dedicated LCD display solutions

User Manual

17” FHD LCD

AP-F17

Aluminum front bezel

NAP-F17

Front NEMA4 / IP65

OP-F17

Universal Mounting Open Frame

Designed and manufactured by Austin Hughes

UM-UV-621-F17-Q116V2 www.austin-hughes.com

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

■

Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■

Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■

When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

■

When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■

Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■

If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■

Observe all precautions and warnings attached to the equipment.

■

If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■

Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, fi re or electrical shock.

■

Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty.

■

If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.

What the warranty does not cover

■

Any product, on which the serial number has been defaced, modifi ed or removed.

■

Damage, deterioration or malfunction resulting from:

□

Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or failure to follow instructions supplied with the product.

□

Repair or attempted repair by anyone not authorized by us.

□

Any damage of the product due to shipment.

Removal or installation of the product.

□

Causes external to the product, such as electric power fl uctuation or failure.

Use of supplies or parts not meeting our specifi cations.

□

Normal wear and tear.

Any other causes which does not relate to a product defect.

■

Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■

Re-position or relocate the receiving antenna.

■

Increase the separation between the equipment and receiver.

■

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

UM-UV-621-F17-Q116V2 www.austin-hughes.com

Contents

< Part. 1 >

AP-F17 / NAP-F17

1.1

1.2

1.3

Package Content

Structure Diagram & Dimension

Mounting Hardware & Installation

< Part. 2 >

OP-F17

2.1

2.2

2.3

Package Content

Structure Diagram & Dimension

Mounting Hardware & Installation

< Part. 3 >

Specifi cations / OSD / Remote Controller

3.1

3.2

Product Specifi cations

On-screen Display Operation ( OSD )

< Part. 4 >

Options

4.1

4.2

4.3

4.4

4.5

4.6

4.7

Option Table

3G / HD / SD-SDI Broadcast-grade input

MCS

Multi-display control solution

AV3.0

Upgrade : HDMI, S-Video + BNC & Audio

Projected Capacitive ( 10-point touch )

Resistive ( single point touch )

DC Power : 12V / 24V / 48V / 110 ~ 125V

MIL-type or lockable connector

P.1

P.2 - 3

P.4 - 5

P.6

P.7 - 8

P.9

P.10 - 11

P.12

P.13

P.14

P.15

P.16 - 17

P.18 - 19

P.20

P.21

UM-UV-621-F17-Q116V2 www.austin-hughes.com

Before Installation

■

It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■

Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor

Caution :

■

To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■

When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■

Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.

■

Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■

Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

1

Disconnect the power cord.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfi ber cloth fi rst, not directly on the parts you are cleaning.

UM-UV-621-F17-Q116V2 www.austin-hughes.com

< Part 1 >

< 1.1 > Package Content - AP / NAP-F17

AP-F17 / NAP-F17

17” FHD LCD display X 1

6ft VGA cable X 1

Power adapter X 1

Power cord X 1

Mounting hardware X 1 pack

- Mounting bracket x 4 pcs

- M4* 6mm screw x 8 pcs

- M4* 50mm screw x 8 pcs

Basic I/O

Power DVI-D VGA

AV3.0 upgrade I/O with advanced features

Power BNC S-Video

Audio

DVI-D out - in - in

Video PC

HDMI

VGA

- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio

- On-chip Faroudja® DCDi Cinema processing

< 1.2 > Structure Diagram - AP / NAP-F17

1

2

3

4

17" FHD LCD Display

Front view

AP-F17

NAP-F17

5

7

Rear view

1

Rear case

2

LCD panel

3

Protective 3mm glass

4

6mm aluminum front bazel

5

6

Audio speaker, pair

LCD membrane

7

Remote sensor

6

Model

AP-F17

NAP-F17

Product Dimension

(W x D x H)

468.5 x 57.1 x 331 mm

18.4 x 2.2 x 13 inch

Packing Dimension

(W x D x H)

