4 in. NPT ports for connecting to
an external evacuation pump and/or for
connecting multiple drains in tandem. All
models feature heavy-duty steel construction with internal baffles to reduce splash
and a removable steel debris screen.
Features
• Four wheel and axle assemblies extend
and lock to fit varying track widths
• Internal baffles reduce splash during
movement
• Removable steel screen keeps out parts
and debris
• Shutoff valve and 3/4 in. male camlock
connector with dust cap included
Model 84700
Model 3662 13 gallon (50 liter) pit drain
Features a compact, low-profile design
for applications with restricted clearance.
Reservoir is made from drawn steel with
rounded corners. A handle is welded to
each end for improved maneuverability.
Model 84700 30 gallon (115 liter) pit
drain
7
Large capacity welded steel reservoir glides
smoothly on 4 in. (101,6 mm) diameter
polyurethane wheels. Includes model 92572
removable splash shield to focus oil stream
into reservoir.
Pit drain technical data
Model
3662
84700
Capacity
Overall height
Track width
13 gal. (49,2 liter)
8 in. (203 mm)
28 to 50 in. (711 to 1 270 mm)
30 gal. (113,6 liter)
9.3 in. (236 mm)
36 to 49.5 in. (914 to 1 257 mm)
Reservoir material
Wheel quantity
Wheel diameter
Steel
4
2 in. (50,8 mm)
Steel
4
4 in. (101,6 mm)
Drain ports
Size
3 4
/ in. male NPT
32.3 x 24.5 x 8 in.
(820 x 622 x 203 mm)
/ in. male NPT
36 x 28 x 9.3 in.
(914 x 711 x 236 mm)
3 4
181
Portable used fluid handling equipment – collection and transfer equipment, pump-assist
Model 276411
Model 244391
Model 244390
Optional accessories
Model
Name
Description
Compatible models
276411
244391
244390
Camlock coupler
Dry-break fitting
Dry-break coupler
3 4
3 4
/ in. female camlock coupler x 3/4 in. female NPT
/ in. male dry-break fitting
3/4 in. female dry-break coupler
277645
3662, 84700
244391
182
Portable used fluid handling equipment – collection and transfer equipment, pump-assist
Diaphragm pump evacuation
kits
Diaphragm pump kits provide a clean, safe
method for evacuating used fluids from collection equipment such as portable drains
and evacuators, and pumping it through an
enclosed system to a remote storage tank.
Any type of used fluid equipment fitted with
a 3/4 in. camlock coupler can be easily connected to the pump and evacuated. Kits include an air-operated double-diaphragm
pump with wall-mount bracket, as well as
all recommended air supply, fluid extraction
and fluid discharge fittings, components and
accessories.
Model 4102 1 in. non-UL diaphragm
pump evacuation kit
Model 4100
Features 1 in. non-UL aluminum doublediaphragm pump (model 85627), recommended for transferring non-flammable liquids including transmission fluid, coolant,
and washer fluid.
Model 4104 1/2 in. non-UL diaphragm
pump evacuation kit
Features 1/2 in. non-UL aluminum doublediaphragm pump (model 85631), for transferring non-flammable liquids including
transmission fluid, coolant, and washer fluid.
Features
• Premium air-operated double-diaphragm
pump for long maintenance free
operation
• Large inlet T-strainer prevents debris
from entering the pump
• Designed for use with all Lincoln pumpassist fluid collection equipment
• For diaphragm pump specifications
(† page 98).
Model 4104
Model 4100 1 in. UL-listed diaphragm
pump evacuation kit
Features 1 in. UL-listed aluminum doublediaphragm pump (model 85634), recommended for transferring flammable liquids
including used oil, ATF fluid, diesel and
kerosene.
