American Standard 0643.008.020 Studio Drop- In Sink Spec Sheet

STUDIO

®

DROP IN SINK

VITREOUS CHINA

BARRIER FREE

STUDIO ® DROP IN SINK

❏ 0643.008 Faucet holes on 8" (203mm) centers

(illustrated)

❏ 0643.001 Center hole only

• Rectangular self-rimming drop in sink

• Made from vitreous china

• Front overflow

• Cutout template supplied

• Faucet ledge (Faucet not included)

• Shown with Moments 2506.821 Widespread Faucet

(Not included)

Nominal Dimensions:

21-1/4" x 17-3/4" x 6-1/2"

(539 x 451 x 166mm)

Bowl sizes:

18" (457mm) wide

12" (305mm) front to back

4-1/2" (114mm) deep

FINISHED

WALL OR

BACKSPLASH

9-7/8"

(251mm)

2-1/4"

(57mm)

17-3/4"

(451mm)

8"

(203mm)

2" MIN.

(51mm)

4"

(84mm)

24"

(610mm)

3/4"

(19mm)

21-1/4"

(539mm)

COUNTERTOP

6-1/2"

(166mm)

10-3/4"

(273mm)

12-1/2"

(318mm)

33-5/8"

(854mm)

SUGGESTED

FINISHED

FLOOR

1-1/4"

O.D.

WASTE

8"

(203mm)

5-5/8"

(142mm)

SUPPLIES

AS

REQUIRED

1-1/4" OD

TAILPIECE

34"

(864mm)

32-3/4"

(834mm)

8" MIN.

(203mm)

27" MIN.

(686mm) 6" MAX.

(152mm)

BARRIER FREE

CLEARANCE

9" MIN.

(229mm)

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous

China Fixture

NOTES:

* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP

ARE SUGGESTED.

FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE

TEMPLATE SUPPLIED WITH SINK.

FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

SEALING COMPOUND SUPPLIED BY OTHERS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

To Be Specified:

❏ Color: ❏ White

❏ Faucet*:

❏ Faucet Finish:

❏ Supplies:

❏ 1-1/4" Trap:

* See faucet section for additional models available

© 2014 AS America Inc.

J50

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ICC ANSI A117.1 ACCESSIBLE AND USABLE

BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Install lavatory 864mm (34") from finished floor.

Lavatory installed 51mm (2") minimum from front edge of countertop provides 686mm (27") knee clearance area.

Rev. 10/14