615 x 113 x 523 mm

24.2 x 4.4 x 20.6 inch

Net

Weight

5.2 kg

11.4 lbs

Gross

Weight

8 kg

17.6 lbs

< 1.2 > Dimension - AP / NAP-F17

Front View

AP-F17

NAP-F17

Side View

Rear View

UNIT : mm

1mm = 0.03937 inch

Bottom View

< 1.3 > Panel Mount Installation - AP / NAP-F17

1

Mounting bracket x 4 pcs

2

M4*6mm screw x 8 pcs

17" FHD LCD Display

3 M4*50mm screw x 8 pcs

Hardware set part no. UV-BK#2

Steps

■

Install 4 mounting brackets with 8 x M4*6mm screws

■

Adjust the LCD panel with 8 x M4*50mm screws and fi x it on the surface.

< 1.3 > VESA mount Installation - AP / NAP-F17

M4 screw

VESA mount ( 100*100mm )

■

Hardware and M4*4 pcs for VESA mount are not provided

< Part 2 >

< 2.1 > Package Content - OP-F17

OP-F17

17" FHD LCD Display

17” FHD LCD display X 1

6ft VGA cable X 1

Power adapter X 1

Power cord X 1

Basic I/O

AV3.0 upgrade I/O with advanced features

Power BNC S-Video

Audio

DVI-D out - in - in

Video PC

HDMI

VGA

- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio

- On-chip Faroudja® DCDi Cinema processing

< 2.2 > Structure Diagram - OP-F17

1

2

1

Rear case

2

LCD panel

3

Audio speaker, pair

4

Universal open frame mounting

5

LCD membrane

6

Extended remote sensor membrane cable

( 66cm from AD board to sensor end )

Front view

OP-F17

3

Rear view

6

4

5

Model

OP-F17

Product Dimension

(W x D x H)

465.5 x 50.6 x 328 mm

18.3 x 2 x 12.9 inch

Packing Dimension

(W x D x H)

615 x 113 x 523 mm

24.2 x 4.4 x 20.6 inch

Net

Weight

3.4 kg

7.5 lbs

Gross

Weight

6.2 kg

13.6 lbs

< 2.2 > Dimension - OP-F17

Front View

OP-F17

17” FHD LCD Display

Side View

Rear View

UNIT : mm

1mm = 0.03937 inch

Bottom View

< 2.3 > Installation - OP-F17

( I ) Universal mount

( II ) VESA mount ( 100*100mm )

M4 screw

Hardware and M4*4 pcs for VESA mounting are not provided

< Part 3 >

< 3.1 > Product Specifi cations

Mechanical

Design

LCD

Panel

Front Panel

Rear Casing

VESA Mounting

Other Mounting

Protection

Panel Size ( diagonal )

Display pixel ( dots x lines )

Brightness ( typ. )

Contrast Ratio ( typ. )

Color

Viewing Angle ( L/R/U/D )

Response Time ( ms )

Dot pitch ( mm )

Display Area ( mm )

Surface treatment

Surface hardness

Backlight Type

MTBF ( hrs )

AP / NAP-F17

Black, RAL 9005

Black, RAL 9005

100 x 100mm

Panel mount

3mm protective glass

17” FHD LCD Display

OP-F17

-

Black, RAL 9005

100 x 100mm

Universal mount

-

17.3-inch Widescreen TFT color LCD

1920 x 1080

400

600:1

16.7 M, 8-bit

80/80/60/80

40

0.1989

381.888H x 214.812V

Anti-glare, Hard-coating

3H

LED

50,000

Video

Connectivity

Digital

Analog

Plug & Play

Synchronization

HDMI

DVI

VGA

Composite ( RCA )

S-Video ( 4-pin )