7
Diaphragm pump evacuation kit technical data
Model
Pump
Model
Description
Body material
Wetted or soft parts
Max. recommended air pressure
Suction connector
Discharge outlet
Air inlet size
4100
4102
4104
85634
1 in. (25,4 mm)
Aluminum
Buna-N
50 psi (3,4 bar) flammable liquids
125 psi (8,6 bar) others
85627
1 in. (25,4 mm)
Aluminum
Buna-N
125 psi (8,6 bar)
85631
1/2 in. (12,7 mm)
Aluminum
Buna-N
100 psi (6,9 bar)
/ in. female camlock
/ in. male NPT
3/8 in. male NPT
3 4
3 4
/ in. female camlock
/ in. male NPT
3/8 in. male NPT
3 4
3 4
3 4
3 4
183
/ in. female camlock
/ in. male NPT
/ in. male NPT
1 4
Portable used fluid handling equipment – collection and transfer equipment, pump-assist
Model 276291
Model 277645
Model 277090
Model 273607
Model 274879
Model 84816
Model 84815
Model 84824
Model 4110
Model 85257
Model 4105
Optional accessories
Model
Name
Description
Compatible models
276291
277645
277090
Camlock fitting
Camlock fitting
Camlock cap
3 4
3 4
/ in. male camlock fitting x 3/4 in. female NPT
/ in. male camlock fitting x 3/4 in. male NPT
3/4 in. camlock cap with chain
4100, 4102, 4104
4100, 4102, 4104
276291, 277645, 4105
273607
274879
4105
Ball valve
Check valve
Evacuation kit
3 4
3 4
/ x 3/4 in. ball valve for backflow prevention
/ x 3/4 in. check valve for backflow prevention
3/4 in. camlock drain conversion kit
4100, 4102, 4104
4100, 4102, 4104
4100, 4102, 4104
84816
4-way valve
4100, 4102, 4104
84815
Overfill warning valve
84824
Overfill warning valve
Four port, two-position valve enables one pump to evacuate and dispense fluid
from a single tank. Ports are 1 in. NPT.
For single-wall tanks and drums. Sounds whistle and shuts off air-supply when
fluid rises above preset level. Requires connection to compressed air. 1/4 in. NPT
air inlet and outlet ports.
For double-wall tanks. Sounds whistle and shuts off air-supply when fluid rises
above preset level. Requires connection to compressed air. 1/4 in. NPT air inlet
and outlet ports.
4110
Dipstick evacuation kit
85257
Wall-mount bracket
Enables diaphragm pump to be used for fluid evacuation from reservoirs or through
dipstick tube. Includes 10 ft. (3 m) suction hose, five evacuation wands and wand
holder. For wand specifications († page 169).
For use with 1/4, 1/2 and 1 in. diaphragm pumps (included with models 4100, 4102
and 4104).
184
4100, 4102, 4104
4100, 4102, 4104
4100, 4102, 4104
4100, 4102, 4104
Portable used fluid handling equipment – collection equipment, general
Used fluid collection equipment – general
Model 3652
Model 3652 6 gallon (22 liter) fluid
evacuator
Combines a compact, portable tank design
with a powerful compressed-air operated
venturi vacuum for quick, clean, and convenient extraction of engine oil or transmission fluid through the dipstick tube, or for
other general fluid extraction needs. Three
flexible and two rigid wands are included, as
well as dipstick tube adapters for BMW,
Mercedes, and Volkswagen brand vehicles.
Tank is emptied by removing a wide-mouth
cap and tilting to pour.
Features
• Portable 6 gallon (22 liter) capacity
heavy-duty welded steel tank
• 10 ft. (3 m) long wire-reinforced
evacuation hose
• Rolls smoothly on two 5 in. (13 cm) fixed
axle wheels with rubber treads
• Easy-to-read volume level sight tube
• Vacuum level gauge
7
Model 3652 technical data
Model
3652
Capacity
Maximum air pressure
Minimum air pressure
6 gal. (22 liter)
150 psi (10 bar)
90 psi (6 bar)
Maximum fluid temperature
Reservoir material
Wheels (qty. 2) – fixed-axle
176 °F (80 °C)
Steel
5 in. (127 mm)
Size
14 x 14 x 29.8 in. (356 x 356 x 757 mm)
185
Portable used fluid handling equipment – collection equipment, general
Model 276751
Model 276752
Model 276753
Model 276754
Model 276755
Model 276756
Model 276757
Model 276758
Standard accessories for model 3652
Model
Name
276751
276752
276753
Mercedes oil dipstick tube adapter
BMW oil dipstick tube adapter
Volkswagen oil dipstick tube adapter
276754
276755
276756
0.20 in. (5 mm) diameter x 31 in. (790 mm) long flexible extraction wand (red)
0.24 in. (6 mm) diameter x 31 in. (790 mm) long flexible extraction wand (clear)
0.31 in. (8 mm) diameter x 31 in. (790 mm) long flexible extraction wand (yellow)
276757
276758
0.20 in. (5 mm) diameter x 31 in. (790 mm) long rigid extraction wand
0.24 in. (6 mm) diameter x 31 in. (790 mm) long rigid extraction wand
Model 3602
Optional accessories
Model
Name
Description
3602
Magnetic tool tray
For use with metal drains to hold 3601, 3614, 3617, 3618,
tools, small parts and fasteners
3635, 3637, 3639, 3650
186
Compatible models
Portable used fluid handling equipment – collection equipment, general
Model 3605 4.5 gallon (17 liter) pedestal
drain
Model 3605
The combined light weight and slim size of
model 3605 make it easy to position and
maneuver under lift-mounted vehicles, and
convenient to store in shops with limited
space. The 13 in. (330,2 mm) diameter,
4 1/2 gallon (17 liter) capacity bowl has a
hinged cover that extends to catch streaming oil. When full, the bowl is lifted off the
stand and placed onto a specially designed
adapter that opens a spring-actuated valve,
allowing fluid to drain into a drum or storage
tank. The stand has a quick-release latch
that automatically locks at the desired
height.
