User manual | Datasheet_RF

4 button controller - keychain RF KEY
• The key alarm is used to control switches and dimmers (lights, gate, garage door, blinds, etc.).
• When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down).
• Sending a command is indicated by a red LED.
• Designed in black and white with laser printing.
• Four buttons enable control of four units independently.
• Option of setting light scenes, where with a single press, you can control units of iNELS RF Control.
• Battery power supply (3V/CR2032 - included in the supply) with battery life of around 5 years based on
frequency of use.
• Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal
repeater RFRP-20.
• Communication frequency with bidirectional protocol iNELS RF Control.
Technical parameters
Supply voltage:
Transmission indication:
Number of buttons:
Transmitter frequency:
Signal transmission method:
Range in free space:
Other data
Operating temperature:
Operating position:
Color design:
Protection:
Contamination degree:
Dimensions:
Weight:
Related standards:
RF KEY/W
RF KEY/B
3V CR 2032 battery
red LED
4
868 MHz, 915 MHz, 916 MHz
unidirectionally addressed message
up to 200 m
Device description
Transmitter indication
Control buttons
Control buttons
-10 to +50 °C
any
black
IP 20
2
64 x 25 x 10 mm
16 g
EN 60669, EN 300 220, EN 301 489
R&TTE Directive, Order. No 426/2000 Coll. (Directive 1999/EC)
white
13

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project