DVI / VGA

VGA

HDMI 1.1, CEA-861-D

DVI-D, TMDS single link

Analog 0.7Vp-p

NTSC & PAL

NTSC & PAL

VESA EDID structure 1.3

Separate, Composite & SOG

Audio

Connectivity

Audio Input

Audio Output

Connector 3.5mm stereo jack

Impedance / Power level 30kΩ / 750mV

Connector 3.5mm stereo jack

Speaker

Resistance / Power level 30kΩ / 2.8V

Dual Stereo Speaker 2W x 2

*When the audio output is connected, speaker output is OFF

Power

Power Supply

Range

Power Consumption

Screen ON

Power saving mode

Power button OFF

Auto-sensing 100 to 240VAC,

50 / 60Hz

Max. 25W

Max. 4W

Max. 1W

Regulatory

Safety

Environmental

Environmental

Conditions

Operating

Storage / Non-operating

FCC & CE certifi ed

RoHS2 & REACH compliant

Temperature

Humidity

Altitude

Temperature

Humidity

Altitude

Shock

Vibration

0 to 55°C degree

20~90%, non-condensing

16,000 ft

-20 to 60°C degree

5~90%, non-condensing

40,000 ft

10G acceleration (11ms duration)

5~500Hz 1G RMS random

Physical

Specifi cation

Applicable

Format

Product ( W x D x H )

Packing ( W x D x H )

Net Weight

Gross Weight

DVI-D / VGA Input

HDMI Input

AP / NAP-F17

468.5 x 57.1 x 331 mm

18.4 x 2.2 x 13 inch

615 x 113 x 523 mm

24.2 x 4.4 x 20.6 inch

5.2 kgs / 11.4 lbs

8 kgs / 17.6 lbs

PC Signal

PC Signal

Video Signal

OP-F17

465.5 x 50.6 x 328 mm

18.3 x 2 x 12.9 inch

615 x 113 x 523 mm

24.2 x 4.4 x 20.6 inch

3.4 kgs / 7.5 lbs

6.2 kgs / 13.6 lbs

1920 x 1080 x 60Hz

1360 x 768 x 60Hz

1280 x 1024 x 60 / 75Hz

1280 x 960 x 60Hz

1280 x 768 x 60 / 75Hz

1152 x 864 x 75Hz

1024 x 768 x 60 / 70 / 75Hz

848 x 480 x 60Hz

800 x 600 x 60 / 72 / 75Hz

720 x 400 x 70Hz

640 x 480 x 60 / 72 / 75Hz

640 x 400 x 70Hz

640 x 350 x 70Hz

Same as VGA

720p : 50 / 60Hz

Audio Signal 2ch Linear PCM ( 32 / 44.1 / 48 KHz )

< 3.2 > On-screen Display Operation ( OSD )

17” FHD LCD Display

Power light

Green = On

Orange = Power saving

Membrane Switch Function

Power on / off LCD

Display the OSD menu

Scrolls through menu options and adjusts the displayed control

(To auto adjustment by pressing the button for 5 seconds)

Exit the OSD screen

Toggle analog, digital & video connection (DVI-D and video options only)

OSD Confi guration Page

Image:

for the brightness, contrast, color temp, red, green, and blue

Geometry:

for the auto adjust, H position, V position, phase and clock

Video:

for the colour, tint, sharpness, noise reduction, DCDi and TV Setup

Audio:

for volume, bass, treble, balance, AVL and mute

Misc:

for the language, OSD position, graphic mode, ratio, reset and timer

< Part 4 > Options

< 4.1 > Option Table

Options

SDI ***

HDMI *

S-Video * + Composite ( BNC )

Audio

Touchscreen

MCS multi-display control

DC Power

MIL-type / lockable connector

AP / NAP OP

***

About SDI

( 1 ) The AD board will be upgraded to version 3.0, and this comes standard with HDMI, DVI-D, VGA,

S-Video, BNC, audio inputs and RC-1 remote controller.

*

About HDMI

( 1 ) If the user needs HDMI and DVI-D, AV3.0 upgrade can be applied.