Features
• Hinged lid opens to catch oil stream
• Self-locking, quick-release height
adjustment latch
• Spring-actuated drain valve
• Includes automatic drain adapter for
containers with 2 in. bung opening
7
Pedestal drain technical data
Model 82460
Model
3605
Capacity
Bowl diameter
Bowl configuration
4 1/2 gal. (17 liter)
13 1/2 in. (343 mm)
Center mount
Reservoir material
Minimum height
Maximum height
Steel
46 in. (1 168 mm)
76 in. (1 930 mm)
Base diameter
18 in. (457 mm)
Model 83386
Standard accessories
Model
Name
Description
82460
Drain adapter
83386
Bowl assembly
Opens spring-actuated valve to allow fluid to drain from bowl.
Fits containers with 2 in. bung openings.
13 in. (343 mm) diameter, 4 1/2 gallon (17 liter) bowl with hinged
lid and spring-acutated drain valve
187
Portable used fluid handling equipment – collection equipment, general
Model 613DK
Drum drains
Model 613 16 gallon (60 liter) drum drain
Drum drains utilize a standard 16 gallon/
120 lb. (60 liter/54 kg) steel drum as a fluid
reservoir. They have a portable upright configuration commonly used for collecting fluids under lift-mounted vehicles. All models
include a collection bowl, lid assembly with
fluid level gauge and height-adjustable tube,
and 17 in. (432 mm) square base with four
2 1/2 in. (63,5 mm) ball-bearing swivel casters. Drains can be emptied using a gravity
spigot (included with model 613DK) or
pump-assist evacuation kit 247748 (sold
separately).
Same as 613DK except without drum. User
must supply standard 16 gallon/120 lb.
(60 liter/54 kg) drum and drain spigot.
Model 3644 16 gallon (60 liter) drum
drain
Same as model 613 except with 20 in.
(508 mm) diameter steel drain bowl. User
must supply standard 16 gallon/120 lb.
(60 liter/54 kg) drum and drain spigot.
Features
• Simple yet durable heavy-duty steel
construction
• Volume level indicator
• Height-adjustable from 42 to 68 in.
(1 067 to 1 727 mm)
• Models available with and without drum
Includes drum
Model 3644
Model 613DK 16 gallon (60 liter) drum
drain
Complete drum drain kit including 16 gallon/
120 lb. (60 liter/54 kg) steel drum, 14 in.
(355,6 mm) diameter drain bowl, and
gravity spigot.
Drum not included
Drum drain technical data
Model
613DK
613
3644
Capacity
Bowl diameter
Drum included
16 gal. (60 liter)
14 in. (355,6 mm)
Yes
16 gal. (60 liter)
14 in. (355,6 mm)
No
16 gal. (60 liter)
20 in. (508 mm)
No
Wheels (qty. 4) – swivel caster
Minimum height
Maximum height
4 in. (101,6 mm)
42 in. (1 067 meter)
68 in. (1 727 mm)
4 in. (101,6 mm)
42 in. (1 067 meter)
68 in. (1 727 mm)
4 in. (101,6 mm)
42 in. (1 067 meter)
68 in. (1 727 mm)
Size
17 x 17 x 42 in.
(432 x 432 x 1 067 mm)
17 x 17 x 42 in.
(432 x 432 x 1 067 mm)
17 x 17 x 42 in.
(432 x 432 x 1 067 mm)
188
Portable used fluid handling equipment – collection equipment, general
Model 91197
Model 82786
Model 3608
Model 66493
Model 70526
Model 247748
Optional accessories
Model
Name
Description
Compatible models
91197
82786
3608
14 in. (356 mm) diameter bowl
14 in. (356 mm) diameter bowl with lid
20 in. (508 mm) diameter bowl
Standard on models 613 and 613DK; optional on model 3644
Includes hinged lid with latch
Standard on model 3644; optional on models 613 and 613DK
613, 613DK, 3644
613, 613DK, 3644
613, 613DK, 3644
66493
16 gallon/120 lb. (60 liter/54 kg) drum
613, 613DK, 3644
70526
Drain spigot
247748
Diaphragm pump evacuation kit
Steel drum with 1 in. NPT port for drain spigot. Standard on model
613DK; optional on models 613 and 3644
Gravity drain spigot with 1 in. male NPT. Standard on model 613DK;
optional on models 613 and 3644
Includes fluid pick-up tube and 3/4 in. male camlock fitting for connection to
diaphragm pump or other fluid transfer system. Installs to lid so that fitting
extends straight up
Model 615 suction gun
cm3)
of fluid. FlexHolds up to 18 oz. (532
ible nozzle for transmission, differential or
oil filter service. Precision follower fitted to
barrel for superior suction and is impervious
to oil, grease and water. Finished in rustresistant, powder coated blue paint.
Model G150 suction gun
17 oz. (503 cm3) capacity with 12 in.
(304,8 mm) flex hose. Perfect for draining
and filling differentials, clutches, power
steering reservoirs and transmissions.
Needs no priming. Features heavy-duty
steel barrel, electro-static, corrosion-resistant finish and non-slip knurling.
Model 615
Model G150
189
613, 613DK, 3644
613, 613DK, 3644
7
Portable used fluid handling equipment – collection equipment, general
Model MV7400
Model MV7201
Fluid evacuator features
Model MV7300 PneumatiVac
• Convenient manual or compressed air
pump operation
• Integrated reservoir
• Large base with foot stabilizer
• Durable, chemical-resistant polyethylene
construction
• Automatic overflow prevention
• Quick-drain pour spout
Operates on compressed air to create a
powerful venturi vacuum for draining fluids
from tanks and reservoirs. Compressed air
hose attaches at base for stability. Includes
accessories for draining engine oil or transmission fluid directly through the dipstick
tubes. Also includes brake/clutch bleeding
kit (model MVA7205) for vacuum bleeding
hydraulic brake and clutch systems.
Model MV7400 fluid evacuator
Vacuum is created quickly and efficiently by
manual pump operation, offering superior
mobility by eliminating the need for electricity or compressed air. The MV7400 is ideal
for draining fluids from reservoirs on boats,
RVs, ATVs, snowmobiles, farm equipment or
motorcycles. Includes accessories for draining engine oil or transmission fluid directly
through the dipstick tubes.
Model MV7300
Model MV7201 fluid evacuator plus
At the push of a button, this versatile unit
changes from vacuum to pressure for evacuating or dispensing fluids. This functionality
makes it ideal for draining tanks or reservoirs then pumping the used fluid back out
for easy disposal. Multiple units work great
– simply evacuate used fluids with one unit
and then quickly refill with new fluid from a
second. For superior mobility, the MV7201
utilizes a manual pump, so compressed air
or electricity is not required. Accessories are
included for draining engine oil or transmission fluid directly through the dipstick tubes.
Fluid evacuator technical data
Model
MV7400
MV7201
MV7300
Reservoir capacity
Maximum operating temperature
Packaged weight
1.9 gal. (7,3 liter)
175 °F (80 °C)
7.5 lbs. (3,4 kg)
2.3 gal. (8,8 liter)
175 °F (80 °C)
10.0 lbs. (4,5 kg)
2.3 gal. (8,8 liter)
175 °F (80 °C)
7.5 lbs. (3,4 kg)
Compressed air inlet size
Size (height x width x depth)
–
25 x 7.5 in. (height x diameter)
(635 x 190 mm [height x diameter])
–
24 x 12.4 x 9.3 in.
(610 x 315 x 235 mm)
1/4 in. NPT
24 x 12.4 x 9.3 in.
(610 x 315 x 235 mm)
190
Portable used fluid handling equipment – fuel transfer pump
Fuel transfer pump
Model 1550
Lincoln’s model 1550 fuel transfer pump
quickly delivers diesel, kerosene or mineral
spirits from both mobile and stationary
tanks. Its durable cast-iron housing, longlife, low-friction vanes, special seal design,
UL-listed motor and stainless steel outlet
adapter provide reliability in even the
harshest environments.