( 2 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio

signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card

setting on display size to fi x the issue.

< 4.2 > Options : 3G / HD / SD-SDI input

17” FHD LCD Display

Austin Hughes’ SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market.

Designed for use with UltraView Full HD 1080p and ultra high resolution 1920 x 1200 LCD displays, Austin Hughes provides a

SDI input module without using additional space or power and it comes standard with a 2-year warranty.

SDI

Power BNC S-Video

Audio

DVI-D VGA

HDMI out - in - in

Video PC out - in

***

For SDI option, the AD board comes standard with HDMI, DVI-D, VGA, S-Video, BNC, audio inputs

and RC-1 remote controller ( please refer to P.17 )

INPUT

3G-SDI IN

3G-SDI OUT

BNC x 1 / 0.8Vp-p ( 75 ohm )

BNC x 1 / Active through, equalized & relocked

Standard Compliance

Compatible Video Format

Video

Audio

3G-SDI

HD-SDI

SD-SDI

ITU-R BT.656

SMPTE 425M / 274M / 296M / 125M

ITU-R BT.656

SMPTE 299M / 272M-C

1080p

1080p

1080i

720p

1080p

1080i

720p

@60 / 50Hz, 4:2:2

@30 / 25 / 24Hz, 4:4:4

@60 / 50Hz, 4:4:4

@60 / 50Hz, 4:4:4

@30 / 25 / 24Hz, 4:2:2

@60 / 50Hz, 4:2:2

@60 / 50Hz, 4:2:2

480i @60Hz, 4:2:2

576i @50Hz, 4:2:2

Compatible Audio Format

3G-SDI

HD-SDI

SD-SDI

Max. Transmission Distance

75 ohm coaxial cable

3G-SDI

HD-SDI

SD-SDI

48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video

48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video

48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /

Asynchronized Video

150m at 2.97Gb/s

250m at 1.485Gb/s

480m at 270Mb/s

< 4.3 > Options : MCS

MCS

( Multi-display Control )

More control is always good. Especially when it is necessary and easy. Austin Hughes provides MCS solution to control the OSD of various UltraView LCD display up to 64 units.

The RS-232C is used for the communication between the PC and the fi rst display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters.

Designed for use with UltraView LCD displays, Austin Hughes provides a MCS input module without using additional space or power and it comes standard with a 2-year warranty.

MCS

DVI-D VGA

Power

BNC S-Video

Audio

HDMI out - in - in

Video PC set out

***

Please download the protocol of MCS control at :

http://www.austin-hughes.com/support/usermanual/ultraview/UM-UV-MCS.pdf in Link

RS-232C

15 feet serial cable

( over 15 feet, extender required )

Set switch

For the 1st and last display, push the set switch upward

For other daisy chain displays, push the set switch downward

RJ-45 jack

LINK OUT

Cat5 / 6 cable max. 300 meters

IN OUT IN

Cat5 / 6 cable max. 300 meters

OUT

Cat5 / 6 cable max. 300 meters

IN OUT

Daisy chain up to 1,000 meters and 64 displays up to 64 displays

< 4.4 > AV3.0 Upgrade Options :

- HMDI

( HDMI 1.1, CEA-861-D )

- AV

( S-Video + Composite, BNC )

- Audio

( Built-in Dual Stereo Speakers, 2W x 2 )

( 3.5mm audio jacks for audio in & out )

Power BNC S-Video

Audio

HDMI out - in - in

Video PC

DVI-D VGA

17" FHD LCD Display

***

( 1 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio

signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card

setting on display size to fi x the issue.

( 2 ) AV3.0 upgrade option comes with RC-1 remote controller x 1, please refer to P.17

How to Use RC-1 Remote Controller

1

2

3

4

1

2

3

POWER

MUTE

AV

7

8

9

4

5

6

0- 9

V + / -

CH + / -

MENU

AUTO

- / -

5

6

7

Switches on or off the TV

Turn on or off the speaker

Switch to AV mode

Select channels. For channel numbers 10 and above, enter the second digit within two seconds.