The pump’s unique, three-piece, telescoping pick-up tube is suitable for a wide
range of tank depths and designs, and its
360-degree, locking bung enables the
operator to properly position the pump.
Model 1550 fuel transfer pump
• Self-priming, cast-iron pump
• Insulated, weatherproof design
• Stainless steel 90-degree hose adapter
• 1 in. (25,4 mm) pump inlet and outlet
offer high flow rate
• 360-degree, locking bung for proper
positioning
• Three-piece telescoping pick-up tube
for varying tank depths
• Pre-wired, heavy-gauge, 18 ft. (5,5 m)
cable for operator convenience
• 13 ft. (4 m), commercial-grade,
kink-resistant, anti-static hose
• Long-life, low-friction polymer vanes
provide extended service intervals
7
Fuel transfer pump technical data
Model
1550
Voltage
Flow rate
Pump inlet/outlet
Hose connection
12 V DC
15 gal./min. (57 l/min.)
1 in. (25,4 mm) NPT
3/4 in. (19 mm) NPT
Power cord length
Duty cycle
Locking bung
Hose
18 ft. (5,5 m) with heavy-duty connectors
30 min.
Yes
13 ft. x 3/4 in. ID (4 m x 19 mm ID)
UL-listed motor
Inlet filter
Outlet adapter
Yes
Yes
Stainless steel
191
Portable used fluid handling equipment – fuel caddies
Model 3675
Fuel caddies
Model 3677
Fuel caddies are designed for the safe transfer and storage of fuel before, during and
after repairs requiring the removal of a vehicle’s fuel tank. They feature a portable yet
stable, upright configuration and robust
steel construction. Fuel is transferred using
a bi-directional manual rotary pump installed on a leak-tested 25 gallon
(95 liter) welded-steel reservoir. A 7 ft.
(2.1 m) long wire-reinforced hose extending
from the caddy can be snaked down the filler neck or through an alternative opening in
the fuel tank. Additional features include an
internal volume-level sight gauge, firescreened vent cap, anti-spark aluminum
skid pads, two 8 in. (203 mm) diameter rubber wheels, manual pour-in filler neck and
safety ground wire.
Fuel is extracted or dispensed by turning
the pump handle in forward or reverse
directions.
Features
• Premium 2-way rotary pump dispenses
fuel at a rate of 1 gallon (4 liters) per 12
revolutions
• Specially designed for use with unleaded
gasoline, kerosene and diesel fuels
• 100% leak-tested welded-steel tank
• Portable, tilt-to-roll design requires minimal floor space
192
Model 3675 25 gallon (95 liter) fuel caddy
Designed for safety and convenience, tanks
are 100% leak tested, while special components keep the unit grounded to reduce the
risk of spark and fire. A fire-screened vent
cap prevents pressurization.
Model 3677 25 gallon (95 liter) fuel caddy
with 2-way filter
Same as model 3675, but includes 2-way
filter system to prevent fuel recontamination. The filter system (model 3612) installs
under the handle and uses check valves to
direct the flow of fuel in and out of the tank
through two independent spin-on style filters. Filters are replaceable, standard 3/4 in.
spin-on canister style.
Portable used fluid handling equipment – fuel caddies
Fuel caddy technical data
Model
3675
3677
Capacity
Reservoir material
Pump output – revolutions/gal. (liter)
25 gal. (95 liter)
Steel
12
25 gal. (95 liter)
Steel
12
Wheels (qty. 2)
Hose length
Size
8 in. (203 mm) diameter
7 ft. (2 134 mm)
22.5 x 20.5 x 44 in. (572 x 521 x 1 118 mm)
8 in. (203 mm) diameter
7 ft. (2 134 mm)
22.5 x 20.5 x 44 in. (572 x 521 x 1 118 mm)
7
Model 3612
Model 277464
Model 3602
Optional accessories
Model
Name
Description
Compatible with
3612
2-way filter system
3675, 3677
277464
3602
Replacement filter
Magnetic tool tray
Filters fuel through independent replaceable filters. Standard on model 3677;
optional on model 3675
1 in.-12 UNF spin-on style fuel filter, 3/4 in. (19 mm) opening
For use with metal drains to hold tools, small parts and fasteners
193
3612, 3677
3601, 3614, 3617, 3618,
3650, 3652, 3675, 3677

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project