Increase or decrease the speaker volume

Increase or decrease the channel number

Display the menu on the screen or go to the previous menu

For auto searching

For setting one or two input digit

8

9

< 4.5 > Options : Touchscreen & driver

F17" USB Touchscreen Specifi cation

Model

Technology

Touch Point

Input Type

Resolution

Touch Point Accuracy

Response Speed

Activation Force

Surface Hardness

Light Transmission

Haze

Durability

Top Layer

Bottom Layer

Thickness

Connector

Compatibility

F17TPC-10

Multi-touch

Projected Capacitive

10

USB

4096 x 4096

± 2 mm

< 5 ms

< 5 g

6H

> 85%

3% ↓

50 million touches

1.8 mm Glass

0.7 Sensor Glass

2.7 ± 0.1 mm

USB

Linux / Android / Windows / Mac

17" FHD LCD Display

TRB

e-Resistive

5-Wire Resistive

Single

Finger or Stylus

2048 x 2048

-

15 ms

≤ 50 g

3H

80% ± 3%

8% ± 3%

10 million touches

ITO Film

ITO Glass

2.2 ± 0.2 mm

USB Type A

Windows 7 / XP / Vista, Linux

■

Dimension will be changed if Multi-touch required

■

USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc

■

For detailed information, please refer to the attached CD disc

■

As the touchscreen unit is not made of toughened glass, please handle it carefully

Power

USB Touchscreen

HDMI

DVI-D VGA

< 4.5 > Options : Touchscreen & driver

F17TPC-10 Driver

Connect the USB cable from the USB port on the LCD to a computer. The touch screen supports easy Plug-and-Play operations. There is no need to install additional drivers on the computer.

TRB Driver

Please follow the below steps to setup the touch screen:-

Step 1.

Run the bundled CD disc or download the driver from the link below :

http://www.austin-hughes.com/resources/driver/ultraview

Step 2.

Double click the Setup.exe

Step 3.

Follow the installation instruction to fi nish the setup

Step 4.

After installation, run the TouchKit program & the “4 point calibration”

Please do the initial calibration after the fi rst setup

< 4.6 > Options : DC Power

Model

Input rating

Input voltage:

Input range:

Input current

- No load

- Full load

Output rating

Output voltage:

Output current:

Effi ciency

12V

12-Volt

9 ~ 18V

50 mA

4950 mA

12-Volt

4.16A

84%

24V

24-Volt

18 ~ 36V

50 mA

2450 mA

12-Volt

4.16A

85%

48V

48-Volt

36 ~ 75V

50 mA

1220 mA

12-Volt

4.16A

85%

17" FHD LCD Display

110 ~ 125V

110-Volt

66 ~ 160V

40 mA

993 mA

12-Volt

8.4A

92%

< 4.7 > Options : MIL-type or Lockable Connector

MIL - type

Connector

Lockable

Connector

Input

DC Power

***

( Male )

Part no.

MS3470W8-33P

VGA

***

( Male )

MS3470W14-15P

MIL Standard

MIL - DTL - 26482

MIL - DTL - 26482

***

There are several additional MIL DC and VGA connector types with varying design

characteristics to meet cost considerations and to provide users with the most

design fl exibility possible. For more information, please contact us.

Input

DC Power

( Male )

Part no.

YM-Ext-461CP001

Standard

D-type 3W3

USB LUSB - A111 - 00 -

***

MIL - type or Lockable connectors above can be integrated with our LCD displays.

Sale service just for connectors not provided.

The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication.

All brand names, logo and registered trademarks are properties of their respective owners.

Copyright 2016 Austin Hughes Electronics Ltd. All rights reserved.

UM-UV-621-F17-Q116V2 www.austin-hughes.com